FH27-50S-0.4SH [HRS]
50 CONTACT(S), FEMALE, RIGHT ANGLE FFC/FPC CONNECTOR, SURFACE MOUNT;型号: | FH27-50S-0.4SH |
厂家: | HRS |
描述: | 50 CONTACT(S), FEMALE, RIGHT ANGLE FFC/FPC CONNECTOR, SURFACE MOUNT PC 连接器 |
文件: | 总8页 (文件大小:327K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
NEW
0.4 mm Contact Pitch, 1.2 mm above the board, Flexible Printed Circuit ZIF Connectors
FH 27 Series
ꢀ
FPC thickness: 0.2 0.03 mm
ꢀ
1.2 mm Height, actuator fully closed.
(54 pos. shown)
1.2mm
4.0mm
ꢀOverview
Continuous miniaturization of personal mobile devices
created a need for a low profile, high density interconnection
system.In the same time, the demand for higher currents and
higher reliability Flexible Printed Circuits has also increased.
Hirose meets all these challenges with introduction of this connector.
24.2mm
ꢀ
FPC temporary retention
ꢀFeatures
1. Low profile, small PCB mounting area, weight reduction
Protruding only 1.2 mm above the board the connector
occupies 50% less area than comparable type having
contacts spaced on 0.5 mm centers.
Creative design, coupled with high manufacturing capabilities
resulted in extremely low weight of the connector.
FPC temporary
hold protrusion
2. Higher current carrying capacity
Contact spacing of 0.4 mm allows production of wider
and simpler pattern of conductive traces on FPC.
FPC notch
3. FPC temporary hold and verification of correct insertion
The connector has built-in FPC hold protrusions allowing
the tactile feel of the correct FPC insertion and holding it
in position before closing of the actuator.
Temporary hold-FPC
fully inserted
4. Uses standard 0.2 mm thick FPC
5. One-finger operation of the actuator
ꢀWider FPC conductive traces
Proven (in several other Hirose's connectors!) Flip-Lock
rotating actuator assures reliable mechanical and electrical
connection with FPC, confirming it with a definite tactile feel.
0.4mm
0.3mm
0.27mm
0.1mm
6. Board placement with automatic equipment
Flat top surface and packaging on the tape-and reel
allows the use of vacuum nozzles.
Standard reel contains 2,500 connectors.
7. Environmental considerations
The center cores of the embossed tape reels are made of Styrofoam.
8. Variety of contact positions
0.4 mm pitch FPC
0.3 mm pitch FPC
Available with 10, 40, 50,54, 57 and 60 pos.
Metal fittings on each
side do not protrude
out allowing side-by-
side mounting of the
connectors or closer
component placement.
ꢀApplications
Mobile phones, PDA’s, digital cameras, digital video
cameras, LCD connections, plasma displays (PDP), camera
modules and other compact devices requiring Flexible
Printed Circuit connections using high reliability ultra-small
profile connectors
Metal
fitting
2006.1
1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ꢀProduct Specifications
Operating temperature range
-55ç to +85ç (Note 1)
Operating humidity range
Storage temperature range
-10ç to +50ç (Note 2)
Storage humidity range
Rated current 0.4 A DC
Rated voltage 40 V AC
Rating
Relative humidity 90% max. (No condensation) Relative humidity 90% max.
Recommended FPC Thickness: = 0.2 0.03mm tin-lead plated (Note 3)
Item
Specification
Conditions
1. Insulation resistance 500 M ø min.
100 V DC
2. Withstanding voltage No flashover or insulation breakdown.
120 V AC /one minute
1 mA
3. Contact resistance
100 m ohms max.
* Including FPC conductor resistance
Contact resistance: 100 m ø max.
4. Durability
20 cycles
(insertion/ withdrawal) No damage, cracks, or parts dislocation.
No electrical discontinuity of 1 µs or more.
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 10 cycle in
each of the 3 directions.
5. Vibration
Contact resistance: 100 m ø max.
No damage, cracks, or parts dislocation.
No electrical discontinuity of 1 µs. min.
Contact resistance: 100 m ø max.
No damage, cracks, or parts dislocation.
Contact resistance: 100 m ø max.
Insulation resistance: 50 M ø min.
No damage, cracks, or parts dislocation.
Contact resistance: 100 m ø max.
Insulation resistance: 50 M ø min.
No damage, cracks, or parts dislocation.
Acceleration of 981 m/s2, 6ms duration, sine half-wave
waveform, 3 cycles / each of 3 axis
6. Shock
7. Humidity
96 hours at temperature of 40ç and humidity of 90% to 95%.RH
(Steady state)
Temperature: -55ç / +15ç to +35ç / +85ç / +15ç to +35ç
8. Temperature cycle
Time: 30 / 2 to 3 / 30 / 2 to 3 (Minutes)
5 cycles
9. Resistance to
soldering heat
Reflow: At the recommended temperature profile
Manual soldering: 350ç 10ç for 5 seconds
No deformation of components affecting performance.
Note 1: Includes temperature rise caused by current flow.
Note 2: The term ”storage” refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation.
Note 3: When using FPC with gold plated contact pads the connector contacts must be also gold plated.
ꢀMaterials
Part
Material
Finish
Remarks
UL94V-0
Insulator
Actuator
LCP
Color: Black
Color: Brown
LCP
Contacts
Phosphor bronze
Phosphor bronze
Tin-lead plated (Note 3)
Tin plated
---------------
---------------
Metal fittings
ꢀOrdering information
-
-
FH27 54S 0.4 SH (05)
1
2
3
4
5
Series name: FH27
No. of contacts
Terminal type
1
2
4
5
SH: SMT horizontal mounting type
Number of contacts: 10, 40, 50, 54, 57, 60
Contact pitch: 0.4 mm
Plating code
(05): Gold plated(40,50,60contacts)
(15): Gold plated(10,54,57contacts)
(51): Tin-lead plated(40,50,60contacts)
(61): Tin-lead plated(10,54,57contacts)
3
2
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
BOperation and Precautions
Operation
Precautions
Do not apply excessive force or use any type of tool to operate the
actuator.
1.FPC insertion procedure. Connector installed on
the board.
1
2
3
1) Lift up the actuator. Use thumb or index finger.
1
Fully insert the FPC in the connector parallel to mounting surface, with
the exposed conductive traces facing down.
The connector will assure reliable performance when the actuator is
open to 130˚maximum. Do not exceed this angle, as this may cause
permanent damage to the connector.
2
Over 130°
FPC conductor
surface
(Bottom side)
Rotate down the actuator until firmly closed. It is critical that the
inserted FPC is not moved and remains fully inserted.
Exercise caution when applying upward force to the connected FPC.
3
2.FPC removal
Lift up the actuator.
1
Carefully withdraw the FPC.
3
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ꢀConnector Dimension
A
B
H
0.4
(0.15)
0.15 H
A**
Polarizing mark indicator
4
Number of contacts indicator
0
0
K
(0.15)
(1.7)
0.15MAX
0.15MAX
1
2
1
2
3
(C: FPC insertion slot dimension)
D
Notes
The coplanarity of each terminal lead is within 0.1.
1
2
3
The contact terminal lead position indicates the dimension from the K surface, the bottom surface of the insulator body.
Slight variations in color of the plastic compounds do not affect form, fit or function of the connector.
Some versions may have material removed from this area. No affect on form, fit or function of the connector.
4
Unit: mm
Part Number
CL No.
Number of Contacts
A
B
C
D
FH27-10S-0.4SH
FH27-40S-0.4SH
FH27-50S-0.4SH
FH27-54S-0.4SH
FH27-57S-0.4SH
FH27-60S-0.4SH
CL580-0004-0
CL580-0005-3
CL580-0010-3
CL580-0001-2
CL580-0003-8
CL580-0006-6
10
40
50
54
57
60
06.6
18.6
22.6
24.2
25.4
26.6
03.6
15.6
19.6
21.2
22.4
23.6
05.24
17.24
21.24
22.84
24.04
25.24
06.0
18.0
22.0
23.6
24.8
26.0
Tape and reel packaging (2,500 pieces/reel).
Order by number of reels.
4
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
BRecommended PCB mounting pattern and metal mask dimensions
E
R
∞Number of contacts
0.23 0.03(Land)
0.04 R
0.4
0.2 0.01(Metal mask)
Recommended metal mask thickness: .t=0.12
(0.225)
Outline of the connector
(0.175)
0.55 0.05
F
0.05
0.55 0.05
BRecommended FPC Dimensions
G
E
0.05
0.03
0.8 0.07
0.8 0.07
0.27 0.03
0.13 0.03
0.4 0.03
0.2 0.03
R0.2MAX
2-R0.25MAX
(0.07)
Covering film layer
(0.07)
H
G
0.05
0.05
Polyamide and thermally hardening adhesive is recommended as the materials for the stiffener.
Overlap between covering film layer and stiffener is 0.5mm min.
1
2
Unit: mm
Part Number
FH27-10S-0.4SH
FH27-40S-0.4SH
FH27-50S-0.4SH
FH27-54S-0.4SH
FH27-57S-0.4SH
FH27-60S-0.4SH
CL No.
Number of Contacts
E
F
G
H
CL580-0004-0
CL580-0005-3
CL580-0010-3
CL580-0001-2
CL580-0003-8
CL580-0006-6
10
40
50
54
57
60
03.6
15.6
19.6
21.2
22.4
23.6
05.5
17.5
21.5
23.1
24.3
25.5
05.2
17.2
21.2
22.8
24.0
25.2
04.01
16.01
20.01
21.61
22.81
24.01
Tape and tape reel packaging (2,500 pieces/reel).
Order by number of reels.
5
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
BPackaging Specification
Embossed Carrier Tape Dimensions
ꢀ
Tape width up to 24mm .
ꢀ
Tape width 32mm and over.
ꢀ
2
0.15
12 0.1
4
0.1
(2)
(0.3)
2
0.15
24 00.1.11
(2)
(0.3)
(4.2)
(5.2)
Unreeling direction
(4.2)
(5.2)
1.5+0.1
Unreeling direction
0
Reel Dimensions
ꢀ
(2)
(Q)
End portion
Mounting portion
Lead portion (400mm min.)
Embossed carrier tape
Top cover tape
No connector inserted
No connector inserted
(10 pockets min.)
(10 pockets min.)
Unit: mm
Q
L
M
N
P
Part Number
CL No.
Number of Contacts
FH27-10S-0.4SH
FH27-40S-0.4SH
FH27-50S-0.4SH
FH27-54S-0.4SH
FH27-57S-0.4SH
FH27-60S-0.4SH
CL580-0004-0
CL580-0005-3
CL580-0010-3
CL580-0001-2
CL580-0003-8
CL580-0006-6
10
40
50
54
57
60
16.0
32.0
44.0
44.0
44.0
44.0
-------
28.4
40.4
40.4
40.4
40.4
07.5
14.2
20.2
20.2
20.2
20.2
06.9
18.9
22.9
24.5
25.7
26.9
16.5
32.5
44.5
44.5
44.5
44.5
2,500 pieces per reel.
6
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
BRecommended Temperature Profile
Using Typical Solder Paste
ꢀ
5 sec. max.
240ç
250
200
150
100
50
HRS test conditions
Solder method
:Reflow, IR/hot air
200ç
(Nihon Den-netsu Co., Ltd.’s Part Number:
SENSBY NR-2)
Environment
:Room air
160ç
Solder composition :Paste, 63%Sn/37%Pb
(Senju Metal Industry, Co., Ltd.’s Part Number:
150ç
OZ63-201C-50-9)
Test board
Metal mask
:Glass epoxy 45mm∞100mm∞1.6mm thick
Land dimensions:0.23mm∞0.8mm
:0.2∞0.8∞0.12mm thick
(30 sec.)
25ç
(60sec.) 60 sec. to 90 sec.
Preheating
(20 sec. to 30 sec.)
0
Soldering
Start
Time (Seconds)
Using Lead-free Solder Paste
ꢀ
MAX 250ç
HRS test condition
Solder method
250
200
150
100
50
:Reflow, IR/hot air
230ç
(Nihon Den-netsu Co., Ltd.’s Part Number:
SENSBY NR-2)
200ç
Environment
:Room air
Solder composition :Paste, 96.5%Sn/3.0%Ag/0.5%Cu
(Senju Metal Industry, Co., Ltd.’s Part Number:
150ç
M705-221CM5-42-10.5)
Test board
Metal mask
:Glass epoxy 45mm∞100mm∞1.6mm thick
Land dimensions:0.23mm∞0.8mm
:0.2∞0.8∞0.12mm thick
25ç
The temperature profiles shown are based on the above conditions.
In individual applications the actual temperature may vary,
depending on solder paste type, volume / thickness and board size
/ thickness. Consult your solder paste and equipment manufacturer
for specific recommendations.
(60sec.) 90 sec. to 120 sec.
Preheating
(60 sec.)
Soldering
0
Start
Time (Seconds)
7
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
BFPC Construction (Recommended Specifications)
1. Using Single-sided FPC
Material Name
Covering layer film
Cover adhesive
Surface treatment
Copper foil
Material
Thickness (µm)
Top side
Polyamide 1 mil thick.
25
25
5
Tin-lead plated
Cu
1/2oz
35
25
25
30
75
195
Base adhesive
Base film
Polyamide 1 mil thick
Reinforcement material adhesive Thermosetting adhesive
Stiffener
Polyamide 3 mil thick
Total
Bottom side
2. Using Double-sided FPC
Material Name
Material
Thickness (µm)
Top side
Covering layer film
Cover adhesive
Surface treatment
Through-hole copper
Copper foil
Polyamide 1 mil thick
25
25
5
Tin-lead plated
Cu
15
18
18
25
18
18
25
25
25
25
199
Cu
1/2oz
Base adhesive
Base film
Polyamide 1 mil thick
Base adhesive
Copper foil
Cu
1/2oz
Cover adhesive
Covering layer film
Polyamide 1 mil thick
Reinforcement material adhesive Thermosetting adhesive
Stiffener
Polyamide 1 mil thick
Total
Bottom side
To prevent release of the lock due to FPC bending, use of the FPC with copper foil on bottom side is not recommended.
®
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933
http://www.hirose.com
http://www.hirose-connectors.com
The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.
8
相关型号:
FH27-54S-0.4-SH
Card Edge Connector, 54 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal
HRS
FH27-54S-0.4SH
0.4 mm Contact Pitch, 1.2 mm above the board, Flexible Printed Circuit ZIF Connectors
HRS
FH27-54S-0.4SH(05)
Card Edge Connector, 54 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal
HRS
FH27-54S-0.4SH(15)
Card Edge Connector, 54 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal
HRS
FH27-54S-0.4SH(51)
Card Edge Connector, 54 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal
HRS
FH27-54S-0.4SH(61)
Card Edge Connector, 54 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal
HRS
FH27-57S-0.4-SH
Card Edge Connector, 57 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal
HRS
©2020 ICPDF网 联系我们和版权申明