DF38AJ-30S-0.3V(51) [HRS]

Board Connector;


型号：	DF38AJ-30S-0.3V(51)
厂家：	HRS
描述：	Board Connector 连接器
文件：	总12页 (文件大小：583K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

0.3 mm Pitch, 1.5 mm Mated Height, Board- to-Fine Coaxial Cable Connectors

DF38 Series

High contact reliability –

Effective mating length of 0.4 mm

3.7 0.15

ꢀ0.4ꢁ Effective mating length

■Features

Enhanced shielding

1. Small mated height and board occupied

space

Small pitch (0.3mm) and mated height (1.5mm)

allows use in space-restricted areas.

Plug’s height of 1.3mm and width of 2.38mm allow

its passage through narrow openings in small-

diameter hinge applications.

2. Enhanced shielding and ground connections

Metal shells on the plug and receptacle connect to

each other with a reliable multi-point ground

contacts, assuring reliable ground connection and

EMC protection.

3. Reliable lock

Fully mated condition is assured with reliable locks at

4 locations, confirming it with a distinct tactile click.

Multi-point ground contacts

4. Reliable electrical and mechanical

connection

4-point lock:

2 points at each end

Despite its small mated height, unique contact

configuration assures highly reliable connection,

with effective mating length of 0.4mm.

5. Solder wicking prevention

Nickel barriers prevent solder wicking in the critical

contact areas.

6. Durable plug construction

Formed metal shells on the top and side surfaces

form a strong and rigid assembly.

7. RoHS, Halogen-free*

*As defined by IEC61249-2-21

Br-900 ppm maximum,Cl-900 ppm maximum, Cl+Br

combined-1,500 ppm maximum

Distinct tactile click

■Connector for conductivity tests

We have a line-up of connectors for inspection,

usable for electrical testing of both plug and

receptacle connectors.

2014.3 w

DF38 Series●0.3 mm Pitch, 1.5 mm Mated Height, Board- to-Fine Coaxial Cable Connectors

■Specifications

AWG #42: 0.15 A

Wire size AWG #44: 0.1 A (Note.3)

AWG #46: 0.1 A

Operating temperature range

Operating humidity range

-35 to +85°C ꢀNote 1ꢁ

RH 20% to 80%

Current rating

Ratings

Storage temperature range

Storage humidity range

-10 to +60°C ꢀNote 2ꢁ

RH 40% to 70% ꢀNote 2ꢁ

Voltage rating

30 V AC

Item

Specification

Conditions

1.Insulation resistance 50Mø min

100V DC

2.Withstanding voltage No flashover or insulation breakdown

100 V AC / 1 minute

3.Contact resistance

Signal: 80mø max., Ground: 80mø max.

100mA ꢀDC or 1,000Hzꢁ

Frequency: 10 to 55 Hz, single amplitude of

0.75 mm, 3 directions, 2 hours

4.Vibration

No electrical discontinuity of 1 µs or longer

Contact resistance ꢀchange from initial valueꢁ

50 mø max.

Insulation resistance: 25 Mø min.

96 hours at of 40 2°C, and humidity of 90 to

95%

5.Humidity

-55°C ➝ 5 to 35°C ➝ 85°C ➝ 5 to 35°C

Time: 30 min. ➝ 2 to 3 min. ➝ 30 min. ➝ 2 to

3 min.

5 cycles

Contact resistance ꢀchange from initial valueꢁ

50 mø max.

Insulation resistance: 50 Mø min.

6.Temperature cycle

7.Durability

Contact resistance ꢀchange from initial valueꢁ

50 mø max.

30 cycles

Reflow: At the recommended temperature

profile

Manual soldering: 350°C for 3 seconds

8.Resistance to

soldering heat

No deformation of affecting performance

Note 1: Includes temperature rise caused by current flow.

Note 2: The term "storage" refers to products stored for a long period prior to mounting and use.

The operating temperature and humidity range covers the non-conducting condition of connectors after board mounting

and the temporary storage conditions of transportation, etc.

Note 3: With only the connector portion at an elevated temperature level, the rated current value is set.

■Material

Product

Part

Insulator

Contacts

Metal cover

Vacuum cap

Insulator

Contacts

Metal cover

Material

LCP

Finish

Color: Black

Gold plating

Tin plating

Remarks

UL94-V0

---------------

UL94-HB

UL94-V0

---------------

Receptacle

Phosphor bronze

Polyamide

LCP

Color: Black

Color: Natural, Black

Gold plating

Tin plating

Plug

Phosphor bronze

DF38 Series●0.3 mm Pitch, 1.5 mm Mated Height, Board- to-Fine Coaxial Cable Connectors

■Ordering information

●Connector

( )

DF 38 A J – * S – 0.3 V **

DF 38 J – * P – SHL

Series name : DF

Connector type

Series No.

: 38

S : Receptacle

Insulator typestyle

P : Plug

Receptacle A : Standard

Plug Blank : Standard

Connector style

Contact pitch : 0.3mm

Termination type

V : Straight SMT

Receptacle/Shell

SD : Fine coaxial cable plug

Packaging

J : Receptacle for conductivity tests

Blank : Standard

ꢀ51ꢁ : Embossed tape packaging

Installation item ꢀseparateꢁ

SHL : Metal cover

Number of positions : 30, 32, 40

■Combinations

●Standard use

DF38A-*S-0.3Vꢀ**ꢁ

+ DF38-*P-ASSY

DF38-*P-0.3SDꢀ**ꢁ

ꢀ _DF38-*P-SHL

ꢁ

Note: The product specification of the above combination is shown on page 2.

●Receptacle conductivity test

DF38A-*S-0.3Vꢀ**ꢁ

+ DF38J-*P-ASSY ··· ꢀNoteꢁ

DF38-*P-0.3SDꢀ**ꢁ

ꢀ _DF38J-*P-SHL

ꢁ

Note: This harness item is only usable for the receptacle test.

For the product specification of the above combination, please contact our sales department.

●Plug conductivity test

DF38AJ-*S-0.3Vꢀ**ꢁ ··· ꢀNoteꢁ

+ DF38-*P-ASSY

DF38-*P-0.3SDꢀ**ꢁ

ꢀ _DF38-*P-SHL

ꢁ

This harness item is only usable for the plug test.

Note:

For the product specification of the above combination, please contact our sales department.

* : ASSY means a harness item.

DF38 Series●0.3 mm Pitch, 1.5 mm Mated Height, Board- to-Fine Coaxial Cable Connectors

■Receptacles

0.2

0.15

P=0.3 0.1

0.1 0.05

Contact No.2

Contact No.1

■Recommended PCB mounting pattern

0.05

0.02

P=0.3 0.02

Contact No.2

0.05

Contact No.1

0.05

0.3 0.02

Ground areas

0.05

Refer to User Recommendation page

ꢀPara. 3ꢁ for the recommended metal

mask dimensions and open area ratios.

Note

Area indicated must be free of conductive

traces or the conductive traces must be covered by resist film.

[Specifications number] - * *, ꢀ* *ꢁ

ꢀ51ꢁ : Embossed tape packaging

ꢀ5,000 pieces per reelꢁ

All dimensions: mm

Part Number

CL No.

Number of Contacts

DF38A-30S-0.3Vꢀ**ꢁ

DF38A-32S-0.3Vꢀ**ꢁ

DF38A-40S-0.3Vꢀ**ꢁ

662-4505-4-**

662-4028-7-**

662-4501-3-**

8.7

9.3

11.7

13.1

13.7

16.1

9.6

12.8

13.4

15.8

13.7

14.3

16.7

0.95

1.25

0.95

2.95

3.25

3.85

3.25

2.95

3.55

10.2

12.6

Note 1: Tape and reel packaging ꢀ5,000 pieces/reelꢁ.

Order by number of reels.

DF38 Series●0.3 mm Pitch, 1.5 mm Mated Height, Board- to-Fine Coaxial Cable Connectors

■Plug - separate metal cover required

A± ±0.1

B± ±0.1

P=±03± ±0.

Contact No0.

[Specifications number] - * *, (* *)

(1.) : Embossed tape packaging

(1,±±± pieces per reel)

All dimensions: mm

Part Number

CL No0

Number of Contacts

DF38B-3±P-±03SD(**)

DF38-32P-±03SD(**)

DF38-4±P-±03SD(**)

662-41.1-8-**

662-4±27-4-**

662-41±2-6-**

3±

4±

.40±

.406

.70±

807

903

..07

9011

.±0.1

.2011

Note .: Tape and reel packaging (1,±±± pieces/reel)0

Order by number of reels0

Note 2: The metal cover is required for fine coaxial cable termination0

■Recommended Fine Coaxial Cable Preparation

C± ±.1

B± ±.10

Inner conductor

(Pre-soldering

required)

P=±.3± ±.±ꢀ

±.2 MAX (Insulator)

Outer shield

(NO protrusion)

Ø±.3 MAX (Jacket)

±.46 MAX

(Ground bar)

Laminated tape

Note .: Contact Hirose for Termination Procedures0

DF38 Series●0.3 mm Pitch, 1.5 mm Mated Height, Board- to-Fine Coaxial Cable Connectors

■Metal cover - Required for assembly of the Plug

.022± ±0.1

A± ±0.1

All dimensions: mm

Part Number

DF38-3±P-SHL

DF38-32P-SHL

DF38-4±P-SHL

CL No0

Number of Contacts

662-41±7-±

662-4±29-±

662-41±3-9

3±

4±

.20.1

.2071

.10.1

Note .: Reel packaging (.±,±±± pieces/reel)0

Order by number of reels0

DF38 Series●0.3 mm Pitch, 1.5 mm Mated Height, Board- to-Fine Coaxial Cable Connectors

■Embossed Carrier Tape Dimensions (JIS C 0806)

●Receptacle

8± ±0.

4± ±0.

(.07)

(Vacuum pick-up area center)

2± ±0.

F - F

(20.)

(.08)

(.)

Unreeling direction

G - G

(4)

●Reel Dimensions

Part Number Label

Unreeling direction

Ø2.± ±08

D⁺²

E MAX

All dimensions: mm

Part Number

CL No0

Number of Contacts

DF38A-3±S-±03V(1.)

DF38A-32S-±03V(1.)

DF38A-4±S-±03V(1.)

662-41±1-4-1.

662-4±28-7-1.

662-41±.-3-1.

3±

4±

2804

.402

3204

3804

DF38 Series●0.3 mm Pitch, 1.5 mm Mated Height, Board- to-Fine Coaxial Cable Connectors

■Embossed Carrier Tape Dimensions (JIS C 0806)

●Plug

(.07)

8± ±0.

4± ±0.

(Vacuum pick-up area center)

2± ±0.

F - F

(.01)

(.08)

Unreeling direction

G - G

(207)

●Reel Dimensions

Part Number Label

Ø2.± ±08

D⁺²

E MAX

All dimensions: mm

Part Number

CL No0

Number of Contacts

DF38-3±P-±03SD(1.)

DF38-32P-±03SD(1.)

DF38-4±P-±03SD(1.)

662-41±6-7-1.

662-4±27-4-1.

662-41±2-6-1.

3±

4±

2804

.402

3204

3804

DF38 Series●0.3 mm Pitch, 1.5 mm Mated Height, Board- to-Fine Coaxial Cable Connectors

■Extraction tool

For details about the extraction tool, please contact your Hirose sales representative.

■Usage Recommendations

.0 Recommended temperature

profile

Temperature (ç)

21±

2±±

.1±

.±±

1±

21±ç

22±ç

6±sec0

.8±ç

max0

.1±ç

9± to .2±sec0

Room

temperature

1±

.±±

.1±

2±±

21±

3±±

Time (sec0)

Solder composition: Paste, 9601%Sn/30±%Ag/±01%Cu

Note .: Up to 2 cycles of Reflow soldering are possible under the

same conditions, provided that there is a return

to normal temperature between the first and second cycle0

Note 2: The temperature profile indicates the board surface temperature

at the point of contacts with the connector terminals0

20Recommended manual soldering

Manual soldering: 31±ç for 3 seconds

Do NOT use flux compound when manual soldering0

30Recommended screen thickness

and open area ratio (Pattern area

ratio)

Thickness: ±0. mm

Open area ratio: Lead terminal: 8±%

Ground terminal: .±±%

40Board warpage

Maximum of ±0±2mm at the connector center, with both ends of the

connector as reference points0

Refer to “Nylon Connector Use Handbook”0

10Cleaning conditions

60Precautions

* Mating and un-mating of the connectors when not soldered on the

boards is not recommended as this may cause deformation of the

terminals, damage to the contacts or insulators0

* When mating/un-mating do not twist or lift by the corners0 Apply the

forces evenly across the entire length and width of the connectors

taking care NOT to damage or deform soldered terminations0

* Slight discoloration on the insulating materials will not affect form,

fit or function of the connectors0

DF38 Series●0.3 mm Pitch, 1.5 mm Mated Height, Board- to-Fine Coaxial Cable Connectors

■Precautions

Precautions

■Mating

Mate the plug with the receptacle by pressing straight against the entire plug surface0

Do NOT un-mate the plug while holding by the terminated cable0

Plug

Lock areas

Receptacle

■Un-mating

Use a dedicated extraction tool to un-mate the plug0 Insert the tool under either end of the plug (clearance) and pull straight up as

illustrated0

Do NOT un-mate the plug while holding by the terminated cable0

Extraction tool

End side (clearance)

■Routing of the fine coaxial cable after termination

Allow sufficient clearance between the plug and the fine coaxial cable to avoid sharp bend, excessive twist or pull forces applied to

the connector0

No pulling

■Other

· Do NOT mate / un-mate the connectors when receptacle is not mounted on the board0

· Different production lots may exhibit different shades of the insulator materials0 No affect on form, fit or function of the connectors0

· Rework of the soldered terminations on the board-mounted receptacles is not possible0

· Sides of the metal cover protrude over the termination areas0

· Do not mate / un-mate the connectors when receptacle is not mounted on the board0

DF38 Series●0.3 mm Pitch, 1.5 mm Mated Height, Board- to-Fine Coaxial Cable Connectors

MEMO :

DF38 Series●0.3 mm Pitch, 1.5 mm Mated Height, Board- to-Fine Coaxial Cable Connectors

USA:

HIROSE ELECTRIC (U.S.A.), INC. Headquarters

HIROSE ELECTRIC (U.S.A.), INC. San Jose Office

HIROSE ELECTRIC (U.S.A.), INC. Detroit Office (Automotive)

2688 Westhills Court, Simi Valley, CA 93065-6235 3255 Scott Boulevard, Building 7, Suite 101 37677 Professional Center Drive, Suite #100C

Phone : +1-805-522-7958

Fax : +1-805-522-3217

http://www.hiroseusa.com

Santa Clara, CA 95054

Phone : +1-408-253-9640

Fax : +1-408-253-9641

http://www.hiroseusa.com

Livonia, MI 48154

Phone : +1-734-542-9963

Fax : +1-734-542-9964

http://www.hiroseusa.com

THE NETHERLANDS:

GERMANY:

UNITED KINGDOM:

HIROSE ELECTRIC EUROPE B.V.

Hogehillweg #8 1101 CC Amsterdam Z-O

Phone : +31-20-6557460

Fax : +31-20-6557469

HIROSE ELECTRIC EUROPE B.V. German Branch

Herzog-Carl-Strasse 4 D-73760 Ostfildern

(Scharnhauser Park)

Phone : +49-711-4560-02-1

Fax : +49-711-4560-02-299

http://www.hirose.de

HIROSE ELECTRIC EUROPE B.V. UK Branch

22 Vincent Avenue, Crownhill Business

Centre, Crownhill, Milton Keynes, MK8 0AB

Phone : +44-1908-305750

Fax : +44-1908-305768

http://www.hirose.co.uk

http://www.hiroseeurope.com

CHINA:

HIROSE ELECTRIC TRADING (SHANGHAI) CO., LTD. HIROSE ELECTRIC TRADING (SHANGHAI) CO., LTD. Beijing Branch HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD.

1601,Henderson Metropolitan,NO.300 ,East Nanjing A1001, Ocean International Center, Building 56# East 4th Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre

Road,Huangpu District, Shanghai,China 200001

Phone : +86-21-6391-3355

Ring Middle Road, Chao Yang District, Beijing, 100025

Phone : +86-10-5165-9332

5002, ShenNanDong Road, ShenZhen City, Guangdong Province, 518008

Phone : +86-755-8207-0851

Fax : +86-21-6391-3335

Fax : +86-10-5908-1381

Fax : +86-755-8207-0873

http://www.hirose-china.com.cn

HONG KONG:

TAIWAN:

KOREA:

HIROSE ELECTRIC HONGKONG TRADING CO., LTD. HIROSE ELECTRIC TAIWAN CO., LTD.

Room 1001, West Wing, Tsim Sha Tsui Centre, 66 103 8F, No.87, Zhengzhou Rd., Taipei

Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong Phone : +886-2-2555-7377

HIROSE KOREA CO., LTD.

1261-10, Jeoungwhang-Dong, Shihung-City,

Kyunggi-Do 429-450

Phone : +852-2803-5338

Fax : +852-2591-6560

http://www.hirose-hongkong.com.hk

Fax : +886-2-2555-7350

http://www.hirose-taiwan.com.tw

Phone : +82-31-496-7000,7124

Fax : +82-31-496-7100

http://www.hirose.co.kr

SINGAPORE:

INDIA:

HIROSE ELECTRIC SINGAPORE PTE. LTD.

HIROSE ELECTRIC SINGAPORE PTE. LTD. Bangalore Liaison office HIROSE ELECTRIC SINGAPORE PTE. LTD Delhi Liaison Office

10 Anson Road #26-1 International Plaza Unit No.03, Ground Floor, Explorer Building International Tech Suite No. 606 5th Floor SB Tower 1A/1 Sector

079903

Phone : +65-6324-6113

Park Whitefield Road, Bangalore 560066 Karnataka, India

Phone : +65-6324-6113

16 A Filmcity Noida 201301 Uttar Pradesh-India

Phone : +91-120-4804917

65-6324-6123

Fax : +

Fax : +65-6324-6123

Fax : +91-120-4804949

http://www.hirose-singapore.com.sg

http://www.hirose.com/sg/

MALAYSIA:

HIROSE ELECTRIC SINGAPORE PTE. LTD (Representative office)

1-10-07, Suntech @ Penang Cybercity (1164),Lintang

Mayang Pasir 3,11950, Bayan Baru, Penang, Malaysia.

Phone : +604-619-2564

Fax : +604-619-2574

http://www.hirose.com/sg/

6-3,Nakagawa Chuoh-2-Chome,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN

TEL: 81-45-620-3526 Fax: 81-45-591-3726

http://www.hirose.com

http://www.hirose-connectors.com

The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.

The contents of this catalog are current as of date of 3/2014. Contents are subject to change without notice for the purpose of improvements.

DF38AJ-30S-0.3V(51) [HRS]

相关型号：

DF3A-10EP-2A

DF3A-10EP-2C

DF3A-10EP-2DS

DF3A-10EP-2DSA

DF3A-10EP-2H

DF3A-10EP-2R26

DF3A-10EP-2R28

DF3A-10EP-2V

DF3A-10P-2A

DF3A-10P-2C

DF3A-10P-2DS

DF3A-10P-2DSA