EZ-H1-MU-1.0M [HRS]
Interconnection Device;
| 型号： | EZ-H1-MU-1.0M |
| 厂家： | 
HRS |
| 描述： | Interconnection Device 连接器 |
| 文件： | 总4页 (文件大小：110K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
NEW
Fiberoptic Interface Connector for Surface Mount Optical Module
EZ Series
Patents pending
■Features
Detachable Connector
1. Specifications.
Holding tool-Connector
Complies with surface mount optical module
interface specification, as standardized by the
following companies
Release tool-Module
(Patent pending):
Oki Electric lndustry Co., Ltd.,
Sumitomo Electric lndustries, Ltd.
Fujitsu Limited
Hirose Electric Co.,Ltd.
(π)Please ask the company above for EZ module.
2. Detachable structure
Detachable connector/module interface (See
Figure 1-Mating with module
Figure 1.), with easy to use simple tools.
-Surface mounted module can be re-soldered
-Module is packaged separating from interface
connector
Self aligning mating to module.
Lock
-Easy replaceable interface connector
3. Self aligning mating to the module
Built-in guide rails assure correct alignment and
hold of all components. (See Figure 2.)
4. Reduced number of parts
The number of parts has been greatly reduced
compared with existing optical connectors
(e.g.,FC,SC and MU).
Guide
■Applications
Figure 2-Self aligned locking mating
Optical terminal equipment, optical relays, optical
modules for measuring instruments, etc.
75
■Specifications (Note1)
Rating
Operation temperature
Storage temperature
-40ç to 85ç
-40ç to 85ç
Item
Test Conditions
Requirements
Insertion loss (Note2)
Wavelength 1310 nm (LD)
0.5 dB or less(πNote1)
Optical
performance
Return loss
Wavelength 1310 nm (LD)
Engagement in axial direction
40 dB or greater
Engagement force
19.6 N or less
0.98 N to 3.5 N
Holding force of adapter split sleeve 1.249 0.0005 mm diameter of ceramic gauge
Durability(Mating/Unmating) 30 times
Mechanical
Vibration frequency range: 10 to 55 Hz, single amplitude of 0.75 mm
performance Vibration
2
Acceleration: 98.1 m/s , for 2 hours in each of 3 directions
Optical performance must be
met after the test.
2
Acceleration of 981 m/s , 6 ms operation time
Shock
Sine half-wave waveform, for 10 cycles in each of the 3 axes
ç
Humidity resistance
85%, 85
No damage, cracks, or loose
parts.
ç
ç
Rapid change of temperature Temperature: -40 to 85 , 42 cycles
Enviremental
performance
ç
Temperature: 85
Heat resistance
Cold resistance
Salt-fog test
ç
Temperature: -40
48 hours exposure to 5% brine
No excessive corrosion observed
(πNote1): Specified in the temperature of 25ç, humidity 60% or less.
Note2: When connected with master cable or measurements.
■Materials
Part name
Plug casing
Spring
Material
Notes
PPS
UL94V-0
Piano wire or stainless steel
Copper alloy or zirconia
Zirconia
Split sleeve
Ferrule
■Dimensions
6.4
2.8+0.1
0
13
π All dimensions in mm.
76
■Cable assemblies
1. With SC connector
SC
EZ
(
13
)
(
35
)
L+20
m
%
0
Product No.
Optical fiber
SM-9.5/125
SM-9.5/125
Polishing form
AdPC
Length
0.5m
1m
Notes
EZ-H1-SC-0.5M
EZ-H1-SC-1.0M
SC connector
SC connector
AdPC
2. With FC connector
SC
EZ
(
13
)
(
35
)
L+20
m
%
0
Product No.
EZ-H1-FC-0.5M
EZ-H1-FC-1.0M
Optical fiber
SM-9.5/125
SM-9.5/125
Polishing form
AdPC
Length
0.5m
1m
Notes
FC connector
FC connector
AdPC
3. With MU connector
EZ
( )
30
(
13
)
L+20
m
%
0
Product No.
Optical fiber
SM-9.5/125
SM-9.5/125
Polishing form
AdPC
Length
0.5m
1m
Notes
EZ-H1-MU-0.5M
EZ-H1-MU-1.0M
MU connector
MU connector
AdPC
•Shown are examples of the series.
For information on specific lengths or connectors, contact Hirose Sales Office nearest you.
77
■Release / Holding tool
Product No.
EZ-T1-001
Notes
Release/Holding tool
EZ-T1-001-H
Replacement part of release tool
πIf the release tool (EZ-T-001) is damaged, replace it with
replacement part (EZ-T1-001-H).
BUsage of the tools
1. Mating sequence
2. Unmating sequence
Holding tool-Connecton
Holding tool-Connector
Module
Release tool-Module
2
cutout
1
1
3
Guide
3
2
4
■ Place the hoding tool(in the direction shown) over the
EZ connector, making sure that the FO cable clears the
cutout.
■ Mate the connector with the module untill the firm
locking.
■■Insert both pins of the release tool between module
and EZ connector as shown in the figure.
this will release the latches on the connector.
■ Remove the release tool in a upward direction.
■ Place the connector holding tool over the EZ connector
as shown in the figure.
■ Remove the holding tool in the direction opposite to the
initial direction.
■ Unmate the connector from the module by holding the
connector holding tool.
■ Remove the holding tool in a upward direction.
BUsage precautions
1. When separating the connector from the optical module, use the special jig so as not to apply an excessive load to the
optical module and the connector.
2. Do not apply a pulling force of 4.9 N or greater to the cable.
3. Do not bend the cable at a radius less than the permissible curve.
4. Use a ferrule tip cleaner for 0.125 mm diameter to clean the ferrule surface.
After cleaning, be careful that industrial paper waste or other dirt does not remain on the ferrule tip.
Note: Reprinting or duplication of this material is prohibited without written consent of Hirose Electric Co., Ltd.
78
相关型号：
©2020 ICPDF网 联系我们和版权申明