FH26-25S-0.3SHW [HRS]
0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors; 0.3毫米接触间距为1mm的板,柔性印刷电路ZIF连接器上方型号: | FH26-25S-0.3SHW |
厂家: | HRS |
描述: | 0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors |
文件: | 总16页 (文件大小:650K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors
FH26 Series
Space saving(51 pos. shown)
ꢀ
3.2mm
Metal fittings do no protrude
outside of the connector body
ꢀFeatures
Can be mounted over conductive traces.
ꢀ
1. Extremely light weight
The typical version, with all 51 contacts loaded, weights
only 0.1 grams.
2. Easy solderability on the PC board
The soldering leads are on 0.6 mm pitch, exiting on front
and back of the connector.
No exposed contacts on the bottom
of the connector
3. Conductive traces on the PCB can run under
the connector
No exposed contacts on the bottom of the connector.
Operation
ꢀ
4. Easy FPC insertion and reliable electrical
connection
(1) Actuator open
(2) Insert FPC
Proven Flip LockR actuator allows easy insertion of FPC.
Tactile sensation when fully closed confirms complete
electrical and mechanical connection.
A ccttuuaattoorr
5. Accepts standard thickness FPC
0.2mm thick standard Flexible Printed Circuit board can
be used.
q
This is the only ultra-low profile ZIF connector allowing
the use of standard FPC.
6. Board placement with automatic equipment
Flat top surface and packaging on the tape-and-reel
allows use of vacuum nozzles.
w
FPC
Standard reel contains 5,000 connectors.
ꢀApplications
(3) Close the actuator
(4) FPC connected
Mobile phones, PDA's, digital cameras, digital video
cameras, LCD connections, plasma displays (PDP), camera
modules and other compact devices requiring Flexible
Printed Circuit connections using high reliability ultra-small
profile connectors.
e
r
2004.8
1
ꢀSpecifications
Operating temperature range -55
to +85 (Note 1)
ç ç
Current rating
Voltage rating
0.2A DC
30V AC
Storage temperature range -10
Storage humidity range
ç
to +50
ç
(Note 2)
Rating
Operating humidity range
Relative humidity 90%
max. (No condensation)
Relative humidity 90% max.
Thickness: = 0.2 0.03mm tin-lead plated (Note 3)
Recommended FPC :
Item
Specification
50 M ohms min.
Conditions
1. Insulation resistance
2. Withstanding voltage
100 V DC
No flashover or insulation breakdown.
90 V AC /one minute
100 m ohms max.
* Including FPC conductor resistance
3. Contact resistance
1 mA
4. Durability
Contact resistance: 100 m ohms max.
No damage, cracks, or parts dislocation.
10 cycles
(Insertion/ withdrawal)
No electrical discontinuity of 1µs or more.
Contact resistance: 100 m ohms max.
No damage, cracks, or parts dislocation.
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 10 cycles, 3
directions.
5. Vibration
6. Shock
No electrical discontinuity of 1µs. min.
Contact resistance: 100 m ohms max.
No damage, cracks, or parts dislocation.
2
Acceleration of 981 m/s , 6 ms duration, sine half-wave waveform,
3 cycles in each of the 3 axis
Contact resistance: 100 m ohms max.
Insulation resistance: 50 M ohms min.
No affect on appearance or performance.
7. Humidity
(Steady state)
96 hours at temperature of 40 2ç and humidity of 90% to 95%.
Contact resistance: 100 m ohms max.
Insulation resistance: 50 M ohms min.
No damage, cracks, or parts looseness.
Temperature: -55 ç/+15ç to +35ç/+85ç/+15ç to +35ç
Time: 30 / 2 to 3 / 30 / 2 to 3 (Minutes)
5 cycles
8. Temperature cycle
Reflow: At the recommended temperature profile
Manual soldering: 350ç +/-10ç for 5 1 seconds
9. Resistance to soldering heat
No deformation of components affecting performance.
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range
and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation.
Note 3: When FPC is gold plated, the connector contacts must be also gold plated: Specify the (05) plating code.
ꢀMaterials
Part
Material
LCP
Finish
Remarks
UL94V-0
Insulator
Actuator
Contacts
Metal fitting
Color: Black
PA
Color: Dark brown
---------------
---------------
Tin-lead plated (Note 3)
Tin plated (Lead free)
Phosphor bronze
ꢀOrdering information
FH26 - 51S - 0.3 SHW (05)
1
2
3
4
5
1 Series name: FH26
4 Terminal type: SHW(SMT horizontal mounting)
2
No. of contacts: 13, 21, 23, 25, 27, 33, 35, 39,
41, 45, 51, 57, 71
Plating specifications
Blank: Tin-lead plated
(05) : Gold flash plated
5
3
Contact pitch: 0.3mm
2
ꢀConnector Dimensions
A
B
0.3
(0.12)
0.6
Number of contacts indicator
C
0.6
(0.12)
0.5
0.3
3.2
(D: FPC insertion slot dimension)
E
1
0.1
1
0.1
1
2
Notes
The coplanarity of each terminal lead within specified dimension is 0.1 mm.
Packaged on tape and reel only. Check packaging specification.
All dimensions: mm
D E
Part Number
CL No.
Number of Contacts
A
B
C
FH26-13S-0.3SHW
FH26-21S-0.3SHW
FH26-23S-0.3SHW
FH26-25S-0.3SHW
FH26-27S-0.3SHW
FH26-33S-0.3SHW
FH26-35S-0.3SHW
FH26-39S-0.3SHW
FH26-41S-0.3SHW
FH26-45S-0.3SHW
FH26-51S-0.3SHW
FH26-57S-0.3SHW
FH26-71S-0.3SHW
CL580-0209-3
CL580-0207-8
CL580-0203-7
CL580-0208-0
CL580-0204-0
CL580-0210-2
CL580-0205-2
CL580-0201-1
CL580-0206-5
CL580-0211-5
CL580-0200-9
CL580-0212-8
CL580-0202-4
13
21
23
25
27
33
35
39
41
45
51
57
71
5.4
3.0
5.4
3.6
4.23
6.63
4.9
7.3
7.8
6.0
8.4
6.0
6.6
7.23
7.9
9.0
6.6
7.2
7.83
8.5
9.6
7.2
7.8
8.43
9.1
11.4
12.0
13.2
13.8
15.0
16.8
18.6
22.8
9.0
9.6
10.23
10.83
12.03
12.63
13.83
15.63
17.43
21.63
10.9
11.5
12.7
13.3
14.5
16.3
18.1
22.3
9.6
10.2
11.4
12.0
13.2
15.0
16.8
21.0
10.8
11.4
12.6
14.4
16.2
20.4
Embossed tape reel packaging (5,000 pieces/reel).
Order by number of reels.
3
BRecommended PCB mounting pattern and metal mask dimensions
B
0.05
0.3 0.03
0.6 0.05
(0.23:Metal mask)
Outline of
the connector
0.3 0.05
0.6 0.05
(0.3:Metal mask)
0.4 0.05
0.3 0.05
(0.23:Metal mask)
C
0.05
0.5 0.05
Detail H
BRecommended FPC Dimensions
(Lead plated 0.1 MAX)
F
0.05
0.03
0.3 0.07
C
0.3 0.07
(0.15)
0.6 0.02
+0.04
-0.03
0.3
0.3 0.02
H
0.2 0.03
B
A
+0.04
-0.03
0.3
0.1 0.02
(0.2)
(0.2)
(0.07)
0.6 0.07
B
0.03
0.6 0.07
Overlap between covering film layer and stiffener.
1
All dimensions: mm
Part Number
FH26-13S-0.3SHW
FH26-21S-0.3SHW
FH26-23S-0.3SHW
FH26-25S-0.3SHW
FH26-27S-0.3SHW
FH26-33S-0.3SHW
FH26-35S-0.3SHW
FH26-39S-0.3SHW
FH26-41S-0.3SHW
FH26-45S-0.3SHW
FH26-51S-0.3SHW
FH26-57S-0.3SHW
FH26-71S-0.3SHW
CL No.
Number of Contacts
B
C
F
CL580-0209-3
CL580-0207-8
CL580-0203-7
CL580-0208-0
CL580-0204-0
CL580-0210-2
CL580-0205-2
CL580-0201-1
CL580-0206-5
CL580-0211-5
CL580-0200-9
CL580-0212-8
CL580-0202-4
13
21
23
25
27
33
35
39
41
45
51
57
71
3.0
3.6
6.0
4.2
5.4
6.6
6.0
6.6
7.2
6.6
7.2
7.8
7.2
7.8
8.4
9.0
9.6
10.2
10.8
12.0
12.6
13.8
15.6
17.4
21.6
9.6
10.2
11.4
12.0
13.2
15.0
16.8
21.0
10.8
11.4
12.6
14.4
16.2
20.4
4
BPackaging Specification
Embossed Carrier Tape Dimensions (Tape width of 24mm max.)
ꢀ
8
0.1
4
0.1
2
0.15
(1.6)
(0.3)
(3.05)
(4.55)
Flat surface, for placement with automatic equipment
Unreeling direction
(1.25)
All dimensions: mm
Part Number
FH26-13S-0.3SHW
FH26-21S-0.3SHW
FH26-23S-0.3SHW
FH26-25S-0.3SHW
FH26-27S-0.3SHW
FH26-33S-0.3SHW
FH26-35S-0.3SHW
FH26-39S-0.3SHW
FH26-41S-0.3SHW
FH26-45S-0.3SHW
FH26-51S-0.3SHW
CL No.
Number of Contacts
G
J
K
L
CL580-0209-3
CL580-0207-8
CL580-0203-7
CL580-0208-0
CL580-0204-0
CL580-0210-2
CL580-0205-2
CL580-0201-1
CL580-0206-5
CL580-0211-5
CL580-0200-9
13
21
23
25
27
33
35
39
41
45
51
16
16
16
16
16
24
24
24
24
24
24
7.5
5.6
16.5
16.5
16.5
16.5
16.5
24.5
24.5
24.5
24.5
24.5
24.5
7.5
8.0
7.5
8.6
7.5
9.2
7.5
9.8
11.5
11.5
11.5
11.5
11.5
11.5
11.6
12.2
13.4
14.0
15.2
17.0
5, 000 pieces per reel.
Embossed Carrier Tape Dimensions (Tape width of 32mm min.)
ꢀ
(1.6)
(0.3)
1.5 +0.1
(3.05)
(4.55)
0
Unreeling direction
Flat surface, for placement with automatic equipment
(1.25)
All dimensions: mm
Part Number
FH26-57S-0.3SHW
FH26-71S-0.3SHW
CL No.
Number of Contacts
G
H
J
K
L
CL580-0212-8
CL580-0202-4
57
71
32
44
28.4
40.4
14.2
20.2
18.8
23.0
32.5
44.5
5
Reel Dimensions
ꢀ
(2)
(L)
Unreeling direction
End section
Mounting section
Lead section (400mm min.)
Connectors
Embossed carrier tape
Blank section
(10 pockets min.)
Blank section
(10 pockets min.)
Top cover tape
6
BRecommended Temperature Profile
Using Typical Solder Paste
ꢀ
HRS test conditions
Solder method
5 sec. m ax.
240℃
:Reflow, IR/hot air
250
200
150
100
50
(Nihon Den-netsu Co., Ltd.'s
Part Number: SENSBY NR-2)
:Room air
Environment:
200℃
Solder composition: :Paste, 63%Sn/37%Pb
(Senju Metal Industry, Co., Ltd.'s
Part Number: OZ63-201C-50-9)
Glass epoxy 25mm 50mm 0.8mm thick
160℃
150℃
Test board
Land dimensions
Metal mask
:
∞
∞
(℃)
:0.3mm∞0.65mm,0.3mm∞0.8mm
:0.23∞0.55∞0.1mm thick,
0.23∞0.65∞0.1mm thick
The temperature profiles are based on the above conditions.
In individual applications the actual temperature may
vary,depending on solder paste type, volume/thickness and
board size/thickness. Consult your solder paste and
equipment manufacturer for specific recommendations.
(30sec.)
20 sec. to
30 sec.
25℃
(60sec.) 60 sec. to 90 sec.
0
Preheating
120
Tim e (Seconds)
Soldering
Start
60
Using Lead-free Solder Paste
ꢀ
HRS test conditions
Solder method
M AX 250℃
230℃
:Reflow, IR/hot air
250
200
150
100
50
(Nihon Den-netsu Co., Ltd.'s
Part Number: SENSBY NR-NR-2)
:Room air
Environment
200℃
Solder composition :Paste, 96.5%Sn/3.0%Ag/0.5%Cu
(Senju Metal Industry, Co., Ltd.'s
Part Number: M705-221CM5-42-10.5)
Test board
Land dimensions
Metal mask
:
Glass epoxy 25mm 0.8mm thick
∞
50mm
∞
150℃
:0.3mm 0.65mm, 0.3mm∞0.8mm
∞
(℃)
:0.23
0.23
∞
0.55
∞
0.1mm thick,
0.1mm thick
∞0.65
∞
The temperature profiles are based on the above conditions.
In individual applications the actual temperature may vary,
depending on solder paste type, volume/thickness and board
size/thickness. Consult your solder paste and equipment
manufacturer for specific recommendations.
25℃
(60sec.) 90 sec. to 120 sec.
(60sec.)
Soldering
0
Preheating
120
Tim e (Seconds)
Start
60
7
BRecommended FPC Construction
Contact FPC manufacturer for specific details.
ꢀ
1. Using Single-sided FPC
Material Name
Covering film layer.
Cover adhesive
Surface treatment
Copper foil
Material
Polyamide 1 mil thick.
Thickness (µm)
Connecting side
25
25
5
Tin-lead plated
Cu
1/2oz
35
25
25
40
75
205
Base adhesive
Base film
Thermosetting adhesive
Polyamide
1 mil thick
Reinforcement material adhesive Thermosetting adhesive
Stiffener
Polyamide
Total
3 mil thick
Back side
2. Using Double-sided FPC
Material Name
Material
Polyamide 1 mil thick
Thickness (µm)
Connecting side
Covering layer film
Cover adhesive
Surface treatment
Through-hole copper
Copper foil
25
25
5
Tin-lead plated
Cu
15
18
18
25
18
18
25
25
25
25
199
Cu
1/2oz
Base adhesive
Base film
Thermosetting adhesive
Polyamide
Thermosetting adhesive
Cu 1/2oz
Thermosetting adhesive
Polyamide 1 mil thick
1 mil thick
Base adhesive
Copper foil
Cover adhesive
Covering layer film
Reinforcement material adhesive Thermosetting adhesive
Stiffener
Polyamide
Total
1 mil thick
Back side
To prevent release of the FPC due to it's bending, use of double sided FPC with copper foil on the back side is NOT RECOMMENDED.
ꢀ
8
BOperation and Precautions
Operation
1.FPC insertion procedure. Connector installed on the board.
1 Lift up the actuator. Use thumb or index finger.
2 Fully insert the FPC in the connector parallel to
mounting surface, with the exposed conductive
traces facing down.
FPC conductor
surface (Bottom side)
3 Rotate down the actuator until firmly closed. It is
critical that the inserted FPC is not moved and
remains fully inserted.
2.FPC removal
1 Lift up the actuator. Carefully withdraw the
FPC.
9
Precautions
Exercise care when handling connectors. Follow recommendations given below.
PC board flexing
SPC board connector mounting area
The connectors are straight within 0.1 mm max.
Make sure that the PC board connector mounting area flatness can accept the connector terminals without
causing any failure of the solder joints.
SHandling before mounting on PCB
Insertion of the FPC or operation of the actuator prior to mounting on the PCB is NOT RECOMMENDED.
SPC Board handling
Exercise caution when handling boards with the connectors installed. Do not apply any forces affecting
soldered joints.
Connector
PCB
Precautions When Inserting or Coupling FPC
Pay attention to the following points when inserting FPC.
SActuator operation
Do not apply excessive force when opening the actuator prior to FPC insertion. When opening make sure
that the force is applied only to the actuator itself, avoiding touching of the contacts.
1
Actuator
Damage to the contacts
Damage
Axis of rotation
2 Axis of rotation
Assure free rotation of
the actuator
10
Precautions
135˚
3 The actuator will rotate 135 degrees
maximum. Do not apply force to rotate
further.
4 When operating the actuator, do so at the
center portion.
As illustrated, do not attempt removal or re-
positioning of the actuator.
5
S FPC Insertionq
The FPC should be aligned parallel with the board surface and perpendicular with the connector (as
shown), then completely inserted.
Perpendicular with
the connector
To assure correct electrical and mechanical connection do not insert FPC at angle. It must be fully inserted.
Make sure that the FPC is NOT MOVED during the closing of the actuator.
11
Precautions
SFPC Insertionw
Do not insert the FPC at any angle from above.
As illustrated, angle insertion may cause electrical discontinuity when the FPC is deflected in use.
*To avert insertion of the FPC on an angle, consideration should be given to securing FPC insertion space
at the time of board layout. Insertion will be difficult when the FPC is too short.
*Contact the FPC manufacturer for information about the bending specifications.
SVerification of the fully closed actuator.
The actuator should be fully closed (as illustrated) and the FPC held firmly in the connector.
Do not press against the actuator when is fully closed. Max force applied to the fully closed actuator should
not exceed 1 N.
Routing the FPC (FPC fully inserted/ actuator closed)
SFPC Load
Do not apply force in excess of 0.05N/pin max. in the upward direction (as illustrated). Do not bend the
FPC too close to the actuator.
Load: 0.05N/pin max.
12
Precautions
Removing the FPC
Rotate the actuator to the open position (maximum open angle of 135°). Carefully withdraw the FPC.
135˚
Other Precautions
SHand Soldering Precautions
When hand soldering:
1
2
3
Do not perform reflow or hand soldering with the FPC inserted in the connector.
Do not apply excessive heat or touch the soldering iron anywhere other than the connector leads.
Do not use excessive amount of solder or flux compounds.
Operation of the actuator and contacts may be affected by excessive amounts of solder or flux
compounds.
13
:
NOTES
14
:
NOTES
15
NOTES :
GERMANY:
HIROSE ELECTRIC GmbH
Zeppelinstrasse 42 D-73760 Ostfildern Kemnat
Phone : 49 711 4560021
Fax : 49 711 4560729
THE NETHERLANDS:
USA:
HIROSE ELECTRIC EUROPE B.V.
Beechavenue 46.1119PV
Schiphol-Rijk
Phone : 31 20 6557460
Fax : 31 20 6557469
HIROSE ELECTRIC U.S.A., INC.
2688 Westhills Court, Simi Valley, CA 93065-6235
Phone : 1 805 522 7958
Fax : 1 805 522 3217
http://www.hirose.de
http://www.hiroseusa.com
http://www.hiroseeurope.com
UNITED KINGDOM:
CHINA:
KOREA:
HIROSE ELECTRIC UK LTD.
HIROSE ELECTRIC TRADING(SHANGHAI) CO., LTD.
3705,Bund Center,222 Yan An Road(E),Shanghai 20002
Phone : 86 21 6335 2538
HIROSE KOREA CO., LTD.
Crownhill Business Centre 22 Vincent Avenue
Crownhill, Milton Keynes MK8 OAB
Phone : 44 1908 305400
(#2NA311,Shihwa Industrial Complex),
1261-10, Jeoungwhang-Dong, Shihung-City, Kyunggi-Do
Phone : 82 31 496 7000,7124
Fax : 82 31 496 7100
Fax : 86 21 6335 0767
Fax : 44 1908 305401
http://www.hirose.co.uk
http://www.hirose.co.kr
HONG KONG:
SINGAPORE:
TAIWAN:
HIROSE ELECTRIC CO., LTD.
Unit 506, Energy Plaza. 92 Granville Road, Tsim Sha
Tsui East, Kowloon
Phone : 852 2803 5338
Fax : 852 2591 6560
HIROSE ELECTRIC CO., LTD.
10 Anson Road #34-13 International Plaza 079903
Phone : 65 6324 6113
HIROSE ELECTRIC TAIWAN CO., LTD.
No.28 Lane 247 Sec. 2 Yen Ping N,Rd.Taipei
Phone : 886 2 2557 7351,7352
Fax : 886 2 2552 9851
65 6324 6123
Fax :
®
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933
http://www.hirose.com
http://www.hirose-connectors.com
The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.
16
相关型号:
FH26-25S-0.3SHW(05)
Card Edge Connector, 25 Contact(s), 2 Row(s), Female, Right Angle, 0.012 inch Pitch, Surface Mount Terminal, Locking, Black Insulator, ROHS COMPLIANT
HRS
FH26-25S-0.3SHW(98)
Card Edge Connector, 25 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal,
HRS
FH26-25S-0.3SHW(99)
Card Edge Connector, 25 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal,
HRS
FH26-27S-0.3SHW
0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors
HRS
FH26-27S-0.3SHW(05)
Card Edge Connector, 27 Contact(s), 2 Row(s), Female, Right Angle, 0.012 inch Pitch, Surface Mount Terminal, Locking, Black Insulator, ROHS COMPLIANT
HRS
FH26-27S-0.3SHW(58)
Card Edge Connector, 27 Contact(s), 1 Row(s), Right Angle, 0.012 inch Pitch, Surface Mount Terminal, Locking
HRS
FH26-27S-0.3SHW(98)
Card Edge Connector, 27 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal,
HRS
FH26-27S-0.3SHW(99)
Card Edge Connector, 27 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal,
HRS
FH26-29S-0.3SHW
0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors
HRS
FH26-29S-0.3SHW(05)
Card Edge Connector, 29 Contact(s), 2 Row(s), Female, Right Angle, 0.012 inch Pitch, Surface Mount Terminal, Black Insulator, ROHS COMPLIANT
HRS
FH26-29S-0.3SHW(10)
Card Edge Connector, 29 Contact(s), 2 Row(s), Female, Right Angle, 0.024 inch Pitch, Surface Mount Terminal, Locking, Black Insulator, ROHS COMPLIANT
HRS
FH26-29S-0.3SHW(99)
Card Edge Connector, 29 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal,
HRS
©2020 ICPDF网 联系我们和版权申明