首页 |元器件品牌

DF1B-10DP-2.5DS [HRS]

Board Connector, 10 Contact(s), 2 Row(s), Male, Right Angle, 0.098 inch Pitch, Solder Terminal, White Insulator, Receptacle;
DF1B-10DP-2.5DS
型号： DF1B-10DP-2.5DS
厂家： HRS    HRS
描述：

Board Connector, 10 Contact(s), 2 Row(s), Male, Right Angle, 0.098 inch Pitch, Solder Terminal, White Insulator, Receptacle
文件： 总17页 (文件大小：572K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.  
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.  
2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)  
DF1B Series  
■Features  
1. New Insulation Displacement and Crimping Ideas  
Cables with different current capacities  
can be mixed in one case  
This connector is a new type to insert the ID contacts in the case. Using this  
method, the following merits can be gained.  
ID terminal (AWG24, 26, 28)  
Crimping contact (AWG20 to 30)  
1 By using the ID contact and crimping contact together, different current  
capacity cables can be mixed in one case.  
2 After connection, the contact can be replaced in excellent maintainability.  
3 Because the insulation displacement area is protected by the case, high  
reliability can be assured.  
4 Since the insulation displacement process can be performed only by  
replacing the applicator of the existing crimping machine, no expensive  
machine for insulation displacement is required.  
Figure 1  
Potting status  
2. Potting Header Available  
The high profile header is also available, corresponding to the board potting  
process (sealed with resin) as waterproof measures.  
3. Broad Variations  
The single row and double row contacts are aligned for "Board to Cable" and  
"In-line" series, respectively, while standard tin and gold plating products are  
available.  
(Refer to the applicable combination pattern on next page.)  
Figure 2  
■Applications  
Business equipment, particularly including the copy machine and printer  
B153  
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.  
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.  
BApplicable Combination  
K
Single Row Type  
Straight Through hole Type  
Socket (Cable Side)  
Pin header  
DF1B-*S-2.5R  
DF1B-*P-2.5DSA  
Right angle Through hole Type  
Pin header  
DF1B-*P-2.5DS  
Panel Mount Type  
In-line plug (Cable side)  
DF1BA-*EP-2.5RC  
K
Double Row Type  
Straight Through hole Type  
Socket (Cable Side)  
Pin header  
DF1B-*DS-2.5RC  
DF1B-*DP-2.5DSA  
Right angle Through hole Type  
Pin header  
DF1B-*DP-2.5DS  
Panel Mount Type  
In-line plug (Cable side)  
DF1BA-*DEP-2.5RC  
In-line Connection Product (Cable to Cable Connection) : Full Lock Type  
K
Single Row Type  
Socket (Cable Side)  
In-line plug (Cable side)  
DF1B-*ES-2.5RC  
DF1B-*EP-2.5RC  
K
Double Row Type  
Socket (Cable Side)  
In-line plug (Cable side)  
DF1B-*DES-2.5RC  
DF1B-*DEP-2.5RC  
B154  
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.  
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.  
■Product Specifications  
AWG 20 to 24: 3A  
)
-35 to +85ç (  
-40 to 80%  
Note2  
Operating Temperature Range  
Operating Moisture Range  
AWG 26  
AWG 28  
AWG 30  
250V AC  
: 2A  
Current rating  
(Note1)  
Rating  
Cable Size  
: 1A  
)
-10 to +60ç (  
Note3  
Storage Temperature Range  
Storage Moisture Range  
: 0.5A  
-40 to 70% (  
)
Note3  
Voltage rating  
■UL CSA Safety File No.  
UL : E52653  
CSA : LR95109  
UL-CSA Safety Standard Standardized Value  
AWG 20 to 22: 3A  
AWG 24 to 28: 1A  
Current rating  
(Note1)  
Cable Size  
Rating  
AWG 30  
30V AC  
: 0.5A  
Voltage rating  
Item  
1. Insulation Resistance 1000M ohms Min  
2. Withstanding voltage No flashover or insulation breakdown.  
3. Contact Resistance 30m ohms Max  
4. Insertor/Extraction Force MIN0.44N (45gf), MAX4.4N(450gf)  
5. Vibration No electrical discontinuity of 1µs or more  
Specification  
Condition  
500V DC  
650V AC/1 minute  
100mA  
Measure at the square steel pin of 0.635 0.002mm  
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.  
6. Humidity (Steady state) Contact resistance: 30m ohms max.Insulation resistance: 1000M ohms min. 96 hours at temperature of 40ç and humidity of 90% to 95%  
(-55ç: 30 minutes ■■15 to 35ç: 2 to 3 minutes  
7. Temperature Cycle  
Contact resistance: 30m ohms max:Insulation resistance: 1000M ohms min.  
(-85ç: 30 minutes ■■15 to 35ç: 2 to 3 minutes) 5 cycles  
Tin plating : 30 cycles  
8. Operating Life  
Contact resistance: 30m ohms max.  
Gold plating : 50 cycles  
Flow: 250ç for 10 seconds  
9. Resistance to Soldering heat No deformation of components affecting performance.  
Manual soldering: 300ç for 3 seconds  
Note 1: Includes temperature rise caused by current flow.  
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and  
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.  
■Material  
Product  
Socket  
Part  
Material  
Polyamide  
Finish  
Remarks  
UL94V-0  
––––––  
––––––  
UL94V-0  
––––––  
UL94V-0  
––––––  
––––––  
Insulator  
Contact  
Contact  
Insulator  
Contact  
Insulator  
Contact  
Contact  
White  
ID Contact for Socket  
Crimping Contact for Socket  
Phosphor copper  
Phosphor copper  
Polyamide  
Tin plated or gold plated  
Tin plated or gold plated  
White  
Pin Header  
Brass  
Tin plated or gold plated  
White  
In-line Plug  
Polyamide  
ID Contact for In-line Plug  
Crimping Contact for In-line Plug  
Phosphor copper  
Phosphor copper  
Tin plated or gold plated  
Tin plated or gold plated  
Note: The whisker method is implemented for tin plating.  
B155  
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.  
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.  
■Ordering Information  
KConnector  
DF1B  
q
- * S 2.5 RC  
w
e
r
t
q Series Name  
: DF 1B  
e Connector Type  
r Contact Pitch: 2.5mm  
t Contact Type  
RC : ID/crimping socket (Note)  
w Number of Contacts  
S
: Single row socket  
: Double row socket  
Single Row : 2 to 16, 18, 20  
DS  
P
: Single row pin header  
: Double row pin header  
: Single row in-line socket  
DSA : Straight through hole  
DS : Right angle through hole  
Double Row : 4 to 30, 34, 40  
DP  
ES  
Note: The single row socket DF1B-*S-2.5R  
only adds "R" to the tail, which has  
the same meaning as "RC".  
DES : Double row in-line socket  
EP : Single row in-line plug  
DEP : Double row in-line plug  
KSocket ID Contact  
DF1B  
-
R 24 F A  
q
w
e
r
q 1. Connection Type  
: ID  
e Packaging Type  
R
Blank : Bag  
w
Applicable Cable Size  
24 : AWG24  
F
: Reel  
r Plating Type  
26 : AWG26  
Blank : Tin plated  
28 : AWG28  
A
: Gold plated  
KPlug ID Contact  
DF1B  
-
24 P R F B  
q
w
e
r
t
q Applicable Cable Size  
24 : AWG24  
r Packaging Type  
Blank : Bag  
26 : AWG26  
F
: Reel  
28 : AWG28  
t Plating Type  
w
Connector Type  
: Plug  
e Connection Type  
: ID  
Blank : Tin plated  
P
A
: Gold plated  
R
KCrimping Contact  
DF1B  
-
2428 SCF A  
q
w
e
q Applicable Cable Size  
2022 : AWG20 to 22  
2428 : AWG24 to 28  
e Plating Type  
Blank : Tin plating  
A
B
: Gold plated  
28  
: AWG30  
: Gold plated (Note)  
w
Packaging Type  
Note: In case of the socket contact,  
"A" is attached to the tail of  
the product name. In case of  
the plug contact, "B" is  
attached thereto.  
SCF : Socket Contact/Reel  
SC : Socket Contact/Bag  
PCF : Plug Contact/Reel  
PC : Plug Contact/Bag  
B156  
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.  
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.  
■Single Row Socket  
[Specific No.] –* *, (* *)  
Blank :100 pcs. per bag  
Photo: Contact Inserted  
Unit: mm  
Part Number  
CL No.  
Number of Contacts  
A
B
Part Number  
CL No.  
Number of Contacts  
A
B
2
3
5
2.5  
5
11  
12  
13  
14  
15  
16  
18  
20  
27.5 25  
DF1B- 2S-2.5R(**) 541-0200-6-**  
DF1B- 3S-2.5R(**) 541-0201-9-**  
DF1B- 4S-2.5R(**) 541-0202-1-**  
DF1B- 5S-2.5R(**) 541-0203-4-**  
DF1B- 6S-2.5R(**) 541-0204-7-**  
DF1B- 7S-2.5R(**) 541-0205-0-**  
DF1B- 8S-2.5R(**) 541-0206-2-**  
DF1B- 9S-2.5R(**) 541-0207-5-**  
DF1B-10S-2.5R(**) 541-0208-8-**  
DF1B-11S-2.5R(**) 541-0209-0-**  
DF1B-12S-2.5R(**) 541-0210-0-**  
DF1B-13S-2.5R(**) 541-0211-2-**  
DF1B-14S-2.5R(**) 541-0212-5-**  
DF1B-15S-2.5R(**) 541-0213-8-**  
DF1B-16S-2.5R(**) 541-0214-0-**  
DF1B-18S-2.5R(**) 541-0215-3-**  
DF1B-20S-2.5R(**) 541-0216-6-**  
7.5  
30  
27.5  
4
10  
7.5  
32.5 30  
5
12.5 10  
35  
32.5  
6
15  
12.5  
37.5 35  
7
17.5 15  
40  
45  
50  
37.5  
8
20  
17.5  
42.5  
47.5  
9
22.5 20  
10  
25  
22.5  
Note1: The quantity at the specific No."None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.  
Note2: The 2 contact connector contains the convex portion to prevent mis-insertion in the center at one point, which is different from  
the above figure. The 3 to 7 contacts connectors have the area at both ends.  
■Double Row Socket  
[Specific No.] –* *, (* *)  
Blank :100 pcs. per bag  
Photo: Contact Inserted.  
Unit: mm  
Part Number  
CL No.  
Number of Contacts  
A
B
Part Number  
CL No.  
Number of Contacts  
A
B
4
7.5  
2.5  
5
22  
24  
26  
28  
30  
34  
36  
40  
30  
32.5 27.5  
35 30  
37.5 32.5  
25  
DF1B- 4DS-2.5RC(**) 541-0648-0-**  
DF1B- 6DS-2.5RC(**) 541-0649-3-**  
DF1B- 8DS-2.5RC(**) 541-0650-2-**  
DF1B-10DS-2.5RC(**) 541-0600-4-**  
DF1B-12DS-2.5RC(**) 541-0601-7-**  
DF1B-14DS-2.5RC(**) 541-0602-0-**  
DF1B-16DS-2.5RC(**) 541-0603-2-**  
DF1B-18DS-2.5RC(**) 541-0604-5-**  
DF1B-20DS-2.5RC(**) 541-0605-8-**  
DF1B-22DS-2.5RC(**) 541-0606-0-**  
DF1B-24DS-2.5RC(**) 541-0607-3-**  
DF1B-26DS-2.5RC(**) 541-0608-6-**  
DF1B-28DS-2.5RC(**) 541-0609-9-**  
DF1B-30DS-2.5RC(**) 541-0610-8-**  
DF1B-34DS-2.5RC(**) 541-0612-3-**  
DF1B-36DS-2.5RC(**) 541-0613-6-**  
DF1B-40DS-2.5RC(**) 541-0615-1-**  
6
10  
8
12.5  
15  
7.5  
10  
12  
14  
16  
18  
20  
10  
17.5 12.5  
20 15  
22.5 17.5  
25 20  
27.5 22.5  
40  
45  
35  
40  
47.5 42.5  
52.5 47.5  
Note1: The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.) If needed, please order the product per bag.  
Note2: The 4 contact connector contains the convex portion to prevent miss-insertion in the center at one point, which is different from  
the above figure.  
B157  
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.  
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.  
■ Single Row Straight Pin Header  
[Specific No.] –* *, (* *)  
Blank: Tin plated  
(01) : Gold plated  
KBoard Through-hole Diameter:Ø1.1++00.1  
Unit: mm  
Part Number  
CL No.  
Number of Contacts  
A
B
Part Number  
CL No.  
Number of Contacts  
A
B
2
3
2.5  
5
7.5  
11  
12  
13  
14  
15  
16  
18  
20  
25  
27.5 32.5  
30 35  
32.5 37.5  
35 40  
30  
DF1B- 2P-2.5DSA(**  
DF1B- 3P-2.5DSA(**  
DF1B- 4P-2.5DSA(**  
DF1B- 5P-2.5DSA(**  
DF1B- 6P-2.5DSA(**  
DF1B- 7P-2.5DSA(**  
DF1B- 8P-2.5DSA(**  
DF1B- 9P-2.5DSA(**  
DF1B-10P-2.5DSA(**  
)
)
)
)
)
)
)
)
)
541-0225-7-**  
541-0226-0-**  
541-0227-2-**  
541-0228-5-**  
541-0229-8-**  
541-0230-7-**  
541-0231-0-**  
541-0232-2-**  
541-0233-5-**  
DF1B-11P-2.5DSA(**  
DF1B-12P-2.5DSA(**  
DF1B-13P-2.5DSA(**  
DF1B-14P-2.5DSA(**  
DF1B-15P-2.5DSA(**  
DF1B-16P-2.5DSA(**  
DF1B-18P-2.5DSA(**  
DF1B-20P-2.5DSA(**  
)
)
)
)
)
)
)
)
541-0234-8-**  
541-0235-0-**  
541-0236-3-**  
541-0237-6-**  
541-0238-9-**  
541-0239-1-**  
541-0240-0-**  
541-0241-3-**  
10  
4
7.5 12.5  
5
10  
15  
6
12.5 17.5  
7
15  
17.5 22.5  
20 25  
22.5 27.5  
20  
37.5 42.5  
42.5 47.5  
47.5 52.5  
8
9
10  
Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.) If needed, please order the product per bag.  
Note 2.The 2 and 3 contact connector contains the concave portion to prevent miss-insertion in the center at one point, which is  
different from the above figure.In addition, the 4 to 7 contact connectors have two concave portions at both ends.  
■ Single Row Right Angle Pin Header  
[Specific No.] –* *, (* *)  
Blank: Tin plated  
(01) : Gold plated  
K Board Through-hole Diameter:Ø1.1++00.1  
Unit: mm  
Part Number  
CL No.  
Number of Contacts  
A
B
Part Number  
CL No.  
Number of Contacts  
A
B
2
3
2.5  
5
7.5  
11  
12  
13  
14  
15  
16  
18  
20  
25  
27.5 32.5  
30 35  
32.5 37.5  
35 40  
30  
DF1B- 2P-2.5DS(**  
DF1B- 3P-2.5DS(**  
DF1B- 4P-2.5DS(**  
DF1B- 5P-2.5DS(**  
DF1B- 6P-2.5DS(**  
DF1B- 7P-2.5DS(**  
DF1B- 8P-2.5DS(**  
DF1B- 9P-2.5DS(**  
DF1B-10P-2.5DS(**  
)
)
)
)
)
)
)
)
)
541-0242-6-**  
541-0243-9-**  
541-0244-1-**  
541-0245-4-**  
541-0246-7-**  
541-0247-0-**  
541-0248-2-**  
541-0249-5-**  
541-0250-4-**  
DF1B-11P-2.5DS(**  
DF1B-12P-2.5DS(**  
DF1B-13P-2.5DS(**  
DF1B-14P-2.5DS(**  
DF1B-15P-2.5DS(**  
DF1B-16P-2.5DS(**  
DF1B-18P-2.5DS(**  
DF1B-20P-2.5DS(**  
)
)
)
)
)
)
)
)
541-0251-7-**  
541-0252-0-**  
541-0253-2-**  
541-0254-5-**  
541-0255-8-**  
541-0256-0-**  
541-0257-3-**  
541-0258-6-**  
10  
4
7.5 12.5  
5
10  
15  
6
12.5 17.5  
7
15  
17.5 22.5  
20 25  
22.5 27.5  
20  
37.5 42.5  
42.5 47.5  
47.5 52.5  
8
9
10  
Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.  
Note 2.The 4 and 6 contact connector contains the concave portion to prevent miss-insertion in the center at one point, which is  
different from the above figure.  
B158  
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.  
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.  
■ Single Row Straight Pin Header for Potting  
B Tube Size  
Unit: mm  
K Board Positioning Boss Hole Diameter:Ø1.1++00.1  
Part Number  
CL No.  
Number of Contacts  
A
B
Tube Package Quantity  
K Board Through-hole Diameter:Ø1.1++00.1  
2
3
2.5  
5
7.5  
64pieces  
48  
DF1BD- 2P-2.5DSA(**  
DF1BD- 3P-2.5DSA(**  
DF1BD- 4P-2.5DSA(**  
DF1BD- 5P-2.5DSA(**  
DF1BD- 6P-2.5DSA(**  
DF1BD- 7P-2.5DSA(**  
DF1BD- 8P-2.5DSA(**  
DF1BD- 9P-2.5DSA(**  
DF1BD-10P-2.5DSA(**  
)
)
)
)
)
)
)
)
)
541-0800-3-**  
541-0801-6-**  
541-0802-9-**  
541-0803-1-**  
541-0804-4-**  
541-0805-7-**  
541-0806-0-**  
541-0807-2-**  
541-0808-5-**  
10  
4
7.5 12.5  
38  
[Specific No.] –* *, (* *)  
Blank: Tin plated  
(20) : Tin plated, tube packaging  
5
10  
15  
32  
6
12.5 17.5  
27  
7
15  
17.5 22.5  
20 25  
22.5 27.5  
20  
24  
8
21  
9
19  
10  
17  
Note 1.A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the product per pack.  
Note 2.Please order the tube packaging products, multiplying the packaging quantity (pieces).  
Note 3.The 2 and 3 contact connector contains the concave portion to prevent miss-insertion in the center at one point, which is  
different from the above figure.In addition, the 4 to 7 contacts connectors have two concave portions at both ends.  
BApplicable Potting Thickness : 6mm  
Potting status  
B159  
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.  
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.  
■ Double Row Straight Pin Header  
[Specific No.] –* *, (* *)  
Blank: Tin plated  
(01) : Gold plated  
■Board Through-hole Diameter:Ø1.1++00.1  
Unit: mm  
Part Number  
CL No.  
Number of Contacts  
A
B
Part Number  
CL No.  
Number of Contacts  
A
B
4
7.5  
2.5  
5
20  
22  
24  
26  
28  
30  
34  
40  
27.5 22.5  
30 25  
32.5 27.5  
35 30  
37.5 32.5  
DF1B- 4DP-2.5DSA(**) 541-0651-5-**  
DF1B- 6DP-2.5DSA(**) 541-0652-8-**  
DF1B- 8DP-2.5DSA(**) 541-0653-0-**  
DF1B-10DP-2.5DSA(**) 541-0616-4-**  
DF1B-12DP-2.5DSA(**) 541-0617-7-**  
DF1B-14DP-2.5DSA(**) 541-0618-0-**  
DF1B-16DP-2.5DSA(**) 541-0619-2-**  
DF1B-18DP-2.5DSA(**) 541-0620-1-**  
DF1B-20DP-2.5DSA(**) 541-0621-4-**  
DF1B-22DP-2.5DSA(**) 541-0622-7-**  
DF1B-24DP-2.5DSA(**) 541-0623-0-**  
DF1B-26DP-2.5DSA(**) 541-0624-2-**  
DF1B-28DP-2.5DSA(**) 541-0625-5-**  
DF1B-30DP-2.5DSA(**) 541-0626-8-**  
DF1B-34DP-2.5DSA(**) 541-0628-3-**  
DF1B-40DP-2.5DSA(**) 541-0631-8-**  
6
10  
8
12.5  
15  
7.5  
10  
12  
14  
16  
18  
10  
17.5 12.5  
20 15  
22.5 17.5  
25 20  
40  
45  
35  
40  
52.5 47.5  
Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.  
Note 2.The 4 and 6 contact connector contains the concave portion to prevent miss-insertion in the center area at one point, which is  
different from the above figure.  
■Double Row Right Angle Pin Header  
[Specific No.] –* *, (* *)  
Blank: Tin plated  
(01) : Gold plated  
K Board Through-hole Diameter:Ø1.1++00.1  
Unit: mm  
Part Number  
CL No.  
Number of Contacts  
A
B
Part Number  
CL No.  
Number of Contacts  
A
B
4
7.5  
2.5  
5
22  
24  
26  
28  
30  
34  
36  
40  
30  
32.5 27.5  
35 30  
37.5 32.5  
25  
DF1B- 4DP-2.5DS(**  
DF1B- 6DP-2.5DS(**  
DF1B- 8DP-2.5DS(**  
DF1B-10DP-2.5DS(**  
DF1B-12DP-2.5DS(**  
DF1B-14DP-2.5DS(**  
DF1B-16DP-2.5DS(**  
DF1B-18DP-2.5DS(**  
DF1B-20DP-2.5DS(**  
)
)
)
)
)
)
)
)
)
541-0654-3-**  
541-0655-6-**  
541-0656-9-**  
541-0632-0-**  
541-0633-3-**  
541-0634-6-**  
541-0635-9-**  
541-0636-1-**  
541-0637-4-**  
DF1B-22DP-2.5DS(**  
DF1B-24DP-2.5DS(**  
DF1B-26DP-2.5DS(**  
DF1B-28DP-2.5DS(**  
DF1B-30DP-2.5DS(**  
DF1B-34DP-2.5DS(**  
DF1B-36DP-2.5DS(**  
DF1B-40DP-2.5DS(**  
)
)
)
)
)
)
)
)
541-0638-7-**  
541-0639-0-**  
541-0640-9-**  
541-0641-1-**  
541-0642-4-**  
541-0644-0-**  
541-0645-2-**  
541-0647-8-**  
6
10  
8
12.5  
15  
7.5  
10  
12  
14  
16  
18  
20  
10  
17.5 12.5  
20 15  
22.5 17.5  
25 20  
27.5 22.5  
40  
45  
35  
40  
47.5 42.5  
52.5 47.5  
Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.  
Note 2.The 4 and 6 contact connector contains the concave portion to prevent miss-insertion in the center area at one point, which is  
different from the above figure.  
B160  
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.  
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.  
■■Single Row In-line Plug(Simple Lock Type)  
KApplicable Socket: DF1B-*S-2.5R  
[Specific No.] –* *, (* *)  
Blank: Tin plated  
(01) : Gold plated  
Contact Inserted.  
Unit: mm  
Part Number  
CL No.  
Number of Contacts  
A
B
Part Number  
CL No.  
Number of Contacts  
A
B
2
3
4
5
6
7
2.5  
5
7.1  
9.6  
8
17.5 22.1  
20 24.6  
22.5 27.1  
25 29.6  
27.5 32.1  
30 34.6  
DF1BA- 2EP-2.5RC(**) 541-0700-9-**  
DF1BA- 3EP-2.5RC(**) 541-0701-1-**  
DF1BA- 4EP-2.5RC(**) 541-0702-4-**  
DF1BA- 5EP-2.5RC(**) 541-0703-7-**  
DF1BA- 6EP-2.5RC(**) 541-0704-0-**  
DF1BA- 7EP-2.5RC(**) 541-0705-2-**  
DF1BA- 8EP-2.5RC** 541-0706-5-**  
DF1BA- 9EP-2.5RC** 541-0707-8-**  
DF1BA-10EP-2.5RC** 541-0708-0-**  
DF1BA-11EP-2.5RC** 541-0709-3-**  
DF1BA-12EP-2.5RC** 541-0710-2-**  
DF1BA-13EP-2.5RC** 541-0711-5-**  
9
7.5 12.1  
10  
11  
12  
13  
10  
14.6  
12.5 17.1  
15  
19.6  
Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.  
Note 2.The 2 contacts connector contains the concave portion to prevent miss-insertion in the center area at one point, which is  
different from the above figure.In addition, the 3 to 7 contact connectors contain the concave portion at both sides.  
B Panel Cutouts  
Unit: mm  
C
Panel Board Thickness (Note 1)  
Applicable Plug  
Number of Contacts  
D
0.5 to 1.2  
1.3 to 1.6  
11.9  
14.4  
16.9  
19.4  
21.9  
24.4  
26.9  
29.4  
31.9  
34.4  
36.9  
39.4  
1.7 to 2.0  
2
3
11.2  
13.7  
16.2  
18.7  
21.2  
23.7  
26.2  
28.7  
31.2  
33.7  
36.2  
38.7  
12.6  
15.1  
17.6  
20.1  
22.6  
25.1  
27.6  
30.1  
32.6  
35.1  
37.6  
40.1  
7.3  
DF1BA- 2EP-2.5RC(**  
DF1BA- 3EP-2.5RC(**  
DF1BA- 4EP-2.5RC(**  
DF1BA- 5EP-2.5RC(**  
DF1BA- 6EP-2.5RC(**  
DF1BA- 7EP-2.5RC(**  
DF1BA- 8EP-2.5RC(**  
DF1BA- 9EP-2.5RC(**  
DF1BA-10EP-2.5RC(**  
DF1BA-11EP-2.5RC(**  
DF1BA-12EP-2.5RC(**  
DF1BA-13EP-2.5RC(**  
)
)
)
)
)
)
)
)
)
)
)
)
9.8  
4
12.3  
14.8  
17.3  
19.8  
22.3  
24.8  
27.3  
29.8  
32.3  
34.8  
5
6
7
8
9
10  
11  
12  
13  
Note 1.The installation hole size C according to panel board thickness.  
Note 2.Fabricate installation holes so that no burr can occur.  
B161  
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.  
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.  
■ Double Row In-line Plug (Simple Lock Type)  
KApplicable Socket: DF1B-*DS-2.5RC  
[Specific No.] –* *, (* *)  
Blank: 100 pcs. per pack  
Contact Inserted.  
Unit: mm  
Part Number  
CL No.  
Number of Contacts  
A
B
Part Number  
CL No.  
Number of Contacts  
A
B
4
2.5  
5
8.6  
20  
22  
24  
26  
28  
30  
34  
22.5 28.6  
25 31.1  
27.5 33.6  
30 36.1  
32.5 38.6  
DF1BA- 4DEP-2.5RC(**) 541-0719-7-**  
DF1BA- 6DEP-2.5RC(**) 541-0720-6-**  
DF1BA- 8DEP-2.5RC(**) 541-0721-9-**  
DF1BA-10DEP-2.5RC(**) 541-0722-1-**  
DF1BA-12DEP-2.5RC(**) 541-0723-4-**  
DF1BA-14DEP-2.5RC(**) 541-0724-7-**  
DF1BA-16DEP-2.5RC(**) 541-0725-0-**  
DF1BA-18DEP-2.5RC(**) 541-0726-2-**  
DF1BA-20DEP-2.5RC(**) 541-0727-5-**  
DF1BA-22DEP-2.5RC(**) 541-0728-8-**  
DF1BA-24DEP-2.5RC(**) 541-0729-0-**  
DF1BA-26DEP-2.5RC(**) 541-0730-0-**  
DF1BA-28DEP-2.5RC(**) 541-0731-2-**  
DF1BA-30DEP-2.5RC(**) 541-0732-5-**  
DF1BA-34DEP-2.5RC(**) 541-0734-0-**  
6
11.1  
8
7.5 13.6  
10  
12  
14  
16  
18  
10  
16.1  
12.5 18.6  
15  
17.5 23.6  
20 26.1  
21.1  
35  
40  
41.1  
46.1  
Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.  
Note 2.The 4 contacts connector contains the concave portion to prevent miss-insertion in the center at one point, which is different  
from the above figure.  
B Panel Cutouts  
Panel  
Unit: mm  
C
Applicable Plug  
Number of Contacts  
Panel Board Thickness (Note 1)  
0.5 to 1.2 1.7 to 2.0  
D
1.3 to 1.6  
13.4  
15.9  
18.4  
20.9  
23.4  
25.9  
28.4  
30.9  
33.4  
35.9  
38.4  
40.9  
43.4  
45.9  
50.9  
DF1BA- 4DEP-2.5RC  
DF1BA- 6DEP-2.5RC  
DF1BA- 8DEP-2.5RC  
DF1BA-10DEP-2.5RC  
DF1BA-12DEP-2.5RC  
DF1BA-14DEP-2.5RC  
DF1BA-16DEP-2.5RC  
DF1BA-18DEP-2.5RC  
DF1BA-20DEP-2.5RC  
DF1BA-22DEP-2.5RC  
DF1BA-24DEP-2.5RC  
DF1BA-26DEP-2.5RC  
DF1BA-28DEP-2.5RC  
DF1BA-30DEP-2.5RC  
DF1BA-34DEP-2.5RC  
4
12.7  
15.2  
17.7  
20.2  
22.7  
25.2  
27.7  
30.2  
32.7  
35.2  
37.7  
40.2  
42.7  
45.2  
50.2  
14.1  
16.6  
19.1  
21.6  
24.1  
26.6  
29.1  
31.6  
34.1  
36.6  
39.1  
41.6  
44.1  
46.6  
51.6  
8.8  
6
11.3  
13.8  
16.3  
18.8  
21.3  
23.8  
26.3  
28.8  
31.3  
33.8  
36.3  
38.8  
41.3  
46.3  
8
10  
12  
14  
16  
18  
20  
22  
24  
26  
28  
30  
34  
Note 1.The installation hole size C according to panel board thickness.  
Note 2.Fabricate installation holes so that no burr can occur.  
B162  
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.  
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.  
■ Single Row In-line Socket (Full Lock Type)  
KApplicable Socket: DF1B-*DEP-2.5RC  
[Specific No.] –* *, (* *)  
Blank: 100 pcs. per pack  
Contact Inserted.  
Unit: mm  
Part Number  
DF1B- 2ES-2.5RC  
DF1B- 3ES-2.5RC  
DF1B- 4ES-2.5RC  
DF1B- 5ES-2.5RC  
DF1B- 6ES-2.5RC  
DF1B- 7ES-2.5RC  
CL No.  
Number of Contacts  
A
B
Part Number  
DF1B- 8ES-2.5RC  
DF1B- 9ES-2.5RC  
DF1B-10ES-2.5RC  
DF1B-11ES-2.5RC  
DF1B-12ES-2.5RC  
DF1B-13ES-2.5RC  
CL No.  
Number of Contacts  
A
B
541-0320-8-  
541-0321-0-  
541-0322-3-  
541-0323-6-  
541-0324-9-  
541-0325-1-  
2
3
4
5
6
7
2.5  
5
6.5  
9
541-0326-4-  
541-0327-7-  
541-0328-0-  
541-0329-2-  
541-0330-1-  
541-0331-4-  
8
17.5 21.5  
20 24  
22.5 26.5  
25 29  
27.5 31.5  
30 34  
9
7.5 11.5  
10  
11  
12  
13  
10  
14  
12.5 16.5  
15  
19  
Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.  
B Panel Cutouts  
Panel  
Unit: mm  
E
Panel Board Thickness (Note 1)  
Applicable Plug  
Number of Contacts  
C
D
0.5 to 1.2  
1.3 to 1.6  
11.3  
13.8  
16.3  
18.8  
21.3  
23.8  
26.3  
28.8  
31.3  
33.8  
36.3  
38.8  
1.7 to 2.0  
DF1B- 2ES-2.5RC  
DF1B- 3ES-2.5RC  
DF1B- 4ES-2.5RC  
DF1B- 5ES-2.5RC  
DF1B- 6ES-2.5RC  
DF1B- 7ES-2.5RC  
DF1B- 8ES-2.5RC  
DF1B- 9ES-2.5RC  
DF1B-10ES-2.5RC  
DF1B-11ES-2.5RC  
DF1B-12ES-2.5RC  
DF1B-13ES-2.5RC  
2
3
4.7  
7.2  
6.7  
10.8  
13.3  
15.8  
18.3  
20.8  
23.3  
25.8  
28.3  
30.8  
33.3  
35.8  
38.3  
12  
14.5  
17  
9.2  
4
9.7  
11.7  
14.2  
16.7  
19.2  
21.7  
24.2  
26.7  
29.2  
31.7  
34.2  
5
12.2  
14.7  
17.2  
19.7  
22.2  
24.7  
27.2  
29.7  
32.2  
19.5  
22  
6
7
24.5  
27  
8
9
29.5  
32  
10  
11  
12  
13  
34.5  
37  
39.5  
Note 1.The installation hole size C will be changed according to panel board thickness.  
Note 2.Fabricate installation holes so that no burr can occur.  
B163  
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.  
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.  
■ Double Row In-line Socket (Full Lock Type)  
KApplicable Socket: DF1B-*EP-2.5RC  
[Specific No.] –* *, (* *)  
Blank: 100 pcs. per pack  
Contact Inserted.  
Unit: mm  
Part Number  
CL No.  
Number of Contacts  
A
B
Part Number  
CL No.  
Number of Contacts  
A
B
10  
12  
14  
16  
18  
20  
22  
10  
12.5 17.5  
15 20  
17.5 22.5  
20 25  
22.5 27.5  
25 30  
15  
24  
26  
28  
30  
32  
34  
27.5 32.5  
30 35  
32.5 37.5  
35 40  
37.5 42.5  
40 45  
DF1B-10DES-2.5RC(**) 541-0351-1-**  
DF1B-12DES-2.5RC(**) 541-0352-4-**  
DF1B-14DES-2.5RC(**) 541-0353-7-**  
DF1B-16DES-2.5RC(**) 541-0354-0-**  
DF1B-18DES-2.5RC(**) 541-0346-1-**  
DF1B-20DES-2.5RC(**) 541-0355-2-**  
DF1B-22DES-2.5RC(**) 541-0356-5-**  
DF1B-24DES-2.5RC(**) 541-0357-8-**  
DF1B-26DES-2.5RC(**) 541-0358-0-**  
DF1B-28DES-2.5RC(**) 541-0359-3-**  
DF1B-30DES-2.5RC(**) 541-0360-2-**  
DF1B-32DES-2.5RC(**) 541-0361-5-**  
DF1B-34DES-2.5RC(**) 541-0362-8-**  
Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.  
B Panel Cutouts  
Panel  
Unit: mm  
C
Panel Board Thickness (Note 1)  
Applicable Plug  
Number of Contacts  
D
E
0.5 to 1.2  
1.3 to 1.6  
19.8  
22.3  
24.8  
27.3  
29.8  
32.3  
34.8  
37.3  
39.8  
42.3  
44.8  
47.3  
49.8  
1.7 to 2.0  
10  
12  
14  
16  
18  
20  
22  
24  
26  
28  
30  
32  
34  
19.1  
21.6  
24.1  
26.6  
29.1  
31.6  
34.1  
36.6  
39.1  
41.6  
44.1  
46.6  
49.1  
20.5  
23  
15.2  
17.7  
20.2  
22.7  
25.2  
27.7  
30.2  
32.7  
35.2  
37.7  
40.2  
42.7  
45.2  
3.7  
3.7  
3.7  
3.7  
3.7  
5.2  
5.2  
5.2  
5.2  
5.2  
5.2  
5.2  
5.2  
DF1B-10DES-2.5RC(**)  
DF1B-12DES-2.5RC(**)  
DF1B-14DES-2.5RC(**)  
DF1B-16DES-2.5RC(**)  
DF1B-18DES-2.5RC(**)  
DF1B-20DES-2.5RC(**)  
DF1B-22DES-2.5RC(**)  
DF1B-24DES-2.5RC(**)  
DF1B-26DES-2.5RC(**)  
DF1B-28DES-2.5RC(**)  
DF1B-30DES-2.5RC(**)  
DF1B-32DES-2.5RC(**)  
DF1B-34DES-2.5RC(**)  
25.5  
28  
30.5  
33  
35.5  
38  
40.5  
43  
45.5  
48  
50.5  
Note 1.The installation hole size C according to panel board thickness.  
Note 2.Fabricate installation holes so that no burr can occur.  
B164  
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.  
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.  
■ Single Row In-line Plug (Full Lock Type)  
Socket: DF1B-*ES-2.5RC  
No.] –* *, (* *)  
0 pcs. per pack  
Contact Inserted.  
Unit: mm  
Part Number  
CL No.  
Number of Contacts  
A
B
Part Number  
CL No.  
Number of Contacts  
A
B
2
3
4
5
6
7
8.9  
2.5  
5
8
23.9 17.5  
26.4 20  
28.9 22.5  
31.4 25  
33.9 27.5  
36.4 30  
DF1B- 2EP-2.5RC(**) 541-0332-7-**  
DF1B- 3EP-2.5RC(**) 541-0333-0-**  
DF1B- 4EP-2.5RC(**) 541-0334-2-**  
DF1B- 5EP-2.5RC(**) 541-0335-5-**  
DF1B- 6EP-2.5RC(**) 541-0336-8-**  
DF1B- 7EP-2.5RC(**) 541-0337-0-**  
DF1B- 8EP-2.5RC(**) 541-0338-3-**  
DF1B- 9EP-2.5RC(**) 541-0339-6-**  
DF1B-10EP-2.5RC(**) 541-0340-5-**  
DF1B-11EP-2.5RC(**) 541-0341-8-**  
DF1B-12EP-2.5RC(**) 541-0342-0-**  
DF1B-13EP-2.5RC(**) 541-0343-3-**  
11.4  
13.9  
9
7.5  
10  
11  
12  
13  
16.4 10  
18.9 12.5  
21.4 15  
Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.  
■ Double Row In-line Plug (Full Lock Type)  
pplicable Socket: DF1B-*DES-2.5RC  
Specific No.] –* *, (* *)  
lank: 100 pcs. per pack  
Contact Inserted.  
Unit: mm  
Part Number  
CL No.  
Number of Contacts  
A
B
Part Number  
CL No.  
Number of Contacts  
A
B
10  
12  
14  
16  
18  
20  
22  
17.2 10  
19.7 12.5  
22.2 15  
24.7 17.5  
27.2 20  
29.7 22.5  
32.2 25  
24  
26  
28  
30  
32  
34  
34.7 27.5  
37.2 30  
39.7 32.5  
42.2 35  
44.7 37.5  
47.2 40  
DF1B-10DEP-2.5RC(**) 541-0366-9-**  
DF1B-12DEP-2.5RC(**) 541-0367-1-**  
DF1B-14DEP-2.5RC(**) 541-0368-4-**  
DF1B-16DEP-2.5RC(**) 541-0369-7-**  
DF1B-18DEP-2.5RC(**) 541-0350-9-**  
DF1B-20DEP-2.5RC(**) 541-0370-6-**  
DF1B-22DEP-2.5RC(**) 541-0371-9-**  
DF1B-24DEP-2.5RC(**) 541-0372-1-**  
DF1B-26DEP-2.5RC(**) 541-0373-4-**  
DF1B-28DEP-2.5RC(**) 541-0374-7-**  
DF1B-30DEP-2.5RC(**) 541-0375-0-**  
DF1B-32DEP-2.5RC(**) 541-0376-2-**  
DF1B-34DEP-2.5RC(**) 541-0377-5-**  
Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.  
B165  
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.  
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.  
■ ID Contact for Socket  
Unit: mm  
Applicable Cable  
Applicable  
Packaging  
Type  
Part Number  
CL No.  
Quantity  
Finish  
Cable Indication  
AWG  
UL Style  
Wire Construction Jacket Diameter  
DF1B-R24F 541-0217-9  
DF1B-R24 541-0220-3  
DF1B-R26F 541-0218-1  
DF1B-R26 541-0221-6  
DF1B-R28F 541-0219-4  
DF1B-R28 541-0222-9  
DF1B-R24FA 541-0261-0  
DF1B-R24A 541-0264-9  
DF1B-R26FA 541-0262-3  
DF1B-R26A 541-0265-1  
DF1B-R28FA 541-0263-6  
DF1B-R28A 541-0266-4  
Reel  
Bag  
Reel  
Bag  
Reel  
Bag  
Reel  
Bag  
Reel  
Bag  
Reel  
Bag  
10000  
100  
24  
26  
28  
24  
26  
28  
AWG 24  
11 cores./0.16mm  
7 cores./0.16mm  
7 cores./0.127mm  
11 cores./0.16mm  
7 cores./0.16mm  
7 cores./0.127mm  
0.9 to 1.39mm  
0.9 to 1.39mm  
0.9 to 1.39mm  
0.9 to 1.39mm  
0.9 to 1.39mm  
0.9 to 1.39mm  
1061  
1061  
1007  
1061  
1007  
10000  
100  
AWG 26  
AWG 28  
AWG 24  
AWG 26  
AWG 28  
Tin plated  
10000  
100  
10000  
100  
1061  
1061  
1007  
1061  
1007  
10000  
100  
Gold plated  
10000  
100  
K
ID Contact Extraction Tool DF-C-PO (A)  
Note 1.The applicable cable conductor is the tin plated annealing copper wire.  
Note 2.If other cables are used instead of the applicable cable, cotact Hirose sales department.  
■ Crimping Contact for Socket  
K
Applicable Cable (Tin Plated Annealing Copper Wire)  
K
K
Recommended Cable  
UL1061, UL1007  
Strip Length  
Conductor Size (Wire construction)  
AWG20 (21cores/0.18mm)  
AWG22 (17cores/0.16mm)  
AWG24 (11cores/0.16mm)  
AWG26 (7cores/0.16mm)  
AWG28 (7cores0.127mm)  
AWG30 (7cores/0.1mm)  
2.0 to 2.5mm  
Note:If other cables are used instead  
of the applicable cable, consult  
Hirose sales department.  
Unit: mm  
Applicable Cable  
Applicable  
Packaging  
Type  
Part Number  
CL No.  
Quantity  
Finish  
Cable Indication  
AWG  
AWG 20 to  
AWG 22  
Jacket Diameter  
DF1B-2022SCF 541-0223-1  
DF1B-2022SC 541-0224-4  
DF1B-2428SCF 541-0678-1  
DF1B-2428SC 541-0679-4  
20  
22  
24  
28  
Reel  
Bag  
Reel  
Bag  
Reel  
Bag  
Reel  
Bag  
Reel  
Bag  
Reel  
Bag  
10000  
100  
1.2 to 1.9mm  
0.9 to 1.5mm  
0.6 to 1.2mm  
1.2 to 1.9mm  
0.9 to 1.5mm  
0.6 to 1.2mm  
10000  
100  
AWG 24 to  
AWG 28  
Tin plated  
DF1B-30SCF  
DF1B-30SC  
541-0682-9  
541-0683-1  
10000  
100  
30  
AWG 30  
DF1B-2022SCFA 541-0662-1  
DF1B-2022SCA 541-0663-4  
DF1B-2428SCFA 541-0680-3  
DF1B-2428SCA 541-0681-6  
DF1B-30SCFA 541-0684-4  
20  
22  
24  
28  
10000  
100  
AWG 20 to  
AWG 22  
10000  
100  
AWG 24 to  
AWG 28  
Gold plated  
10000  
100  
30  
AWG 30  
DF1B-30SCA  
541-0685-7  
K Crimping Contact Extraction Tool DF-C-PO (B)  
B166  
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.  
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.  
■ ID Contact for Plug  
Unit: mm  
Applicable Cable  
Applicable  
Packaging  
Type  
Part Number  
CL No.  
Quantity  
Finish  
Cable Indication  
AWG  
UL Style  
Wire structure Jacket Diameter  
DF1B-24PRF 541-0666-2  
DF1B-24PR 541-0667-5  
DF1B-26PRF 541-0668-8  
DF1B-26PR 541-0669-0  
DF1B-28PRF 541-0670-0  
DF1B-28PR 541-0671-2  
DF1B-24PRFB 541-0672-5  
DF1B-24PRB 541-0673-8  
DF1B-26PRFB 541-0674-0  
DF1B-26PRB 541-0675-3  
DF1B-28PRFB 541-0676-6  
DF1B-28PRB 541-0677-9  
Reel  
Bag  
Reel  
Bag  
Reel  
Bag  
Reel  
Bag  
Reel  
Bag  
Reel  
Bag  
10000  
100  
24  
26  
28  
24  
26  
28  
AWG 24  
11 pcs./0.16mm  
7 pcs./0.16mm  
7 pcs./0.127mm  
11 pcs./0.16mm  
7 pcs./0.16mm  
7 pcs./0.127mm  
0.9 to 1.39mm  
0.9 to 1.39mm  
0.9 to 1.39mm  
0.9 to 1.39mm  
0.9 to 1.39mm  
0.9 to 1.39mm  
1061  
1061  
1007  
1061  
1007  
10000  
100  
AWG 26  
AWG 28  
AWG 24  
AWG 26  
AWG 28  
Tin plated  
10000  
100  
10000  
100  
1061  
1061  
1007  
1061  
1007  
10000  
100  
Gold plated  
10000  
100  
K
ID Contact Extraction Tool DF-C-PO (C)  
Note 1.The applicable cable conductor is the tin plated annealing copper wire.  
Note 2.If other cables are used instead of the applicable cable, contact Hirose sales department.  
■ Crimping Contact for Plug  
K
Applicable Cable (Tin Plated Annealing Copper Wire)  
K
K
Recommended Cable  
UL1061, UL1007  
Strip Length  
Conductor Size (Contact wire construction)  
AWG20 (21 pieces/0.18mm)  
AWG22 (17 pieces/0.16mm)  
AWG24 (11 pieces/0.16mm)  
AWG26 (7 pieces/0.16mm)  
3.0 to 3.7mm  
Note:If other cables are used instead  
of the applicable cable, consult  
Hirose sales department.  
AWG28 (7 pieces/0.127mm)  
AWG30 (7 pieces/0.1mm)  
Unit: mm  
Applicable Cable  
Packaging  
Part Number  
CL No.  
Quantity  
Treatment  
Type  
Reel  
Bag  
Reel  
Bag  
Reel  
Bag  
Reel  
Bag  
Reel  
Bag  
Reel  
Bag  
AWG  
AWG 20 to  
AWG 22  
Jacket Diameter  
DF1B-2022PCF 541-0259-9  
DF1B-2022PC 541-0260-8  
DF1B-2428PCF 541-0664-7  
DF1B-2428PC 541-0665-0  
DF1B-30PCF 541-0686-0  
10000  
100  
1.2 to 1.9mm  
0.9 to 1.5mm  
0.6 to 1.2mm  
1.2 to 1.9mm  
0.9 to 1.5mm  
0.6 to 1.2mm  
10000  
100  
AWG 24 to  
AWG 28  
Tin plated  
10000  
100  
AWG 30  
DF1B-30PC  
541-0687-2  
DF1B-2022PCFB 541-0690-7  
DF1B-2022PCB 541-0691-0  
DF1-PD2428SCFB 541-0660-6  
DF1-PD2428SCB 541-0661-9  
DF1B-30PCFB 541-0688-5  
DF1B-30PCB 541-0689-8  
10000  
100  
AWG 20 to  
AWG 22  
10000  
100  
AWG 24 to  
AWG 28  
Gold plated  
10000  
100  
AWG 30  
K Crimping Contact Extraction Tool DF-C-PO (C)  
B167  
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.  
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.  
B Applicable Tool  
[Press Main Unit and Applicator]  
[Manual Crimping Tool]  
Connection Type  
Type  
Part Number  
AP105-DF1B-R  
AP105-DF1B-PR  
DF1B-T2428HR  
DF1B-T2428PHR  
AP105-DF1B-2022S  
AP105-DF1B-2428S  
AP105-DF1B-30S  
AP105-DF1B-2022P  
AP105-DF1B-2428P  
AP105-DF1B-30P  
DF1B-TA2022SHC  
DF1B-TA2428SHC  
DF1B-TA30SHC  
DF1B-TA2022PHC  
DF1B-TA2428PHC  
DF1B-TA30PHC  
CM-105  
CL No.  
Applicable Contacts  
DF1B-R**F/FA **=24,26,28  
DF1B-**PRF/PRFB**=24,26,28  
DF1B-R**/A **=24,26,28  
DF1B-**PR/PRB **=24,26,28  
DF1B-2022SCF/SCFA  
901-4507-4  
901-4536-2  
550-0171-0  
550-0221-7  
901-4510-9  
901-4518-0  
901-4517-8  
901-4509-0  
901-4521-5  
901-4519-3  
550-0182-7  
550-0209-1  
550-0211-3  
550-0183-0  
550-0224-5  
550-0210-0  
901-0005-4  
550-0170-8  
550-0179-2  
550-0198-7  
Applicator  
ID  
Manual ID tool  
Applicator  
DF1B-2428SCF/SCFA  
DF1B-30SCF/SCFA  
DF1B-2022PCF/PCFB  
DF1B-2428PCF,DF1-PD2428SCF/SCFB  
DF1B-30PCF/PCFB  
Crimping  
DF1B-2022SC/SCA  
DF1B-2428SC/SCA  
Manual  
DF1B-30SC/SCA  
crimping tool  
DF1B-2022PC/PCB  
DF1B-2428PC,DF1-PD2428SCB  
DF1B-30PC/PCB  
Press Main Unit  
__________________________________  
DF1B-R**F  
DF-C-PO(A)  
Extraction Tool  
DF-C-PO(B)  
DF1B-****SCF  
DF-C-PO(C)  
DF1B-****PC,DF1B-**PRF  
Note: If a trouble has occurred due to tools which are not designated by Hirose, Hirose won't guarantee any product  
B168  
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.  
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.  
B Applicable Tool  
BPrecautions  
1. Recommended Soldering Condition Flow: 250ç for 3 seconds  
Manual soldering: 290ç for 2 seconds  
2. Cleaning Condition  
3. Connection Condition  
4. Cautions  
Refer to Nylon Connector Use Hand book.  
Refer to Nylon Connector Use Hand book.  
■The color phase of this product is slightly different from that of the formed product according to  
the manufacturing lot and future storage conditions, but the difference doesn't affect the  
performance.  
B169  

相关型号：

DF1B-10DP-2.5DS(01)

 2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
HRS

DF1B-10DP-2.5DSA(01)

 2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
HRS

DF1B-10DS-2.5RC

 2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
HRS

DF1B-10DS-2.5RC

 2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
MURATA

DF1B-10DS-2.5RC(29)

 Board Connector, 10 Contact(s), 2 Row(s), Female, 0.098 inch Pitch, Crimp Terminal, Locking, White Insulator
HRS

DF1B-10EP-2.5RC

 2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
HRS

DF1B-10ES-2.5RC

 2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
HRS

DF1B-10ES-2.5RC

 2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
MURATA

DF1B-10P-2.5DS

 Board Connector, 10 Contact(s), 2 Row(s), Male, Right Angle, 0.098 inch Pitch, Solder Terminal, White Insulator, Receptacle
HRS

DF1B-10P-2.5DS(01)

 2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
HRS

DF1B-10P-2.5DS01

 10 CONTACT(S), MALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, SOLDER
HRS

DF1B-10P-2.5DSA

 Board Connector, 10 Contact(s), 1 Row(s), Male, Straight, 0.098 inch Pitch, Solder Terminal, White Insulator, Receptacle
HRS
©2020 ICPDF网 联系我们和版权申明