FH33-20S-0.5SH(10) [HRS]
Card Edge Connector, 20 Contact(s), 1 Row(s), Female, Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Locking, ROHS COMPLIANT;
| 型号： | FH33-20S-0.5SH(10) |
| 厂家： | 
HRS |
| 描述： | Card Edge Connector, 20 Contact(s), 1 Row(s), Female, Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Locking, ROHS COMPLIANT PC 连接器 |
| 文件： | 总12页 (文件大小：408K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
0.5 mm Pitch, 1.2 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
FH33 Series
Increased FPC retention force
Small size
●
2.5mm
[
]
30 pos.
Metal fittings (Leadless)
■Features
Can be mounted over conductive traces.
●
1. Low-profile, small PCB mounting area
Narrow width of only 2.5 mm reduced the board footprint
by approximately 17% to 57%, as compared to several
similar FH Series HRS connectors.
2. Increased FPC/FFC retention force
_ In the horizontal direction: Approximately 2.0 times
No exposed contacts on the bottom of the connector
Simple operation
●
(compared to similar FH Series HRS connectors)
_ In the vertical direction: Approximately 1.7 times
(compared to similar FH Series HRS connectors)
3. Conductive traces on the PCB can run
under the connector
1 Open the actuator
2 Insert FPC
No exposed contacts on the bottom of the connector.
4. One finger operation of the actuator
Actuator
1
Proven (in several other Hirose’s connectors) Flip-Lock®
rotating actuator assures reliable mechanical and
electrical connection with FPC/FFC, confirming it with a
definite tactile feel.
5. Easy FPC/FFC insertion
FPC/FFC is self-guided in the connector assuring correct and
reliable electrical and mechanical connection.
2
6. Accepts 0.3 mm thick FPC, FFC
FPC
Increased rigidity 0.3 mm thick FPC / FFC is reliably
inserted and terminated.
7. Board placement with automatic equipment
Locked condition
●
Flat top surface and packaging on the tape-and-reel
3 Close the actuator
4 FPC connected
allows use of vacuum nozzles.
Standard reel contains 5,000 connectors.
■Applications
3
Notebook computers, digital cameras, LCD connections,
plasma displays, Digital Video Cameras, Portable Digital
Assistants and other compact devices requiring Flexible
Printed Circuit Connections using high reliability ZIF
connectors.
3
4
20087.4
1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FH33 Series●0.5 mm Pitch, 1.2 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
■Product Specifications
Operating temperature range -55 ç to +85ç (Note 1)
Operating humidity range
Storage temperature range -10ç to +50ç (Note 2)
Relative humidity 90% max. Storage humidity range Relative humidity 90% max.
Current rating
Voltage rating
0.5 A
50 V AC
Ratings
(No condensation)
(No condensation)
Recommended FPC
Thickness = 0.3 0.05mm gold plated (under 30 pos.), 0.3 0.03mm gold plated (over 31 pos.)
Specification Conditions
Item
1. Insulation resistance
2. Withstanding voltage
500 Mø min.
100 V DC
No flashover or insulation breakdown.
150 V AC /one minute
50 mø max.
* Including FPC conductor resistance
3. Contact resistance
1 mA
Contact resistance: 50 mø max.
No damage, cracks, or parts dislocation.
4. Durability
(insertion/ withdrawal)
20 cycles
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 10 cycles in
each of the 3 directions.
5. Vibration
6. Shock
No electrical discontinuity of 1μs or more.
Contact resistance: 50 mø max.
No damage, cracks, or parts dislocation.
2
Acceleration of 981 m/s , 6 ms duration, sine half-wave waveform,
3 cycles in each of the 3 axis
7. Humidity
96 hours at 40ç and humidity of 90% to 95%.
(Steady state)
Contact resistance: 50 mø max.
Insulation resistance: 50 Mø min.
No damage, cracks, or parts dislocation.
+
+
+
+
+
Temperature : -55ç/ 15ç to 35ç/ 85ç/ 15ç to 35ç
8. Temperature cycle
Time
: 30 / 2 to 3 / 30 / 2 to 3 (Minutes)
5 cycles
Reflow
: At the recommended temperature profile
9. Resistance to
soldering heat
No deformation of components affecting performance.
Manual soldering: 350ç 10ç for 5 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term ”storage” refers to products stored for long period of time prior to mounting and use. Operating Temperature Range
and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation.
■Materials
Part
Material
Finish
Remarks
UL94V-0
Insulator
Actuator
Color : Beige
Polyamide
Color : Dark brown
Gold flash plated
Contacts
Metal fittings
---------------
---------------
Phosphor bronze
Pure tin reflow plated
■Ordering information
FH33 - 28S - 0.5 SH (10)
2
1
3
4
5
Series name: FH33
No. of contacts
Termination type
1
2
4
5
SH : SMT horizontal
Number of contacts: 6, 9, 10, 12, 14, 19, 20, 26, 28,
30, 32, 36, 40, 45
Blank : Gold flash plated (RoSH compliant)
(10) : Nickel barrier gold flash plated (RoHS compliant)
Contact pitch: 0.5 mm
3
2
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FH33 Series●0.5 mm Pitch, 1.2 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
■Connector Dimensions
A
0.15
B
G
Lot No. indicator
∞Number of contacts
0.15 G
(0.15)
0.5
A**
Polarizing mark indicator
Number of contacts indicator
(0.15)
F
(C: FPC insertion slot dimension)
0.1
D
F
0
0
0.5 0.1
0.55 0.1
a
1
2
0.15MAX
(1.1)
0.25 0.1
0.15MAX
1
2
1.73 0.2
2.2 0.15
+0.15
0.3
3
–0.1
Notes
1
2
3
4
The coplanarity of each terminal lead is within 0.1 max.
The contact terminal lead position indicates the dimension from the bottom a surface of the insulator body.
Difference of each terminal lead is within 0.1 max.
Slight variations in color of the plastic compounds do not affect form, fit or function of the connector.
Unit: mm
RoHS
A
Part Number
CL No.
Number of Contacts
B
C
D
FH33-06S-0.5SH (**)
FH33-09S-0.5SH (**)
FH33-10S-0.5SH (**)
FH33-12S-0.5SH (**)
FH33-14S-0.5SH (**)
FH33-19S-0.5SH (**)
FH33-20S-0.5SH (**)
FH33-26S-0.5SH (**)
FH33-28S-0.5SH (**)
FH33-30S-0.5SH (**)
FH33-32S-0.5SH (**)
FH33-36S-0.5SH (**)
FH33-40S-0.5SH (**)
FH33-45S-0.5SH (**)
580-1301-1-**
580-1303-7-**
580-1304-0-**
580-1302-4-**
580-1305-2-**
580-1307-8-**
580-1317-1-**
580-1306-5-**
580-1300-9-**
580-1312-8-**
580-1310-2-**
580-1311-5-**
580-1308-0-**
580-1316-9-**
6
05.0
06.5
07.0
08.0
09.0
11.5
12.0
15.0
16.0
17.0
18.0
20.0
22.0
24.5
02.5
04.0
04.5
05.5
06.5
09.0
09.5
12.5
13.5
14.5
15.5
17.5
19.5
22.0
03.57
05.07
05.57
06.57
07.57
10.07
10.57
13.57
14.57
15.57
16.57
18.57
20.57
23.07
04.35
05.85
06.35
07.35
08.35
10.85
11.35
14.35
15.35
16.35
17.35
19.35
21.35
23.85
9
10
12
14
19
20
26
28
30
32
36
40
45
YES
(Note 1)
Note 1: (**) : Plating specification. Refer to ordering information.
Note 2: Tape-and-reel packaging (5,000 pieces/reel).
Order by number of reels.
3
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FH33 Series●0.5 mm Pitch, 1.2 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
BRecommended PCB mounting pattern and metal mask dimensions
B
H
∞Number of contacts
0.3 0.05(Land)
0.5
0.1 H
0.25 0.05(Metal mask)
(0.2)
J
0.1
(0.2)
K
0.1
(A)
BRecommended FPC dimensions
L
0.05
0.03
0.5 0.07
B
0.5 0.03
0.35 0.03(FPC)
0.3 0.03(FFC)
<under 30 pos.>0.3 0.05
<over 31 pos.>0.3 0.03
Note 1: Polyimide and a thermally hardened adhesive is recommended as the materials for the stiffener.
Note 2: If the stiffener is less than 3.3 mm, E dimension must be 0.5 mm min.
Unit: mm
L
Part Number
CL No.
Number of Contacts
A
B
J
K
FH33-06S-0.5SH (**)
FH33-09S-0.5SH (**)
FH33-10S-0.5SH (**)
FH33-12S-0.5SH (**)
FH33-14S-0.5SH (**)
FH33-19S-0.5SH (**)
FH33-20S-0.5SH (**)
FH33-26S-0.5SH (**)
FH33-28S-0.5SH (**)
FH33-30S-0.5SH (**)
FH33-32S-0.5SH (**)
FH33-36S-0.5SH (**)
FH33-40S-0.5SH (**)
FH33-45S-0.5SH (**)
580-1301-1-**
580-1303-7-**
580-1304-0-**
580-1302-4-**
580-1305-2-**
580-1307-8-**
580-1317-1-**
580-1306-5-**
580-1300-9-**
580-1312-8-**
580-1310-2-**
580-1311-5-**
580-1308-0-**
580-1316-9-**
6
5.0
2.5
03.8
05.3
05.8
06.8
07.8
10.3
10.8
13.8
14.8
15.8
16.8
18.8
20.8
23.3
04.9
06.4
06.9
07.9
08.9
11.4
11.9
14.9
15.9
16.9
17.9
19.9
21.9
24.4
03.5
05.0
05.5
06.5
07.5
10.0
10.5
13.5
14.5
15.5
16.5
18.5
20.5
23.0
9
6.5
4.0
10
12
14
19
20
26
28
30
32
36
40
45
7.0
4.5
8.0
5.5
9.0
6.5
11.5
12.0
15.0
16.0
17.0
18.0
20.0
22.0
24.5
9.0
9.5
12.5
13.5
14.5
15.5
17.5
19.5
22.0
4
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FH33 Series●0.5 mm Pitch, 1.2 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
BPackaging Specifications
Embossed Carrier Tape Dimensions (Tape width up to 24mm)
●
4
0.1 2 0.15
8
0.1
(1.7)
(0.3)
(3)
(3.8)
Flat surface for placement
with automatic equipment
(1)
Unreeling direction
Embossed Carrier Tape Dimensions (Tape width 32mm and over)
●
4
0.1 2 0.15
8
0.1
(1.7)
(0.3)
1.5+0.1
(3)
(3.8)
0
(1)
Flat surface for placement
with automatic equipment
Unreeling direction
Unit: mm
S
Part Number
CL No.
Number of Contacts
M
N
P
Q
R
FH33-06S-0.5SH (**)
FH33-09S-0.5SH (**)
FH33-10S-0.5SH (**)
FH33-12S-0.5SH (**)
FH33-14S-0.5SH (**)
FH33-19S-0.5SH (**)
FH33-20S-0.5SH (**)
FH33-26S-0.5SH (**)
FH33-28S-0.5SH (**)
FH33-30S-0.5SH (**)
FH33-32S-0.5SH (**)
FH33-36S-0.5SH (**)
FH33-40S-0.5SH (**)
FH33-45S-0.5SH (**)
580-1301-1-**
580-1303-7-**
580-1304-0-**
580-1302-4-**
580-1305-2-**
580-1307-8-**
580-1317-1-**
580-1306-5-**
580-1300-9-**
580-1312-8-**
580-1310-2-**
580-1311-5-**
580-1308-0-**
580-1316-9-**
6
16
16
16
16
16
24
24
24
24
24
32
32
44
44
7.5
7.5
------------
------------
------------
------------
------------
------------
------------
------------
------------
------------
28.4
05.3
06.8
07.3
08.3
09.3
11.8
12.3
15.3
16.3
17.3
18.3
20.3
22.3
24.8
17.4
17.4
17.4
17.4
17.4
25.4
25.4
25.4
25.4
25.4
33.4
33.4
45.4
45.4
21.4
21.4
21.4
21.4
21.4
29.4
29.4
29.4
29.4
29.4
37.4
37.4
49.4
49.4
9
10
12
14
19
20
26
28
30
32
36
40
45
7.5
7.5
7.5
11.5
11.5
11.5
11.5
11.5
14.2
14.2
20.2
20.2
28.4
40.4
40.4
5
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FH33 Series●0.5 mm Pitch, 1.2 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
Reel Dimensions
●
(R:INSIDE)
(S:OUTSIDE)
End section
Mounting section
Lead section (400 mm min.)
Embossed carrier tape
Blank section
Blank section
Top cover tape
(10 pockets min.)
(10 pockets min.)
Note: 5,000 pieces per reel.
Embossed tape 32 mm or wider will have perforated feed holes on two sides.
6
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FH33 Series●0.5 mm Pitch, 1.2 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
BRecommended Temperature Profile
Using Lead-free Solder paste
●
HRS test conditions
MAX 250ç
Solder method : Reflow, IR/hot air
(Nihon Den-netsu Co., Ltd.’s Part Number: SENSBY NR-2)
250
200
Environment : Room air
230ç
Solder composition : Paste, 96.5%Sn/3.0%Ag/0.5%Cu
200ç
(Senju Metal Industry, Co., Ltd.’s Part Number: M705-GRN360-K2-V)
Test board
: Glass epoxy 25mm∞50mm∞0.8mm thick
Land dimensions : Contacts lead 0.3mm∞0.65mm
Metal fittings 0.55mm∞0.8mm
150
150ç
(ç)
Metal mask
: Contacts lead 0.25mm∞0.65mm∞0.1mm thick
Metal fittings 0.55mm∞0.8mm∞0.1mm thick
100
50
0
This temperature profile is based on the above conditions.
In individual applications the actual temperature may vary,
depending on solder paste type, volume/thickness and board
size/thickness. Consult your solder paste and equipment
manufacturer for specific recommendations.
25ç
(60 sec.)
90 to 120 sec.
Preheating
(60 sec.)
Sodering
Start
Time (Seconds)
7
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FH33 Series●0.5 mm Pitch, 1.2 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
BFH33 Series FPC/FFC Construction (Recommended Specifications)
1. Using Single-sided FPC
Material Name
Material
Thickness (μm)
Covering film layer
Cover adhesive
Polyimide 1 mil thick
25
25
Nickel under plated 1 to 5μm /
Gold plated 0.2μm
Surface treatment
3
Copper foil
Base adhesive
Base film
Cu
1oz
35
25
Polyimide 1 mil thick
25
Reinforcement material adhesive Heat-hardened adhesive
30
Stiffener
Polyimide 7 mil thick
Total
175
293
2. Using Double-sided FPC
Material Name
Material
Thickness (μm)
Covering film layer
Cover adhesive
Polyimide 1 mil thick
25
25
Nickel under plated 1 to 5μm /
Gold plated 0.2μm
Surface treatment
3
Through-hole copper
Copper foil
Cu
15
18
Cu
Polyimide 1 mil thick
Cu 1/2oz
Polyimide 1 mil thick
1/2oz
Base adhesive
Base film
18
25
Base adhesive
Copper foil
18
18
Cover adhesive
Covering film layer
25
25
Reinforcement material adhesive Heat-hardened adhesive
50
Stiffener
Polyimide 4 mil thick
Total
100
297
3. Using FFC
Material Name
Material
polyester thermoplastic type
Polyester
Thickness (μm)
Polyester film
Adhesive
12
30
Gold plated, soft copper film
Adhesive
35
30
Polyester
12
Polyester
Polyester
Total
30
Adhesive
Stiffener
188
295
π Practical tolerance of thickness dimension is 20 μm
●To prevent release of the FPC due to it's bending, use of double sided FPC with copper foil on the back side is NOT RECOMMENDED.
8
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FH33 Series●0.5 mm Pitch, 1.2 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
BOperation and Precautions
Operation
1.FPC insertion procedure. Connector installed on the board.
1 Lift up the actuator. Use thumb or index finger.
2 Fully insert the FPC in the connector parallel to
mounting surface, with the exposed conductive
traces facing down.
FPC conductor
surface (Bottom side)
3 Rotate down the actuator until firmly closed. It is
critical that the inserted FPC is not moved and
remains fully inserted.
2.FPC removal
1 Lift up the actuator. Carefully withdraw the
FPC.
9
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FH33 Series●0.5 mm Pitch, 1.2 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
Precautions
Exercise care when handling connectors. Follow recommendations given below.
PC board flexing
SPC board connector mounting area
The connectors are straight within 0.1 mm max.
Make sure that the PC board connector mounting area flatness can accept the connector terminals without
causing any failure of the solder joints.
SHandling before mounting on PCB
Insertion of the FPC or operation of the actuator prior to mounting on the PCB is NOT RECOMMENDED.
SPC Board handling
Exercise caution when handling boards with the connectors installed. Do not apply any forces affecting
soldered joints.
Connector
PCB
Precautions When Inserting or Removing FPC
Pay attention to the following points when inserting FPC.
SActuator operation
Do not apply excessive force when opening the actuator prior to FPC insertion. When opening make sure
that the force is applied only to the actuator itself, avoiding touching of the contacts.
1
Damege to the contacts
Damage to the contacts
2 Axis of rotation
Axis of rotation
Assure free rotation of
the actuator
3 The actuator will rotate 120 degrees
maximum. Do not force it to rotate further.
10
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FH33 Series●0.5 mm Pitch, 1.2 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
Precautions
4 When operating the actuator, do so at the
center portion.
As illustrated, do not attempt removal or re-
positioning of the actuator.
5
S FPC Insertionq
The FPC should be aligned parallel with the board surface and perpendicular with the connector (as shown),
then completely inserted.
Actuator
Perpendicular with
the connector
FPC
To assure correct electrical and mechanical connection do not insert FPC at angle. It must be fully inserted.
Make sure that the FPC is NOT MOVED during the closing of the actuator.
SFPC Insertionw
When inserting the FPC, do not forcefully rub against the bottom surface of the connector insertion entrance.
Doing so will result in the contacts and FPC making strong contact and may cause deformation of the
contacts, peeling of the FPC conductor, and other problems.
Peeling of FPC
conductor
11
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FH33 Series●0.5 mm Pitch, 1.2 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
Precautions
SVerification of the fully closed actuator.
The actuator should be fully closed (as illustrated) and the FPC held firmly in the connector.
Do not press against the actuator when is fully closed. Max force applied to the fully closed actuator should
not exceed 1 N.
Routing the FPC (FPC fully inserted/ actuator closed)
SFPC Load
Do not apply force in excess of 0.15N max. in the upward direction (as illustrated). Do not bend the FPC
too close to the actuator.
Load: 0.15N max.
Removing the FPC
Rotate the actuator to the open position (maximum open angle of 120°). Carefully withdraw the FPC.
Other Precautions
SHand Soldering Precautions
When hand soldering:
1
2
3
Do not perform reflow or hand soldering with the FPC inserted in the connector.
Do not apply excessive heat or touch the soldering iron anywhere other than the connector leads.
Do not use excessive amount of solder or flux compounds.
Operation of the actuator and contacts may be affected by excessive amounts of solder or flux
compounds.
®
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933
http://www.hirose.com
http://www.hirose-connectors.com
The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.
12
相关型号：
FH33-26S-0.5SH
0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
HRS
FH33-26S-0.5SH(10)
Card Edge Connector, 26 Contact(s), 1 Row(s), Female, Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Locking, ROHS COMPLIANT
HRS
FH33-28S-0.5SH
0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
HRS
FH33-28S-0.5SH(10)
Card Edge Connector, 28 Contact(s), 1 Row(s), Female, Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Locking, ROHS COMPLIANT
HRS
FH33-30S-0.5SH
0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
HRS
FH33-30S-0.5SH(10)
Card Edge Connector, 30 Contact(s), 1 Row(s), Female, Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Locking, ROHS COMPLIANT
HRS
FH33-30S-0.5SH(99)
Card Edge Connector, 30 Contact(s), 1 Row(s), Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Locking
HRS
FH33-32S-0.5SH
0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
HRS
FH33-36S-0.5SH
0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
HRS
FH33-36S-0.5SH(10)
Card Edge Connector, 36 Contact(s), 1 Row(s), Female, Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Locking, ROHS COMPLIANT
HRS
FH33-36S-0.5SH(99)
Card Edge Connector, 36 Contact(s), 1 Row(s), Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Locking
HRS
FH33-40S-0.5SH
0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
HRS
©2020 ICPDF网 联系我们和版权申明