首页 |元器件品牌

DF1BA-5EP-2.5RC(01) [HRS]

Board Connector, 5 Contact(s), 1 Row(s), Male, 0.098 inch Pitch, Locking Mech, White Insulator, Receptacle;
DF1BA-5EP-2.5RC(01)
型号： DF1BA-5EP-2.5RC(01)
厂家： HRS    HRS
描述：

Board Connector, 5 Contact(s), 1 Row(s), Male, 0.098 inch Pitch, Locking Mech, White Insulator, Receptacle

连接器
文件： 总17页 (文件大小：412K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)  
DF1B Series  
■Features  
1. New Insulation Displacement and Crimping Ideas  
Cables with different current capacities  
can be mixed in one case  
This connector is a new type to insert the ID contacts in the case. Using this  
method, the following merits can be gained.  
ID terminal (AWG24, 26, 28)  
Crimping contact (AWG20~30)  
1 By using the ID contact and crimping contact together, different current  
capacity cables can be mixed in one case.  
2 After connection, the contact can be replaced in excellent maintainability.  
3 Because the insulation displacement area is protected by the case, high  
reliability can be assured.  
4 Since the insulation displacement process can be performed only by  
replacing the applicator of the existing crimping machine, no expensive  
machine for insulation displacement is required.  
Figure 1  
Potting status  
2. Potting Header Available  
The high profile header is also available, corresponding to the board potting  
process (sealed with resin) as waterproof measures.  
3. Broad Variations  
The single row and double row contacts are aligned for "Board to Cable" and  
"In-line" series, respectively, while standard tin and gold plating products are  
available.  
(Refer to the applicable combination pattern on next page.)  
Figure 2  
■Applications  
Business equipment, particularly including the copy machine and printer  
B149  
BApplicable Combination  
K
Single Row Type  
Straight DIP Type  
Pin header  
Socket (Cable Side)  
DF1B-πS-2.5R  
DF1B-πP-2.5DSA  
Right angle DIP Type  
Pin header  
DF1B-πP-2.5DS  
Panel Mount Type  
In-line plug (Cable side)  
DF1BA-πEP-2.5RC  
K
Double Row Type  
Straight DIP Type  
Pin header  
Socket (Cable Side)  
DF1B-πDS-2.5RC  
DF1B-πDP-2.5DSA  
Right angle DIP Type  
Pin header  
DF1B-πDP-2.5DS  
Panel Mount Type  
In-line plug (Cable side)  
DF1BA-πDEP-2.5RC  
In-line Connection Product (Cable to Cable Connection) : Full Lock Type  
K
Single Row Type  
Socket (Cable Side)  
In-line plug (Cable side)  
DF1B-πES-2.5RC  
DF1B-πEP-2.5RC  
K
Double Row Type  
Socket (Cable Side)  
In-line plug (Cable side)  
DF1B-πDES-2.5RC  
DF1B-πDEP-2.5RC  
B150  
■Product Specifications  
AWG 20~24 : 3A  
)
)
-35~+85ç (  
-40~80%  
Note2  
Operating Temperature Range  
Operating Moisture Range  
AWG 26  
AWG 28  
AWG 30  
250V AC  
: 2A  
Rated Current  
Rating  
Cable Size  
: 1A  
(Note1)  
-10~+60ç (  
Note3  
Storage Temperature Range  
Storage Moisture Range  
: 0.5A  
-40~70% (  
)
Note3  
Rated Voltage  
■UL CSA Safety Standard File No.  
UL : E52653  
CSA : LR95109  
UL-CSA Safety Standard Standardized Value  
AWG 20~22 : 3A  
AWG 24~28 : 1A  
Rated Current  
(Note1)  
Cable Size  
Rating  
AWG 30  
30V AC  
: 0.5A  
Rated Voltage  
Item  
1. Insulation Resistance 1000Mø Min  
Specification  
Condition  
Measured at 500V DC  
2. Withstand voltage  
3. Contact Resistance  
Neither short or breakdown  
650V AC for 1 minute  
Measured at 100mA  
30mø Max  
4. Insertor/Extraction Force MIN0.44N (45gf), MAX4.4N(450gf)  
Measure at the square steel pin of 0.635 0.002mm  
5. Vibration  
Electrical discontinuity, 1µS max.  
10~55Hz and single amplitude 0.75mm in 3 directions for 2 hours,respectively.  
6. Moisture Resistance  
Contact resistance: 30mø max.Insulation resistance: 1000Mø min. Exposed to temperature 40 2ç and humidity 90~95% for 96 hours  
(-55ç: 30 minutes ■■15  
~
~
35ç: 2~3 minutes  
7. Temperature Cycle  
8. Operating Life  
Contact resistance: 30mø max:Insulation resistance: 1000Mø min.  
Contact resistance: 30mø max.  
(-85ç: 30 minutes ■■15  
35ç: 2~3 minutes) 5 cycles  
Tin plating  
Gold plating : 50 cycles  
Reflow : 250ç for 10 seconds  
: 30 cycles  
9. Resistance to Soldering heat No fusion on resin area to degrade performance  
Manual soldering: Soldering iron temperature: 300ç for 2 seconds  
Note1: The rated current will be changed according to cable sizes for use. For the header only, the rating is 3A.  
Note2: Temperature rise included when energized  
Note3: This storage indicates a long-term storage state for the unused product before board mounted.  
The operating temperature and moisture range is applied to the non-energized state after the connector has been installed to  
the board.  
Note4: The above standards represent this series. The individual formal agreement should be based on the "Specification".  
■Material  
Product  
Socket  
Part  
Material  
Polyamide  
Finish  
Remarks  
UL94V-0  
––––––  
––––––  
UL94V-0  
––––––  
UL94V-0  
––––––  
––––––  
Insulator  
Contact  
Contact  
Insulator  
Contact  
Insulator  
Contact  
Contact  
White  
ID Contact for Socket  
Crimping Contact for Socket  
Phosphor copper  
Phosphor copper  
Polyamide  
Tin plating or gold plating  
Tin plating or gold plating  
White  
Pin Header  
Brass  
Tin plating or gold plating  
White  
In-line Plug  
Polyamide  
ID Contact for In-line Plug  
Crimping Contact for In-line Plug  
Phosphor copper  
Phosphor copper  
Tin plating or gold plating  
Tin plating or gold plating  
Note: The whisker method is implemented for tin plating.  
B151  
■Ordering Information  
Please determine the specific product. If needed, please select and order the product from the product No. as listed on catalog pages  
B153~B164.  
K Connector  
DF 1B  
-
* S 2.5 RC  
q
w
e
r
t
y
q Series Name  
w Series No.  
: DF  
: 1B  
r
Connector Type  
t
Contact Pitch: 2.5mm  
S
: Single row socket  
: Double row socket  
y Contact Type  
RC : ID/crimping socket (Note)  
e
Number of Contacts  
DS  
P
Single Row : 2~16, 18, 20  
: Single row pin header  
: Double row pin header  
: Single row in-line socket  
DSA : Straight dip  
DP  
ES  
DS : Right angle dip  
Double Row : 4~30, 34, 40  
Note: The single row socket DF1B-*S-2.5R  
only adds "R" to the tail, which has  
the same meaning as "RC".  
DES : Double row in-line socket  
EP : Single row in-line plug  
DEP : Double row in-line plug  
K Socket ID Contact  
DF1B  
-
R 24 F A  
q
w
e
r
q 1. Connection Type  
: ID  
e
Packaging Type  
None : Bag  
R
w
Applicable Cable Size  
24 : AWG24  
F
: Reel  
r
Plating Type  
26 : AWG26  
None : Tin plating  
28 : AWG28  
A
: Gold plating  
K Plug ID Contact  
DF1B  
-
24 P R F B  
q
w
e
r
t
q Applicable Cable Size  
24 : AWG24  
r
Packaging Type  
None : Bag  
26 : AWG26  
F
: Reel  
28 : AWG28  
t
Plating Type  
w
e
Connector Type  
: Plug  
Connection Type  
: ID  
None : Tin plating  
P
A
: Gold plating  
R
K Crimping Contact  
DF1B  
-
24 P R F B  
q
w
e
r
t
q Applicable Cable Size  
2022 : AWG20~22  
2428 : AWG24~28  
e
Plating Type  
None : Tin plating  
A
B
: Gold plating  
28  
: AWG30  
: Gold plating (Note)  
w
Packaging Type  
Note: In case of the socket contact,  
"A" is attached to the tail of  
the product name. In case of  
the plug contact, "B" is  
attached thereto.  
SCF : Socket Contact/Reel  
SC : Socket Contact/Bag  
PCF : Plug Contact/Reel  
PC : Plug Contact/Bag  
B152  
■Single Row Socket  
[Specific No.] –* *, (* *)  
None :100 pcs. per bag  
Photo: Contact Inserted  
Unit: mm  
Product No.  
HRS No.  
Number of Contacts  
A
B
Product No.  
HRS No.  
Number of Contacts  
A
B
2
3
5
2.5  
5
11  
12  
13  
14  
15  
16  
18  
20  
27.5 25  
DF1B- 2S-2.5R  
DF1B- 3S-2.5R  
DF1B- 4S-2.5R  
DF1B- 5S-2.5R  
DF1B- 6S-2.5R  
DF1B- 7S-2.5R  
DF1B- 8S-2.5R  
DF1B- 9S-2.5R  
DF1B-10S-2.5R  
(**  
(**  
(**  
(**  
(**  
(**  
(**  
(**  
(**  
)
)
)
)
)
)
)
)
)
CL541-0200-6-**  
CL541-0201-9-**  
CL541-0202-1-**  
CL541-0203-4-**  
CL541-0204-7-**  
CL541-0205-0-**  
CL541-0206-2-**  
CL541-0207-5-**  
CL541-0208-8-**  
DF1B-11S-2.5R(**  
DF1B-12S-2.5R(**  
DF1B-13S-2.5R(**  
DF1B-14S-2.5R(**  
DF1B-15S-2.5R(**  
DF1B-16S-2.5R(**  
DF1B-18S-2.5R(**  
DF1B-20S-2.5R(**  
)
)
)
)
)
)
)
)
CL541-0209-0-**  
CL541-0210-0-**  
CL541-0211-2-**  
CL541-0212-5-**  
CL541-0213-8-**  
CL541-0214-0-**  
CL541-0215-3-**  
CL541-0216-6-**  
7.5  
30  
27.5  
4
10  
7.5  
32.5 30  
5
12.5 10  
35  
32.5  
6
15  
12.5  
37.5 35  
7
17.5 15  
40  
45  
50  
37.5  
8
20  
17.5  
42.5  
47.5  
9
22.5 20  
10  
25  
22.5  
Note1: The quantity at the specific No."None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.  
Note2: The 2 contact connector contains the convex portion to prevent mis-insertion in the center at one point, which is different from  
the above figure. The 3 to 7 contacts connectors have the area at both ends.  
■Double Row Socket  
[Specific No.] –* *, (* *)  
None :100 pcs. per bag  
Photo: Contact Inserted.  
Unit: mm  
Product No.  
HRS No.  
Number of Contacts  
A
B
Product No.  
HRS No.  
Number of Contacts  
A
B
4
7.5  
2.5  
5
22  
24  
26  
28  
30  
34  
36  
40  
30  
32.5 27.5  
35 30  
37.5 32.5  
25  
DF1B- 4DS-2.5RC(**  
DF1B- 6DS-2.5RC(**  
DF1B- 8DS-2.5RC(**  
DF1B-10DS-2.5RC(**  
DF1B-12DS-2.5RC(**  
DF1B-14DS-2.5RC(**  
DF1B-16DS-2.5RC(**  
DF1B-18DS-2.5RC(**  
DF1B-20DS-2.5RC(**  
)
)
)
)
)
)
)
)
)
CL541-0648-0-**  
CL541-0649-3-**  
CL541-0650-2-**  
CL541-0600-4-**  
CL541-0601-7-**  
CL541-0602-0-**  
CL541-0603-2-**  
CL541-0604-5-**  
CL541-0605-8-**  
DF1B-22DS-2.5RC(**  
DF1B-24DS-2.5RC(**  
DF1B-26DS-2.5RC(**  
DF1B-28DS-2.5RC(**  
DF1B-30DS-2.5RC(**  
DF1B-34DS-2.5RC(**  
DF1B-36DS-2.5RC(**  
DF1B-40DS-2.5RC(**  
)
)
)
)
)
)
)
)
CL541-0606-0-**  
CL541-0607-3-**  
CL541-0608-6-**  
CL541-0609-9-**  
CL541-0610-8-**  
CL541-0612-3-**  
CL541-0613-6-**  
CL541-0615-1-**  
6
10  
8
12.5  
15  
7.5  
10  
12  
14  
16  
18  
20  
10  
17.5 12.5  
20 15  
22.5 17.5  
25 20  
27.5 22.5  
40  
45  
35  
40  
47.5 42.5  
52.5 47.5  
Note1: The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.) If needed, please order the product per bag.  
Note2: The 4 contact connector contains the convex portion to prevent miss-insertion in the center at one point, which is different from  
the above figure.  
B153  
■ Double Row Straight Pin Header  
[Specific No.] –* *, (* *)  
None: Tin plating  
(01) : Gold plating  
■Board Through-hole Diameter:Ø1.1++00.1  
Unit: mm  
Product No.  
HRS No.  
Number of Contacts  
A
B
Product No.  
HRS No.  
Number of Contacts  
A
B
4
7.5  
2.5  
5
20  
22  
24  
26  
28  
30  
34  
40  
27.5 22.5  
30 25  
32.5 27.5  
35 30  
37.5 32.5  
DF1B- 4DP-2.5DSA(**) CL541-0651-5-**  
DF1B- 6DP-2.5DSA(**) CL541-0652-8-**  
DF1B- 8DP-2.5DSA(**) CL541-0653-0-**  
DF1B-10DP-2.5DSA(**) CL541-0616-4-**  
DF1B-12DP-2.5DSA(**) CL541-0617-7-**  
DF1B-14DP-2.5DSA(**) CL541-0618-0-**  
DF1B-16DP-2.5DSA(**) CL541-0619-2-**  
DF1B-18DP-2.5DSA(**) CL541-0620-1-**  
DF1B-20DP-2.5DSA(**) CL541-0621-4-**  
DF1B-22DP-2.5DSA(**) CL541-0622-7-**  
DF1B-24DP-2.5DSA(**) CL541-0623-0-**  
DF1B-26DP-2.5DSA(**) CL541-0624-2-**  
DF1B-28DP-2.5DSA(**) CL541-0625-5-**  
DF1B-30DP-2.5DSA(**) CL541-0626-8-**  
DF1B-34DP-2.5DSA(**) CL541-0628-3-**  
DF1B-40DP-2.5DSA(**) CL541-0631-8-**  
6
10  
8
12.5  
15  
7.5  
10  
12  
14  
16  
18  
10  
17.5 12.5  
20 15  
22.5 17.5  
25 20  
40  
45  
35  
40  
52.5 47.5  
Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.  
Note 2.The 4 and 6 contact connector contains the concave portion to prevent miss-insertion in the center area at one point, which is  
different from the above figure.  
■Double Row Right Angle Pin Header  
[Specific No.] –* *, (* *)  
None: Tin plating  
(01) : Gold plating  
K Board Through-hole Diameter:Ø1.1++00.1  
Unit: mm  
Product No.  
HRS No.  
Number of Contacts  
A
B
Product No.  
HRS No.  
Number of Contacts  
A
B
4
7.5  
2.5  
5
22  
24  
26  
28  
30  
34  
36  
40  
30  
32.5 27.5  
35 30  
37.5 32.5  
25  
DF1B- 4DP-2.5DS(**  
DF1B- 6DP-2.5DS(**  
DF1B- 8DP-2.5DS(**  
DF1B-10DP-2.5DS(**  
DF1B-12DP-2.5DS(**  
DF1B-14DP-2.5DS(**  
DF1B-16DP-2.5DS(**  
DF1B-18DP-2.5DS(**  
DF1B-20DP-2.5DS(**  
)
)
)
)
)
)
)
)
)
CL541-0654-3-**  
CL541-0655-6-**  
CL541-0656-9-**  
CL541-0632-0-**  
CL541-0633-3-**  
CL541-0634-6-**  
CL541-0635-9-**  
CL541-0636-1-**  
CL541-0637-4-**  
DF1B-22DP-2.5DS(**  
DF1B-24DP-2.5DS(**  
DF1B-26DP-2.5DS(**  
DF1B-28DP-2.5DS(**  
DF1B-30DP-2.5DS(**  
DF1B-34DP-2.5DS(**  
DF1B-36DP-2.5DS(**  
DF1B-40DP-2.5DS(**  
)
)
)
)
)
)
)
)
CL541-0638-7-**  
CL541-0639-0-**  
CL541-0640-9-**  
CL541-0641-1-**  
CL541-0642-4-**  
CL541-0644-0-**  
CL541-0645-2-**  
CL541-0647-8-**  
6
10  
8
12.5  
15  
7.5  
10  
12  
14  
16  
18  
20  
10  
17.5 12.5  
20 15  
22.5 17.5  
25 20  
27.5 22.5  
40  
45  
35  
40  
47.5 42.5  
52.5 47.5  
Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.  
Note 2.The 4 and 6 contact connector contains the concave portion to prevent miss-insertion in the center area at one point, which is  
different from the above figure.  
B154  
■ Single Row Straight Pin Header for Potting  
B Tube Size  
Unit: mm  
K Board Positioning Boss Hole Diameter:Ø1.1++00.1  
K Board Through-hole Diameter:Ø1.1++00.1  
Product No.  
HRS No.  
Number of Contacts  
A
B
Tube Package Quantity  
2
3
2.5  
5
7.5  
64pieces  
48  
DF1BD- 2P-2.5DSA(**  
DF1BD- 3P-2.5DSA(**  
DF1BD- 4P-2.5DSA(**  
DF1BD- 5P-2.5DSA(**  
DF1BD- 6P-2.5DSA(**  
DF1BD- 7P-2.5DSA(**  
DF1BD- 8P-2.5DSA(**  
DF1BD- 9P-2.5DSA(**  
DF1BD-10P-2.5DSA(**  
)
)
)
)
)
)
)
)
)
CL541-0800-3-**  
CL541-0801-6-**  
CL541-0802-9-**  
CL541-0803-1-**  
CL541-0804-4-**  
CL541-0805-7-**  
CL541-0806-0-**  
CL541-0807-2-**  
CL541-0808-5-**  
10  
4
7.5 12.5  
38  
[Specific No.] –* *, (* *)  
None: Tin plating  
(20) : Tin plated, tube packaging  
5
10  
15  
32  
6
12.5 17.5  
27  
7
15  
17.5 22.5  
20 25  
22.5 27.5  
20  
24  
8
21  
9
19  
10  
17  
Note 1.A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the product per pack.  
Note 2.Please order the tube packaging products, multiplying the packaging quantity (pieces).  
Note 3.The 2 and 3 contact connector contains the concave portion to prevent miss-insertion in the center at one point, which is  
different from the above figure.In addition, the 4 to 7 contacts connectors have two concave portions at both ends.  
BApplicable Potting Thickness : 6mm  
Potting status  
B155  
■ Single Row Straight Pin Header  
[Specific No.] –* *, (* *)  
None: Tin plating  
(01) : Gold plating  
K Board Through-hole Diameter:Ø1.1++00.1  
Unit: mm  
Product No.  
HRS No.  
Number of Contacts  
A
B
Product No.  
HRS No.  
Number of Contacts  
A
B
2
3
2.5  
5
7.5  
11  
12  
13  
14  
15  
16  
18  
20  
25  
27.5 32.5  
30 35  
32.5 37.5  
35 40  
30  
DF1B- 2P-2.5DSA(**  
DF1B- 3P-2.5DSA(**  
DF1B- 4P-2.5DSA(**  
DF1B- 5P-2.5DSA(**  
DF1B- 6P-2.5DSA(**  
DF1B- 7P-2.5DSA(**  
DF1B- 8P-2.5DSA(**  
DF1B- 9P-2.5DSA(**  
DF1B-10P-2.5DSA(**  
)
)
)
)
)
)
)
)
)
CL541-0225-7-**  
CL541-0226-0-**  
CL541-0227-2-**  
CL541-0228-5-**  
CL541-0229-8-**  
CL541-0230-7-**  
CL541-0231-0-**  
CL541-0232-2-**  
CL541-0233-5-**  
DF1B-11P-2.5DSA(**  
DF1B-12P-2.5DSA(**  
DF1B-13P-2.5DSA(**  
DF1B-14P-2.5DSA(**  
DF1B-15P-2.5DSA(**  
DF1B-16P-2.5DSA(**  
DF1B-18P-2.5DSA(**  
DF1B-20P-2.5DSA(**  
)
)
)
)
)
)
)
)
CL541-0234-8-**  
CL541-0235-0-**  
CL541-0236-3-**  
CL541-0237-6-**  
CL541-0238-9-**  
CL541-0239-1-**  
CL541-0240-0-**  
CL541-0241-3-**  
10  
4
7.5 12.5  
5
10  
15  
6
12.5 17.5  
7
15  
17.5 22.5  
20 25  
22.5 27.5  
20  
37.5 42.5  
42.5 47.5  
47.5 52.5  
8
9
10  
Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.) If needed, please order the product per bag.  
Note 2.The 2 and 3 contact connector contains the concave portion to prevent miss-insertion in the center at one point, which is  
different from the above figure.In addition, the 4 to 7 contact connectors have two concave portions at both ends.  
■ Single Row Right Angle Pin Header  
[Specific No.] –* *, (* *)  
None: Tin plating  
(01) : Gold plating  
K Board Through-hole Diameter:Ø1.1++00.1  
Unit: mm  
Product No.  
HRS No.  
Number of Contacts  
A
B
Product No.  
HRS No.  
Number of Contacts  
A
B
2
3
2.5  
5
7.5  
11  
12  
13  
14  
15  
16  
18  
20  
25  
27.5 32.5  
30 35  
32.5 37.5  
35 40  
30  
DF1B- 2P-2.5DS(**  
DF1B- 3P-2.5DS(**  
DF1B- 4P-2.5DS(**  
DF1B- 5P-2.5DS(**  
DF1B- 6P-2.5DS(**  
DF1B- 7P-2.5DS(**  
DF1B- 8P-2.5DS(**  
DF1B- 9P-2.5DS(**  
DF1B-10P-2.5DS(**  
)
)
)
)
)
)
)
)
)
CL541-0242-6-**  
CL541-0243-9-**  
CL541-0244-1-**  
CL541-0245-4-**  
CL541-0246-7-**  
CL541-0247-0-**  
CL541-0248-2-**  
CL541-0249-5-**  
CL541-0250-4-**  
DF1B-11P-2.5DS(**  
DF1B-12P-2.5DS(**  
DF1B-13P-2.5DS(**  
DF1B-14P-2.5DS(**  
DF1B-15P-2.5DS(**  
DF1B-16P-2.5DS(**  
DF1B-18P-2.5DS(**  
DF1B-20P-2.5DS(**  
)
)
)
)
)
)
)
)
CL541-0251-7-**  
CL541-0252-0-**  
CL541-0253-2-**  
CL541-0254-5-**  
CL541-0255-8-**  
CL541-0256-0-**  
CL541-0257-3-**  
CL541-0258-6-**  
10  
4
7.5 12.5  
5
10  
15  
6
12.5 17.5  
7
15  
17.5 22.5  
20 25  
22.5 27.5  
20  
37.5 42.5  
42.5 47.5  
47.5 52.5  
8
9
10  
Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.  
Note 2.The 4 and 6 contact connector contains the concave portion to prevent miss-insertion in the center at one point, which is  
different from the above figure.  
B156  
■■Single Row In-line Plug(Simple Lock Type)  
K Applicable Socket: DF1B-*S-2.5R  
[Specific No.] –* *, (* *)  
None: Tin plating  
(01) : Gold plating  
Contact Inserted.  
Unit: mm  
Product No.  
HRS No.  
Number of Contacts  
A
B
Product No.  
HRS No.  
Number of Contacts  
A
B
2
3
4
5
6
7
2.5  
5
7.1  
9.6  
8
17.5 22.1  
20 24.6  
22.5 27.1  
25 29.6  
27.5 32.1  
30 34.6  
DF1BA- 2EP-2.5RC(**) CL541-0700-9-**  
DF1BA- 3EP-2.5RC(**) CL541-0701-1-**  
DF1BA- 4EP-2.5RC(**) CL541-0702-4-**  
DF1BA- 5EP-2.5RC(**) CL541-0703-7-**  
DF1BA- 6EP-2.5RC(**) CL541-0704-0-**  
DF1BA- 7EP-2.5RC(**) CL541-0705-2-**  
DF1BA- 8EP-2.5RC** CL541-0706-5-**  
DF1BA- 9EP-2.5RC** CL541-0707-8-**  
DF1BA-10EP-2.5RC** CL541-0708-0-**  
DF1BA-11EP-2.5RC** CL541-0709-3-**  
DF1BA-12EP-2.5RC** CL541-0710-2-**  
DF1BA-13EP-2.5RC** CL541-0711-5-**  
9
7.5 12.1  
10  
11  
12  
13  
10  
14.6  
12.5 17.1  
15  
19.6  
Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.  
Note 2.The 2 contacts connector contains the concave portion to prevent miss-insertion in the center area at one point, which is  
different from the above figure.In addition, the 3 to 7 contact connectors contain the concave portion at both sides.  
B Panel Cutouts  
Unit: mm  
C
Panel Board Thickness (Note 1)  
Applicable Plug  
Number of Contacts  
D
0.5~1.2  
1.3~1.6  
11.9  
14.4  
16.9  
19.4  
21.9  
24.4  
26.9  
29.4  
31.9  
34.4  
36.9  
39.4  
1.7~2.0  
2
3
11.2  
13.7  
16.2  
18.7  
21.2  
23.7  
26.2  
28.7  
31.2  
33.7  
36.2  
38.7  
12.6  
15.1  
17.6  
20.1  
22.6  
25.1  
27.6  
30.1  
32.6  
35.1  
37.6  
40.1  
7.3  
DF1BA- 2EP-2.5RC(**  
DF1BA- 3EP-2.5RC(**  
DF1BA- 4EP-2.5RC(**  
DF1BA- 5EP-2.5RC(**  
DF1BA- 6EP-2.5RC(**  
DF1BA- 7EP-2.5RC(**  
DF1BA- 8EP-2.5RC(**  
DF1BA- 9EP-2.5RC(**  
DF1BA-10EP-2.5RC(**  
DF1BA-11EP-2.5RC(**  
DF1BA-12EP-2.5RC(**  
DF1BA-13EP-2.5RC(**  
)
)
)
)
)
)
)
)
)
)
)
)
9.8  
4
12.3  
14.8  
17.3  
19.8  
22.3  
24.8  
27.3  
29.8  
32.3  
34.8  
5
6
7
8
9
10  
11  
12  
13  
Note 1.The installation hole size C according to panel board thickness.  
Note 2.Fabricate installation holes so that no burr can occur.  
B157  
■ Double Row In-line Plug (Simple Lock Type)  
K Applicable Socket: DF1B-*DS-2.5RC  
[Specific No.] –* *, (* *)  
None: 100 pcs. per pack  
Contact Inserted.  
Unit: mm  
Product No.  
HRS No.  
Number of Contacts  
A
B
Product No.  
HRS No.  
Number of Contacts  
A
B
4
2.5  
5
8.6  
20  
22  
24  
26  
28  
30  
34  
22.5 28.6  
25 31.1  
27.5 33.6  
30 36.1  
32.5 38.6  
DF1BA- 4DEP-2.5RC(**) CL541-0719-7-**  
DF1BA- 6DEP-2.5RC(**) CL541-0720-6-**  
DF1BA- 8DEP-2.5RC(**) CL541-0721-9-**  
DF1BA-10DEP-2.5RC(**) CL541-0722-1-**  
DF1BA-12DEP-2.5RC(**) CL541-0723-4-**  
DF1BA-14DEP-2.5RC(**) CL541-0724-7-**  
DF1BA-16DEP-2.5RC(**) CL541-0725-0-**  
DF1BA-18DEP-2.5RC(**) CL541-0726-2-**  
DF1BA-20DEP-2.5RC(**) CL541-0727-5-**  
DF1BA-22DEP-2.5RC(**) CL541-0728-8-**  
DF1BA-24DEP-2.5RC(**) CL541-0729-0-**  
DF1BA-26DEP-2.5RC(**) CL541-0730-0-**  
DF1BA-28DEP-2.5RC(**) CL541-0731-2-**  
DF1BA-30DEP-2.5RC(**) CL541-0732-5-**  
DF1BA-34DEP-2.5RC(**) CL541-0734-0-**  
6
11.1  
8
7.5 13.6  
10  
12  
14  
16  
18  
10  
16.1  
12.5 18.6  
15  
17.5 23.6  
20 26.1  
21.1  
35  
40  
41.1  
46.1  
Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.  
Note 2.The 4 contacts connector contains the concave portion to prevent miss-insertion in the center at one point, which is different  
from the above figure.  
B Panel Cutouts  
Unit: mm  
C
Panel Board Thickness (Note 1)  
0.5~1.2 1.7~2.0  
Applicable Plug  
Number of Contacts  
D
1.3~1.6  
13.4  
15.9  
18.4  
20.9  
23.4  
25.9  
28.4  
30.9  
33.4  
35.9  
38.4  
40.9  
43.4  
45.9  
50.9  
DF1BA- 4DEP-2.5RC  
DF1BA- 6DEP-2.5RC  
DF1BA- 8DEP-2.5RC  
DF1BA-10DEP-2.5RC  
DF1BA-12DEP-2.5RC  
DF1BA-14DEP-2.5RC  
DF1BA-16DEP-2.5RC  
DF1BA-18DEP-2.5RC  
DF1BA-20DEP-2.5RC  
DF1BA-22DEP-2.5RC  
DF1BA-24DEP-2.5RC  
DF1BA-26DEP-2.5RC  
DF1BA-28DEP-2.5RC  
DF1BA-30DEP-2.5RC  
DF1BA-34DEP-2.5RC  
4
12.7  
15.2  
17.7  
20.2  
22.7  
25.2  
27.7  
30.2  
32.7  
35.2  
37.7  
40.2  
42.7  
45.2  
50.2  
14.1  
16.6  
19.1  
21.6  
24.1  
26.6  
29.1  
31.6  
34.1  
36.6  
39.1  
41.6  
44.1  
46.6  
51.6  
8.8  
6
11.3  
13.8  
16.3  
18.8  
21.3  
23.8  
26.3  
28.8  
31.3  
33.8  
36.3  
38.8  
41.3  
46.3  
8
10  
12  
14  
16  
18  
20  
22  
24  
26  
28  
30  
34  
Note 1.The installation hole size C according to panel board thickness.  
Note 2.Fabricate installation holes so that no burr can occur.  
B158  
■ Single Row In-line Socket (Full Lock Type)  
K Applicable Socket: DF1B-*DEP-2.5RC  
[Specific No.] –* *, (* *)  
None: 100 pcs. per pack  
Contact Inserted.  
Unit: mm  
Product No.  
DF1B- 2ES-2.5RC  
DF1B- 3ES-2.5RC  
DF1B- 4ES-2.5RC  
DF1B- 5ES-2.5RC  
DF1B- 6ES-2.5RC  
DF1B- 7ES-2.5RC  
HRS No.  
CL541-0320-8-  
CL541-0321-0-  
CL541-0322-3-  
CL541-0323-6-  
CL541-0324-9-  
CL541-0325-1-  
Number of Contacts  
A
B
Product No.  
DF1B- 8ES-2.5RC  
DF1B- 9ES-2.5RC  
DF1B-10ES-2.5RC  
DF1B-11ES-2.5RC  
DF1B-12ES-2.5RC  
DF1B-13ES-2.5RC  
HRS No.  
Number of Contacts  
A
B
2
3
4
5
6
7
2.5  
5
6.5  
9
CL541-0326-4-  
CL541-0327-7-  
CL541-0328-0-  
CL541-0329-2-  
CL541-0330-1-  
CL541-0331-4-  
8
17.5 21.5  
20 24  
22.5 26.5  
25 29  
27.5 31.5  
30 34  
9
7.5 11.5  
10  
11  
12  
13  
10  
14  
12.5 16.5  
15  
19  
Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.  
B Panel Cutouts  
Unit: mm  
E
Panel Board Thickness (Note 1)  
Applicable Plug  
Number of Contacts  
C
D
0.5~1.2  
1.3~1.6  
11.3  
13.8  
16.3  
18.8  
21.3  
23.8  
26.3  
28.8  
31.3  
33.8  
36.3  
38.8  
1.7~2.0  
DF1B- 2ES-2.5RC  
DF1B- 3ES-2.5RC  
DF1B- 4ES-2.5RC  
DF1B- 5ES-2.5RC  
DF1B- 6ES-2.5RC  
DF1B- 7ES-2.5RC  
DF1B- 8ES-2.5RC  
DF1B- 9ES-2.5RC  
DF1B-10ES-2.5RC  
DF1B-11ES-2.5RC  
DF1B-12ES-2.5RC  
DF1B-13ES-2.5RC  
2
3
4.7  
7.2  
6.7  
10.8  
13.3  
15.8  
18.3  
20.8  
23.3  
25.8  
28.3  
30.8  
33.3  
35.8  
38.3  
12  
14.5  
17  
9.2  
4
9.7  
11.7  
14.2  
16.7  
19.2  
21.7  
24.2  
26.7  
29.2  
31.7  
34.2  
5
12.2  
14.7  
17.2  
19.7  
22.2  
24.7  
27.2  
29.7  
32.2  
19.5  
22  
6
7
24.5  
27  
8
9
29.5  
32  
10  
11  
12  
13  
34.5  
37  
39.5  
Note 1.The installation hole size C will be changed according to panel board thickness.  
Note 2.Fabricate installation holes so that no burr can occur.  
B159  
■ Double Row In-line Socket (Full Lock Type)  
K Applicable Socket: DF1B-*EP-2.5RC  
[Specific No.] –* *, (* *)  
None: 100 pcs. per pack  
Contact Inserted.  
Unit: mm  
Product No.  
HRS No.  
Number of Contacts  
A
B
Product No.  
HRS No.  
Number of Contacts  
A
B
10  
12  
14  
16  
18  
20  
22  
10  
12.5 17.5  
15 20  
17.5 22.5  
20 25  
22.5 27.5  
25 30  
15  
24  
26  
28  
30  
32  
34  
27.5 32.5  
30 35  
32.5 37.5  
35 40  
37.5 42.5  
40 45  
DF1B-10DES-2.5RC(**) CL541-0351-1-**  
DF1B-12DES-2.5RC(**) CL541-0352-4-**  
DF1B-14DES-2.5RC(**) CL541-0353-7-**  
DF1B-16DES-2.5RC(**) CL541-0354-0-**  
DF1B-18DES-2.5RC(**) CL541-0346-1-**  
DF1B-20DES-2.5RC(**) CL541-0355-2-**  
DF1B-22DES-2.5RC(**) CL541-0356-5-**  
DF1B-24DES-2.5RC(**) CL541-0357-8-**  
DF1B-26DES-2.5RC(**) CL541-0358-0-**  
DF1B-28DES-2.5RC(**) CL541-0359-3-**  
DF1B-30DES-2.5RC(**) CL541-0360-2-**  
DF1B-32DES-2.5RC(**) CL541-0361-5-**  
DF1B-34DES-2.5RC(**) CL541-0362-8-**  
Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.  
B Panel Cutouts  
Unit: mm  
C
Panel Board Thickness (Note 1)  
Applicable Plug  
Number of Contacts  
D
E
0.5~1.2  
1.3~1.6  
19.8  
22.3  
24.8  
27.3  
29.8  
32.3  
34.8  
37.3  
39.8  
42.3  
44.8  
47.3  
49.8  
1.7~2.0  
10  
12  
14  
16  
18  
20  
22  
24  
26  
28  
30  
32  
34  
19.1  
21.6  
24.1  
26.6  
29.1  
31.6  
34.1  
36.6  
39.1  
41.6  
44.1  
46.6  
49.1  
20.5  
23  
15.2  
17.7  
20.2  
22.7  
25.2  
27.7  
30.2  
32.7  
35.2  
37.7  
40.2  
42.7  
45.2  
3.7  
3.7  
3.7  
3.7  
3.7  
5.2  
5.2  
5.2  
5.2  
5.2  
5.2  
5.2  
5.2  
DF1B-10DES-2.5RC(**)  
DF1B-12DES-2.5RC(**)  
DF1B-14DES-2.5RC(**)  
DF1B-16DES-2.5RC(**)  
DF1B-18DES-2.5RC(**)  
DF1B-20DES-2.5RC(**)  
DF1B-22DES-2.5RC(**)  
DF1B-24DES-2.5RC(**)  
DF1B-26DES-2.5RC(**)  
DF1B-28DES-2.5RC(**)  
DF1B-30DES-2.5RC(**)  
DF1B-32DES-2.5RC(**)  
DF1B-34DES-2.5RC(**)  
25.5  
28  
30.5  
33  
35.5  
38  
40.5  
43  
45.5  
48  
50.5  
Note 1.The installation hole size C according to panel board thickness.  
Note 2.Fabricate installation holes so that no burr can occur.  
B160  
■ Single Row In-line Plug (Full Lock Type)  
Socket: DF1B-*ES-2.5RC  
No.] –* *, (* *)  
pcs. per pack  
Contact Inserted.  
Unit: mm  
Product No.  
HRS No.  
Number of Contacts  
A
B
Product No.  
HRS No.  
Number of Contacts  
A
B
2
3
4
5
6
7
8.9  
2.5  
5
8
23.9 17.5  
26.4 20  
28.9 22.5  
31.4 25  
33.9 27.5  
36.4 30  
DF1B- 2EP-2.5RC(**)  
DF1B- 3EP-2.5RC(**)  
DF1B- 4EP-2.5RC(**)  
DF1B- 5EP-2.5RC(**)  
DF1B- 6EP-2.5RC(**)  
DF1B- 7EP-2.5RC(**)  
CL541-0332-7-**  
CL541-0333-0-**  
CL541-0334-2-**  
CL541-0335-5-**  
CL541-0336-8-**  
CL541-0337-0-**  
DF1B- 8EP-2.5RC(**) CL541-0338-3-**  
DF1B- 9EP-2.5RC(**) CL541-0339-6-**  
DF1B-10EP-2.5RC(**) CL541-0340-5-**  
DF1B-11EP-2.5RC(**) CL541-0341-8-**  
DF1B-12EP-2.5RC(**) CL541-0342-0-**  
DF1B-13EP-2.5RC(**) CL541-0343-3-**  
11.4  
13.9  
9
7.5  
10  
11  
12  
13  
16.4 10  
18.9 12.5  
21.4 15  
Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.  
■ Double Row In-line Plug (Full Lock Type)  
pplicable Socket: DF1B-*DES-2.5RC  
Specific No.] –* *, (* *)  
one: 100 pcs. per pack  
Contact Inserted.  
Unit: mm  
Product No.  
HRS No.  
Number of Contacts  
A
B
Product No.  
HRS No.  
Number of Contacts  
A
B
10  
12  
14  
16  
18  
20  
22  
17.2 10  
19.7 12.5  
22.2 15  
24.7 17.5  
27.2 20  
29.7 22.5  
32.2 25  
24  
26  
28  
30  
32  
34  
34.7 27.5  
37.2 30  
39.7 32.5  
42.2 35  
44.7 37.5  
47.2 40  
DF1B-10DEP-2.5RC(**) CL541-0366-9-**  
DF1B-12DEP-2.5RC(**) CL541-0367-1-**  
DF1B-14DEP-2.5RC(**) CL541-0368-4-**  
DF1B-16DEP-2.5RC(**) CL541-0369-7-**  
DF1B-18DEP-2.5RC(**) CL541-0350-9-**  
DF1B-20DEP-2.5RC(**) CL541-0370-6-**  
DF1B-22DEP-2.5RC(**) CL541-0371-9-**  
DF1B-24DEP-2.5RC(**) CL541-0372-1-**  
DF1B-26DEP-2.5RC(**) CL541-0373-4-**  
DF1B-28DEP-2.5RC(**) CL541-0374-7-**  
DF1B-30DEP-2.5RC(**) CL541-0375-0-**  
DF1B-32DEP-2.5RC(**) CL541-0376-2-**  
DF1B-34DEP-2.5RC(**) CL541-0377-5-**  
Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.  
B161  
■ ID Contact for Socket  
Unit: mm  
Finish  
Applicable Cable  
Applicable  
Product No. HRS No.  
Cable Indication  
Packaging  
Type  
Quantity  
AWG  
UL Style  
Wire Construction Jacket Diameter  
Reel  
Bag  
Reel  
Bag  
Reel  
Bag  
Reel  
Bag  
Reel  
Bag  
Reel  
Bag  
10000  
100  
DF1B-R24F(**)  
DF1B-R24(**)  
DF1B-R26F(**)  
DF1B-R26(**)  
DF1B-R28F(**)  
DF1B-R28(**)  
DF1B-R24FA(**)  
DF1B-R24A(**)  
DF1B-R26FA(**)  
DF1B-R26A(**)  
DF1B-R28FA(**)  
DF1B-R28A(**)  
CL541-0217-9**  
CL541-0220-3**  
CL541-0218-1**  
CL541-0221-6**  
CL541-0219-4**  
CL541-0222-9**  
CL541-0261-0**  
CL541-0264-9**  
CL541-0262-3**  
CL541-0265-1**  
CL541-0263-6**  
CL541-0266-4**  
24  
26  
28  
24  
26  
28  
AWG 24  
11 cores./0.16mm  
7 cores./0.16mm  
7 cores./0.127mm  
11 cores./0.16mm  
7 cores./0.16mm  
7 cores./0.127mm  
0.9~1.39mm  
0.9~1.39mm  
0.9~1.39mm  
0.9~1.39mm  
0.9~1.39mm  
0.9~1.39mm  
1061  
1061  
1007  
1061  
1007  
10000  
100  
AWG 26  
AWG 28  
AWG 24  
AWG 26  
AWG 28  
Tin plating  
10000  
100  
10000  
100  
1061  
1061  
1007  
1061  
1007  
10000  
100  
Gold plating  
10000  
100  
K
ID Contact Extraction Tool DF-C-PO (A)  
Note 1.The applicable cable conductor is the tin plated annealing copper wire.  
Note 2.If other cables are used instead of the applicable cable, cotact Hirose sales department.  
■ Crimping Contact for Socket  
K
Applicable Cable (Tin Plated Annealing Copper Wire)  
K
K
Recommended Cable  
UL1061, UL1007  
Strip Length  
Conductor Size (Wire construction)  
AWG20 (21cores/0.18mm)  
AWG22 (17cores/0.16mm)  
AWG24 (11cores/0.16mm)  
AWG26 (7cores/0.16mm)  
AWG28 (7cores0.127mm)  
AWG30 (7cores/0.1mm)  
2.0~2.5mm  
Note:If other cables are used instead  
of the applicable cable, consult  
Hirose sales department.  
Unit: mm  
Applicable Cable  
Applicable  
Packaging  
Type  
Product No. HRS No.  
Quantity  
Finish  
Cable Indication  
AWG  
AWG 20~  
AWG 22  
AWG 24~  
AWG 28  
AWG 30  
Jacket Diameter  
20  
22  
24  
28  
Reel  
Bag  
Reel  
Bag  
Reel  
Bag  
Reel  
Bag  
Reel  
Bag  
Reel  
Bag  
10000  
100  
DF1B-2022SCF(**)  
DF1B-2022SC(**)  
DF1B-2428SCF(**)  
DF1B-2428SC(**)  
DF1B-30SCF(**)  
DF1B-30SC(**)  
CL541-0223-1**  
CL541-0224-4**  
CL541-0678-1**  
CL541-0679-4**  
CL541-0682-9**  
CL541-0683-1**  
CL541-0662-1**  
CL541-0663-4**  
CL541-0680-3**  
CL541-0681-6**  
CL541-0684-4**  
CL541-0685-7**  
1.2~1.9mm  
0.9~1.5mm  
0.6~1.2mm  
1.2~1.9mm  
0.9~1.5mm  
0.6~1.2mm  
10000  
100  
Tin plating  
10000  
100  
30  
20  
22  
24  
28  
10000  
100  
DF1B-2022SCFA(**)  
DF1B-2022SCA(**)  
DF1B-2428SCFA(**)  
DF1B-2428SCA(**)  
DF1B-30SCFA(**)  
DF1B-30SCA(**)  
AWG 20~  
AWG 22  
10000  
100  
AWG 24~  
AWG 28  
Gold plating  
10000  
100  
30  
AWG 30  
K Crimping Contact Extraction Tool DF-C-PO (B)  
B162  
■ ID Contact for Plug  
Unit: mm  
Finish  
Applicable Cable  
Applicable  
Product No. HRS No.  
Cable Indication  
Packaging  
Type  
Quantity  
AWG  
UL Style  
Wire structure Jacket Diameter  
Reel  
Bag  
Reel  
Bag  
Reel  
Bag  
Reel  
Bag  
Reel  
Bag  
Reel  
Bag  
10000  
100  
DF1B-24PRF(**)  
DF1B-24PR(**)  
DF1B-26PRF(**)  
DF1B-26PR(**)  
DF1B-28PRF(**)  
DF1B-28PR(**)  
DF1B-24PRFB(**)  
DF1B-24PRB(**)  
DF1B-26PRFB(**)  
DF1B-26PRB(**)  
DF1B-28PRFB(**)  
DF1B-28PRB(**)  
CL541-0666-2**  
CL541-0667-5**  
CL541-0668-8**  
CL541-0669-0**  
CL541-0670-0**  
CL541-0671-2**  
CL541-0672-5**  
CL541-0673-8**  
CL541-0674-0**  
CL541-0675-3**  
CL541-0676-6**  
CL541-0677-9**  
24  
26  
28  
24  
26  
28  
AWG 24  
11 pcs./0.16mm  
7 pcs./0.16mm  
7 pcs./0.127mm  
11 pcs./0.16mm  
7 pcs./0.16mm  
7 pcs./0.127mm  
0.9~1.39mm  
0.9~1.39mm  
0.9~1.39mm  
0.9~1.39mm  
0.9~1.39mm  
0.9~1.39mm  
1061  
1061  
1007  
1061  
1007  
10000  
100  
AWG 26  
AWG 28  
AWG 24  
AWG 26  
AWG 28  
Tin plating  
10000  
100  
10000  
100  
1061  
1061  
1007  
1061  
1007  
10000  
100  
Gold plating  
10000  
100  
K
ID Contact Extraction Tool DF-C-PO (C)  
Note 1.The applicable cable conductor is the tin plated annealing copper wire.  
Note 2.If other cables are used instead of the applicable cable, contact Hirose sales department.  
■ Crimping Contact for Plug  
K
Applicable Cable (Tin Plated Annealing Copper Wire)  
K
K
Recommended Cable  
UL1061, UL1007  
Strip Length  
Conductor Size (Contact wire construction)  
AWG20 (21 pieces/0.18mm)  
AWG22 (17 pieces/0.16mm)  
AWG24 (11 pieces/0.16mm)  
AWG26 (7 pieces/0.16mm)  
3.0~3.7mm  
Note:If other cables are used instead  
of the applicable cable, consult  
Hirose sales department.  
AWG28 (7 pieces/0.127mm)  
AWG30 (7 pieces/0.1mm)  
Unit: mm  
Applicable Cable  
Packaging  
Product No. HRS No.  
Quantity  
Treatment  
Type  
Reel  
Bag  
Reel  
Bag  
Reel  
Bag  
Reel  
Bag  
Reel  
Bag  
Reel  
Bag  
AWG  
AWG 20~  
AWG 22  
Jacket Diameter  
10000  
100  
DF1B-2022PCF(**) CL541-0259-9**  
1.2~1.9mm  
0.9~1.5mm  
0.6~1.2mm  
1.2~1.9mm  
0.9~1.5mm  
0.6~1.2mm  
DF1B-2022PC(**)  
CL541-0260-8**  
10000  
100  
DF1B-2428PCF(**) CL541-0664-7**  
AWG 24~  
AWG 28  
Tin plating  
DF1B-2428PC(**)  
DF1B-30PCF(**)  
DF1B-30PC(**)  
CL541-0665-0**  
CL541-0686-0**  
CL541-0687-2**  
10000  
100  
AWG 30  
10000  
100  
DF1B-2022PCFB(**) CL541-0690-7**  
DF1B-2022PCB(**) CL541-0691-0**  
DF1-PD2428SCFB(**) CL541-0660-6**  
DF1-PD2428SCB(**) CL541-0661-9**  
AWG 20~  
AWG 22  
10000  
100  
AWG 24~  
AWG 28  
Gold plating  
10000  
100  
DF1B-30PCFB(**)  
DF1B-30PCB(**)  
CL541-0688-5**  
CL541-0689-8**  
AWG 30  
K Crimping Contact Extraction Tool DF-C-PO (C)  
B163  
B Applicable Tool  
[Press Main Unit and Applicator]  
[Manual Crimping Tool]  
Connection Type  
Type  
Product No.  
AP105-DF1B-R  
AP105-DF1B-PR  
DF1B-T2428HR  
DF1B-T2428PHR  
AP105-DF1B-2022S  
AP105-DF1B-2428S  
AP105-DF1B-30S  
AP105-DF1B-2022P  
AP105-DF1B-2428P  
AP105-DF1B-30P  
DF1B-TA2022SHC  
DF1B-TA2428SHC  
DF1B-TA30SHC  
DF1B-TA2022PHC  
DF1B-TA2428PHC  
DF1B-TA30PHC  
CM-105  
HRS No.  
Applicable Contacts  
DF1B-R**F/FA **=24,26,28  
DF1B-**PRF/PRFB**=24,26,28  
DF1B-R**/A **=24,26,28  
DF1B-**PR/PRB **=24,26,28  
DF1B-2022SCF/SCFA  
CL901-4507-4  
CL901-4536-2  
CL550-0171-0  
CL550-0221-7  
CL901-4510-9  
CL901-4518-0  
CL901-4517-8  
CL901-4509-0  
CL901-4521-5  
CL901-4519-3  
CL550-0182-7  
CL550-0209-1  
CL550-0211-3  
CL550-0183-0  
CL550-0224-5  
CL550-0210-0  
CL901-0005-4  
CL550-0170-8  
CL550-0179-2  
CL550-0198-7  
Applicator  
ID  
Manual ID tool  
Applicator  
DF1B-2428SCF/SCFA  
DF1B-30SCF/SCFA  
DF1B-2022PCF/PCFB  
DF1B-2428PCF,DF1-PD2428SCF/SCFB  
DF1B-30PCF/PCFB  
Crimping  
DF1B-2022SC/SCA  
DF1B-2428SC/SCA  
Manual  
DF1B-30SC/SCA  
crimping tool  
DF1B-2022PC/PCB  
DF1B-2428PC,DF1-PD2428SCB  
DF1B-30PC/PCB  
Press Main Unit  
__________________________________  
DF1B-R**F  
DF-C-PO(A)  
Extraction Tool  
DF-C-PO(B)  
DF1B-****SCF  
DF-C-PO(C)  
DF1B-****PC,DF1B-**PRF  
Note: If a trouble has occurred due to tools which are not designated by Hirose, Hirose won't guarantee any product  
B164  
B Applicable Tool  
BPrecautions for Use  
1. Recommended Soldering Condition ■Flow Condition with Automatic Solder Machine  
Soldering temperature: 250 5ç, Soldering time: Within 3 seconds  
■Manual Soldering Condition  
Soldering iron temperature: 250 5ç, Soldering time: Within 2 seconds  
Refer to the "Nylon Connector Instruction Manual".  
2. Cleaning Condition  
3. Connection Condition  
4. Cautions  
Refer to the "Nylon Connector Instruction Manual".  
■The color phase of this product is slightly different from that of the formed product according to  
the manufacturing lot and future storage conditions, but the difference doesn't affect the  
performance.  
B165  

相关型号：

DF1BA-6DEP-2.5RC

 2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
MURATA

DF1BA-6DEP-2.5RC

 2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
HRS

DF1BA-6EP-2.5RC

 2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
MURATA

DF1BA-6EP-2.5RC

 2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
HRS

DF1BA-7EP-2.5RC

 2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
MURATA

DF1BA-7EP-2.5RC

 2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
HRS

DF1BA-7EP-2.5RC(01)

 Board Connector, 7 Contact(s), 1 Row(s), Male, 0.098 inch Pitch, Locking Mech, White Insulator, Receptacle
HRS

DF1BA-8DEP-2.5RC

 2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
MURATA

DF1BA-8DEP-2.5RC

 2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
HRS

DF1BA-8EP-2.5RC

 2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
MURATA

DF1BA-8EP-2.5RC

 2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
HRS

DF1BA-9EP-2.5RC

 2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
MURATA
©2020 ICPDF网 联系我们和版权申明