FH26W-71S-0.3SHW(98) [HRS]
Card Edge Connector, 71 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal, HALOGEN FREE;
| 型号： | FH26W-71S-0.3SHW(98) |
| 厂家： | 
HRS |
| 描述： | Card Edge Connector, 71 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal, HALOGEN FREE |
| 文件： | 总12页 (文件大小：656K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors
FH26 Series
Space saving(51 pos. shown)
ꢁ
3.2mm
Metal fittings do no protrude
outside of the connector body
ꢀFeatures
Can be mounted over conductive traces.
ꢁ
1. Extremely light weight
The typical version, with all 51 contacts loaded, weights
only 0.1 grams.
2. Easy solderability on the PC board
The soldering leads are on 0.6 mm pitch, exiting on front
and back of the connector.
No exposed contacts on the bottom
of the connector
3. Conductive traces on the PCB can run under the
connector
Operation
ꢁ
No exposed contacts on the bottom of the connector.
(1) Actuator open
(2) Insert FPC
4. Easy FPC insertion and reliable electrical
connection
Proven Flip LockR actuator allows easy insertion of FPC.
Tactile sensation when fully closed confirms complete
electrical and mechanical connection.
Actuator
q
5. Accepts standard thickness FPC
0.2mm thick standard Flexible Printed Circuit board can be
used.
w
This is the only ultra-low profile ZIF connector allowing the
use of standard FPC.
FPC
6. Board placement with automatic equipment
Flat top surface and packaging on the tape-and-reel allows
use of vacuum nozzles.
(3) Close the actuator
(4) FPC connected
Standard reel contains 5,000 connectors.
7. The connector does not use chlorine and
bromine exceeding standard limits.
(FH26W series)
e
* Defined in accordance with IEC61249-2-21
Br 900ppm or lower, Cl 900ppm or lower, Br + Cl
1,500ppm or lower
8. Available for 500 pieces packaging
Although the normal product is 5,000 pieces per reel,
500 winds per reel is also available.
r
(Emboss reel external diameter is Ø180mm.)
2010.9
1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH26 Seriesꢁ0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors
ꢀSpecifications
Operating temperature range -55
to +85 (Note 1)
ç ç
Current rating
Voltage rating
0.2A DC
30V AC
Storage temperature range -10
ç
to +50
ç
(Note 2)
Rating
Operating humidity range
Relative humidity 90ꢀ
max. (No condensation)
Storage humidity range
Relative humidity 90ꢀ max.
Thickness: = 0.2 0.03mm gold plated
Recommended FPC :
Item
Specification
50 M ohms min.
Conditions
1. Insulation resistance
2. Withstanding voltage
100 V DC
No flashover or insulation breakdown.
90 V AC /one minute
100 m ohms max.
* Including FPC conductor resistance
3. Contact resistance
1 mA
4. Durability
(Insertion/ withdrawal)
Contact resistance: 100 m ohms max.
No damage, cracks, or parts dislocation.
10 cycles
No electrical discontinuity of 1µs or more.
Contact resistance: 100 m ohms max.
No damage, cracks, or parts dislocation.
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 10 cycles, 3
directions.
5. Vibration
6. Shock
No electrical discontinuity of 1µs. min.
Contact resistance: 100 m ohms max.
No damage, cracks, or parts dislocation.
2
Acceleration of 981 m/s , 6 ms duration, sine half-wave waveform,
3 cycles in each of the 3 axis
Contact resistance: 100 m ohms max.
Insulation resistance: 50 M ohms min.
No affect on appearance or performance.
7. Humidity
(Steady state)
96 hours at temperature of 40 2ç and humidity of 90ꢀ to 95ꢀ.
Contact resistance: 100 m ohms max.
Insulation resistance: 50 M ohms min.
No damage, cracks, or parts looseness.
Temperature: -55 ç/+15ç to +35ç/+85ç/+15ç to +35ç
Time: 30 / 2 to 3 / 30 / 2 to 3 (Minutes)
5 cycles
8. Temperature cycle
Reflow: At the recommended temperature profile
Manual soldering: 350ç +/-10ç for 5 1 seconds
9. Resistance to soldering heat
No deformation of components affecting performance.
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range
and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation.
ꢀMaterials
Part
Material
Finish
Remarks
UL94V-0
LCPColor: Black
Insulator
FH26 series: Deep brown
FH26W series: Light brown
Gold plating
PA
UL94HB
---------------
---------------
Contacts
Phosphor bronze
Metalfittings
Pure tin reflow plating
ꢀOrdering information
( )
FH 26 W - 51S - 0.3 SHW 05
2
3
1
4
5
6
7
1 Series name: FH
6 Termination type SHW: SMT horizontal staggered mounting type
7 Specifications
2
3
Series No.: 26
Blank: Standard
(05)…Gold plating, 5,000 pieces / reel
W:
Satisfies halogen-free requirements
(Flame retardance UL94HB).
(10)…Gold plating with nickel barrier, 5,000 pieces / reel
(98)…Gold plating, 500 pieces / reel
4 Number of positions: 13 to 71
5 Contact pitch: 0.3mm
(99)…Gold plating with nickel barrier, 500 pieces / reel
2
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH26 Seriesꢁ0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors
ꢀConnector Dimensions
A
0.3
B
(0.12)
0.6
Number of contacts indicator
C
0.6
(0.12)
0.5
0.3
3.2
(D: FPC insertion slot dimension)
E
1
0.1
1
0.1
1
2
3
4
Notes
The coplanarity of each terminal lead within specified dimension is 0.1 mm Max.
Packaged on tape and reel only. Check packaging specification.
Slight variations in color of the plastic compounds do not affect form, fit or function of the connector.
After reflow, the terminal plating may change color, however this does not represent a quality issue.
All dimensions: mm
Part Number
CL No.
Number of Contacts
A
B
C
D
E
FH26-13S-0.3SHW(**)
FH26-15S-0.3SHW(**)
FH26-17S-0.3SHW(**)
FH26-21S-0.3SHW(**)
FH26-23S-0.3SHW(**)
FH26-25S-0.3SHW(**)
FH26-27S-0.3SHW(**)
FH26-29S-0.3SHW(**)
FH26-31S-0.3SHW(**)
FH26-33S-0.3SHW(**)
FH26-35S-0.3SHW(**)
FH26-37S-0.3SHW(**)
FH26-39S-0.3SHW(**)
FH26-41S-0.3SHW(**)
FH26-45S-0.3SHW(**)
FH26-51S-0.3SHW(**)
FH26-55S-0.3SHW(**)
FH26-57S-0.3SHW(**)
FH26-61S-0.3SHW(**)
FH26-71S-0.3SHW(**)
580-0209-3-**
580-0218-4-**
580-0217-1-**
580-0207-8-**
580-0203-7-**
580-0208-0-**
580-0204-0-**
580-0216-9-**
580-0214-3-**
580-0210-2-**
580-0205-2-**
580-0224-7-**
580-0201-1-**
580-0206-5-**
580-0211-5-**
580-0200-9-**
580-0221-9-**
580-0212-8-**
580-0213-0-**
580-0202-4-**
13
15
17
21
23
25
27
29
31
33
35
37
39
41
45
51
55
57
61
71
5.4
6.0
6.6
7.8
8.4
3.0
3.6
4.2
5.4
6.0
6.6
7.2
7.8
8.4
3.6
4.2
4.8
6.0
6.6
7.2
7.8
8.4
9.0
4.23
4.83
5.43
6.63
7.23
7.83
8.43
9.03
9.63
10.23
10.83
11.43
12.03
12.63
13.83
15.63
16.83
17.43
18.63
21.63
4.9
5.5
6.1
7.3
7.9
8.5
9.1
9.7
10.3
10.9
11.5
12.1
12.7
13.3
14.5
16.3
17.5
18.1
19.3
22.3
9.0
9.6
10.2
10.8
11.4
12.0
12.6
13.2
13.8
15.0
16.8
18.0
18.6
19.8
22.8
9.0
9.6
9.6
10.2
10.8
11.4
12.0
13.2
15.0
16.2
16.8
18.0
21.0
10.2
10.8
11.4
12.6
14.4
15.6
16.2
17.4
20.4
Part Number
CL No.
Number of Contacts
A
B
C
D
E
FH26W-13S-0.3SHW(**)
FH26W-15S-0.3SHW(**)
FH26W-17S-0.3SHW(**)
FH26W-19S-0.3SHW(**)
FH26W-21S-0.3SHW(**)
FH26W-23S-0.3SHW(**)
FH26W-25S-0.3SHW(**)
FH26W-27S-0.3SHW(**)
FH26W-29S-0.3SHW(**)
FH26W-31S-0.3SHW(**)
FH26W-33S-0.3SHW(**)
FH26W-35S-0.3SHW(**)
FH26W-37S-0.3SHW(**)
FH26W-39S-0.3SHW(**)
FH26W-41S-0.3SHW(**)
FH26W-45S-0.3SHW(**)
FH26W-51S-0.3SHW(**)
FH26W-57S-0.3SHW(**)
FH26W-61S-0.3SHW(**)
FH26W-71S-0.3SHW(**)
580-2401-1-**
580-2402-4-**
580-2403-7-**
580-2437-9-**
580-2404-0-**
580-2405-2-**
580-2406-5-**
580-2400-9-**
580-2407-8-**
580-2408-0-**
580-2409-3-**
580-2410-2-**
580-2411-5-**
580-2412-8-**
580-2413-0-**
580-2414-3-**
580-2415-6-**
580-2417-1-**
580-2418-4-**
580-2419-7-**
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
45
51
57
61
71
5.4
6.0
6.6
7.2
7.8
8.4
9.0
9.6
10.2
10.8
11.4
12.0
12.6
13.2
13.8
15.0
16.8
18.6
19.8
22.8
3
3.6
4.2
4.8
5.4
6.0
6.6
7.2
7.8
8.4
9.0
9.6
10.2
10.8
11.4
12.6
14.4
16.2
17.4
20.4
3.6
4.2
4.8
5.4
6.0
6.6
7.2
7.8
4.23
4.83
5.43
6.03
6.63
7.23
7.83
8.43
4.9
5.5
6.1
6.7
7.3
7.9
8.5
9.1
8.4
9.0
9.6
9.03
9.63
9.7
10.3
10.9
11.5
12.1
12.7
13.3
14.5
16.3
18.1
19.3
22.3
10.23
10.83
11.43
12.03
12.63
13.83
15.63
17.43
18.63
21.63
10.2
10.8
11.4
12.0
13.2
15.0
16.8
18.0
21.0
Note1 : Embossed tape reel packaging. Order by number of reels.
Note2 : ** : Specification. Refer to ordering information.
3
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH26 Seriesꢁ0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors
ꢀRecommended PCB mounting pattern and metal mask dimensions
Recommended metal mask thickness: t=0.1
B
0.05
0.3 0.03
0.6 0.05
(0.23:Metal mask)
Outline of
the connector
0.3 0.05
0.6 0.05
(0.3:Metal mask)
0.4 0.05
0.3 0.03
(0.23:Metal mask)
C
0.05
0.5 0.05
Detail H
ꢀRecommended FPC Dimensions
(Lead plated 0.1 MAX)
F
0.05
0.3 0.07
C
0.03
0.3 0.07
(0.15)
0.6 0.02
+0.04
-0.03
0.3
0.3 0.02
H
0.2 0.03
B
A
+0.04
-0.03
0.3
0.1 0.02
(0.2)
(0.2)
(0.05)
(0.15)
(0.07)
0.6 0.07
B
0.03
0.6 0.07
1
Dimention M must be 0.5mm minimum when the stiffener is shorter than 3.5 min.
All dimensions: mm
Number of
Number of
Part Number
CL No.
B
C
F
Part Number
CL No.
B
C
F
Contacts
13
15
17
21
23
25
27
29
31
33
35
37
39
41
45
51
55
57
61
71
Contacts
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
45
51
57
61
71
FH26-13S-0.3SHW(**) 580-0209-3-**
FH26-15S-0.3SHW(**) 580-0218-4-**
FH26-17S-0.3SHW(**) 580-0217-1-**
FH26-21S-0.3SHW(**) 580-0207-8-**
FH26-23S-0.3SHW(**) 580-0203-7-**
FH26-25S-0.3SHW(**) 580-0208-0-**
FH26-27S-0.3SHW(**) 580-0204-0-**
FH26-29S-0.3SHW(**) 580-0216-9-**
FH26-31S-0.3SHW(**) 580-0214-3-**
FH26-33S-0.3SHW(**) 580-0210-2-**
FH26-35S-0.3SHW(**) 580-0205-2-**
FH26-37S-0.3SHW(**) 580-0224-7-**
FH26-39S-0.3SHW(**) 580-0201-1-**
FH26-41S-0.3SHW(**) 580-0206-5-**
FH26-45S-0.3SHW(**) 580-0211-5-**
FH26-51S-0.3SHW(**) 580-0200-9-**
FH26-55S-0.3SHW(**) 580-0221-9-**
FH26-57S-0.3SHW(**) 580-0212-8-**
FH26-61S-0.3SHW(**) 580-0213-0-**
FH26-71S-0.3SHW(**) 580-0202-4-**
3.0
3.6
4.2
5.4
6.0
6.6
7.2
7.8
8.4
9.0
3.6
4.2
4.8
6.0
6.6
7.2
7.8
8.4
9.0
4.2
4.8
5.4
6.6
7.2
7.8
8.4
9.0
9.6
FH26W-13S-0.3SHW(**) 580-2401-1-**
FH26W-15S-0.3SHW(**) 580-2402-4-**
FH26W-17S-0.3SHW(**) 580-2403-7-**
FH26W-19S-0.3SHW(**) 580-2437-9-**
FH26W-21S-0.3SHW(**) 580-2404-0-**
FH26W-23S-0.3SHW(**) 580-2405-2-**
FH26W-25S-0.3SHW(**) 580-2406-5-**
FH26W-27S-0.3SHW(**) 580-2400-9-**
FH26W-29S-0.3SHW(**) 580-2407-8-**
FH26W-31S-0.3SHW(**) 580-2408-0-**
FH26W-33S-0.3SHW(**) 580-2409-3-**
FH26W-35S-0.3SHW(**) 580-2410-2-**
FH26W-37S-0.3SHW(**) 580-2411-5-**
FH26W-39S-0.3SHW(**) 580-2412-8-**
FH26W-41S-0.3SHW(**) 580-2413-0-**
FH26W-45S-0.3SHW(**) 580-2414-3-**
FH26W-51S-0.3SHW(**) 580-2415-6-**
FH26W-57S-0.3SHW(**) 580-2417-1-**
FH26W-61S-0.3SHW(**) 580-2418-4-**
FH26W-71S-0.3SHW(**) 580-2419-7-**
3.0
3.6
4.2
4.8
5.4
6.0
6.6
7.2
7.8
8.4
9.0
3.6
4.2
4.8
5.4
6.0
6.6
7.2
7.8
8.4
9.0
4.2
4.8
5.4
6.0
6.6
7.2
7.8
8.4
9.0
9.6
9.6 10.2
9.6 10.2 10.8
10.2 10.8 11.4
10.8 11.4 12.0
11.4 12.0 12.6
12.6 13.2 13.8
14.4 15.0 15.6
15.6 16.2 16.8
16.2 16.8 17.4
17.4 18.0 18.6
20.4 21.0 21.6
9.6 10.2
9.6 10.2 10.8
10.2 10.8 11.4
10.8 11.4 12.0
11.4 12.0 12.6
12.6 13.2 13.8
14.4 15.0 15.6
16.2 16.8 17.4
17.4 18.0 18.6
20.4 21.0 21.6
4
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH26 Seriesꢁ0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors
ꢀRecommended FPC Construction
Contact FPC manufacturer for specific details.
ꢁ
1. Using Single-sided FPC
Material Name
Covering film layer.
Cover adhesive
Material
Polyimide 1 mil thick.
Thickness (µm)
25
25
Connecting side
1µm to 5µm Nickel underplated
0.2µm Gold plated
Surface treatment
3
Copper foil
Base adhesive
Base film
Cu
Thermosetting adhesive
Polyimide 1 mil thick
1/2oz
35
25
25
Reinforcement material adhesive Thermosetting adhesive
40
Stiffener
Polyimide
Total
3 mil thick
75
203
Back side
2. Using Double-sided FPC
Material Name
Material
Polyimide 1 mil thick
Thickness (µm)
Covering layer film
Cover adhesive
25
25
Connecting side
1µm to 5µm Nickel underplated
0.2µm Gold plated
Surface treatment
3
Through-hole copper
Copper foil
Cu
15
18
18
25
18
18
25
25
25
25
197
Cu
Thermosetting adhesive
Polyimide 1 mil thick
Thermosetting adhesive
Cu 1/2oz
Thermosetting adhesive
Polyimide 1 mil thick
1/2oz
Base adhesive
Base film
Base adhesive
Copper foil
Cover adhesive
Covering layer film
Reinforcement material adhesive Thermosetting adhesive
Stiffener
Polyimide
Total
1 mil thick
Back side
To prevent release of the FPC due to it's bending, use of double sided FPC with copper foil on the back side is NOT RECOMMENDED.
ꢁ
3. Precautions
1. This specification is a recommendation for the construction of the FH26 Series FPC and FFC (t=0.2 0.03).
2. For details about the construction, please contact the FPC/FFC manufacturers.
5
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH26 Seriesꢁ0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors
ꢀPackaging Specification
Embossed Carrier Tape Dimensions
ꢁ
(Tape width of 24mm max.)
Embossed Carrier Tape Dimensions
ꢁ
(Tape width of 32mm min.)
(1.6)
(0.3)
8
0.1
4
0.1 2 0.15
(1.6)
(0.3)
(3.05)
(4.55)
Flat surface,
for placement with
automatic equipment
Unreeling direction
(3.05)
(4.55)
(1.25)
Unreeling direction
1.5+0.1
0
Flat surface,
for placement with
automatic equipment
(1.25)
Reel Dimensions
ꢁ
Unreeling direction
(L : INSIDE)
(M : OUTSIDE)
End section
Mounting section
Lead section (400mm min.)
Connectors
Embossed carrier tape
Blank section
Blank section
Top cover tape
(10 pockets min.)
(10 pockets min.)
6
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH26 Seriesꢁ0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors
All dimensions: mm
Part Number
CL No.
Number of Contacts
G
H
J
K
L
M
FH26-13S-0.3SHW(**)
FH26-15S-0.3SHW(**)
FH26-17S-0.3SHW(**)
FH26-21S-0.3SHW(**)
FH26-23S-0.3SHW(**)
FH26-25S-0.3SHW(**)
FH26-27S-0.3SHW(**)
FH26-29S-0.3SHW(**)
FH26-31S-0.3SHW(**)
FH26-33S-0.3SHW(**)
FH26-35S-0.3SHW(**)
FH26-37S-0.3SHW(**)
FH26-39S-0.3SHW(**)
FH26-41S-0.3SHW(**)
FH26-45S-0.3SHW(**)
FH26-51S-0.3SHW(**)
FH26-55S-0.3SHW(**)
FH26-57S-0.3SHW(**)
FH26-61S-0.3SHW(**)
FH26-71S-0.3SHW(**)
580-0209-3-**
580-0218-4-**
580-0217-1-**
580-0207-8-**
580-0203-7-**
580-0208-0-**
580-0204-0-**
580-0216-9-**
580-0214-3-**
580-0210-2-**
580-0205-2-**
580-0224-7-**
580-0201-1-**
580-0206-5-**
580-0211-5-**
580-0200-9-**
580-0221-9-**
580-0212-8-**
580-0213-0-**
580-0202-4-**
13
15
17
21
23
25
27
29
31
33
35
37
39
41
45
51
55
57
61
71
16
16
16
16
16
16
16
24
24
24
24
24
24
24
24
24
32
32
32
44
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
7.5
7.5
7.5
7.5
7.5
5.6
6.2
6.8
8.0
8.6
17.4
17.4
17.4
17.4
17.4
17.4
17.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
33.4
33.4
33.4
45.4
21.4
21.4
21.4
21.4
21.4
21.4
21.4
29.4
29.4
29.4
29.4
29.4
29.4
29.4
29.4
29.4
37.4
37.4
37.4
49.4
7.5
7.5
9.2
9.8
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
14.2
14.2
14.2
20.2
10.4
11.0
11.6
12.2
12.8
13.4
14.0
15.2
17.0
18.2
18.8
20.0
23.0
28.4
28.4
28.4
40.4
Part Number
CL No.
Number of Contacts
G
H
J
K
L
M
FH26W-13S-0.3SHW(**)
FH26W-15S-0.3SHW(**)
FH26W-17S-0.3SHW(**)
FH26W-19S-0.3SHW(**)
FH26W-21S-0.3SHW(**)
FH26W-23S-0.3SHW(**)
FH26W-25S-0.3SHW(**)
FH26W-27S-0.3SHW(**)
FH26W-29S-0.3SHW(**)
FH26W-31S-0.3SHW(**)
FH26W-33S-0.3SHW(**)
FH26W-35S-0.3SHW(**)
FH26W-37S-0.3SHW(**)
FH26W-39S-0.3SHW(**)
FH26W-41S-0.3SHW(**)
FH26W-45S-0.3SHW(**)
FH26W-51S-0.3SHW(**)
FH26W-57S-0.3SHW(**)
FH26W-61S-0.3SHW(**)
FH26W-71S-0.3SHW(**)
580-2401-1-**
580-2402-4-**
580-2403-7-**
580-2437-9-**
580-2404-0-**
580-2405-2-**
580-2406-5-**
580-2400-9-**
580-2407-8-**
580-2408-0-**
580-2409-3-**
580-2410-2-**
580-2411-5-**
580-2412-8-**
580-2413-0-**
580-2414-3-**
580-2415-6-**
580-2417-1-**
580-2418-4-**
580-2419-7-**
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
45
51
57
61
71
16
16
16
16
16
16
16
16
24
24
24
24
24
24
24
24
24
32
32
44
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
28.4
28.4
40.4
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
14.2
14.2
20.2
5.6
6.2
6.8
7.4
8.0
8.6
9.2
9.8
10.4
11.0
11.6
12.2
12.8
13.4
14.0
15.2
17.0
18.8
20.0
23.0
17.4
17.4
17.4
17.4
17.4
17.4
17.4
17.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
33.4
33.4
45.4
21.4
21.4
21.4
21.4
21.4
21.4
21.4
21.4
29.4
29.4
29.4
29.4
29.4
29.4
29.4
29.4
29.4
37.4
37.4
49.4
ꢀRecommended Temperature Profile
HRS test conditions
Solder method
Environment
MAX 250ç
:Reflow, IR/hot air
:Room air
250
200
150
100
50
230ç
Solder composition :Paste, 96.5ꢀSn/3.0ꢀAg/0.5ꢀCu
(Senju Metal Industry, Co., Ltd.'s
200ç
Part Number: M705-221CM5-32-10.5)
Test board
:
Glass epoxy 25mm 0.8mm thick
∞
50mm
∞
Land dimensions
Metal mask
:0.3mm 0.65mm, 0.3mm∞0.8mm
∞
:0.23
0.23
∞
0.55
∞
0.1mm thick,
0.1mm thick
150ç
∞0.65
∞
(ç)
The temperature profiles are based on the above conditions.
In individual applications the actual temperature may vary,
depending on solder paste type, volume/thickness and board
size/thickness. Consult your solder paste and equipment
manufacturer for specific recommendations.
25ç
(60sec.)
90 sec. to 120 sec.
Preheating
(60sec.)
Soldering
0
Start
60
120
Time (Seconds)
7
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH26 Seriesꢁ0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors
ꢀOperation and Precautions
Operation
1.FPC insertion procedure. Connector installed on the board.
1
Lift up the actuator. Use thumb or index finger.
2
Fully insert the FPC in the connector parallel to
mounting surface, with the exposed conductive
traces facing down.
FPC conductor
surface (Bottom side)
3
Rotate down the actuator until firmly closed. It is
critical that the inserted FPC is not moved and
remains fully inserted.
2.FPC removal
1
Lift up the actuator. Carefully withdraw the
FPC.
8
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH26 Seriesꢁ0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors
Precautions
Exercise care when handling connectors. Follow recommendations given below.
PC board flexing
SPC board connector mounting area
The connectors are straight within 0.1 mm max.
Make sure that the PC board connector mounting area flatness can accept the connector terminals without
causing any failure of the solder joints.
SHandling before mounting on PCB
Insertion of the FPC or operation of the actuator prior to mounting on the PCB is NOT RECOMMENDED.
SPC Board handling
Exercise caution when handling boards with the connectors installed. Do not apply any forces affecting
soldered joints.
Connector
PCB
Precautions When Inserting or Coupling FPC
Pay attention to the following points when inserting FPC.
SActuator operation
Do not apply excessive force when opening the actuator prior to FPC insertion. When opening make sure
that the force is applied only to the actuator itself, avoiding touching of the contacts.
1
Actuator
Damage to the contacts
Damage
Axis of rotation
2
Axis of rotation
Assure free rotation of
the actuator
9
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH26 Seriesꢁ0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors
Precautions
135˚
3
The actuator will rotate 135 degrees
maximum. Do not apply force to rotate
further. (1N max.)
4
When operating the actuator, do so at the
center portion.
5 As illustrated, do not attempt removal or re-
positioning of the actuator.
SFPC Insertionq
The FPC should be aligned parallel with the board surface and perpendicular with the connector (as
shown), then completely inserted.
Perpendicular with
the connector
To assure correct electrical and mechanical connection do not insert FPC at angle. It must be fully inserted.
Make sure that the FPC is NOT MOVED during the closing of the actuator.
10
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH26 Seriesꢁ0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors
Precautions
SFPC Insertionw
Do not insert the FPC at any angle from above.
As illustrated, angle insertion may cause electrical discontinuity when the FPC is deflected in use.
*To avert insertion of the FPC on an angle, consideration should be given to securing FPC insertion space
at the time of board layout. Insertion will be difficult when the FPC is too short.
*Contact the FPC manufacturer for information about the bending specifications.
SVerification of the fully closed actuator.
The actuator should be fully closed (as illustrated) and the FPC held firmly in the connector.
Do not press against the actuator when is fully closed. Max force applied to the fully closed actuator should
not exceed 1 N.
Routing the FPC (FPC fully inserted/ actuator closed)
SFPC Load
Do not apply force in excess of 0.05N/pin max. in the upward direction (as illustrated). Do not bend the
FPC too close to the actuator.
Load: 0.05N/pin max.
11
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH26 Seriesꢁ0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors
Precautions
Removing the FPC
Rotate the actuator to the open position (maximum open angle of 135°). Carefully withdraw the FPC.
135˚
Other Precautions
SHand Soldering Precautions
When hand soldering:
1
2
3
Do not perform reflow or hand soldering with the FPC inserted in the connector.
Do not apply excessive heat or touch the soldering iron anywhere other than the connector leads.
Do not use excessive amount of solder or flux compounds.
Operation of the actuator and contacts may be affected by excessive amounts of solder or flux
compounds.
®
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: 81-3-3491-5300, FAX: 81-3-3495-5230
http://www.hirose.com
http://www.hirose-connectors.com
The contents of this catalog are current as of date of 09/2010. Contents are subject to change without notice for the purpose of improvements.
12
相关型号：
FH27-10S-0.4-SH
Card Edge Connector, 10 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal
HRS
FH27-10S-0.4SH
0.4 mm Contact Pitch, 1.2 mm above the board, Flexible Printed Circuit ZIF Connectors
HRS
FH27-10S-0.4SH(05)
Card Edge Connector, 10 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal
HRS
FH27-10S-0.4SH(15)
Card Edge Connector, 10 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal
HRS
FH27-10S-0.4SH(51)
Card Edge Connector, 10 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal
HRS
FH27-10S-0.4SH(61)
Card Edge Connector, 10 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal
HRS
FH27-40S-0.4-SH
Card Edge Connector, 40 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal
HRS
FH27-40S-0.4-SH(05)
Card Edge Connector, 40 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal
HRS
FH27-40S-0.4SH
0.4 mm Contact Pitch, 1.2 mm above the board, Flexible Printed Circuit ZIF Connectors
HRS
©2020 ICPDF网 联系我们和版权申明