DF4-4PA-2R26 [HRS]
Board Connector, 4 Contact(s), 1 Row(s), Male, 0.079 inch Pitch, IDC Terminal, Black Insulator, Plug;
| 型号： | DF4-4PA-2R26 |
| 厂家： | 
HRS |
| 描述： | Board Connector, 4 Contact(s), 1 Row(s), Male, 0.079 inch Pitch, IDC Terminal, Black Insulator, Plug 连接器 |
| 文件： | 总5页 (文件大小：132K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
2mm Pitch Connector Directly Mounted on Board
DF4 Series
■Features
1. Cost Saving for Header
Thanks to the insertion/extraction socket and the harness product at
the both connector edges, one of two headers necessary at both edge
sockets can be saved without losing the function to separate
individual boards.
2. Miniature and Multiple Contacts
The miniature connector has broad variations in contact number.
Board mounting height : 4.3mm (Crimping Single row )
Maximum contact number
:
32 contacts (Crimping Double row )
3. Board Pre-fixed Mechanism
The insertion state to the board is a light crimping, which enables the
pre-fixed process to the board.
Height 4.3mm
■Applications
Note PC, Small business equipment
Board pre-fixed mechanism
B202
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
DF4 Series●2mm Pitch Connector Directly Mounted on Board
■Product Specifications
AWG 24
AWG 26
AWG 28
: 3A
: 2A
: 1A
Operating Temperature Range -30 to +85ç(Note 1)
Current rating Crimping
Operating Moisture Range
Storage Temperature Range
Storage Moisture Range
-40 to 80%
(Note 1)
Cable Size
Rating
-10 to +60ç(Note 2)
-40 to 70%
Voltage rating Crimping
250V AC
Item
Specification
Condition
1. Insulation Resistance 1000M ohms Min
500V DC
2. Withstanding voltage No flashover or insulation breakdown.
3. Crimping Area Resistance 30m ohms Max.
650V AC/1 minute
100mA
4. Vibration
No damage, cracks, or parts looseness.
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2
hours in each of the 3 directions.
5. Humidity (Steady state) Contact resistance: 30m ohms Max Insulation resistance:500M ohms Min
96 hours at temperature of 40ç and humidity of 90% to 95%
6. Temperature Cycle
Contact resistance: 30m ohms Max Insulation resistance: 1000M ohms Min Temperature -55 ➝ 5 to 35 ➝ +85 ➝ -5 to 35ç
time
-30 ➝ 5 to 15 ➝ 30 ➝ -5 to 15 min under
5 cycles.
7. Resistance to Soldering heat No deformation of components affecting performance. Manual soldering: 300ç for 3 seconds
Flow: 250ç for 10 seconds
Note 1: The rated current will be changed according to cable sizes for use.
Note 2: Includes temperature rise caused by current flow.
Note 3: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Note 4: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for
a specific part number shown.
■Material
Product
Part
Material
Polyamide
Brass
Finish
Black
Remarks
UL94V-0
–––––––
Crimping Plug
Insulator
Contact
Crimping Contact for Plug
Tin plating
■Ordering Information
●Connector
DF4 - * P - 2 C
q
w
e
r
t
q Series Name: DF4
r Contact Pitch: 2mm
t Connection Type
C: Crimping socket
w Number of Contact: 2 to 15, 4 to 32
e Connector Type
P: Single row plug
DP: Double row plug
●Contact
DF4 - 2428- PCF
q
w
q Applicable cable size
w Packaging Type
2428 : AWG24 to 28
PCF: Plug contact/Reel
PC: Plug contact/Bag
B203
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
DF4 Series●2mm Pitch Connector Directly Mounted on Board
■Single Row Crimping Plug
Photo: Contact insertion state.
+0.1
●Applicable Through-hole Diameter : Ø0.8
+0
Unit:mm
Part Number
DF4- 2P-2C
DF4- 3P-2C
DF4- 4P-2C
DF4- 5P-2C
DF4- 6P-2C
DF4- 7P-2C
DF4- 8P-2C
CL No.
Number of Contacts
A
B
RoHS
Part Number
DF4- 9P-2C
DF4-10P-2C
DF4-11P-2C
DF4-12P-2C
DF4-13P-2C
DF4-14P-2C
DF4-15P-2C
CL No.
Number of Contacts
A
B
RoHS
544-0003-4
544-0004-7
544-0005-0
544-0006-2
544-0007-5
544-0008-8
544-0009-0
04.5 02.0
06.5 04.0
08.5 06.0
544-0010-0
544-0011-2
544-0012-5
544-0013-8
544-0014-0
544-0015-3
544-0016-6
18.5
20.5
22.5
24.5
26.5
28.5
30.5
2
3
4
5
6
7
8
09
10
11
12
13
14
15
16.0
18.0
20.0
10.5 08.0 Yes
12.5 10.0
22.0 Yes
24.0
14.5 12.0
26.0
16.5 14.0
28.0
Note 1.The quantity at the specific No. "None" is delivered per bag (100pcs.). If needed, please order the products per bag.
■Crimping Contact
Part Number
DF4-2428PCF(05)
DF4-2428PC(05)
CL No.
Packaging Type
Reel
Quantity
10,000
100
Finish
RoHS
544-0020-3-05
544-0021-6-05
Tin plating
Tin plating
Yes
Bag
●Applicable Cable (Tin plating Annealed copper wire)
Conductor Size
Recommended Cable
Jacket Diameter
AWG24 (11 cores./0.16mm)
AWG 26 (7cores./0.16mm)
AWG 28 (7cores./0.127mm)
UL1061
Ø0.75 to Ø1.2mm
UL1061/1007
Note:If other cables are used instead of the applicable cable, contact Hirose sales
department.
● Strip Length: 1.3 to 1.9mm
BApplicable Crimping Tool
Type
Part Number
AP105-DF4-2428P
CM-105
CL No.
Applicable Contact
DF4-2428PCF(05)
–––––––
Applicator
901-4539-0
901-0005-4
550-0173-6
550-0179-2
Press Main Unit
Manual Crimping Tool DF4-TA2428HC
Extraction Tool DF-C-PO (B)
DF4-2428PC(05)
DF4-2428PCF(05)
Note: If any trouble has occurred due to other tools, which are not designated by Hirose,
Hirose won't guarantee any products.
B204
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
DF4 Series●2mm Pitch Connector Directly Mounted on Board
■Double Row Crimping Plug
Photo: Contact insertion state
● Applicable Through-hole Diameter Ø0.9 0.05
Note:The dip side may be deviated according to the cable thickness and the crimping contact bent up/down.
Unit:mm
Part Number
DF4-04DP-2C
DF4-06DP-2C
DF4-08DP-2C
DF4-10DP-2C
DF4-12DP-2C
DF4-14DP-2C
DF4-16DP-2C
DF4-18DP-2C
DF4-20DP-2C
DF4-22DP-2C
DF4-24DP-2C
DF4-26DP-2C
DF4-28DP-2C
DF4-30DP-2C
DF4-32DP-2C
CL No.
Number of Contacts
A
B
RoHS
04.8
06.8
08.8
10.8
12.8
14.8
16.8
18.8
20.8
22.8
24.8
26.8
28.8
30.8
32.8
544-0078-3
544-0079-6
544-0080-5
544-0081-8
544-0082-0
544-0083-3
544-0084-6
544-0085-9
544-0086-1
544-0087-4
544-0088-7
544-0089-0
544-0090-9
544-0091-1
544-0092-4
04
06
08
10
12
14
16
18
20
22
24
26
28
30
32
02.0
04.0
06.0
08.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
24.0
26.0
28.0
30.0
YES
Note 1.The quantity at the specific No. "None" is delivered per bag (100pcs.). If needed, please order the products per bag.
B205
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
DF4 Series●2mm Pitch Connector Directly Mounted on Board
BPrecautions
1. Recommended
Flow: 250ç for 3 seconds
1. Soldering Condition
Manual soldering: 290 10ç for 2 seconds
■
If the cable neighboring the connector is bent and unstraightened, secure a large bending radius because the
Jacket will be broken by the solder heat and the contact wire will be exposed.The Jacket in this part will be tore.
■ After the soldering process. If a stress is applied to the cable in the state where the connector and the
cable has heat inside, the Jacket hold area will be loosen. Therefore, carry out the post-soldering
operation after the connector has returned to the room temperature..
Refer to Nylon Connector Use Hand book.
2. Cleaning Condition
Don't use a solvent such ass trichloroethylene which invades the cable Jacket. In addition, avoid heat
cleaning by a solvent.
3. Connection Condition
Refer to the Nylon Connector Use Hand book.
B206
相关型号：
DF4-5P-2C(41)
Board Connector, 5 Contact(s), 1 Row(s), Male, 0.079 inch Pitch, Crimp Terminal, Black Insulator, Plug
HRS
DF4-5P-2R26
Board Connector, 5 Contact(s), 1 Row(s), Male, 0.079 inch Pitch, IDC Terminal, Black Insulator, Plug
HRS
DF4-5PA-2R26
Board Connector, 5 Contact(s), 1 Row(s), Male, 0.079 inch Pitch, IDC Terminal, Black Insulator, Plug
HRS
DF4-6DP-2C
Board Connector, 6 Contact(s), 2 Row(s), Male, 0.079 inch Pitch, Crimp Terminal, Black Insulator, Plug, ROHS COMPLIANT
HRS
DF4-6P-2C(40)
Board Connector, 6 Contact(s), 1 Row(s), Male, 0.079 inch Pitch, Crimp Terminal, Black Insulator, Plug
HRS
DF4-6P-2C(41)
Board Connector, 6 Contact(s), 1 Row(s), Male, 0.079 inch Pitch, Crimp Terminal, Black Insulator, Plug
HRS
DF4-6P-2R26
Board Connector, 6 Contact(s), 1 Row(s), Male, 0.079 inch Pitch, IDC Terminal, Black Insulator, Plug
HRS
©2020 ICPDF网 联系我们和版权申明