DF1E-3P-2.5DS(01) [HRS]
Board Connector, 3 Contact(s), 1 Row(s), Male, Right Angle, Solder Terminal, ROHS COMPLIANT;型号: | DF1E-3P-2.5DS(01) |
厂家: | HRS |
描述: | Board Connector, 3 Contact(s), 1 Row(s), Male, Right Angle, Solder Terminal, ROHS COMPLIANT 连接器 |
文件: | 总16页 (文件大小:298K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
DF1E Series
UL, C-CL Listed
Full lock function
added
Inner-lock system
full lock mechanism
Mis-insertion
prevention
Photo 1
■Features
1. Full Lock Function Added
Double lock
engaged
The inner lock system adopts a full lock mechanism.
This mechanism prevents disengagement to occur due to
an unexpected external shock. (Refer to photo 1)
Double lock
engaged
2. Increase in Crimping Contact Fixation Force and
Semi-insertion Prevention
The double lock is activated for the use method to give a
stress to the cable, to increase crimping contact fixation
force, and to prevent the semi-insertion of the crimping
contact. (Refer to photo 2)
3. Mold Lance Adopted
Since the contact lance may be deformed involving in the
contact after the crimping process, the mold lance has been
adopted.
4. Mis-insertion Prevention
Photo 2
Equipped with the mechanism to completely prevent reverse
insertion and insertion between dissimilar contacts.
8. Various Applications
5. Means to Prevent Solder Crack
With the same series, various applications can
be used for the board solder dip type and in-
line.
The glass enforcement resin is adopted for the pin header to
prevent a solder crack to occur due to heat compression.
6. Correspond to Potting
9. Listed by UL, C-UL
Corresponding to potting, the pin header is provided for
product variations.
Corresponding to potting up to 8mm and mounting height
19.8mm (no retainer), the low profile is achieved.
■Applications
7. Production Facility Cost Reduction
Electronic equipment, office machines,
industrial equipment, and consumer
equipment, and so on
The female crimping contact uses the DF1B series crimping
contact, which has been conventionally marketed.
Investment for new facilities isn't needed. However, if the
retainer is installed in the cable with AWG#22 or more wire,
use the DF1E crimping contact. The female crimping
contact for in-line is used together with the DF1B applicator.
Therefore, no investment is needed for new facilities.
B146
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
DF1E Series●2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
■Products Specifications
Current rating Note 1.
AWG#20 to 24 :
3A
2A
26 :
28 :
Operating Temperature Range: -35 to +85ç Note 2.
Storage Temperature Range : -10 to +60ç Note 3.
Storage Moisture Range : -40 to 70% Note 3.
Rating
1A Operating Moisture Range : -40 to 80%
30 : 0.5A
Voltage rating 250VAC
■
UL/C-UL File No. and Recognition No.
C-UL Rating
UL :E52653
C-UL :E52653
AWG#20 to #22 : 3A
AWG#24 to #28 : 1A
Current rating
Voltage rating
Rating
AWG#30
30V AC
: 0.5A
Item
Specification
Condition
Measured at 20mV max. and 1mA
500V DC
1. Contact Resistance
2. Insulation Resistance
3. Withstanding voltage
4. Single Insertor/Extraction Forth
5. Durability (Mating/un-mating)
6. Vibration
30m ohms max.
1000M ohms min.
650V AC/1 minute
No flashover or insulation breakdown.
MIN 0.4N, MAX 4.4N
Measured at the square steel pin with 0.635 0.002
30 cycles
30m ohms max
No electrical discontinuity of 1μs or more
No electrical discontinuity of 1μs or more
30m ohms max
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
2
7. Shock
Acceleration of 490 m/s , 11 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis
8.
Humidity (Steady state)
96 hours at temperature of 40 2ç and humidity of 90ꢀ to 95ꢀ
9. Temperature Cycle
30m ohms max.
(-55ç: 30 minutes-> 5 to 35ç: 5 minutes-> 85ç: 30 minutes-> 5 to 35ç: 5 minutes) 5 cicles
10. Resistance to Soldering heat
Flow: 260ç for 10 seconds
No deformation of components affecting performance.
Manual soldering: 300ç for 3 seconds
Note 1: Current rating of header is 3A.
Note 2: Includes temperature rise caused by current flow.
Note 3: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Note 4: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a
specific part number shown.
■Material
Product
Part
Material
Polyamide
Polyamide
Brass
Treatment
White
Remarks
UL94V-0
UL94V-0
–––––––
UL94V-0
UL94V-0
–––––––
Socket
Insulator
Insulator
Contact
Insulator
Insulator
Contact
Beige
Header
Tin-lead plated
White
In-line Plug
retainer
Polyamide
Polyamide
Phosphor copper
Black
Crimping contact
Tin plated
B147
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
DF1E Series●2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
■Ordering Information
●Pin Header
q Series Name : DF1E
w Hold Types (Note. 1)
e
Number of Contacts : 2 to 15 contacts
DF1E C - * P - 2.5 DSA
(note. 2)
q
w
e
r
t
y
r Connector Type
P : Pin Header
Standard Product
With Boss
Potting
With Boss
t Contact Pitch : 2.5mm
y Form type
C
Without Boss
G
Without Boss
DSA : Straight through hole
DS : Right Angle Type
Note 1 : The right angle pin header has no symbol.
Note 2 : The potting header has 2 to 10 contacts.
●Socket
q Series Name : DF1E
e Connector type
S: Socket
DF1E - * S - 2.5 C
w
Number of Contacts : 2 to 15 contacts
q
w
e
r
t
r Contact Pitch : 2.5mm
t Form Type
C : Crimping socket
●In-line Plug
q Series Name : DF1E
w In-line Plug type
e Number of Contacts : 2 to 10 contacts
DF1E A - * EP - 2.5 C
r EP : In-line plug
t Contact Pitch : 2.5mm
y Form Type
q
w
e
r
t
y
Blank: With Panel mount Lock
A : Without Panel mount Lock
C : Crimping socket
●Crimping Contact
q Series Name :
w Applicable Cable Size
2022 : AWG#20 to #22
2428 : WG#24 to #28
DF1E - ** SCF
Socket side
:
DF1B (Note 1)
DF1E (Note 1)
q
w
e
Plug side
: DF1E
30
: AWG#30
e Packaging Type
SCF : Female contact : Reel
SC
: Female contact : Bag
PCF : Male contact : Reel
PC : Male contact : Bag
Note 1 : When the retainer is used, use DF1E-2022SC(F), DF1B-
2428SC(F), and DF1B-30SC(F) contacts.
Note 1 : When no retainer is used, all DF1B-**SC(F) and DF1E-
2022SC(F) contacts can be used.
●Retainer
q Series Name : DF1E
e Connector Type
DF1E - * RS/P - 2.5
w
Number of Contacts : 2 to 10 contacts
RS/P : Retainer
q
w
e
r
Commonly used for socket and in-line plug
r Contacts Pitch:2.5mm
B148
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
DF1E Series●2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
■Application Pattern
Socket
Retainer
Photo : Contact Inserted
Pin Header
In-line Plug
●Straight Type
●
In-line Plug (Panel Mount Lock Type)
Photo: Contact Inserted
●Straight Potting Type
●In-line Plug
Photo: Contact Inserted
●Right Angle Type
B149
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
DF1E Series●2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
■Right Angle Pin Header
Contact
Mold Cavity
5.4
10
No. mark No. mark
A
M
0.64
=
P
2.5
A
B
Contact
No.1 indicated
Note 2
Part Number
CL No.
Number of Contacts
A
B
RoHS
[Specific No.] –* *, (* *)
(01): Gold plated
(05): Tin plated
DF1E –02P–2.5DS(**)
DF1E –03P–2.5DS(**)
DF1E –04P–2.5DS(**)
DF1E –05P–2.5DS(**)
DF1E –06P–2.5DS(**)
DF1E –07P–2.5DS(**)
DF1E –08P–2.5DS(**)
DF1E –09P–2.5DS(**)
DF1E –10P–2.5DS(**)
DF1E –11P–2.5DS(**)
DF1E –12P–2.5DS(**)
DF1E –13P–2.5DS(**)
DF1E –14P–2.5DS(**)
DF1E –15P–2.5DS(**)
541 – 0985– 0 –**
541 – 0986– 3 –**
541 – 0987– 6 –**
541 – 0988– 9 –**
541 – 0989– 1 –**
541 – 0990– 0 –**
541 – 0991– 3 –**
541 – 0992– 6 –**
541 – 0993– 9 –**
541 – 0994– 1 –**
541 – 0995– 4 –**
541 – 0996– 7 –**
541 – 0997– 0 –**
541 – 0998– 2 –**
2
3
02.5
05.0
07.5
10.0
12.5
15.0
17.5
20.0
22.5
25.0
27.5
30.0
32.5
35.0
07.5
10.0
12.5
15.0
17.5
20.0
22.5
25.0
27.5
30.0
32.5
35.0
37.5
40.0
4
5
6
7
8
Yes
9
10
11
12
13
14
15
Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity
for delivery will be changed according to the Specific No.
Note 2. : The 2 to 4 contacts differ in two convex portions from those in above figures. The 2 and 3 contacts are not contained, but the 4
contact connector is contained in the center at one point.
Note 3. : Styles of 2 to 4 contact connectors partially differ from those in above figures.
BPCB mounting pattern (Board Thickness t = 1.6 0.1)
A
0.1
P =
2.5 0.05
B150
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
DF1E Series●2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
5.4
Contact
Mold Cavity
■Straight Pin Header
No. mark No. mark
10
A
P=2.5
A
B
Contact
No.1 indicated
M
0.64
Note 2
Part Number
CL No.
Number of Contacts
A
B
RoHS
[Specific No.] –* *, (* *)
(01): Gold plated
(05): Tin plated
DF1EC–02P–2.5DSA(**)
DF1EC–03P–2.5DSA(**)
DF1EC–04P–2.5DSA(**)
DF1EC–05P–2.5DSA(**)
DF1EC–06P–2.5DSA(**)
DF1EC–07P–2.5DSA(**)
DF1EC–08P–2.5DSA(**)
DF1EC–09P–2.5DSA(**)
DF1EC–10P–2.5DSA(**)
DF1EC–11P–2.5DSA(**)
DF1EC–12P–2.5DSA(**)
DF1EC–13P–2.5DSA(**)
DF1EC–14P–2.5DSA(**)
DF1EC–15P–2.5DSA(**)
541– 0867– 4 –**
541– 0868– 7 –**
541– 0869– 0 –**
541– 0870– 9 –**
541– 0871– 1 –**
541– 0872– 4 –**
541– 0873– 7 –**
541– 0874– 0 –**
541– 0875– 2 –**
541– 0876– 5 –**
541– 0877– 8 –**
541– 0878– 0 –**
541– 0879– 3 –**
541– 0880– 2 –**
2
3
02.5
05.0
07.5
10.0
12.5
15.0
17.5
20.0
22.5
25.0
27.5
30.0
32.5
35.0
07.5
10.0
12.5
15.0
17.5
20.0
22.5
25.0
27.5
30.0
32.5
35.0
37.5
40.0
4
5
6
7
8
Yes
9
10
11
12
13
14
15
Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity
for delivery will be changed according to the Specific No.
Note 2. : The 2 to 4 contacts differ in two convex portions from those in above figures. The 2 and 3 contacts are not contained, but the 2
and 3 contacts are not contained, and 4 contact is in the center at one point.
Note 3. : Styles of 2 to 4 contacts partially differ from those in above figures.
BPCB mounting pattern (Board Thickness t = 1.6 0.1)
A
0.1
P =
2.5 0.05
B151
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
DF1E Series●2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
5.4
Contact
Mold Cavity
No. mark No. mark
■Straight Pin Header for Potting
A
10
P=2.5
A
B
Contact
No.1 indicated
M
0.64
Note 2
Note 2
Part Number
CL No.
Number of Contacts
A
B
C
RoHS
[Specific No.] –* *, (* *)
(05): Tin plated
DF1EG –02P–2.5DSA(**)
DF1EG –03P–2.5DSA(**)
DF1EG –04P–2.5DSA(**)
DF1EG –05P–2.5DSA(**)
DF1EG –06P–2.5DSA(**)
DF1EG –07P–2.5DSA(**)
DF1EG –08P–2.5DSA(**)
DF1EG –09P–2.5DSA(**)
DF1EG –10P–2.5DSA(**)
DF1EG –11P–2.5DSA(**)
541 – 0923 – 3**
541 – 0924 – 6**
541 – 0925 – 9**
541 – 0926 – 1**
541 – 0927 – 4**
541 – 0928 – 7**
541 – 0929 – 0**
541 – 0930 – 9**
541 – 0931 – 1**
541 – 0932 – 4**
2
3
02.5
05.0
07.5
10.0
12.5
15.0
17.5
20.0
22.5
25.0
07.5
10.0
12.5
15.0
17.5
20.0
22.5
25.0
27.5
30.0
8.0
8.0
8.0
7.8
7.8
7.8
7.8
7.8
7.8
7.8
4
5
6
Yes
7
8
9
10
11
Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the product per bag. However, the quantity
for delivery will be changed according to spec number.
Note 2. : The 2 to 6 and 9 to 10 contact connectors differ in two convex portions from those in above figures. The 2 to 5 and 9 to 10
contacts are not contained, but the 6 contact is bonded to the convex portion at both ends.
Note 3. : Styles of 2 to 4 contact may partially differ from the above figures.
BPCB mounting pattern (Board Thickness t = 1.6 0.1)
A
0.1
P =
2.5 0.05
B152
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
DF1E Series●2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
2.8
A
B
2.8
■In-line Plug (Panel Mount Lock Type)
Mold Cavity
2.5
=
P
No. mark
Contact No. mark
10
A
Contact
No.1 indicated
C
10
9
7
5
3
1
Contact
No. mark
Contact
No. mark
Note 2
Photo: Contact Inserted.
Note 3
Part Number
CL No.
Number of Contacts
A
B
C
D
E
RoHS
DF1E–02EP–2.5C
DF1E–03EP–2.5C
DF1E–04EP–2.5C
DF1E–05EP–2.5C
DF1E–06EP–2.5C
DF1E–07EP–2.5C
DF1E–08EP–2.5C
DF1E–09EP–2.5C
DF1E–10EP–2.5C
541– 0943– 0
541– 0944– 3
541– 0945– 6
541– 0946– 9
541– 0947– 1
541– 0948– 4
541– 0949– 7
541– 0950– 6
541– 0951– 9
2
3
8.0
2.5
5.0
7.5
15.0
17.5
20.0
22.5
25.0
27.5
30.0
32.5
35.0
8.4
11.9
14.4
16.9
19.4
21.9
24.4
26.9
29.4
31.9
10.5
13.0
15.5
18.0
20.5
23.0
25.5
28.0
10.9
13.4
15.9
18.4
20.9
23.4
25.9
28.4
4
5
10.0
12.5
15.0
17.5
20.0
22.5
6
Yes
7
8
9
10
Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity
for delivery will be changed according to the Specific No.
Note 2. : In regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends.
Note 3. In regard to 2 to 7 contacts, 2 convex portions are different from those in the above figures.
Note 4. Use the no radius side at the panel edge in the looking area.
Note 5. : Panel fixation is loosened. (May be enlarged according to the panel board thickness.)
Note 6. : Styles of 2 to 4 contact partially differ from those in the above figures.
* Refer to page B156 for the retainer.
BPanel Cutout
+0.1
( E + X )
0
+0.1
D
0
5.8 +0.2
0
Panel Thickness
1.7 to 2.0
1.3 to 1.6
0.9 to 1.2
0.7 to 0.8
X
1.5
Panel
1.0
0.5
0.0
Note 4
B153
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
DF1E Series●2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
■In-line Plug
A
B
=
P
2.5
Mold Cavity
No. mark
Contact No. mark
A
10
Contact
No.1 indicated
Photo: Contact Inserted
10
9
7
5
3
1
Contact
No. mark
Contact
No. mark
Note 2
Note 3
Part Number
CL No.
Number of Contacts
A
B
RoHS
DF1EA –02EP–2.5C
DF1EA –03EP–2.5C
DF1EA –04EP–2.5C
DF1EA –05EP–2.5C
DF1EA –06EP–2.5C
DF1EA –07EP–2.5C
DF1EA –08EP–2.5C
DF1EA –09EP–2.5C
DF1EA –10EP–2.5C
541 – 0957 – 5
541 – 0958 – 8
541 – 0959 – 0
541 – 0960 – 0
541 – 0961 – 2
541 – 0962 – 5
541 – 0963 – 8
541 – 0964 – 0
541 – 0965 – 3
2
3
08.0
10.5
13.0
15.5
18.0
20.5
23.0
25.5
28.0
02.5
05.0
07.5
10.0
12.5
15.0
17.5
20.0
22.5
4
5
6
Yes
7
8
9
10
Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity
for delivery will be changed according to the Specific No.
Note 2. : In regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends.
Note 3. : 2 to 7 contacts do not contain two convex portions, which is different from the above figure.
Note 4. : Styles of 2 to 4 contacts partially differ from the above figures.
* Refer to page B156 for retainer.
B154
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
DF1E Series●2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
■Socket
=
P
2.5
A
B
C
Note 2
10
1
Photo: Contact Inserted
Contact
No.1 indicated
Contact
No. mark
7.55
Mold Cavity
No. mark
Note 3
Note 3
Note 4
Note 4
Part Number
CL No.
Number of Contacts
A
B
C
RoHS
DF1E –02S–2.5C
DF1E –03S–2.5C
DF1E –04S–2.5C
DF1E –05S–2.5C
DF1E –06S–2.5C
DF1E –07S–2.5C
DF1E –08S–2.5C
DF1E –09S–2.5C
DF1E –10S–2.5C
DF1E –11S–2.5C
DF1E –12S–2.5C
DF1E –13S–2.5C
DF1E –14S–2.5C
DF1E –15S–2.5C
541 – 0811 – 0
541 – 0812 – 2
541 – 0813 – 5
541 – 0814 – 8
541 – 0815 – 0
541 – 0816 – 3
541 – 0817 – 6
541 – 0818 – 9
541 – 0819 – 1
541 – 0820 – 0
541 – 0821 – 3
541 – 0822 – 6
541 – 0823 – 9
541 – 0824 – 1
2
3
02.5
05.0
07.5
10.0
12.5
15.0
17.5
20.0
22.5
25.0
27.5
30.0
32.5
35.0
08.0
10.5
13.0
15.5
18.0
20.5
23.0
25.5
28.0
30.5
33.0
35.5
38.0
40.5
05.4
07.9
10.4
12.9
15.4
17.9
20.4
22.9
25.4
27.9
30.4
32.9
35.4
37.9
4
5
6
7
8
Yes
9
10
11
12
13
14
15
Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity
for delivery will be changed according to spec number.
Note 2. : The 2 contact connector is equipped with the convex portion to prevent false-insertion.
Note 3. : The 2 consult Has no wall on the locking side
Note 4. : The 2 to 5 contacts contain the retainer fixed convex portions at both ends.
* Refer to page B156 for the retainer.
B155
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
DF1E Series●2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
■Retainer
A
1.9
B
1.7
0.7
P = 2.5
Note2
Note2
Contact No. mark
1 0
A
Mold Cavity
No. mark
Part Number
CL No.
Number of Contacts
A
B
RoHS
DF1E –02RS/P–2.5
DF1E –03RS/P–2.5
DF1E –04RS/P–2.5
DF1E –05RS/P–2.5
DF1E –06RS/P–2.5
DF1E –07RS/P–2.5
DF1E –08RS/P–2.5
DF1E –09RS/P–2.5
DF1E –10RS/P–2.5
541 – 0971 – 6
541 – 0972 – 9
541 – 0973 – 1
541 – 0974 – 4
541 – 0975 – 7
541 – 0976 – 0
541 – 0977 – 2
541 – 0978 – 5
541 – 0979 – 8
2
3
08.0
10.5
13.0
15.5
18.0
20.5
23.0
25.5
28.0
02.5
05.0
07.5
10.0
12.5
15.0
17.5
20.0
22.5
4
5
6
Yes
7
8
9
10
Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity
for delivery will be changed according to spec number.
Note 2. : The 2 to 4 contacts contain socket and plug fixed holes at both ends.
* This retainer can be used together with the socket and relay plug.
B156
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
DF1E Series●2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
■Plug Crimping Contact
0.68
0.64
●Applicable Cable (Tin plating annealed copper wire)
●Recommended Cable
UL1061, UL1007
Conductor Size (Wire construction)
AWG # 20 (21 cores./0.18mm)
AWG # 22 (17 cores./0.16mm)
AWG # 24 (11 cores./0.16mm)
AWG # 26 (07 cores./0.16mm)
AWG # 28 (07 cores./0.127mm)
AWG # 30 (07 cores./0.1mm)
●Strip Length
3.0 to 3.7mm
Note : If other cables are used instead of the applicable
cable, contact Hirose sales department.
Applicable Cable
Applicable
Cable Indication
Packaging
Type
Part Number
CL No.
Quantity
RoHS
Yes
AWG
Jacket Diameter
Reel
Bag
Reel
Bag
Reel
Bag
10,000
100
DF1E – 2022PCF
DF1E – 2022PC
DF1E – 2428PCF
DF1E – 2428PC
DF1E – 30PCF
DF1E – 30PC
541 – 0937 – 8
541 – 0938 – 0
541 – 0939 – 3
541 – 0940 – 2
541 – 0941 – 5
541 – 0942 – 8
20
22
AWG # 20
AWG # 22
1.2 to 1.9mm
10,000
100
24
28
AWG # 24
AWG # 28
0.9 to 1.5mm
0.6 to 1.2mm
10,000
100
30
AWG # 30
● Crimping Contact Extraction Tool DF-C-PO(B)
B157
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
DF1E Series●2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
■Socket Crimping Contact
●DF1E-2022SCF
●DF1B - * * * * SCF
1.75
0.975
1.75
1.95
1.4
Applicable cable indicated
0.83
1.95
Applicable cable indicated
0.55
●Applicable Cable (Tin plating annealed copper wire)
●Recommended Cable
UL1061, UL1007
Conductor Size (Wire construction)
AWG # 20 (21 cores./0.18mm)
AWG # 22 (17 cores./0.16mm)
AWG # 24 (11 cores./0.16mm)
AWG # 26 (07 cores./0.16mm)
AWG # 28 (07 cores./0.127mm)
AWG # 30 (07 cores./0.1mm)
●Strip Length
2.0mm to 2.5mm
Note : If other cables are used instead of the applicable
cable, consult Hirose sales department.
Applicable Cable
Applicable
Cable Indication
Packaging
Type
Part Number
CL No.
Quantity
RoHS
AWG
Jacket Diameter
Reel
Bag
Reel
Bag
Reel
Bag
Reel
Bag
10,000
100
DF1E – 2022SCF
DF1E – 2022SC
DF1B – 2022SCF
DF1B – 2022SC
DF1B – 2428SCF
DF1B – 2428SC
DF1B – 30SCF
DF1B – 30SC
541 – 0999 – 5
541 – 1000 – 2
541 – 0223 – 1
541 – 0224 – 4
541 – 0678 – 1
541 – 0679 – 4
541 – 0682 – 9
541 – 0683 – 1
20
22
AWG # 20
AWG # 22
1.2 to 1.9mm
10,000
100
20
22
AWG # 20
AWG # 22
1.2 to 1.9mm
0.9 to 1.5mm
0.6 to 1.2mm
Yes
10,000
100
24
28
AWG # 24
AWG # 28
10,000
100
30
AWG # 30
● Crimping Contact Extraction Tool DF-C-PO(B)
B158
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
DF1E Series●2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
BCrimping Tools
Item
Part Number
AP105 – DF1E – 2022S
AP105 – DF1B – 2022S
AP105 – DF1B – 2428S
AP105 – DF1B – 30S
AP105 – DF1B – 2022P
AP105 – DF1B – 2428P
AP105 – DF1B – 30P
CM – 105
CL No.
Applicable Contact
DF1E – 2022SCF
DF1B – 2022SCF
DF1B – 2428SCF
DF1B – 30SCF
DF1E – 2022PCF
DF1E – 2428PCF
DF1E – 30PCF
––––––
901 – 4561 – 0
901 – 4510 – 9
901 – 4518 – 0
901 – 4517 – 8
901 – 4509 – 0
901 – 4521 – 5
901 – 4519 – 3
901 – 0005 – 4
550 – 0277 – 1
550 – 0182 – 7
550 – 0209 – 1
550 – 0211 – 3
550 – 0278 – 4
550 – 0279 – 7
550 – 0280 – 6
K
K
K
K
K
K
Applicator
K
K
K
K
K
K
K
K
Main Press Unit
Manual Crimping Tool
HT102/DF1E – 2022S
DF1B – TA2022SHC
DF1B – TA2428SHC
DF1B – TA30SHC
DF1E – 2022SC
DF1B – 2022SC
DF1B – 2428SC
DF1B – 30SC
K
K
K
K
K
K
HT102/DF1BE – 2022P
HT102/DF1BE – 2428P
HT102/DF1BE – 30P
DF1E – 2022PC
DF1E – 2428PC
DF1E – 30PCF
DF1E – 2022SC (F)
Contact Extraction Tool
DF – C – PO (B)
550 – 0179 – 2
DF1B – * * * * SC (F)
DF1E – * * * * PC (F)
K
Note 1. : Add "K" to the last number of the product, in order to use DF1B series tools, which have been conventionally merchandized.
Note 2. : If any trouble has occurred due to other tools, which are not designated by Hirose, Hirose won't guarantee any products.
B159
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
DF1E Series●2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
BApplication Pattern
●Standard Header
8.5
DF1E _ * S _ 2.5 C
DF1E _ * RS / P _ 2.5
18.8
17.3
DF1E# _ * P _ 2.5 DSA
DF1E _ * P _ 2.5 DS (**)
DF1E _ * RS / P _ 2.5
DF1E _ * S _ 2.5 C
10.8
14.3
3.7
3
●Header for Potting
8
DF1E _ * S _ 2.5 C
DF1E _ * RS / P _ 2.5
Potting Resin
3.2
DF1E# _ * P _ 2.5 DSA
●Panel Mounting Lock In-line Plug
●In-line Plug
25.3
17
25.3
DF1E _ * RS / P _ 2.5
DF1E _ * RS / P _ 2.5
DF1E _ * RS / P _ 2.5
DF1E _ * RS / P _ 2.5
DF1E _ * EP _ 2.5 C
DF1E _ * S _ 2.5 C
DF1E _ * S _ 2.5 C
DF1EA _ * EP _ 2.5 C
22.3
15.5
22.3
B160
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
DF1E Series●2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
BPrecautions
1. Recommended Soldering Condition
Flow: 260ç for 10 seconds
Manual soldering: 300ç for 3 seconds
2. Cleaning Condition
Refer to Nylon Connector Use Hand book.
However, if the connector is cleaned by the potting header, the detergent remains within the
connector, which will cause malfunction.
3. Connection Condition
4. Cautions
Refer to Nylon Connector Use Hand book.
● To remove the connector, if the connector is forcedly removed, it will cause connector
damage. If the connector is hardly removed, slightly push the connector once, and then
remove it using the lock.
● In some method for laying the cable within equipment, a tension may be applied to the
cable so as to remove the contact. In this case, it is recommended to use the retainer.
● Incomplete insertion of the contact can be prevented by mounting a retainer; however,
mounting of a retainer might not be possible when the contact protrudes beyond the
socket. Insert the contact securely and then mount the retainer.
● If the potting process is implemented, it is desirable to fill the connector with resin,
considering the resin surface tensile force.
● The color phase of this product may be slightly different from that of the forming product
according to the manufacturing lot and future storage conditions, however the difference
doesn't affect the performance.
5. Precautions
Refer to Nylon Connector Use Hand book.
B161
相关型号:
DF1E-3P-2.5DS(05)
Board Connector, 3 Contact(s), 1 Row(s), Male, Right Angle, 0.098 inch Pitch, Solder Terminal, Locking, Beige Insulator, ROHS COMPLIANT
HRS
DF1E-3P-2.5DS(35)
Board Connector, 3 Contact(s), 1 Row(s), Male, Right Angle, 0.098 inch Pitch, Solder Terminal, Locking, Beige Insulator
HRS
DF1E-3P-2.5DS(36)
Board Connector, 3 Contact(s), 1 Row(s), Male, Right Angle, 0.098 inch Pitch, Solder Terminal, Locking, Beige Insulator
HRS
DF1E-3S-2.5C
Board Connector, 3 Contact(s), 1 Row(s), Female, 0.098 inch Pitch, Crimp Terminal, Latch, White Insulator, Socket, ROHS COMPLIANT
HRS
DF1E-4EP-2.5C
Board Connector, 4 Contact(s), 1 Row(s), Male, 0.098 inch Pitch, Crimp Terminal, Locking, White Insulator, Plug, ROHS COMPLIANT
HRS
DF1E-4P-2.5DS
Board Connector, 4 Contact(s), 1 Row(s), Male, Right Angle, 0.098 inch Pitch, Solder Terminal, Locking, Beige Insulator, Receptacle
HRS
©2020 ICPDF网 联系我们和版权申明