DF33C [HRS]
3.3mm Pitch Small Size Connectors for Internal Power Source;
| 型号： | DF33C |
| 厂家： | 
HRS |
| 描述： | 3.3mm Pitch Small Size Connectors for Internal Power Source |
| 文件： | 总8页 (文件大小：375K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
3.3mm Pitch Small Size Connectors for Internal Power Source
DF33C Series
Positive
Lock
Completely enclosed
locking system
Protection from
shorts circuits
between adjacent
contacts
Fig.1
Features
1. 5 Amps capacity
Keying for multiple use
Standard type (Resin:White)
When used with 20 AWG wire, this connector has a
maximum capacity of 5A.
(For rated current with other types of wires, please refer to
the table on the next page)
2. Secure lock mechanism
Outer locking mechanism prevents accidental unmating due
to external shocks or drops. (Fig.1)
3. Incorrect mating prevention
Two different housings, a standard and R type, are available
to ensure mis-mating does not occur when using multiple
DF33C connectors on the same design. (Fig.2)
R type (Resin: Black)
4. Accurate board placement
Guide posts are used to help with board placement and
prevent incorrect mating to the PCB.
5. Supports resin sealing
Accepts resin sealing up to 6.5mm without affecting the
performance.
* The image on the left show header (the board
dip side), the image on the right show the
socket (cabel side).
* This guide key position is indicated in position
facing the mating surface of the header.
6. Short circuit prevention
The housing protects each contact by enclosing them in a “box”
which also makes each contact independent of each other.
This design prevents short circuits between adjacent contacts.
7. Excellent contact retention
A retainer is available to increase contact/cable retention and
to assure complete contact insertion. The retainer should
also be used when any mechanical stress cold be applied to
the cable.
Fig.2
8. Prevents solder cracking
To avoid solder crack, a glass-filled resin is used in the
header housing to decrease thermal shrinkage.
9. Easy mating operation
A clear tactile click is delivered upon the completion of the
mating process. This simplifies mating and increases work
efficiency, especially when operating in a noisy environment.
10. Glow Wire compliance (Compliant with IEC 60695-2-11)
1
2015.11t
DF33C Series●3.3mm Pitch Small Size Connectors for Internal Power Source
Product Specifications
Rated No. of rows No. of Contacts 20 AWG
22 AWG Operating Temperature Range -35 to +85ç (Note 2)
Current
(Note 1)
Rated
1
2
2 to 6 contacts
4 to 12 contacts
5A
5A
5A
4A
Operating Humidity Range
Storage Temperature Range -10 to +60ç (Note 4)
40 to 80% (Note 3)
Ratings
AC/DC 500V
Storage Humidity Range 40 to 70% (Note 4)
Voltage
Items
Specifications
Conditions
1. Contact Resistance
2. Insulation Resistance
3. Withstanding Voltage
No more than 10mø (initially)
Measured at 20mV or below and 1mA
Measured at DC 500V
No less than 1,000Mø
No flashover or breakdown
Apply AC 1500V for one minute
4. Contact Insertion and
Extraction Forces
0.5N Min, 4.5N Max
Measured with a 0.5 0.002 steel pin
30 mating cycles
5. Durability
Contact Resistance : no more than 20mø
No electrical discontinuity of 1µs or greater
Frequency 10-55Hz, half amplitude 0.75mm,
3 directions, 10 times each
6. Vibration Resistance
Acceleration : 490m/s2, 11ms, Semi-sinusoidal
3 direction 3 times each.
7. Shock Resistance
8. Moisture-resistance
9. Temperature Cycles
No electrical discontinuity of 1µs or greater
Contact Resistance : no more than 20mø
Insulation Resistance : no less than 500Mø
Left at temperature 40 2ꢀC, humidity 90 to
95%, 96 hours
Contact Resistance : no more than 20mø
Insulation Resistance : no less than 1000Mø
-55ꢀC : 30 minutes 85ꢀC : 30 minutes
→
5 cycles
Hand solder : Soldering
Flow : 260ꢀC, 10 sec. iron temperature,
300ç, 3 sec.
10. Soldering Heat
Resistance
The resin parts should withstand the temperature
and resist melting.
Note 1 : This is the maximum current rating while all pins are powered or used as all power lines.
If you split the current over multiple lines, please factor in your own safety margin. Please contact Hirose Electric for
inquiries on the assignment of pins and on the currents that can be delivered.
Note 2 : Includes temperature rise caused by current flow.
Note 3 : The connector should be completely dry. (no condensation present)
Note 4 : The term “storage” refers to the long-term storage condition of unused products before PCB mounting.
The operating temperature and humidity ranges are applied while in a non-energized state, while in transport or after PCB
mounting.
Materials / Finish
Product
Component
Materials
Finish
UL rating
Crimp socket
Crimp contact
Insulator
Contact
Insulator
Contact
Insulator
PBT
Copper alloy
PBT
White (Note 1)
Tin plating
White (Note 1)
Tin plating
Black
UL94V-0
---------------
UL94V-0
---------------
Pin header
Brass
PBT
Retainer
UL94V-0
Note 1 : Resin color of different guide key type (DF33CR) is black.
Product Number Structure
Connector
Contact
DF33C R − 2 S − 3.3 C
DF33A − 2022 SCF
Series Name : DF33C
Guide key shape
Connector type
Termination/terminal shape
: Crimp housing
S
: Single row socket
C
None : Standard (Resin color : White)
R : Different guide key type
(Resin color : Black)
DS : Double row socket
DSA : Straight pin header
Blank : Retainer
Applicable wire size
2022 : 20 to 22 AWG
Packing type
SCF : Socket contact / reel
SC : Socket contact / pack
P
: Single row pin header
DP : Double row pin header
RS : Single row retainer
RDS : Double row retainer
Contact pitch : 3.3 mm
No. of contacts
:
:
2 to 6 (single row product)
4 to 12 (double row product)
2
DF33C Series●3.3mm Pitch Small Size Connectors for Internal Power Source
A
CAV No.
B
P=3.3
Single row straight pin header
HRS logo mark
Lot No. mark
Polarity mark
0.5
1.55
Standard type (Resin:White)
No.of
[Specification No.]
(24): Tin plating, tray package specification
Part No.
HRS No.
A
B
Packing
Contacts
DF33C-2P-3.3DSA(24) 676-1131-2 24
DF33C-3P-3.3DSA(24) 676-1132-5 24
DF33C-4P-3.3DSA(24) 676-1133-8 24
DF33C-5P-3.3DSA(24) 676-1134-0 24
DF33C-6P-3.3DSA(24) 676-1135-3 24
2
3
4
5
6
8.4 3.3 135pcs/tray
11.7 6.6 95pcs/tray
15.0 9.9 75pcs/tray
18.3 13.2 60pcs/tray
21.6 16.5 50pcs/tray
R type
(Different guide key type. Resin color: Black)
Available upon request.
Please contact your local Hirose sales representative.
Recommended PCB layout
Dimensions in mated condition
Application figure
(Recommended PCB thickness t=1.6 0.1)
B
0.05
DF33C-*RS-3.3
P=3.3 0.05
DF33C(R)-*S-3.3C
1.55 0.05
DF33C(R)-*P-3.3DSA(24)
Note : The retainer can be used on both the standard and R type housings.
Double row, straight pin header
A
B
P=3.3
CAV No.
HRS logo mark
Polarity mark
Lot No. mark
0.5
Ø1.25
Standard type (Resin color:White)
[Specification No.]
(24): Tin plating, tray package
specification
No.of
Packing
Part No.
HRS No.
A
B
Contacts
1.55
DF33C-4DP-3.3DSA(24)
DF33C-6DP-3.3DSA(24)
DF33C-8DP-3.3DSA(24)
676-1113-0 24
676-1114-3 24
676-1115-6 24
4
6
8
8.4 3.3 135pcs/tray
11.7 6.6 95pcs/tray
15.0 9.9 75pcs/tray
R type
(Different guide key type. Resin color: Black)
Available upon request.
Please contact your local Hirose sales representative.
DF33C-10DP-3.3DSA(24) 676-1116-9 24
DF33C-12DP-3.3DSA(24) 676-1117-1 24
10 18.3 13.2 60pcs/tray
12 21.6 16.5 50pcs/tray
Recommended PCB layout
Application figure
DF33C-*RDS-3.3
(Recommended PCB thickness t=1.6 0.1)
B
0.05
DF33C(R)-*DS-3.3C
P=3.3 0.05
DF33C(R)-*DP-3.3DSA(24)
1.55 0.05
Note : The retainer can be used on both the standard and R type housings.
3
DF33C Series●3.3mm Pitch Small Size Connectors for Internal Power Source
Single row socket
A
B
P=3.3
HRS logo mark
CAV No.
Polarity mark
Contact No.1
Standard type (Resin color:White)
*For the retainers, please refer to page 5.
Part No.
HRS No.
No.of Contacts
A
B
Packing
DF33C-2S-3.3C
DF33C-3S-3.3C
DF33C-4S-3.3C
DF33C-5S-3.3C
DF33C-6S-3.3C
676-1136-6 00
676-1137-9 00
676-1138-1 00
676-1139-4 00
676-1140-3 00
2
3
4
5
6
7.8
3.3
11.1 6.6
14.4 9.9
17.7 13.2
21.0 16.5
100pcs/
pack
R type
(Different guide key type. Resin color: black)
Available upon request.
Please contact your local Hirose sales representative.
Double row socket
A
B
P=3.3
HRS logo mark
Polarity mark
CAV No.
Contact No.1
Contact No.2
Standard type (Resin color:White)
*For the retainers, please refer to page 5.
Part No.
HRS No.
No.of Contacts
A
B
Packing
DF33C-4DS-3.3C
DF33C-6DS-3.3C
DF33C-8DS-3.3C
DF33C-10DS-3.3C
DF33C-12DS-3.3C
676-1119-7 00
676-1120-6 00
676-1121-9 00
676-1122-1 00
676-1123-4 00
4
6
7.8
3.3
11.1 6.6
14.4 9.9
17.7 13.2
21.0 16.5
100pcs/
pack
8
10
12
R type
(Different guide key type. Resin color: black)
Available upon request.
Please contact your local Hirose sales representative.
4
DF33C Series●3.3mm Pitch Small Size Connectors for Internal Power Source
Single row retainer
A
B
P=3.3
CAV No.
HRS logo mark
Part No.
HRS No.
No.of Contacts
A
B
Packing
DF33C-2RS-3.3
DF33C-3RS-3.3
DF33C-4RS-3.3
DF33C-5RS-3.3
DF33C-6RS-3.3
676-1141-6 00
676-1142-9 00
676-1143-1 00
676-1144-4 00
676-1145-7 00
2
3
4
5
6
6.2
9.5
3.3
6.6
100pcs/
pack
12.8 9.9
16.1 13.2
19.4 16.5
Double row retainer
A
P=3.3
CAV No.
HRS logo mark
B
0.65
Part No.
HRS No.
No.of Contacts
A
B
Packing
DF33C-4RDS-3.3
DF33C-6RDS-3.3
DF33C-8RDS-3.3
DF33C-10RDS-3.3
DF33C-12RDS-3.3
676-1125-0 00
676-1126-2 00
676-1127-5 00
676-1128-8 00
676-1129-0 00
4
6
3.3
8.0
6.6 11.3
9.9 14.6
13.2 17.9
16.5 21.2
100pcs/
pack
8
10
12
5
DF33C Series●3.3mm Pitch Small Size Connectors for Internal Power Source
Operating Precautions
These connectors can become damaged if excessive force is applied during extraction. If you experience difficulty
when unmating this connector, gently push it further into the housing and then operate the lock and release the
connector.
When performing a resin sealing, pay attention to the surface tension of the resin and fill accordingly.
Wire routing inside the device can cause added tension to be applied to the contacts. Use of a retainer will help
remedy the stress placed on the contact.
Prior to reusing a terminated wire, make sure that the contact’s lance is raised to the proper height.
There may be a slight variance in the color of the molding between production lots, this variance will not affect the
performance of the connector.
Please refer to the documents "Cable assembly Procedure", "Crimp condition" and "Crimp quality standards" for
the cable assembly procedures.
Please refer to the "Nylon Connector Guide" for handling instructions.
Ratings
If the connector is rated at 3A, and the wire used with the connector only has a 1A capacity, the connection will be
regarded as a 1A connection. Please make sure that you do not place too much current through this connector.
Even though the connector may be rated to take the current applied to it, currents are not always distributed equally
due to the differences in wiring path or contact resistance. Due to this precaution, the current may exceed the
ratings previously discussed. In these cases, use 1/3 of the noted rating as the maximum. Do not mate/unmate this
connector when energized with a live current
(Note 1) “Live” mating and unmating is defined as "to conduct the mating and unmating process while the system is
conducting electricity"
Usage Under Harsh Environments
When using these connectors in a harsh environment such as one with repeated high and low temperatures, please
contact us for advice.
7
DF33C Series●3.3mm Pitch Small Size Connectors for Internal Power Source
USA:
USA:
USA:
HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS
580 Waters Edge Lane, Suite 205
Lombard, IL 60148
HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE HIROSE ELECTRIC (U.S.A.), INC. CHICAGO OFFICE
2841 Junction Ave, Suite 200
San Jose, Ca. 95134
2300 Warrenville Road, Suite 150, Downers
Grove, Illinois 60515
Phone : +1-630-282-6700
http://www.hirose.com/us/
Phone : +1-408-253-9640
Fax : +1-408-253-9641
http://www.hirose.com/us/
Phone : +1-630-282-6700
http://www.hirose.com/us/
USA:
THE NETHERLANDS:
GERMANY:
HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE) HIROSE ELECTRIC EUROPE B.V.
17197 N. Laurel Park Drive, Suite 253, Livonia, Hogehillweg #8 1101 CC Amsterdam Z-O
HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH
Herzog-Carl-Strasse 4 D-73760 Ostfildern
(Scharnhauser Park)
Phone : +49-711-4560-02-1
Fax : +49-711-4560-02-299
http://www.hirose.com/eu/
MI 48152
Phone : +31-20-6557460
Fax : +31-20-6557469
http://www.hirose.com/eu/
Phone : +1-734-542-9963
Fax : +1-734-542-9964
http://www.hirose.com/us/
GERMANY:
GERMANY:
FRANCE:
HIROSE ELECTRIC EUROPE B.V. NUERNBERG OFFICE HIROSE ELECTRIC EUROPE B.V. HANOVER OFFICE
HIROSE ELECTRIC EUROPE B.V. PARIS OFFICE
Muggenhofer Str. 136 90429 Nuernberg
Phone : +49-911 32 68 89 63
Fax : +49-911 32 68 89 69
Bayernstr. 3, Haus C 30855 Langenhagen, Germany Regus La Garenne Colombes,Place de La Belgique,
Phone : +49-511 97 82 61 30
Fax : +49-511 97 82 61 35
http://www.hirose.com/eu/
71 Boulevard National La Garenne Colombes, 92250, France
Phone : +33 (0) 1 7082 3170
Fax : +33 (1) 7082 3101
http://www.hirose.com/eu/
http://www.hirose.com/eu/
UNITED KINGDOM:
CHINA:
CHINA:
HIROSE ELECTRIC EUROPE BV (UK BRANCH)
4 Newton Court, Kelvin Drive, Knowlhill,
Milton Keynes, MK5 8NH
Phone : +44-1908 202050
Fax : +44-1908 202058
HIROSE ELECTRIC (SHANGHAI) CO., LTD.
1601, Henderson Metropolitan, NO.300, East Nanjing A1001, Ocean International Center, Building 56# East 4th
Road, Huangpu District, Shanghai, China 200001
Phone : +86-21-6391-3355
Fax : +86-21-6391-3335
HIROSE ELECTRIC (SHANGHAI) CO.,LTD. BEIJING BRANCH
Ring Middle Road, ChaoYang District, Beijing, 100025
Phone : +86-10-5165-9332
Fax : +86-10-5908-1381
http://www.hirose.com/eu/
http://www.hirose.com/cn/
http://www.hirose.com/cn/
CHINA:
HONG KONG:
TAIWAN:
HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD. HIROSE ELECTRIC HONGKONG TRADING CO., LTD. HIROSE ELECTRIC TAIWAN CO., LTD.
Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre, Room 1001, West Wing, Tsim Sha Tsui Centre, 66 103 8F, No.87, Zhengzhou Rd., Taipei
5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 518008
Phone : +86-755-8207-0851
Fax : +86-755-8207-0873
Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong Phone : +886-2-2555-7377
Phone : +852-2803-5338
Fax : +852-2591-6560
Fax : +886-2-2555-7350
http://www.hirose.com/tw/
http://www.hirose.com/cn/
http://www.hirose.com/hk/
KOREA:
SINGAPORE:
INDIA:
HIROSE KOREA CO., LTD.
HIROSE ELECTRIC SINGAPORE PTE. LTD.
HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE
250, Huimanggongwon-ro, Siheung-si,
Gyeonggi-do, Korea, 429-849
Phone : +82-31-496-7000,7124
Fax : +82-31-496-7100
10 Anson Road #26-16, International Plaza Office NO.519, Regus-Green Boulevard, Level5, Tower C,
079903, Singapore
Phone : +65-6324-6113
Sec62, Plot B-9A, Block B, Noida, 201301, Uttar Pradesh, India
Phone : +91-12-660-8018
65-6324-6123
Fax : +
Fax : +91-120-4804949
http://www.hirose.com/sg/
http://www.hirose.co.kr/
http://www.hirose.com/sg/
INDIA:
MALAYSIA:
THAILAND:
HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE HIROSE ELECTRIC SINGAPORE PTE. LTD.
HIROSE ELECTRIC SINGAPORE PTE. LTD.
Unit No-403, 4th Floor, No-84, Barton Centre, Mahatma 1-10-07, Suntech @ Penang Cybercity (1164),Lintang BANGKOK OFFICE (REPRESENTATIVE OFFICE)
Gandhi (MG) Road, Bangalore 560 001, Karnataka, India
Phone : +91-80-4120 1907
Fax : +91-80-4120 9908
Mayang Pasir 3,11950, Bayan Baru, Penang, Malaysia. Unit 4703, 47th FL., 1 Empire Tower, South Sathorn
Phone : +604-619-2564
Fax : +604-619-2574
Road, Yannawa, Sathorn, Bangkok 10120 Thailand
Phone : +66-2-686-1255
http://www.hirose.com/sg/
http://www.hirose.com/sg/
Fax : +66-2-686-3433
http://www.hirose.com/sg/
®
2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
+
+
TEL: 81-45-620-3526 Fax: 81-45-591-3726
http://www.hirose.com
http://www.hirose-connectors.com
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.
The contents of this catalog are current as of date of 11/2015. Contents are subject to change without notice for the purpose of improvements.
8
相关型号：
DF33C-10DP-3.3DSA(24)
Board Connector, 10 Contact(s), 2 Row(s), Male, Straight, 0.129 inch Pitch, Solder Terminal, Locking, Black Insulator, Plug
HRS
©2020 ICPDF网 联系我们和版权申明