DF20A-50DP-1V(59) [HRS]
Board Connector, 50 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal;型号: | DF20A-50DP-1V(59) |
厂家: | HRS |
描述: | Board Connector, 50 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal 连接器 |
文件: | 总6页 (文件大小:286K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
NEW
1mm-pitch, two-row, low-profile cable connector for multi-contact boards
DF20 series
Low-profile design
Fig. ➀
Slim connector external
dimensions
■Features
1. Fine-pitch, low-profile design
This connector features a 1.0mm-pitch and 5.8mm mating
(
)
height above the board. See Fig.➀.
2. Slim outline
.New-design thin metal reinforcement decreases connector
(
)
external dimension. See Fig.➁.
3. Absorption cap
Photo ➀
Header has a 5.4 x 4.6mm cap to allow a standard nozzle for
absorption.
New-design thin metal reinforcement
decreases connector external dimensions.
4. Outstanding variety of products
(1) Number of contacts: 10, 20, 30, 40, and 50
(2) Pin header: With and without a positioning guide post
Cable side connector
■Applications
Notebook-type PCs, small office machines, small consumer
products
1mm-pitch 2-row
Photo ➁
2000.3
1
■Product standard
Rated current AWG#28 : 1A
Operating temperature range
Operating humidity range
Storage temperature range
-35~85ç (Note 1)
-35~85ç (Note 2)
-20~80%
-10~60ç (Note 2)
-40~70%
Rating
AWG#30 : 0.5A
AC100V
Rated voltage
Storage humidity range
Item
Standard
Condition
1.Insulation resistance
2.Voltage proof
Measure at DC100V.
500Mø or more
300V AC, applied for one minute.
Measure at 100mA.
No flashover or breakdown
3.Contact resistance
4.Unit mechanical force
5.Vibration
30Mø or less
Measure with a steel pin with thickness of 0.2± 0.005.
Frequency: 10Hz to 55Hz, amplitude of 0.75mm in 3 directions, 2h
Temperature of 40± 2ç , humidity of 90% to 95%, duration 96h
(-55ç :30min -> 5ç to 30ç : 2 to 3min -> 85ç :30min -> 5ç to 35ç :2 to 3min ) 5 cycles
50 mechanical-operation cycles
MIN 0.3N(30gf), MAX 2N(200gf)
No electrical discontinuity for 1µs or more
Contact resistance 30mø or less, insulation resistance 100Mø or more
Contact resistance 30mø or less, insulation resistance 500Mø or more
Contact resistance 30mø
6.Damp heat
7.Rapid change of temperature
8.Mechanical operation
9.Resistance to soldering heat
Reflow: At the recommended temperature profile, manual soldering: iron temperature 300
ç for 3s
No melting of resin portion, which affects performance
Note1: Includes the temperature rise from current flow.
Note2: The term storage refers to an unused product prior to board mounting that is being kept for a long period.
The operating temperature and humidity rage are suited to the non-conducting condition following board assembly.
The operating temperature and humidity ranges are also applicable to those mounted on a board before use.
Note3: The aforementioned specifications are representative of this series. For information on specific parts, confirm with Sales Office.
■Material
Product
Part
Material
Color / Finish
Beige
UL standard
UL94V-0
----------
Crimp socket
Insulation
Terminal
Insulation
Terminal
Metal
Polyamide resin
Phosphor bronze
Polyamide resin
Phosphor bronze
Brass
Crimp-type terminal for socket
Gold plating
Beige
UL94V-0
----------
Pin header
Gold plating
Solder plating
----------
■Product number composition
The type name represents a specific product specification.
To order a product, specify the type from pages 3 to 4.
●Connector
DF 20 # - ✽ DS - 1 C
1
2
3
4
5
6
7
1
2
3
Series name : DF
Series No. : 20
Profile symbol :
■Pin header
Number of contacts : 10,20,30,40,50
Connector type
DS : Double row socket
DP : Double row pin header
4
5
■None : With guide post
■A : Without guide post
■Crimp socket
■A : Profile change symbol
6 Contact pitch
Wiring type / terminal profile
C : Crimp case
7
V : Straight SMT header
●Terminal
DF20 B - 2830 SCF A (✽✽)
2
1
3
4
5
1
2
3
4
Symbol
Type / Packaging
SFC : Socket contact reel
Plating
5
Specification
None : 10,000 pieces per reel
41 : 20,000 pieces per reel
B : Profile change symbol
Appropriate wire size
2830 : AWG#28~30
A : Gold
2
■Double row socket
Socket connected with cables
Unit: mm
B
[Specification No.]-✽,(✽✽)
None: 1 package, 100 pieces
Insertion connector
DF20A-10DS-1C
DF20A-20DS-1C
DF20A-30DS-1C
DF20A-40DS-1C
DF20A-50DS-1C
HRS No.
Number of contacts
A
686-0020-3
686-0021-6
686-0022-9
686-0023-1
686-0024-4
10
20
30
40
50
17.2
12.2
17.2
22.2
27.2
14.0
19.0
14.0
19.0
24.0
(Note) Sockets are sold in bulk packages of (100 pieces). Specify the number of packages.
■Crimp-type terminal for socket
Insertion connector
HRS No.
Type
Quantity
Color / Finish
DF20B-2830SCFA(✽✽)
686-0025-7-✽✽
Reel terminal See the column of specification No. Gold plating
[Specification No.]-✽,(✽✽)
None: 1 reel, 10 000 pieces
41: 1 reel, 20 000 pieces
●Applicable wire (tinned soft conductor)
Applicable wire size (core composition)
AW ... (7 pieces/0.127mm)
AW ... (7 pieces/0.1mm)
Sheath diameter
Ø0.5~Ø0.6mm
●
Recommended wire
●Length of strip
●1.2~1.9mm
●UL1571
(Note) Please contact us when you use wires other than
those specified in the Table.
●Applicable crimping tools
Type
Applicator
Press
HRS No.
Insertion connector
CL901-4572-6 AP105-DF20-2830S
CL901-0005-4 CM-105
■List of replacement parts
Manual crimping tool CL550-0283-4 HT302/DF20B-2830S
Type
Insulation crimper
Wire crimper
Insertion connector
AP105-DF20-2830S(61)
AP105-DF20-2830S(62)
HRS No.
Note1:
Product is not guaranteed when non-specified tools
are used.
901-4572-6-61
901-4572-6-62
Note2:
Note3:
Terminals are cut for manual crimping tool use.
The press and applicator for the DF13 series must
have the blade changed for the DF20 series.
Insulation anvil and wire anvil AP105-DF20-2830S(63)
901-4572-6-63
3
■ Double row straight pin header
■ Recommended board pattern
(Note 1)
Keep-out area (hatched). Pattern in this
area must be protected by resist.
(Note 2)
The positioning hole is not required for
sockets without a guide post.
Unit: mm
[Specification No.]-✽,(✽✽)
(59) Gold plating, embossed-
tape packaging
HRS No.
Insertion connector
DF20A-10DP-1V(✽✽)
DF20A-20DP-1V(✽✽)
DF20A-30DP-1V(✽✽)
DF20A-40DP-1V(✽✽)
DF20A-50DP-1V(✽✽)
DF20A-10DP-1V(✽✽)
DF20A-20DP-1V(✽✽)
DF20A-30DP-1V(✽✽)
DF20A-40DP-1V(✽✽)
DF20A-50DP-1V(✽✽)
Number of contacts
A
B
C
D
Remarks
CL686-0013-8-✽✽
CL686-0014-0-✽✽
CL686-0015-3-✽✽
CL686-0016-6-✽✽
CL686-0017-9-✽✽
CL686-0008-8-✽✽
CL686-0009-0-✽✽
CL686-0010-0-✽✽
CL686-0011-2-✽✽
CL686-0012-5-✽✽
10
20
30
40
50
10
20
30
40
50
14.0 17.3 16.6 15.7
19.0 12.3 11.6 10.7
(Note 1)
14.0 17.3 16.6 15.7 Guide post: Yes
19.0 22.3 21.6 20.7
Specify the number of
reels to order emboss
packaged parts (1 reel:
1000 pieces).
24.0 27.3 26.6 25.7
14.0 17.3 16.6 15.7
19.0 12.3 11.6 10.7
(Note 2)
14.0 17.3 16.6 15.7
19.0 22.3 21.6 20.7
24.0 27.3 26.6 25.7
Guide post: No
E m b o s s e d - t y p e -
packaged parts include
an absorption cap
4
■Embossed tape carrier dimension drawing (as per JIS-C-0806)
●10 and 20 contacts
●30, 40 and 50 contacts
●Reel condition drawing
Unit: mm
[Specification No.]-✽,(✽✽)
(01) Gold-plated product
Insertion connector Number of contacts
A
B
C
D
DF20A-10DP-1V(✽✽)
DF20A-20DP-1V(✽✽)
DF20A-30DP-1V(✽✽)
DF20A-40DP-1V(✽✽)
DF20A-50DP-1V(✽✽)
DF20A-10DP-1V(✽✽)
DF20A-20DP-1V(✽✽)
DF20A-30DP-1V(✽✽)
DF20A-40DP-1V(✽✽)
DF20A-50DP-1V(✽✽)
10
20
30
40
50
10
20
30
40
50
16
24
32
44
44
16
24
32
44
44
17.5 16.4 --------
11.5 24.4 --------
14.2 32.4 28.4
20.2 44.4 40.4
20.2 44.4 40.4
17.5 16.4 --------
11.5 24.4 --------
14.2 32.4 28.4
20.2 44.4 40.4
20.2 44.4 40.4
(Note) The products of the (59)
specification are those of (01)
specification in embossed-tape
pack-age. The Product of (01)
specifi-cation is not avail-able.
5
■Cautions in using sockets
1. Recommended temperature profile
(Note 1) The temperature profile can be applied up to twice with the normal temperature intervened in between.
(Note 2) The temperature is measured at the connector lead board surface.
Soldering iron temperature 290 ± 10ç , soldering time 3 seconds or less
0.15mm
2. Recommended manual soldering conditions
3. Recommended screen thickness
4. Warpage of board
Max. 0.03mm at the connector center with the connector ends as the reference.
See the separate “Guide to Hirose Nylon connectors.”
See the separate “Guide to Hirose Nylon connectors.”
5. Cleaning condition
6. Wiring condition
■
As crimp terminals are extremely small, crimping must be performed with care: observe
the directions in the Crimping Condition Sheet and Crimping Standard Sheet.
■ Don,t twist to disconnect connectors, they will be damaged.
“
“
”
7. Precautions
6
相关型号:
©2020 ICPDF网 联系我们和版权申明