FH19SC-06S-0.5SH(05) [HRS]
Card Edge Connector, 6 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal, ROHS COMPLIANT;型号: | FH19SC-06S-0.5SH(05) |
厂家: | HRS |
描述: | Card Edge Connector, 6 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal, ROHS COMPLIANT |
文件: | 总9页 (文件大小:203K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
0.5mm pitch, 0.9mm above the board,
Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
FH19C & FH19SC Series
Actuator color: Brown
FH19SC – FPC/FFC thickness: 0.3 0.03mm
Actuator color: Black
ꢀFeatures
ꢀꢀ0.9mm high
1. Low-profile 0.5mm pitch FPC/FFC Connectors
Miniaturization of portable equipment and personal mobile
devices has created increased demand for a low profile,
high density, and high reliability connectors.
0.9mm
*The design of this connector has been made thinner and
smaller, with a height of 0.9mm and width of 3mm.
*PCB footprint: Reduced approximately 48% (as compared with
Hirose Electric's 0.5mm pitch FH12 Series connectors)
*Connector weight: Reduced approximately 78% (as compared
with Hirose Electric's 0.5mm pitch FH12 Series connectors)
ꢀꢀCan be mounted over conductive traces
2. Conductive traces on the PCB can run under
the connector
All bottom surface of the connector is solid, without any
exposure of the contact.
3. Proven Flip-Lock Actuator System assures
easy and reliable operation
Rotating actuator permits easy insertion and reliable
Enclosed construction
connection with the FPC & FFC.
Tactile sensation confirms complete mechanical locking of
the actuator and the electrical connection.
(No exposed contacts)
Metal fittings
(Leadless)
4. Accepts 0.2mm & 0.3mm thick FPC/FFC
No exposed contacts on the bottom of the connector.
The connector will also terminate with 0.2mm thick Flat
Flexible Cable (FFC).
ꢀꢀMetal Fittings (Leadless Type)
No protrusions on the sides
allows close side-by-side
board placement.
5. Board placement with automatic equipment
Flat upper surface and tape and reel packaging facilitate
vacuum pick-up and placement. Standard reel packaging
contains 5000 connectors.
ꢀꢀActuator Temporary Hold Mechanism
6. Halogen-free * (FH19C,FH19SC(11 to 50pos.))
*As defined by IEC61249-2-21
Br-900ppm maximum, Cl-900ppm maximum,
Actuator stays open during insertion of the FPC/FFC.
2010.9
1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH19C & FH19SC Seriesꢀ0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
ꢀProduct Specifications
Operating temperature range
Storage temperature range
(
)
Note1
Current rating 0.5 A
+
+
-55ç to 85ç (Note 2)
-10ç to 50ç (Note 3)
Rating
Operating humidity range
Relative humidity 90% max. (No condensation)
Storage humidity range
Relative humidity 90% max. (No condensation)
Voltage rating 50 V AC
Thickness: = 0.2 0.03mm Gold plated
Thickness: = 0.3 0.03mm Gold plated
Recommended
FPC, FFC
FH19C Series
FH19SC Series
Item
Specification
Conditions
1. Insulation resistance 500 M ohms min.
100 V DC
2. Withstanding voltage No flashover or insulation breakdown
150 V AC/1 minute
100 m ohms max.
*Including FPC/FFC conductor resistance
3. Contact resistance
1 mA
4. Durability
Contact resistance: 100 m ohms max.
20 cycles
(insertion/ withdrawal) No damage, cracks, or parts dislocation.
No electrical discontinuity of 1 µs or more.
Contact resistance: 100 m ohms max.
No damage, cracks, or parts dislocation.
Frequency: 10 to 55 Hz, single amplitude of
0.75mm, 10 cycles in each of the 3 directions
5. Vibration
6. Shock
No electrical discontinuity of 1 µs. min.
Contact resistance: 100 m ohms max.
No damage, cracks, or parts dislocation.
Acceleration of 981 m/s2, 6 ms duration, sine half-
wave waveform, 3 cycles in each of the 3 axis.
Contact resistance: 100 m ohms max.
Insulation resistance: 100 M ohms min.
No damage, cracks, or parts dislocation.
96 hours at temperature of 40ç and humidity of
90 to 95%
7. Humidity
(Steady state)
+
+
+
+
+ +
15ç to 35ç
2 to 3(Minutes)
Temperature: -55ç
15ç to 35ç
85ç
30
Contact resistance: 100 m ohms max.
Insulation resistance: 100 M ohms min.
No damage, cracks, or parts dislocation.
/
/
/
/
/
/
Time
: -30
2 to 3
8. Temperature cycle
5 cycles
9. Resistance to
soldering heat
Reflow: At the recommended temperature profile
Manual soldering: 350ç 5ç for 5 seconds
No deformation of components affecting performance.
Note 1: When passing the current through all of the contacts, use 70% of the current rating.
Note 2: Includes temperature rise caused by current flow.
Note 3: The term “storage” refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation.Information
Note 4: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a
specific part number shown.
ꢀMaterials
Part
Material
LCP
Finish
Remarks
UL94V-0
Insulator
Color: Beige
Color: Brown (FH19C Series)
Color: Black (FH19SC Series)
Gold plated
Actuator
PPS/LCP
Contacts
Metal fittings
Phosphor bronze
Phosphor bronze
-------
-------
Pure tin reflow plated
ꢀOrdering information
FH 19 C - 30S - 0.5 SH (05)
1
2
3
4
5
6
7
1 Series name :
2 Series No. :
FH
19
5 Contact pitch : 0.5mm
Terminal type
6
SH: SMT horizontal mounting type
C
:
FPC/FFC thickness : 0.2mm
FPC/FFC thickness : 0.3mm
3
SC :
Material and plating specifications :
7
Actuator material
PPS
------
LCP Halogen Free
4 No. of contacts : 4 to 50
Contact: Gold plated
FH19C
(05)
YES
(10)
Contact: Gold plating with nickel barrier ------
FH19SC
4 to 10 pos.
FH19SC
Contact: Gold plated
Contact: Gold plating with nickel barrier (06)
Contact: Gold plated ------
Contact: Gold plating with nickel barrier ------
(05)
------
NO
------
(05)
YES
(09)
11 to 50 pos.
2
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH19C & FH19SC Seriesꢀ0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
ꢀConnector Dimension
[
FH19C Series]
A
0.15
B
G
∞Number of contacts
0.15
0.5
(0.15)
G
A
(130°)
Polarizing mark indicator
Number of contacts indicator
(0.15)
(C: FPC insertion slot dimension)
0.1
2
0.15MAX
2.15 0.2
1
1
2
0.15MAX
S
D
(1.3)
Notes
1
2
3
4
5
6
The coplanarity of each terminal lead and metal fitting is within 0.1
The contact terminal lead position indicates the dimension from the bottom surface of the insulator body.
Difference between terminal contact to be max. 0.1mm.
Packaged on tape and reel only. Check packaging specification.
Any discoloration of the plastic compound will NOT AFFECT form, fit or function of the connector.
After reflow, the terminal plating may change color, however this does not represent a quality issue.
Unit: mm
CL No.
Number of Contacts
A
4
B
1.5
2
C
D
Part Number
580-0410-1-**
580-0418-3-**
580-0409-2-**
580-0411-4-**
580-0404-9-**
580-0403-6-**
580-0412-7-**
580-0413-0-**
580-0405-1-**
580-0406-4-**
580-0408-0-**
580-0402-3-**
580-0414-2-**
580-0407-7-**
580-0401-0-**
580-0400-8-**
580-0419-6-**
580-0416-8-**
580-0417-0-**
4
2.57
3.35
3.85
FH19C-04S-0.5SH(**)
FH19C-05S-0.5SH(**)
FH19C-06S-0.5SH(**)
FH19C-07S-0.5SH(**)
FH19C-08S-0.5SH(**)
FH19C-09S-0.5SH(**)
FH19C-10S-0.5SH(**)
FH19C-12S-0.5SH(**)
FH19C-13S-0.5SH(**)
FH19C-15S-0.5SH(**)
FH19C-17S-0.5SH(**)
FH19C-20S-0.5SH(**)
FH19C-21S-0.5SH(**)
FH19C-24S-0.5SH(**)
FH19C-27S-0.5SH(**)
FH19C-30S-0.5SH(**)
FH19C-34S-0.5SH(**)
FH19C-40S-0.5SH(**)
FH19C-50S-0.5SH(**)
5
4.5
5
3.07
2.5
3
3.57
4.35
6
5.5
6
4.07
4.85
7
3.5
4
4.57
5.35
8
6.5
7
5.07
5.85
9
4.5
5.5
6
5.57
6.35
10
12
13
15
17
20
21
24
27
30
34
40
50
8
6.57
7.35
8.5
9.5
10.5
12
12.5
14
15.5
17
19
22
27
7.07
7.85
7
8.07
8.85
8
9.07
9.85
9.5
10
10.57
11.07
12.57
14.07
15.57
17.57
20.57
25.57
11.35
11.85
13.35
14.85
16.35
18.35
21.35
26.35
11.5
13
14.5
16.5
19.5
24.5
Note1: Embossed tape reel packaging (5,000 pieces/reel).
Order by number of reels.
Note2: **Specification. Refer to ordering information.
3
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH19C & FH19SC Seriesꢀ0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
[
FH19SC Series]
A
0.15
B
G
∞Number of contacts
0.5
(0.15)
0.15
G
A
5
(130°)
Polarizing mark indicator
Number of contacts indicator
(0.15)
(C: FPC insertion slot dimension)
0.1
2
1
0.15MAX
2.15 0.2
0.15MAX
S
1
2
D
(1.3)
Notes
1
2
3
4
5
6
7
The coplanarity of each terminal lead and metal fitting is within 0.1
The contact terminal lead position indicates the dimension from the bottom surface of the insulator body.
Difference between terminal contact to be max. 0.1mm.
Any discoloration of the plastic compound will NOT AFFECT form, fit or function of the connector.
The contacts are protruding. 0.03mm max. from the housing top surface.
Packaged on tape and reel only. Check packaging specification.
After reflow, the terminal plating may change color, however this does not represent a quality issue.
Unit: mm
D
Part Number
CL No.
Number of Contacts
A
4
B
1.5
2
C
FH19SC-04S-0.5SH(**)
FH19SC-05S-0.5SH(**)
FH19SC-06S-0.5SH(**)
FH19SC-08S-0.5SH(**)
FH19SC-09S-0.5SH(**)
FH19SC-10S-0.5SH(**)
FH19SC-12S-0.5SH(**)
FH19SC-13S-0.5SH(**)
FH19SC-14S-0.5SH(**)
FH19SC-15S-0.5SH(**)
FH19SC-16S-0.5SH(**)
FH19SC-17S-0.5SH(**)
FH19SC-18S-0.5SH(**)
FH19SC-20S-0.5SH(**)
FH19SC-21S-0.5SH(**)
FH19SC-22S-0.5SH(**)
FH19SC-24S-0.5SH(**)
FH19SC-26S-0.5SH(**)
FH19SC-27S-0.5SH(**)
FH19SC-28S-0.5SH(**)
FH19SC-30S-0.5SH(**)
FH19SC-32S-0.5SH(**)
FH19SC-40S-0.5SH(**)
FH19SC-45S-0.5SH(**)
FH19SC-50S-0.5SH(**)
580-0517-5-**
580-0515-0-**
580-0501-5-**
580-0520-0-**
580-0507-1-**
580-0508-4-**
580-0512-1-**
580-0518-8-**
580-0509-7-**
580-0503-0-**
580-0521-2-**
580-0504-3-**
580-0519-0-**
580-0502-8-**
580-0505-6-**
580-0506-9-**
580-0511-9-**
580-0510-6-**
580-0516-2-**
580-0513-4-**
580-0500-2-**
580-0514-7-**
580-0522-5-**
580-0523-8-**
580-0524-0-**
4
2.57
3.35
5
4.5
5
3.07
3.85
6
2.5
3.5
4
3.57
4.35
8
6
4.57
5.35
9
6.5
7
5.07
5.85
10
12
13
14
15
16
17
18
20
21
22
24
26
27
28
30
32
40
45
50
4.5
5.5
6
5.57
6.35
8
6.57
7.35
8.5
9
7.07
7.85
6.5
7
7.57
8.35
9.5
10
10.5
11
12
12.5
13
14
15
15.5
16
17
18
22
24.5
27
8.07
8.85
7.5
8
8.57
9.35
9.07
9.85
8.5
9.5
10
9.57
10.35
11.35
11.85
12.35
13.35
14.35
14.85
15.35
16.35
17.35
21.35
23.85
26.35
10.57
11.07
11.57
12.57
13.57
14.07
14.57
15.57
16.57
20.57
23.07
25.57
10.5
11.5
12.5
13
13.5
14.5
15.5
19.5
22
24.5
Note1: Embossed tape reel packaging (5,000 pieces/reel) .
Order by number of reels.
Note2: **Specification. Refer to ordering information.
4
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH19C & FH19SC Seriesꢀ0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
ꢀRecommended PCB Land and Metal Mask Dimensions
[Common to FH19C & FH19SC Series]
Recommended metal mask thickness: 0.10 mm.
B
∞Number of contacts
H
0.5
0.3 0.05 (Land)
0.1 H
0.25 0.05 (Metal mask)
(0.05)
J
0.1
0.1
(0.2)
K
(A)
ꢀRecommended FPC, FFC Dimensions
[
Common to FH19C & FH19SC Series]
L
0.05
0.03
0.5 0.07
B
FH19C Series
0.2 0.03
FH19SC Series
0.3 0.03
0.35 0.03(FPC)
0.3 0.03(FFC)
0.5 0.03
Note 1: Stiffener dimension should be 3.5mm min., and X dimension should be 0.5mm for improved flexibility of FPC.
Unit: mm
Unit: mm
Number of Contacts
A
B
J
K
L
Number of Contacts
A
B
J
K
L
4
5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
8.0
8.5
9.0
9.5
10.0
10.5
11.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.5
6.0
6.5
7.0
7.5
8.0
8.5
3.1
3.6
4.1
4.6
5.1
5.6
6.1
7.1
7.6
8.1
8.6
9.1
9.6
10.1
3.9
4.4
4.9
5.4
5.9
6.4
6.9
7.9
8.4
8.9
9.4
9.9
10.4
10.9
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.5
7.0
7.5
8.0
8.5
9.0
9.5
20
21
22
24
26
27
28
30
32
34
40
45
50
12.0
12.5
13.0
14.0
15.0
15.5
16.0
17.0
18.0
19.0
22.0
24.5
27.0
9.5
11.1
11.6
12.1
13.1
14.1
14.6
15.1
16.1
17.1
18.1
21.1
23.6
26.1
11.9
12.4
12.9
13.9
14.9
15.4
15.9
16.9
17.9
18.9
21.9
24.4
26.9
10.5
11.0
11.5
12.5
13.5
14.0
14.5
15.5
16.5
17.5
20.5
23.0
25.5
10.0
10.5
11.5
12.5
13.0
13.5
14.5
15.5
16.5
19.5
22.0
24.5
6
7
8
9
10
12
13
14
15
16
17
18
5
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH19C & FH19SC Seriesꢀ0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
ꢀFH19C & FH19SC Series FPC/FFC Construction (Recommended Specifications)
FPC : Flexible Printed Circuit
1. Using Single-sided FPC
Thickness (µm)
FH19C FH19SC
Material Name
Covering layer film
Material
1 mil thick
Polyimide
(25)
(25)
(25)
(25)
Cover adhesive
Nickel under plated 1 to 5µm /
Gold plated 0.2µm
Surface treatment
3
3
Copper foil
Base adhesive
Base film
Cu
Thermosetting adhesive
Polyimide 1 mil thick
1oz
35
25
25
30
35
25
25
30
Reinforcement material adhesive Thermosetting adhesive
Polyimide
FH19C :3mil
FH19SC:7mil
75
175
Stiffener
Total
193
293
FPC : Flexible Printed Circuit
2. Using Double-sided FPC
Thickness (µm)
FH19C FH19SC
Material Name
Material
1 mil thick
(25)
(25)
Covering layer film
Polyimide
Cover adhesive
(25)
(25)
Nickel under plated 1 to 5µm /
Gold plated 0.2µm
Surface treatment
3
3
Through-hole copper
Copper foil
Cu
15
18
18
25
18
18
25
25
25
15
18
18
25
18
18
25
25
50
Cu
1/2oz
Base adhesive
Thermosetting adhesive
Base film
Polyimide
Cu
1 mil thick
Base adhesive
Copper foil
1/2oz
Cover adhesive
Covering layer film
Reinforcement material adhesive
Thermosetting adhesive
Polyimide 1 mil thick
Thermosetting adhesive
Polyimide
FH19C :1mil
FH19SC:4mil
25
100
Stiffener
Total
197
297
FFC : Flexible Flat Cable
3. Using FFC (Flexible Flat Cable)
Thickness (µm)
Material Name
Material
FH19C FH19SC
(12)
(30)
35
(12)
(30)
35
Polyester film
Adhesive
Polyester thermoplastic type
Polyester
(Nickel under plated / Gold plated), soft copper film
30
30
Adhesive
Polyester
Adhesive
Stiffener
12
12
30
30
Polyester
Polyester
Total
100
207
188
295
* Practical tolerance of thickness dimension is 20µm (i.e.ꢀ 187 to 227µm).
1. This specification is a recommendation for the construction of the FH19C/
Series FPC and FFC (t=0.2 0.03).
4. Precautions
2. For details about the constructionꢀ please contact the FPC/FFC manufacturers.
6
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH19C & FH19SC Seriesꢀ0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
ꢀPackaging Specifications
[Common to FH19C & FH19SC Series]
ꢀ Embossed Carrier Tape Dimensions
(1.7)
2
0.15
4
0.1
8
0.1
(0.3)
(3.3)
(4.3)
Flat surface for placement
with automatic equipment
Unreeling direction
(1)
ꢀReel Dimensions
(R:INSIDE)
(T:OUTSIDE)
End cection
Mounting cection
Lead cection (400 mm min.)
Embossed carrier tape
Blank cection
Blank cection
Top cover tape
(10 pockets min.)
(10 pockets min.)
Unit: mm
Unit: mm
Number of Contacts
M
N
Q
R
T
Number of Contacts
M
N
Q
R
T
4
5
6
7
8
16
16
16
16
16
16
16
16
16
16
16
24
24
24
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
11.5
11.5
11.5
4.3
4.8
5.3
5.8
6.3
6.8
7.3
8.3
8.8
9.3
9.8
10.3
10.8
11.3
17.4
17.4
17.4
17.4
17.4
17.4
17.4
17.4
17.4
17.4
17.4
25.4
25.4
25.4
21.4
21.4
21.4
21.4
21.4
21.4
21.4
21.4
21.4
21.4
21.4
29.4
29.4
29.4
20
21
22
24
26
27
28
30
32
34
40
45
50
24
24
24
24
24
24
24
24
32
32
44
44
44
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
14.2
14.2
20.2
20.2
20.2
12.3
12.8
13.3
14.3
15.3
15.8
16.3
17.3
18.3
19.3
22.3
24.8
27.3
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
33.4
33.4
45.4
45.4
45.4
29.4
29.4
29.4
29.4
29.4
29.4
29.4
29.4
37.4
37.4
49.4
49.4
49.4
9
10
12
13
14
15
16
17
18
Note: 5,000 pieces per reel.
Embossed tape 32 mm or wider will have perforated feed holes on two sides.
7
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH19C & FH19SC Seriesꢀ0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
ꢀRecommended Temperature Profile
[For FH19C & FH19SC Series]
MAX 250ç
HRS test condition
Solder method
:Reflowꢀ IR/hot air
250
200
150
100
50
Solder composition
:Pasteꢀ 96.5%Sn/3.0%Ag/0.5%Cu
(Senju Metal Industryꢀ Co.ꢀ Ltd.’s Part
Number:M705-221CM5-32-10.5)
230ç
200ç
Test board
:Glass epoxy 45mm∞100mm∞1.6mm thick
Land dimensions
Metal mask
:0.3mm∞0.8mm
150ç
:0.25mm∞0.8mm∞0.1mm
This temperature profile is based on the above conditions.
In individual applications the actual temperature may varyꢀ
depending on solder paste typeꢀ volume/thickness and board
size/thickness. Consult tour solder paste and equipment
manufacturer for specific recommendations.
25ç
(60 sec.) 90 sec. to 120 sec.
(60 sec.)
0
Start
Preheating
Soldering
Time (Seconds)
8
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH19C & FH19SC Seriesꢀ0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
ꢀOperation and Precations
Operation
Precautions
1) Do not apply excessive force or use any type of
tool to operate the actuator.
1. FPC/FFC Termination procedure.
Connector installed on the board.
1) Lift up the actuator. Use thumb or index finger.
2) Assure that the FPC/FFC is fully inserted parallel
to mounting surface, with the exposed conductive
traces facing down.
2) The connector will assure reliable performance
when the actuator is open to 130° maximum.
Do not exceed this angleꢀ as this may cause
permanent damage to the connector.
FPC conductor surface
(Bottom side)
3) Rotate down the actuator until firmly closed.
It is critical that the inserted FPC/FFC is not moved
and remains fully inserted. Should the FPC/FFC be
moved, open the actuator and repeat the process,
starting with Step 1 above.
3) Application of excessive force to the inserted
FPC/FFC may cause damage to connector and
may affect the reliability of electrical connection.
If specific application
requires continuous or
repeated pull or bend of
the inserted FPC/FFC,
assure that the forces are
NOT transmitted directly
to the connector.
2. FPC/FFC Removal
1) Lift up the actuator.
2) Carefully remove the FPC/FFC.
9
相关型号:
FH19SC-06S-0.5SH05
0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
HRS
FH19SC-08S-0.5SH(06)
Card Edge Connector, 8 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal
HRS
FH19SC-08S-0.5SH05
0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
HRS
FH19SC-09S-0.5SH(05)
Card Edge Connector, 9 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal, ROHS COMPLIANT
HRS
FH19SC-09S-0.5SH05
0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
HRS
FH19SC-10S-0.5SH(51)
Card Edge Connector, 10 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal
HRS
FH19SC-10S-0.5SH05
0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
HRS
FH19SC-12S-0.5SH(05)
Card Edge Connector, 12 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal, HALOGEN FREE
HRS
FH19SC-12S-0.5SH(09)
Card Edge Connector, 12 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal, HALOGEN FREE
HRS
FH19SC-12S-0.5SH(51)
Card Edge Connector, 12 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal
HRS
FH19SC-12S-0.5SH(99)
Card Edge Connector, 12 Contact(s), 1 Row(s), Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Locking, Black Insulator
HRS
©2020 ICPDF网 联系我们和版权申明