DF22-4P-7.92DS(05)_技术文档

7.92mm Contact Pitch High-Current Connectors for Internal

Power Supplies (UL, C-UL and TÜV Listed)

DF22 Series

Completely

enclosed

locking system

Positive

Lock

Protection from

shorts circuits

between adjacent

contacts

Fig.1

■Features

Keying for multiple use

1. Rated up to 43A

Single position connector can carry current of 43A with 10

AWG conductor. Please refer to Table #1 for current ratings for

multi-position connectors using other conductor sizes.

●R Type (Guide key : right side, Color : black)

2. Positive Locking Function

Reliable interior lock protects mated connectors from

accidental disconnection. (Fig.1)

3. Prevention of Incorrect Connections

To prevent incorrect connection when using multiple connectors

having the same Number of contacts, 3 product types having

different mating configurations are available. (Fig.2)

4. Molded-in contact retention tabs

Handling of terminated contacts during the crimping is

easier and avoids entangling of wires, since there are

no protruding metal tabs.

●StandardType (Guide key : inside, Color : natural)

5. Prevention of incorrect board placement

Built-in posts assure correct connector placement and

orientation on the board.

6. Supports resin sealing

Allows potting up to 10mm.

7. Prevention of Short Circuits Between

Adjacent Contacts

●

L Type (Guide key : left side, Color : red)

Each Contact is completely surrounded by the housing

wall electrically isolating it from adjacent contacts.

8. Increased Retention Force of Crimped

Contacts

Improved pull-out force design.

9. Full Line of Crimp Socket Contacts

Hirose has released DF22C-*S-7.92C which has easy

to push/release latch design. and DF22B-*S-7.92C/

DF22C-*S-7.92C which has improved electrical

insulation properties.

*The image on the left show header (the board dip

side), the image on the right show the socket

(cable side).

*The guide key position is indicated in position

facing the mating surface of the header.

10. In-line Connections

Wire-to-wire connection is also available. Space is saved

with 2-row (2×2) layout for 4 pos.

Fig.2

11. UL, C-UL, and TÜV Certified.

12. Glow Wire compliance (Compliant with IEC 60695-2-11)

1

2017.7r

DF22 Series●7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)

■Product Specifications

No. of contacts 10 AWG

12 AWG

25A

20A

18A

14 AWG

20A

18A

15A

16 AWG

15A

13A

Operating temperature range -55ç to 85ç (Note 2)

1

2

3

4

5

30A

25A

22A

Current

rating

(Note 1)

Operating humidity range 20% to 80%

Storage temperature range -10ç to 60ç (Note 3)

Storage humidity range 40% to 70% (Note 3)

UL/C-UL/TÜV File No. and Recognition No.

Ratings

18A

15A

13A

UL

: E52653

: R9950703

Voltage

rating

AC/DC 1000V

C-UL

TÜV

Current Rating

See table below

See table above (Δt=30ç)

See table above

Voltage Rating

AC/DC 600V

UL

C-UL

TÜV

No. of Contacts

10 AWG

43A

38A

33A

12 AWG

38A

32A

26A

14 AWG

26A

23A

22A

16 AWG

Current rating of

UL Standards

(Ambient temperature : 25ç)

(Note 1)

1

2

3

4

5

21A

19A

33A

26A

22A

Item

Specifications

Conditions

1. Contact Resistance

2. Insulation Resistance

3. Withstand Voltage

4. Contact Insertion and Extraction Forces 0.3N min., 5N max

5. Durability

No more than 5mø

No less than 1,000Mø

No flashover or breakdown

Measured at 1mA and no higher than 20mV

Measured at DC=1000V

AC 2500 V is applied for one minute.

Measured with a steel pin of 1.6 x 0.8 0.002 thickness

30 mating cycles

Contact resistance : no more than 10mø

6. Vibration Resistance

7. Shock Resistance

8. Moisture-Resistance

9. Temperature cycles

No electrical discontinuity of 1μs or greater Frequency 10-55 Hz, half amplitude 0.75 mm, 10 times in each of the three directions

No electrical discontinuity of 1μs or greater Accelerated velocity : 490 m/s for 11 ms, half-sine wave in 3 directions, 3 times for each direction

2

Contact resistance : no more than 10mø

Temperature : 40 2ç ; humidity : 90 to 95%, left as it is for 96 hours

(-55ç : 30 minutes➝ 5 to 35ç : 5 minutes➝ 85ç : 30 minutes➝ 5 to 35ç : 5 minutes) for 5 cycles

The resin parts should withstand the

temperature and resist melting.

Flow : 260ç, 10 sec

Hand soldering : temperature of soldering iron at 300ç for 3 seconds

10. Solder heat Resistance

Note 1 : This is the maximum current rating while all pins are powered or used as all power lines. If you split the current over multiple

lines, please factor in your own safety margin.

Note 2 : Includes temperature rise caused by current flow.

Note 3 : The storage condition refers to long-term storage of the product on the shelf before assembly. Please use the operating

temperature for temporary storage such as pre-assembly and during shipping.

Materials / Finish

■

Product

Sockets

Part

Material

Remarks

UL94V-0

----------

Finish

Color : Natural white

Insulator

Contacts

Insulator

Contacts

Polyamide

(Note)

Crimp contacts

High conductivity copper alloy

Polyamide (Glass reinforced)

High conductivity copper alloy

Tin-lead plated or Gold plated

Color : Natural beige

(Note)

UL94V-0

----------

Headers

Tin-copper plated or Gold plated

Note : Standard Color, colors of the differing coupling forms are black for DF22R and red for DF22L.

Product Number Structure

■

Refer to the chart below when determining the product specifications from the product number.

Please select from the product numbers listed in this catalog when placing orders.

●Socket, Header

●Contacts

DF22 B L - 2 S - 7.92 C (**)

DF22 A - 1416 SCF A

q

w

e

r

t

y

u

q

i

o

!

Series name : DF22

Form Type

Number of contacts : 1 to 5

Applicable Cable

Blank : UL1430

q

w

r

t Connector type

i

o

!

A

: UL1015

S

: Socket

Sockets

Applicable Conductor

1416 : 14 to 16 AWG

1012 : 10 to 12 AWG

Packaging

DS

P

: Double-row socket

: Header

Blank : Standard height, standard lock (Type I)

B : Long type, standard lock (Type III)

C : Long type, ergonomic lock (Type IV)

In-line Plugs

EP

: In-line plug

DEP

:

Double-row in-line plug

SCF : Socket contacts / reel

SC : Socket contacts / pack

RS/P

: Retainer

Blank : With panel stop

Contact pitch : 7.92 mm

Type of housing

y

u

A : Without panel stop

Guide key type

PCF : In-line plug contacts / reel

PC : In-line plug contacts / pack

Plating specifications

e

C

: Crimp housing

Blank : Inside (Color: natural)

R : Right side (Color: black)

L : Left side (Color: red)

DSA

DS

: Straight header

!

: Right-angle header

Blank : Tin plated

No letter : Retainer

A

: Gold plated

2

DF22 Series●7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)

■Crimp Sockets (Standard Height Type)

Shown with terminated and contacts installed.

A

1 Pos.

2 to 5 Pos.

8

B

P=7.92

Type 1

Standard lock

Type 1

Standard lock

Contact No. 1

(11.55)

No. of contacts

indicator

Polarity

(11.55)

mark

Cavity No.

A

1

A

3

No. of contacts

indicator

Cavity No.

■ Type I

Height : Standard type, Standard lock

Note : The part number and HRS No. have changed to reflect the

product form change of the 2 to 5 pos. types.

Standard Type (Guide Key : Inside, Color : White) _{Unit : mm}

Part No.

HRS No.

No. of Contacts

A

B

DF22-1S-7.92C(28)

DF22-2S-7.92C(28)

DF22-3S-7.92C(28)

DF22-4S-7.92C(28)

DF22-5S-7.92C(28)

680-1012-2 28

680-1004-4 28

680-1005-7 28

680-1006-0 28

680-1007-2 28

1

2

3

4

5

8.00 -----

15.50 7.92

23.42 15.84

31.34 23.76

39.26 31.68

R Type (Guide Key : Right Side, Color : Black)

Unit : mm

Part No.

HRS No.

No. of Contacts

A

B

DF22R-1S-7.92C(28)

DF22R-2S-7.92C(28)

DF22R-3S-7.92C(28)

DF22R-4S-7.92C(28)

DF22R-5S-7.92C(28)

680-1026-7 28

680-1027-0 28

680-1028-2 28

680-1029-5 28

680-1030-4 28

1

2

3

4

5

8.00 -----

15.50 7.92

23.42 15.84

31.34 23.76

39.26 31.68

L Type (Guide Key : Left Side, Color : Red)

Unit : mm

Part No.

HRS No.

No. of Contacts

A

B

DF22L-1S-7.92C(28)

DF22L-2S-7.92C(28)

DF22L-3S-7.92C(28)

DF22L-4S-7.92C(28)

DF22L-5S-7.92C(28)

680-1031-7 28

680-1032-0 28

680-1033-2 28

680-1034-5 28

680-1035-8 28

1

2

3

4

5

8.00

15.50

-----

7.92

23.42 15.84

31.34 23.76

39.26 31.68

Note 1 : Bag packaging (100 pcs/pack). Order by number of packs.

Note 2 : Every even number position has a different locking design.

3

DF22 Series●7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)

■Crimp Sockets (Height, Long Type)

Shown with terminated and contacts installed.

A

B

1 Pos.

2 to 5 Pos.

P=7.92

8

Type 4

Type 3

Height : Long type,

user-friendly operation

Enhanced

ergonomic lock

Standard lock

Contact No. 1

No. of contacts

indicator

Polarity

mark

(12.75)

(11.55)

(12.75)

Cavity No.

A

3

A

1

No. of contacts

indicator

Cavity No.

■ Type III

Height : Long type, Standard lock

■ Type IV

Height : Long type, Enhanced ergonomic lock

Standard Type (Guide Key : Inside, Color : White)

Unit : mm

Part No.

No. of Contacts

A

B

Part No.

No. of Contacts

A

B

HRS No.

680-1097-5

680-1098-8

680-1099-0

680-1100-8

HRS No.

680-1101-0

680-1102-3

680-1103-6

680-1104-9

DF22B-2S-7.92C

DF22B-3S-7.92C

DF22B-4S-7.92C

DF22B-5S-7.92C

2

3

4

5

15.50 7.92

23.42 15.84

31.34 23.76

39.26 31.68

DF22C-1S-7.92C

DF22C-2S-7.92C

DF22C-3S-7.92C

DF22C-4S-7.92C

1

2

3

4

8.00 -----

15.50 7.92

23.42 15.84

31.34 23.76

Note 1 : Bag packaging (100 pcs/pack). Order by number of packs.

Note 2 : Every even number position has a different locking design.

R Type (Guide Key : Right Side, Color : Black)

Unit : mm

Part No.

No. of Contacts

A

B

HRS No.

DF22CR-3S-7.92C

680-1130-9

3

23.42 15.84

L Type (Guide Key : Left Side, Color : Red)

Unit : mm

Part No.

No. of Contacts

A

B

HRS No.

680-1133-7

680-1135-2

DF22CL-1S-7.92C

DF22CL-3S-7.92C

1

3

8.00 -----

23.42 15.84

Note 1 : Bag packaging (100 pcs/pack). Order by number of packs.

Note 2 : Every even number position has a different locking design.

4

DF22 Series●7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)

■Straight Header

1 Pos.

2 to 5 Pos.

A

B

10.8

9.3

No. of contacts

indicator

Cavity No.

A

3

A

Polarity

mark

0.8

2.3

3.9

3.2

Ø1.5

3.45

0.8

8.7

4.35

10.8

1

No. of contacts

indicator

[Specification number]

(05) : Tin-copper plated bag packaging

(25) : Tin-copper plated tray packaging (only 1 pos)

(06) : Gold plated, bag packaging

Standard Type (Guide Key : Inside, Color : Natural Beige)

Unit : mm

B

Recommended PCB Layout

(Board thickness : 1.6 0.1)

1 Pos.

Part No.

HRS No. No. of Contacts

A

B

Bag Packaging Tray Packaging Tin-copper plated Gold plated

DF22-1P-7.92DSA(**) 680-1013-5 **

DF22-2P-7.92DSA(**) 680-1014-8 **

DF22-3P-7.92DSA(**) 680-1015-0 **

DF22-4P-7.92DSA(**) 680-1016-3 **

DF22-5P-7.92DSA(**) 680-1017-6 **

1

2

3

4

5

----- -----

17.22 7.92

25.14 15.84

33.06 23.76

40.98 31.68

-----

✓

-----

✓

-----

✓

11.1 0.1

-----

✓

8.5 ^+0.1

--0.2

✓

2.5 ^+0.1

0

R Type (Guide Key : Right Side, Color : Black)

Unit : mm

Part No.

HRS No. No. of Contacts

A

B

Bag Packaging Tray Packaging Tin-copper plated Gold plated

DF22R-1P-7.92DSA(**) 680-1036-0 **

DF22R-2P-7.92DSA(**) 680-1037-3 **

DF22R-3P-7.92DSA(**) 680-1038-6 **

DF22R-4P-7.92DSA(**) 680-1039-9 **

DF22R-5P-7.92DSA(**) 680-1040-8 **

1

2

3

4

5

----- -----

17.22 7.92

25.14 15.84

33.06 23.76

40.98 31.68

-----

✓

-----

✓

-----

✓

2 to 5 Pos.

L Type (Guide Key : Left Side, Color : Red)

Unit : mm

(#)*¤%#%*

Part No.

HRS No. No. of Contacts

A

B

Bag Packaging Tray Packaging Tin-copper plated Gold plated

DF22L-1P-7.92DSA(**) 680-1041-0 **

DF22L-2P-7.92DSA(**) 680-1042-3 **

DF22L-3P-7.92DSA(**) 680-1043-6 **

DF22L-4P-7.92DSA(**) 680-1044-9 **

DF22L-5P-7.92DSA(**) 680-1045-1 **

1

2

3

4

5

----- -----

17.22 7.92

25.14 15.84

33.06 23.76

40.98 31.68

-----

✓

-----

✓

-----

✓

E2,#.'¤%#%*

7¤%#%*

✓

Note 1 : Bag packaging (100 pcs/pack). Order by number of packs.

Note 2 : Tray packaging (150 pcs/tray). Order by number of 150.

Note 3 : Every even number position has a different locking design.

Note 4 : Please contact Hirose representative if you have request for non-standard Au plating.

5

DF22 Series●7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)

A

B

C

■Right Angle Header

P=7.92

1.6

Contact No.1

A

5

Cavity No.

No. of contacts

indicator

3.7

Standard Type (Guide Key : Inside, Color : Natural Beige)

Unit : mm

5

Part No.

HRS No. No. of Contacts

A

B

C

Tin-copper plated Gold plated

DF22-2P-7.92DS(**) 680-1008-5 **

DF22-3P-7.92DS(**) 680-1009-8 **

DF22-4P-7.92DS(**) 680-1010-7 **

DF22-5P-7.92DS(**) 680-1011-0 **

2

3

4

5

19.80 15.00 7.92

27.72 22.92 15.84

35.64 30.84 23.76

43.56 38.76 31.68

(35)

(05)

(36)

(06)

-----

1.2

[specification number]

(05), (35) : Tin-copper plated

(06), (36) : Gold plated

(06)

R Type (Guide Key : Right Side, Color : Black)

Unit : mm

Tin-copper plated Gold plated

B

Recommended PCB Layout

(Board thickness : 1.6 0.1)

Part No.

HRS No. No. of Contacts

A

B

C

DF22R-2P-7.92DS(**) 680-1018-9 **

DF22R-3P-7.92DS(**) 680-1019-1 **

DF22R-4P-7.92DS(**) 680-1020-0 **

DF22R-5P-7.92DS(**) 680-1021-3 **

2

3

4

5

19.80 15.00 7.92

27.72 22.92 15.84

35.64 30.84 23.76

43.56 38.76 31.68

(05)

-----

(06)

-----

B± ±.±5

-----

C± ±.±5

P=7.92± ±.±5

L Type (Guide Key : Left Side, Color : Red)

Unit : mm

Part No.

HRS No. No. of Contacts

A

B

C

Tin-copper plated Gold plated

DF22L-2P-7.92DS(**) 680-1022-6 **

DF22L-3P-7.92DS(**) 680-1023-9 **

DF22L-4P-7.92DS(**) 680-1024-1 **

DF22L-5P-7.92DS(**) 680-1025-4 **

2

3

4

5

19.80 15.00 7.92

27.72 22.92 15.84

35.64 30.84 23.76

43.56 38.76 31.68

(05)

(06)

-----

(06)

Note 1 : Bag packaging (100 pcs/pack). Order by number of packs.

Note 2 : Every even number position has a different locking design.

Note 3 : Please contact Hirose representative if you have request for

non-standard Au plating.

■In-line Plug

1 Pos.

2, 3 Pos.

A

B

9.3

Contact No.1

Shown with terminated

and contacts installed.

Shown with terminated

and contacts installed.

No. of contacts

indicator

10.5

No. of contacts

indicator

Cavity No.

3

A

1

Polarity

mark

3

2

1

Standard Type (Guide Key : Inside, Color : Natural Beige)

Unit : mm

R Type (Guide Key : Right Side, Color : Black)

Unit : mm

Part No.

HRS No.

No. of Contacts

A

B

Part No.

HRS No.

No. of Contacts

A

B

DF22A-1EP-7.92C 680-1053-0

DF22A-2EP-7.92C 680-1054-2

DF22A-3EP-7.92C 680-1055-5

1

2

3

9.30

18.00

-----

DF22AR-2EP-7.92C 680-1069-0

DF22AR-3EP-7.92C 680-1070-9

2

3

18.00

7.92

26.00 15.84

L Type (Guide Key : Left Side, Color : Red) Unit : mm

Part No.

HRS No.

No. of Contacts

A

B

DF22AL-2EP-7.92C 680-1074-0

2

18.00

7.92

Note 1 : Bag packaging (100 pcs/pack). Order by number of packs.

Note 2 : Every even number position has a different locking design.

6

DF22 Series●7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)

■In-line Plug (Panel Lock Type)

Shown with terminated and contacts installed.

3

A

B

3

1 Pos.

2, 3 Pos.

9.3

Contact No.1

No. of contacts

indicator

Cavity No.

No. of contacts

indicator

10.5

Cavity No.

A

1

3

A

Polarity

mark

3

2

1

16.3

C

Standard Type (Guide Key : Inside, Color : White)

Unit : mm

BPanel Cutout

Part No.

HRS No.

680-1048-0

680-1049-2

680-1050-1

No. of Contacts

A

B

C

Panel thickness

X

1 Pos.

DF22-1EP-7.92C

DF22-2EP-7.92C

DF22-3EP-7.92C

1

2

3

9.30 ----- 16.30

17.22 7.92 24.22

25.14 15.84 32.14

(15.8-X) ^+0.1

2.0

1.6

1.2

0.8

0.48

0.96

1.44

1.92

0

9.6^+0.1

0

R Type (Guide Key : Right Side, Color : Black)

Unit : mm

Part No.

HRS No.

680-1059-6

680-1060-5

No. of Contacts

A

B

C

DF22R-2EP-7.92C

DF22R-3EP-7.92C

2

3

17.22 7.92 24.22

25.14 15.84 32.14

L Type (Guide Key : Left Side, Color : Red)

Unit : mm

2, 3 Pos.

(C-0.5-X) ^+0.1

0

Part No.

HRS No.

680-1063-3

680-1064-6

No. of Contacts

A

B

C

(A+0.4) ^+0.1

0

DF22L-1EP-7.92C

DF22L-2EP-7.92C

1

2

9.30 ----- 16.30

17.22 7.92 24.22

11 0.2

Note 1 : Bag packaging (100 pcs/pack). Order by number of packs.

Note 2 : Every even number position has a different locking design.

Note 1 : Please ensure when mating this connector

that the tapered portions of the panel are

facing outward towards the receptacle

connector’s mating interface.

7

DF22 Series●7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)

■In-line Double-row Socket

15.5

7.92

Standard lock

Shown with terminated and contacts installed.

Standard Type (Guide Key : Inside, Color : White)

Unit : mm

Lock type

Standard lock

(21.29)

Polarity

mark

Contact No.1

Part No.

HRS No.

No. of Contacts

DF22B-4DS-7.92C

680-1142-8

4

1

3

A

R Type (Guide Key : Right Side, Color : Black)

Unit : mm

Lock type

Standard lock

Cavity No.

Part No.

HRS No.

No. of Contacts

2

4

DF22BR-4DS-7.92C 680-1156-2

4

No. of contacts

indicator

L Type (Guide Key : Left Side, Color : Red)

Unit : mm

Lock type

Standard lock

Part No.

HRS No.

No. of Contacts

DF22BL-4DS-7.92C 680-1161-2

4

Note : Bag packaging (100 pcs/pack). Order by number of packs.

Panel lock type

Without panel lock function

3

17.22

7.92

3

17.22

7.92

■In-line Double-row Plug

Contact No.1

Cavity No.

Contact No.1

10.5

No. of contacts

24.22

No. of contacts

indicator

Cavity No.

indicator

4

A

ꢀ4

A

Shown with terminated and contacts installed.

Polarity

mark

Polarity

mark

Standard Type (Guide Key : Inside, Color : White)

Unit : mm

3

4

1

2

3

4

1

2

Part No.

HRS No.

No. of Contacts

Connector type

DF22-4DEP-7.92C

680-1051-4

4

Panel lock type

DF22A-4DEP-7.92C 680-1056-8

Without panel lock function

R Type (Guide Key : Right Side, Color : Black)

Unit : mm

Connector type

Panel lock type

BRecommended Panel Cutout

Part No.

HRS No.

No. of Contacts

(Panel mount type)

DF22R-4DEP-7.92C

680-1170-3

4

(23.72-X)^+0.1

0

19.76^+0.1

11 0.2

L Type (Guide Key : Left Side, Color : Red)

Unit : mm

0

Part No.

HRS No.

No. of Contacts

Connector type

DF22L-4DEP-7.92C

680-1175-7

4

Panel lock type

DF22AL-4DEP-7.92C 680-1189-1

Without panel lock function

Panel thickness

X

Note : Bag packaging (100 pcs/pack). Order by number of packs.

2.0

1.6

1.2

0.8

0.48

0.96

1.44

1.92

17.62^+0.1

0

Note 1 : Please ensure when mating this connector

that the tapered portions of the panel are

facing outward towards the receptacle

connector’s mating interface.

8

DF22 Series●7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)

■Retainer

For Standard height, standard lock (Type I)

For Long type, standard lock (Type III)

Long type, enhanced ergonomic lock (Type IV)

A

B

A

B

7.92

Cavity No.

A5

4

3

2

1

A5

4

3

2

1

No. of contacts

indicator

No. of contacts

indicator

Unit : mm

Part No.

HRS No.

No. of Contacts

A

B

Part No.

HRS No.

No. of Contacts

A

B

DF22-2RS/P-7.92 680-1209-7

DF22-3RS/P-7.92 680-1210-6

DF22-4RS/P-7.92 680-1211-9

DF22-5RS/P-7.92 680-1212-1

2

3

4

5

15.50 7.92 DF22B/C-2RS/P-7.92

23.42 15.84 DF22B/C-3RS/P-7.92

31.34 23.76 DF22B/C-4RS/P-7.92

39.26 31.68 DF22B/C-5RS/P-7.92

680-1200-2

680-1201-5

680-1202-8

680-1203-0

2

3

4

5

15.50 7.92

23.42 15.84

31.34 23.76

39.26 31.68

DF22-*S-7.92C For Standard height, standard lock

(Type I)

* indicates number of contacts.

DF22B-*S-7.92C For Long type, standard lock (Type III)

DF22C-*S-7.92C Long type, enhanced ergonomic lock (Type IV)

DF22-*EP-7.92C

Applicable Socket

DF22A-*EP-7.92C

* indicates number of contacts.

Note : Bag packaging (100 pcs/pack). Order by number of

packs.

Note 1 : Bag packaging (100 pcs/pack). Order by number of packs.

Note 2 : When connecting retainer into the plug housing, please

note the cavity numbers will line up numerieally, but the

retainer cavity numbers will be upside down compared to

the plug cavity numbers.

9

DF22 Series●7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)

■Crimp Contact for Socket

For 14 to 16 AWG

For 10 to 12 AWG

4.7

2.8

4.7

2.8

3.8

P=16.5

t=0.4

P=15.5

t=0.3

Applicable cable

Jacket diameter Wire size

Ø2.4 to 3.0mm 16 AWG, 14 AWG 26/0.254mm,41/0.26mm

Part No.

HRS No.

Packaging

Finish

UL style

Stranded wire conductor

DF22-1416SCF

DF22-1416SC

680-1000-3

680-1001-6

680-1002-9

680-1003-1

680-1089-7

680-1090-6

680-1085-6

680-1087-1

2500/reel

100/pack

2000/reel

100/pack

2000/reel

100/pack

2500/reel

2000/reel

1430

Ø2.6mm

16 AWG

14 AWG

12 AWG

10 AWG

16 AWG

14 AWG

12 AWG

10 AWG

26/0.254mm

41/0.26mm

65/0.26mm

104/0.26mm

26/0.254mm

41/0.26mm

65/0.26mm

104/0.26mm

DF22A-1416SCF

DF22A-1416SC

DF22A-1012SCF

DF22A-1012SC

DF22-1416SCFA

DF22A-1416SCFA

Ø3.0 to 3.8mm

Ø3.2mm,Ø3.7mm

Ø3.6 to 4.9mm

Ø4.04mm,Ø4.69mm

Ø2.4 to 3.0mm

Ø3.0 to 3.8mm

Tin plated

1015

1430

1015

Gold plated

DF22A-1012SCFA

680-1106-4

Ø3.6 to 4.9mm

2000/reel

Note 1 : The conductor of applicable wire is tin plated annealed copper.

Note 2 : When using other than the applicable wire, contact your nearest Hirose representative.

Note 3 : Strip length : 3.5 to 4.5mm

■Crimp Contact for In-line Plug

4.7

3.8

2.8

1.6

0.8

1416

P=15.5

t=0.3

Applicable cable

Part No.

HRS No.

Packaging

Finish

UL style

1430

Jacket diameter

Wire size

Stranded wire conductor

DF22-1416PCF

DF22-1416PC

680-1078-0

680-1080-2

680-1079-3

680-1081-5

680-2002-4

Ø2.4 to 3.0mm 16 AWG, 14 AWG 26/0.254mm,41/0.26mm

2500/reel

100/pack

2000/reel

100/pack

2500/reel

Ø2.6mm

16 AWG

26/0.254mm

Tin plated

DF22A-1416PCF

DF22A-1416PC

DF22-1416PCFA

Ø3.0 to 3.8mm

Ø3.2mm,Ø3.7mm

Ø2.4 to 3.0mm

1015

1430

16 AWG

14 AWG

26/0.254mm

41/0.26mm

Gold plated

Note 1 : The conductor of applicable wire is tin plated annealed copper.

Note 2 : When using other than the applicable wire, contact your nearest Hirose representative.

Note 3 : Strip length : 3.5 to 4.5mm

10

DF22 Series●7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)

BMated Dimensions

●Socket to Straight Header Connection

●Socket to Right Angle Header

Connection

1 Pos.

(31.6)

(12.45)

(13.5)

DF22--/1RS/P--7.92

DF22B#--1S--7.92C

DF22B/C--1RS/P--7.92

(29.6)

DF22#--*S--7.92C(28)

DF22--*RS/P--7.92

DF22#--1S--7.92C(28)

DF22C#--1S--7.92C

DF22#--1P--7.92DSA(**)

DF22#--*P--7.92DS(**)

(34.6)

(32.6)

DF22B#--*S--7.92C

DF22C#--*S--7.92C

DF22#--1P--7.92DSA(**)

DF22#--*P--7.92DS(**)

2 to 5 Pos.

DF22B/C--*RS/P--7.92

(13.5)

(12.45)

DF22B/C--*RS/P--7.92

DF22--*RS/P--7.92

DF22B#--*S--7.92C

DF22C#--*S--7.92C

DF22#--*S--7.92C(28)

DF22#--*P--7.92DSA(**)

●Socket to In-line Plug (Panel lock type)

●Socket to In-line Plug Connection

Connection

(44.55)

(40.55)

DF22#--*S--7.92C(28)

DF22#--*EP--7.92C

DF22A#--*EP--7.92C

DF22--RS/P--7.92

DF22--*RS/P--7.92C

DF22B/C---*RS/P--7.92

DF22B/C--*RS/P--7.92

(47.55)

(43.55)

DF22B#--*S--7.92C

DF22C#--*S--7.92C

DF22B#--*S--7.92C

DF22C#--*S--7.92C

(43.55)

DF22#--*EP--7.92C

DF22A#--*EP--7.92C

DF22B/C--*RS/P--7.92

●In-line Double-row socket to In-line

Double-row Plug Connection

●In-line Double-row socket to In-line Double-row

Plug (Panel lock type) Connection

(43.55)

DF22B#--4DS--7.92C

DF22A#--4DEP--7.92C

DF22#--4DEP--7.92C

DF22C#--4DS--7.92C

(43.55)

DF22C#--4DS--7.92C

DF22A#--4DEP--7.92C

DF22#--4DEP--7.92C

11

DF22 Series●7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)

BTools

Type

Item

Part No.

CM-105C

HRS No.

Applicable Contacts

DF22/DF22A-1416SCF/PCF/SCFA

DF22-1416SCF/PCF/SCFA/PCFA

DF22A-1416SCF/PCF/SCFA

DF22-1416SCF/PCF/SCFA/PCFA

DF22A-1416SCF/PCF/SCFA/PCFA

DF22A-1012SCF/SCFA

DF22-1416SCF/DF22-1416PCF

DF22A-1416SCF/DF22A-1416PCF

DF22A-1012SCF

901-0001-0

901-4576-7

901-4578-2

901-4579-5

901-4580-4

901-4582-0

Press unit

Applicators are used in automatic crimping

machines manufactured by Hirose Electric

AP105-DF22-1416

AP105-DF22A-1416

AP109A-DF22-1416

AP109A-DF22A-1416

AP109A-DF22A-1012

CHS893800H-UP

Applicators are used in automatic

Automatic crimping machines manufactured by

other companies

Applicator manufactured by

JAPAN AUTOMATIC MACHINE

CHS893900H-UP

QHS895800H-UP

HT104/DF22-1416

HT104/DF22A-1416

HT103/DF22A-1012

550-0285-0

550-0286-2

550-0288-8

DF22-1416SC/PC

DF22A-1416SC/PC

DF22A-1012SC

Manual

Crimp tools

Note 1 : When crimping contact DF22A-1012SCF use a press with 3.5 ton min.

Note 2 : AP109A type applicators cannot be used with the CM-105C press.

Note 3 : Any problems that occur from using tools other than those speciﬁed by Hirose, are not covered by warranty.

Note 4 : Applicator manufactured by JAPAN AUTOMATIC MACHINE (J.A.M.). Please access to HP of J.A.M., if you make inquiries

about the applicator or crimp defect. (URL : http://www.jam-net.co.jp)

Note 5 : Please follow the "Crimping quality standards" and "Table of crimping conditions" when crimping contacts.

BContact Extraction

■ Contact extraction tool : Flat-bladed screwdriver, 1.4mm blade width

■ Intended crimp Contacts : DF22-1416SC(F), DF22-1416SCFA, DF22A-1416SC(F),

DF22A-1416SCFA, DF22A-1012SC(F), DF22A-1012SCFA,

DF22-1416PC(F), DF22-1416PCFA, and DF22A-1416PC(F)

■ Work Method

(Housing Cross-

Sectional Diagram)

(1)

1. Refer to the drawing No. 1. Insert

correct size screwdriver in the

housing against the molded-in lance.

Push down the lance as shown.

Flat-bladed screwdriver

Molded-in lance

(2)

2. Assure that the lance is deflected

to release the contact and pull- out

wire with the crimped contact.

Note : Please do not reuse the reparred housing. Replace it to new one.

Caution

There are parts on the crimp contact that can cause injuries, please use caution when unmating the contacts.

BPrecautions

●The connector could be damaged if it is pulled out forcibly. When it is hard to pull out, push it in slightly first and then

depress the lock and un- mate.

●When thick, short sections of wire are used, the connector could be deformed due to the force of the wires’ position.

Route cables not to twist when being installed.

●Incomplete insertion of the contact can be prevented by mounting a retainer; however, mounting of a retainer might not

be possible when the contact protrudes beyond the socket. Insert the contact securely and then mount the retainer.

Please refer to the documents "Cable assembly Procedure", "Crimp condition" and "Crimp quality standards" for

the cable assembly procedures.

●

Please refer to the "Nylon Connector Guide" for handling instructions.

●

BCurrent Ratings

The current rating listed in the catalog indicates the allowable current per contact. However, in applications requiring

current transmission through all the contacts, about one-third of the listed rating should be applied.

When the current rating for the connector is 3A, and the allowable current of the conductor being used is 1A, then rating

of 1A will be used for the entire assembly.

The connectors should not be mating / unmating when the electrical current is being applied.

Hot swap should not be performed.

BUsage Environment

Please contact us about use in equipment that is subjected to repetitive high temperature and low temperature

environmental conditions.

®

2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN

+

TEL: 81-45-620-3526 Fax: 81-45-591-3726

http://www.hirose.com

http://www.hirose-connectors.com

The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.

The contents of this catalog are current as of date of 07/2017. Contents are subject to change without notice for the purpose of improvements.

12


型号：	DF22-4P-7.92DS(05)
厂家：	HRS
描述：	Board Connector, 4 Contact(s), 1 Row(s), Male, Right Angle, Solder Terminal, ROHS COMPLIANT PC 连接器
文件：	总12页 (文件大小：596K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

DF22-4P-7.92DS(05) [HRS]

相关型号：

DF22-4P-7.92DS(06)

DF22-4P-7.92DSA

DF22-4P-7.92DSA(05)

DF22-4P-7.92DSA(25)

DF22-4RS/P-7.92

DF22-4S-7.92C

DF22-4S-7.92C(28)

DF22-4S-7.92C28

DF22-4S-7.92DS

DF22-4S-7.92DSA

DF22-5DEP-7.92C

DF22-5DEP-7.92DS