FH19C-21S-0.5SH(10) [HRS]
Card Edge Connector, 21 Contact(s), 1 Row(s), Female, Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator, HALOGEN FREE;型号: | FH19C-21S-0.5SH(10) |
厂家: | HRS |
描述: | Card Edge Connector, 21 Contact(s), 1 Row(s), Female, Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator, HALOGEN FREE PC 连接器 |
文件: | 总12页 (文件大小:338K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
0.5 mm Pitch, 0.9 mm Height, FPC/FFC Connectors
FH19C Series/FH19SC Series
FH19C – FPC/FFC thickness: 0.2 0.03mm
Actuator color: Brown
FH19SC – FPC/FFC thickness: 0.3 0.03mm
Actuator color: Black
●
0.9mm high (30 pos. shown)
■Features
1. Low-profile 0.5mm pitch FPC/FFC Connectors
Miniaturization of portable equipment and personal
mobile devices has created increased demand for a low
profile, high density, and high reliability connectors.
*The design of this connector has been made thinner and
smaller, with a height of 0.9mm and width of 3mm.
*PCB footprint: Reduced approximately 48% (as compared
with Hirose Electric's 0.5mm pitch FH12 Series
connectors)
0.9mm
● Can be mounted over conductive traces
*Connector weight: Reduced approximately 78% (as compared
with Hirose Electric's 0.5mm pitch FH12 Series connectors)
2. Conductive traces on the PCB can run under
the connector
All bottom surface of the connector is solid, without any
exposure of the contact.
3. Proven Flip-Lock Actuator System assures
easy and reliable operation
Enclosed construction
(No exposed contacts)
Metal fittings
Rotating actuator permits easy insertion and reliable
connection with the FPC & FFC.
(Leadless)
Tactile sensation confirms complete mechanical locking of
the actuator and the electrical connection.
● Metal Fittings (Leadless Type)
4. Accepts 0.2mm & 0.3mm thick FPC/FFC
No exposed contacts on the bottom of the connector.
The connector will also terminate with 0.2mm thick Flat
Flexible Cable (FFC).
No protrusions on
the sides allows
close side-by-side
board placement.
5. Board placement with automatic equipment
Flat upper surface and tape and reel packaging facilitate
vacuum pick-up and placement. Standard reel packaging
contains 5000 connectors.
● Actuator Temporary Hold Mechanism
6. Wide range of contact counts
The contact positions available range from 4 to 50.
7. Satisfies Halogen-free requirements
All materials and substances used in this product comply
with the Halogen-free standards.
* Defined according to IEC61249-2-21
Br: 900ppm max, Cl: 900ppm max, Br+Cl: 1,500ppm max
Actuator stays open during insertion of the FPC/FFC.
1
2013.11w
FH19C & FH19SC Series●0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
■Product Specifications
Operating temperature range
Storage temperature range
(
)
Note1
Current rating 0.5 A
+
+
-55ç to 85ç (Note 2)
-10ç to 50ç (Note 3)
Rating
Operating humidity range
Relative humidity 90% max. (No condensation)
Storage humidity range
Relative humidity 90% max. (No condensation)
Voltage rating 50 V AC
Thickness: = 0.2 0.03mm Gold plated
Thickness: = 0.3 0.03mm Gold plated
Recommended
FPC, FFC
FH19C Series
FH19SC Series
Item
Specification
Conditions
1. Insulation resistance 500 M ohms min.
100 V DC
2. Withstanding voltage No flashover or insulation breakdown
150 V AC/1 minute
100 m ohms max.
*Including FPC/FFC conductor resistance
3. Contact resistance
1 mA
4. Durability
Contact resistance: 100 m ohms max.
20 cycles
(insertion/ withdrawal) No damage, cracks, or parts dislocation.
No electrical discontinuity of 1 μs or more.
Contact resistance: 100 m ohms max.
No damage, cracks, or parts dislocation.
Frequency: 10 to 55 Hz, single amplitude of
0.75mm, 10 cycles in each of the 3 directions
5. Vibration
6. Shock
No electrical discontinuity of 1 μs. min.
Contact resistance: 100 m ohms max.
No damage, cracks, or parts dislocation.
Acceleration of 981 m/s2, 6 ms duration, sine half-
wave waveform, 3 cycles in each of the 3 axis.
Contact resistance: 100 m ohms max.
Insulation resistance: 100 M ohms min.
No damage, cracks, or parts dislocation.
96 hours at temperature of 40ç and humidity of
90 to 95%
7. Humidity
(Steady state)
+
+
+
+
+ +
15ç to 35ç
2 to 3(Minutes)
Temperature: -55ç
15ç to 35ç
85ç
30
Contact resistance: 100 m ohms max.
Insulation resistance: 100 M ohms min.
No damage, cracks, or parts dislocation.
/
/
/
/
/
/
Time
: -30
2 to 3
8. Temperature cycle
5 cycles
9. Resistance to
soldering heat
Reflow: At the recommended temperature profile
Manual soldering: 350ç 5ç for 5 seconds
No deformation of components affecting performance.
Note 1: When passing the current through all of the contacts, use 70% of the current rating.
Note 2: Includes temperature rise caused by current flow.
Note 3: The term “storage” refers to products stored for long period of time prior to mounting and use. Operating Temperature
Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during
transportation.Information
■Materials
Part
Material
LCP
Finish
Remarks
UL94V-0
Color: Beige
Color: Brown (FH19C Series)
Color: Black (FH19SC Series)
Gold plated
Insulator
Contacts
Metal fittings
Phosphor bronze
Phosphor bronze
-------
-------
Pure tin reflow plated
■Ordering information
FH 19 C - 30S - 0.5 SH (05)
1
2
3
4
5
6
7
1 Series name :
2 Series No. :
FH
19
5 Contact pitch : 0.5mm
Terminal type
6
SH: SMT horizontal mounting type
C
:
FPC thickness : 0.2mm
FPC/FFC thickness : 0.3mm
3
SC :
Material and plating specifications :
7
FH19C : (10)...Gold plating with nickel barrier 5,000pieces/reel
(99)...Gold plating with nickel barrier 500pieces/reel
4 No. of contacts : 4 to 50
FH19SC : (09)...Gold plating with nickel barrier 5,000pieces/reel
(99)...Gold plating with nickel barrier 500pieces/reel
2
FH19C & FH19SC Series●0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
■Connector Dimension
[
FH19C Series]
A
0.15
B
G
∞Number of contacts
0.15
0.5
(0.15)
G
A
(130°)
Polarizing mark indicator
Number of contacts indicator
(0.15)
(C: FPC insertion slot dimension)
0.1
2
0.15MAX
2.15 0.2
1
1
2
0.15MAX
S
D
(1.3)
Notes
1
2
3
4
5
6
The coplanarity of each terminal lead and metal fitting is within 0.1mm.
The contact terminal lead position indicates the dimension from the bottom surface of the insulator body.
Difference between terminal contact to be max. 0.1mm.
Packaged on tape and reel only. Check packaging specification.
Any discoloration of the plastic compound will NOT AFFECT form, fit or function of the connector.
After reflow, the terminal plating may change color, however this does not represent a quality issue.
Unit: mm
D
Part Number
CL No.
Number of Contacts
A
4
B
1.5
2
C
FH19C-04S-0.5SH(**)
FH19C-05S-0.5SH(**)
FH19C-06S-0.5SH(**)
FH19C-07S-0.5SH(**)
FH19C-08S-0.5SH(**)
FH19C-09S-0.5SH(**)
FH19C-10S-0.5SH(**)
FH19C-12S-0.5SH(**)
FH19C-13S-0.5SH(**)
FH19C-15S-0.5SH(**)
FH19C-17S-0.5SH(**)
FH19C-20S-0.5SH(**)
FH19C-21S-0.5SH(**)
FH19C-24S-0.5SH(**)
FH19C-27S-0.5SH(**)
FH19C-30S-0.5SH(**)
FH19C-34S-0.5SH(**)
FH19C-40S-0.5SH(**)
FH19C-50S-0.5SH(**)
580-0410-1-**
580-0418-3-**
580-0409-2-**
580-0411-4-**
580-0404-9-**
580-0403-6-**
580-0412-7-**
580-0413-0-**
580-0405-1-**
580-0406-4-**
580-0408-0-**
580-0402-3-**
580-0414-2-**
580-0407-7-**
580-0401-0-**
580-0400-8-**
580-0419-6-**
580-0416-8-**
580-0417-0-**
4
2.57
3.35
5
4.5
5
3.07
3.57
3.85
6
2.5
3
4.35
7
5.5
6
4.07
4.85
8
3.5
4
4.57
5.35
9
6.5
7
5.07
5.85
10
12
13
15
17
20
21
24
27
30
34
40
50
4.5
5.5
6
5.57
6.35
8
6.57
7.35
8.5
9.5
10.5
12
12.5
14
15.5
17
19
22
27
7.07
7.85
7
8.07
8.85
8
9.07
9.85
9.5
10
10.57
11.07
12.57
14.07
15.57
17.57
20.57
25.57
11.35
11.85
13.35
14.85
16.35
18.35
21.35
26.35
11.5
13
14.5
16.5
19.5
24.5
Note1: Embossed tape reel packaging (5,000 pieces/reel, 500 pieces/reel).
Order by number of reels.
3
FH19C & FH19SC Series●0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
[
FH19SC Series]
A
0.15
B
G
∞Number of contacts
0.5
(0.15)
0.15
G
A
5
(130°)
Polarizing mark indicator
Number of contacts indicator
(0.15)
(C: FPC insertion slot dimension)
0.1
2
1
0.15MAX
2.15 0.2
0.15MAX
S
1
2
D
(1.3)
Notes
1
2
3
4
5
6
7
The coplanarity of each terminal lead and metal fitting is within 0.1mm.
The contact terminal lead position indicates the dimension from the bottom surface of the insulator body.
Difference between terminal contact to be max. 0.1mm.
Any discoloration of the plastic compound will NOT AFFECT form, fit or function of the connector.
The contacts are protruding. 0.03mm max. from the housing top surface.
Packaged on tape and reel only. Check packaging specification.
After reflow, the terminal plating may change color, however this does not represent a quality issue.
Unit: mm
D
Part Number
CL No.
Number of Contacts
A
8
B
5.5
6
C
FH19SC-12S-0.5SH(**)
FH19SC-13S-0.5SH(**)
FH19SC-14S-0.5SH(**)
FH19SC-15S-0.5SH(**)
FH19SC-16S-0.5SH(**)
FH19SC-17S-0.5SH(**)
FH19SC-18S-0.5SH(**)
FH19SC-20S-0.5SH(**)
FH19SC-21S-0.5SH(**)
FH19SC-22S-0.5SH(**)
FH19SC-24S-0.5SH(**)
FH19SC-26S-0.5SH(**)
FH19SC-27S-0.5SH(**)
FH19SC-28S-0.5SH(**)
FH19SC-30S-0.5SH(**)
FH19SC-32S-0.5SH(**)
580-0512-1-**
580-0518-8-**
580-0509-7-**
580-0503-0-**
580-0521-2-**
580-0504-3-**
580-0519-0-**
580-0502-8-**
580-0505-6-**
580-0506-9-**
580-0511-9-**
580-0510-6-**
580-0516-2-**
580-0513-4-**
580-0500-2-**
580-0514-7-**
12
13
14
15
16
17
18
20
21
22
24
26
27
28
30
32
6.57
7.35
8.5
9
7.07
7.57
7.85
6.5
7
8.35
9.5
10
8.07
8.85
7.5
8
8.57
9.35
10.5
11
9.07
9.85
8.5
9.5
10
9.57
10.35
11.35
11.85
12.35
13.35
14.35
14.85
15.35
16.35
17.35
12
10.57
11.07
11.57
12.57
13.57
14.07
14.57
15.57
16.57
12.5
13
10.5
11.5
12.5
13
14
15
15.5
16
13.5
14.5
15.5
17
18
Note1: Embossed tape reel packaging (5,000 pieces/reel, 500pieces/reel) .
Order by number of reels.
4
FH19C & FH19SC Series●0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
■Recommended PCB Land and Metal Mask Dimensions
[Common to FH19C & FH19SC Series]
Recommended metal mask thickness: 0.10 mm.
B
H
∞Number of contacts
0.5
0.3 0.05 (Land)
0.1 H
0.25 0.05 (Metal mask)
(0.05)
J
0.1
0.1
(0.2)
K
(A)
■Recommended FPC, FFC Dimensions
[
Common to FH19C & FH19SC Series]
L
0.05
0.03
0.5 0.07
B
FH19C Series
0.2 0.03
FH19SC Series
0.3 0.03
0.35 0.03(FPC)
0.3 0.03(FFC)
0.5 0.03
Note 1: Stiffener dimension should be 3.5mm min., and X dimension should be 0.5mm for improved flexibility of FPC.
Unit: mm
Unit: mm
Number of Contacts
A
B
J
K
L
Number of Contacts
A
B
J
K
L
4
5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
8.0
8.5
9.0
9.5
10.0
10.5
11.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.5
6.0
6.5
7.0
7.5
8.0
8.5
3.1
3.6
4.1
4.6
5.1
5.6
6.1
7.1
7.6
8.1
8.6
9.1
9.6
10.1
3.9
4.4
4.9
5.4
5.9
6.4
6.9
7.9
8.4
8.9
9.4
9.9
10.4
10.9
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.5
7.0
7.5
8.0
8.5
9.0
9.5
20
21
22
24
26
27
28
30
32
34
40
45
50
12.0
12.5
13.0
14.0
15.0
15.5
16.0
17.0
18.0
19.0
22.0
24.5
27.0
9.5
11.1
11.6
12.1
13.1
14.1
14.6
15.1
16.1
17.1
18.1
21.1
23.6
26.1
11.9
12.4
12.9
13.9
14.9
15.4
15.9
16.9
17.9
18.9
21.9
24.4
26.9
10.5
11.0
11.5
12.5
13.5
14.0
14.5
15.5
16.5
17.5
20.5
23.0
25.5
10.0
10.5
11.5
12.5
13.0
13.5
14.5
15.5
16.5
19.5
22.0
24.5
6
7
8
9
10
12
13
14
15
16
17
18
5
FH19C & FH19SC Series●0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
■
FH19C & FH19SC Series FPC/FFC Construction (Recommended Specifications)
FPC : Flexible Printed Circuit
1. Using Single-sided FPC
Thickness (μm)
FH19C FH19SC
Material Name
Material
Covering layer film
Cover adhesive
Polyimide 1 mil thick
(25)
(25)
(25)
(25)
Nickel under plated 1 to 5μm /
Gold plated 0.2μm
Surface treatment
3
3
Copper foil
Base adhesive
Base film
Cu
Thermosetting adhesive
Polyimide 1 mil thick
1oz
35
25
25
30
35
25
25
30
Reinforcement material adhesive Thermosetting adhesive
Polyimide
FH19C :3mil
FH19SC:7mil
75
175
Stiffener
Total
193
293
FPC : Flexible Printed Circuit
2. Using Double-sided FPC
Thickness (μm)
FH19C FH19SC
Material Name
Material
Polyimide 1 mil thick
(25)
(25)
Covering layer film
Cover adhesive
(25)
(25)
Nickel under plated 1 to 5μm /
Gold plated 0.2μm
Surface treatment
3
3
Through-hole copper
Copper foil
Cu
15
18
18
25
18
18
25
25
25
15
18
18
25
18
18
25
25
50
Cu
1/2oz
Base adhesive
Base film
Thermosetting adhesive
Polyimide
Cu
1 mil thick
Base adhesive
Copper foil
1/2oz
Cover adhesive
Covering layer film
Reinforcement material adhesive
Thermosetting adhesive
Polyimide 1 mil thick
Thermosetting adhesive
Polyimide
FH19C :1mil
FH19SC:4mil
25
100
Stiffener
Total
197
297
FFC : Flexible Flat Cable
3. Using FFC (Flexible Flat Cable)
Thickness (μm)
Material Name
Material
FH19C FH19SC
(12)
(30)
35
(12)
(30)
35
Polyester film
Adhesive
Polyester thermoplastic type
(Nickel under plated / Gold plated), soft copper film
30
30
Adhesive
Polyester
Adhesive
Stiffener
Polyester
12
12
30
30
Polyester
Polyester
Total
100
207
188
295
* Practical tolerance of thickness dimension is 20μm (i.e., 187 to 227μm).
1. This specification is a recommendation for the construction of the
FH19C/FH19SC Series FPC and FFC (t=0.2/0.3 0.03).
2. For details about the construction, please contact the FPC/FFC
manufacturers.
4. Precautions
6
FH19C & FH19SC Series●0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
■Packaging Specifications
[Common to FH19C & FH19SC Series]
● Embossed Carrier Tape Dimensions
(1.7)
2
0.15
4
0.1
8
0.1
(0.3)
(3.3)
(4.3)
Flat surface for placement
with automatic equipment
Unreeling direction
(1)
●Reel Dimensions
(R:INSIDE)
(T:OUTSIDE)
End cection
Mounting cection
Lead cection (400 mm min.)
Embossed carrier tape
Blank cection
Blank cection
Top cover tape
(10 pockets min.)
(10 pockets min.)
Unit: mm
Unit: mm
Number of Contacts
M
N
Q
R
T
Number of Contacts
M
N
Q
R
T
4
5
6
7
8
16
16
16
16
16
16
16
16
16
16
16
24
24
24
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
11.5
11.5
11.5
4.3
4.8
5.3
5.8
6.3
6.8
7.3
8.3
8.8
9.3
9.8
10.3
10.8
11.3
17.4
17.4
17.4
17.4
17.4
17.4
17.4
17.4
17.4
17.4
17.4
25.4
25.4
25.4
21.4
21.4
21.4
21.4
21.4
21.4
21.4
21.4
21.4
21.4
21.4
29.4
29.4
29.4
20
21
22
24
26
27
28
30
32
34
40
45
50
24
24
24
24
24
24
24
24
32
32
44
44
44
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
14.2
14.2
20.2
20.2
20.2
12.3
12.8
13.3
14.3
15.3
15.8
16.3
17.3
18.3
19.3
22.3
24.8
27.3
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
33.4
33.4
45.4
45.4
45.4
29.4
29.4
29.4
29.4
29.4
29.4
29.4
29.4
37.4
37.4
49.4
49.4
49.4
9
10
12
13
14
15
16
17
18
Note: Embossed tape 32 mm or wider will have perforated feed holes on two sides.
7
FH19C & FH19SC Series●0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
■Recommended Temperature Profile
[For FH19C & FH19SC Series]
MAX 250ç
HRS test condition
Solder method
Solder composition :Paste,
96.5%Sn/3.0%Ag/0.5%Cu
:Reflow, IR/hot air
250
200
150
100
50
230ç
200ç
(Senju Metal Industry, Co.,
Ltd.’s Part
Number:M705-221CM5-32-
10.5)
150ç
Test board
:Glass epoxy
45mm∞100mm∞1.6mm thick
Land dimensions
Metal mask
:0.3mm∞0.8mm
:0.25mm∞0.8mm∞0.1mm
This temperature profile is based on the above
conditions.
25ç
(60 sec.) 90 sec. to 120 sec.
(60 sec.)
0
In individual applications the actual temperature may
vary, depending on solder paste type,
volume/thickness and board size/thickness. Consult
tour solder paste and equipment manufacturer for
specific recommendations.
Start
Preheating
Soldering
Time (Seconds)
8
FH19C & FH19SC Series●0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
■Connector Operation and Precautions
Operation
Precautions
1) Do not apply excessive force or use any type
of tool to operate the actuator.
1. FPC/FFC Termination procedure.
Connector installed on the board.
1) Lift up the actuator. Use thumb or index fin-
ger.
2) The connector will assure reliable performance
when the actuator is open to 130° maximum.
Do not exceed this angle, as this may cause
permanent damage to the connector.
2) Assure that the FPC/FFC is fully inserted
parallel to mounting surface, with the
exposed conductive traces facing down.
FPC conductor surface
(Bottom side)
3) Insert the FPC/FFC straight into the insertion open-
ing. Failing to follow this precaution can lead to
damaging the FPC/FFC and altering its connectivity.
3) Rotate down the actuator until firmly closed.
It is critical that the inserted FPC/FFC is not
moved and remains fully inserted. Should
the FPC/FFC be moved, open the actuator
and repeat the process, starting with Step 1
above.
4) When you insert the FPC into the insertion open-
ing, do not apply excessive pressure or scrape
the FPC on the bottom of the opening. Doing so
can lead to deformities of the contacts and can
hinder the performance of the connector.
2. FPC/FFC Removal
1) Lift up the actuator.
2) Carefully remove the FPC/FFC.
5) Application of excessive force to the inserted
FPC/FFC may cause damage to connector
and may affect the reliability of electrical con-
nection.
If specific applica-
tion requires con-
tinuous or repeated
pull or bend of the
inserted FPC/FFC,
assure that the
forces are NOT
transmitted directly
to the connector.
9
FH19C & FH19SC Series●0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
:
NOTES
10
FH19C & FH19SC Series●0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
:
NOTES
11
FH19C & FH19SC Series●0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
USA:
USA:
USA:
HIROSE ELECTRIC (U.S.A.), INC. Headquarters
HIROSE ELECTRIC (U.S.A.), INC. North California Office HIROSE ELECTRIC (U.S.A.), INC. Detroit Office (Automotive)
2688 Westhills Court, Simi Valley, CA 93065-6235 20400 Stevens Creek Blvd., Ste 250, Cupertino, CA 37677 Professional Center Drive, Suite #100C
Phone : 1-805-522-7958
Fax : 1-805-522-3217
http://www.hiroseusa.com
95014
Livonia, MI 48154
Phone : 1-408-253-9640
Fax : 1-408-253-9641
http://www.hiroseusa.com
Phone : 1-734-542-9963
Fax : 1-734-542-9964
http://www.hiroseusa.com
GERMANY:
THE NETHERLANDS:
UK:
HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH
Herzog-Carl-Strasse 4 D-73760 Ostfildern
(Scharnhauser Park)
Phone : 49-711-4560-02-1
Fax : 49-711-4560-02-299
http://www.hirose.de
HIROSE ELECTRIC EUROPE B.V.
Hogehillweg #8 1101 CC Amsterdam Z-O
Phone : 31-20-6557460
Fax : 31-20-6557469
http://www.hiroseeurope.com
HIROSE ELECTRIC EUROPE B.V. UK BRANCH
First Floor, St Andrews House, Caldecotte Lake
Business Park, Milton Keynes MK7 8LE
Phone : 44-1908-369060
Fax : 44-1908-369078
http://www.hirose.co.uk
CHINA:
CHINA:
CHINA:
HIROSE ELECTRIC CO., LTD. BEIJING REPRESENTATIVE OFFICE HIROSE ELECTRIC (SHANGHAI) CO., LTD.
HIROSE ELECTRIC CO., LTD. SHENZHEN OFFICE
A1001, Ocean International Center, Building 56# East 4th 1501-02, Cross Tower Building, 318 Fuzhou Road, Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre
Ring Middle Road, Chao Yang District, Beijing, 100025
Phone : 86-10-5165-9332
Huang Pu District, Shanghai 200001
Phone : 86-21-6391-3355
5002, ShenNanDong Road, ShenZhen City, Guangdong Province, 518008
Phone : 86-755-8207-0851
Fax : 86-10-5908-1381
Fax : 86-21-6335-0767
Fax : 86-755-8207-0873
http://www.hirose-china.com.cn
http://www.hirose-china.com.cn
http://www.hirose-china.com.cn
HONG KONG:
TAIWAN:
SINGAPORE:
HIROSE ELECTRIC HONGKONG TRADING CO., LTD.
Unit 1102 A&B, Energy Plaza, 92 Granville Road, 103 8F, No.87, Zhengzhou Rd., Taipei
Tsim Sha Tsui East, Kowloon
Phone : 852-2803-5338
Fax : 852-2591-6560
HIROSE ELECTRIC TAIWAN CO., LTD.
HIROSE ELECTRIC CO., LTD.
10 Anson Road #26-16 International Plaza 079903
Phone : 65-6324-6113
65-6324-6123
Fax :
http://www.hirose-singapore.com.sg
Phone : 886-2-2555-7377
Fax : 886-2-2555-7350
http://www.hirose-taiwan.com.tw
http://www.hirose-hongkong.com.hk
KOREA:
HIROSE KOREA CO., LTD.
1261-10, Jeoungwhang-Dong, Shihung-City,
Kyunggi-Do 429-450
Phone : 82-31-496-7000,7124
Fax : 82-31-496-7100
http://www.hirose.co.kr
®
6-3,Nakagawa Chuoh-2-Chome,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
TEL: 81-45-620-3526 Fax: 81-45-591-3726
http://www.hirose.com
+
+
http://www.hirose-connectors.com
The contents of this catalog are current as of date of 11/2013. Contents are subject to change without notice for the purpose of improvements.
12
相关型号:
FH19C-21S-0.5SH(51)
Card Edge Connector, 21 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal
HRS
FH19C-21S-0.5SH05
0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
HRS
FH19C-24S-0.5SH(51)
Card Edge Connector, 24 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal
HRS
FH19C-24S-0.5SH(99)
Card Edge Connector, 24 Contact(s), 1 Row(s), Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator
HRS
FH19C-24S-0.5SH05
0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
HRS
FH19C-27S-0.5SH05
0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
HRS
FH19C-30S-0.5SH(51)
Card Edge Connector, 30 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal
HRS
FH19C-30S-0.5SH05
0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
HRS
©2020 ICPDF网 联系我们和版权申明