DF37B-30DP-0.4V(74) [HRS]
Board Stacking Connector;型号: | DF37B-30DP-0.4V(74) |
厂家: | HRS |
描述: | Board Stacking Connector |
文件: | 总10页 (文件大小:1139K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
0.4 mm Pitch, 0.98 mm Mated Height, Board-to-Board / Board-to-FPC Connectors
DF37 Series
■Further reduction of the board space.
●Comparison of board mounting space
40 positions, 0.4 mm pitch, 0.98 mm height
DF30
DF37
10.22mm
■Features
Header
1. Reduced size and board-occupied area
With the mated height of 0.98 mm, width of 2.98mm and
length of 10.22 mm (40 positions) the connectors are one of
the smallest in its class.
Sufficiently large flat areas allow pick-up with vacuum
nozzles of automatic placement equipment.
2. Reliable electrical and mechanical connection
Despite its small mated height, unique contact configuration,
with a 2-point contacts and effective mating length of
0.25mm, assures highly reliable connection while confirming
a complete mating with a definite tactile feel.
Receptacle
Lock
3. Self alignment
●Splatter protection
Recognizing the difficulties of mating extremely small
connectors in limited spaces, the connectors will self-align
within 0.3mm.
Contact areas
4. Physical shock and vibration protection
2-point contact assures electrical connection in a shock or
vibration applications.
5. Solder wicking prevention
Nickel barriers (receptacles) and unique forming of the contacts
(receptacles) prevent un-intentional solder wicking.
Contact areas are not exposed to the outside
penetration of the flux or other physical particles.
6. Contamination protection
Insulator walls protect the contact areas against flux splatter or
other physical particles contamination.
Contact areas
7. RoHS compliant
All components and materials comply with the requirements of
EU Directive 2002/95/EC.
■Applications
Mobile phones, digital cameras, digital camcorders and
other thin portable devices requiring high reliability board-to-
board/ board-to-FPC connections.
A273
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
DF37 Series●0.4 mm Pitch, 0.98 mm Mated Height, Board-to-Board / Board-to-FPC Connectors
■Specifications
Operating
temperature range
Storage
temperature range
-35°C to +85°C (Note 1)
-10°C to +60°C (Note 2)
RH 40% to 70% (Note 2)
Current rating
0.3 A
Ratings
Operating
humidity range
Storage
humidity range
RH 20% to 80%
Voltage rating 30 V AC, DC
Item
Specification
Conditions
1.Insulation resistance 500 Mø min
2.Withstanding voltage No flashover or insulation breakdown
100 V DC
100 V AC / 1minute
20 mV AC, 1 kHz, 1 mA
3.Contact resistance
100 mø max.
No electrical discontinuity of 1 μs or longer
No damage or parts dislocation
Frequency: 10 to 55 Hz, single amplitude of 0.75
mm, 2 hours, 3 axis
4.Vibration
Contact resistance: 100 mø max.,
Insulation resistance: 25 Mø min.
96 hours at 40 2°C and humidity of 90 to 95%
No damage or parts dislocation
5.Humidity
Contact resistance: 100 mø max.,
Insulation resistance: 50 Mø min.
No damage or parts dislocation
Contact resistance: 100 mø max.
-55°C ➝ 5 to 35°C ➝ 85°C ➝ 5 to 35°C
Time: 30 min. ➝ 10 min. ➝ 30 min. ➝ 10 min.
5 cycles
10 cycles
6.Temperature cycle
7.Durability
8.Resistance to
soldering heat
No deformation of components affecting
performance
Reflow: At the recommended temperature profile
Manual soldering: 350°C for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" here refers to products stored for a long period prior to board mounting and use.
The operating temperature and humidity range covers the non-conducting condition of connectors after board mounting
and the temporary storage conditions of transportation, etc.
Note 3: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and
specifications for a specific part number shown.
■Materials
Receptacle
Part
Material
LCP
Finish
Remarks
UL94V-0
Color: Black
Insulator
Header
Part
Material
Finish
Remarks
Phosphor bronze
Gold plated
---------------
Contacts
■Ordering information
●Receptacles / Headers
*
3
DF 37 C -
DS - 0.4 V (51)
1
2
4
5
6
7
1
2
4
Series name
Configuration
: DF37
Connector style
DS: Receptacle
DP: Header
B: with metal fittings, no bosses
5
6
7
C: without metal fittings, no bosses
Number of contacts
Contact pitch : 0.4 mm
3
Terminal type V: SMT vertical mount
Packaging
10, 16, 20, 24, 30, 40, 50, 60
(51): Embossed tape packaging (8,000 pieces per reel)
(53): Embossed tape packaging (1,000 pieces per reel)
A274
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
DF37 Series●0.4 mm Pitch, 0.98 mm Mated Height, Board-to-Board / Board-to-FPC Connectors
■Receptacles
A
B
P=0.4
Vacuum pick-up area:C
0.15
0.96
BRecommended metal mask dimensions BRecommended PCB mounting pattern
E+0.05
E +0.05
0
0
0
0
D-0.05
D -0.05
B
0.02
B
0.02
P=0.4 0.02
P=0.4 0.02
0.23 0.02
0.23 0.01
All dimensions: mm
Part Number
CL No.
Number of Contacts
A
B
C
D
E
RoHS
DF37B-10DS-0.4V(51)
DF37B-16DS-0.4V(51)
DF37B-20DS-0.4V(51)
DF37B-24DS-0.4V(51)
DF37B-30DS-0.4V(51)
DF37B-40DS-0.4V(51)
DF37B-50DS-0.4V(51)
DF37B-60DS-0.4V(51)
684-3036-7-51
684-3055-1-51
684-3000-0-51
684-3001-2-51
684-3002-5-51
684-3003-8-51
684-3004-0-51
684-3005-3-51
10
16
20
24
30
40
50
60
4.22
5.42
6.22
7.02
8.22
10.22
12.22
14.22
1.6
2.8
3.6
4.4
5.6
7.6
9.6
11.6
0.8
1.2
1.6
2
3.7
4.9
5.7
6.5
7.7
9.7
11.7
13.7
4.46
5.66
6.46
7.26
8.46
10.46
12.46
14.46
YES
2
2.4
2.8
3.2
Note 1: Tape and reel packaging (8,000 pieces/reel).
Order by number of reels.
Note 2: This connector is NOT polarized.
A275
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
DF37 Series●0.4 mm Pitch, 0.98 mm Mated Height, Board-to-Board / Board-to-FPC Connectors
■Headers
A
B
P=0.4
0.15
Vacuum pick-up area:C
BRecommended metal mask dimensions BRecommended PCB mounting pattern
E+0.05
E+0.05
0
0
0
0
D -0.05
D -0.05
B
0.02
B
0.02
P=0.4 0.02
P=0.4 0.02
0.23 0.02
0.23 0.02
All dimensions: mm
Part Number
CL No.
Number of Contacts
A
B
C
D
E
RoHS
DF37B-10DP-0.4V(51)
DF37B-16DP-0.4V(51)
DF37B-20DP-0.4V(51)
DF37B-24DP-0.4V(51)
DF37B-30DP-0.4V(51)
DF37B-40DP-0.4V(51)
DF37B-50DP-0.4V(51)
DF37B-60DP-0.4V(51)
684-3037-0-51
684-3057-7-51
684-3008-1-51
684-3009-4-51
684-3010-3-51
684-3011-6-51
684-3012-9-51
684-3013-1-51
10
16
20
24
30
40
50
60
3.14
4.34
5.14
5.94
7.14
9.14
11.14
13.14
1.6
2.8
3.6
4.4
5.6
7.6
9.6
11.6
0.8
1.2
1.6
2
2.62
3.82
4.62
5.42
6.62
8.62
10.62
12.62
3.38
4.58
5.38
6.18
7.38
9.38
11.38
13.38
YES
2
2.4
2.8
3.2
Note 1: Tape and reel packaging (8,000 pieces/reel).
Order by number of reels.
Note 2: This connector is NOT polarized.
A276
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
DF37 Series●0.4 mm Pitch, 0.98 mm Mated Height, Board-to-Board / Board-to-FPC Connectors
■Packaging Specifications
B
Embossed Carrier Tape Dimensions
●Receptacle (20 and above positions)
E-E
1.23 0.15
0.3 0.1
8
0.1
2
0.1 4 0.1
E
E
F
F
F-F
Unreeling direction
BEmbossed Carrier Tape Dimensions
●Receptacle (less than 20 positions)
A-A
8
0.1
2
0.1
4
0.1
1.23 0.1
0.3 0.05
A
B
B
A
Unreeling direction
B-B
A277
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
DF37 Series●0.4 mm Pitch, 0.98 mm Mated Height, Board-to-Board / Board-to-FPC Connectors
●Reel Dimensions
Unreeling direction
Part Number Label
C
D
0.5
1
All dimensions: mm
Part Number
A
B
C
D
DF37B-10DS-0.4V(51)
DF37B-16DS-0.4V(51)
DF37B-20DS-0.4V(51)
DF37B-24DS-0.4V(51)
DF37B-30DS-0.4V(51)
DF37B-40DS-0.4V(51)
DF37B-50DS-0.4V(51)
DF37B-60DS-0.4V(51)
7.5
16
16
16
16
24
24
24
24
17.5
17.5
17.5
17.5
25.5
25.5
25.5
25.5
21.5
21.5
21.5
21.5
29.5
29.5
29.5
29.5
7.5
7.5
7.5
11.5
11.5
11.5
11.5
Tape and reel packaging (8,000 pieces/reel).
A278
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
DF37 Series●0.4 mm Pitch, 0.98 mm Mated Height, Board-to-Board / Board-to-FPC Connectors
B
●Header
Embossed Carrier Tape Dimensions
E-E
0.15
0.3 0.1
1
8
0.1
2
0.1
4
0.1
E
E
F
F
Unreeling direction
F-F
●Reel Dimensions
Part Number Label
Unreeling direction
C
D
0.5
1
All dimensions: mm
Part Number
A
B
C
D
DF37B-10DP-0.4V(51)
DF37B-16DP-0.4V(51)
DF37B-20DP-0.4V(51)
DF37B-24DP-0.4V(51)
DF37B-30DP-0.4V(51)
DF37B-40DP-0.4V(51)
DF37B-50DP-0.4V(51)
DF37B-60DP-0.4V(51)
5.5
7.5
12
16
16
16
16
24
24
24
13.5
17.5
17.5
17.5
17.5
25.5
25.5
25.5
17.5
21.5
21.5
21.5
21.5
29.5
29.5
29.5
7.5
7.5
7.5
11.5
11.5
11.5
Tape and reel packaging (8,000 pieces/reel).
A279
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
DF37 Series●0.4 mm Pitch, 0.98 mm Mated Height, Board-to-Board / Board-to-FPC Connectors
BUsage Recommendations
1.Recommended temperature profile
Temperature (ꢀ)
250ꢀ
220ꢀ
250
200
150
100
60sec max
180ꢀ
150ꢀ
90~120sec
50
Room temperature
0
50
100
150
200
250
300
Time (sec.)
Note 1: Up to 2 cycles of Reflow soldering are possible under the
same conditions, provided that there is a return to normal
temperature between the first and second cycle.
Note 2: The temperature profile indicates the board surface
temperature at the point of contacts with the connector
terminals.
Manual soldering: 340 10ꢀ for 3 seconds
2.Recommended manual soldering
3.Recommended screen thickness and open
area ratio (Pattern area ratio)
4.Board warpage
Thickness: 0.12 mm
Open area ratio: Receptacle:80%, Plug: 70%
Maximum of 0.02 mm at the connector center, with both ends of the
connector as reference points.
Refer to “Nylon Connector Use Handbook”.
5.Cleaning conditions
6.Precautions
■ Mating and un-mating of the connectors when not soldered on the
boards is not recommended as this may cause deformation of the
terminals, damage to the contacts or insulators.
■ Mated connectors should not carry weight of the board by
themselves. Provide some other support of the boards.
■ When mating/un-mating do not twist or lift by the corners. Apply the
forces evenly across the entire length and width of the connectors
taking care NOT to damage or deform soldered terminations.
■ Exercise extreme caution when mating/ un-mating when the
connector is mounted on a nonrigid (flexible) substrate.
Slight discoloration on the insulating materials will not affect form,
fit or function of the connectors.
■ Do NOT pull on the flexible substrate.
A280
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
DF37 Series●0.4 mm Pitch, 0.98 mm Mated Height, Board-to-Board / Board-to-FPC Connectors
BHandling Precautions when Mating Connectors
DF37*-*DP-0.4V
Header
DF37*-*DS-0.4V
Receptacle
Keep the connectors parallel to each other
when positioning. The connectors will self-
align in horizontal directions.
Do not attempt to mate the connectors starting
at one end or side.
Press-down even until fully mated.
A281
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
DF37 Series●0.4 mm Pitch, 0.98 mm Mated Height, Board-to-Board / Board-to-FPC Connectors
BHandling Precautions When Un-mating Connectors
DF37*-*DP-0.4V
Header
Fully mated
DF37*-*DS-0.4V
Receptacle
Lift even, keeping both connectors parallel to
each other
When handling, circumstances may prevent
the connectors from being kept parallel when
un-mating. One end may be lifted as shown.
However, to use this procedure the connector
must be mounted on sufficiently rigid circuit
board.
Any deflection of the board during this opera-
tion may result in damage to the connector or
solder joints.
Pitch orientation
Do not attempt to start the un-mating of the
connectors from one side or corner.
Failure to exercise caution when un-mating
the connectors mounted on the non-rigid FPC
may also result in connector breakage.
It is the responsibility of the user to perform
verification of the repeated mating / un-mating
cycles with the connectors mounted on the
applicable FPC.
Corner orientation
Width orientation
When the rigidity of the FPC is low, there is a
risk that the connector could break as illustrat-
ed in the diagram at left.
Please use the connectors after performing a
check of repeated operation with the FPC that
the customer will be using.
Evaluative results of FPC rigidity and various
items are available. Please inquire.
A282
相关型号:
DF37B-30DS-0.4V(51)
Board Connector, 30 Contact(s), 2 Row(s), Female, Straight, 0.016 inch Pitch, Surface Mount Terminal, Locking, Black Insulator, Receptacle, ROHS COMPLIANT
HRS
DF37B-34DP-0.4V(51)
Board Connector, 34 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal
HRS
DF37B-40DP-0.4V(53)
Board Connector, 40 Contact(s), 2 Row(s), Male, Straight, 0.016 inch Pitch, Surface Mount Terminal, Black Insulator, Plug
HRS
DF37B-40DS-0.4V(51)
Board Connector, 40 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Receptacle, ROHS COMPLIANT
HRS
©2020 ICPDF网 联系我们和版权申明