FX1-216P-1.27DSA [HRS]
1.27mm Pitch Connector; 1.27mm间距连接器型号: | FX1-216P-1.27DSA |
厂家: | HRS |
描述: | 1.27mm Pitch Connector |
文件: | 总8页 (文件大小:337K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
1.27mm Pitch Connector
FX1 Series
DIN duplex density mount has been achieved.
(DIN 96 contacts and FX1 192 (96x2)
Photo 1
ꢀFeatures
1. High density and space saved-DIN Duplex Mount Achieved
Figure 2
Sequence Structure
(Pin contact sequence)
The alignment of the mating area in 4-row allows to duplex the
number of contacts in the nearly equivalent mount square as for
the conventional DIN connector.(Refer to photo (1).)
2. High Current and High Voltage
Two-thirds of total contact numbers are used for half pitch
signaling contact, while the other one-third thereof is used for the
power ground contact. Power ground contact corresponds to
high current (1A) and high voltage (250V).
3. Sequence Structure
Considering insertion/extraction in active power mode and
maintenance on the end user side, the FX series is designed in a
mechanism that can afford the time different contact at three
steps. (For details, refer to Figure (2) as shown on the right.)
FX1V (3 step sequence)
Mating
Power
Ground
Signal
Supply
Removal
*FX1 Series (2 step sequence)
4. Mis-insertion Prevent
1
2
Row B
Provide the insertion guide on both ends of connector, and widen
an inductive area in order to prevent mis-insertion.
Row A, row C
*FX1 Series (3 step sequence)
1
2
3
B1 to B4, B45 to B52, B93 to B96
B5 to B44, B53 to B92
Row A, row C
Setting row B to ground, if active cable insertion and
extraction are performed as power supply, arc will
occur between contact and contact. The row B
contact structure is constructed to separate arc
occurrence point a and normal contact point b, and
minimizes affects on the contact.
A134
ꢀProduct Specifications
Current rating
Rating Signal Contact:
Voltage rating
0.5A Signal Contact:
125V AC Operating Temperature Range-55 to 85ç (Note 1) Storage Temperature Range -10 to +60ç(Note 2)
Power Supply Contact: 1A Power Supply Contact: 250V AC Operating Humidity Range
-40 to 80%
Operating Humidity Range -40 to 70%(Note 2)
Item
Specification
Condition
1. Insulation Resistance 1000M ohms min.
250V DC
1 minute
Signal contact
Power supply contact
300V AC
600V AC
2. Withstanding Voltage No flashover or insulation breakdown.
3. Contact Resistance
4. Vibration
60m ohms max. (conductor resistance included)
100mA
No electrical discontinuity of 1µs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
Contact resistance: 70m ohms max.
Insulation resistance: 1000M ohms min.
5. Humidity (Steady state)
96 hours at temperature of 40ç and humidity of 90% to 95%
Contact resistance: 70m ohms max.
Insulation resistance: 1000M ohms min.
(-55ç: 30 minutesꢀ15- to 35ç: 5 minutes max.ꢀ
(-85ç: 30 minutesꢀ15- to 35ç: 5 minutes max.) 5 cycles
6. Temperature Cycle
7. Durability (Mating/un-mating) Contact resistance: 70 m ohms max.
500 cycles
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
ꢀMaterial
ꢀFX1 Series
Parts
Header
Material
Finish
Black
Remarks
UL94V-0
PPS
Insulator
Contact
PPS/ PTB
Receptacle
Straight header
Right angle header
Receptacle
Brass
Contact area:Gold plated
Lead area:Tin-lead plated
________
________
Phosphor bronze
Phosphor bronze
Prefixed pin
Phosphor bronze
Tin-lead plated
ꢀFXV Series
Parts
Material
Finish
Black
Remarks
UL94V-0
Header
LCP
Insulator
PPS/ PTB
Receptacle
Contact area:Gold plated
Lead area:Tin-lead plated
________
________
Contact
Phosphor bronze
Phosphor bronze
Prefixed pin
Tin-lead plated
A135
ꢀOrdering Information
ꢀFX1 Series
FX1 - 192 P - 1.27 DSA L
q
w
e
r
t
y
q Series Name
Number of contacts: 192, 216
e Connector type : P-header
: S-receptacle
: FX1
r Contact pitch: 1.27mm
w
t Contact type: DS : Right angle
DSA : Straight
y L: Board prefixed pin
Note: The cleaning type only is applied on the header side to FX1 series.
ꢀFX1V Series
FX1V A - 192 P - DSA L
q
w
e
r
t
y
q Series Name
: FX1V
r Connector type: P-header
S-receptacle
w A: Cleaning type (header side only)
Blank: No cleaning type
t Contact type: DS : Right angle
e Number of contacts : 288
DSA : Straight
y L: Board prefixed pin
Note 1. Cleaning type: the liquid escape hole is added at dip cleaning.
No cleaning type: no liquid escape hole is added at dip cleaning.
Note 2. The FX1V series omits the contact pitch.
BApplication Pattern
A136
FX1 Series
ꢀReceptacle : Right Angle Type
BPCB mounting pattern Applicable board thickness t=1.6mm
Unit: mm
Part Number
CL No.
Number of Contacts
A
B
C
D
____
FX1-144S-1.27DS
FX1-144S-1.27DSL
FX1-192S-1.27DS
FX1-192S-1.27DSL
FX1-216S-1.27DS
FX1-216S-1.27DSL
571-0003-7
571-0053-5
571-0004-0
571-0054-8
571-0005-2
571-0055-0
144
73.29
68.08
59.69
67.31
____
192
216
93.61
88.4
80.01
90.17
87.63
____
103.77
98.56
97.79
A137
ꢀHeader : Straight Type
BPCB mounting pattern Applicable board thickness t=1.6mm
Unit: mm
Part Number
FX1-144P-1.27DSA
FX1-144P-1.27DSAL
FX1-192P-1.27DSA
FX1-192P-1.27DSAL
FX1-216P-1.27DSA
FX1-216P-1.27DSAL
CL No.
Number of Contacts
A
B
D
____
571-0303-0
571-0353-9
571-0304-3
571-0354-1
571-0305-6
571-0355-4
144
73.29
59.69
69.85
____
192
216
93.61
80.01
90.17
90.17
____
103.77
100.33
A138
ꢀHeader : Right Angle Type
BPCB mounting pattern Applicable board thickness t=1.6mm
Part Number
FX1-144P-1.27DS
FX1-144P-1.27DSL
CL No.
Number of Contacts
571-0203-6
571-0253-4
144
A139
FX1V Series
ꢀReceptacle : Right Angle Type
B
PCB mounting pattern
Recommended board thickness t=1.6mm (lead length: 3mm)
Part Number
FX1V-288S-DS
FX1V-288S-DSL
CL No.
571-0606-2
571-0656-0
ꢀHeader : Straight Type
Liquid escape hole
With hole
Without hole
:
:
Cleaning type
No Cleaning type
B
PCB mounting pattern
Recommended board thickness t=1.6mm (lead length: 3.4mm)
Part Number
FX1V-288P-DSA
FX1V-288P-DSAL
FX1VA-288P-DSA
FX1VA-288P-DSAL
CL No.
571-0906-6
571-0956-4
571-1006-0
571-1056-9
A140
BPrecautions
1. Soldering
(1)In the case of manual soldering, complete services under the condition of soldering iron bit temperature below 300ç for
2 seconds max. Please be sure to coat the contacts with solder so that no force is given.
(2)In the case of dip soldering bath, complete service under the condition of soldering iron bit temperature below 260ç for
5 seconds max.
2. Prefixed function
If the prefixed function is required, please use to the board prefixed pin type.
A141
相关型号:
FX1-216P-1.27DSAL(71)
Board Connector, 216 Contact(s), 3 Row(s), Male, Straight, Solder Terminal, ROHS COMPLIANT
HRS
FX1-216S-1.27DS(71)
Board Connector, 216 Contact(s), 3 Row(s), Female, Right Angle, 0.05 inch Pitch, Solder Terminal, Locking, Black Insulator, Receptacle, ROHS COMPLIANT
HRS
©2020 ICPDF网 联系我们和版权申明