FH12-14(6)SA-1SH [HRS]
0.5mm and 1mm Pitch Connectors For FPC/FFC;
| 型号： | FH12-14(6)SA-1SH |
| 厂家： | 
HRS |
| 描述： | 0.5mm and 1mm Pitch Connectors For FPC/FFC PC |
| 文件： | 总19页 (文件大小：445K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
0.5mm and 1mm Pitch Connectors For FPC/FFC
FH12 Series
Flip-lock
ꢀFeatures
Rotating One-touch Mechanism
1. Ease of Use and Space Savings
q
Only one finger or 6.9N (Newtons) of force is required to
lock Hirose’s rotational actuator (flip-lock) as compared
to using 2 fingers and 39.2N to close a FFC/FPC
connector from our competition.
The Flip-Lock design also allows customers to place 2
or more connectors side by side as there is no need to
waste additional board space for a side latch.
2. Strengthened Lock Lever
The standard Flip-Lock requires only 2.0mm height
above the board. A strengthened lock lever is available
which only requires an additional 0.4mm.
w
3. Supports Thin FPC (0.18mm)
Hirose does not require double-sided FPC to have any
additional strengthening plate or stiffener and can therefore
support a thickness of as little as 0.18mm +/- 0.05.
4. Hirose Ensures Reliability
Hirose’s patented half tuning fork contacts maintain the
required normal force without relying on the connector
housing. With our competitor’s conventional products
the housing walls support the contact force, which does
not provide for long-term reliability.
e
5. Prevention of Solder Bridge
Excess solder cavity absorbs excessive solder and
avoids solder bridging.
6. Three different assembly types
FH12 is offered in Top & Bottom Contact and Vertical
Mount and offered in both a 0.5mm contact pitch as well
as a 1.0mm contact pitch (bottom contact only).
ꢀApplications
Notebook computers, printers, PDAs, digital cameras and
other compact devices for interconnecting the main circuit
board with the LCD, HDD or other device.
6
ꢀProduct Specifications
Current rating: 0.4A DC Operating Temperature Range:_40 to +70ç (Note 1) Storage Temperature Range:_10 to +50ç (Note 2)
Voltage rating: 50V AC Operating Humidity Range:Relative humidity, 90% max. Storage Humidity Range:Relative humidity, 90% max.
Rating
(Not dewed)
(Not dewed)
Applicable FPC
Item
t=0.3 0.05 Solder plating(Note 3)
t=0.18 0.05 ꢀor ꢁH12ꢁF-SF0.5SH
Specification
Conditions
1. Insulation resistance 500M ohms minimum
100V DC
2. Withstanding voltage No ꢀlashover or insulation breakdown.
150V AC/1 minute
1mA
3. Contact resistance
50m ohms maximum
Contact resistance: 50m ohms maximum
No damage, cracks, or parts dislocation.
4. Durability (Insertion/withdrawal)
20 cycles
No electrical discontinuity oꢀ 1µs or more
Contact resistance: 50m ohms maximum.
No damage, cracks, or parts dislocation.
ꢁrequency: 10 to 55 Hz, single amplitude oꢀ 0.75 mm,
2 hours in each oꢀ the 3 directions.
5. Vibration
6. Shock
No electrical discontinuity oꢀ 1µs or more
Contact resistance: 50m ohms maximum.
No damage, cracks, or parts dislocation.
2
Acceleration oꢀ 490 m/s , 11 ms duration,
sine halꢀFwave waveꢀorm, 3 cycles in each oꢀ the 3 axis.
Contact resistance: 50m ohms maximum.
7. Humidity(Steady state) Insulation resistance: 50M ohms maximum.
No damage, cracks, or parts dislocation.
96 hours at temperature oꢀ 40ç and humidity oꢀ 90% to 95%
5 cycles under conditions as ꢀollows;
Contact resistance: 50m ohms maximum.
8. Temperature Cycle
Insulation resistance: 50M ohms maximum.
No damage, cracks, or parts dislocation.
Temperature: F40
ç
/ 15 to 35
ç / 85ç / 15 to 35ç,
Time: 30 5 max.
30 5 max.(minutes)
/
/
/
No deꢀormation oꢀ
components aꢀꢀecting perꢀormance.
Reꢀlow: At the recommended temperature proꢀile
Manual soldering: 350 5ç ꢀor 3 seconds
9.Resistance to Soldering heat
Note 1: Includes temperature rise caused by current ꢀlow.
Note 2: The term "storage" reꢀers to products stored ꢀor long period oꢀ time prior to mounting and use. Operating Temperature Range and
Humidity range covers nonconducting condition oꢀ installed connectors in storage, shipment or during transportation.
Note 3: When ꢁPC is gold plated, the connector contacts should be also gold plated: Select the (05) speciꢀication.
ꢀMaterial
Part
Material
Polyamide
PPS
Finish
Color : Beige
Color : Deep brown
Solder plating
Solder plating
Remarks
UL94V-0
Insulator
Contact
Macal Fittings
Phosphor bronze
Brass
–––––––
ꢀOrdering Information
FH12 A - 10 (4) - S A - 0.5 SH (05)
q
w
e
r
t
y
u
i
o
q Series Name
w Blank : standard type
: FH12
t Contact alignment: Single
y Eccentric direction:
A : Top contact type
S : Type with strengthed lock lever
Blank : standard type
A : Eccentric type
F : Type with 0.18mm FPC End Thickness
e Standard type : Number of contacts
u Contacts Pitch : 0.5mm, 1mm
i Contact type
Eccentric type
r Standard type : Blank
:
Number of contacts in 0.5mm housing
SH
SV
:
:
SMT horizontal mounting type
SMT vertical mounting type
Eccentric type : Number of contacts
o Plating specification
No symbol: Solder plating
(05): Gold plating
7
BSeries Configuration
Pitch
Bottom Contact Type
Top Contact Type
Vertical mounting Type
FPC conductive surface
(bottom side)
FPC conductive
surface
FH12- -- S-0.5SH
P.12
Number of contacts 6, 10, 11, 12, 13, 14,
15, 16, 17, 18, 19, 20,
22, 24, 25, 26, 28, 30,
32, 33, 34, 36, 40, 45,
50, 53
0.5mm
Type with Strengthened Lock Lever
P.13
FH12S- -- S-0.5SH
Number of contacts 30, 40, 45, 50, 53
Type with 0.18mm FPC End Thickness
P.15
P.16
FH12A- -- S-0.5SH
FH12- -- S-0.5SV
P.14
FH12F- -- S-0.5SH
Number of contacts 10, 12 ,15, 16, 18, 20, Number of contacts 10, 12, 13, 15, 16, 17,
22, 24, 26, 28, 29, 30,
Number of contacts 6, 10, 12, 13, 14, 15, 16,
18, 20, 22, 24, 26, 30,
32, 33, 34, 36, 40, 42,
32, 33, 34, 36, 40, 45,
45, 50
18, 20, 22, 24, 26, 28,
49, 50
30, 32, (33), 34, 36, 40
FPC conductive surface
(bottom side)
1mm
P.18
Standard FH12- -- S-1SH
Eccentric FH12- -- (--) S-1SH
Standard
Number of contacts 5, 6, 7, 8, 9, 11,
16, 22, 26
P.19
FH12- -- S-1SV
Eccentric
Number of contacts 6, 7, 8, 16, 20, 22,
24
Number of contacts 4, 6, 8, 10, 11,
14, 19, 24
8
BConnector Operating Instructions & Precautions
ꢀBottom Contact Type (common for 0.5mm/1mm)
Operating Instruction
Precautions for Use
1. FPC/FFC Insertion
1 Lift up the lock lever.
1 Avoid grasping the lock lever with your fingers or
hooking the lever (especially with your fingernail).
The part is small and thin and could be damaged.
(The lock is released.)
The lock lever can be simply operated by flicking it
up with the fingernail of the thumb or forefinger.
2 Insert the FPC with the conductive surface fac-
ing down.
Insert the FPC so that it is perpendicular with
respect to the connector.
2 Please ensure that the FPC is properly inserted
into the connector insertion slot. Failing to insert
the FPC properly could cause FPC breakage and
conduction faults.
3 Press down the lock lever
When the FPC is partially inserted or there is an
extreme insertion offset, the lock level will engage
poorly or not at all. Should this happen, remove the
FPC with the removal method of 2-(1) and perform
the operation of 1-(1) again.
3 Due to the structure of the connectors, they do not
have strong resistance to upward pulling; there-
fore, support the FPC when a pulling force is
applied to it.
2. FPC/FFC Removal
1 Lift up the lock lever and pull out the FPC after the
lock is released.
9
ꢀTop Contact Type
Operating Instruction
Precautions for Use
1. FPC/FFC Insertion
1 Lift up the lock lever.
1 Avoid forcing the lock lever upward when the FPC
is not inserted. The part is small and thin and could
be damaged.
(The lock is released.)
The lock lever can be simply operated by flicking it
up with the fingernail of the thumb or forefinger.
2 Insert the FPC with the conductive surface fac-
ing up. Fully insert the FPC into the insertion
slot of the connector.
2 Avoid operation with only one side of the lock
lever at the time of locking. The use of only one
side will cause a locking fault.
FPC/FFC contacto surface
3 Firmly press down the lock lever on both sides.
The design is such that pressing only on one side
will not engage the lock, but incomplete pressing
will result in locking failure.
3 Avoid forced pulling of the FPC. Forced pulling will
cause the FPC to become disconnected or dam-
aged.
2. FPC/FFC Removal
1 Lift up the lock lever and pull out the FPC after the
lock is released.
10
ꢀVertical Mounting Type
Operating Instruction
Precautions for Use
1. FPC/FFC Insertion
1 Check that the lock lever is standing upright. If the
lock lever has fallen to the side, stand it upright.
1 Avoid grasping and twisting the lock lever with your
fingers or forcefully pressing the lock lever without
a cable inserted.
2 Insert the FPC vertically with the conductive side
(i.e., wire connection portion) of the FPC facing
away from the lock lever. Fully insert the FPC into
the insertion slot.
FPC/FFC contacto surface
2 Please ensure that the FPC is fully inserted into
the connector insertion slot. Failing to insert the
FPC properly could cause FPC breakage and
conduction faults.
FPC/FFC contacto surface
3 Press down the upright standing lock lever in the
direction of rotation.
2. FPC/FFC Removal
1 Press the lock lever upward and pull out the FPC
after the lock is released. This operation is easily
done by inserting your thumb and forefinger.
11
ꢀ0.5mm Pitch Bottom Contact Type
Ａ
0.5
（0.2）
Mated CrossFsectional Diagram
ꢁPC/ꢁꢁC Contact Surꢀace
（2.1）
（3.1）
（1.3）
Ｂ
Ｃ
Ｄ
4.6
5.6
Unit:mm
D
Part Number
CL No.
Number of Contacts
A
B
C
FH12-06S-0.5SH
FH12-10S-0.5SH
FH12-11S-0.5SH
FH12-12S-0.5SH
FH12-13S-0.5SH
FH12-14S-0.5SH
FH12-15S-0.5SH
FH12-16S-0.5SH
FH12-17S-0.5SH
FH12-18S-0.5SH
FH12-19S-0.5SH
FH12-20S-0.5SH
FH12-22S-0.5SH
FH12-24S-0.5SH
FH12-25S-0.5SH
FH12-26S-0.5SH
FH12-28S-0.5SH
FH12-30S-0.5SH
FH12-32S-0.5SH
FH12-33S-0.5SH
FH12-34S-0.5SH
FH12-36S-0.5SH
FH12-40S-0.5SH
FH12-45S-0.5SH
FH12-50S-0.5SH
FH12-53S-0.5SH
586-0582-5
586-0522-3
586-0600-5
586-0704-0
586-0549-0
586-0533-0
586-0523-6
586-0531-4
586-0606-1
586-0530-1
586-0534-2
586-0524-9
586-0532-7
586-0521-0
586-0692-3
586-0576-2
586-0612-4
586-0525-1
586-0681-7
586-0520-8
586-0617-8
586-0526-4
586-0527-7
586-0528-0
586-0529-2
586-0595-7
6
02.5
04.5
05.0
05.5
06.0
06.5
07.0
07.5
08.0
08.5
09.0
09.5
10.5
11.5
12.0
12.5
13.5
14.5
15.5
16.0
16.5
17.5
19.5
22.0
24.5
26.0
06.1
08.1
08.6
09.1
09.6
10.1
10.6
11.1
11.6
12.1
12.6
13.1
14.1
15.1
15.6
16.1
17.1
18.1
19.1
19.6
20.1
21.1
23.1
25.6
28.1
29.6
07.1
09.1
09.6
10.1
10.6
11.1
11.6
12.1
12.6
13.1
13.6
14.1
15.1
16.1
16.6
17.1
18.1
19.1
20.1
20.6
21.1
22.1
24.1
26.6
29.1
30.6
03.57
05.57
06.07
06.57
07.07
07.57
08.07
08.57
09.07
09.57
10.07
10.57
11.57
12.57
13.07
13.57
14.57
15.57
16.57
17.07
17.57
18.57
20.57
23.07
25.57
27.07
10
11
12
13
14
15
16
17
18
19
20
22
24
25
26
28
30
32
33
34
36
40
45
50
53
2
Note
2
2
2
2
Note
Note
Note
Note
Note 1 : Products are packaged in embossed tape. (2,000 pcs./reel)
Please order in multiples of 2,000.
Note
: If there is no problem with the connector height, we recommend the type with the
2
strengthened lock lever (FH12S--S-0.5SH).
Standard type connector height: 2 mm
Connector height of type with strengthened lock lever: 2.4 mm
12
ꢀ0.5mm Pitch Bottom Contact Type with Strengthened Lock Lever
A
0.5
(
)
0.2
Mated CrossFsectional Diagram
(
)
2.1
ꢁPC/ꢁꢁC Contact Surꢀace
(
)
(
)
1.3
3.1
B
C
D
4.6
5.6
Unit:mm
D
Part Number
CL No.
Number of Contacts
A
B
C
FH12S-30S-0.5SH 586-0667-6
FH12S-40S-0.5SH 586-0640-0
FH12S-45S-0.5SH 586-0665-0
FH12S-50S-0.5SH 586-0642-5
FH12S-53S-0.5SH 586-0691-0
30
40
45
50
53
14.5
19.5
22.0
24.5
26.0
18.1
23.1
25.6
28.1
29.6
19.1
24.1
26.6
29.1
30.6
15.57
20.57
23.07
25.57
27.07
Note: Products are packaged in embossed tape. (2,000 pcs./reel)
Please order in multiples of 2,000.
13
ꢀ0.5mm Pitch Bottom Contact Type with 0.18mm FPC End Thickness
A
Applicable FPC end thickness : 0.18 0.05
0.5
0.2
Mated CrossFsectional Diagram
(
)
(
)
2.15
ꢁPC Contact Surꢀace
(
)
(
)
3.15
1.25
B
C
D
4.6
5.6
Unit:mm
D
Part Number
CL No.
Number of Contacts
A
B
C
FH12F-06S-0.5SH 586-0672-6
FH12F-10S-0.5SH 586-0709-4
FH12F-12S-0.5SH 586-0653-1
FH12F-13S-0.5SH 586-0629-7
FH12F-14S-0.5SH 586-0655-7
FH12F-15S-0.5SH 586-0680-4
FH12F-16S-0.5SH 586-0673-9
FH12F-18S-0.5SH 586-0626-9
FH12F-20S-0.5SH 586-0636-2
FH12F-22S-0.5SH 586-0630-6
FH12F-24S-0.5SH 586-0632-1
FH12F-26S-0.5SH 586-0627-1
FH12F-28S-0.5SH 586-0643-8
FH12F-30S-0.5SH 586-0628-4
FH12F-32S-0.5SH 586-0705-3
6
02.5
04.5
05.5
06.0
06.5
07.0
07.5
08.5
09.5
10.5
11.5
12.5
13.5
14.5
15.5
16.0
16.5
17.5
19.5
06.1
08.1
09.1
09.6
10.1
10.6
11.1
12.1
13.1
14.1
15.1
16.1
17.1
18.1
19.1
19.6
20.1
21.1
23.1
07.1
09.1
10.1
10.6
11.1
11.6
12.1
13.1
14.1
15.1
16.1
17.1
18.1
19.1
20.1
20.6
21.1
22.1
24.1
03.57
05.57
06.57
07.07
07.57
08.07
08.57
09.57
10.57
11.57
12.57
13.57
14.57
15.57
16.57
17.07
17.57
18.57
20.57
10
12
13
14
15
16
18
20
22
24
26
28
30
32
33
34
36
40
FH12F-33S-0.5SH
--------------------
FH12F-34S-0.5SH 586-0677-0
FH12F-36S-0.5SH 586-0656-0
FH12F-40S-0.5SH 586-0635-0
Note: Products are packaged in embossed tape. (2,000 pcs./reel)
Please order in multiples of 2,000.
14
ꢀ0.5mm Pitch Top Contact Type
A
0.5
0.2
(
)
Mated CrossFsectional Diagram
(
)
2.1
ꢁPC/ꢁꢁC Contact Surꢀace
(
)
(
)
1.3
3.1
B
C
D
4.6
5.6
Unit:mm
E
Part Number
CL No.
Number of Contacts
A
B
C
D
FH12A-10S-0.5SH 586-0550-9
FH12A-12S-0.5SH 586-0696-4
FH12A-15S-0.5SH 586-0551-1
FH12A-16S-0.5SH 586-0552-4
FH12A-18S-0.5SH 586-0553-7
FH12A-20S-0.5SH 586-0554-0
FH12A-22S-0.5SH 586-0686-0
FH12A-24S-0.5SH 586-0555-2
FH12A-26S-0.5SH 586-0663-5
FH12A-28S-0.5SH 586-0725-0
FH12A-29S-0.5SH 586-0585-3
FH12A-30S-0.5SH 586-0556-5
FH12A-32S-0.5SH 586-0687-3
FH12A-33S-0.5SH 586-0570-6
FH12A-34S-0.5SH 586-0670-0
FH12A-36S-0.5SH 586-0662-2
FH12A-40S-0.5SH 586-0557-8
FH12A-42S-0.5SH 586-0698-0
FH12A-45S-0.5SH 586-0558-0
FH12A-50S-0.5SH 586-0559-3
10
12
15
16
18
20
22
24
26
28
29
30
32
33
34
36
40
42
45
50
9.1
8.35
9.35
4.5
9.5
10.5
12.0
12.5
13.5
14.5
15.5
16.5
17.5
18.5
19.0
19.5
20.5
21.0
21.5
22.5
24.5
25.5
27.0
29.5
5.57
6.57
10.1
11.6
12.1
13.1
14.1
15.1
16.1
17.1
18.1
18.6
19.1
20.1
20.6
21.1
22.1
24.1
25.1
26.6
29.1
5.5
10.85
11.35
12.35
13.35
14.35
15.35
16.35
17.35
17.85
18.35
19.35
19.85
20.35
21.35
23.35
24.35
25.85
28.35
7.0
8.07
7.5
8.57
8.5
9.57
9.5
10.57
11.57
12.57
13.57
14.57
15.07
15.57
16.57
17.07
17.57
18.57
20.57
21.57
23.07
25.57
10.5
11.5
12.5
13.5
14.0
14.5
15.5
16.0
16.5
17.5
19.5
20.5
22.0
24.5
Note 1 : Products are packaged in embossed tape. (2,000 pcs./reel)
Please order in multiples of 2,000.
Note
: The design is such that the FPC/FFC protrudes on an upward angle so that other
parts can be mounted beneath the PFC/FFC. In view of this, please take note of the
gap at the top surface of the connector.
2
15
ꢀ0.5mm Pitch Vertical mounting Type
Mated CrossFsectional Diagram
(
)
0.2
1
(
)
ꢁPC/ꢁꢁC Contact Surꢀace
0.15
1
0.52.50.5
ꢁ
(
)
4.25
(
A
B
)
1.75
0.5
(
)
C
D
E
3.8 Metal fitting dim ension
Unit:mm
Part Number
CL No.
Number of Contacts
A
B
C
D
E
F
4
4
4
4
4
4
4
4
8
8
8
8
8
8
8
8
8
8
8
8
FH12-10S-0.5SV
FH12-12S-0.5SV
FH12-13S-0.5SV
FH12-15S-0.5SV
FH12-16S-0.5SV
FH12-17S-0.5SV
FH12-18S-0.5SV
FH12-20S-0.5SV
FH12-22S-0.5SV
FH12-24S-0.5SV
FH12-26S-0.5SV
FH12-30S-0.5SV
FH12-32S-0.5SV
FH12-33S-0.5SV
FH12-34S-0.5SV
FH12-36S-0.5SV
FH12-40S-0.5SV
FH12-45S-0.5SV
FH12-49S-0.5SV
FH12-50S-0.5SV
586-0560-2
586-0615-2
586-0575-0
586-0561-5
586-0572-1
586-0601-8
586-0573-4
586-0562-8
586-0589-4
586-0563-0
586-0664-8
586-0564-3
586-0699-2
586-0565-6
586-0706-6
586-0641-2
586-0566-9
586-0567-1
586-0602-0
586-0568-4
10
12
13
15
16
17
18
20
22
24
26
30
32
33
34
36
40
45
49
50
08.4
09.4
09.9
10.9
11.4
11.9
12.4
13.4
14.4
15.4
16.4
18.4
19.4
19.9
20.4
21.4
23.4
25.9
27.9
28.4
06.9
07.9
08.4
09.4
09.9
10.4
10.9
11.9
12.9
13.9
14.9
16.9
17.9
18.4
18.9
19.9
21.9
24.4
26.4
26.9
04.5
05.5
06.0
07.0
07.5
08.0
08.5
09.5
10.5
11.5
12.5
14.5
15.5
16.0
16.5
17.5
19.5
22.0
24.0
24.5
06.5
07.5
08.0
09.0
09.5
10.0
10.5
11.5
12.5
13.5
14.5
16.5
17.5
18.0
18.5
19.5
21.5
24.0
26.0
26.5
08.2
09.2
09.7
10.7
11.2
11.7
12.2
13.2
14.2
15.2
16.2
18.2
19.2
19.7
20.2
21.2
23.2
25.7
27.7
28.2
Note 1 : Products are packaged in embossed tape. (1,000 pcs./reel)
Please order in multiples of 1,000.
16
B
Recommended FPC/FFC dimensions and Land/Metal Mask dimensions
ꢀ0.5mm Pitch Product
FPC/FFC dimensions
Land / Metal Mask dimensions
B
C
0.1
0.1
C
0.5 0.05
0.35 0.03(FPC)
0.3 0.03(FFC)
0.5 0.1
A
B
0.05
0.07
0.3 0.03(Land)
0.5 0.05
0.25 0.0(Metal mask)
A
0.05
Product Type
Types other than
those below
C Dimension
0.3 0.05min
Stiffener thickness should be 0.188 mm 7.5 mil min
Recommended metal mask thickness : t=0.15
(
)
Types with an FPC end
thickness of 0.18 mm
0.18 0.05
0.5mm Pitch
Bottom Contact
Type
Unit: mm
Unit: mm
Dimension
Dimension
Dimension
Number
Dimension
A
B
Number
A
B
A
B
C
A
B
C
Number
Number
of Contacts
of Contacts
of Contacts
of Contacts
6
02.5 03.5
04.5 05.5
05.0 06.0
05.5 06.5
06.0 07.0
06.5 07.5
07.0 08.0
07.5 08.5
08.0 09.0
08.5 09.5
09.0 10.0
09.5 10.5
10.5 11.5
11.5 12.5
25
12.0 13.0
12.5 13.5
13.5 14.5
14.0 15.0
14.5 15.5
15.5 16.5
16.0 17.0
16.5 17.5
17.5 18.5
19.5 20.5
20.5 21.5
22.0 23.0
24.5 25.5
26.0 27.0
6
02.5 08.1 04.5
04.5 10.1 06.5
05.0 10.6 07.0
05.5 11.1 07.5
06.0 11.6 08.0
06.5 12.1 08.5
07.0 12.6 09.0
07.5 13.1 09.5
08.0 13.6 10.0
08.5 14.1 10.5
09.0 14.6 11.0
09.5 15.1 11.5
10.5 16.1 12.5
11.5 17.1 13.5
25
26
28
29
30
32
33
34
36
40
42
45
50
53
12.0 17.6 14.0
12.5 18.1 14.5
13.5 19.1 15.5
14.0 19.6 16.0
14.5 20.1 16.5
15.5 21.1 17.5
16.0 21.6 18.0
16.5 22.1 18.5
17.5 23.1 19.5
19.5 25.1 21.5
20.5 26.1 22.5
22.0 27.6 24.0
24.5 30.1 26.5
26.0 31.6 28.0
10
11
12
13
14
15
16
17
18
19
20
22
24
26
28
29
30
32
33
34
36
40
42
45
50
53
10
11
12
13
14
15
16
17
18
19
20
22
24
0.5mm Pitch
Top Contact
Type
Even contact number
Odd contact number
No.1 contact
No.1 contact
A
0.1
A 0.1
0.8 0.1(Land)
0.8 0.1(Land)
0.65 0.05(Metal mask)
0.65 0.05(Metal mask)
0.5 0.05
0.35 0.03(FPC)
0.3 0.03(FFC)
0.3 0.05
0.5 0.05
0.5 0.05
0.6 0.1(Land)
0.6 0.1(Land)
1
1
0.05
0.05
1
1
0.05
0.05
0.5 0.05(Metal mask)
0.5 0.05(Metal mask)
1 0.05
0.5 0.1
A
B
0.05
0.07
B
0.05
B 0.05
1
0.05
Recommended metal mask thickness : t=0.15
-Set the stiffener thickness to 0.188 (7.5mil) min.
Unit: mm
Unit: mm
0.5mm Pitch
Vertical
Mounting Type
Dimension
Dimension
Dimension
Dimension
Number
A
B
Number
A
B
Number
A
B
Number
of Contacts
A
B
of Contacts
10
of Contacts
of Contacts
04.5 05.5
05.5 06.5
06.0 07.0
07.0 08.0
07.5 08.5
08.0 09.0
08.5 09.5
09.5 10.5
10.5 11.5
11.5 12.5
26
12.5 13.5
14.5 15.5
15.5 16.5
16.0 17.0
16.5 17.5
17.5 18.5
19.5 20.5
22.0 23.0
24.0 25.0
24.5 25.5
10
12
13
15
16
17
18
20
22
24
06.5 04.5
07.5 05.5
08.0 06.0
09.0 07.0
09.5 07.5
10.0 08.0
10.5 08.5
11.5 09.5
12.5 10.5
13.5 11.5
26
14.5 12.5
16.5 14.5
17.5 15.5
18.0 16.0
18.5 16.5
19.5 17.5
21.5 19.5
24.0 22.0
26.0 24.0
26.5 24.5
12
13
15
16
17
18
20
22
30
32
33
34
36
40
45
49
50
30
32
33
34
36
40
45
49
50
24
17
ꢀ1mm Pitch Type Bottom Contact Type
2.3
A
E
1.0
(0.2)
Mated CrossFsectional Diagram
(2.1)
ꢁPC/ꢁꢁC Contact Surꢀace
(3.1)
(1.3)
B
C
D
4.6
5.6
Unit:mm
Part Number
FH12-05S-1SH
FH12-06S-1SH
FH12-07S-1SH
FH12-08S-1SH
FH12-09S-1SH
FH12-11S-1SH
FH12-16S-1SH
FH12-22S-1SH
FH12-26S-1SH
CL No.
Number of Contacts
A
B
C
D
E
586-0591-6
586-0607-4
586-0535-5
586-0579-0
586-0540-5
586-0668-9
586-0536-8
586-0547-4
586-0592-9
5
6
04
05
06
07
08
10
15
21
25
03
05
07
09
10
13
18
23
08.6
09.6
10.6
11.6
12.6
14.6
19.6
25.6
29.6
08.1
10.1
12.1
14.1
15.1
18.1
23.1
28.1
09.6
10.6
11.6
12.6
13.6
15.6
20.6
26.6
30.6
09.1
11.1
13.1
15.1
16.1
19.1
24.1
29.1
06.07
07.07
08.07
09.07
10.07
12.07
17.07
23.07
27.07
05.57
07.57
09.57
11.57
12.57
15.57
20.57
25.57
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.8
2.8
2.8
2.8
2.8
2.8
2.8
2.8
7
8
9
11
16
22
26
4
( )
FH12-10 4 SA-1SH 586-0537-0
( )
FH12-14 6 SA-1SH 586-0538-3
6
( )
FH12-18 8 SA-1SH 586-0539-6
8
(
)
FH12-22 10 SA-1SH 586-0541-8
10
11
14
19
24
(
)
FH12-24 11 SA-1SH 586-0542-0
(
)
FH12-30 14 SA-1SH 586-0543-3
(
)
FH12-40 19 SA-1SH 586-0546-1
(
)
FH12-50 24 SA-1SH 586-0548-7
Note 1: Products are packaged in embossed tape. (2,000 pcs. per reel)
Please order in multiples of 2,000.
Note 2: The 1mm version of FH12 is constructed by loading every other contact into the 0.5mm housing.
When a housing designed for an odd number of 0.5mm pitch contacts is used; the spacing from the
edge to the first contact on either side is the same as the distance between each contact, 1.0mm.
Hirose considers this design to be a standard-type 1.0mm connector.
Note 2: An eccentric-type connector using a housing designed for an even number of 0.5mm pitch contacts
and consequently one side has 1.5mm distance from the edge to the first contact. (See FPC/FFC
dimensional drawing on page 19) The part number for the eccentric type describes the size of the
0.5mm housing used and lists the number of 1.0mm pitch contacts in parentheses () as shown in the
above table.
18
ꢀ1mm Pitch Vertical Mounting Type
Mated CrossFsectional Diagram
ꢁPC/ꢁꢁC Contact Surꢀace
(0.2)
2
(0.15)
0.52.50.5
2
ꢁ
(4.25)
(1.75)
A
B
1.0
(
)
C
D
E
3.8 M etalfitting dim ension
Unit:mm
Part Number
FH12-06S-1SV
FH12-07S-1SV
FH12-08S-1SV
FH12-16S-1SV
FH12-20S-1SV
FH12-22S-1SV
FH12-24S-1SV
CL No.
Number of Contacts
A
B
C
D
E
F
4
4
4
8
8
8
8
586-0605-9
586-0610-9
586-0593-1
586-0574-7
586-0634-7
586-0584-0
586-0594-4
6
7
09.9
10.9
11.9
19.9
23.9
25.9
27.9
08.4
09.4
10.4
18.4
22.4
24.4
26.4
05
06
07
15
19
21
23
08
09
10
18
22
24
26
09.7
10.7
11.7
19.7
23.7
25.7
27.7
8
16
20
22
24
Note: Products are packaged in embossed tape. (1,000 pcs. per reel)
Please order in multiples of 1,000.
19
BRecommended FPC/FFC dimensions and Land/Metal Mask dimensions
ꢀ1mm Pitch Product
FPC/FFC dimensions
Land / Metal Mask dimensions
Recommended metal mask thickness : t=0.15
πSet the stiffener thickness to 0.188 (7.5mil) min.
1mm Pitch
Bottom Contact
Type
Unit: mm
Unit: mm
Dimension
Dimension
Dimension
Dimension
A
B
C
A
B
C
A
B
C
D
A
B
C
D
Number
Number
Number
Number
of Contacts
of Contacts
of Contacts
of Contacts
5
04
05
06
07
08
06
07
08
09
10
12
17
23
27
1
1
1
1
1
1
1
1
1
4
6
8
03 05.5 1.5
05 07.5 1.5
07 09.5 1.5
5
04 10.6 07 1.5
05 11.6 08 1.5
06 12.6 09 1.5
07 13.6 10 1.5
08 14.6 11 1.5
4
6
8
03 10.106.5
05 12.108.5
07 14.110.5
2
2
2
2
2
2
2
2
6
7
8
9
6
7
8
9
10 09 11.5 1.5
11 10 12.5 1.5
14 13 15.5 1.5
19 18 20.5 1.5
24 23 25.5 1.5
10 09 16.112.5
11 10 17.113.5
14 13 20.116.5
19 18 25.121.5
24 23 30.126.5
11 10
16 15
22 21
26 25
11 10 16.6 13 1.5
16 15 21.6 18 1.5
22 21 27.6 24 1.5
26 25 31.6 28 1.5
1mm Pitch
Vertical
Mounting Type
Recommended metal mask thickness : t=0.15
-Set the stiffener thickness to 0.188 (7.5mil) min.
Unit: mm
Unit: mm
Dimension
Dimension
Number
Number
A
B
A
B
of Contacts
of Contacts
6
7
8
16
20
22
24
05
06
07
15
19
21
23
07
08
09
17
21
23
25
6
7
8
16
20
22
24
08
09
10
18
22
24
26
05
06
07
15
19
21
23
20
BPackaging Specification
Embossed Carrier Tape Dimensions
(
)
Horizontal Type Common to Bottom/Top Contact, 0.5mm/1mm Pitch
Flat surface for placement
with Automatic equipment
(2.0)
ꢀ0.5mm Pitch Bottom/Top Contact Type
Unit:mm
D
Dimension
Dimension
A
B
C
D
A
B
C
Number
of Contacts
Number
of Contacts
6
16
16
16
24
24
24
24
24
24
24
24
24
24
24
----------
----------
----------
----------
----------
----------
----------
----------
----------
----------
----------
----------
----------
----------
07.5
07.5
07.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
16.5
16.5
16.5
24.5
24.5
24.5
24.5
24.5
24.5
24.5
24.5
24.5
24.5
24.5
25
24
24
32
32
32
32
32
32
44
44
44
44
44
44
----------
----------
28.4
28.4
28.4
28.4
28.4
28.4
40.4
40.4
40.4
40.4
40.4
40.4
11.5
11.5
14.2
14.2
14.2
14.2
14.2
14.2
20.2
20.2
20.2
20.2
20.2
20.2
24.5
24.5
32.5
32.5
32.5
32.5
32.5
32.5
44.5
44.5
44.5
44.5
44.5
44.5
10
11
12
13
14
15
16
17
18
19
20
22
24
26
28
29
30
32
33
34
36
40
42
45
50
53
Note: 2,000 pcs. per reel
Unit:mm
D
ꢀ 1mm Pitch Bottom Contact Type
Dimension
Dimension
A
B
C
D
A
B
C
Number
of Contacts
Number
of Contacts
5
6
16
24
24
24
24
24
32
44
44
----------
----------
----------
----------
----------
----------
28.4
07.5
11.5
11.5
11.5
11.5
11.5
14.2
20.2
20.2
16.5
24.5
24.5
24.5
24.5
24.5
32.5
44.5
44.5
4
16
24
24
24
24
32
44
44
----------
----------
----------
----------
----------
28.4
07.5
11.5
11.5
11.5
11.5
14.2
20.2
20.2
16.5
24.5
24.5
24.5
24.5
32.5
44.5
44.5
6
7
8
8
10
11
14
19
24
9
11
16
22
26
40.4
40.4
40.4
40.4
Note: 2,000 pcs. per reel
21
Vertical Mounting Type (Common to 0.5mm/1mm Pitch)
Flat surface for placement
with Automatic equipment
(1.75)
ꢀ0.5mm Pitch Vertical mounting Type
Unit:mm
D
Dimension
Dimension
A
B
C
D
A
B
C
Number
of Contacts
Number
of Contacts
10
12
13
15
16
17
18
20
22
24
16
16
24
24
24
24
24
24
24
24
----------
----------
----------
----------
----------
----------
----------
----------
----------
----------
07.5
07.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
16.5
16.5
24.5
24.5
24.5
24.5
24.5
24.5
24.5
24.5
26
24
32
32
32
44
44
44
44
44
44
----------
28.4
28.4
28.4
40.4
40.4
40.4
40.4
40.4
40.4
11.5
14.2
14.2
14.2
20.2
20.2
20.2
20.2
20.2
20.2
24.5
32.5
32.5
32.5
44.5
44.5
44.5
44.5
44.5
44.5
30
32
33
34
36
40
45
49
50
Note: 1,000 pcs. per reel
Unit:mm
D
ꢀ
1mm Pitch Vertical mounting Type
Dimension
A
B
C
Number
of Contacts
6
7
24
24
24
32
44
44
44
----------
----------
----------
28.4
11.5
11.5
11.5
14.2
20.2
20.2
20.2
24.5
24.5
24.5
32.5
44.5
44.5
44.5
8
16
20
22
24
40.4
40.4
40.4
Note: 1,000 pcs. per reel
22
Reel Dimensions (Common to All Types)
End portion
Mounting portion
Lead portion (400mm min.)
Embossed carrier tape
Top cover tape
Blank portion
Blank portion
(10 pockets min.)
(10 pockets min.)
BRecommended Temperature Profile
Applicable condition
Reflow method
Solder
: IR reflow
:
Paste type 63sn/37Pb (Flux content: 11wt%)
Test board
: Glass epoxy 40∞80∞1.6mm
Metal mask thickness : 0.15mm
This temperature profile is a recommendation
The temperature may be slightly changed according to the
solder paste type and amount.
23
BFH12 Series FPC/FFC Construction (Recommended Specifications)
1. FFC
FFC : Flexible Flat Cable
Material Name
Material
Thickness (µm)
Hard copper foil with tin plating
35
Adhesive
Polyester
Adhesive
Stiffener
Polyester type
30
12
Polyester type
Polyester type
Total
30
188 (Note)
295
-Real tolerance of thickness dimension is on the order of 20 µm (275 to 315 µm)
Note: Use of a thicker FFC results in a stiffer lock action and the lock is more easily released.
A factor that contributes to thicker FFC is the use of 250 µm stiffener which is thicker than the standard (188 µm) product. This
results in a total thickness of 357 µm.
When using FFC, control of FFC thickness becomes easy if you indicate to us the thickness of the stiffener.
2. FPC
FPC : Flexible Printed Circuit
Material Name
Covering layer film
Cover adhesive
Surface treatment
Copper foil
Material
Thickness (µm)
Polyamide 1 mil
25
25
Solder plating
5
Cu
1oz
35
Base adhesive
Base film
25
Polyamide 1 mil
25
Reinforcement material adhesive Heat-hardened adhesive
30
Stiffener
Polyamide 7 mil
Total
175
295
3. Precautions
1. This specification is a recommendation for the construction of the FH12 Series FPC and FFC (t=0.3 0.05).
2. For details about the construction, please contact the FPC/FFC manufacturers.
24
相关型号：
FH12-14(6)SA-1SH(05)
Card Edge Connector, 14 Contact(s), 1 Row(s), Female, Right Angle, 0.039 inch Pitch, Surface Mount Terminal, Eject Lever, Brown Insulator,
HRS
FH12-14S-0.5SH(05)
Card Edge Connector, 14 Contact(s), 1 Row(s), Female, Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Eject Lever, Brown Insulator
HRS
FH12-14S-0.5SH(54)
Card Edge Connector, 14 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal
HRS
FH12-14S-0.5SH(55)
Card Edge Connector, 14 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal, ROHS COMPLIANT
HRS
FH12-15S-0.5SH(05)
Card Edge Connector, 15 Contact(s), 1 Row(s), Female, Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Eject Lever, Brown Insulator
HRS
FH12-15S-0.5SH(54)
Card Edge Connector, 15 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal
HRS
©2020 ICPDF网 联系我们和版权申明