FH12-30(55)SA-1SH(55)

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

0.5mm and 1mm Pitch Connectors For FPC/FFC

FH12 Series

Flip-lock

ꢀFeatures

Rotating One-touch Mechanism

1. Ease of Use and Space Savings

q

Only one finger or 6.9N (Newtons) of force is required

to lock Hirose’s rotational actuator (flip-lock) as

compared to using 2 fingers and 39.2N to close a

FFC/FPC connector from our competition.

The Flip-Lock design also allows customers to place 2

or more connectors side by side as there is no need to

waste additional board space for a side latch.

2. Strengthened Flip-lock Actuator

The standard Flip-Lock requires only 2.0mm height

above the board. A strengthened lock lever is available

which only requires an additional 0.4mm.

w

3. Supports Thin FPC (0.18mm)

Hirose does not require double-sided FPC to have any

additional strengthening plate or stiffener and can

therefore support a thickness of as little as 0.18mm +/-

0.05.

4. Hirose Ensures Reliability

Hirose’s patented half tuning fork contacts maintain

the required normal force without relying on the

connector housing. With our competitor’s conventional

products the housing walls support the contact force,

which does not provide for long-term reliability.

e

5. Prevention of Solder Bridge

Excess solder cavity absorbs excessive solder and

avoids solder bridging.

6. Three different assembly types

FH12 is offered in Top & Bottom Contact and Vertical

Mount and offered in both a 0.5mm contact pitch as

well as a 1.0mm contact pitch (bottom contact only).

2010.9

1

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

FH12 Seriesꢀ0.5mm and 1mm Pitch Connectors For FPC/FFC

ꢀProduct Specifications

Current rating: 0.5A DC(Note 1) Operating Temperature Range:_40 to +85ç (Note 2) Storage Temperature Range:_10 to +50ç (Note 3)

Rating

Voltage rating: 50V AC

Operating Humidity Range:Relative humidity, 90% max. Storage Humidity Range:Relative humidity, 90% max.

(Not dewed)

Applicable FPC

Item

Gold

plated

t=0.3 0.05

t=0.18 0.05 ꢀor ꢁH12ꢁF-SF0.5SH

Conditions

Specification

1. Insulation resistance 500M ohms minimum

2. Withstanding voltage No ꢀlashover or insulation breakdown.

100V DC

150V AC/1 minute

1mA

3. Contact resistance

50m ohms maximum

Contact resistance: 50m ohms maximum

No damage, cracks, or parts dislocation.

4. Durability (Insertion/withdrawal)

20 cycles

No electrical discontinuity oꢀ 1µs or more

Contact resistance: 50m ohms maximum.

No damage, cracks, or parts dislocation.

ꢁrequency: 10 to 55 Hz, single amplitude oꢀ 0.75 mm,

2 hours in each oꢀ the 3 directions.

10 cycles

5. Vibration

6. Shock

No electrical discontinuity oꢀ 1µs or more

Contact resistance: 50m ohms maximum.

No damage, cracks, or parts dislocation.

2

Acceleration oꢀ 981 m/s , 6 ms duration,

sine halꢀFwave waveꢀorm, 3 cycles in each oꢀ the 3 axis.

Contact resistance: 50m ohms maximum.

7. Humidity(Steady state) Insulation resistance: 50M ohms minimum.

No damage, cracks, or parts dislocation.

96 hours at 40ç and humidity oꢀ 90% to 95%

Contact resistance: 50m ohms maximum.

Temperature: F40ç / 15 to 35ç / 85ç / 15 to 35ç,

8. Temperature Cycle

Insulation resistance: 50M ohms minimum.

No damage, cracks, or parts dislocation.

Time: 30 / 2 to 3 / 30 / 2 to 3(minutes)

5 cycles

No deꢀormation oꢀ

components aꢀꢀecting perꢀormance.

Reꢀlow: At the recommended temperature proꢀile

Manual soldering: 350 10ç ꢀor 5 seconds

9.Resistance to Soldering heat

Note 1: When passing the current through all oꢀ the contacts,use 70% oꢀ the current rating.

Note 2: Includes temperature rise caused by current ꢀlow.

Note 3: The term "storage" reꢀers to products stored ꢀor long period oꢀ time prior to mounting and use. Operating Temperature Range and

Humidity range covers nonconducting condition oꢀ installed connectors in storage, shipment or during transportation.

Note 4: Inꢀormation contained in this catalog represents general requirements ꢀor this Series.

Contact us ꢀor the drawings and speciꢀications ꢀor a speciꢀic part number shown.

ꢀMaterial

Part

Insulator

Actuator

Material

Polyamide, LCP(60 pos.)

PPS

Finish

Color : Beige

Color : Dark brown

Gold plated

Remarks

UL94V-0

Contact

Phosphor bronze

Brass

–––––––

Metal Fittings

Tin plated

ꢀOrdering Information

--

FH 12 A - 10 (4) - S A - 0.5 SH ( )

q

w

e

r

t

y

u

i

o

!

q Series Name

w Series No.

: FH

: 12

y Contact alignment: Single

u Eccentric direction:

e Blank : standard type

A : Top contact type

Blank : standard type

A : Eccentric type

S : Type with strengthed flip-lock actuator

F : Type with 0.18mm FPC End Thickness

r Standard type : Number of contacts

i Contacts Pitch : 0.5mm, 1mm

o Contact type

SH

SV

:

SMT horizontal mounting type

SMT vertical mounting type

Eccentric type

: Number of contacts in 0.5mm housing

t Standard type : Blank

Eccentric type : Number of contacts

! Plating specification

(54) : Selective gold plated

(55) : Gold plated

2

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

FH12 Seriesꢀ0.5mm and 1mm Pitch Connectors For FPC/FFC

ꢀSeries Configuration

Pitch

Bottom Contact Type

Top Contact Type

Vertical mounting Type

FPC conductive surface

(bottom side)

FPC conductive

surface

FH12- -- S-0.5SH

P.4

Number of contacts 6, 8, 10, 11, 12, 13,

14, 15, 16, 17, 18, 19,

20, 22, 24, 25, 26, 28,

30, 32, 33, 34, 35, 36,

40, 45, 50, 53

0.5mm

Type with Strengthened Lock Lever

P.5

FH12S- -- S-0.5SH

Number of contacts 30, 40, 45, 50, 53

Type with 0.18mm FPC End Thickness

P.7

P.8

FH12A- -- S-0.5SH

FH12- -- S-0.5SV

P.6

FH12F- -- S-0.5SH

Number of contacts 10, 12 ,15, 16, 18, 20, Number of contacts 10, 12, 13, 15, 16, 17,

22, 24, 26, 28, 29, 30,

Number of contacts 6, 8, 10, 12, 13, 14, 15,

18, 20, 22, 24, 26, 30,

32, 33, 34, 36, 40, 42,

32, 33, 34, 36, 40, 45,

45, 50

16, 18, 20, 22, 24, 25,

49, 50, 60

26, 28, 30, 32, 34, 36, 40

FPC conductive surface

(bottom side)

1mm

P.9

Standard FH12- -- S-1SH

Eccentric FH12- -- (--) SA-1SH

Standard

Number of contacts 5, 6, 7, 8, 9, 11,

12,16,17,22,26

P.10

FH12- -- S-1SV

Eccentric

Number of contacts 6, 7, 8, 16, 20, 22,

24

Number of contacts 4, 6, 8, 10, 11,

14, 19, 24

3

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

FH12 Seriesꢀ0.5mm and 1mm Pitch Connectors For FPC/FFC

A

ꢀ0.5mm Pitch Bottom Contact Type

0.5

(0.2)

Mated CrossFsectional Diagram

ꢁPC/ꢁꢁC Contact Surꢀace

(2.1)

(3.1)

(1.3)

B

C

D

4.6

5.6

Note 1 : The coplanarity of each terminal lead within specified dimension is 0.1 mm Max.

Note 2 : Packaged on tape and reel only. Check packaging specification.

Note 3 : Slight variations in color of the plastic compounds do not affect form, fit or function of the connector.

Note 4 : After reflow, the terminal plating may change color, however this does not represent a quality issue.

Note 5 : If there is no problem with the connector height, we recommend the type with the strengthened Flip-

lock actuator (FH12S-*S-0.5SH). Standard type connector height: 2 mm Connector height of type with

strengthened Flip-lock actuator: 2.4 mm

Unit:mm

Part Number

CL No.

Number of Contacts

A

B

C

D

6

2.5

06.1

07.1

08.1

08.6

09.1

09.6

10.1

10.6

11.1

11.6

12.1

12.6

13.1

14.1

15.1

15.6

16.1

17.1

18.1

19.1

19.6

20.1

20.6

21.1

23.1

25.6

28.1

29.6

7.1

3.57

FH12-6S-0.5SH(--)

FH12-8S-0.5SH(--)

586-0582-5---

586-0744-5---

8

3.5

8.1

4.57

10

11

12

13

14

15

16

17

18

19

20

22

24

25

26

28

30

32

33

34

35

36

40

45

50

53

4.5

9.1

5.57

FH12-10S-0.5SH(--) 586-0522-3---

FH12-11S-0.5SH(--) 586-0600-5---

FH12-12S-0.5SH(--) 586-0704-0---

FH12-13S-0.5SH(--) 586-0549-0---

FH12-14S-0.5SH(--) 586-0533-0---

FH12-15S-0.5SH(--) 586-0523-6---

FH12-16S-0.5SH(--) 586-0531-4---

FH12-17S-0.5SH(--) 586-0606-1---

FH12-18S-0.5SH(--) 586-0530-1---

FH12-19S-0.5SH(--) 586-0534-2---

FH12-20S-0.5SH(--) 586-0524-9---

FH12-22S-0.5SH(--) 586-0532-7---

FH12-24S-0.5SH(--) 586-0521-0---

FH12-25S-0.5SH(--) 586-0692-3---

FH12-26S-0.5SH(--) 586-0576-2---

FH12-28S-0.5SH(--) 586-0612-4---

FH12-30S-0.5SH(--) 586-0525-1---

FH12-32S-0.5SH(--) 586-0681-7---

FH12-33S-0.5SH(--) 586-0520-8---

FH12-34S-0.5SH(--) 586-0617-8---

FH12-35S-0.5SH(--) 586-0740-4---

FH12-36S-0.5SH(--) 586-0526-4---

FH12-40S-0.5SH(--) 586-0527-7---

FH12-45S-0.5SH(--) 586-0528-0---

FH12-50S-0.5SH(--) 586-0529-2---

FH12-53S-0.5SH(--) 586-0595-7---

5.0

9.6

6.07

5.5

10.1

10.6

11.1

11.6

12.1

12.6

13.1

13.6

14.1

15.1

16.1

16.6

17.1

18.1

19.1

20.1

20.6

21.1

21.6

22.1

24.1

26.6

29.1

30.6

6.57

6.0

7.07

6.5

7.57

7.0

8.07

7.5

8.57

8.0

9.07

8.5

9.57

9.0

10.07

10.57

11.57

12.57

13.07

13.57

14.57

15.57

16.57

17.07

17.57

18.07

18.57

20.57

23.07

25.57

27.07

9.5

10.5

11.5

12.0

12.5

13.5

14.5

15.5

16.0

16.5

17.0

17.5

19.5

22.0

24.5

26.0

5

Note

5

Note

Note 1 : Embossed tape reel packaging (2,000 pieces/reel). Order by number of reels.

Note 2 : (**):Specification. Refer to ordering information.

4

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

FH12 Seriesꢀ0.5mm and 1mm Pitch Connectors For FPC/FFC

ꢀ0.5mm Pitch Bottom Contact Type with Strengthened Flip-lock Actuator

A

0.5

(

)

0.2

Mated CrossFsectional Diagram

(

)

2.1

ꢁPC/ꢁꢁC Contact Surꢀace

(

)

(

)

1.3

3.1

B

C

D

4.6

5.6

Note 1 : The coplanarity of each terminal lead within specified dimension is 0.1 mm Max.

Note 2 : Packaged on tape and reel only. Check packaging specification.

Note 3 : Slight variations in color of the plastic compounds do not affect form, fit or function of the connector.

Note 4 : After reflow, the terminal plating may change color, however this does not represent a quality issue.

Unit:mm

Part Number

CL No.

Number of Contacts

A

B

C

D

30

40

45

50

53

14.5

19.5

22.0

24.5

26.0

18.1

23.1

25.6

28.1

29.6

19.1

24.1

26.6

29.1

30.6

15.57

20.57

23.07

25.57

27.07

FH12S-30S-0.5SH(--) 586-0667-6---

FH12S-40S-0.5SH(--) 586-0640-0---

FH12S-45S-0.5SH(--) 586-0665-0---

FH12S-50S-0.5SH(--) 586-0642-5---

FH12S-53S-0.5SH(--) 586-0691-0---

Note 1 : Embossed tape reel packaging (2,000 pieces/reel).

Order by number of reels.

Note 2 : Indicates the specification. For details, please refer to the column "composition of product number".

5

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

FH12 Seriesꢀ0.5mm and 1mm Pitch Connectors For FPC/FFC

ꢀ0.5mm Pitch Bottom Contact Type with 0.18mm FPC End Thickness

A

Applicable FPC end thickness : 0.18 0.05

0.5

0.2

Mated CrossFsectional Diagram

(

)

(

)

2.15

ꢁPC Contact Surꢀace

(

)

(

)

3.15

1.25

B

C

D

4.6

5.6

Note 1 : The coplanarity of each terminal lead within specified dimension is 0.1 mm Max.

Note 2 : Packaged on tape and reel only. Check packaging specification.

Note 3 : Slight variations in color of the plastic compounds do not affect form, fit or function of the connector.

Note 4 : After reflow, the terminal plating may change color, however this does not represent a quality issue.

Unit:mm

Part Number

CL No.

Number of Contacts

A

B

C

D

ꢁH12ꢁF6SF0.5SH(--)

ꢁH12ꢁF8SF0.5SH(--)

586F0672F6F--

586F0738F2F--

6

2.5

6.1

7.1

3.57

8

3.5

7.1

8.1

4.57

ꢁH12ꢁF10SF0.5SH(--) 586F0709F4F--

ꢁH12ꢁF12SF0.5SH(--) 586F0653F1F--

ꢁH12ꢁF13SF0.5SH(--) 586F0629F7F--

ꢁH12ꢁF14SF0.5SH(--) 586F0655F7F--

ꢁH12ꢁF15SF0.5SH(--) 586F0680F4F--

ꢁH12ꢁF16SF0.5SH(--) 586F0673F9F--

ꢁH12ꢁF18SF0.5SH(--) 586F0626F9F--

ꢁH12ꢁF20SF0.5SH(--) 586F0636F2F--

ꢁH12ꢁF22SF0.5SH(--) 586F0630F6F--

ꢁH12ꢁF24SF0.5SH(--) 586F0632F1F--

ꢁH12ꢁF25SF0.5SH(--) 586F0733F9F--

ꢁH12ꢁF26SF0.5SH(--) 586F0627F1F--

ꢁH12ꢁF28SF0.5SH(--) 586F0643F8F--

ꢁH12ꢁF30SF0.5SH(--) 586F0628F4F--

ꢁH12ꢁF32SF0.5SH(--) 586F0705F3F--

ꢁH12ꢁF34SF0.5SH(--) 586F0677F0F--

ꢁH12ꢁF36SF0.5SH(--) 586F0656F0F--

ꢁH12ꢁF40SF0.5SH(--) 586F0635F0F--

10

12

13

14

15

16

18

20

22

24

25

26

28

30

32

34

36

40

4.5

8.1

9.1

5.57

5.5

9.1

10.1

10.6

11.1

11.6

12.1

13.1

14.1

15.1

16.1

16.6

17.1

18.1

19.1

20.1

21.1

22.1

24.1

6.57

6.0

9.6

7.07

6.5

10.1

10.6

11.1

12.1

13.1

14.1

15.1

15.6

16.1

17.1

18.1

19.1

20.1

21.1

23.1

7.57

7.0

8.07

7.5

8.57

8.5

9.57

9.5

10.57

11.57

12.57

13.07

13.57

14.57

15.57

16.57

17.57

18.57

20.57

10.5

11.5

12.0

12.5

13.5

14.5

15.5

16.5

17.5

19.5

Note 1 : Embossed tape reel packaging (2,000 pieces/reel).

Order by number of reels.

Note 2 : Indicates the specification. For details, please refer to the column "composition of product number".

6

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

FH12 Seriesꢀ0.5mm and 1mm Pitch Connectors For FPC/FFC

A

B

ꢀ0.5mm Pitch Top Contact Type

Mated CrossFsectional Diagram

C

0.5

(0.2)

(1.9)

ꢁPC/ꢁꢁC Contact Surꢀace

(1.45)

5

(5)

6.2

D

E

(0.45)

0.8

1.45

Note 1 : The coplanarity of each terminal lead within specified dimension is 0.1 mm Max.

Note 2 : Packaged on tape and reel only. Check packaging specification.

Note 3 : Slight variations in color of the plastic compounds do not affect form, fit or function of the connector.

Note 4 : After reflow, the terminal plating may change color, however this does not represent a quality issue.

Note 5 : If there is no problem with the connector height, we recommend the type with the strengthened Flip-

lock actuator (FH12S-*S-0.5SH). Standard type connector height: 2 mm Connector height of type with

strengthened Flip-lock actuator: 2.4 mm

Unit:mm

Part Number

CL No.

Number of Contacts

A

B

C

D

E

ꢁH12AF10SF0.5SH(--) 586F0550F9F--

ꢁH12AF12SF0.5SH(--) 586F0696F4F--

ꢁH12AF15SF0.5SH(--) 586F0551F1F--

ꢁH12AF16SF0.5SH(--) 586F0552F4F--

ꢁH12AF18SF0.5SH(--) 586F0553F7F--

ꢁH12AF20SF0.5SH(--) 586F0554F0F--

ꢁH12AF22SF0.5SH(--) 586F0686F0F--

ꢁH12AF24SF0.5SH(--) 586F0555F2F--

ꢁH12AF26SF0.5SH(--) 586F0663F5F--

ꢁH12AF28SF0.5SH(--) 586F0725F0F--

ꢁH12AF29SF0.5SH(--) 586F0585F3F--

ꢁH12AF30SF0.5SH(--) 586F0556F5F--

ꢁH12AF32SF0.5SH(--) 586F0687F3F--

ꢁH12AF33SF0.5SH(--) 586F0570F6F--

ꢁH12AF34SF0.5SH(--) 586F0670F0F--

ꢁH12AF36SF0.5SH(--) 586F0662F2F--

ꢁH12AF40SF0.5SH(--) 586F0557F8F--

ꢁH12AF42SF0.5SH(--) 586F0698F0F--

ꢁH12AF45SF0.5SH(--) 586F0558F0F--

ꢁH12AF50SF0.5SH(--) 586F0559F3F--

10

12

15

16

18

20

22

24

26

28

29

30

32

33

34

36

40

42

45

50

9.1

8.35

4.5

9.5

5.57

10.1

11.6

12.1

13.1

14.1

15.1

16.1

17.1

18.1

18.6

19.1

20.1

20.6

21.1

22.1

24.1

25.1

26.6

29.1

9.35

5.5

10.5

12.0

12.5

13.5

14.5

15.5

16.5

17.5

18.5

19.0

19.5

20.5

21.0

21.5

22.5

24.5

25.5

27.0

29.5

6.57

10.85

11.35

12.35

13.35

14.35

15.35

16.35

17.35

17.85

18.35

19.35

19.85

20.35

21.35

23.35

24.35

25.85

28.35

7.0

8.07

7.5

8.57

9.57

8.5

9.5

10.57

11.57

12.57

13.57

14.57

15.07

15.57

16.57

17.07

17.57

18.57

20.57

21.57

23.07

25.57

10.5

11.5

12.5

13.5

14.0

14.5

15.5

16.0

16.5

17.5

19.5

20.5

22.0

24.5

Note 1 : Embossed tape reel packaging (2,000 pieces/reel).

Order by number of reels.

Note 2 : (**):Specification. Refer to ordering information.

7

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

FH12 Seriesꢀ0.5mm and 1mm Pitch Connectors For FPC/FFC

ꢀ0.5mm Pitch Vertical mounting Type

Mated CrossFsectional Diagram

(

)

0.2

1

(

)

ꢁPC/ꢁꢁC Contact Surꢀace

0.15

1

0.5

2.5

0.5

ꢁ

(

)

4.25

(

A

B

)

1.75

0.5

C

D

E

Note 1 : The coplanarity of each terminal lead within specified dimension is 0.1 mm Max.

Note 2 : Packaged on tape and reel only. Check packaging specification.

Note 3 : Slight variations in color of the plastic compounds do not affect form, fit or function of the connector.

Note 4 : After reflow, the terminal plating may change color, however this does not represent a quality issue.

Unit:mm

Part Number

CL No.

Number of Contacts

A

B

C

D

E

F

4

8

10

12

13

15

16

17

18

20

22

24

26

30

32

33

34

36

40

45

49

50

60

8.4

6.9

4.5

6.5

8.2

ꢁH12F10SF0.5SV(--) 586F0560F2F--

ꢁH12F12SF0.5SV(--) 586F0615F2F--

ꢁH12F13SF0.5SV(--) 586F0575F0F--

ꢁH12F15SF0.5SV(--) 586F0561F5F--

ꢁH12F16SF0.5SV(--) 586F0572F1F--

ꢁH12F17SF0.5SV(--) 586F0601F8F--

ꢁH12F18SF0.5SV(--) 586F0573F4F--

ꢁH12F20SF0.5SV(--) 586F0562F8F--

ꢁH12F22SF0.5SV(--) 586F0589F4F--

ꢁH12F24SF0.5SV(--) 586F0563F0F--

ꢁH12F26SF0.5SV(--) 586F0664F8F--

ꢁH12F30SF0.5SV(--) 586F0564F3F--

ꢁH12F32SF0.5SV(--) 586F0699F2F--

ꢁH12F33SF0.5SV(--) 586F0565F6F--

ꢁH12F34SF0.5SV(--) 586F0706F6F--

ꢁH12F36SF0.5SV(--) 586F0641F2F--

ꢁH12F40SF0.5SV(--) 586F0566F9F--

ꢁH12F45SF0.5SV(--) 586F0567F1F--

ꢁH12F49SF0.5SV(--) 586F0602F0F--

ꢁH12F50SF0.5SV(--) 586F0568F4F--

ꢁH12F60SF0.5SV(--) 586F0735F4F--

9.4

7.9

5.5

7.5

9.2

9.9

8.4

6.0

8.0

9.7

10.9

11.4

11.9

12.4

13.4

14.4

15.4

16.4

18.4

19.4

19.9

20.4

21.4

23.4

25.9

27.9

28.4

33.4

9.4

7.0

9.0

10.7

11.2

11.7

12.2

13.2

14.2

15.2

16.2

18.2

19.2

19.7

20.2

21.2

23.2

25.7

27.7

28.2

33.2

9.9

7.5

9.5

10.4

10.9

11.9

12.9

13.9

14.9

16.9

17.9

18.4

18.9

19.9

21.9

24.4

26.4

26.9

31.9

8.0

10.0

10.5

11.5

12.5

13.5

14.5

16.5

17.5

18.0

18.5

19.5

21.5

24.0

26.0

26.5

31.5

8.5

9.5

10.5

11.5

12.5

14.5

15.5

16.0

16.5

17.5

19.5

22.0

24.0

24.5

29.5

Note 1 : Embossed tape reel packaging (1,000 pieces/reel).

Order by number of reels.

Note 2 : (**):Specification. Refer to ordering information.

8

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

FH12 Seriesꢀ0.5mm and 1mm Pitch Connectors For FPC/FFC

ꢀ1mm Pitch Type Bottom Contact Type

2.3

A

E

1.0

(0.2)

Mated CrossFsectional Diagram

(2.1)

ꢁPC/ꢁꢁC Contact Surꢀace

(3.1)

(1.3)

B

C

D

4.6

5.6

Note 1 : The coplanarity of each terminal lead within specified dimension is 0.1 mm Max.

Note 2 : Packaged on tape and reel only. Check packaging specification.

Note 3 : Slight variations in color of the plastic compounds do not affect form, fit or function of the connector.

Note 4 : After reflow, the terminal plating may change color, however this does not represent a quality issue.

Unit:mm

Part Number

ꢁH12F5SF1SH(--)

ꢁH12F6SF1SH(--)

ꢁH12F7SF1SH(--)

ꢁH12F8SF1SH(--)

ꢁH12F9SF1SH(--)

ꢁH12F11SF1SH(--)

ꢁH12F12SF1SH(--)

ꢁH12F16SF1SH(--)

ꢁH12F17SF1SH(--)

ꢁH12F22SF1SH(--)

ꢁH12F26SF1SH(--)

CL No.

Number of Contacts

A

4

B

C

D

E

5

6

8.6

9.6

6.07

2.3

2.8

586F0591F6F--

586F0607F4F--

586F0535F5F--

586F0579F0F--

586F0540F5F--

586F0668F9F--

586F0741F7F--

586F0536F8F--

586F0739F5F--

586F0547F4F--

586F0592F9F--

5

9.6

10.6

11.6

12.6

13.6

15.6

16.6

20.6

21.6

26.6

30.6

9.1

7.07

7

6

10.6

11.6

12.6

14.6

15.6

19.6

20.6

25.6

29.6

8.1

8.07

8

7

9.07

9

8

10.07

12.07

13.07

17.07

18.07

23.07

27.07

5.57

11

12

16

17

22

26

4

10

11

15

16

21

25

3

ꢁH12F10(4)SAF1SH(--) 586F0537F0F--

ꢁH12F14(6)SAF1SH(--) 586F0538F3F--

ꢁH12F18(8)SAF1SH(--) 586F0539F6F--

ꢁH12F22(10)SAF1SH(--) 586F0541F8F--

ꢁH12F24(11)SAF1SH(--) 586F0542F0F--

ꢁH12F30(14)SAF1SH(--) 586F0543F3F--

ꢁH12F40(19)SAF1SH(--) 586F0546F1F--

ꢁH12F50(24)SAF1SH(--) 586F0548F7F--

6

5

10.1

12.1

14.1

15.1

18.1

23.1

28.1

11.1

13.1

15.1

16.1

19.1

24.1

29.1

7.57

8

7

9.57

10

11

14

19

24

9

11.57

12.57

15.57

20.57

25.57

10

13

18

23

Note 1: Embossed tape reel packaging (2,000 pieces/reel). Order by number of reels.

Note 2: The 1mm version of FH12 is constructed by loading every other contact into the 0.5mm housing.

When a housing designed for an odd number of 0.5mm pitch contacts is used; the spacing from the edge to the first contact on

either side is the same as the distance between each contact, 1.0mm. Hirose considers this design to be a standard-type 1.0mm

connector.

An eccentric-type connector using a housing designed for an even number of 0.5mm pitch contacts and consequently one side

has 1.5mm distance from the edge to the first contact. (See FPC/FFC dimensional drawing on page 19) The part number for the

eccentric type describes the size of the 0.5mm housing used and lists the number of 1.0mm pitch contacts in parentheses () as

shown in the above table.

9

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

FH12 Seriesꢀ0.5mm and 1mm Pitch Connectors For FPC/FFC

ꢀ1mm Pitch Vertical Mounting Type

Mated CrossFsectional Diagram

ꢁPC/ꢁꢁC Contact Surꢀace

(0.2)

2

(0.15)

0.5 2.5 0.5

2

ꢁ

(4.25)

(1.75)

A

B

1.0

( )

3.8 Metal ꢀitting dimension

C

D

E

Note 1 : The coplanarity of each terminal lead within specified dimension is 0.1 mm Max.

Note 2 : Packaged on tape and reel only. Check packaging specification.

Note 3 : Slight variations in color of the plastic compounds do not affect form, fit or function of the connector.

Note 4 : After reflow, the terminal plating may change color, however this does not represent a quality issue.

Unit:mm

Part Number

CL No.

Number of Contacts

A

B

C

5

D

8

E

F

4

8

6

7

9.9

8.4

9.7

ꢁH12F6SF1SV(--)

ꢁH12F7SF1SV(--)

ꢁH12F8SF1SV(--)

586F0605F9F--

586F0610F9F--

586F0593F1F--

10.9

11.9

19.9

23.9

25.9

27.9

9.4

6

9

10.7

11.7

19.7

23.7

25.7

27.7

8

10.4

18.4

22.4

24.4

26.4

7

10

18

22

24

26

16

20

22

24

15

19

21

23

ꢁH12F16SF1SV(--) 586F0574F7F--

ꢁH12F20SF1SV(--) 586F0634F7F--

ꢁH12F22SF1SV(--) 586F0584F0F--

ꢁH12F24SF1SV(--) 586F0594F4F--

Note 1 : Embossed tape reel packaging (1,000 pieces/reel).

Order by number of reels.

Note 2 : (**):Specification. Refer to ordering information.

10

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

FH12 Seriesꢀ0.5mm and 1mm Pitch Connectors For FPC/FFC

ꢀRecommended FPC/FFC dimensions and Land/Metal Mask dimensions

ꢀ0.5mm Pitch Product

FPC/FFC dimensions

Land / Metal Mask dimensions

B

C

0.1

C

0.5 0.05

0.35 0.03(FPC)

0.3 0.03(FFC)

0.5 0.1

A

B

0.05

0.07

0.3 0.03(Land)

0.5 0.1

0.5 0.05

0.25 0.03(Metal mask)

A

0.05

Product Type

C Dimension

Types other than 0.3 0.05min

Recommended metal mask thickness : 0.15mm

those below

ꢁH12ꢁ

Stiꢀꢀener thickness should be 0.188 mm (7.5 mil) min

0.18 0.05

0.5mm Pitch

Bottom Contact

Type

Unit: mm

Dimension

Number

A

B

Number

A

B

A

B

C

A

B

C

Number

of Contacts

6

8

2.5 3.5

3.5 4.5

4.5 5.5

5.0 6.0

5.5 6.5

6.0 7.0

6.5 7.5

7.0 8.0

7.5 8.5

8.0 9.0

8.5 9.5

9.0 10.0

9.5 10.5

10.5 11.5

11.5 12.5

25

12.0 13.0

12.5 13.5

13.5 14.5

14.0 15.0

14.5 15.5

15.5 16.5

16.0 17.0

16.5 17.5

17.0 18.0

17.5 18.5

19.5 20.5

20.5 21.5

22.0 23.0

24.5 25.5

26.0 27.0

6

8

2.5 8.1 4.5

3.5 9.1 5.5

4.5 10.1 6.5

5.0 10.6 7.0

5.5 11.1 7.5

6.0 11.6 8.0

6.5 12.1 8.5

7.0 12.6 9.0

7.5 13.1 9.5

8.0 13.6 10.0

8.5 14.1 10.5

9.0 14.6 11.0

9.5 15.1 11.5

10.5 16.1 12.5

11.5 17.1 13.5

25

26

28

29

30

32

33

34

35

36

40

42

45

50

53

12.0 17.6 14.0

12.5 18.1 14.5

13.5 19.1 15.5

14.0 19.6 16.0

14.5 20.1 16.5

15.5 21.1 17.5

16.0 21.6 18.0

16.5 22.1 18.5

17.0 22.6 19.0

17.5 23.1 19.5

19.5 25.1 21.5

20.5 26.1 22.5

22.0 27.6 24.0

24.5 30.1 26.5

26.0 31.6 28.0

26

28

29

30

32

33

34

35

36

40

42

45

50

53

10

11

12

13

14

15

16

17

18

19

20

22

24

10

11

12

13

14

15

16

17

18

19

20

22

24

0.5mm Pitch

Top Contact

Type

Even contact number

Odd contact number

No.1 contact

A

0.1

A 0.1

0.8 0.1(Land)

0.65 0.05(Metal mask)

0.5 0.05

0.35 0.03(FPC)

0.3 0.03(FFC)

0.3 0.05

0.5 0.05

0.6 0.1(Land)

1

0.05

1

0.05

0.5 0.05(Metal mask)

1 0.05

0.5 0.1

A

B

0.05

0.07

B

0.05

B 0.05

1

0.05

0.5 0.1

Recommended metal mask thickness : 0.15mm

-Set the stiffener thickness to 0.188 (7.5mil) min.

Unit: mm

0.5mm Pitch

Vertical

Mounting Type

Dimension

Number

A

B

Number

A

B

Number

A

B

Number

of Contacts

A

B

of Contacts

10

of Contacts

04.5 05.5

05.5 06.5

06.0 07.0

07.0 08.0

07.5 08.5

08.0 09.0

08.5 09.5

09.5 10.5

10.5 11.5

11.5 12.5

26

12.5 13.5

14.5 15.5

15.5 16.5

16.0 17.0

16.5 17.5

17.5 18.5

19.5 20.5

22.0 23.0

24.0 25.0

24.5 25.5

29.5 30.5

10

12

13

15

16

17

18

20

22

24

06.5 04.5

07.5 05.5

08.0 06.0

09.0 07.0

09.5 07.5

10.0 08.0

10.5 08.5

11.5 09.5

12.5 10.5

13.5 11.5

26

14.5 12.5

16.5 14.5

17.5 15.5

18.0 16.0

18.5 16.5

19.5 17.5

21.5 19.5

24.0 22.0

26.0 24.0

26.5 24.5

31.5 29.5

12

13

15

16

17

18

20

22

30

32

33

34

36

40

45

49

50

60

30

32

33

34

36

40

45

49

50

60

24

11

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

FH12 Seriesꢀ0.5mm and 1mm Pitch Connectors For FPC/FFC

ꢀRecommended FPC/FFC dimensions and Land/Metal Mask dimensions

ꢀ1mm Pitch Product

FPC/FFC dimensions

Land / Metal Mask dimensions

Recommended metal mask thickness : 0.15mm

πSet the stiffener thickness to 0.188 (7.5mil) min.

Unit: mm

1mm Pitch

Bottom Contact

Type

Dimension

A

B

C

A

B

C

A

B

C

D

A

B

C

D

Number

of Contacts

5

04

05

06

07

08

06

07

08

09

10

12

13

17

18

23

27

1

4

6

8

03 05.5 1.5

05 07.5 1.5

07 09.5 1.5

5

04 10.6 07 1.5

05 11.6 08 1.5

06 12.6 09 1.5

07 13.6 10 1.5

08 14.6 11 1.5

4

6

8

03 10.106.5

05 12.108.5

07 14.110.5

2

6

7

8

9

6

7

8

9

10 09 11.5 1.5

11 10 12.5 1.5

14 13 15.5 1.5

19 18 20.5 1.5

24 23 25.5 1.5

10 09 16.112.5

11 10 17.113.5

14 13 20.116.5

19 18 25.121.5

24 23 30.126.5

11 10

12 11

16 15

17 16

22 21

26 25

11 10 16.6 13 1.5

12 11 17.6 14 1.5

16 15 21.6 18 1.5

17 16 22.6 19 1.5

22 21 27.6 24 1.5

26 25 31.6 28 1.5

1mm Pitch

Vertical

Mounting Type

Recommended metal mask thickness : : 0.15mm

-Set the stiffener thickness to 0.188 (7.5mil) min.

Unit: mm

Dimension

Number

A

B

A

B

of Contacts

6

7

8

16

20

22

24

05

06

07

15

19

21

23

07

08

09

17

21

23

25

6

7

8

16

20

22

24

08

09

10

18

22

24

26

05

06

07

15

19

21

23

12

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

FH12 Seriesꢀ0.5mm and 1mm Pitch Connectors For FPC/FFC

ꢀPackaging Specification

Embossed Carrier Tape Dimensions

(

)

Horizontal Type Common to Bottom/Top Contact, 0.5mm/1mm Pitch

(

)

2.0

Flat surface for placement

with Automatic equipment

Reel Dimensions (Common to All Types)

(D : INSIDE)

End portion

Mounting portion

Lead portion (400mm min.)

Embossed carrier tape

Top cover tape

Blank portion

( E : OUTSIDE)

(10 pockets min.)

ꢀ0.5mm Pitch Bottom/Top Contact Type

Unit:mm

Dimension

Number

A

B

C

D

E

Number

A

B

C

D

E

of Contacts

6

8

16

24

----------

07.5

11.5

17.4

25.4

21.4

29.4

25

24

32

44

----------

28.4

40.4

11.5

14.2

20.2

25.4

33.4

45.4

29.4

37.4

49.4

26

28

29

30

32

33

34

35

36

40

42

45

50

53

10

11

12

13

14

15

16

17

18

19

20

22

24

Note: 2,000 pieces per reel.

ꢀ 1mm Pitch Bottom Contact Type

Unit:mm

E

Dimension

Number

A

B

C

D

E

Number

A

B

C

D

of Contacts

5

6

7

8

9

11

12

16

17

22

26

16

24

32

44

----------

28.4

07.5

11.5

14.2

20.2

17.4

25.4

33.4

45.4

21.4

29.4

37.4

49.4

4

6

8

10

11

14

19

24

16

24

32

44

----------

28.4

07.5

11.5

14.2

20.2

17.4

25.4

33.4

45.4

21.4

29.4

37.4

49.4

40.4

Note: 2,000 pieces per reel.

13

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

FH12 Seriesꢀ0.5mm and 1mm Pitch Connectors For FPC/FFC

Vertical Mounting Type (Common to 0.5mm/1mm Pitch)

Flat surface for placement

with Automatic equipment

(1.75)

ꢀ0.5mm Pitch Vertical mounting Type

Unit:mm

E

Dimension

A

B

C

D

E

A

B

C

D

Number

of Contacts

Number

of Contacts

10

12

13

15

16

17

18

20

22

24

16

24

----------

07.5

11.5

17.4

25.4

21.4

29.4

26

24

32

44

56

----------

28.4

40.4

52.4

11.5

14.2

20.2

26.2

25.4

33.4

45.4

57.4

29.4

37.4

49.4

61.4

30

32

33

34

36

40

45

49

50

Note: 1,000 pieces per reel.

60

Unit:mm

E

ꢀ1mm Pitch Vertical mounting Type

Dimension

A

B

C

D

Number

of Contacts

6

7

24

32

44

----------

28.4

11.5

14.2

20.2

25.4

33.4

45.4

29.4

37.4

49.4

8

16

20

22

24

40.4

Note: 1,000 pieces per reel.

14

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

FH12 Seriesꢀ0.5mm and 1mm Pitch Connectors For FPC/FFC

ꢀFH12 Series FPC/FFC Construction (Recommended Specifications)

1. FFC

FFC : Flexible Flat Cable

Material Name

Material

Thickness (µm)

(12)

(30)

35

Polyester film

Adhesive

(Nickel under plated / Gold plated),

soft copper film

Thermoplastic polyester

Adhesive

Polyester

Adhesive

Stiffener

Polyester type

30

12

Polyester type

Total

30

188 (Note)

295

-Real tolerance of thickness dimension is on the order of 20 µm (275 to 315 µm)

Note: Use of a thicker FFC results in a stiffer lock action and the lock is more easily released.

A factor that contributes to thicker FFC is the use of 250 µm stiffener which is thicker than the standard (188 µm) product. This

results in a total thickness of 357 µm.

When using FFC, control of FFC thickness becomes easy if you indicate to us the thickness of the stiffener.

2. FPC

FPC : Flexible Printed Circuit

Material Name

Covering layer film

Cover adhesive

Material

Thickness (µm)

(25)

Polyimide 1 mil

(25)

Nickel under plated 1to 5µm /

Gold plated 0.2µm

Surꢀace treatmenta

3

Copper foil

Base adhesive

Base film

Cu

1oz

35

25

Heat-hardened adhesive

Polyimide 1 mil

25

Reinforcement material adhesive Heat-hardened adhesive

30

Stiffener

Polyimide 7 mil

Total

175

293

3. Precautions

1. This specification is a recommendation for the construction of the FH12 Series FPC and FFC (t=0.3 0.05).

2. For details about the construction, please contact the FPC/FFC manufacturers.

15

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

FH12 Seriesꢀ0.5mm and 1mm Pitch Connectors For FPC/FFC

ꢀRecommended Temperature Profile

MAX 250ç

HRS test conditions

Solder method

Environment:

Solder composition

:Reꢀlow, IR/hot air

:Room air

:Paste, 96.5%Sn/3%Ag/0.5%Cu

(Senju Metal Industry, Co., Ltd.’s

Part Number: M705F221CM5F32F10.5)

:Glass epoxy 40mm∞80mm∞1.6mm thick

:Top and bottom

contact type 0.3mm∞1.3mm

Vertical mounting type 0.6mm

:Top and bottom contact type

250

200

150

100

50

230ç

200ç

Test board

Land dimensions

150ç

∞1.5mm

(ç)

Metal mask

0.25mm

Vertical mounting type

0.5mm 1.5mm 0.15mm thick

∞1.3mm∞0.15mm thick

∞

This temperature proꢀile is based on the above conditions.

In individual applications the actual temperature may vary,

depending on solder paste type, volume/thickness and board

size/thickness. Consult your solder paste and equipment

manuꢀacturer ꢀor speciꢀic recommendations.

25ç

(60 seconds) 90 to 120 seconds

30 seconds

0

60

120

Start

Preheating

Time

Soldering

16

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

FH12 Seriesꢀ0.5mm and 1mm Pitch Connectors For FPC/FFC

ꢀConnector Operating Instructions, precautions and recommendations

ꢀBottom Contact Type (common for 0.5mm/1mm Pitch)

Operation

Precautions

1) Avoid grasping the actuator with two fingers or lift-

ing the actuator with fingernail.

1. FPC/FFC Termination procedure.

Connector installed on the board.

1) Lift up the actuator. Use thumb or index finger.

2) Do not use a thin tool such as the tip of a screw-

driver to release the lock lever. Doing so will cause

deformation of the contacts.

3) Do not apply force in the direction of arrows A, B, or C

while the lock lever is open.

Doing so will cause the lock lever to become disen gaged,

or will damage the hook portion of the connector body.

2) Fully insert the FPC/FFC parallel to mounting sur-

face, with the exposed conductive traces facing

down.

4) When inserting the FPC/FFC, do not forcefully rub against

the surface beneath the connector insertion slot.

Doing so will result in the FPC/FFC forcefully striking the

contacts and this will cause contact deformation, peeling

of the FPC/FFC conductors, and other irregularities.

FPC/FFC conductive traces

5) Insert the FPC/FFC at the proper position of the connector

insertion slot, and insert perpendicularly with respect to the con-

nector. Improper insertion will cause continuity problems, disen-

gagement of the lock lever, and damage to the hook portion.

17

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

FH12 Seriesꢀ0.5mm and 1mm Pitch Connectors For FPC/FFC

ꢀBottom Contact Type (common for 0.5mm/1mm Pitch)

Operation

Precautions

3) Rotate down the actuator until firmly closed.

It is critical that the inserted FPC/FFC is not moved

and remains fully inserted. Should the FPC/FFC be

moved, open the actuator and repeat the process,

starting with Step 1.

6) Partial insertion of the FPC/FFC, offset insertion, and

diagonal insertion will result in an unfavorable engage-

ment of the lock lever in which the lock lever is raised.

To correct this, first remove the FPC/FFC and then

reinsert it. Forcing the lock will damage the connector.

Stiffener

7) When locking, handle the FPC/FFC so that a load

is not applied to the FPC/FFC as would occur by

pulling the FPC/FFC, or lifting it, etc.

When a load is applied in the opposite direction to

the rotational movement of the lock, an excessive

load will be applied and this will cause connector

damage.

2. FPC/FFC Removal

1) Lift up the actuator.

2) Carefully remove the FPC/FFC.

8) At the time of lock operation, application of force

such as that indicated by the arrows in the dia-

grams below will cause the lock lever to disengage.

When the lock lever has become disengaged,

please exchange the entire connector.

18

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

FH12 Seriesꢀ0.5mm and 1mm Pitch Connectors For FPC/FFC

ꢀTop Contact Type

Operation

Precautions

1) Avoid further lifting of the lock lever once the lock has been

released. Doing so will cause the lock lever to separate

from the rotational shaft, and the lock lever will become dis-

engaged or the hook portion of the connector body will be

damaged.

1. FPC/FFC Termination procedure.

Connector installed on the board.

1) Lift up the actuator. Use thumb or index finger.

Lock lever

Rotational shaꢀt

2) Fully insert the FPC/FFC parallel to mounting sur-

face, with the exposed conductive traces facing

UP.

2) Avoid further pressing of the lock portion from the

locked condition when the FPC/FFC has not yet

been inserted. Doing so will cause the lock lever to

become disengaged from the rotational shaft, and

the hook portion of the connector body will be

damaged.

FPC/FFC conductive traces

Stiffener

3) Rotate down the actuator until firmly closed.

It is critical that the inserted FPC/FFC is not moved

and remains fully inserted. Should the FPC/FFC be

moved, open the actuator and repeat the process,

starting with Step 1 above.

3) Do not insert the FPC/FFC diagonally. Doing so will

result in the corners of the FPC/FFC catching on the

contacts and will cause deformation of the contacts.

2. FPC/FFC Removal

1) Lift up the actuator.

2) Carefully remove the FPC/FFC.

4) When closing down the actuator apply equal pres-

sure to both sides of the actuator.

19

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

FH12 Seriesꢀ0.5mm and 1mm Pitch Connectors For FPC/FFC

ꢀVertical Mounting Type (common for 0.5mm/1mm Pitch)

Operation

Precautions

1) Avoid forcing the actuator up or down without the

FPC/FFC inserted.

1. FPC/FFC Termination procedure.

Connector installed on the board.

1) Verify that the actuator is positioned upright. If the

actuator has rotated to the side, carefully rotate it

upright.

Actuator upright

2) Insert the FPC/FFC vertically in the connector slot

assuring that the conductive traces of the

FPC/FFC are facing away from the actuator.

2) Do not insert the FPC/FFC diagonally.

Doing so will result in the corners of the FPC/FFC

catching on the contacts and will cause deforma-

tion of the contacts.

FPC/FFC conductive traces

Stiffener

3) Press down the actuator in the direction shown.

2. FPC/FFC Removal

Rotate the actuator upward and withdraw the FPC/FFC.

®

5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN

PHONE: 81-3-3491-5300, FAX: 81-3-3495-5230

http://www.hirose.com

http://www.hirose-connectors.com

The contents of this catalog are current as of date of 09/2010. Contents are subject to change without notice for the purpose of improvements.

20


型号：	FH12-30(55)SA-1SH(55)
厂家：	HRS
描述：	Card Edge Connector, 14 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal,
文件：	总20页 (文件大小：447K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

FH12-30(55)SA-1SH(55) [HRS]

相关型号：

FH12-30S-0.5SH

FH12-30S-0.5SH(05)

FH12-30S-0.5SH(1)(98)

FH12-30S-0.5SH(54)

FH12-30S-0.5SH(55)

FH12-30S-0.5SH55

FH12-30S-0.5SV

FH12-30S-0.5SV(1)(98)

FH12-30S-0.5SV(54)

FH12-30S-0.5SV(55)

FH12-30S-0.5SVA(54)

FH12-30S-0.5SVA(55)