FH33J-18S-0.5SH(99) [HRS]
Card Edge Connector, 18 Contact(s), 1 Row(s), Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Locking;型号: | FH33J-18S-0.5SH(99) |
厂家: | HRS |
描述: | Card Edge Connector, 18 Contact(s), 1 Row(s), Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Locking PC 连接器 |
文件: | 总16页 (文件大小:354K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
FH33 Series
Increased FPC retention force
Small size
●
2.5mm
[
]
30 pos.
Metal fittings (Leadless)
■Features
Can be mounted over conductive traces.
●
1. Low-profile, small PCB mounting area
Narrow width of only 2.5 mm reduced the board
footprint by approximately 17% to 57%, as compared to
several similar FH Series HRS connectors.
2. Various contact pitch (0.4mm, 0.5mm, 1mm
pitch) available
In addition to standard 0.5mm pitch, 0.4mm pitch, 1mm
pitch also available.
3. Increased FPC/FFC retention force
_ In the horizontal direction: Approximately 2.0 times
(compared to 0.5mm pitch FH12 series.)
No exposed contacts on the bottom of the
connector
_ In the vertical direction: Approximately 1.7 times
(compared to 0.5mm pitch FH19 series.)
Simple operation
●
q Open the actuator
w Insert FPC
4. Conductive traces on the PCB can run
under the connector
No exposed contacts on the bottom of the connector.
Actuator
5. One finger operation of the actuator
Proven (in several other Hirose’s connectors) Flip-
Lock® rotating actuator assures reliable mechanical
and electrical connection with FPC/FFC, confirming it
with a definite tactile feel.
1
6. Easy FPC insertion and reliable electrical
connection
2
Proven Flip Lock actuator allows easy insertion of
FPC/FFC and provides a tactile sensation when fully
closed, confirming complete electrical and mechanical
connection.
FPC
7. Accepts standard FPC thickness
0.3mm thick standard Flexible Printed Circuit (FPC) and
Flexible Flat Cable (FFC) can be used.
Locked condition
●
e Close the actuator
r FPC connected
8. Board placement with automatic
equipment
3
Flat upper surface and tape and reel packaging
facilitate vacuum pick-up and placement.
Standard reel packaging contains 5000 connectors.
3
9. Halogen-free*
(FH33J Series)
4
*As defined by IEC61249-2-21
Br-900ppm maximum, Cl-900ppm maximum,
Cl + Br combined-1,500ppm maximum
2013.11w
1
FH33 Series●0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
■Product Specifications
Current rating
(0.4mm pitch type 0.4A)
Voltage rating
(0.4mm pitch type 40V AC)
0.5 A
Operating temperature range -55 ç to +85ç (Note 1)
Storage temperature range -10ç to +50ç (Note 2)
Storage humidity range Relative humidity 90% max. (No
condensation)
Ratings
Operating humidity range
Relative humidity 90% max.
(No condensation)
50 V AC
Recommended FPC
Thickness = 0.3 0.05mm gold plated (under 30 pos.), 0.3 0.03mm gold plated (over 31 pos.)
Specification Conditions
Item
1. Insulation resistance 500 Mø min.
100 V DC
2. Withstanding voltage No flashover or insulation breakdown.
50 mø max.
150 V AC /one minute, 120 V AC /one minute(0.4mm pitch type)
3. Contact resistance
100 mø max(0.4mm pitch type).
1 mA
* Including FPC conductor resistance
Contact resistance: 50 mø max.
100 mø max(0.4mm pitch type). 20 cycles
No damage, cracks, or parts dislocation.
4. Durability
(insertion/ withdrawal)
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 10 cycles
in each of the 3 directions.
No electrical discontinuity of 1μs or more.
Contact resistance: 50 mø max.
100 mø max(0.4mm pitch type).
No damage, cracks, or parts dislocation.
5. Vibration
6. Shock
2
Acceleration of 981 m/s , 6 ms duration, sine half-wave
waveform, 3 cycles in each of the 3 axis
7. Humidity
(Steady state)
96 hours at 40ç and humidity of 90% to 95%.
Contact resistance: 50 mø max.
100 mø max(0.4mm pitch type).
Insulation resistance: 50 Mø min.
+
+
+
+
+
Temperature : -55ç/ 15ç to 35ç/ 85ç/ 15ç to 35ç
8. Temperature cycle
Time
: 30 / 2 to 3 / 30 / 2 to 3 (Minutes)
No damage, cracks, or parts dislocation.
5 cycles
Reflow
: At the recommended temperature profile
9. Resistance to
soldering heat
No deformation of components affecting performance.
Manual soldering: 350ç 10ç for 5 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term ”storage” refers to products stored for long period of time prior to mounting and use. Operating
Temperature Range and Humidity range covers non- conducting condition of installed connectors in storage,
shipment or during transportation.
■Materials
Part
Material
PA
Finish
Color:Beige
Remarks
UL94V-0
FH33 series
FH33J series
FH33M series
Color:Deep brown
Color:Beige
LCP
PPS
LCP
PA
Color:Black
Insulator
Color:Beige
Color:Deep brown
Color:Beige
LCP
PPS
FH33MHJ series
Color:Black
Contacts
Metalfittings
Gold flash plated
Pure tin reflow plated
-----
-----
Phosphor bronze
■Ordering information
( )
( )
FH 33 M H J - 12 6 S B - 1 SH 10
2
1
3
4
5
6
7
8
9
10
11
12
Series name:FH
Series No:33
Blank:Width 3.0mm(standard)
Standard type:Blank
Contact pitch:
1
2
3
4
7
10
H:Width 3.5mm(long actuator type)
Blank:Standard
Eccentric type:Number of
contacts
0.4mm,0.5mm,1mm
Blank:0.5mm pitch,1mm pitch
M:0.4mm pitch
SH:SMT horizontal mounting
Plating specifications:
Blank:Gold plated
5
6
11
12
J:Halogen-free
Contact alignment:S: single
Eccentric direction:
Blank:standard type
B:Eccentric type
8
9
Flame retardance UL94V-0
Standard type:Number of contacts
Eccentric type:Number of contacts
in 1mm housing
(10)...Gold plating with nickel
barrier 5,000pieces/reel
(99)...Gold plating with nickel
barrier 500pieces/reel
2
FH33 Series●0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
■Connector Dimensions
0.4mm pitch, 0.5mm pitch type
●
A
0.15
B
G
Lot No. indicator
∞Number of contacts
0.15 G
(0.15)
T
A**
Polarizing mark indicator
HRS mark
Cav No.
Number of contacts indicator
(0.15)
F
(C: FPC insertion slot dimension)
0.1
D
F
Notes
1
2
The coplanarity of each terminal lead is within 0.1 max.
The contact terminal lead position indicates the dimension
from the bottom a surface of the insulator body.
Difference of each terminal lead is within 0.1 max.
Slight variations in color of the plastic compounds do not
affect form, fit or function of the connector.
3
4
0
0
0.5 0.1
a
1
2
0.15MAX
(1.1)
0.25 0.1
0.55 0.1
0.15MAX
1
2
1.73 0.2
2.2 0.15
+0.15
0.3
3
–0.1
5
After reflow, the terminal plating may change color, however
this does not represent a quality issue.
Unit: mm
A
Part Number
CL No.
Number of Contacts
B
2.5
4
C
D
T
U
FH33-6S-0.5SH (**)
FH33-9S-0.5SH (**)
FH33-10S-0.5SH (**)
FH33-12S-0.5SH (**)
FH33-14S-0.5SH (**)
FH33-19S-0.5SH (**)
FH33-20S-0.5SH (**)
FH33-26S-0.5SH (**)
FH33-28S-0.5SH (**)
FH33-30S-0.5SH (**)
FH33-32S-0.5SH (**)
FH33-36S-0.5SH (**)
FH33-40S-0.5SH (**)
FH33-45S-0.5SH (**)
FH33M-16S-0.4SH (**)
FH33J-4S-0.5SH (**)
FH33J-10S-0.5SH (**)
FH33J-12S-0.5SH (**)
FH33J-16S-0.5SH (**)
FH33J-18S-0.5SH (**)
FH33J-19S-0.5SH (**)
FH33J-40S-0.5SH (**)
FH33MHJ-65S-0.4SH (**)
580-1301-1-**
580-1303-7-**
580-1304-0-**
580-1302-4-**
580-1305-2-**
580-1307-8-**
580-1317-1-**
580-1306-5-**
580-1300-9-**
580-1312-8-**
580-1310-2-**
580-1311-5-**
580-1308-0-**
580-1316-9-**
580-1319-7-**
580-1329-0-**
580-1324-7-**
580-1328-8-**
580-1331-2-**
580-1334-0-**
580-1332-5-**
580-1330-0-**
580-1325-0-**
6
5
6.5
7
3.57
4.35
5.85
6.35
7.35
8.35
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.4
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.4
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.95
9
5.07
10
12
14
19
20
26
28
30
32
36
40
45
16
4
4.5
5.5
6.5
9
5.57
8
6.57
9
7.57
11.5
12
15
16
17
18
20
22
24.5
8.3
4
10.07
10.57
13.57
14.57
15.57
16.57
18.57
20.57
23.07
6.87
10.85
11.35
14.35
15.35
16.35
17.35
19.35
21.35
23.85
7.65
9.5
12.5
13.5
14.5
15.5
17.5
19.5
22
6
1.5
4.5
5.5
7.5
8.5
9
2.57
3.35
10
12
16
18
19
40
65
7
5.57
6.35
8
6.57
7.35
10
11
11.5
22
27.9
8.57
9.35
9.57
10.35
10.85
21.35
27.25
10.07
20.57
26.47
19.5
25.6
Note 1: Embossed reel packaging (5,000 pieces/reel, 500 pieces/reel).
Order by number of reels.
3
FH33 Series●0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
■Connector Dimensions
1mm pitch type
●
A
0.15
B
(1.75)
(V)
G
∞Number of contacts
0.15 G
1
(0.15)
Lot No. indicator
A**
△
HRS mark
Cav No.
Polarizing mark indicator
Number of contacts indicator
(0.15)
(C: FPC insertion slot dimension)
0.1
F
D
F
Notes
1
2
The coplanarity of each terminal lead is within 0.1 max.
The contact terminal lead position indicates the dimension
from the bottom a surface of the insulator body.
Difference of each terminal lead is within 0.1 max.
Slight variations in color of the plastic compounds do not
affect form, fit or function of the connector.
0
0
3
4
0.5 0.1
0.55 0.1
a
1
2
0.15MAX
(1.1)
0.25 0.1
0.15MAX
1
2
1.73 0.2
+0 15
5
After reflow, the terminal plating may change color, however
this does not represent a quality issue.
Unit: mm
A
Part Number
CL No.
Number of Contacts
B
3
5
5
C
D
V
FH33-4S-1SH(**)
580-1322-1-**
580-1323-4-**
580-1326-2-**
4
6
6
6.5
8
5.07
6.57
6.57
5.85
7.35
7.35
1.75
1.25
1.25
FH33-12(6)SB-1SH(**)
FH33J-12(6)SB-1SH(**)
8
Note 1: Embossed reel packaging (5,000 pieces/reel, 500 pieces/reel).
Order by number of reels.
4
FH33 Series●0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
■Recommended PCB mounting pattern and metal mask dimensions
0.4mm pitch, 0.5mm pitch type
●
B
H
∞Number of contacts
0.1 H
0.3 0.05(Land)
T
0.25 0.05(Metal mask)
(0.2)
J
0.1
0.1
(0.2)
K
(A)
*Recommended metal mask thickness = 0.1mm
■Recommended FPC/FFC dimensions
0.4mm pitch, 0.5mm pitch type
●
L
0.05
0.03
T
0.07
B
T
0.03
0.35 0.03(FPC)
0.3 0.03(FFC)
0.27 0.03(0.4mm pitch)
<under 30 pos.>0.3 0.05
<over 31 pos.>0.3 0.03
Note 1: If the stiffener is less than 3.3 mm, E dimension must be 0.5 mm min.
Unit: mm
Part Number
CL No.
Number of Contacts
A
5
B
2.5
4
J
K
L
T
FH33-6S-0.5SH (**)
FH33-9S-0.5SH (**)
FH33-10S-0.5SH (**)
FH33-12S-0.5SH (**)
FH33-14S-0.5SH (**)
FH33-19S-0.5SH (**)
FH33-20S-0.5SH (**)
FH33-26S-0.5SH (**)
FH33-28S-0.5SH (**)
FH33-30S-0.5SH (**)
FH33-32S-0.5SH (**)
FH33-36S-0.5SH (**)
FH33-40S-0.5SH (**)
FH33-45S-0.5SH (**)
FH33M-16S-0.4SH (**)
FH33J-4S-0.5SH (**)
FH33J-10S-0.5SH (**)
FH33J-12S-0.5SH (**)
FH33J-16S-0.5SH (**)
FH33J-18S-0.5SH (**)
FH33J-19S-0.5SH (**)
FH33J-40S-0.5SH (**)
FH33MHJ-65S-0.4SH (**)
580-1301-1-**
580-1303-7-**
580-1304-0-**
580-1302-4-**
580-1305-2-**
580-1307-8-**
580-1317-1-**
580-1306-5-**
580-1300-9-**
580-1312-8-**
580-1310-2-**
580-1311-5-**
580-1308-0-**
580-1316-9-**
580-1319-7-**
580-1329-0-**
580-1324-7-**
580-1328-8-**
580-1331-2-**
580-1334-0-**
580-1332-5-**
580-1330-0-**
580-1325-0-**
6
3.8
4.9
3.5
5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.4
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.4
9
6.5
7
5.3
6.4
10
12
14
19
20
26
28
30
32
36
40
45
16
4
4.5
5.5
6.5
9
5.8
6.9
5.5
6.5
7.5
10
8
6.8
7.9
9
7.8
8.9
11.5
12
15
16
17
18
20
22
24.5
8.3
4
10.3
10.8
13.8
14.8
15.8
16.8
18.8
20.8
23.3
7.1
11.4
11.9
14.9
15.9
16.9
17.9
19.9
21.9
24.4
8.2
9.5
12.5
13.5
14.5
15.5
17.5
19.5
22
10.5
13.5
14.5
15.5
16.5
18.5
20.5
23
6
6.8
2.5
5.5
6.5
8.5
9.5
10
1.5
4.5
5.5
7.5
8.5
9
2.8
3.9
10
12
16
18
19
40
65
7
5.8
6.9
8
6.8
7.9
10
11
11.5
22
27.9
8.8
9.9
9.8
10.9
11.4
21.9
27.8
10.3
20.8
26.7
19.5
25.6
20.5
26.4
5
FH33 Series●0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
■Recommended PCB mounting pattern and metal mask dimensions
1mm pitch type
●
B
H
∞Number of contacts
0.1 H
0.3 0.05(Land)
0.25 0.05(Metal mask)
1
(0.2)
1.15 0.1
W
0.1
(0.2)
J
0.1
0.1
K
(A)
*Recommended metal mask thickness = 0.1mm
■Recommended FPC/FFC dimensions
1mm pitch type
●
L
0.1
0.1
X
0.1
1
0.1
B
<under 30 pos.>0.3 0.05
<over 31 pos.>0.3 0.03
0.65 0.1
1
0.1
Unit: mm
Part Number
CL No.
Number of Contacts
A
6.5
8
B
3
5
5
J
K
L
W
X
1
FH33-4S-1SH(**)
580-1322-1-**
580-1323-4-**
580-1326-2-**
4
6
6
5.3
6.8
6.8
6.4
7.9
7.9
5
1.15
0.65
0.65
FH33-12(6)SB-1SH(**)
FH33J-12(6)SB-1SH(**)
6.5
6.5
0.5
0.5
8
6
FH33 Series●0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
■FH33 Series FPC/FFC Construction (Recommended Specifications)
1. Using Single-sided FPC
Material Name
Material
Thickness (μm)
Covering film layer
Cover adhesive
Polyimide 1 mil thick
(25)
(25)
Nickel under plated 1 to 5μm /
Gold plated 0.2μm
Surface treatment
3
Copper foil
Base adhesive
Base film
Cu
1oz
35
25
Heat-hardened adhesive
Polyimide 1 mil thick
25
Reinforcement material adhesive Heat-hardened adhesive
30
Stiffener
Polyimide 7 mil thick
Total
175
293
2. Using Double-sided FPC
Material Name
Material
Thickness (μm)
Covering film layer
Cover adhesive
Polyimide 1 mil thick
(25)
(25)
Nickel under plated 1 to 5μm /
Gold plated 0.2μm
Surface treatment
3
Through-hole copper
Copper foil
Cu
15
18
Cu
1/2oz
Base adhesive
Base film
Heat-hardened adhesive
Polyimide 1 mil thick
18
25
Base adhesive
Copper foil
Heat-hardened adhesive
18
Cu
1/2oz
18
Cover adhesive
Covering film layer
25
Polyimide 1 mil thick
25
Reinforcement material adhesive Heat-hardened adhesive
50
Stiffener
Polyimide 4 mil thick
Total
100
297
3. Using FFC
Material Name
Material
polyester thermoplastic type
Polyester
Thickness (μm)
Polyester film
Adhesive
(
12
)
(
30
)
Gold plated, soft copper film
Adhesive
35
30
12
30
Polyester
Adhesive
Polyester
Polyester
Total
Stiffener
188
295
π Practical tolerance of thickness dimension is 20 μm
4. Precautions
1. This specification is a recommendation for the construction of the FH33 Series FPC and FFC (t=0.3 ± 0.05).
2. For details about the construction, please contact the FPC/FFC manufacturers.
7
FH33 Series●0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
■Packaging Specifications
Embossed Carrier Tape Dimensions
(Tape width up to 24mm)
Embossed Carrier Tape Dimensions
●
(Tape width 32mm and over)
●
4
0.1 2 0.15
8
0.1
(1.7)
(0.3)
4
0.1 2 0.15
8
0.1
(1.7)
(0.3)
(3)
(3.8)
Flat surface for
placement with
automatic equipment
(1)
1.5+0.1
(3)
(3.8)
0
Unreeling direction
Flat surface for
placement with
automatic equipment
(1)
Unreeling direction
Reel Dimensions
●
(R:INSIDE)
(S:OUTSIDE)
End section
Mounting section
Lead section (400 mm min.)
Embossed carrier tape
Blank section
Blank section
Top cover tape
(10 pockets min.)
(10 pockets min.)
Note: 5,000 pieces per reel.
Embossed tape 32 mm or wider will have perforated feed holes on two sides.
8
FH33 Series●0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
Unit: mm
Part Number
CL No.
Number of Contacts
M
N
P
Q
R
S
FH33-6S-0.5SH (**)
FH33-9S-0.5SH (**)
FH33-10S-0.5SH (**)
FH33-12S-0.5SH (**)
FH33-14S-0.5SH (**)
FH33-19S-0.5SH (**)
FH33-20S-0.5SH (**)
FH33-26S-0.5SH (**)
FH33-28S-0.5SH (**)
FH33-30S-0.5SH (**)
FH33-32S-0.5SH (**)
FH33-36S-0.5SH (**)
FH33-40S-0.5SH (**)
FH33-45S-0.5SH (**)
FH33M-16S-0.4SH (**)
FH33J-4S-0.5SH (**)
FH33J-10S-0.5SH (**)
FH33J-12S-0.5SH (**)
FH33J-16S-0.5SH (**)
FH33J-18S-0.5SH (**)
FH33J-19S-0.5SH (**)
FH33J-40S-0.5SH (**)
FH33MHJ-65S-0.4SH (**)
FH33-4S-1SH (**)
580-1301-1-**
580-1303-7-**
580-1304-0-**
580-1302-4-**
580-1305-2-**
580-1307-8-**
580-1317-1-**
580-1306-5-**
580-1300-9-**
580-1312-8-**
580-1310-2-**
580-1311-5-**
580-1308-0-**
580-1316-9-**
580-1319-7-**
580-1329-0-**
580-1324-7-**
580-1328-8-**
580-1331-2-**
580-1334-0-**
580-1332-5-**
580-1330-0-**
580-1325-0-**
580-1322-1-**
580-1323-4-**
580-1326-2-**
6
16
16
16
16
16
24
24
24
24
24
32
32
44
44
24
16
16
16
24
24
24
44
44
16
16
16
7.5
7.5
--------
--------
--------
--------
--------
--------
--------
--------
--------
--------
28.4
5.3
6.8
17.4
17.4
17.4
17.4
17.4
25.4
25.4
25.4
25.4
25.4
33.4
33.4
45.4
45.4
25.4
17.4
17.4
17.4
25.4
25.4
25.4
45.4
45.4
17.4
17.4
17.4
21.4
21.4
21.4
21.4
21.4
29.4
29.4
29.4
29.4
29.4
37.4
37.4
49.4
49.4
29.4
21.4
21.4
21.4
29.4
29.4
29.4
49.4
49.4
21.4
21.4
21.4
9
10
12
14
19
20
26
28
30
32
36
40
45
16
4
7.5
7.3
7.5
8.3
7.5
9.3
11.5
11.5
11.5
11.5
11.5
14.2
14.2
20.2
20.2
11.5
7.5
11.8
12.3
15.3
16.3
17.3
18.3
20.3
22.3
24.8
8.6
28.4
40.4
40.4
--------
--------
--------
--------
--------
--------
--------
40.4
4.3
10
12
16
18
19
40
65
4
7.5
7.3
7.5
8.3
11.5
11.5
11.5
20.2
20.2
7.5
10.3
11.3
11.8
22.3
28.2
6.8
40.4
--------
--------
--------
6
7.5
8.3
FH33-12(6)S-1SH (**)
FH33J-12(6)S-1SH (**)
6
7.5
8.3
9
FH33 Series●0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
■Recommended Temperature Profile
Using Lead-free Solder paste
●
HRS test conditions
MAX 250ç
Solder method : Reflow, IR/hot air
Environment : Room air
250
200
Solder composition : Paste, 96.5%Sn/3.0%Ag/0.5%Cu
(Senju Metal Industry, Co., Ltd.’s Part Number: M705-
221CM5-32-10.5)
230ç
200ç
Test board
: Glass epoxy 25mm∞50mm∞0.8mm thick
Land dimensions : Contacts lead 0.3mm∞0.65mm
Metal fittings 0.55mm∞0.8mm
150
150ç
(ç)
Metal mask
: Contacts lead 0.25mm∞0.65mm∞0.1mm
100
50
0
thick
Metal fittings 0.55mm∞0.8mm∞0.1mm
thick
25ç
This temperature profile is based on the above conditions.
In individual applications the actual temperature may vary,
depending on solder paste type, volume/thickness and
board
(60 sec.)
90 to 120 sec.
Preheating
(60 sec.)
Sodering
Start
Time (Seconds)
size/thickness. Consult your solder paste and equipment
manufacturer for specific recommendations.
10
FH33 Series●0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
■Operation and Precautions
Operation
1.FPC insertion procedure. Connector installed on the board.
1 Lift up the actuator. Use thumb or index finger.
2 Fully insert the FPC in the connector paral-
lel to mounting surface, with the exposed
conductive traces facing down.
FPC conductor
surface (Bottom side)
3 Rotate down the actuator until firmly closed. It is
critical that the inserted FPC is not moved and
remains fully inserted.
2.FPC removal
1 Lift up the actuator. Carefully withdraw the
FPC.
11
FH33 Series●0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
Precautions
Exercise care when handling connectors. Follow recommendations given
below.
PC board flexing
SPC board connector mounting area
The connectors are straight within 0.1 mm max.
Make sure that the PC board connector mounting area flatness can accept the connector terminals
without causing any failure of the solder joints.
SHandling before mounting on PCB
Insertion of the FPC or operation of the actuator prior to mounting on the PCB is NOT
RECOMMENDED.
SPC Board handling
Exercise caution when handling boards with the connectors installed. Do not apply any forces
affecting soldered joints.
Connector
PCB
Precautions When Inserting or Removing FPC
Pay attention to the following points when inserting FPC.
SActuator operation
Do not apply excessive force when opening the actuator prior to FPC insertion. When opening
make sure that the force is applied only to the actuator itself, avoiding touching of the contacts.
1
Damege to the contacts
Damage to the contacts
2 Axis of rotation
Axis of rotation
Assure free rotation of
the actuator
3 The actuator will rotate 120 degrees
maximum. Do not force it to rotate further.
12
FH33 Series●0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
Precautions
4 When operating the actuator, do so at the
center portion.
As illustrated, do not attempt removal or re-
positioning of the actuator.
5
S FPC Insertionq
The FPC should be aligned parallel with the board surface and perpendicular with the connector (as
shown), then completely inserted.
Actuator
Perpendicular with
the connector
FPC
To assure correct electrical and mechanical connection do not insert FPC at angle. It must be fully
inserted.
Make sure that the FPC is NOT MOVED during the closing of the actuator.
SFPC Insertionw
When inserting the FPC, do not forcefully rub against the bottom surface of the connector insertion
entrance. Doing so will result in the contacts and FPC making strong contact and may cause
deformation of the contacts, peeling of the FPC conductor, and other problems.
Peeling of FPC
conductor
13
FH33 Series●0.4mm,0.5 mm,1mm Pitch, 1.2 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
Precautions
SVerification of the fully closed actuator.
The actuator should be fully closed (as illustrated) and the FPC held firmly in the connector.
Do not press against the actuator when is fully closed. Max force applied to the fully closed actuator
should not exceed 1 N.
Routing the FPC (FPC fully inserted/ actuator closed)
SFPC Load
Do not apply force in excess of 0.15N max. in the upward direction (as illustrated). Do not bend the
FPC too close to the actuator.
Load: 0.15N max.
Removing the FPC
Rotate the actuator to the open position (maximum open angle of 120°). Carefully withdraw the FPC.
Other Precautions
SHand Soldering Precautions
When hand soldering:
1
2
3
Do not perform reflow or hand soldering with the FPC inserted in the connector.
Do not apply excessive heat or touch the soldering iron anywhere other than the connector leads.
Do not use excessive amount of solder or flux compounds.
Operation of the actuator and contacts may be affected by excessive amounts of solder or flux
compounds.
14
FH33 Series●0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
:
NOTES
15
FH33 Series●0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
USA:
USA:
USA:
HIROSE ELECTRIC (U.S.A.), INC. Headquarters
HIROSE ELECTRIC (U.S.A.), INC. North California Office HIROSE ELECTRIC (U.S.A.), INC. Detroit Office (Automotive)
2688 Westhills Court, Simi Valley, CA 93065-6235 20400 Stevens Creek Blvd., Ste 250, Cupertino, CA 37677 Professional Center Drive, Suite #100C
Phone : 1-805-522-7958
Fax : 1-805-522-3217
http://www.hiroseusa.com
95014
Livonia, MI 48154
Phone : 1-408-253-9640
Fax : 1-408-253-9641
http://www.hiroseusa.com
Phone : 1-734-542-9963
Fax : 1-734-542-9964
http://www.hiroseusa.com
GERMANY:
THE NETHERLANDS:
UK:
HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH
Herzog-Carl-Strasse 4 D-73760 Ostfildern
(Scharnhauser Park)
Phone : 49-711-4560-02-1
Fax : 49-711-4560-02-299
http://www.hirose.de
HIROSE ELECTRIC EUROPE B.V.
Hogehillweg #8 1101 CC Amsterdam Z-O
Phone : 31-20-6557460
Fax : 31-20-6557469
http://www.hiroseeurope.com
HIROSE ELECTRIC EUROPE B.V. UK BRANCH
First Floor, St Andrews House, Caldecotte Lake
Business Park, Milton Keynes MK7 8LE
Phone : 44-1908-369060
Fax : 44-1908-369078
http://www.hirose.co.uk
CHINA:
CHINA:
CHINA:
HIROSE ELECTRIC CO., LTD. BEIJING REPRESENTATIVE OFFICE HIROSE ELECTRIC (SHANGHAI) CO., LTD.
HIROSE ELECTRIC CO., LTD. SHENZHEN OFFICE
A1001, Ocean International Center, Building 56# East 4th 1501-02, Cross Tower Building, 318 Fuzhou Road, Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre
Ring Middle Road, Chao Yang District, Beijing, 100025
Phone : 86-10-5165-9332
Huang Pu District, Shanghai 200001
Phone : 86-21-6391-3355
5002, ShenNanDong Road, ShenZhen City, Guangdong Province, 518008
Phone : 86-755-8207-0851
Fax : 86-10-5908-1381
Fax : 86-21-6335-0767
Fax : 86-755-8207-0873
http://www.hirose-china.com.cn
http://www.hirose-china.com.cn
http://www.hirose-china.com.cn
HONG KONG:
TAIWAN:
SINGAPORE:
HIROSE ELECTRIC HONGKONG TRADING CO., LTD.
Unit 1102 A&B, Energy Plaza, 92 Granville Road, 103 8F, No.87, Zhengzhou Rd., Taipei
Tsim Sha Tsui East, Kowloon
Phone : 852-2803-5338
Fax : 852-2591-6560
HIROSE ELECTRIC TAIWAN CO., LTD.
HIROSE ELECTRIC CO., LTD.
10 Anson Road #26-16 International Plaza 079903
Phone : 65-6324-6113
65-6324-6123
Fax :
http://www.hirose-singapore.com.sg
Phone : 886-2-2555-7377
Fax : 886-2-2555-7350
http://www.hirose-taiwan.com.tw
http://www.hirose-hongkong.com.hk
KOREA:
HIROSE KOREA CO., LTD.
1261-10, Jeoungwhang-Dong, Shihung-City,
Kyunggi-Do 429-450
Phone : 82-31-496-7000,7124
Fax : 82-31-496-7100
http://www.hirose.co.kr
®
6-3,Nakagawa Chuoh-2-Chome,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
TEL: 81-45-620-3526 Fax: 81-45-591-3726
http://www.hirose.com
+
+
http://www.hirose-connectors.com
The contents of this catalog are current as of date of 11/2013. Contents are subject to change without notice for the pur pose of improvements.
16
相关型号:
FH33J-19S-0.5SH
0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
HRS
FH33J-19S-0.5SH(10)
Card Edge Connector, 19 Contact(s), 1 Row(s), Female, Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Locking, HALOGEN FREE
HRS
FH33J-19S-0.5SH(99)
Card Edge Connector, 19 Contact(s), 1 Row(s), Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Locking
HRS
FH33J-40S-0.5SH
0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
HRS
FH33J-4S-0.5SH
0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
HRS
FH33J-4S-0.5SH(10)
Card Edge Connector, 4 Contact(s), 1 Row(s), Female, Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Locking, HALOGEN FREE
HRS
FH33J-4S-0.5SH(99)
Card Edge Connector, 4 Contact(s), 1 Row(s), Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Locking
HRS
FH33M-16S-0.4SH
0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
HRS
FH33MHJ-65S-0.4SH
0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
HRS
FH33MHJ-65S-0.4SH(10)
Card Edge Connector, 65 Contact(s), 1 Row(s), Female, Right Angle, 0.016 inch Pitch, Surface Mount Terminal, Locking, HALOGEN FREE
HRS
FH33MHJ-65S-0.4SH(99)
Card Edge Connector, 65 Contact(s), 1 Row(s), Right Angle, 0.016 inch Pitch, Surface Mount Terminal, Locking
HRS
©2020 ICPDF网 联系我们和版权申明