DF6 [HRS]
3.96mm Pitch Connector Directly Mounted on Board;型号: | DF6 |
厂家: | HRS |
描述: | 3.96mm Pitch Connector Directly Mounted on Board |
文件: | 总4页 (文件大小:127K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
3.96mm Pitch Connector Directly Mounted on Board
DF6 Series
■Features
1. Service Efficiency Up
Conventional thick cables are directly mounted on the
board piece by piece, but connecterization has achieved
soldering services in a batch. This product enhances
soldering service efficiency.
2. Miniaturization
This product achieves miniaturization for thick cables.
Mounting height on board
Width
:
:
7.5mm
5.0mm
3. Board Prefixed Mechanism
Since the connector is softly press-fitted to the board for
insertion, it can be prefixed to the board.
Height: 7.5mm
width: 4.6mm
■Applications
Secondary power supply units for various equipment
Prefixed mechanism
B129
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
DF6 Series●3.96mm Pitch Connector Directly Mounted on Board
■Product Specifications
AWG 18 : 5A
Cable size AWG 20 : 4A
AWG 22 : 3A
Operating Temperature Range
Operating Moisture Range
Storage Temperature Range
Storage Humidity Range
-35 to +85ç (Note 1)
40 to 80%
Current rating
(Note 1)
Rating
-10 to +60ç (Note 2)
40 to 70% (Note 2)
Voltage rating
300V AC
Item
Specification
Condition
500V DC
1.Insulation Resistance 1000M ohms min.
2.Withstanding voltage
3.Contact Resistance
4.Vibration
No flashover or insulation breakdown.
15m ohms max.
No damage, cracks, or parts looseness.
1500V AC/1 minute
100mA
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
96 hours at temperature of 40ç and humidity of 90% to 95%
(-55ç: 30 minutes ➝15 to 35ç: 10 minutes➝85ç: 30 minutes➝ 5 to 35ç: 10 minutes ) 5 cycles
Flow: 250ç for 10 seconds
5.Humidity (Steady state) No damage, cracks, or parts looseness.
6.Temperature Cycle No damage, cracks, or parts looseness.
7. Resistance to Soldering heat No deformation of components affecting performance.
Manual soldering: 300ç for 3 seconds
Note 1: The rated current will be changed according to cable sizes for use.
Note 2: Includes temperature rise caused by current flow.
Note 3: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Note 4: Information contained in this catalog represents general requirements for this Series.Contact us for the drawings and specifications for
a specific part number shown.
■Material
Product
Part
Insulator
Brass
Material
Polyamide
Copper Alley
Finish
White
Remarks
Crimping Plug
UL94V-0
________
Crimping Contact for Plug
Tin plated
■Ordering Information
●Crimping Plug
DF6 - * P - 3.96 C
q
w
e
r
t
q Series Name
: DF 6
r Contact pitch: 3.96mm
t C: Crimping plug
w Number of contacts: 1~8, 10
e Connector type
P: Plug
●Crimping Contact
DF6A - 1822 PCF
q
w
e
q Applicable cable type
e Packaging type
None : Jacket dia. 1.5mm to 2.2mm
UL 1007
PCF: Plug contact, reel packaging
SC: Plug contact, bag packaging
A
: Jacket dia. 2.2mm to 2.9mm
UL 1015
w Applicable cable size
1822 : AWG#18~#22
B130
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
DF6 Series●3.96mm Pitch Connector Directly Mounted on Board
■Precrimping Plug
Photo: Contact Inserted
Part Number
DF6- 1P-3.96C
DF6- 2P-3.96C
DF6- 3P-3.96C
DF6- 4P-3.96C
DF6- 5P-3.96C
DF6- 6P-3.96C
DF6- 7P-3.96C
DF6- 8P-3.96C
DF6-10P-3.96C
CL No.
Number of Contacts
A
B
RoHS
YES
_____
546-0001-1
546-0002-4
546-0003-7
546-0004-0
546-0005-2
546-0006-5
546-0007-8
546-0008-0
546-0011-5
1
2
4.92
8.88
3.96
7.92
3
12.84
16.80
20.76
24.72
28.68
32.64
40.56
4
11.88
15.84
19.80
23.76
27.72
35.64
5
Contact View for Insertion
6
7
8
10
Note: A packaging quantity is delivered by the bag unit (100 pcs.).
■Crimping Contact
●Slip length
DF6-1822PC (F): 2.1mm to 2.6mm
DF6A-1822PC (F): 2.3mm to 2.8mm
●Applicable through-hole: 1.8 +0.15
0
Applicable Cable
Part Number
CL No.
Packaging Type
Quantity
A
B
C
RoHS
YES
UL style Jacket dia. AWG size Contact Construct
DF6 -1822PCF(05) 546-0009-3-05
DF6 -1822PC(05) 546-0010-2-05
DF6A-1822PCF(05) 546-0013-0-05
DF6A-1822PC(05) 546-0014-3-05
Reel
Bag
Reel
Bag
5,000
100
1007
1015
1.5 to 2.2mm AWG 18 34 cores/0.18mm
AWG 20 21 cores/0.18mm
10.2 1.5 1.2
10.5 1.7 1.4
3,000
100
2.2 to 2.9mm AWG 22 17 cores/0.16mm
Note 1. The applicable cable conductor is a tin plated and annealed copper wire.
Note 2. If other cables are used instead of the applicable cable, contact the Hirose Sales Department.
BApplicable Crimping Tools
TypeItem
Part Number
AP105-DF6-1822P
AP105-DF6A-1822P
CM-105
CL No.
Applicable Contact
( )
DF6 -1822PCF 05
901-4505-9
901-4520-2
901-0005-4
550-0174-9
550-0222-0
550-0170-8
Applicator
Press unit
(
)
DF6A-1822PCF 05
________
( )
DF6 -1822PC 05
DF6 -TA1822HC
DF6A-TA1822HC
DF-C-PO(A)
Manual crimping
tool
(
)
DF6A-1822PC 05
( )(
)
Extraction tool
DF6/DF6A-1822PC F 05
Note: If any trouble has been caused due to other tools, which are not designated by Hirose, Hirose never guarantee any products.
B131
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
DF6 Series●3.96mm Pitch Connector Directly Mounted on Board
BPrecautions
Flow: 250ç for 3 seconds
1.Recommended soldering
Manual soldering: 290ç for 2 seconds
condition
■After soldering, if a load is given to the cable where connector and cable contain heat, the jacket holding
member will be loosened. After soldering, the operation should be performed, after connector returns to room
temperature.
Refer to the "Nylon Connector Use Hand book".
2.Cleaning condition
Don't use solvent to degrade the cable jacket like trichloroethane.
In addition, avoid heat cleaning with solvent.
Refer to the "Nylon Connector Use Hand book".
3.Connecting condition
4.Precations
Slight discoloration on the insulating materials will not affect form, fit or function of the connectors.
Refer to "Nylon Connector Use Handbook"
B132
相关型号:
©2020 ICPDF网 联系我们和版权申明