FH36W-33S-03SHW [HRS]
0.3 mm Pitch, 1.0 mm above the board Flexible Printed Circuit ZIF Connectors; 0.3 mm间隙为1.0mm的板柔性印刷电路ZIF连接器上方型号: | FH36W-33S-03SHW |
厂家: | HRS |
描述: | 0.3 mm Pitch, 1.0 mm above the board Flexible Printed Circuit ZIF Connectors |
文件: | 总12页 (文件大小:634K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
NEW
0.3 mm Pitch, 1.0 mm above the board Flexible Printed Circuit ZIF Connectors
FH36 Series
■Space saving (51 positions shown)
2.7mm
[51 Positions]
■Features
Metal fittings do not protrude outside of the connector body
1. Low-profile and light weight
■Can be mounted over conductive traces
Weight: Reduced approximately 30%
Board footprint: Reduced approximately 15%
(As compared with Hirose Electric's FH26 Series connectors
(51 positions)
2. Easy solderability on the PC board
The soldering leads are on 0.6 mm pitch, exiting on front and
back of the connector.
No exposed contacts on the bottom of
the connector
3. Conducive traces on the PCB can run under
the connector
■Operation
(1) Actuator open
(2) Insert FPC
No exposed contacts on the bottom of the connector.
Actuator
1
4. Easy FPC insertion and reliable electrical
connection
Proven Flip Lock actuator allows easy insertion of FPC and
provides a tactile sensation when fully closed, confirming
complete electrical and mechanical connection.
2
FPC
5. FPC position hold
Tabs on each side of the FPC assure correct placement
and hold in the connector prior to closing of the actuator.
(3) Close the actuator
(4) FPC connected
6. Accepts standard FPC thickness
0.2mm thick standard Flexible Printed Circuit (FPC) can be
used. This is the only ultra-low profile ZIF connector using
standard FPC.
3
7. Board placement with automatic equipment
Flat upper surface and tape and reel packaging facilitate
vacuum pick-up and placement.
4
Standard reel packaging contains 5,000 connectors.
■FPC temporary hold
8. Halogen-free *
(FH36W Series)
*As defined by IEC61249-2-21
Br-900ppm maximum, Cl-900ppm maximum,
Cl + Br combined-1,500ppm maximum
2010.9
1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH36 Series■0.3 mm Pitch, 1.0 mm above the board Flexible Printed Circuit ZIF Connectors
■Specifications
Operating
temperature range
Storage
temperature range
Current rating
-55 to +85°C (Note 2)
-10 to +50°C (Note 3)
0.2 A DC (Note 1)
30 Vrms AC
Rating
Operating
humidity range
Relative humidity 90% Storage
max. (No condensation) humidity range
Relative humidity 90%
max. (No condensation)
Voltage rating
Recommended FPC Thickness: 0.2±0.03mm Gold plated
Item
Specification
Conditions
100 V DC
1.Insulation resistance 50 Mø min
90 Vrms AC / one minute
2.Withstanding voltage No flashover or insulation breakdown
100 mø max.
* Including FPC conductor resistance
3.Contact resistance
1 mA
Contact resistance: 100 mø max.
No damage, cracks, or parts dislocation
4.Durability
10 cycles
No electrical discontinuity of 1 µs or longer
Contact resistance: 100 mø max.
No damage, cracks, or parts dislocation
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm
10 cycles in each of the 3 directions
5.Vibration
6.Shock
No electrical discontinuity of 1 µs or longer
Contact resistance: 100 mø max.
No damage, cracks, or parts dislocation
Acceleration of 981m/s2, 6 ms duration,
sine half-wave, 3 cycles in each of the 3 axis
Contact resistance: 100 mø max.
Insulation resistance: 50 Mø min.
No damage, cracks, or parts dislocation
7.Humidity
(Steady state)
96 hours at a temperature of 40°C and humidity of
90 to 95%
Contact resistance: 100 mø max.
Insulation resistance: 50 Mø min.
No damage, cracks, or parts dislocation
Temperature:-55ç■+15ç to +35ç■+85ç■+15ç to +35ç
Time: 30■ 2 to 3 ■ 30■ 2 to 3 minutes
5 cycles
8.Temperature cycle
9.Resistance to
soldering heat
1) Reflow: At the recommended temperature profile.
2) Manual soldering: 350ç 10ç for 5 seconds
No deformation of components affection performance.
Note 1: When passing the current through all of the contacts, use 70% of the rated current.
Note 2: Includes temperature rise caused by current flow.
Note 3: The term "storage" refers to products stored for a long period prior to mounting and use.
The operating temperature and humidity range covers the non-conducting condition of installed connectors in storage,
shipment or during transportation.
Note 4: Small blisters of the molding compounds in small areas will not affect form, fit or function.
Note 5: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and
specifications for a specific part number shown.
■Materials
Part
Material
LCP
Finish
Remarks
UL94V-0
Insulator
Color: Beige
FH36 series: Dark brown
FH36W series: Light brown
Gold plating
Actuator
PA
UL94HB
-----------------
-----------------
Contacts
Phosphor bronze
Metal fittings
Pure tin reflow plating
■Ordering information
FH 36 W - 51S - 0.3 SHW (50)
1
2
3
4
5
6
7
1 Series name
2 Series No.
: FH
: 36
4 Number of positions : 11 to 61
5 Contact pitch : 0.3mm
3 Blank :Standard
W :Halogen-free
6
7
Termination type: SMT horizontal staggered mounting type
Plating specifications (50)…Gold plating with nickel barrier
(Flame retardance UL94HB).
2
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH36 Series■0.3 mm Pitch, 1.0 mm above the board Flexible Printed Circuit ZIF Connectors
■Connector Dimensions
A
0.15
0.1
0.3 0.1
B
0.6 0.1
(0.12)
Lot No. indicator
A * *
Cav No.
HRS mark
0.6 0.1
Number of contacts indicator
(0.12)
C
0.1
(0.47)
0.1
(0.25)
1
(D: FPC insertion slot dimension)
0.1
1
0.1
E
(2.7)
Note 1 : The coplanarity of each terminal lead is within 0.1.
Note 2 : Packaged on tape and reel only. Check packaging specification.
Note 3 : Slight discoloration in color of the plastic compounds does not affect form, fit or function of the connector.
Note 4 : After reflow, the terminal plating may change color, however this does not represent a quality issue.
All dimensions: mm
Part Number
CL No.
Number of contacts
A
B
C
D
E
FH36-15S-0.3SHW(50)
FH36-17S-0.3SHW(50)
FH36-19S-0.3SHW(50)
FH36-25S-0.3SHW(50)
FH36-29S-0.3SHW(50)
FH36-33S-0.3SHW(50)
FH36-35S-0.3SHW(50)
FH36-45S-0.3SHW(50)
FH36-51S-0.3SHW(50)
FH36-61S-0.3SHW(50)
FH36W-11S-0.3SHW(50)
FH36W-15S-0.3SHW(50)
FH36W-17S-0.3SHW(50)
FH36W-19S-0.3SHW(50)
FH36W-23S-0.3SHW(50)
FH36W-27S-0.3SHW(50)
FH36W-31S-0.3SHW(50)
FH36W-33S-0.3SHW(50)
FH36W-39S-0.3SHW(50)
FH36W-51S-0.3SHW(50)
FH36W-61S-0.3SHW(50)
580-1618-8-50
580-1606-9-50
580-1607-1-50
580-1619-0-50
580-1613-4-50
580-1615-0-50
580-1604-3-50
580-1617-5-50
580-1601-5-50
580-1600-2-50
580-1625-3-50
580-1623-8-50
580-1616-2-50
580-1612-1-50
580-1614-7-50
580-1608-4-50
580-1609-7-50
580-1622-5-50
580-1620-0-50
580-1605-6-50
580-1611-9-50
15
17
19
25
29
33
35
45
51
61
11
15
17
19
23
27
31
33
39
51
61
6.1
6.7
7.3
3.6
4.2
4.8
6.6
7.8
9
9.6
12.6
14.4
17.4
2.4
3.6
4.2
4.8
6
4.2
4.8
5.4
7.2
8.4
9.6
10.2
13.2
15
4.83
5.43
6.03
7.83
9.03
10.23
10.83
13.83
15.63
18.63
3.63
4.83
5.43
6.03
7.23
8.43
9.63
10.23
12.03
15.63
18.63
5.59
6.19
6.79
8.59
9.79
10.99
11.59
14.59
16.39
19.39
4.39
9.1
10.3
11.5
12.1
15.1
16.9
19.9
4.9
6.1
6.7
7.3
8.5
18
3
4.2
4.8
5.4
6.6
7.8
9
9.6
11.4
15
5.59
6.19
6.79
7.99
9.7
7.2
8.4
9
10.8
14.4
17.4
9.19
10.9
11.5
13.3
16.9
19.9
10.39
10.99
12.79
16.39
19.39
18
Tape and reel packaging (5,000 pieces/reel).
Order by number of reels.
3
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH36 Series■0.3 mm Pitch, 1.0 mm above the board Flexible Printed Circuit ZIF Connectors
■Recommended PCB mounting pattern and metal mask dimensions
(Recommended metal mask thickness: t=0.1)
B
0.05
0.6 0.05
0.3 0.03
(0.23:Metal mask)
0.3 0.05
0.3 0.05
0.6 0.05
(0.3:Metal mask)
0.4 0.05
0.3 0.03
(0.23:Metal mask)
C
0.05
0.535 0.05
■Recommended FPC Dimensions
Detail R
(Lead plated 0.1 MAX)
F
G
H
C
0.1
(0.07)
0.1
0.05
0.03
0.3 0.07
0.3 0.07
0.6 0.02
0.3 0.02
+0.04
0.3
–0.03
0.2 0.03
disengagement shift
S
R
B
A
Detail S
0.1 0.02
MAX R0.2
(0.2)
+0.04
0.3
–0.03
R0.2 0.05
R0.2 0.1
0.9 0.2
B
J
0.03
0.05
0.9 0.2
R0.2 0.05
(R0.2)
(R0.2)
R0.2 0.05
All dimensions: mm
Part Number
CL No.
Number of contacts
B
C
F
G
H
J
FH36-15S-0.3SHW(50)
FH36-17S-0.3SHW(50)
FH36-19S-0.3SHW(50)
FH36-25S-0.3SHW(50)
FH36-29S-0.3SHW(50)
FH36-33S-0.3SHW(50)
FH36-35S-0.3SHW(50)
FH36-45S-0.3SHW(50)
FH36-51S-0.3SHW(50)
FH36-61S-0.3SHW(50)
FH36W-11S-0.3SHW(50)
FH36W-15S-0.3SHW(50)
FH36W-17S-0.3SHW(50)
FH36W-19S-0.3SHW(50)
FH36W-23S-0.3SHW(50)
FH36W-27S-0.3SHW(50)
FH36W-31S-0.3SHW(50)
FH36W-33S-0.3SHW(50)
FH36W-39S-0.3SHW(50)
FH36W-51S-0.3SHW(50)
FH36W-61S-0.3SHW(50)
580-1618-8-50
580-1606-9-50
580-1607-1-50
580-1619-0-50
580-1613-4-50
580-1615-0-50
580-1604-3-50
580-1617-5-50
580-1601-5-50
580-1600-2-50
580-1625-3-50
580-1623-8-50
580-1616-2-50
580-1612-1-50
580-1614-7-50
580-1608-4-50
580-1609-7-50
580-1622-5-50
580-1620-0-50
580-1605-6-50
580-1611-9-50
15
17
19
25
29
33
35
45
51
61
11
15
17
19
23
27
31
33
39
51
61
3.6
4.2
4.8
6.6
7.8
9
9.6
12.6
14.4
17.4
2.4
3.6
4.2
4.8
6
4.2
4.8
5.4
7.2
8.4
9.6
10.2
13.2
15
6.04
6.64
7.24
9.04
10.24
11.44
12.04
15.04
16.84
19.84
4.84
5.6
6.2
6.8
8.6
9.8
11
11.6
14.6
16.4
19.4
4.4
5.6
6.2
6.8
8
9.2
10.4
11
12.8
16.4
19.4
4.8
5.4
6
7.8
9
4.6
5.2
5.8
7.6
8.8
10
10.6
13.6
15.4
18.4
3.4
4.6
5.2
5.8
7
10.2
10.8
13.8
15.6
18.6
3.6
4.8
5.4
6
7.2
8.4
9.6
10.2
12
18
3
4.2
4.8
5.4
6.6
7.8
9
9.6
11.4
15
6.04
6.64
7.24
8.44
7.2
8.4
9
10.8
14.4
17.4
9.64
8.2
9.4
10
11.8
15.4
18.4
10.84
11.44
13.24
16.84
19.84
15.6
18.6
18
4
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH36 Series■0.3 mm Pitch, 1.0 mm above the board Flexible Printed Circuit ZIF Connectors
■Recommended FPC construction
■Contact FPC manufacturer for specific details.
1. Using Single-sided FPC
Material Thickness
Material Name
Material
(µm)
(25)
(25)
Connecting side
Covering film layer
Cover adhesive
Polyamide 1 mil thick.
0.2µm thick gold plated over 1 to 5µm
thick nickel underplating
Surface treatment
Copper foil
3
35
25
25
40
75
203
Cu
1oz
Base adhesive
Base film
Thermosetting adhesive
Polyamide 1 mil thick
Reinforcement material adhesive Thermosetting adhesive
Stiffener
Polyamide 3 mil thick
Total
Back side
2. Using Double-sided FPC
Material Thickness
(µm)
Material Name
Material
Connecting side
Polyamide 1 mil thick
Covering layer film
Cover adhesive
Surface treatment
Through-hole copper
Copper foil
(25)
(25)
3
0.2µm thick gold plated over 1 to 5µm
thick nickel underplating
Cu
15
Cu
1/2oz
18
Thermosetting adhesive
Polyamide 1 mil thick
Thermosetting adhesive
Base adhesive
Base film
18
25
Base adhesive
Copper foil
18
(18)
25
Cu
1/2oz
Cover adhesive
Covering film layer
Reinforcement material adhesive
Stiffener
Thermosetting adhesive
Polyamide 1 mil thick
Thermosetting adhesive
Polyamide 1 mil thick
Total
25
25
25
Back side
197
*
To prevent release of the FPC due to its bending, use of the double sided FPC with copper foil on the back side is NOT RECOMMENDED.
3.Precautions
1. This specification is a recommendation for the construction of the FH36 Series FPC (t=0.2 ± 0.03)
2. For details about the construction, please contact the FPC manufacturers.
5
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH36 Series■0.3 mm Pitch, 1.0 mm above the board Flexible Printed Circuit ZIF Connectors
■Packaging Specification
■Embossed Carrier Tape Dimensions
(Tape width of 24mm max.)
■Embossed Carrier Tape Dimensions
Flat surface, for placement
with automatic equipment.
(Tape width of 32mm min.)
(1.5)
(0.3)
4
0.1 2 0.15
8
0.1
4
0.1
2
0.15
8 0.1
(1.5)
(0.3)
(2.95)
(3.85)
1.5 +0.1
Flat surface, for placement
with automatic equipment.
0
(1)
Unreeling direction
■Reel Dimensions
(P:INSIDE)
(Q:OUTSIDE)
End section
Mounting section
Lead section (400mm min.)
Embossed carrier tape
No connector inserted
No connector inserted
Top cover tape
(25 pockets min.)
(25 pockets min.)
All dimensions: mm
Part Number
CL No.
Number of contacts
K
L
M
N
P
Q
FH36-15S-0.3SHW(50)
FH36-17S-0.3SHW(50)
FH36-19S-0.3SHW(50)
FH36-25S-0.3SHW(50)
FH36-29S-0.3SHW(50)
FH36-33S-0.3SHW(50)
FH36-35S-0.3SHW(50)
FH36-45S-0.3SHW(50)
FH36-51S-0.3SHW(50)
FH36-61S-0.3SHW(50)
FH36W-11S-0.3SHW(50)
FH36W-15S-0.3SHW(50)
FH36W-17S-0.3SHW(50)
FH36W-19S-0.3SHW(50)
FH36W-23S-0.3SHW(50)
FH36W-27S-0.3SHW(50)
FH36W-31S-0.3SHW(50)
FH36W-33S-0.3SHW(50)
FH36W-39S-0.3SHW(50)
FH36W-51S-0.3SHW(50)
FH36W-61S-0.3SHW(50)
580-1618-8-50
580-1606-9-50
580-1607-1-50
580-1619-0-50
580-1613-4-50
580-1615-0-50
580-1604-3-50
580-1617-5-50
580-1601-5-50
580-1600-2-50
580-1625-3-50
580-1623-8-50
580-1616-2-50
580-1612-1-50
580-1614-7-50
580-1608-4-50
580-1609-7-50
580-1622-5-50
580-1620-0-50
580-1605-6-50
580-1611-9-50
15
17
19
25
29
33
35
45
51
61
11
15
17
19
23
27
31
33
39
51
61
16
16
16
24
24
24
24
24
32
32
16
16
16
16
24
24
24
24
24
32
32
Å|
Å|
Å|
Å|
Å|
Å|
Å|
Å|
28.4
28.4
Å|
Å|
Å|
Å|
Å|
Å|
Å|
7.5
7.5
7.5
6.3
6.9
7.5
17.4
17.4
17.4
25.4
25.4
25.4
25.4
25.4
33.4
33.4
17.4
17.4
17.4
17.4
25.4
25.4
25.4
25.4
25.4
33.4
33.4
21.4
21.4
21.4
29.4
29.4
29.4
29.4
29.4
37.4
37.4
21.4
21.4
21.4
21.4
29.4
29.4
29.4
29.4
29.4
37.4
37.4
11.5
11.5
11.5
11.5
11.5
14.2
14.2
7.5
7.5
7.5
7.5
11.5
11.5
11.5
11.5
11.5
14.2
14.2
9.3
10.5
11.7
12.3
15.3
17.1
20.1
5.1
6.3
6.9
7.5
8.7
9.9
11.1
11.7
13.5
17.1
20.1
Å|
Å|
28.4
28.4
6
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH36 Series■0.3 mm Pitch, 1.0 mm above the board Flexible Printed Circuit ZIF Connectors
■Temperature Profile
■Using Lead-free Solder Paste
MAX 250ç
HRS test condition
Solder method
Environment
:Reflow, IR/hot air
:Room air
250
200
150
100
50
230ç
Solder composition :Paste, 96.5%Sn/3.0%Ag/0.5%Cu
(Senju Metal Industry, Co., Ltd.'s
200ç
(ç)
Part Number:M705-221CM5-32-10.5)
Test board
Land dimensions :0.3mm∞0.6mm, 0.3mm∞0.8mm
Metal mask :0.23∞0.5, 0.23∞0.65∞0.1mm thick
:Glass epoxy 25mm∞50mm∞0.8mm thick
150ç
The temperature profiles shown are based on the above
conditions.
In individual applications the actual temperature may vary,
depending on solder paste type, volume / thickness and board
size / thickness. Consult your solder paste and equipment
manufacturer for specific recommendations.
25ç
(60sec.) 90 sec. to 120 sec.
Preheating
(60sec.)
Soldering
0
Start
Time (Seconds)
7
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH36 Series■0.3 mm Pitch, 1.0 mm above the board Flexible Printed Circuit ZIF Connectors
■Operation and Precautions
Operation
1. FPC insertion procedure. Connector installed on the board.
1
Lift up the actuator.
Use thumb or index finger.
2
Insert the FPC (contact surfaces facing down) at angle of
approximately 10° to the board surface ①, making sure that
the FPC positioning tabs clear the protrusions on both sides
of the connector. Lower the FPC down ②, parallel to the
board surface.
FPC contact surface
faces downward
①
②
Protrusions for
the FPC positioning.
3
Rotate down the actuator until firmly closed.
2. FPC removal
1 Lift up the actuator
Pull up the FPC at an angle of approximately 10° ① and than with-
drew it from the connector ②.
②
①
Protrusions for FPC positioning
8
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH36 Series■0.3 mm Pitch, 1.0 mm above the board Flexible Printed Circuit ZIF Connectors
Precautions
Exercise care when handling connectors. Follow recommendations given below.
[
]
Precautions when mounting connectors on the PCB
■Handling before mounting on PCB
Insertion of the FPC or operation of the actuator prior to mounting on the PCB is NOT RECOMMENDED.
■PC board warpage
Minimize the warpage as much as possible. The connector is straight within 0.1 mm max. Make sure that the mount-
ing area flatness can accept the connector terminals without causing any failure of the solder joints.
■When braking the large PC board into individual boards exercise care NOT to damage the installed connectors.
■When attaching the boards or other components with the screws make sure that any stresses will NOT cause
board deflections affecting the mounting areas of the connector.
■Bending of the board
For a board width of 100 mm, bending of the board must be 0.5 mm max. (Ref to Fig. 1)
100
Connector
F
Board
Connector
Board
F
Fig. 1
100
[
]
Precautions during FPC insertion and mating
Pay attention to the following points when inserting FPC.
■Actuator operation
1
Do not apply excessive force when opening the actuator prior to FPC insertion. When opening make sure that
the force is applied only to the actuator itself, avoiding touching of the contacts.
Actuator
Damage to the actuator
Damage to the actuator
2
Axis of rotation
Assure free rotation of the actuator.
9
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH36 Series■0.3 mm Pitch, 1.0 mm above the board Flexible Printed Circuit ZIF Connectors
Precautions
3
The actuator will rotate 125ç. Do not apply force to rotate further.
4
When opening or closing the actuator, do so at the cen-
ter section.
5
Do not grasp or and lift the actuator (Fig. 3) nor insert the nail
from the back of it (Fig. 4).
Fig. 3
Fig. 4
■FPC insertion
Do not insert the FPC at any high angle from above.
Protrusions for FPC positioning
10
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH36 Series■0.3 mm Pitch, 1.0 mm above the board Flexible Printed Circuit ZIF Connectors
Precautions
As illustrated (Fig. 5) angle insertion may cause electrical discontinuity when the FPC is deflected in use.
Opening of the FPC pattern
Fig. 5
• To avert insertion of the FPC at an angle, consideration should be given to securing enough insertion space
when designing the board lay-out. Insertion will be difficult when the FPC is too short.
• Contact FPC manufacturer for information about the bending specifications.
■Verification of the fully closed actuator
The FPC should be fully inserted, with its positioning tabs fully behind the protrusions on both sides of the con-
nector’s insertion slot (Fig. 6).
FPC positioning tab
Protrusions FPC positioning
Fig. 6
[
]
Routing of the FPC (FPC fully inserted / actuator closed)
■Do not apply any pull or upward-directed force to the FPC.
Do not make any sharp bends of FPC close to the immediate exit from the connector (Fig. 7)
Fig. 7
11
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH36 Series■0.3 mm Pitch, 1.0 mm above the board Flexible Printed Circuit ZIF Connectors
Precautions
[
]
Removing of the FPC
■Rotate the actuator to the fully open position (max. angle of 125ç)
Lift the FPC approximately 10ç (making sure that the positioning tabs clear the protrusions on both sides) and
carefully withdraw it from the connector.
Protrusions for FPC positioning
[
]
Other Precautions
■Hand Soldering Precautions
When hand soldering:
1
2
3
Do not perform reflow or hand soldering with the FPC inserted in the connector.
Do not apply excessive heat or touch the soldering iron anywhere other than the connector leads.
Do not use excessive amount of solder or flux compounds.
Operation of the actuator or contacts may be affected by excessive amounts of solder or flux compounds.
®
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: 81-3-3491-5300, FAX: 81-3-3495-5230
http://www.hirose.com
http://www.hirose-connectors.com
The contents of this catalog are current as of date of 09/2010. Contents are subject to change without notice for the purpose of improvements.
12
相关型号:
FH36W-39S-0.3SHW(50)
Card Edge Connector, 39 Contact(s), 1 Row(s), Female, Right Angle, 0.012 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator, HALOGEN FREE
HRS
FH36W-39S-0.3SHW(99)
Card Edge Connector, 39 Contact(s), 1 Row(s), Right Angle, 0.012 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator
HRS
©2020 ICPDF网 联系我们和版权申明