DF1EG-8P-2.5DSA(00) [HRS]
Board Connector, 8 Contact(s), 1 Row(s), Male, Straight, Solder Terminal,;型号: | DF1EG-8P-2.5DSA(00) |
厂家: | HRS |
描述: | Board Connector, 8 Contact(s), 1 Row(s), Male, Straight, Solder Terminal, |
文件: | 总16页 (文件大小:293K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
2.5mm Pitch connector for full lock and discrete wire connection
DF1E Series
Full lock function
added
Inner-lock system
full lock mechanism
Mis-insertion
prevention
ꢀFeatures
1. Full lock function added
Double lock
engaged
The inner lock system adopts a full lock mechanism.
This mechanism prevents disengagement to occur due to
an unexpected external shock.
Double lock
engaged
2. Increase in crimping contact fixation force and
semi-insertion prevention
The double lock is activated for the use method to give a
stress to the cable, to increase crimping contact fixation
force, and to prevent the semi-insertion of the crimping
contact.
3. Mold lance adopted
Since the contact lance may be deformed involving in the
contact after the crimping process, the mold lance has been
adopted.
4. Mis-insertion prevention
Equipped with the mechanism to completely prevent reverse
insertion and insertion between dissimilar contacts.
8. Correspond to automatic insertion machine
5. Means to prevent solder crack
The radial tape packaging is provided for 2 to
8 contacts on the straight pin header side, in
order to correspond to mass production.
The glass enforcement resin is adopted for the pin header to
prevent a solder crack to occur due to heat compression.
6. Correspond to potting
9. Various applications
Corresponding to potting, the pin header is provided for
product variations.
Corresponding to potting up to 8mm and mounting height
19.8mm (no retainer), the low profile is achieved.
With the same series, various applications can
be used for the board solder dip type and in-
line.
7. Production facility cost reduction
ꢀApplications
The female crimping contact uses the DF1B series crimping
contact, which has been conventionally marketed.
Investment for new facilities isn't needed. However, if the
retainer is installed in the cable with AWG#22 or more wire,
use the DF1E crimping contact. The female crimping
contact for in-line is used together with the DF1B applicator.
Therefore, no investment is needed for new facilities.
Electronic equipment, office machines,
industrial equipment, and consumer
equipment, and so on
1
ꢀProducts specifications
Rated current note 1.
AWG#20~24 :
3A
2A
1A
26 :
28 :
Operating temperature range -35~+85ç Note 2.
Storage temperature range -10~+60ç note 3.
Storage moisture range -40~70%
Rating
O
perating moisture range -40~80%
30 : 0.5A
Rated voltage AC250V
Item
Specification
Condition
1. Contact resistance
2. Insulation resistance
3. Withstand voltage
4. Single insertion/extraction force
5. Operating life
30mø max.
Measured at 20mV max. and 1mA
1000Mø min.
Measured at 500V DC
Neither short or breakdown
MIN 0.4N, MAX 4.4N
30mø max
150V AC energized for 1 minute
Measured at the square steel pin with 0.635± 0.002
30 cycles of insertions/extractions
6. Vibration
Electrical discontinuity, 1µS max.
Electrical discontinuity, 1µS max.
30mø max
10~55Hz and single amplitude 0.75mm in 3 directions for 2 hours, respectively.
490m/s and 11ms, sin/cosine 3 directions, 3 times, respectively
Exposed to temperature 40± ±çꢀand humidity 90~95% for 96 hours
(-55ç: 30 minutes-> 5~35ç: 5 minutes-> 85ç: 30 minutes-> 5~35ç: 5 minutes) 5 cicles
7. Shock
8. Moisture resistance
9. Temperature cycle
10. Resistance to soldering heat
30mø max.
Neither deformation on the appearance nor remarkable contact backlash is found. Reflow: 250ç: 20 seconds
Manual soldering: soldering iron temperature: 300
ç
for 3 seconds
Note 1 : Temperature rise included when energized
Note 2 : This storage indicates a long-term storage state for the unused product before the board mounted.
The operating temperature and moisture ranges are applied to the non-energized state after the connector has been installed to the board.
Note 3 : The above standards represent this series. Individual formal agreement should be based on the "Specification".
ꢀMaterial
Product
Part
Material
Polyamide
Polyamide
Brass
Treatment
White
Remarks
UL94V-0
UL94V-0
–––––––
UL94V-0
UL94V-0
–––––––
Socket
Insulator
Insulator
Contact
Insulator
Insulator
Contact
Beige
Header
Solder plating
White
In-line Plug
retainer
Polyamide
Polyamide
Phosphor copper
Black
Crimping contact
Tin plating
Note : The whisker method is implemented for HRS tin plating.
2
ꢀOrdering information
ꢀPin header
q Series name : DF
w Series No. : 1E
r
t
Number of Contacts : 2 to 15 contacts
Connector Type
DF 1E C - π P - 2.5 DSA
q
w
e
r
t
y
u
e
Hold Types
P : Pin Header
y Contact Pitch : 2.5mm
u Form type
Standard Product
With Boss
Potting
With Boss
Without Boss
DSA : Straight Dip
DS : Right Angle Type
C
Without Boss
G
Note 1 : The right angle pin header has no symbol.
Note 2 : The potting header has 2 to 10 contacts.
ꢀSocket
q Series name : DF
w Series No. : 1E
r
t
Connector type
S: Socket
DF 1E - π S - 2.5 C
q
w
e
r
t
y
e
Number of Contacts : 2 to 15 contacts
Contact Pitch : 2.5mm
y Form Type
C : Crimping socket
ꢀIn-line plug
q Series name : DF
w Series No. : 1E
r
t
Number of Contacts : 2 to 10 contacts
DF 1E A - π EP - 2.5 C
EP : In-line plug
q
w
e
r
t
y
u
e
In-line Plug type
y Contact Pitch : 2.5mm
u Form Type
None: With Panel mount Lock
A : Without Panel mount Lock
C : Crimping socket
ꢀCrimping contact
q Series name : DF
w Series No.
e
r
Applicable Cable Size
2022 : AWG#20~#22
2428 : WG#24~#28
DF 1E - ππ SCF
:
q
w
e
r
Socket side : 1B (Note 1)
1E (Note 1)
30
: AWG#30
Plug side
: 1E
Packaging Type
SCF : Female contact : Reel
SF
: Female contact : Bag
PCF : Male contact : Reel
PC : Male contact : Bag
Note 1 : When the retainer is used, use DF1E-2022SC(F), DF1B-
2428SC(F), and DF1B-30SC(F) contacts.
Note 1 : When no retainer is used, all DF1B-ππSC(F) and DF1E-
2022SC(F) contacts can be used.
ꢀRetainer
q Series name : DF
w Series No. : 1E
r
t
Connector Type
DF 1E - π RS/P - 2.5
RS/P : Retainer
q
w
e
r
t
e
Number of Contacts : 2 to 10 contacts
Commonly used for socket and in-line plug
Contacts Pitch:2.5mm
3
ꢀApplication pattern
Socket
Retainer
Photo : Contact Inserted
Pin header
Relay plug
ꢀStraight type
ꢀIn-line plug (panel mount lock type)
Photo: contact Inserted
ꢀIn-line plug
ꢀStraight potting type
Photo: contact Inserted
ꢀRight angle type
4
ꢀRight angle pin header
5.4
MoldꢀCavityꢀ
No.ꢀmark
ContactꢀNo.ꢀmark
A
ꢁ0
M
0.64
±.5
Pꢀ=
A
B
ContactꢀNo.ꢁꢀindicated
Noteꢀ±
The symbol ππ included in
HRS No. and the product spec
No. indicates the Specific No.
Product No.
HRS No.
Number of Contacts
A
B
DFꢁEꢀ–0±P–±.5DS(ππ)
DFꢁEꢀ–03P–±.5DS(ππ)
DFꢁEꢀ–04P–±.5DS(ππ)
DFꢁEꢀ–05P–±.5DS(ππ)
DFꢁEꢀ–06P–±.5DS(ππ)
DFꢁEꢀ–07P–±.5DS(ππ)
DFꢁEꢀ–08P–±.5DS(ππ)
DFꢁEꢀ–09P–±.5DS(ππ)
DFꢁEꢀ–ꢁ0P–±.5DS(ππ)
DFꢁEꢀ–ꢁꢁP–±.5DS(ππ)
DFꢁEꢀ–ꢁ±P–±.5DS(ππ)
DFꢁEꢀ–ꢁ3P–±.5DS(ππ)
DFꢁEꢀ–ꢁ4P–±.5DS(ππ)
DFꢁEꢀ–ꢁ5P–±.5DS(ππ)
CL54ꢁꢀ–ꢀ0985–ꢀ0ꢀ–ππ
CL54ꢁꢀ–ꢀ0986–ꢀ3ꢀ–ππ
CL54ꢁꢀ–ꢀ0987–ꢀ6ꢀ–ππ
CL54ꢁꢀ–ꢀ0988–ꢀ9ꢀ–ππ
CL54ꢁꢀ–ꢀ0989–ꢀꢁꢀ–ππ
CL54ꢁꢀ–ꢀ0990–ꢀ0ꢀ–ππ
CL54ꢁꢀ–ꢀ099ꢁ–ꢀ3ꢀ–ππ
CL54ꢁꢀ–ꢀ099±–ꢀ6ꢀ–ππ
CL54ꢁꢀ–ꢀ0993–ꢀ9ꢀ–ππ
CL54ꢁꢀ–ꢀ0994–ꢀꢁꢀ–ππ
CL54ꢁꢀ–ꢀ0995–ꢀ4ꢀ–ππ
CL54ꢁꢀ–ꢀ0996–ꢀ7ꢀ–ππ
CL54ꢁꢀ–ꢀ0997–ꢀ0ꢀ–ππ
CL54ꢁꢀ–ꢀ0998–ꢀ±ꢀ–ππ
±
3
0±.5
05.0
07.5
ꢁ0.0
ꢁ±.5
ꢁ5.0
ꢁ7.5
±0.0
±±.5
±5.0
±7.5
30.0
3±.5
35.0
07.5
ꢁ0.0
ꢁ±.5
ꢁ5.0
ꢁ7.5
±0.0
±±.5
±5.0
±7.5
30.0
3±.5
35.0
37.5
40.0
4
5
6
7
8
9
ꢁ0
ꢁꢁ
ꢁ±
ꢁ3
ꢁ4
ꢁ5
Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity
for delivery will be changed according to the Specific No.
Note 2. : The 2 to 4 contacts differ in two convex portions from those in above figures. The 2 and 3 contacts are not contained, but the 4
contact connector is contained in the center at one point.
Note 3. : Styles of 2 to 4 contact connectors partially differ from those in above figures.
BPCB footprints (board thickness t = 1.6 ± ꢀ0.1)
A± 0.ꢁ
Pꢀ=
±.5± 0.05
5
5.4
ꢀStraight pin header
MoldꢀCavityꢀ
No.ꢀmark
ContactꢀNo.ꢀmark
A
ꢁ0
Pꢀ=
±.5
A
B
ContactꢀNo.ꢁꢀindicated
M
0.64
Noteꢀ±
The symbol ππ included in
HRS No. and the product spec
No. indicates the Specific No.
Product No.
HRS No.
Number of Contacts
A
B
DFꢁEC–0±P–±.5DSA(ππ)
DFꢁEC–03P–±.5DSA(ππ)
DFꢁEC–04P–±.5DSA(ππ)
DFꢁEC–05P–±.5DSA(ππ)
DFꢁEC–06P–±.5DSA(ππ)
DFꢁEC–07P–±.5DSA(ππ)
DFꢁEC–08P–±.5DSA(ππ)
DFꢁEC–09P–±.5DSA(ππ)
DFꢁEC–ꢁ0P–±.5DSA(ππ)
DFꢁEC–ꢁꢁP–±.5DSA(ππ)
DFꢁEC–ꢁ±P–±.5DSA(ππ)
DFꢁEC–ꢁ3P–±.5DSA(ππ)
DFꢁEC–ꢁ4P–±.5DSA(ππ)
DFꢁEC–ꢁ5P–±.5DSA(ππ)
CL54ꢁ–ꢀ0867–ꢀ4ꢀ–ππ
CL54ꢁ–ꢀ0868–ꢀ7ꢀ–ππ
CL54ꢁ–ꢀ0869–ꢀ0ꢀ–ππ
CL54ꢁ–ꢀ0870–ꢀ9ꢀ–ππ
CL54ꢁ–ꢀ087ꢁ–ꢀꢁꢀ–ππ
CL54ꢁ–ꢀ087±–ꢀ4ꢀ–ππ
CL54ꢁ–ꢀ0873–ꢀ7ꢀ–ππ
CL54ꢁ–ꢀ0874–ꢀ0ꢀ–ππ
CL54ꢁ–ꢀ0875–ꢀ±ꢀ–ππ
CL54ꢁ–ꢀ0876–ꢀ5ꢀ–ππ
CL54ꢁ–ꢀ0877–ꢀ8ꢀ–ππ
CL54ꢁ–ꢀ0878–ꢀ0ꢀ–ππ
CL54ꢁ–ꢀ0879–ꢀ3ꢀ–ππ
CL54ꢁ–ꢀ0880–ꢀ±ꢀ–ππ
±
3
0±.5
05.0
07.5
ꢁ0.0
ꢁ±.5
ꢁ5.0
ꢁ7.5
±0.0
±±.5
±5.0
±7.5
30.0
3±.5
35.0
07.5
ꢁ0.0
ꢁ±.5
ꢁ5.0
ꢁ7.5
±0.0
±±.5
±5.0
±7.5
30.0
3±.5
35.0
37.5
40.0
4
5
6
7
8
9
ꢁ0
ꢁꢁ
ꢁ±
ꢁ3
ꢁ4
ꢁ5
Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity
for delivery will be changed according to the Specific No.
Note 2. : The 2 to 4 contacts differ in two convex portions from those in above figures. The 2 and 3 contacts are not contained, but the 2
and 3 contacts are not contained, and 4 contact is in the center at one point.
Note 3. : Styles of 2 to 4 contacts partially differ from those in above figures.
Note 4. : The radial package is prepared for DF1EC-πP-2.5DSA(25).However, 2 to 8 contacts only are provided. (Quantity of packaged 2
and 3 contacts: 1000pcs., 4 to 8 contacts: 400pcs.)
BPCB footprints (board thickness t = 1.6 ± ꢀ0.1)
A± 0.ꢁ
Pꢀ=
±.5± 0.05
6
ꢀStraight pin header for potting
5.4
MoldꢀCavityꢀ
No.ꢀmark
ContactꢀNo.ꢀmark
A
ꢁ0
P= ±.5
A
B
ContactꢀNo.ꢁꢀindicated
M
0.64
Noteꢀ±
Noteꢀ±
The symbol ππ
included in HRS No.
and the product
spec No. indicates
the Specific No.
Product No.
HRS No.
Number of Contacts
A
B
C
DFꢁEGꢀ–0±P–±.5DSA(ππ)
DFꢁEGꢀ–03P–±.5DSA(ππ)
DFꢁEGꢀ–04P–±.5DSA(ππ)
DFꢁEGꢀ–05P–±.5DSA(ππ)
DFꢁEGꢀ–06P–±.5DSA(ππ)
DFꢁEGꢀ–07P–±.5DSA(ππ)
DFꢁEGꢀ–08P–±.5DSA(ππ)
DFꢁEGꢀ–09P–±.5DSA(ππ)
DFꢁEGꢀ–ꢁ0P–±.5DSA(ππ)
DFꢁEGꢀ–ꢁꢁP–±.5DSA(ππ)
CL54ꢁꢀ–ꢀ09±3ꢀ–ꢀ3ππ
CL54ꢁꢀ–ꢀ09±4ꢀ–ꢀ6ππ
CL54ꢁꢀ–ꢀ09±5ꢀ–ꢀ9ππ
CL54ꢁꢀ–ꢀ09±6ꢀ–ꢀꢁππ
CL54ꢁꢀ–ꢀ09±7ꢀ–ꢀ4ππ
CL54ꢁꢀ–ꢀ09±8ꢀ–ꢀ7ππ
CL54ꢁꢀ–ꢀ09±9ꢀ–ꢀ0ππ
CL54ꢁꢀ–ꢀ0930ꢀ–ꢀ9ππ
CL54ꢁꢀ–ꢀ093ꢁꢀ–ꢀꢁππ
CL54ꢁꢀ–ꢀ093±ꢀ–ꢀ4ππ
±
3
0±.5
05.0
07.5
ꢁ0.0
ꢁ±.5
ꢁ5.0
ꢁ7.5
±0.0
±±.5
±5.0
07.5
ꢁ0.0
ꢁ±.5
ꢁ5.0
ꢁ7.5
±0.0
±±.5
±5.0
±7.5
30.0
7.8
7.8
7.8
8.0
8.0
8.0
8.0
8.0
8.0
8.0
4
5
6
7
8
9
ꢁ0
ꢁꢁ
Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the product per bag. However, the quantity
for delivery will be changed according to spec number.
Note 2. : The 2 to 6 and 9 to 10 contact connectors differ in two convex portions from those in above figures. The 2 to 5 and 9 to 10
contacts are not contained, but the 6 contact is bonded to the convex portion at both ends.
Note 3. : Styles of 2 to 4 contact may partially differ from the above figures.
Note 4. : The radial tape packaging is prepared for DF1EG-πP-2.5DSA(25).However, 2 to 8 contacts are available. (Quantity of packaged
2 and 3 contacts : 1000pcs., 4 to 8 contacts: 400pcs.)
BPCB footprints (board thickness t = 1.6 ± ꢀ0.1)
A± 0.ꢁ
Pꢀ=
±.5± 0.05
7
ꢀIn-line plug (panel mount lock type)
A
B
±.8
±.8
Pꢀ=
±.5
MoldꢀCavityꢀ
No.ꢀmark
ContactꢀNo.ꢀmark
A
ꢁꢀꢀ0
C
ContactꢀNo.ꢁꢀindicated
ꢁ0
9
7
5
3
ꢁ
ContactꢀNo.ꢀindicated
Photo: contact inserted.
ContactꢀNo.ꢁꢀindicated
Noteꢀ±
Noteꢀ3
Product No.
HRS No.
Number of Contacts
A
B
C
D
E
DFꢁE–0±EP–±.5C(ππ)
DFꢁE–03EP–±.5C(ππ)
DFꢁE–04EP–±.5C(ππ)
DFꢁE–05EP–±.5C(ππ)
DFꢁE–06EP–±.5C(ππ)
DFꢁE–07EP–±.5C(ππ)
DFꢁE–08EP–±.5C(ππ)
DFꢁE–09EP–±.5C(ππ)
DFꢁE–ꢁ0EP–±.5C(ππ)
CL54ꢁ–ꢀ0943–ꢀ0ꢀ–ππ
CL54ꢁ–ꢀ0944–ꢀ3ꢀ–ππ
CL54ꢁ–ꢀ0945–ꢀ6ꢀ–ππ
CL54ꢁ–ꢀ0946–ꢀ9ꢀ–ππ
CL54ꢁ–ꢀ0947–ꢀꢁꢀ–ππ
CL54ꢁ–ꢀ0948–ꢀ4ꢀ–ππ
CL54ꢁ–ꢀ0949–ꢀ7ꢀ–ππ
CL54ꢁ–ꢀ0950–ꢀ6ꢀ–ππ
CL54ꢁ–ꢀ095ꢁ–ꢀ9ꢀ–ππ
±
3
8.0
±.5
ꢁ5.0
ꢁ7.5
±0.0
±±.5
±5.0
±7.5
30.0
3±.5
35.0
8.4
ꢁ±.5
ꢁ5.0
ꢁ7.5
±0.0
±±.5
±5.0
±7.5
30.0
3±.5
ꢁ0.5
ꢁ3.0
ꢁ5.5
ꢁ8.0
±0.5
±3.0
±5.5
±8.0
5.0
ꢁ0.9
ꢁ3.4
ꢁ5.9
ꢁ8.4
±0.9
±3.4
±5.9
±8.4
4
7.5
5
ꢁ0.0
ꢁ±.5
ꢁ5.0
ꢁ7.5
±0.0
±±.5
6
7
8
9
ꢁ0
The symbol ππ included in HRS No. and the product spec No. indicates the Specific No.
Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity
for delivery will be changed according to the Specific No.
Note 2. : In regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends.
Note 3. In regard to 2 to 7 contacts, 2 convex portions are different from those in the above figures.
Note 4. Use the no radius side at the panel edge in the looking area.
Note 5. : Panel fixation is loosened. (May be enlarged according to the panel board thickness.)
Note 6. : Styles of 2 to 4 contact partially differ from those in the above figures.
*ꢀRefer to page B122 for the retainer.
BPanel cut-outs
+0.ꢁ
(ꢀEꢀ+ꢀ
0
+0.ꢁ
D
0
5.8 +0.±
0
Panel Thickness
ꢁ.7~±.0
X
1.5
Panel
1.0
0.5
0.0
ꢁ.3~ꢁ.6
Noteꢀ4
0.9~ꢁ.±
0.7~0.8
8
ꢀIn-line plug
A
B
Pꢀ=
±.5
MoldꢀCavityꢀ
No.ꢀmark
ContactꢀNo.ꢀmark
A
1 0
ContactꢀNo.ꢁꢀindicated
Photo: Contact Inserted
1 0
9
7
5
3
1
ContactꢀNo.ꢀmark
ContactꢀNo.ꢁꢀindicated
Noteꢀ±
Noteꢀ3
The symbol ππ included in
HRS No. and the product spec
No. indicate a Specific No.
Product No.
HRS No.
Number of Contacts
A
B
DFꢁEAꢀ–0±EP–±.5C(ππ)
DFꢁEAꢀ–03EP–±.5C(ππ)
DFꢁEAꢀ–04EP–±.5C(ππ)
DFꢁEAꢀ–05EP–±.5C(ππ)
DFꢁEAꢀ–06EP–±.5C(ππ)
DFꢁEAꢀ–07EP–±.5C(ππ)
DFꢁEAꢀ–08EP–±.5C(ππ)
DFꢁEAꢀ–09EP–±.5C(ππ)
DFꢁEAꢀ–ꢁ0EP–±.5C(ππ)
CL54ꢁꢀ–ꢀ0957ꢀ–ꢀ5ꢀ–ꢀππ
CL54ꢁꢀ–ꢀ0958ꢀ–ꢀ8ꢀ–ꢀππ
CL54ꢁꢀ–ꢀ0959ꢀ–ꢀ0ꢀ–ꢀππ
CL54ꢁꢀ–ꢀ0960ꢀ–ꢀ0ꢀ–ꢀππ
CL54ꢁꢀ–ꢀ096ꢁꢀ–ꢀ±ꢀ–ꢀππ
CL54ꢁꢀ–ꢀ096±ꢀ–ꢀ5ꢀ–ꢀππ
CL54ꢁꢀ–ꢀ0963ꢀ–ꢀ8ꢀ–ꢀππ
CL54ꢁꢀ–ꢀ0964ꢀ–ꢀ0ꢀ–ꢀππ
CL54ꢁꢀ–ꢀ0965ꢀ–ꢀ3ꢀ–ꢀππ
±
3
08.0
ꢁ0.5
ꢁ3.0
ꢁ5.5
ꢁ8.0
±0.5
±3.0
±5.5
±8.0
0±.5
05.0
07.5
ꢁ0.0
ꢁ±.5
ꢁ5.0
ꢁ7.5
±0.0
±±.5
4
5
6
7
8
9
ꢁ0
Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity
for delivery will be changed according to the Specific No.
Note 2. : In regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends.
Note 3. : 2 to 7 contacts do not contain two convex portions, which is different from the above figure.
Note 4. : Styles of 2 to 4 contacts partially differ from the above figures.
* Refer to page B122 for retainer.
9
ꢀSocket
Pꢀ=
±.5
A
B
C
Noteꢀ±
ꢁ0
ꢁ
Photo: Contact Inserted
ContactꢀNo.ꢀmark
No.ꢀꢁꢀcontactꢀindicated
7.55
MoldꢀCavityꢀ
No.ꢀmark
Noteꢀ3
Noteꢀ4
Noteꢀ3
Noteꢀ4
The symbol ππ
included in HRS No.
and the product
spec No. indicate a
Specific No.
Product No.
HRS No.
Number of Contacts
A
B
C
DFꢁEꢀ–0±S–±.5C(ππ)
DFꢁEꢀ–03S–±.5C(ππ)
DFꢁEꢀ–04S–±.5C(ππ)
DFꢁEꢀ–05S–±.5C(ππ)
DFꢁEꢀ–06S–±.5C(ππ)
DFꢁEꢀ–07S–±.5C(ππ)
DFꢁEꢀ–08S–±.5C(ππ)
DFꢁEꢀ–09S–±.5C(ππ)
DFꢁEꢀ–ꢁ0S–±.5C(ππ)
DFꢁEꢀ–ꢁꢁS–±.5C(ππ)
DFꢁEꢀ–ꢁ±S–±.5C(ππ)
DFꢁEꢀ–ꢁ3D–±.5C(ππ)
DFꢁEꢀ–ꢁ4S–±.5C(ππ)
DFꢁEꢀ–ꢁ5S–±.5C(ππ)
CL54ꢁꢀ–ꢀ08ꢁꢁꢀ–ꢀ0ꢀ–ꢀππ
CL54ꢁꢀ–ꢀ08ꢁ±ꢀ–ꢀ±ꢀ–ꢀππ
CL54ꢁꢀ–ꢀ08ꢁ3ꢀ–ꢀ5ꢀ–ꢀππ
CL54ꢁꢀ–ꢀ08ꢁ4ꢀ–ꢀ8ꢀ–ꢀππ
CL54ꢁꢀ–ꢀ08ꢁ5ꢀ–ꢀ0ꢀ–ꢀππ
CL54ꢁꢀ–ꢀ08ꢁ6ꢀ–ꢀ3ꢀ–ꢀππ
CL54ꢁꢀ–ꢀ08ꢁ7ꢀ–ꢀ6ꢀ–ꢀππ
CL54ꢁꢀ–ꢀ08ꢁ8ꢀ–ꢀ9ꢀ–ꢀππ
CL54ꢁꢀ–ꢀ08ꢁ9ꢀ–ꢀꢁꢀ–ꢀππ
CL54ꢁꢀ–ꢀ08±0ꢀ–ꢀ0ꢀ–ꢀππ
CL54ꢁꢀ–ꢀ08±ꢁꢀ–ꢀ3ꢀ–ꢀππ
CL54ꢁꢀ–ꢀ08±±ꢀ–ꢀ6ꢀ–ꢀππ
CL54ꢁꢀ–ꢀ08±3ꢀ–ꢀ9ꢀ–ꢀππ
CL54ꢁꢀ–ꢀ08±4ꢀ–ꢀꢁꢀ–ꢀππ
±
3
0±.5
05.0
07.5
ꢁ0.0
ꢁ±.5
ꢁ5.0
ꢁ7.5
±0.0
±±.5
±5.0
±7.5
30.0
3±.5
35.0
08.0
ꢁ0.5
ꢁ3.0
ꢁ5.5
ꢁ8.0
±0.5
±3.0
±5.5
±8.0
30.5
33.0
35.5
38.0
40.5
05.4
07.9
ꢁ0.4
ꢁ±.9
ꢁ5.4
ꢁ7.9
±0.4
±±.9
±5.4
±7.9
30.4
3±.9
35.4
37.9
4
5
6
7
8
9
ꢁ0
ꢁꢁ
ꢁ±
ꢁ3
ꢁ4
ꢁ5
Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity
for delivery will be changed according to spec number.
Note 2. : The 2 contact connector is equipped with the convex portion to prevent false-insertion.
Note 3. : The 2 consult Has no wall on the locking side
Note 4. : The 2 to 5 contacts contain the retainer fixed convex portions at both ends.
* Refer to page B122 for the retainer.
10
ꢀRetainer
A
ꢁ.9
B
ꢁ.7
0.7
Pꢀ= ±.5
Note±
Note±
ContactꢀNo.ꢀmark
ꢁꢀ0
A
MoldꢀCavityꢀ
No.ꢀmark
The symbol ππ included in
HRS No. and the product spec
No. indicates the Specific No.
Product No.
HRS No.
Number of Contacts
A
B
DFꢁEꢀ–0±RS/P–±.5(ππ)
DFꢁEꢀ–03RS/P–±.5(ππ)
DFꢁEꢀ–04RS/P–±.5(ππ)
DFꢁEꢀ–05RS/P–±.5(ππ)
DFꢁEꢀ–06RS/P–±.5(ππ)
DFꢁEꢀ–07RS/P–±.5(ππ)
DFꢁEꢀ–08RS/P–±.5(ππ)
DFꢁEꢀ–09RS/P–±.5(ππ)
DFꢁEꢀ–ꢁ0RS/P–±.5(ππ)
CL54ꢁꢀ–ꢀ097ꢁꢀ–ꢀ6
CL54ꢁꢀ–ꢀ097±ꢀ–ꢀ9
CL54ꢁꢀ–ꢀ0973ꢀ–ꢀꢁ
CL54ꢁꢀ–ꢀ0974ꢀ–ꢀ4
CL54ꢁꢀ–ꢀ0975ꢀ–ꢀ7
CL54ꢁꢀ–ꢀ0976ꢀ–ꢀ0
CL54ꢁꢀ–ꢀ0977ꢀ–ꢀ±
CL54ꢁꢀ–ꢀ0978ꢀ–ꢀ5
CL54ꢁꢀ–ꢀ0979ꢀ–ꢀ8
±
3
08.0
ꢁ0.5
ꢁ3.0
ꢁ5.5
ꢁ8.0
±0.5
±3.0
±5.5
±8.0
0±.5
05.0
07.5
ꢁ0.0
ꢁ±.5
ꢁ5.0
ꢁ7.5
±0.0
±±.5
4
5
6
7
8
9
ꢁ0
Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity
for delivery will be changed according to spec number.
Note 2. : The 2 to 4 contacts contain socket and plug fixed holes at both ends.
* This retainer can be used together with the socket and relay plug.
11
ꢀPlug crimping contact
ꢁ.5
±.±
0.64
0.64
ꢀApplicable cable (tin plating annealed copper wire)
ꢀRecommended cable
UL1061, UL1007
Conductor Size (Wire construction)
AWG # 20 (21 cores./0.18mm)
AWG # 22 (17 cores./0.16mm)
AWG # 24 (11 cores./0.16mm)
AWG # 26 (07 cores./0.16mm)
AWG # 28 (07 cores./0.127mm)
AWG # 30 (07 cores./0.1mm)
ꢀStrip length
3.0~3.7mm
Note : If other cables are used instead of the applicable
cable, contact Hirose sales department.
Applicable Cable
Applicable
Cable Indication
Packaging
Type
Product No.
HRS No.
Quantity
AWG
Jacket Diameter
Reel
Bag
Reel
Bag
Reel
Bag
10,000
100
DFꢁEꢀ–ꢀ±0±±PCF CL54ꢁꢀ–ꢀ0937ꢀ–ꢀ8
DFꢁEꢀ–ꢀ±0±±PC CL54ꢁꢀ–ꢀ0938ꢀ–ꢀ0
DFꢁEꢀ–ꢀ±4±8PCF CL54ꢁꢀ–ꢀ0939ꢀ–ꢀ3
20
22
AWGꢀ#ꢀ±0
AWGꢀ#ꢀ±±
ꢁ.±~ꢁ.9mm
10,000
100
24
28
AWGꢀ#ꢀ±4
AWGꢀ#ꢀ±8
0.9~ꢁ.5mm
0.6~ꢁ.±mm
DFꢁEꢀ–ꢀ±4±8PC
DFꢁEꢀ–ꢀ30PCF
DFꢁEꢀ–ꢀ30PC
CL54ꢁꢀ–ꢀ0940ꢀ–ꢀ±
CL54ꢁꢀ–ꢀ094ꢁꢀ–ꢀ5
CL54ꢁꢀ–ꢀ094±ꢀ–ꢀ8
10,000
100
30
AWGꢀ#ꢀ30
ꢀꢀCrimping contact extraction tool DF-C-PO(B)
12
ꢀSocket crimping contact
ꢀDF1E-2022SCF
ꢀDF1B -ꢀ*ꢀ*ꢀ*ꢀ*ꢀSCF
ꢁ.75
0.975
ꢁ.75
ꢁ.4
ꢁ.95
Applicableꢀcableꢀindicated
0.83
ꢁ.95
Applicableꢀcableꢀindicated
0.55
ꢀApplicable cable (tin plating annealed copper wire)
ꢀRecommended cable
UL1061, UL1007
Conductor Size (Wire construction)
AWG # 20 (21 cores./0.18mm)
AWG # 22 (17 cores./0.16mm)
AWG # 24 (11 cores./0.16mm)
AWG # 26 (07 cores./0.16mm)
AWG # 28 (07 cores./0.127mm)
AWG # 30 (07 cores./0.1mm)
ꢀStrip length
±.0mm~±.5mm
Note : If other cables are used instead of the applicable
cable, consult Hirose sales department.
Applicable Cable
Applicable
Cable Indication
Packaging
Type
Product No.
HRS No.
Quantity
AWG
Jacket Diameter
Reel
Bag
Reel
Bag
Reel
Bag
Reel
Bag
10,000
100
DF1E –ꢀ2022SCF CL54ꢁꢀ–ꢀ0999ꢀ–ꢀ5
DF1E –ꢀ2022SC CL54ꢁꢀ–ꢀꢁ000ꢀ–ꢀ±
DF1B –ꢀ2022SCF CL54ꢁꢀ–ꢀ0±±3ꢀ–ꢀꢁ
DF1B –ꢀ2022SC CL54ꢁꢀ–ꢀ0±±4ꢀ–ꢀ4
DF1B –ꢀ2428SCF CL54ꢁꢀ–ꢀ0678ꢀ–ꢀꢁ
20
22
AWGꢀ#ꢀ±0
AWGꢀ#ꢀ±±
ꢁ.±~ꢁ.9mm
10,000
100
20
22
AWGꢀ#ꢀ±0
AWGꢀ#ꢀ±±
ꢁ.±~ꢁ.9mm
0.9~ꢁ.5mm
0.6~ꢁ.±mm
10,000
100
24
28
AWGꢀ#ꢀ±4
AWGꢀ#ꢀ±8
DF1B –ꢀ2428SC
DF1B –ꢀ30SCF
DF1B –ꢀ30SC
CL54ꢁꢀ–ꢀ0679ꢀ–ꢀ4
CL54ꢁꢀ–ꢀ068±ꢀ–ꢀ9
CL54ꢁꢀ–ꢀ0683ꢀ–ꢀꢁ
10,000
100
30
AWGꢀ#ꢀ30
ꢀꢀCrimping contact extraction tool DF-C-PO(B)
13
BCrimping tools
Item
Product No.
AP105 –ꢀDF1E –ꢀ2022S
AP105 –ꢀDF1B –ꢀ2022S
AP105 –ꢀDF1B –ꢀ2428S
AP105 –ꢀDF1B –ꢀ30S
AP105 –ꢀDF1B –ꢀ2022P
AP105 –ꢀDF1B –ꢀ2428P
AP105 –ꢀDF1B –ꢀ30P
CM –ꢀ105
HRS No.
Applicable Contact
DFꢁEꢀ–ꢀ±0±±SCF
DFꢁBꢀ–ꢀ±0±±SCF
DFꢁBꢀ–ꢀ±4±8SCF
DFꢁBꢀ–ꢀ30SCF
DFꢁEꢀ–ꢀ±0±±PCF
DFꢁEꢀ–ꢀ±4±8PCF
DFꢁEꢀ–ꢀ30PCF
––––––
CL901 –ꢀ4561 –ꢀ0
CL901 –ꢀ4510 –ꢀ9
CL901 –ꢀ4518 –ꢀ0
CL901 –ꢀ4517 –ꢀ8
CL901 –ꢀ4509 –ꢀ0
CL901 –ꢀ4521 –ꢀ5
CL901 –ꢀ4519 –ꢀ3
CL901 –ꢀ0005 –ꢀ4
CL550 –ꢀ0277 –ꢀ1
CL550 –ꢀ0182 –ꢀ7
CL550 –ꢀ0209 –ꢀ1
CL550 –ꢀ0211 –ꢀ3
CL550 –ꢀ0278 –ꢀ4
CL550 –ꢀ0279 –ꢀ7
CL550 –ꢀ0280 –ꢀ6
K
K
K
K
K
K
Applicator
K
K
K
K
K
K
K
K
Main Press Unit
HT102/DF1E –ꢀ2022S
DF1B –ꢀTA2022SHC
DF1B –ꢀTA2428SHC
DF1B –ꢀTA30SHC
DFꢁEꢀ–ꢀ±0±±SC
DFꢁBꢀ–ꢀ±0±±SC
DFꢁBꢀ–ꢀ±4±8SC
DFꢁBꢀ–ꢀ30SC
K
K
K
K
K
K
Manual Crimping Tool
HT102/DF1BE –ꢀ2022P
HT102/DF1BE –ꢀ2428P
HT102/DF1BE –ꢀ30P
DFꢁEꢀ–ꢀ±0±±PC
DFꢁEꢀ–ꢀ±4±8PC
DFꢁEꢀ–ꢀ30PCF
DFꢁEꢀ–ꢀ±0±±SCꢀ(F)
Contact Extraction Tool
DF – C – PO (B)
CL550 –ꢀ0179 –ꢀ2
DFꢁBꢀ–ꢀ*ꢀ*ꢀ*ꢀ*ꢀSCꢀ(F)
DFꢁEꢀ–ꢀ*ꢀ*ꢀ*ꢀ*ꢀPCꢀ(F)
K
Note 1. : Add "K" to the last number of the product, in order to use DF1B series tools, which have been conventionally merchandized.
Note 2. : f any trouble has occurred due to other tools, which are not designated by Hirose, Hirose won't guarantee any products.
14
BApplication pattern
ꢀStandard header
8.5
DFꢁEꢀ_ꢀπꢀSꢀ_ꢀ±.5ꢀC
DFꢁEꢀ_ꢀπꢀRSꢀ/ꢀPꢀ_ꢀ±.5
ꢁ8.8
ꢁ7.3
DFꢁE#ꢀ_ꢀπꢀPꢀ_ꢀ±.5ꢀDSA
DFꢁEꢀ_ꢀπꢀPꢀ_ꢀ±.5ꢀDS
DFꢁEꢀ_ꢀπꢀRSꢀ/ꢀPꢀ_ꢀ±.5
DFꢁEꢀ_ꢀπꢀSꢀ_ꢀ±.5ꢀC
ꢁ0.8
ꢁ4.3
3.7
3
ꢀHeader for potting
8
DFꢁEꢀ_ꢀπꢀSꢀ_ꢀ±.5ꢀC
DFꢁEꢀ_ꢀπꢀRSꢀ/ꢀPꢀ_ꢀ±.5
PottingꢀResin
3.±
DFꢁE#ꢀ_ꢀπꢀPꢀ_ꢀ±.5ꢀDSA
ꢀPanel mounting lock in-line plug
ꢀIn-line plug
±5.3
ꢁ7
±5.3
DFꢁEꢀ_ꢀπꢀRSꢀ/ꢀPꢀ_ꢀ±.5
DFꢁEꢀ_ꢀπꢀRSꢀ/ꢀPꢀ_ꢀ±.5
DFꢁEꢀ_ꢀπꢀRSꢀ/ꢀPꢀ_ꢀ±.5
DFꢁEꢀ_ꢀπꢀRSꢀ/ꢀPꢀ_ꢀ±.5
DFꢁEꢀ_ꢀπꢀSꢀ_ꢀ±.5ꢀC
DFꢁEꢀ_ꢀπꢀSꢀ_ꢀ±.5ꢀC
DFꢁEAꢀ_ꢀπꢀEPꢀ_ꢀ±.5ꢀC
±±.3
DFꢁEꢀ_ꢀπꢀEPꢀ_ꢀ±.5ꢀC
ꢁ5.5
±±.3
15
BPrecautions for use
1. Recommended soldering condition
: ꢀFlow condition with automatic solder machine
Soldering temperature: 25± 5ç, soldering time: within 3 seconds
ꢀManual soldering condition
Soldering temperature: 290± 10ç, soldering time: within 2 seconds
2. Cleaning condition
: Refer to the "Nylon Connector Instruction Manual" contained in the other nylon
connector catalog.
However, if the connector is cleaned by the potting header, the detergent remains
within the connector, which will cause malfunction.
3. Connection condition
4. Cautions
: Refer to the "Nylon Connector Instruction Manual" contained in the other nylon
connector catalog.
: ꢀ To remove the connector, if the connector is forcedly removed, it will cause
connector damage. If the connector is hardly removed, slightly push the connector
once, and then remove it using the lock.
ꢀ In some method for laying the cable within equipment, a tension may be applied to
the cable so as to remove the contact. In this case, it is recommended to use the
retainer.
ꢀ If the potting process is implemented, it is desirable to fill the connector with resin,
considering the resin surface tensile force.
ꢀ The color phase of this product may be slightly different from that of the forming
product according to the manufacturing lot and future storage conditions, however
the difference doesn't affect the performance.
B127
相关型号:
©2020 ICPDF网 联系我们和版权申明