DN30-20P(50) [HRS]
D Subminiature Connector, 20 Contact(s), Male, 0.1 inch Pitch, IDC Terminal, Locking, Plug,;型号: | DN30-20P(50) |
厂家: | HRS |
描述: | D Subminiature Connector, 20 Contact(s), Male, 0.1 inch Pitch, IDC Terminal, Locking, Plug, 连接器 |
文件: | 总8页 (文件大小:439K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
DN SERIES-NEW D SUBMINIATURE
INTERFACE CONNECTORS
General
The DN series are compact, rectangular multi-contact
connectors developed to meet the demand for smaller
and slimmer electronic equipment. 2.54 mm grid con-
tact position and Direct dip soldering on PCB enable
high density circuit designing at reduced cost.
Aluminum die-cast shell and Metallic shell areshieledto
prevent from Electro-Magnetic interference. 20, 26, 36
and 50 way available.
Features
1. 2.54 mm grid contact position enable high density
circuit designing.
6. Dip soldering connectors are provided with snap
clamps for temporarily fixing the connector on the
PCB.
7. IDC termination types are for standard 1.27 mm pitch
cables, and are available for two types of cables:
AWG26 and AWG28.
8. Crimp contact cables from AWG26 through AWG28.
9. Allows you to take out the cable vertically or hori-
zontally, as your application requires.
2. Stable quality due to the contact design based on
our field-proven SM series (D sub-connector).
3. One-touch lock system ensures perfect operation.
4. The cover case uses a thin, low-back compact design
that meets the needs of high density mounting. It
can be mounted between 17.78 millimeters (700mil)
substrates.
5. The cover case is made of aluminum diecast to
shield aginst electromagnetic waves In a combina-
tion with a connector metal shell, the cover case is
an ideal solution for noise.
Application
Office Automation, Computers, Communications Equipment, Factory Automation, Home Automation and other
commercial applications needing high density interconnections.
169
04/2009
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Specifications and Material
Main specifications
Main materials used
Aluminum dei-cash
Current capacity
3A
Shell
Silver coating
Black
Insulator
Contacts
PBT*
Rated voltage
AC200V
Phosphor bronze
Selective gold plating
Insulation
resistance
5000mΩon higher
at DC500V
*UL94V-0
Contact
resistance
20mΩor less
at DC100mA
Withstand
voltage
1 minute AC1000 Vrms
Ordering Information
(1) Series Number: DN
(2) Type
-
( )
26 S
DN 10
10: Right Angle DIp Type
30: IDC Plug Type
50: Crimp Type
(1) (2)
(3) (4) (8)
(3) No. of Pins: 20, 26, 36 and 50 way
(4) P: Plug
S: Receptacle
(5) Shell
-
-
CVE 1
DN
26
CVE1: Angle Cable Exit Shell
CV1: Straight Cable Exit Shell
(6) Applicable Wire
2628: AWG#26 ~ AWG#28
(7) Type of Contact Pin
PC1: Bulk Pin Contact
PC2: Chain Pin Contact
(8) Specification
(1)
(3)
(5)
-
DN 50
2628 PC 1
(50): RoHS compliant
(1) (2)
(6)
(7)
Cable specifications
N: Pin
Pin: AWG#28(7/0.127)
AWG#26(7/0.16)
170
04/2009
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Crimp Pin Housing
DN50-26P
Unit: mm
HRS No.
No.of pin
Part No.
A
B
C
RoHS
225-0016-3
225-0004-4
225-0005-7
225-0006-0
20
26
36
50
DN50-20P
DN50-26P
DN50-36P
DN50-50P
35.36 22.86 31.38
42.98 30.48 39
55.68 43.18 51.7
73.46 60.96 69.48
YES
IDC Plug
DN30-36P(50)
Unit: mm
HRS No.
No.of pin
Part No.
A
B
C
RoHS
225-0030-4-50
225-0029-5-50
225-0027-0-50
225-0028-2-50
20
26
36
50
DN30-20P(50)
DN30-26P(50)
DN30-36P(50)
DN30-50P(50)
35.36 29.1 31.38
42.98 36.7 39
YES
55.68 49.4 51.7
73.46 67.2 69.48
171
04/2009
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Angle Cable Exit Shell
DN-26-CVE1
Unit: mm
HRS No.
No.of pin
Part No.
A
B
C
RoHS
225-0019-1
225-0020-0
225-0021-3
225-0022-6
20
26
36
50
DN-20-CVE1
DN-26-CVE1
DN-36-CVE1
DN-50-CVE1
45.9 12.7
53.5 13.7
66.2 14.2
9
9.7
11
YES
84
14.2 12×13
Straight Cable Exit Shell
DN-26-CV1
Unit: mm
C RoHS
HRS No.
No.of pin
Part No.
A
B
225-0031-7
225-0024-1
225-0025-4
20
26
36
DN-20-CV1
DN-26-CV1
DN-36-CV1
45.9 13.7
53.5 13.7
66.2 14.2
9
9.7 YES
11
172
04/2009
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Right Angle P.C. Mount Receptacle
(Dip Post)
DN10-26S(50)
Unit: mm
HRS No.
No.of pin
Part No.
A
B
C
RoHS
225-0015-0-50
225-0001-6-50
225-0002-9-50
225-0003-1-50
20
26
36
50
DN10-20S(50)
DN10-26S(50)
DN10-36S(50)
DN10-50S(50)
32
38.9 22.86
39.6 46.5 30.48
52.3 59.2 43.18
YES
70.1
77 60.96
PCB Layout
mounting panel thickness 1.6mm
Unit: mm
No.of pin 20
26
36
50
A
B
32.0 39.6 52.3 70.1
22.86 30.48 43.18 60.96
PCB End
173
04/2009
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Straight P.C. Mount Receptacle
(Dip Post)
DN20B-26S(50)
Unit: mm
HRS No.
No.of pin
Part No.
A
B
C
D
RoHS
225-0045-1-50
225-0046-4-50
225-0047-7-50
225-0048-0-50
20
26
36
50
DN20B-20S(50)
DN20B-26S(50)
DN20B-36S(50)
DN20B-50S(50)
38.9 60.9 22.86 53.9
46.5 68.5 30.48 61.5
59.2 81.2 43.18 74.2
YES
77
99 60.96 92
PCB Layout
Contact No.1
min
min
Panel Cutout
Unit: mm
No.of pin
A
B
C
20
26
36
50
53.9
61.5
74.2
92
9
40.9
48.5
61.2
79
12
17
24
Note: 1. Use a 1.6-mm thick panel
2. The substrate reference drawing shows the connector-mounting
surface. The area marked with [ ] is to be prohibited from enter-
ing any pattern.
3. The substrate and panel are related to each other, with a 0/3.2
mounting hole as the reference point.
4. The panel is 1.6 millimeters thick.
174
04/2009
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Pin Crimp Terminal
DN50-2628PC1
(Bulk)
DN50-2628PC2
(Chain)
Note: Bulk in bags of 100pc. Chain on reels of 1,000pcs
HRS No.
Part No.
Remarks
RoHS
225-0007-2
225-0008-5
DN50-2628PC1
DN50-2628PC2
Loose piece contact
Strip contact
YES
Applicable Wire
Applicable wire: AWG No.26 ~ AWG No.28
Outer diameter of applicable wire
Unit: mm
50
Way
20
26
36
Max.
9.0
Max.
9.7
Max.
11.0
Max.
12.0
Outer diameter
Tooling (for Crimp Plug)
• CM-105 Crimp Maching
This machine has been carefully designed to meet
the many requests for advanced crimping machines
that can be used in a wider range of applications.
This machine offers easy setup adjustment and appli-
cator mounting. We are confident that the machine
will find many applications as an easy-to-use semi-
automatic machine for crimping strip contacts.
POWER SOURCE
TOTAL WEIGHT
PERFORMANCE
WORK RANGE
AC 100V 200W
75 kgs
Semi-Auto Machine
Hand Tool
DN50-TA2628HC
(CL250-0101-0)
CM-105
2,000-4,000 crimps per hour
Adaptable to other HIROSE dies
(CL901-0005-4)
Applicator (Die) 105-DN50
(CL901-0208-1)
175
04/2009
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Tooling (for IDC Plug)
Hand Press
Pressure Block
Universal Guide Plate
HRS No.
Part No.
HRS No.
Part No.
HRS No.
Part No.
902-0068-0
902-0069-3
902-0143-4
902-0144-7
DN30-26PB
DN30-36PB
DN30-20PB
DN30-50PB
902-0067-8
DN30-XXGP
Hi-Flex termination
press and accessories
550-0082-2
Hi-Flex Termination Press and Accessories
General
The Hi-Flex termination press and its accessories con-
nect the connectors to the HIF series ribbon cables more
securely and quickly.
Features
1. No incomplete connections. A preventive ratcht-type
device ensures against misconnections.
2. Prevents damage to connectors during connection.
The guide plate works as a stopper to prevent dam-
age to connectors due to connection pressure.
3. Easy to position the connector and cable. The guide
plate case guide and cable stopper help positioning.
4. Capable of cable connection at an intermediate point
when the cable stopper is removed.
176
04/2009
相关型号:
DN30-36P(50)
D Subminiature Connector, 36 Contact(s), Male, 0.1 inch Pitch, IDC Terminal, Locking, Plug
HRS
©2020 ICPDF网 联系我们和版权申明