FH35-19S-0.3SHW(99) [HRS]
Card Edge Connector, 19 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal;
| 型号： | FH35-19S-0.3SHW(99) |
| 厂家： | 
HRS |
| 描述： | Card Edge Connector, 19 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal PC 连接器 |
| 文件： | 总11页 (文件大小：614K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
NEW
0.3 mm Pitch, 0.9 mm above the board, Top and bottom Contact,
Back-Flip actuator Flexible Printed Circuit ZIF Connectors
FH35 Series
■Small size (35 pos. shown)
0.9mm
■Features
■Easy FPC insertion
1. Low-profile
With the 0.9 mm above the board and width of 3.2 mm the
connectors are used in a space saving applications.
AAccttuuaattoorr
2. Unique Back-Flip rotating actuator
The rotating actuator opens from the back of the connector,
assuring reliable electrical and mechanical connection.
3. Delivered with the actuator open
FPC can be immediately inserted without the need for the
opening of the actuator.
4. Easy FPC insertion
FPC
Entry chamfers at all sides of the FPC insertion slot assure
correct insertion and positioning of the FPC.
5. Accepts standard FPC thickness
0.2mm thick standard Flexible Printed Circuit (FPC) can be
used. This is the only ultra-low profile ZIF connector using
standard FPC.
■Completely locked
6. Conductive traces on the PCB can run under
the connector
No exposed contacts on the bottom of the connector.
7. Board placement with automatic equipment
Flat upper surface and tape and reel packaging facilitate
vacuum pick-up and placement. Standard reel packaging
contains 5000 connectors.
8. Halogen-free *
(FH35J,FH35RW,FH35W series)
*As defined by IEC61249-2-21
Br-900ppm maximum, Cl-900ppm maximum,
Cl + Br combined-1,500ppm maximum
9. Optional 500 piece reel packaging
Standard packaging is 5,000 pieces per reel; however, 500
piece reels are possible.
(Emboss reel external diameter is 180mm.)
2010.9
1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH35 Series■0.3 mm Pitch, 0.9 mm above the board, Top and bottom Contact, Back-Flip actuator Flexible Printed Circuit ZIF Connectors
■Specifications
Operating
temperature range
Storage
temperature range
Current rating
-55 to +85°C (Note 2)
-10 to +50°C (Note 3)
0.2 A (Note 1)
30 Vrms AC
Rating
Operating
humidity range
Relative humidity 90% Storage
max. (No condensation) humidity range
Relative humidity 90%
max. (No condensation)
Voltage rating
Recommended FPC
Item
Thickness: 0.2 0.03, gold plated contact pads
Specification
Conditions
1.Insulation resistance 50 Mø min
2.Withstanding voltage No flashover or insulation breakdown
100 mø max.
100 V DC
90 Vrms AC / one minute
3.Contact resistance
1 mA AC
* Including FPC conductor resistance
Contact resistance: 100 mø max.
No damage, cracks, or parts dislocation
4.Durability
10 cycles
No electrical discontinuity of 1 µs or longer
Frequency: 10 to 55 Hz,
5.Vibration
6.Shock
Contact resistance: 100 mø max.
single amplitude of 0.75 mm,
No damage, cracks, or parts dislocation
10 cycles in each of the 3 axial directions
No electrical discontinuity of 1 µs or longer
Contact resistance: 100 mø max.
No damage, cracks, or parts dislocation
Acceleration: 981 m/s2, 6 ms duration,
sine half-wave, 3 cycles in each of the 3 axis
Contact resistance: 100 mø max.
Insulation resistance: 50 Mø min.
No damage, cracks, or parts looseness
7.Humidity
(Steady state)
96 hours at 40ç and humidity of 90 to 95%
Contact resistance: 100 mø max.
Insulation resistance: 50 Mø min.
No damage, cracks, or parts dislocation
Temperature:-55ç■+15ç to +35ç■+85ç■+15ç to +35ç
Time: 30■ 2 to 3 ■ 30■ 2 to 3 minutes
5 cycles
8.Temperature cycle
9.Resistance to
soldering heat
Reflow: At the recommended temperature profile
Manual soldering: 350 10°C for 5 seconds
No deformation of components affecting performance
Note 1: When passing the current through all of the contacts, use 70% of the rated current.
Note 2: Includes temperature rise caused by current flow.
Note 3: The term "storage" refers to products stored for a long period prior to mounting and use.
The operating temperature and humidity range covers the non-conducting condition of connectors after board mounting.
Note 4: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and
specifications for a specific part number shown.
■Materials
Part
Material
LCP
Finish
Remarks
UL94V-0
FH35 series
FH35B series
FH35J series
FH35W series
FH35R series
FH35RW series
FH35 series
Color:Beige
Color:Gray
Insulator
FH35B series
FH35J series
FH35R series
FH35RW series
FH35W series
Color:Black
UL94V-0
UL94HB
PA
Color:Light brown
---------------
---------------
Contacts
Metalfittings
Phosphor bronze
Phosphor bronze
Gold plating with nickel barrier
Pure tin reflow plating
■Ordering information
B
3
FH 35
- 35S - 0.3 SHW (50)
1
2
4
5
6
7
1 Series name : FH
4 Number of positions : 15 to 51
5 Contact pitch : 0.3 mm
6 Contact type
SH : SMT horizontal staggered mounting
7 Specifications:
2 Series No.
3 Blank:Top contact
B:Top contact,Short actuator
: 35
J:Top contact,Halogen free (Flame retardance UL94V-0).
W:Top contact,Halogen free (Flame retardance UL94VHB)
R:Bottom contact
.
(50) : Nickel barrier gold plating 5,000 pieces / reel
(99) : Nickel barrier gold plating 500 pieces / reel
RW:Bottom contact,Halogen free (Flame retardance UL94VHB).
2
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH35 Series■0.3 mm Pitch, 0.9 mm above the board, Top and bottom Contact, Back-Flip actuator Flexible Printed Circuit ZIF Connectors
■Connector Dimensions
A
0.3 0.1
B
0.6 0.1
(0.12)
0.6 0.1
(0.12)
C
Polarizing mark indicator
Number of contacts indicator
B
(0.15)
(0.6)
(D: FPC insertion slot dimension)
E
(3)
B
B(FH35B Series)
(4.2)
(3.7)
(1.45)
(1.15)
(0.55)
(1.45)
(1.15)
(0.55)
0.33 0.1
0.15 0.15
0.4 0.1
0.4±0.1
0.05±0.15
0.1
0.33 0.1
0.15 0.15
0.05 0.15
3
0.15
3
0.15
0.1
0.1
0.1
Note 1 : The coplanarity of each terminal lead within specified dimension is 0.1 mm Max.
Note 2 : Packaged on tape and reel only. Check packaging specification.
Note 3 : Slight variations in color of the plastic compounds do not affect form, fit or function of the connector.
Note 4 : After reflow, the terminal plating may change color, however this does not represent a quality issue.
All dimensions: mm
Part Number
CL No.
Number of contacts
A
B
C
D
E
FH35-19S-0.3SHW(**)
FH35-25S-0.3SHW(**)
FH35-27S-0.3SHW(**)
FH35-31S-0.3SHW(**)
FH35-33S-0.3SHW(**)
FH35-35S-0.3SHW(**)
FH35-39S-0.3SHW(**)
FH35-41S-0.3SHW(**)
FH35-45S-0.3SHW(**)
FH35-49S-0.3SHW(**)
FH35-51S-0.3SHW(**)
FH35B-15S-0.3SHW(**)
FH35B-19S-0.3SHW(**)
FH35B-25S-0.3SHW(**)
FH35B-27S-0.3SHW(**)
FH35J-25S-0.3SHW(**)
FH35R-41S-0.3SHW(**)
FH35R-51S-0.3SHW(**)
FH35RW-21S-0.3SHW(**)
FH35RW-25S-0.3SHW(**)
FH35W-11S-0.3SHW(**)
FH35W-21S-0.3SHW(**)
FH35W-25S-0.3SHW(**)
FH35W-31S-0.3SHW(**)
FH35W-35S-0.3SHW(**)
FH35W-51S-0.3SHW(**)
580-1502-3-**
580-1504-9-**
580-1515-5-**
580-1514-2-**
580-1503-6-**
580-1501-0-**
580-1512-7-**
580-1520-5-**
580-1505-1-**
580-1513-0-**
580-1506-4-**
580-1524-6-**
580-1507-7-**
580-1509-2-**
580-1510-1-**
580-1525-9-**
580-2904-2-**
580-2905-5-**
580-2903-0-**
580-2902-7-**
580-1521-8-**
580-1522-0-**
580-1508-0-**
580-1511-4-**
580-1526-1-**
580-1516-8-**
19
25
27
31
33
35
39
41
45
49
51
15
19
25
27
25
41
51
21
25
11
21
25
31
35
51
7.3
9.1
9.7
4.8
6.6
7.2
8.4
9
5.4
7.2
7.8
9
9.6
10.2
11.4
12
13.2
14.4
15
4.2
5.4
7.2
7.8
7.2
12
15
6
7.2
3
6
7.2
9
10.2
15
6.03
7.83
8.43
6.73
8.53
9.13
10.9
11.5
12.1
13.3
13.9
15.1
16.3
16.9
6.1
7.3
9.1
9.7
9.1
13.9
16.9
7.9
9.1
4.9
7.9
9.1
10.9
12.1
16.9
9.63
10.33
10.93
11.53
12.73
13.33
14.53
15.73
16.33
5.53
6.73
8.53
9.13
8.53
13.33
16.33
7.33
8.53
4.33
7.33
8.53
10.33
11.53
16.33
10.23
10.83
12.03
12.63
13.83
15.03
15.63
4.83
6.03
7.83
8.43
7.83
12.63
15.63
6.63
7.83
3.63
6.63
7.83
9.63
10.83
15.63
9.6
10.8
11.4
12.6
13.8
14.4
3.6
4.8
6.6
7.2
6.6
11.4
14.4
5.4
6.6
2.4
5.4
6.6
8.4
9.6
14.4
Tape and reel packaging (5,000 pieces/reel).
Order by number of reels.
3
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH35 Series■0.3 mm Pitch, 0.9 mm above the board, Top and bottom Contact, Back-Flip actuator Flexible Printed Circuit ZIF Connectors
■Recommended PCB mounting pattern and metal mask dimensions
(Recommended metal mask thickness: t=0.1)
B
0.05
0.3 0.03
(0.23:Metal mask)
0.6 0.05
0.3 0.05
(0.3:Metal mask)
0.4 0.05
0.5 0.05
0.3 0.03
0.6 0.05
(0.23:Metal mask)
C
0.05
■Recommended FPC Dimensions
F
C
0.05
0.03
0.3 0.07
0.3 0.07
0.2 0.03
0.6 0.02
0.3 0.02
+0.04
–0.03
0.3
Check mark for
Press misalignment
+0.04
–0.03
0.3
0.1 0.02
(0.2)
(0.07)
0.6 0.07
B
0.03
0.6 0.07
πStiffener dimension should be 2.75mm min., and M dimension should be 0.5mm for
improved flexibility of FPC.
All dimensions: mm
Part Number
CL No.
Number of contacts
B
C
F
FH35-19S-0.3SHW(**)
FH35-25S-0.3SHW(**)
FH35-27S-0.3SHW(**)
FH35-31S-0.3SHW(**)
FH35-33S-0.3SHW(**)
FH35-35S-0.3SHW(**)
FH35-39S-0.3SHW(**)
FH35-41S-0.3SHW(**)
FH35-45S-0.3SHW(**)
FH35-49S-0.3SHW(**)
FH35-51S-0.3SHW(**)
FH35B-15S-0.3SHW(**)
FH35B-19S-0.3SHW(**)
FH35B-25S-0.3SHW(**)
FH35B-27S-0.3SHW(**)
FH35J-25S-0.3SHW(**)
FH35R-41S-0.3SHW(**)
FH35R-51S-0.3SHW(**)
FH35RW-21S-0.3SHW(**)
FH35RW-25S-0.3SHW(**)
FH35W-11S-0.3SHW(**)
FH35W-21S-0.3SHW(**)
FH35W-25S-0.3SHW(**)
FH35W-31S-0.3SHW(**)
FH35W-35S-0.3SHW(**)
FH35W-51S-0.3SHW(**)
580-1502-3-**
580-1504-9-**
580-1515-5-**
580-1514-2-**
580-1503-6-**
580-1501-0-**
580-1512-7-**
580-1520-5-**
580-1505-1-**
580-1513-0-**
580-1506-4-**
580-1524-6-**
580-1507-7-**
580-1509-2-**
580-1510-1-**
580-1525-9-**
580-2904-2-**
580-2905-5-**
580-2903-0-**
580-2902-7-**
580-1521-8-**
580-1522-0-**
580-1508-0-**
580-1511-4-**
580-1526-1-**
580-1516-8-**
19
25
27
31
33
35
39
41
45
49
51
15
19
25
27
25
41
51
21
25
11
21
25
31
35
51
4.8
6.6
7.2
8.4
9
5.4
7.2
7.8
9
9.6
10.2
11.4
12
13.2
14.4
15
4.2
5.4
7.2
7.8
7.2
12
15
6
7.2
3
6
7.2
9
10.2
15
6
7.8
8.4
9.6
10.2
10.8
12
12.6
13.8
15
9.6
10.8
11.4
12.6
13.8
14.4
3.6
4.8
6.6
7.2
6.6
11.4
14.4
5.4
6.6
2.4
5.4
6.6
8.4
9.6
15.6
4.8
6
7.8
8.4
7.8
12.6
15.6
6.6
7.8
3.6
6.6
7.8
9.6
10.8
15.6
14.4
4
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH35 Series■0.3 mm Pitch, 0.9 mm above the board, Top and bottom Contact, Back-Flip actuator Flexible Printed Circuit ZIF Connectors
■Recommended FPC construction
■Contact FPC manufacturer for specific details
FPC : Flexible Printed Circuit
1. Using Single-sided FPC
Material Thickness
(µm)
Material Name
Material
Connecting side
(
(
)
)
Covering film layer
Cover adhesive
Polyimide 1 mil thick.
25
25
0.2µm thick gold plated over 1 to 5µm
nickel underplating
Surface treatment
Copper foil
3
Cu
1oz
35
25
25
40
75
Base adhesive
Base film
Thermosetting adhesive
Polyimide 1 mil thick
Reinforcement material adhesive Thermosetting adhesive
Stiffener
Polyimide 3 mil thick
Total
203
Back side
FPC : Flexible Printed Circuit
2. Using Double-sided FPC
Material Thickness
(µm)
Material Name
Material
Connecting side
(
(
)
)
Polyimide 1 mil thick
Covering layer film
Cover adhesive
Surface treatment
Through-hole copper
Copper foil
25
25
3
0.2µm thick gold plated over 1 to 5µm
nickel underplating
Cu
15
18
18
25
18
18
25
25
25
25
Cu
1/2oz
Thermosetting adhesive
Polyimide 1 mil thick
Thermosetting adhesive
Base adhesive
Base film
Base adhesive
Copper foil
(
)
Cu
1/2oz
Thermosetting adhesive
Polyimide 1 mil thick
Thermosetting adhesive
Polyimide 1 mil thick
Total
Cover adhesive
Covering film layer
Reinforcement material adhesive
Stiffener
Back side
197
*
To prevent release of the FPC due to its bending, use of the double sided FPC with copper foil on the back side is NOT RECOMMENDED.
3. Precautions
1. This specification is a recommendation for the construction of the FH35 Series FPC (t=0.2 ±0.03).
2. For details about the construction, please contact the FPC/FFC manufacturers.
5
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH35 Series■0.3 mm Pitch, 0.9 mm above the board, Top and bottom Contact, Back-Flip actuator Flexible Printed Circuit ZIF Connectors
■Packaging Specification
■Embossed Carrier Tape Dimensions
(Tape width to 24mm max.)
(2.25)
(0.3)
4
0.1
2
8
0.15
0.1
(0.8)
(0.7)
(0.8)
(4.8)
Unreeling direction
(1.6)
■Embossed Carrier Tape Dimensions
(2.25)
(Tape width 32mm min.)
(0.3)
1.5 +0.1
0
■Reel Dimensions
(L: INSIDE)
(M: OUTSIDE)
End section
Mounting section
Lead section (400mm min.)
No connector inserted
(25 pockets min.)
No connector inserted
(25 pockets min.)
Embossed carrier tape
Top cover tape
6
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH35 Series■0.3 mm Pitch, 0.9 mm above the board, Top and bottom Contact, Back-Flip actuator Flexible Printed Circuit ZIF Connectors
All dimensions: mm
Part Number
CL No.
Number of contacts
G
H
––
J
K
L
M
21.4
29.4
29.4
29.4
29.4
29.4
29.4
29.4
29.4
37.4
37.4
21.4
21.4
29.4
29.4
29.4
29.4
37.4
29.4
29.4
21.4
29.4
29.4
29.4
29.4
37.4
FH35-19S-0.3SHW(**)
FH35-25S-0.3SHW(**)
FH35-27S-0.3SHW(**)
FH35-31S-0.3SHW(**)
FH35-33S-0.3SHW(**)
FH35-35S-0.3SHW(**)
FH35-39S-0.3SHW(**)
FH35-41S-0.3SHW(**)
FH35-45S-0.3SHW(**)
FH35-49S-0.3SHW(**)
FH35-51S-0.3SHW(**)
FH35B-15S-0.3SHW(**)
FH35B-19S-0.3SHW(**)
FH35B-25S-0.3SHW(**)
FH35B-27S-0.3SHW(**)
FH35J-25S-0.3SHW(**)
FH35R-41S-0.3SHW(**)
FH35R-51S-0.3SHW(**)
FH35RW-21S-0.3SHW(**)
FH35RW-25S-0.3SHW(**)
FH35W-11S-0.3SHW(**)
FH35W-21S-0.3SHW(**)
FH35W-25S-0.3SHW(**)
FH35W-31S-0.3SHW(**)
FH35W-35S-0.3SHW(**)
FH35W-51S-0.3SHW(**)
580-1502-3-**
580-1504-9-**
580-1515-5-**
580-1514-2-**
580-1503-6-**
580-1501-0-**
580-1512-7-**
580-1520-5-**
580-1505-1-**
580-1513-0-**
580-1506-4-**
580-1524-6-**
580-1507-7-**
580-1509-2-**
580-1510-1-**
580-1525-9-**
580-2904-2-**
580-2905-5-**
580-2903-0-**
580-2902-7-**
580-1521-8-**
580-1522-0-**
580-1508-0-**
580-1511-4-**
580-1526-1-**
580-1516-8-**
19
25
27
31
33
35
39
41
45
49
51
15
19
25
27
25
41
51
21
25
11
21
25
31
35
51
16
24
24
24
24
24
24
24
24
32
32
16
16
24
24
24
24
32
24
24
16
24
24
24
24
32
7.5
7.5
17.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
33.4
33.4
17.4
17.4
25.4
25.4
25.4
25.4
33.4
25.4
25.4
17.4
25.4
25.4
25.4
25.4
33.4
––
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
14.2
14.2
7.5
9.3
––
9.9
––
11.1
11.7
12.4
13.5
14.1
15.3
16.5
17.1
6.3
––
––
––
––
––
28.4
28.4
––
––
7.5
7.5
––
11.5
11.5
11.5
11.5
14.2
11.5
11.5
7.5
9.3
––
9.9
––
9.3
––
14.1
17.1
8.1
28.4
––
––
9.3
––
5.1
––
11.5
11.5
11.5
11.5
14.2
8.1
––
9.3
––
11.1
12.4
17.1
––
28.4
Tape and reel packaging (5,000 pieces/reel).
Note 1: Reserved for future product expansion. Contact HRS for details on availability.
7
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH35 Series■0.3 mm Pitch, 0.9 mm above the board, Top and bottom Contact, Back-Flip actuator Flexible Printed Circuit ZIF Connectors
■Temperature Profile
■Using Lead-free Solder Paste
MAX 250ç
HRS test condition
Solder method
Environment
:Reflow, IR/hot air
:Room air
250
200
150
100
50
230ç
Solder composition :Paste, 96.5%Sn/3.0%Ag/0.5%Cu
(Senju Metal Industry, Co., Ltd.'s
200ç
(ç)
Part Number:M705-221CM5-32-10.5)
Test board
Land dimensions :0.3mm∞0.65mm, 0.3mm∞0.8mm
Metal mask :0.23∞0.55, 0.23∞0.65∞0.1mm thick
:Glass epoxy 25mm∞50mm∞0.8mm thick
150ç
The temperature profiles shown are based on the above
conditions.
In individual applications the actual temperature may vary,
depending on solder paste type, volume / thickness and board
size / thickness. Consult your solder paste and equipment
manufacturer for specific recommendations.
25ç
(60sec.) 90 sec. to 120 sec.
Preheating
(60sec.)
Soldering
0
Start
Time (Seconds)
8
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH35 Series■0.3 mm Pitch, 0.9 mm above the board, Top and bottom Contact, Back-Flip actuator Flexible Printed Circuit ZIF Connectors
■Connector Operation and Precautions
Operation
Exercise care when handling connectors. Follow recommendations given below.
1. As delivered
1
Delivered with the actuator open. There is no need to operate the
actuator prior to the insertion of the FPC.
The actuator is open when delivered in
the embossed tape packaging
2. FPC insertion (Top contact)
1
Make sure that the conductive pads are facing up.
FPC conductive pads are facing up
2
Align the FPC perpendicular with the connector and insert it firmly
all the way.
*For the bottom contact, reverse.
3. FPC correct insertion verification (Top contact)
A visual comparison of the edge of the housing opening and the FPC pattern boundary will prevent diagonal inser-
tion and partial insertion errors.
FPC pattern boundary
Edge of the insulator body
Correct insertion
Diagonal insertion
Partial insertion
9
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH35 Series■0.3 mm Pitch, 0.9 mm above the board, Top and bottom Contact, Back-Flip actuator Flexible Printed Circuit ZIF Connectors
Operation
4. Locking
1
After FPC/FFC insertion, rotate the actuator down to a full stop, pushing it at the center.
Rotate
Excessive force after the actuator is already closed
Do NOT close at the ends.
Push at the center of the actuator.
5. FPC removal (Lock release)
Carefully rotate the actuator up to 90°, lifting it at the center.
Rotate (lift)
Do not attempt to open more than 90°
Lift at the center
Do not open (lift) at one end.
* The actuator opens by rotating it in the direction OPPOSITE to the direction of the insertion of the FPC.
DO NOT attempt to open it from the same side as the insertion of the FPC.
10
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH35 Series■0.3 mm Pitch, 0.9 mm above the board, Top and bottom Contact, Back-Flip actuator Flexible Printed Circuit ZIF Connectors
Precautions when mounting connectors on the PCB
■Handling before mounting on PCB
Insertion of the FPC or operation of the actuator prior to mounting on the PCB is NOT RECOMMENDED.
■PC board warpage
Minimize the warpage as much as possible. The connector is straight within 0.1 mm max. Make sure that the
mounting area flatness can accept the connector terminals without causing any failure of the solder joints.
■Forces on the board
■When braking the large PC board into individual boards exercise care NOT to damage the installed connectors.
■When attaching the boards or other components with the screws make sure that any stresses will NOT cause
board deflections affecting the mounting areas of the connector
Connector
PCB
Other precautions
■When hand soldering:
Do not perform hand soldering with the FPC inserted in the connector.
• Do not apply excessive heat or touch the soldering iron anywhere other than the connector leads.
• Do not use excessive amount of solder or flux compounds.
Operation of the actuator or contacts may be affected by excessive amounts of solder or flux compounds.
11
相关型号：
FH35-21S-0.3SHW(50)
Card Edge Connector, 21 Contact(s), 1 Row(s), Female, Right Angle, 0.012 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator, ROHS COMPLIANT
HRS
FH35-25S-0.3SHW(10)
Card Edge Connector, 25 Contact(s), 2 Row(s), Right Angle, 0.024 inch Pitch, Surface Mount Terminal, Locking
HRS
FH35-25S-0.3SHW(50)
Card Edge Connector, 25 Contact(s), 2 Row(s), Female, Right Angle, 0.012 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator, ROHS COMPLIANT
HRS
FH35-25S-0.3SHW(99)
Card Edge Connector, 25 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal
HRS
FH35-27S-0.3SHW(50)
Card Edge Connector, 27 Contact(s), 2 Row(s), Female, Right Angle, 0.012 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator, ROHS COMPLIANT
HRS
FH35-27S-0.3SHW(99)
Card Edge Connector, 27 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal
HRS
FH35-33S-0.3SHW(50)
Card Edge Connector, 33 Contact(s), 2 Row(s), Female, Right Angle, 0.012 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator, ROHS COMPLIANT
HRS
FH35-33S-0.3SHW(99)
Card Edge Connector, 33 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal
HRS
FH35-35S-0.3SHW(50)
Card Edge Connector, 35 Contact(s), 2 Row(s), Female, Right Angle, 0.012 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator, ROHS COMPLIANT
HRS
FH35-41S-0.3SHW(50)
Card Edge Connector, 41 Contact(s), 2 Row(s), Female, Right Angle, 0.012 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator, ROHS COMPLIANT
HRS
FH35-41S-0.3SHW(99)
Card Edge Connector, 41 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal
HRS
©2020 ICPDF网 联系我们和版权申明