DF40C-20DS-0.4V(70) [HRS]
Board Stacking Connector,;型号: | DF40C-20DS-0.4V(70) |
厂家: | HRS |
描述: | Board Stacking Connector, 连接器 |
文件: | 总20页 (文件大小:887K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
0.4mm Pitch, 1.5 to 4.0mm Height, Board-to-Board and Board-to-FPC Connectors
DF40 Series
Space saving
Space saving
-%ꢀedh#!ꢀ%#)ꢀbbꢀe^iX]!ꢀ&#*ꢀbbꢀ]Z^\]i
:m^hi^c\
egdYjXih
9;)%
&-#+bb
Features
■
High contact reliability - effective mating length 0.45mm
1. High density mounting
H]dX`ꢀVWhdgei^dcꢀg^Wh
Space saving design that has a minimum connector
width, yet still retains a sufficient vacuum area for
easy pick-and-place mounting
Minimum width : 3.38mm
2. Multiple stack height options
In addition to its space saving design, several stack
heights are available and add versatility to any
application. Stack heights : 1.5mm, 2.0mm, 2.5mm,
3.0mm, 3.5mm, and 4.0mm.
3. High contact reliability
AdX`ꢀhnhiZb
ꢁ&%ꢀedh#ꢀidꢀ*%ꢀedh#ꢂ
Despite its small stature and low profile, the contacts
deliver strong contact forces and an effective mating
length of 0.45mm on the 1.5mm stacking height.
This connector utilizes a locking system that prevents
accidental unmating issues and emits a clear tactile
click to ensure that mating has been completed.
Stacking height variations
Standard type
4. Excellent self-aligning range
Stacking
height
1.5
2.0
mm
2.5
mm
3.0
3.5
mm
4.0
mm
The use of guide ribs allows 0.33mm of self-
alignment on this connector.
mm
mm
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
10
12
20
24
30
34
40
44
50
60
70
80
90
100
○
○
○
○
○
○
○
−
○
−
○
○
○
○
−
5. Reinforced structure with shock absorbing ribs
○
−
○
−
Both sides of the connector have been reinforced
with the addition of shock absorbing ribs.
○
−
○
−
○
−
6. Solder wicking prevention
○
○
○
○
○
○
−
○
○
○
○
○
○
○
○
○
○
−
Nickel-plated barriers were added to protect the
contact areas from potential solder wicking.
−
○
○
○
○
○
○
○
○
−
−
−
○
○
−
○
○
−
7. Contamination resistant design
When mated, the connector’s design covers the
contacts which help to keep dust and other debris away
from the contacts. The SMT leads are kept very close
to the connector housing which also helps to prevent
shorts caused by debris on the exposed contacts.
○
−
−
○
○
−
−
−
8. RoHS compliant
Shielded type
Stacking
height
1.5
3.0
Environment friendly and does not use RoHS
specified prohibited materials.
mm
○
○
−
mm
30
48
70
−
○
○
All materials and substances used to produce these
parts comply with the RoHS standards.
9. High speed signal with noise prevention
The shielded type can support high speed signal
transmissions with noise prevention.
In cases where the application will demand a high level of reliability, such as automotive,
please contact a company representative for further information.
2016.4
⑤
1
DF40 Series●0.4mm Pitch, 1.5 to 4.0mm Height, Board-to-Board and Board-to-FPC Connectors
Product Specifications
■
Operating Temperature Range
-35 85 (Note 1)
Storage Temperature Range
-10 60 (Note 2)
Rated Current 0.3A
Ratings
to +
℃
to +
Storage Humidity Range
40 70% (Note 2)
℃
Rated Voltage AC, DC 30V Operating Humidity Range
20
80%
to
to
Conditions
Items
1. Insulation Resistance 50Mø min
2. Withstanding Voltage No flashover or breakdown
3. Contact Resistance 90mø max
Specifications
Measured with DC 100V
Apply AC 100V for 1 minute
Measured with AC 20mV, 1 kHz and 1mA
Frequency 10-55 Hz, half amplitude 0.75mm,
3 directions for 2 hours
4. Vibration Resistance No electrical discontinuity of 1µs or greater
Contact resistance : 90mø max
5. Humidity Resistance
Left at temperature 40 2ꢀ, humidity 90 to 95%,
96 hours
Insulation resistance : 25mø min
Contact resistance : 90mø max
6. Temperature Cycles
( 55ꢀ : 30 minutes
5~35ꢀ : 10 minutes
85ꢀ : 30
→
-
→
Insulation resistance : 50mø min
minutes
5~35ꢀ : 10 minutes) 5 cycles
→
7. Durability
Contact resistance : 90mø max
30 mating cycles
Reflow : according to the Recommended
Temperature Profile
Hand solder : Soldering iron temperature 350ꢀ,
no more than 3 seconds.
8. Soldering Heat
Resistance
Should be no melting of resin parts that affects
its performance
Note 1 : Includes temperature rise caused by current flow.
Note 2 : The term "storage" here refers to products stored for a long period prior to board mounting and use. The operating
temperature and humidity range covers the non-energized condition of connectors after board mounting and the
temporary storage conditions during transportation, etc.
Materials (Standard, non shielded type) / Finish
■
Product
Component
Materials
Finish
UL Regulation
Insulator
Contact
Insulator
Contact
LCP
Phosphor bronze
LCP
Black
Gold plating
Black
UL94V-0
---------------
UL94V-0
---------------
Receptacle
Header
Phosphor bronze
Gold plating
Materials (Shielded type) / Finish
■
Product
Component
Materials
LCP
Finish
Black
UL Regulation
Insulator
Contact
UL94V-0
---------------
---------------
UL94V-0
Receptacle
Phosphor bronze
LCP
Gold plating
Black
Shield plate
Insulator
Header
Contact
Reinforcing metal fitting
---------------
---------------
Phosphor bronze
Gold plating
2
DF40 Series●0.4mm Pitch, 1.5 to 4.0mm Height, Board-to-Board and Board-to-FPC Connectors
Product Number Structure (Standard, non-shielded type)
■
Refer to the chart below when determining the product specifications from the product number.
Please select from the product numbers listed in this catalog when placing orders.
●Receptacle
(
)
(
)
DF40 # − ** − * DS − 0.4 V **
❶
❷
❸
❹
❺
❻
❼
❽
Series Name: DF40
Style
No. of Contacts
❹
❶
❷
Stacking height
❸
Display
None
2.0
Stacking height
Connector Type
DS : Double row receptacle
❺
1.5mm
2.0mm
2.5mm
3.0mm
3.5mm
4.0mm
B : With reinforcing metal fitting
HB : With reinforcing metal fitting
(The H denotes a stacking height 2.5mm or above)
C : Without reinforcing metal fitting
HC : Without reinforcing metal fitting
(The H denotes a stacking height 2.5mm or above)
Contact Pitch : 0.4mm
❻
❼
2.5
3.0
3.5
4.0
Mating direction Shape V : Vertical SMT
Packaging Type
(51) Embossed tape packaging
❽
●Header
(
)
DF40 # − * DP − 0.4 V **
❶
❷
❸
❹
❺
❻
❼
Series Name : DF40
Style
No. of Contacts
Connector Type
Contact Pitch : 0.4mm
❶
❷
❸
❹
❺
❻
Mating direction V : Vertical SMT
C : Without reinforcing metal fitting
DP : Double row pin header
Packaging Type
(51) Embossed tape packaging
❼
Shielded type
■
●Receptacle
(
)
(
)
DF40 GB − ** − * DS − 0.4 V **
❶
❷
❸
❹
❺
❻
❼
❽
Stacking height
❸
Series Name : DF40
❶
❷
Connector Type
DS : Double row receptacle
❺
Style
GB : With shield
Display
1.5
Stacking height
1.5mm
Contact Pitch : 0.4mm
❻
❼
3.0
3.0mm
Mating direction V : Vertical SMT
No. of Contacts
Packaging Type
(51) Embossed tape packaging
❹
❽
●Header
(
)
DF40 GB − * DP − 0.4 V **
❶
❷
❸
❹
❺
❻
❼
Series Name : DF40
Style
GB : With reinforcing metal fitting
(For use with shielded product )
No. of Contacts
Connector Type
Contact Pitch : 0.4mm
❶
❷
❸
❹
❺
❻
Mating direction V : Vertical SMT
DP : Double row pin header
Packaging Type
(51) Embossed tape packaging
❼
3
DF40 Series●0.4mm Pitch, 1.5 to 4.0mm Height, Board-to-Board and Board-to-FPC Connectors
Receptacle (Stacking height 1.5mm)
■
A± ±.2
B± ±.±8
P=±.4± ±.±0
±.12± ±.±2
Vacuum pick up area : C± ±.2
Recommended PCB layout
B
B± ±.±2
1.2± ±.±2
B± ±.±2
P=±.4± ±.±2
P=±.4± ±.±2
±.2± ±.±2
±.2± ±.±2
DF40C(Without reinforcing metal fitting)
DF40B(With reinforcing metal fitting)
【Specification No.】
(51) : Embossed package 5,000 pcs/reel
Stacking height 1.5mm
■
Unit : mm
Part No.
HRS No.
No. of Contacts
A
B
C
D
DF40B-10DS-0.4V(51)
DF40B-12DS-0.4V(51)
DF40B-30DS-0.4V(51)
DF40B-50DS-0.4V(51)
DF40B-60DS-0.4V(51)
DF40B-80DS-0.4V(51)
DF40C-20DS-0.4V(51)
DF40C-24DS-0.4V(51)
DF40C-30DS-0.4V(51)
DF40C-34DS-0.4V(51)
DF40C-40DS-0.4V(51)
DF40C-50DS-0.4V(51)
DF40C-60DS-0.4V(51)
DF40C-70DS-0.4V(51)
DF40C-80DS-0.4V(51)
DF40C-90DS-0.4V(51)
DF40C-100DS-0.4V(51)
684-4038-8 51
684-4152-3 51
684-4090-8 51
684-4018-0 51
684-4049-4 51
684-4052-9 51
684-4005-9 51
684-4006-1 51
684-4007-4 51
684-4023-0 51
684-4008-7 51
684-4009-0 51
684-4004-6 51
684-4016-5 51
684-4002-0 51
684-4124-8 51
684-4033-4 51
10
12
30
50
60
80
20
24
30
34
40
50
60
70
80
90
100
4.6
1.6
1.0
1.5
5.0
2.0
8.6
5.6
12.6
14.6
18.6
6.6
9.6
11.6
15.6
3.6
3.2
1.0
1.2
1.5
2.3
7.4
4.4
8.6
5.6
1.45
9.4
6.4
10.6
12.6
14.6
16.6
18.6
20.6
22.6
7.6
9.6
11.6
13.6
15.6
17.6
19.6
3.2
Note 1 : Please place orders by full reel.
Note 2 : The surface of the 60 to 100 pos. parts have a small, concave section that will not affect the vacuum pick up operation.
Note 3 : Resist coating area.
Note 4 : This connector is NOT polarized.
4
DF40 Series●0.4mm Pitch, 1.5 to 4.0mm Height, Board-to-Board and Board-to-FPC Connectors
Receptacle (Stacking height 2.0mm)
■
A± ±.2
B± ±.±8
P=±.4± ±.±0
±.12± ±.±2
Vacuum pick up area : C± ±.2
Recommended PCB layout
B
B± ±.±2
1.2± ±.±2
B± ±.±2
P=±.4± ±.±2
P=±.4± ±.±2
±.2± ±.±2
±.2± ±.±2
DF40C(Without reinforcing metal fitting)
DF40B(With reinforcing metal fitting)
【Specification No.】
(51) : Embossed package 4,000 pcs/reel
Stacking height 2.0mm
■
Unit : mm
Part No.
HRS No.
No. of Contacts
A
B
C
D
DF40B(2.0)-12DS-0.4V(51)
DF40B(2.0)-80DS-0.4V(51)
DF40C(2.0)-20DS-0.4V(51)
DF40C(2.0)-24DS-0.4V(51)
DF40C(2.0)-30DS-0.4V(51)
DF40C(2.0)-40DS-0.4V(51)
DF40C(2.0)-50DS-0.4V(51)
DF40C(2.0)-60DS-0.4V(51)
DF40C(2.0)-70DS-0.4V(51)
DF40C(2.0)-80DS-0.4V(51)
684-4150-8 51
684-4128-9 51
684-4040-0 51
684-4021-2 51
684-4058-5 51
684-4042-5 51
684-4091-0 51
684-4034-7 51
684-4147-3 51
684-4132-6 51
12
80
20
24
30
40
50
60
70
80
5.0
2.0
1.0
3.2
1.0
1.2
1.5
18.6
6.6
15.6
3.6
7.4
4.4
8.6
5.6
1.95
10.6
12.6
14.6
16.6
18.6
7.6
9.6
11.6
13.6
15.6
3.2
Note 1 : Please place orders by full reel.
Note 2 : The surface of the 60 to 100 pos. parts have a small, concave section that will not affect the vacuum pick up operation.
Note 3 : Resist coating area.
Note 4 : This connector is NOT polarized.
5
DF40 Series●0.4mm Pitch, 1.5 to 4.0mm Height, Board-to-Board and Board-to-FPC Connectors
Receptacle (Stacking height 2.5mm to 4.0mm)
■
A± ±.2
B± ±.±8
P=±.4± ±.±0
±.12± ±.±2
Vacuum pick up area : C± ±.2
Recommended PCB layout
B
B± ±.±2
1.2± ±.±2
B± ±.±2
P=±.4± ±.±2
P=±.4± ±.±2
±.2± ±.±2
±.2± ±.±2
DF40HC(Without reinforcing metal fitting)
DF40HB(With reinforcing metal fitting)
【Specification No.】
(51) : Embossed package 3,000 pcs/reel
Stacking height 2.5mm
■
Unit : mm
Part No.
HRS No.
No. of Contacts
A
B
C
D
DF40HB(2.5)-10DS-0.4V(51)
DF40HC(2.5)-20DS-0.4V(51)
DF40HC(2.5)-40DS-0.4V(51)
DF40HC(2.5)-50DS-0.4V(51)
DF40HC(2.5)-60DS-0.4V(51)
684-4189-3 51
684-4126-3 51
684-4112-9 51
684-4101-2 51
684-4085-8 51
10
20
40
50
60
4.6
1.6
3.6
7.6
9.6
11.6
1.0
6.6
10.6
12.6
14.6
2.4
3.2
【Specification No.】
(51) : Embossed package 3,000 pcs/reel
■Stacking height 3.0mm
Unit : mm
Part No.
HRS No.
No. of Contacts
A
B
C
D
DF40HC(3.0)-30DS-0.4V(51)
DF40HC(3.0)-40DS-0.4V(51)
DF40HC(3.0)-44DS-0.4V(51)
DF40HC(3.0)-50DS-0.4V(51)
DF40HC(3.0)-60DS-0.4V(51)
DF40HC(3.0)-70DS-0.4V(51)
DF40HC(3.0)-80DS-0.4V(51)
DF40HC(3.0)-90DS-0.4V(51)
DF40HC(3.0)-100DS-0.4V(51)
684-4098-0 51
684-4169-6 51
684-4076-7 51
684-4099-2 51
684-4100-0 51
684-4138-2 51
684-4180-9 51
684-4161-4 51
684-4151-0 51
30
40
44
50
60
70
80
90
100
8.6
5.6
1.5
10.6
11.4
12.6
14.6
16.6
18.6
20.6
22.6
7.6
8.4
9.6
11.6
13.6
15.6
17.6
19.6
2.9
3.2
Note 1 : Please place orders by full reel.
Note 2 : The surface of the 60 to 100 pos. parts have a small, concave section that will not affect the vacuum pick up operation.
Note 3 : Resist coating area.
Note 4 : This connector is NOT polarized.
6
DF40 Series●0.4mm Pitch, 1.5 to 4.0mm Height, Board-to-Board and Board-to-FPC Connectors
Stacking height 3.5mm
■
【Specification No.】
(51) : Embossed package 2,000 pcs/reel
Unit : mm
Part No.
HRS No.
No. of Contacts
A
B
C
D
DF40HC(3.5)-20DS-0.4V(51)
DF40HC(3.5)-30DS-0.4V(51)
DF40HC(3.5)-40DS-0.4V(51)
DF40HC(3.5)-50DS-0.4V(51)
DF40HC(3.5)-60DS-0.4V(51)
DF40HC(3.5)-80DS-0.4V(51)
684-4188-0 51
684-4136-7 51
684-4209-9 51
684-4109-4 51
684-4102-5 51
684-4162-7 51
20
30
40
50
60
80
6.6
3.6
1.0
1.5
8.6
5.6
10.6
12.6
14.6
18.6
7.6
3.4
9.6
3.2
11.6
15.6
Stacking height 4.0mm
■
【Specification No.】
(51) : Embossed package 2,000 pcs/reel
Unit : mm
Part No.
HRS No.
No. of Contacts
A
B
C
D
DF40HB(4.0)-50DS-0.4V(51)
DF40HC(4.0)-50DS-0.4V(51)
DF40HC(4.0)-60DS-0.4V(51)
DF40HC(4.0)-80DS-0.4V(51)
DF40HC(4.0)-90DS-0.4V(51)
684-4104-0 51
684-4215-1 51
684-4133-9 51
684-4140-4 51
684-4165-5 51
50
50
60
80
90
12.6
12.6
14.6
18.6
20.6
9.6
11.6
15.6
17.6
3.2
3.9
Note 1 : Please place orders by full reel.
Note 2 : The surface of the 60 to 100 pos. parts have a small, concave section that will not affect the vacuum pick up operation.
Note 3 : Resist coating area.
Note 4 : This connector is NOT polarized.
7
DF40 Series●0.4mm Pitch, 1.5 to 4.0mm Height, Board-to-Board and Board-to-FPC Connectors
Receptacle (Stacking height 1.5mm, with shield)
■
< 30 contact >
8.64
6.48
5.6
±0.3
±
0.1
±0.08
P=0.4±0.05
0.2
±
0.02
Vacuum pick up area: 1.5 0.2
0.12
±
0.02
3.12±0.2
< 48 contact >
12.24
±
0.3
0.1
0.08
0.08
10.08
±
9.2
±
P=0.4±0.05
3.2
±
0.2
±
0.02
0.12±0.02
Vacuum pick up area: 3.2 0.2
0.12
±
0.02
3.12±0.2
Recommended PCB layout
B
10.08
9.2
3.2
±
0.02
< 30 contact >
< 48 contact >
6.48
±
0.02
±
0.02
5.6
±
0.02
±
0.02
P=0.4
±0.02
P=0.4±0.02
0.6
±
0.02
0.6±0.02
0.28±0.02
0.6±0.02
0.28±0.02
0.2±0.02
0.2±0.02
Stacking height 1.5mm
■
【Specification No.】
(51) : Embossed package 5,000 pcs/reel
Unit : mm
Part No.
HRS No.
No. of Contacts
Signal contact
Ground contact
DF40GB(1.5)-30DS-0.4V(51)
DF40GB(1.5)-48DS-0.4V(51)
684-4198-4 51
684-4194-3 51
30
48
30
40
4
12
Note 1 : Please place orders by full reel.
Note 2 : Resist coating area.
Note 3 : This connector is NOT polarized.
8
DF40 Series●0.4mm Pitch, 1.5 to 4.0mm Height, Board-to-Board and Board-to-FPC Connectors
Receptacle (Stacking height 3.0mm, with shield)
■
< 48 contact >
12.24
10.08
9.2
3.2
±0.3
±
0.1
±
0.08
P=0.4±0.05
±
0.08
0.2
±
0.02
0.12±0.02
0.12
±
0.02
Vacuum pick up area: 3.2 0.2
3.12±0.2
< 70 contact >
16.64
±
0.3
13.6
±
0.08
9.2
±
0.08
0.08
3.6
±
P=0.4
±
0.05
0.2
±
0.02
0.12±0.05
Vacuum pick up area: 3.2 0.2
0.12
±0.02
3.12±0.2
Recommended PCB layout
B
< 48 contact >
< 70 contact >
14.48±0.02
10.08
±
0.02
0.02
0.02
13.6
±
0.02
9.2
±
9.2
3.6
±0.02
30.2.6±±
P=0.4
±
0.02
±0.02
P=0.4
±0.02
0.02
0.6±0.02
0.6±0.02
0.28±0.02
0.2±0.02
0.2±0.02
0.6±0.02
0.6±0.02
0.6±0.02
0.28±0.02
Stacking height 3.0mm
■
【Specification No.】
(51) : Embossed package 3,000 pcs/reel
Unit : mm
Part No.
HRS No.
No. of Contacts
Signal contact
Ground contact
DF40GB(3.0)-48DS-0.4V(51)
DF40GB(3.0)-70DS-0.4V(51)
684-4197-1 51
684-4196-9 51
48
70
40
54
12
20
Note 1 : Please place orders by full reel.
Note 2 : The surface of the 70 pos. part have a small, concave section that will not affect the vacuum pick up operation.
Note 3 : Resist coating area.
Note 4 : This connector is NOT polarized.
9
DF40 Series●0.4mm Pitch, 1.5 to 4.0mm Height, Board-to-Board and Board-to-FPC Connectors
Header
■
A± ±0.
B± ±0±ꢀ
P=±04± ±0±5
±015± ±0±.
Vacuum pick up area : C± ±0.
Recommended PCB layout
B
7¤%#%'
%#+*¤%#%'
E2%#)¤%#%'
%#(¤%#%'
%#'(¤%#%'
%#(*¤%#%'
Unit : mm
C
Part No.
HRS No.
No. of Contacts
A
B
DF40C-10DP-0.4V(51)
DF40C-12DP-0.4V(51)
DF40C-20DP-0.4V(51)
DF40C-24DP-0.4V(51)
DF40C-30DP-0.4V(51)
DF40C-34DP-0.4V(51)
DF40C-40DP-0.4V(51)
DF40C-44DP-0.4V(51)
DF40C-50DP-0.4V(51)
DF40C-60DP-0.4V(51)
DF40C-70DP-0.4V(51)
DF40C-80DP-0.4V(51)
DF40C-90DP-0.4V(51)
DF40C-100DP-0.4V(51)
684-4035-0 51
684-4149-9 51
684-4010-9 51
684-4011-1 51
684-4012-4 51
684-4024-3 51
684-4013-7 51
684-4077-0 51
684-4014-0 51
684-4003-3 51
684-4015-2 51
684-4001-8 51
684-4125-0 51
684-4032-1 51
10
12
20
24
30
34
40
44
50
60
70
80
90
100
3.52
1.6
3.92
2.0
1.0
5.52
3.6
6.32
4.4
1.2
1.5
2.3
7.52
5.6
8.32
6.4
9.52
7.6
10.32
11.52
13.52
15.52
17.52
19.52
21.52
8.4
9.6
11.6
13.6
15.6
17.6
19.6
3.2
Note 1 : Please place orders by full reel.
Note 2 : There are no concave parts on the header side contact part to increase the mating strength for 60 pos. or above.
Note 3 : Use the contacts at the four corners as metal fittings. Do not use them as signal or power contacts.
Note 4 : The surface of the 90 pos and higher parts have a small, concave section that will not affect the vacuum pick up operation.
Note 5 : This connector is NOT polarized.
10
DF40 Series●0.4mm Pitch, 1.5 to 4.0mm Height, Board-to-Board and Board-to-FPC Connectors
Header (For use with shielded product)
■
A
±
0.3
0.1
0.08
B
±
C±
P=0.4±0.05
Vacuum pick up area:
0.2
0.15±0.02
G
1.52±0.2
0.08±0.02
Recommended PCB layout
B
0.05
D+
0
0
E-
0.05
B±0.02
0
F-
0.05
C±0.02
P=0.4±0.02
0.35±0.02
0.23±0.02
Unit : mm
Part No.
HRS No.
No. of Contacts
A
B
C
D
E
F
G
DF40GB-30DP-0.4V(51)
DF40GB-48DP-0.4V(51)
DF40GB-70DP-0.4V(51)
684-4200-4 51
684-4195-6 51
684-4199-7 51
30
48
70
7.16
6.67
5.6
9.2
13.6
8.74
7.32
6.12
9.72
1.5
3.2
3.2
10.76 10.27
15.16 14.67
12.34 10.92
16.74 15.32 14.12
Note 1 : Please place orders by full reel.
Note 2 : There are no concave parts of header side contact part to increase the mating strength for 60 pos. or above.
Note 3 : Resist coating area.
Note 4 : This connector is NOT polarized.
11
DF40 Series●0.4mm Pitch, 1.5 to 4.0mm Height, Board-to-Board and Board-to-FPC Connectors
Embossed Carrier Tape Dimensions (JIS C 0806 compliant)
B
●Receptacle (Stacking height 1.5mm)
●Reel Condition Dimensions
Product label
2± ±05
4± ±0.
F
2± ±0.
F-F
Ø.05 holes for
feed mechanism
A
A
G
G
H
E± ±05
D± .
±0ꢀ± ±0.
F
8± ±0.
H
Unreeling Direction
G-G
Stacking height 1.5mm
■
Unit : mm
Part No.
A
B
C
D
E
DF40#-10DS-0.4V(51)
DF40#-12DS-0.4V(51)
DF40#-20DS-0.4V(51)
DF40#-24DS-0.4V(51)
DF40#-30DS-0.4V(51)
DF40#-34DS-0.4V(51)
DF40#-40DS-0.4V(51)
DF40#-50DS-0.4V(51)
DF40#-60DS-0.4V(51)
DF40#-70DS-0.4V(51)
DF40#-80DS-0.4V(51)
DF40#-90DS-0.4V(51)
DF40#-100DS-0.4V(51)
DF40GB(1.5)-30DS-0.4V(51)
DF40GB(1.5)-48DS-0.4V(51)
-
-
-
-
-
-
-
-
-
16
7.5
21.5
17.5
24
11.5
29.5
25.5
32
44
24
28.4
14.2
20.2
11.5
37.5
49.5
29.5
33.5
45.5
25.5
40.4
-
-
Note 1 : For 10 to 60 contact position parts, the carrier tape only has one row of holes. The carrier for parts with 70 contacts and
above has two rows of holes.
12
DF40 Series●0.4mm Pitch, 1.5 to 4.0mm Height, Board-to-Board and Board-to-FPC Connectors
Embossed Carrier Tape Dimensions (JIS C 0806 compliant)
B
●
Receptacle (Stacking height 2.0mm to 2.5mm)
●Reel Dimensions
Product label
2
4
0.ꢁ
2
0.ꢁ
0.ꢀ
H-H
H
Øꢁ.ꢀ holes for
feed mechanism
G
G
E
0.ꢀ
D
ꢁ
0.3 0.ꢁ
H
8
0.ꢁ
J
Unreeling Direction
J
G-G
Stacking height 2.0mm
■
Unit : mm
F
Part No.
A
B
C
D
E
DF40#(2.0)-12DS-0.4V(51)
DF40#(2.0)-20DS-0.4V(51)
DF40#(2.0)-24DS-0.4V(51)
DF40#(2.0)-30DS-0.4V(51)
DF40#(2.0)-40DS-0.4V(51)
DF40#(2.0)-50DS-0.4V(51)
DF40#(2.0)-60DS-0.4V(51)
DF40#(2.0)-70DS-0.4V(51)
DF40#(2.0)-80DS-0.4V(51)
-
-
-
-
-
-
-
16
7.5
21.5
17.5
2.2
24
32
11.5
14.2
29.5
37.5
25.5
33.5
28.4
Stacking height 2.5mm
■
Unit : mm
F
Part No.
A
B
C
D
E
DF40H#(2.5)-10DS-0.4V(51)
DF40H#(2.5)-20DS-0.4V(51)
DF40H#(2.5)-40DS-0.4V(51)
DF40H#(2.5)-50DS-0.4V(51)
DF40H#(2.5)-60DS-0.4V(51)
-
-
-
-
-
16
7.5
21.5
17.5
2.72
24
11.5
29.5
25.5
Note 1 : For 10 to 60 contact position parts, the carrier tape only has one row of holes. The carrier for parts with 70 contacts and
above has two rows of holes.
13
DF40 Series●0.4mm Pitch, 1.5 to 4.0mm Height, Board-to-Board and Board-to-FPC Connectors
Embossed Carrier Tape Dimensions (JIS C 0806 compliant)
B
●Receptacle (Stacking height 3.0mm to 4.0mm)
●Reel Condition Dimensions
4
0.ꢁ
Product label
2
0.ꢁ
H-H
2
0.ꢀ
H
Øꢁ.ꢀ holes for
feed mechanism
G
G
E
0.ꢀ
D
ꢁ
0.4 0.ꢁ
H
8
0.ꢁ
J
Unreeling Direction
J
G-G
Stacking height 3.0mm
■
Unit : mm
Part No.
A
B
C
D
E
F
DF40H#(3.0)-30DS-0.4V(51)
DF40H#(3.0)-40DS-0.4V(51)
DF40H#(3.0)-44DS-0.4V(51)
DF40H#(3.0)-50DS-0.4V(51)
DF40H#(3.0)-60DS-0.4V(51)
DF40H#(3.0)-70DS-0.4V(51)
DF40H#(3.0)-80DS-0.4V(51)
DF40H#(3.0)-90DS-0.4V(51)
DF40H#(3.0)-100DS-0.4V(51)
DF40GB(3.0)-48DS-0.4V(51)
DF40GB(3.0)-70DS-0.4V(51)
-
-
-
-
-
24
11.5
29.5
25.5
3.15
32
44
28.4
14.2
20.2
37.5
49.5
33.5
45.5
40.4
24
32
11.5
14.2
29.5
37.5
25.5
33.5
-
28.4
Stacking height 3.5mm
■
Unit : mm
Part No.
A
16
B
C
D
E
F
DF40H#(3.5)-20DS-0.4V(51)
DF40H#(3.5)-30DS-0.4V(51)
DF40H#(3.0)-40DS-0.4V(51)
DF40H#(3.5)-50DS-0.4V(51)
DF40H#(3.5)-60DS-0.4V(51)
7.5
21.5
17.5
-
-
-
-
-
3.72
24
11.5
29.5
25.5
Stacking height 4.0mm
■
Unit : mm
Part No.
A
B
-
C
D
E
F
DF40H#(4.0)-50DS-0.4V(51)
DF40H#(4.0)-60DS-0.4V(51)
DF40H#(4.0)-80DS-0.4V(51)
DF40H#(4.0)-90DS-0.4V(51)
24
11.5
29.5
25.5
-
4.15
32
44
28.4
40.4
14.2
20.2
37.5
49.5
33.5
45.5
Note 1 : For 10 to 60 contact position parts, the carrier tape only has one row of holes. The carrier for parts with 70 contacts and
above has two rows of holes.
14
DF40 Series●0.4mm Pitch, 1.5 to 4.0mm Height, Board-to-Board and Board-to-FPC Connectors
●Header
●Reel Dimensions
4± ±.1
Product label
F-F
2± ±.1
F
2± ±.5
Ø1.5 holes for
feed mechanism
A
A
E± ±.5
D± 1
G
G
±.3± ±.1
H
F
Unreeling Direction
H
G-G
Unit : mm
Part No.
A
B
C
D
E
DF40C-10DP-0.4V(51)
DF40C-12DP-0.4V(51)
DF40C-20DP-0.4V(51)
DF40C-24DP-0.4V(51)
DF40C-30DP-0.4V(51)
DF40C-34DP-0.4V(51)
DF40C-40DP-0.4V(51)
DF40C-44DP-0.4V(51)
DF40C-50DP-0.4V(51)
DF40C-60DP-0.4V(51)
DF40C-70DP-0.4V(51)
DF40C-80DP-0.4V(51)
DF40C-90DP-0.4V(51)
-
-
-
-
-
-
-
-
-
-
12
5.5
17.5
13.5
17.5
16
7.5
21.5
24
32
11.5
14.2
29.5
37.5
25.5
33.5
28.4
44
16
24
40.4
20.2
7.5
49.5
21.5
29.5
45.5
17.5
25.5
DF40C-100DP-0.4V(51)
DF40GB-30DP-0.4V(51)
DF40GB-48DP-0.4V(51)
DF40GB-70DP-0.4V(51)
-
-
-
11.5
Note 1 : For 10 to 60 contact position parts, the carrier tape only has one row of holes. The carrier for parts with 70 contacts
and above has two rows of holes.
15
DF40 Series●0.4mm Pitch, 1.5 to 4.0mm Height, Board-to-Board and Board-to-FPC Connectors
Operating Precautions
B
1. Recommended Solder Profile
Temperature (ç)
250
250ç
220ç
60 seconds
or below
200
180ç
150ç
150
100
50
90 to 120 seconds
Normal
temperature
0
50
100
150
200
250
300
Heating time (sec.)
【Conditions】
1. Peak temperature
2. Heating part
Maximum of 250ç
Minimum of 220ç within 60 seconds
150 to 180ç 90 to 120 seconds
Maximum of 2 cycles
3. Preheating part
4. Number of times
Note 1 : The temperature shows PCB surface temperature near the connector lead part.
Soldering iron temperature 340 10ꢀ, solder time no more than 3 seconds
2. Recommended hand solder
conditions
3. Recommended screen thickness:
Opening ratio (pattern area ratio)
Thickness : 0.12mm
Opening ratio : DS side 80% DP side 80%
4. Leaning of PCB
Max 0.02mm at the center of connector (using both edges of connector as criteria)
5. Washing
Cleaning/washing is not recommended for this connector. Cleaning agents can
deteriorate the mechanical operation and the environmental resistance of this
connector.
6. Precautions
Do not mate or unmate these connectors until they are mounted, failure to follow
this precaution can lead to deformation or damage to these connectors.
Provide another form of support to the PCB, this connector was not designed to
be the main form of support.
■
■
Mating and unmating with excessive force can cause damage.
Do not apply excessive amounts of flux as it may cause excess solder and flux
wicking.
■
■
There may be a slight variance in the color of the molding between production
lots, this variance will not affect the performance of the connector.
Refer to the next page for the handling precautions when mating and unmating
the connectors.
If the connector becomes disconnected due to impact, a fall or a counterforce to
the FPC, it may be necessary to hold the connector in place with an addition to
the device’s case or other cushioning material to hold the connector in place.
■
■
■
16
DF40 Series●0.4mm Pitch, 1.5 to 4.0mm Height, Board-to-Board and Board-to-FPC Connectors
Precautions when connector mating
B
DF40*-*DS-0.4V
DF40*-*DS-0.4V
Prior to mating, locate the guidance ribs and
align the header.
Do not apply excess force to the connector
during mating. Doing so can lead to contact
damage.
Make sure that the connector is parallel to
the other side, it then will drop down slightly.
Continue to press it down until it is fully mated
while maintaining the angle. Do not apply
excessive force as it may damage the contacts.
17
DF40 Series●0.4mm Pitch, 1.5 to 4.0mm Height, Board-to-Board and Board-to-FPC Connectors
Precautions when unmating a connector
B
9;)%ꢃ"ꢃ9H"%#)K
9;)%ꢃ"ꢃ9E"%#)K
To unmate this connector, lift evenly across
the header, making sure that each side stays
parallel to each other.
If circumstances prevent the connectors from
staying parallel to each other, then one side
may be lifted as shown in the diagram. This
method is only approved if the connector is
mounted onto an extremely rigid circuit board.
If the board were to warp during this process
it may result in damage to the connector or its
solder joints.
Do not try to disconnect these connectors by
pulling on one side or a corner, or unmate it
while it is securely mounted onto a rigid FPC.
These actions may lead to deformities and
ultimately a damaged connector.
Pitch direction
Corner direction
As shown in the figure to the left, do not unmate
it from the width direction (front to back), it may
damage contacts.
Width direction
18
DF40 Series●0.4mm Pitch, 1.5 to 4.0mm Height, Board-to-Board and Board-to-FPC Connectors
Precautions when unmating a connector
B
The contact may peel away if there is
not enough rigidity in FPC.
Receptacle
FPC
When mounting the receptacle side to FPC
which does not have enough rigidity, the contact
may peel away soldered connection.
Header
We recommended to mount the header side to
the FPC.
Header
We have conducted evaluations on the
requirements needed for FPC rigidity. If you
need to mount the receptacle to the FPC,
contact your local Hirose Rep for this data.
FPC
Receptacle
Even when mounting the header side to FPC,
if the rigidity of FPC is low, the connector may
break as shown in the left figure. Please check
the strength and durability of FPC before using.
For the evaluation results of each item and FPC
rigidity, please contact us.
19
DF40 Series●0.4mm Pitch, 1.5 to 4.0mm Height, Board-to-Board and Board-to-FPC Connectors
USA:
USA:
USA:
HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS CHICAGO OFFICE HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE)
2300 Warrenville Road, Suite 150,
Downers Grove, IL 60515
Phone : +1-630-282-6700
http://www.hirose.com/us/
2841 Junction Ave, Suite 200
San Jose, CA. 95134
Phone : +1-408-253-9640
Fax : +1-408-253-9641
http://www.hirose.com/us/
17197 N. Laurel Park Drive, Suite 253,
Livonia, MI 48152
Phone : +1-734-542-9963
Fax : +1-734-542-9964
http://www.hirose.com/us/
THE NETHERLANDS:
GERMANY:
GERMANY:
HIROSE ELECTRIC EUROPE B.V.
Hogehillweg #8 1101 CC Amsterdam Z-O
Phone : +31-20-6557460
Fax : +31-20-6557469
HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH HIROSE ELECTRIC EUROPE B.V. NUREMBERG OFFICE
Schoenbergstr. 20, 73760 ostfildern
Phone : +49-711-456002-1
Fax : +49-711-456002-299
http://www.hirose.com/eu/
Neumeyerstrasse 22-26, 90411 Nurnberg
Phone : +49-911 32 68 89 63
Fax : +49-911 32 68 89 69
http://www.hirose.com/eu/
http://www.hirose.com/eu/
GERMANY:
FRANCE:
UNITED KINGDOM:
HIROSE ELECTRIC EUROPE B.V. HANOVER OFFICE
Bayernstr. 3, Haus C 30855 Langenhagen, Germany Regus La Garenne Colombes,Place de La Belgique,
HIROSE ELECTRIC EUROPE B.V. PARIS OFFICE
HIROSE ELECTRIC EUROPE BV (UK BRANCH)
4 Newton Court, Kelvin Drive, Knowlhill,
Phone : +49-511 97 82 61 30
Fax : +49-511 97 82 61 35
http://www.hirose.com/eu/
71 Boulevard National La Garenne Colombes, 92250, France Milton Keynes, MK5 8NH
Phone : +33 (0) 1 7082 3170
Fax : +33 (1) 7082 3101
Phone : +44-1908 202050
Fax : +44-1908 202058
http://www.hirose.com/eu/
http://www.hirose.com/eu/
CHINA:
CHINA:
CHINA:
HIROSE ELECTRIC (SHANGHAI) CO., LTD.
HIROSE ELECTRIC (SHANGHAI) CO.,LTD. BEIJING BRANCH HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD.
1601, Henderson Metropolitan, NO.300, East Nanjing A1001, Ocean International Center, Building 56# East 4th Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre,
Road, Huangpu District, Shanghai, China 200001
Phone : +86-21-6391-3355
Fax : +86-21-6391-3335
Ring Middle Road, ChaoYang District, Beijing, 100025
Phone : +86-10-5165-9332
Fax : +86-10-5908-1381
5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 518008
Phone : +86-755-8207-0851
Fax : +86-755-8207-0873
http://www.hirose.com/cn/
http://www.hirose.com/cn/
http://www.hirose.com/cn/
HONG KONG:
TAIWAN:
KOREA:
HIROSE ELECTRIC HONGKONG TRADING CO., LTD. HIROSE ELECTRIC TAIWAN CO., LTD.
Room 1001, West Wing, Tsim Sha Tsui Centre, 66 103 8F, No.87, Zhengzhou Rd., Taipei
Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong Phone : +886-2-2555-7377
HIROSE KOREA CO.,LTD.
250, Huimanggongwon-ro, Siheung-si,
Gyeonggi-do, Korea, 15083
Phone : +82-31-496-7000 or 7124
Fax : +82-31-496-7100
Phone : +852-2803-5338
Fax : +852-2591-6560
Fax : +886-2-2555-7350
http://www.hirose.com/tw/
http://www.hirose.com/hk/
http://www.hirose.co.kr/
SINGAPORE:
INDIA:
INDIA:
HIROSE ELECTRIC SINGAPORE PTE. LTD.
HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE
10 Anson Road #26-16, International Plaza Office NO.552, Regus-Green Boulevard, Level5, Tower C, Unit No-403, 4th Floor, No-84, Barton Centre, Mahatma
079903, Singapore
Sec62, Plot B-9A, Block B, Noida, 201301, Uttar Pradesh, India Gandhi (MG) Road, Bangalore 560 001, Karnataka, India
Phone : +65-6324-6113
Phone : +91-12-660-8018
Fax : +91-120-4804949
http://www.hirose.com/sg/
Phone : +91-80-4120 1907
Fax : +91-80-4120 9908
http://www.hirose.com/sg/
65-6324-6123
Fax : +
http://www.hirose.com/sg/
MALAYSIA:
THAILAND:
PENANG REPRESENTATIVE OFFICE
BANGKOK OFFICE (REPRESENTATIVE OFFICE)
1-21-01, Suntech @ Penang Cybercity (1164), Lintang Unit 4703, 47th FL., 1 Empire Tower, South Sathorn
Mayang Pasir 3,11950, Bayan Baru, Penang, Malaysia. Road, Yannawa, Sathorn, Bangkok 10120 Thailand
Phone : +604-619-2564
Fax : +604-619-2574
Phone : +66-2-686-1255
Fax : +66-2-686-3433
http://www.hirose.com/sg/
http://www.hirose.com/sg/
®
2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
+
+
TEL: 81-45-620-3526 Fax: 81-45-591-3726
http://www.hirose.com
http://www.hirose-connectors.com
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.
The contents of this catalog are current as of date of 04/2016. Contents are subject to change without notice for the purpose of improvements.
20
相关型号:
DF40C-24DP-0.4V(51)
Board Connector, 24 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal, ROHS COMPLIANT
HRS
DF40C-24DS-0.4V(51)
Card Edge Connector, 24 Contact(s), 2 Row(s), Female, Straight, 0.016 inch Pitch, Surface Mount Terminal, Locking, Black Insulator, Receptacle, ROHS COMPLIANT
HRS
DF40C-30DP-0.4V(51)
Board Connector, 30 Contact(s), 2 Row(s), Male, Straight, 0.016 inch Pitch, Surface Mount Terminal, Black Insulator, Receptacle, ROHS COMPLIANT
HRS
DF40C-30DS-0.4V(51)
Card Edge Connector, 30 Contact(s), 2 Row(s), Female, Straight, 0.016 inch Pitch, Surface Mount Terminal, Locking, Black Insulator, Receptacle, ROHS COMPLIANT
HRS
DF40C-34DP-0.4V(58)
Board Connector, 34 Contact(s), 2 Row(s), Male, Straight, 0.016 inch Pitch, Surface Mount Terminal, Locking, Black Insulator, Plug
HRS
DF40C-34DS-0.4V(58)
Board Connector, 34 Contact(s), 2 Row(s), Female, Straight, 0.016 inch Pitch, Surface Mount Terminal, Locking, Black Insulator, Receptacle
HRS
©2020 ICPDF网 联系我们和版权申明