FH23-17S-0.3SHAW(51) [HRS]
Card Edge Connector, 17 Contact(s), 1 Row(s), Female, Right Angle, 0.012 inch Pitch, Surface Mount Terminal, Locking;
| 型号： | FH23-17S-0.3SHAW(51) |
| 厂家： | 
HRS |
| 描述： | Card Edge Connector, 17 Contact(s), 1 Row(s), Female, Right Angle, 0.012 inch Pitch, Surface Mount Terminal, Locking PC 连接器 |
| 文件： | 总10页 (文件大小：398K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
0.3mm Contact Pitch, 1.25mm above the board, Flexible Printed Circuit Connectors
FH 23 Series
Staggered termination configuration. Only 1.25 mm above the board.
ꢀ
Leadless type
Completely enclosed
bottom surface
Lead type
1.25mm
ꢀFeatures
1. FPC low insertion force and high holding force
Hirose Electric's unique low insertion force (LIF) design
(patents pending) improves the Flexible Printed Circuit
(FPC) holding force after insertion.
FPC insertion force:Reduced approximately 36%
(as compared with FH18 Series connectors).
FPC holding force:Improvement of approximately 22%
(as compared with FH18 Series connectors).
2. Temporary hold of FPC
There is no need to hold the FPC after insertion in the
connector. The connector will hold it in correct position,
allowing closing of the actuator.
When the actuator is opened
3. Easy board mounting
The surface mounted termination of the contacts is staggered on
0.6 mm centers, positioned on front and back of the connector.
Bottom of the connector is completely insulated, allowing
conductive traces on PCB to run under the connector.
4. Proven Flip-lock Actuator assures easy and
reliable operation
Rotating actuator permits easy insertion and reliable connection
with the FPC. Tactile sensation confirms complete mechanical
locking of the actuator and the electrical connection.
5. Variations to suit different mounting areas
Available with lead and leadless type of terminations
(for opposing FPC insertion side).
Temporary hold of FPC
6. Designed for placement with automatic equipment
Flat top surface allows pick-up with vacuum nozzles.
Packaged in embossed tape, on reel. One reel contains 2,500 pieces.
7. Accepts 0.2mm thick FPC
8. Variety of contact positions
Available with 15,17,21,23,25,27,31,33,39,45,51,61and 71 pos.
8. Environmental considerations
Plating is lead-free in order to protect environment.
ꢀApplications
Mobile phones, PDA’s, digital cameras, digital video
cameras and other compact devices requiring
interconnections of the main circuit with the LCD,
When the actuator is closed
plasma display (PDP), camera module, or other devices.
42
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ꢀProduct Specifications
Operating temperature range
-55 ç to +85ç (Note 1)
Operating humidity range
Storage temperature range
-10ç to +50ç (Note 2)
Storage humidity range
Relative humidity 90% max.
Current rating 0.3 A DC
Ratings
Voltage rating 30 V AC
Relative humidity 90% max. (No condensation)
Recommended FPC
Item
Thickness: = 0.2 0.03mm Tin-lead plated (Note 3)
Specification Conditions
1. Insulation resistance 50 M ohms min.
2. Withstanding voltage No flashover or insulation breakdown
100 m ohms max.
100 V DC
90 V AC/one minute
3. Contact resistance
1 mA AC
10 cycles
*Including FPC/FFC conductor resistance
4. Durability
Contact resistance: 100 m ohms max.
4. (insertion/ withdrawal) No damage, cracks, or parts dislocation.
No electrical discontinuity of 1 s or more.
Contact resistance: 100 m ohms max.
No damage, cracks, or parts dislocation.
µ
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 10 cycles,
3 axis.
5. Vibration
6. Shock
No electrical discontinuity of 1 s. min.
Contact resistance: 100 m ohms max.
No damage, cracks, or parts dislocation.
µ
Acceleration of 981 m/s2, 6ms duration, sine half-wave
waveform, 3 cycles, 3 axis.
Contact resistance: 100 m ohms max.
Insulation resistance: 50 M ohms min.
No damage, cracks, or parts dislocation.
7. Humidity
96 hours at temperature of 40°C and humidity of 90% to 95%
(Steady state)
Contact resistance: 100 m ohms max.
Temperature:-55ç
/
+15ç to +35ç/+85ç/+15ç to +35ç
8. Temperature cycle Insulation resistance: 50 M ohms min.
No damage, cracks, or parts looseness.
Time: 30
5 cycles
/
2 to 3
/
30 2 to 3 (Minutes)
/
No deformation of
components affecting performance.
9. Resistance to
soldering heat
Reflow: At the recommended temperature profile
Manual soldering: 350 ç 5 ç for 5 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term ”storage” refers to products stored for long period of time prior to mounting and use. Operating
Temperature Range and Humidity range covers non- conducting condition of installed connectors in storage,
shipment or during transportation.
Note 3: When FPC is gold plated, the connector contacts should be also gold plated: Select the (05) specification.
ꢀMaterials
Part
Material
LCP
Finish
Remarks
UL94V-0
---------------
Color:Beige
Color:Black
Insulator
Contacts
LCP
Phosphor bronze
Tin-lead plated (Note 3)
ꢀOrdering information
FH23 - 39S - 0.3 SHW (05)
1
2
3
4
5
1 Series name : FH23
2 No. of contacts.
4 Terminal type
SHW: SMT horizontal mounting type, lead type termination.
SHAW: SMT horizontal mounting type, lead-less type termination.
Number of contacts : 15,17,21,23,25,27,31,33,39,45,51,61,71
3 Contact pitch: 0.3 mm
Plating specifications :
5
(05)
(51)
: Gold plated
: Tin-lead plated
43
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
BConnector Dimensions (Lead Type termination)
A
0.3
B
1.7
0.6
(0.15)
Number of contacts indicator
C
0.6
(0.12)
0.05MAX.
0.1MAX.
0.05MAX.
0.1MAX.
E
(D: FPC insertion area dimensions)
0.55
4.15
0.5
1
2
1
2
Notes
The coplanarity of each terminal lead is within 0.1.
1
2
3
The contact terminal lead position indicates the dimension from the E surface, the bottom surface of the insulator body.
Any discoloration of the plastic compound will NOT AFFECT form, fit or function of the connector.
Lead Type
Unit: mm
Part Number
CL No.
Number of Contacts
A
B
C
D
FH23-15S-0.3SHW(51)
FH23-17S-0.3SHW(51)
FH23-21S-0.3SHW(51)
FH23-23S-0.3SHW(51)
FH23-25S-0.3SHW(51)
FH23-27S-0.3SHW(51)
FH23-31S-0.3SHW(51)
FH23-33S-0.3SHW(51)
FH23-39S-0.3SHW(51)
FH23-45S-0.3SHW(51)
FH23-51S-0.3SHW(51)
FH23-61S-0.3SHW(51)
FH23-71S-0.3SHW(51)
586-1317-0-51
586-1300-7-51
586-1314-1-51
586-1324-5-51
586-1322-0-51
586-1308-9-51
586-1302-2-51
586-1304-8-51
586-1306-3-51
586-1318-2-51
586-1312-6-51
586-1310-0-51
586-1320-4-51
15
17
21
23
25
27
31
33
39
45
51
61
71
17.0
17.6
18.8
19.4
10.0
10.6
11.8
12.4
14.2
16.0
17.8
20.8
23.8
13.6
14.2
15.4
16.0
16.6
17.2
18.4
19.0
10.8
12.6
14.4
17.4
20.4
14.2
14.8
16.0
16.6
17.2
17.8
19.0
19.6
11.4
13.2
15.0
18.0
21.0
14.83
15.43
16.63
17.23
17.83
18.43
19.63
10.23
12.03
13.83
15.63
18.63
21.63
Note: Embossed tape reel packaging(2,500 pieces/reel)
Order by number of reels.
44
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ꢀConnector Dimensions Diagram (Leadless Type termination)
A
0.3
B
1.7
0.6
(0.15)
* *
Number of contacts indicator
C
0.6
(0.12)
0.05MAX.
0.1MAX.
0.05MAX.
E
0.1MAX.
(D: FPC insertion area dimensions)
0.55
4.15
1
2
1
2
Notes
The coplanarity of each terminal lead is within 0.1.
1
2
3
The contact terminal lead position indicates the dimension from the E surface, the bottom surface of the insulator body.
Any discoloration of the plastic compound will NOT AFFECT form, fit or function of the connector.
Leadless Type
Unit: mm
Part Number
CL No.
Number of Contacts
A
B
C
D
FH23-15S-0.3SHAW(51)
FH23-17S-0.3SHAW(51)
FH23-21S-0.3SHAW(51)
FH23-23S-0.3SHAW(51)
FH23-25S-0.3SHAW(51)
FH23-27S-0.3SHAW(51)
FH23-31S-0.3SHAW(51)
FH23-33S-0.3SHAW(51)
FH23-39S-0.3SHAW(51)
FH23-45S-0.3SHAW(51)
FH23-51S-0.3SHAW(51)
FH23-61S-0.3SHAW(51)
FH23-71S-0.3SHAW(51)
586-1316-7-51
586-1301-0-51
586-1315-4-51
586-1325-8-51
586-1323-2-51
586-1309-1-51
586-1303-5-51
586-1305-0-51
586-1307-6-51
586-1319-5-51
586-1313-9-51
586-1311-3-51
586-1321-7-51
15
17
21
23
25
27
31
33
39
45
51
61
71
17.0
17.6
18.8
19.4
10.0
10.6
11.8
12.4
14.2
16.0
17.8
20.8
23.8
13.6
14.2
15.4
16.0
16.6
17.2
18.4
19.0
10.8
12.6
14.4
17.4
20.4
14.2
14.8
16.0
16.6
17.2
17.8
19.0
19.6
11.4
13.2
15.0
18.0
21.0
14.83
15.43
16.63
17.23
17.83
18.43
19.63
10.23
12.03
13.83
15.63
18.63
21.63
Note: Embossed tape reel packaging(2,500 pieces/reel)
Order by number of reels.
45
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
BRecommended PCB Land and Metal Mask Dimensions (Lead Type)
B
0.05
(Land)
0.3 0.05
0.6 0.05
0.25 0.05 (Metal masꢀ)
0.3 0.05
Recommended metal masꢀ thicꢀness: t = 0.1 mm
0.6 0.05
0.3 0.05 (Land)
0.25 0.05 (Metal masꢀ)
C
0.05
Lead Type
Unit: mm
Part Number
CL No.
Number of Contacts
B
C
G
Part Number
CL No.
Number of Contacts
B
C
G
FH23-15S-0.3SHW(51) 586-1317-0-51
FH23-17S-0.3SHW(51) 586-1300-7-51
FH23-21S-0.3SHW(51) 586-1314-1-51
FH23-23S-0.3SHW(51) 586-1324-5-51
FH23-25S-0.3SHW(51) 586-1322-0-51
FH23-27S-0.3SHW(51) 586-1308-9-51
FH23-31S-0.3SHW(51) 586-1302-2-51
15
17
21
23
25
27
31
03.6 04.2 04.8
04.2 04.8 05.4
05.4 06.0 06.6
06.0 06.6 07.2
06.6 07.2 07.8
07.2 07.8 08.4
08.4 09.0 09.6
FH23-33S-0.3SHW(51) 586-1304-8-51
FH23-39S-0.3SHW(51) 586-1306-3-51
FH23-45S-0.3SHW(51) 586-1318-2-51
FH23-51S-0.3SHW(51) 586-1312-6-51
FH23-61S-0.3SHW(51) 586-1310-0-51
FH23-71S-0.3SHW(51) 586-1320-4-51
33
39
45
51
61
71
09.0 09.6 10.2
10.8 11.4 12.0
12.6 13.2 13.8
14.4 15.0 15.6
17.4 18.0 18.6
20.4 21.0 21.6
BRecommended Land and Metal Mask Dimensions (Leadless Type)
B
0.05
0.3 0.05(Land)
0.6 0.05
0.25 0.05(Metal masꢀ)
0.3 0.05
Recommended metal masꢀ thicꢀness: t = 0.1 mm
0.3 0.05
(Land)
0.6 0.05
0.25 0.05(Metal masꢀ)
C
0.05
Leadless Type
Unit: mm
Part Number
CL No.
Number of Contacts
B
C
G
Part Number
CL No.
Number of Contacts
B
C
G
FH23-15S-0.3SHAW(51) 586-1316-7-51
FH23-17S-0.3SHAW(51) 586-1301-0-51
FH23-21S-0.3SHAW(51) 586-1315-4-51
FH23-23S-0.3SHAW(51) 586-1325-8-51
FH23-25S-0.3SHAW(51) 586-1323-2-51
FH23-27S-0.3SHAW(51) 586-1309-1-51
FH23-31S-0.3SHAW(51) 586-1303-5-51
15
17
21
23
25
27
31
03.6 04.2 04.8
04.2 04.8 05.4
05.4 06.0 06.6
06.0 06.6 07.2
06.6 07.2 07.8
07.2 07.8 08.4
08.4 09.0 09.6
FH23-33S-0.3SHAW(51) 586-1305-0-51
FH23-39S-0.3SHAW(51) 586-1307-6-51
FH23-45S-0.3SHAW(51) 586-1319-5-51
FH23-51S-0.3SHAW(51) 586-1313-9-51
FH23-61S-0.3SHAW(51) 586-1311-3-51
FH23-71S-0.3SHAW(51) 586-1321-7-51
33
39
09.0 09.6 10.2
10.8 11.4 12.0
12.6 13.2 13.8
14.4 15.0 15.6
17.4 18.0 18.6
20.4 21.0 21.6
45
51
61
71
46
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
BRecommended FPC Dimensions
G
C
0.05
0.03
0.07
0.3 0.07
0.3
0.4 +0.04
4
0.02
0.6
-0.03
0.3 +0.04
( 0.2 )
( 0.1 )
-0.03
(0.07)
0.2 0.03
(0.2)
(0.05)
(0.1 between conductors)
(0.2 conductor width)
0.6 0.07
0.6 0.02
0.3 0.02
B
0.03
+0.04
4
5
0.3
also permitted when drawing plated leads.
- 0.03
Polyamide and thermally hardening adhesive is recommended as the materials for the stiffener.
BPackaging Specification
Embossed Carrier Tape Dimensions(Tape width of 24 mm max.)
ꢀ
2
0.15
4
0.1
12 0.1
(1.7)
(0.3)
Flat surface for placement
with Automatic equipment
(0.85)(0.5) (5.1)
(2.45)
Unreeling direction
Unit: mm
Part Number CL No. Number of Contacts
H
K
L
M
N
Q
Part Number CL No. Number of Contacts
H
K
L
M
N
Q
FH23-15S-0.3SHW(51) 586-1317-0-51
FH23-15S-0.3SHAW(51) 586-1316-7-51
FH23-17S-0.3SHW(51) 586-1300-7-51
FH23-17S-0.3SHAW(51) 586-1301-0-51
FH23-21S-0.3SHW(51) 586-1314-1-51
FH23-21S-0.3SHAW(51) 586-1315-4-51
FH23-23S-0.3SHW(51) 586-1324-5-51
FH23-23S-0.3SHAW(51) 586-1325-8-51
FH23-25S-0.3SHW(51) 586-1322-0-51
FH23-25S-0.3SHAW(51) 586-1323-2-51
FH23-27S-0.3SHW(51) 586-1308-9-51
FH23-27S-0.3SHAW(51) 586-1309-1-51
15
15
17
17
21
21
23
23
25
25
27
27
16 07.5 07.3 05.1 04.5 16.5
16 07.5 07.3 05.1 04.5 16.5
16 07.5 07.9 05.7 05.1 16.5
16 07.5 07.9 05.7 05.1 16.5
16 07.5 09.1 06.9 06.3 16.5
16 07.5 09.1 06.9 06.3 16.5
24 11.5 09.7 07.5 06.9 24.5
24 11.5 09.7 07.5 06.9 24.5
24 11.5 10.3 08.1 07.5 24.5
24 11.5 10.3 08.1 07.5 24.5
24 11.5 10.9 08.7 08.1 24.5
24 11.5 10.9 08.7 08.1 24.5
FH23-31S-0.3SHW(51) 586-1302-2-51
FH23-31S-0.3SHAW(51) 586-1303-5-51
FH23-33S-0.3SHW(51) 586-1304-8-51
FH23-33S-0.3SHAW(51) 586-1305-0-51
FH23-39S-0.3SHW(51) 586-1306-3-51
FH23-39S-0.3SHAW(51) 586-1307-6-51
FH23-45S-0.3SHW(51) 586-1318-2-51
FH23-45S-0.3SHAW(51) 586-1319-5-51
FH23-51S-0.3SHW(51) 586-1312-6-51
FH23-51S-0.3SHAW(51) 586-1313-9-51
31
31
33
33
39
39
45
45
51
51
24 11.5 12.1 09.9 09.3 24.5
24 11.5 12.1 09.9 09.3 24.5
24 11.5 12.7 10.5 09.9 24.5
24 11.5 12.7 10.5 09.9 24.5
24 11.5 14.5 12.3 11.7 24.5
24 11.5 14.5 12.3 11.7 24.5
24 11.5 16.3 14.1 13.5 24.5
24 11.5 16.3 14.1 13.5 24.5
24 11.5 18.1 15.9 15.3 24.5
24 11.5 18.1 15.9 15.3 24.5
47
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Embossed Carrier Tape Dimensions(Tape width of 32 mm min.)
ꢀ
2
0.15
4
0.1
12 0.1
(1.7)
(0.3)
1.5+0.1
0
Flat surface for placement
with Automatic equipment
(0.85)
(5.1)
(0.5)
Unreeling direction
(2.45)
Unit: mm
Q
Part Number
CL No.
Number of Contacts
61
H
J
K
L
M
N
FH23-61S-0.3SHW(51)
FH23-61S-0.3SHAW(51)
FH23-71S-0.3SHW(51)
FH23-71S-0.3SHAW(51)
586-1310-0-51
586-1311-3-51
586-1320-4-51
586-1321-7-51
32
28.4
14.2
21.1
18.9
18.3
32.5
44.5
71
44
40.4
20.2
24.1
21.9
21.3
Reel Dimensions
ꢀ
(2)(Q)
End portion
Mounting portion
Lead portion (400 mm min.)
Embossed carrier tape
Top cover tape
Blanꢀ portion
Blanꢀ portion
(10 pocꢀets min.)
(10 pocꢀets min.)
48
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
BRecommended Temperature Profile
Using Typical Solder Paste
ꢀ
5 sec. Max.
240ç
HRS test conditions
Solder method
250
200
150
100
50
:Reflow, IR/hot air
(Nihon Den-netsu Co., Ltd.’s
Part Number: SENSBY NR-2)
:Room air
:Paste, 63%Sn/37%Pb
(Senju Metal Industry, Co., Ltd.’s
Part Number: OZ63-201C-50-9)
:Glass epoxy 45mm∞100mm∞1.6mm thicꢀ
:Lead type 0.3mm∞1.25mm,
0.3mm∞0.7mm
Leadless type 0.3mm∞1.25mm,
0.3mm∞0.65mm
:Lead type
0.25mm∞1.25mm∞0.1mm thicꢀ
0.25mm∞0.7mm∞0.1mm thicꢀ
Leadless type
0.25mm∞1.25mm∞0.1mm thicꢀ
0.25mm∞0.65mm∞0.1mm thicꢀ
200ç
Environment
Solder composition
160ç
150ç
(ç)
Test board
Land dimensions
Metal masꢀ
(30 sec.)
(20 sec.
25ç
(60 sec.)
to 30 sec.)
60 sec. to 90 sec.
0
Preheating
Soldering
Start
60
120
Time (Seconds)
This temperature profile is based on the above conditions.
In individual applications the actual temperature may vary,
depending on solder paste type, volume/thicꢀness and board
size/thicꢀness. Consult your solder paste and equipment
manufacturer for specific recommendations.
Using Lead-free Solder paste
ꢀ
Max. 250ç
HRS test condition
Solder method
250
200
150
100
50
:Reflow, IR/hot air
230ç
(Nihon Den-netsu Co., Ltd.’s
Part Number: SENSBY NR-2)
:Room air
:Paste, 96.5%Sn/3.0%Ag/0.5%Cu
(Senju Metal Industry, Co., Ltd.’s
Part Number: M705-221CM5-42-10.5)
200ç
Environment
Solder composition
150ç
Test board
Land dimensions
:Glass epoxy 45mm∞100mm∞1.6mm thicꢀ
(ç)
: Lead type 0.3mm∞1.25mm,
0.3mm∞0.7mm
Leadless type 0.3mm∞1.25mm,
0.3mm∞0.65mm
Metal masꢀ
: Lead type
0.25mm∞1.25mm∞0.1mm thicꢀ
0.25mm∞0.7mm∞0.1mm thicꢀ
Leadless type
0.25mm∞1.25mm∞0.1mm thicꢀ
0.25mm∞0.65mm∞0.1mm thicꢀ
25ç
(60 sec.)
90 sec. to 120 sec.
(60 sec.)
0
Soldering
Preheating
Start
60
120
Time (Seconds)
In individual applications the actual temperature may vary,
depending on solder paste type, volume/thicꢀness and board
size/thicꢀness. Consult tour solder paste and equipment
manufacturer for specific recommendations.
49
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
BFH23 Series FPC Construction (Recommended Specifications)
1. Using Single-sided FPC
Material Name
Covering film layer.
Cover adhesive
Surface treatment
Copper foil
Material
Polyamide 1 mil thick.
Thickness (µm)
25
25
5
Tin-lead plating
Cu
1oz
35
25
25
30
75
195
Base adhesive
Base film
Polyamide
1 mil thick
Reinforcement material adhesive Heat-hardened adhesive
Stiffener
Polyamide
Total
3 mil thick
2. Using Double-sided FPC
Material Name
Material
Polyamide 1 mil thick
Thickness (µm)
Covering layer film
Cover adhesive
Surface treatment
Through-hole copper
Copper foil
25
25
5
Tin-lead plating
Cu
15
18
18
25
18
18
25
25
25
25
199
Cu
1/2oz
Base adhesive
Base film
Polyamide
Cu
1 mil thick
1/2oz
Base adhesive
Copper foil
Cover adhesive
Covering layer film
Polyamide
1 mil thick
Reinforcement material adhesive Heat-hardened adhesive
Stiffener
Polyamide
Total
1 mil thick
3. Precautions
Note : Recommended specification for FPC 0.2 0.03 mm thick.
FPC/FFC Manufactures' Contact List
Sumitomo Bakelite Co., Ltd. Flexible Printed Circuit Board Division
5-8, Higashi-shinagawa 2-chome, Shinagawa-ku, Tokyo, Japan
TEL:+81 3 5462 4191
FAX:+81 3 5462 4882
Fujikura Ltd. Electronics Global Marketing Department
1-5-1, Kiba, Koto-ku, Tokyo, Japan
TEL:+81 3 5606 1165
FAX:+81 3 5606 1530
NOK Corporation Sales Division Overseas Business Department
1-12-15, Shiba-Daimon, Minato-ku, Tokyo, Japan
TEL:+81 3 3432 6976/8415
FAX:+81 3 3432 3919
50
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
BConnector Operating Instructions, precautions and recommendations
Operation
Precautions
1) Do not apply excessive force or use any type of
tool to operate the actuator.
1.FPC Termination procedure. Connector
installed on the board.
1) Lift up the actuator. Use thumb or index finger.
2) Rotate down the actuator until firmly closed.
NOTE: The FPC must be fully inserted in the con-
nector. If not fully inserted, the actuator will not
close properly. Should this be the case, lift up the
actuator (per Step 2 below) and repeat the process
(starting with Step 1 above)
2) The connector will assure reliable performance
when the actuator is open to 90° maximum (see
fig.1) Do not exceed this angle, as this may cause
permanent damage to the connector.
90ç
3) For connectors with multiple contacts, such as 39
and 61 pos. rotate down the actuator pushing at
both ends.
3) Assure that the FPC is fully inserted parallel to
mounting surface, with the exposed conductive
traces facing down.
2.FPC Removal
1) Lift up the actuator.
2) Carefully remove the FPC.
FPC conductor surface
51
相关型号：
FH23-17S-0.3SHW
0.3mm Contact Pitch, 1.25mm above the board, Flexible Printed Circuit Connectors
HRS
FH23-17S-0.3SHW(05)
Card Edge Connector, 17 Contact(s), 1 Row(s), Female, Right Angle, 0.01 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator, HALOGEN FREE
HRS
FH23-17S-0.3SHW(51)
Card Edge Connector, 17 Contact(s), 1 Row(s), Female, Right Angle, 0.012 inch Pitch, Surface Mount Terminal, Locking
HRS
FH23-21S-0.3SHAW
0.3mm Contact Pitch, 1.25mm above the board, Flexible Printed Circuit Connectors
HRS
FH23-21S-0.3SHAW(51)
Card Edge Connector, 21 Contact(s), 1 Row(s), Female, Right Angle, 0.012 inch Pitch, Surface Mount Terminal, Locking
HRS
FH23-21S-0.3SHW
0.3mm Contact Pitch, 1.25mm above the board, Flexible Printed Circuit Connectors
HRS
FH23-21S-0.3SHW(51)
Card Edge Connector, 21 Contact(s), 1 Row(s), Female, Right Angle, 0.012 inch Pitch, Surface Mount Terminal, Locking
HRS
FH23-23S-0.3SHAW
0.3mm Contact Pitch, 1.25mm above the board, Flexible Printed Circuit Connectors
HRS
FH23-23S-0.3SHAW(05)
Card Edge Connector, 23 Contact(s), 1 Row(s), Female, Right Angle, 0.01 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator, HALOGEN FREE
HRS
FH23-23S-0.3SHAW(51)
Card Edge Connector, 23 Contact(s), 1 Row(s), Female, Right Angle, 0.012 inch Pitch, Surface Mount Terminal, Locking
HRS
FH23-23S-0.3SHW
0.3mm Contact Pitch, 1.25mm above the board, Flexible Printed Circuit Connectors
HRS
©2020 ICPDF网 联系我们和版权申明