FX10A-168P-SV2(85)_技术文档

15⁺Gbps 0.5mm pitch Stacking Connectors

FX10 Series Electrical Interface for the OIF 100G Long-Haul DWDM Transmission Module (MSA-100GLH)

■Mechanical Features

● 0.5mm Pitch

●

Stacking height : 4 to 8mm (2-piece type)

8 to 13mm (3-piece type)

● Number of Contacts

With ground plate : 80 / 100 / 120 / 140

Without ground plate : 96 / 120 / 144 / 168

3-piece interposer : 120 / 144 /168

● OIF MSA-100GLH Electrical Interface

FX10A-168P/S-SV(83) assembly is specified for the

OIF 100G Long-Haul DWDM Transmission Module

host line card - MSA-100GLH electrical connector.

■With GND Plate Type

Ground

plate

● Suited to High-Density Applications

Signal contact

The 0.5 mm signal contact pitch provides a smaller

overall connector, using less mounting area on the board.

Housing

● Optional Ground Plate

Metal fitting

An alternate style without the ground plate is available.

The space provided by the ground plate removal has

been filled with additional signal contacts.

<3-piece type>

Ground plate and metal

fitting make contact

●Floating Interposer

●Smooth floating with high speed transmission

capability supported by unique 3-piece floating

system

●Multiple connectors are allowed on the same PCB

(Allowable Mis-alignment Range :

direction)

0.3mm in Xꢀ

■Signal Integrity Features

115

110

105

100

95

60

●Insertion-Loss-to-Crosstalk-Ratio(ICR)

The insertion-loss-to-crosstalk-ratio (ICR) with

five-aggressor differential FEXT meets the

extrapolated IEEE 802.3ap specification for

50

40

30

20

10

0

+

15 Gbps.

●Differential Impedance

85ø configuration and 100ø configuration are

available.

90

ICR

ICR spec

S(3,3)

85

0

2

4

6

8

10

0

200

400

600

800

1000

Frequency (GHz)

Time (ps)

■Stack Height

●2-piece type

●With ground plate

●Without ground plate

Headers

FX10#-xP/x-SV

FX10#–xP/x–SV1

FX10#-xP-SV FX10–xP–SV1 FX10#-xP-SV2

FX10#-xP-SV3

FX10#-xP-SV4

Receptacles

FX10#-*S/*-SV

4mm

5mm

4mm

5mm

6mm

7mm

8mm

FX10#-*S-SV

●3-piece type

Stacking Height Header (Mating side)

Interposer

Header(Fixed side)

FX10#-xP-SV

FX10#-xP-SV1

8mm

9mm

FX10#-xP-SV

FX10#-xP-SV1

FX10#-xP-SV2

FX10#-xP-SV3

FX10#-xP-SV4

FX10-xIP-xD(Q)-8H

FX10-xIP-xD(Q)-8PH

10mm

11mm

12mm

13mm

(H) : Reference dimension

1

2016.12r

FX10 Series●15⁺Gbps 0.5mm pitch Stacking Connectors

■General Product Specifications (2 piece type)

Rated

current

Rated

Operating temperature

range

Storage

temperature range

Storage humidity

range

-10 to +60ç

(Note 2)

40 to 70%

(Note 2)

0.3 A

-55 to 85ç (Note 1)

Rating

Operating humidity

range

Relative humidity 95% max

(No condensation)

50 V AC

voltage

Item

Requirements

Conditions

1. Insulation resistance 100Mø min

Measured at 100 V DC

2. Voltage resistance No flashover or breakdown

3. Contact resistance 60mø max

150 V AC applied for 1 minute

Measured at 100 mA

4. Vibration resistance No electrical discontinuity for 1µs or greater

No damage, cracks, or parts looseness

Frequency : 10 to 55 Hz, amplitude of 0.75 mm

in 3 axis directions, 10 cycles each.

Acceleration of 490 m/s , 11ms duration, sine

half-wave waveform, for 3 cycles in both directions

of each of the 3 axes

2

5. Shock resistance

No electrical discontinuity for 1µs or greater

No damage, cracks, or parts looseness

6. Damp heat

(Steady state)

Contact resistance of 70mø max, insulation

resistance of

100Mø min, no damage, cracks, or parts

looseness

Temperature of 40ç, humidity of 90 to 95%,

duration 96 h

7. Temperature cycle Contact resistance of 70mø max, insulation

Temperature : -55ç → 15 to 35ç → 85ç → 15 to 35ç

Time : 30 min. → 2 to 3 min. → 30 min. → 2 to 3 min.

for 5 cycles

resistance of

100Mø min, no damage, cracks, or parts

looseness

8. Mating Cycles

Contact resistance of 70mø max

No damage, cracks, or parts looseness

No melting of resin portion which affects

performance

50 times

9. Resistance to

soldering heat

Reflow : At the recommended temperature profile

Soldering iron temperature : 360ç for 5 seconds

Note 1 : Includes temperature rise caused by current flow.

Note 2 : The term storage refers to unused products kept for a long time prior to board mounting. Operating temperature

and humidity range are applicable to the non-conducting state after board assembly.

Note 3 : Information contained in this catalog represents general requirements for this series. Contact us for the drawings and

specifications for a specific part number shown.

■Materials / Finish

Part

Material

LCP

Finish

Beige

Notes

UL94V-0

Insulator

Contact Area: Gold plating

Lead Area: Tin plating

Contact Area: Gold plating

Lead Area: Flash plating

Tin plating

Header

Contacts

Phosphor bronze

Receptacle

Ground plate

Metal fitting

Phosphor bronze

Tin plating

Product Number Structure

■

Refer to the chart below when determining the product specifications from the product number.

Please select from the product numbers listed in this catalog when placing orders.

(

)

-

**

FX10 # * P / * SV 1

q

w

r

t

y

u

e

q

w

r

Series name : FX10

A : With guide post

Connector type

P : Header

B : Without guide post

S : Receptacle

Mounting style

t

y

e Number of contacts

SV : Straight SMT

Product height

With ground plate

Signal/Ground : 80/8, 100/10, 120/12,

140/14

Blank : Standard

1

: Standard + 1mm

u Packaging options

Without ground plate

Signal : 96, 120, 144, 168

Blank, (71) : Tray packaging

(21), (91) : Embossed tape packaging

2

FX10 Series●15⁺Gbps 0.5mm pitch Stacking Connectors

■Headers without ground plate

●4mm Stacking Height

A± ±0.

(

)

±05

±0. ± ±0±5

B± ±03

.-(Øꢀ)

Guidepost

C± ±0ꢀ

Unit : mm

Remarks

No. of Contacts

Signal

96

Part No.

HRS No.

A

B

C

D

E

F

FX10A-96P-SV(**)

FX10A-120P-SV(**)

FX10A-144P-SV(**)

FX10A-168P-SV(**)

FX10A-96P-SV1(**)

FX10A-120P-SV1(**)

FX10A-144P-SV1(**)

FX10A-168P-SV1(**)

FX10A-120P-SV2(**)

FX10A-144P-SV2(**)

FX10A-168P-SV2(**)

FX10A-120P-SV3(**)

FX10A-144P-SV3(**)

FX10A-168P-SV3(**)

FX10A-120P-SV4(**)

FX10A-144P-SV4(**)

FX10A-168P-SV4(**)

FX10B-96P-SV(**)

FX10B-120P-SV(**)

FX10B-144P-SV(**)

FX10B-168P-SV(**)

FX10B-96P-SV1(**)

FX10B-120P-SV1(**)

FX10B-144P-SV1(**)

FX10B-168P-SV1(**)

FX10B-168P-SV2(**)

FX10B-168P-SV3(**)

FX10B-144P-SV4(**)

FX10B-168P-SV4(**)

570-0041-0 **

570-0042-2 **

570-0043-5 **

570-0044-8 **

570-0141-4 **

570-0142-7 **

570-0143-0 **

570-0144-2 **

570-0059-5 **

570-0056-7 **

570-0302-1 **

570-0060-4 **

570-0057-0 **

570-0304-7 **

570-0061-7 **

570-0058-2 **

570-0306-2 **

570-0051-3 **

570-0052-6 **

570-0053-9 **

570-0054-1 **

570-0151-8 **

570-0152-0 **

570-0153-3 **

570-0154-6 **

570-0303-4 **

570-0305-0 **

570-0063-0 **

570-0307-5 **

23.5

29.5

35.5

41.5

23.5

29.5

35.5

41.5

29.5

35.5

41.5

29.5

35.5

41.5

29.5

35.5

41.5

23.5

29.5

35.5

41.5

23.5

29.5

35.5

41.5

35.5

41.5

31.1

37.1

43.1

49.1

31.1

37.1

43.1

49.1

37.1

43.1

49.1

37.1

43.1

49.1

37.1

43.1

49.1

31.1

37.1

43.1

49.1

31.1

37.1

43.1

49.1

43.1

49.1

26.4

32.4

38.4

44.4

26.4

32.4

38.4

44.4

32.4

38.4

44.4

32.4

38.4

44.4

32.4

38.4

44.4

—

31.5

37.5

43.5

49.5

31.5

37.5

43.5

49.5

37.5

43.5

49.5

37.5

43.5

49.5

37.5

43.5

49.5

31.5

37.5

43.5

49.5

31.5

37.5

43.5

49.5

43.5

49.5

28.3

34.3

40.3

46.3

28.3

34.3

40.3

46.3

34.3

40.3

46.3

34.3

40.3

46.3

34.3

40.3

46.3

28.3

34.3

40.3

46.3

28.3

34.3

40.3

46.3

40.3

46.3

120

144

168

96

3.5

120

144

168

120

144

168

120

144

168

120

144

168

96

120

144

168

96

120

144

168

144

168

4.5

With

guideposts

5.25

6.25

7.25

—

3.5

—

Without

guideposts

—

4.5

—

5.25

6.25

—

7.25

—

[Specifications number]-**, (**)

(71) : Tray packaging / AuP 0.1µm

(83) : Embossed tape packaging 1RL : 1000pcs / AuP 0.76µm

(85) : Embossed tape packaging 1RL : 250pcs / AuP 0.76µm

(91) : Embossed tape packaging 1RL : 1000pcs / AuP 0.1µm

(93) : Tray packaging / AuP 0.76µm

Note 1: There is no polarity with respect to board mounting for this product.

Note 2: The coplanarity of this product's SMT leads is 0.1mm or less.

Note 3: Please order embossed tape packaged items by the reel.

■Board-to-Board Distance

BRecommended PCB Layout

HEADER CONNECTOR

Dimensions (Metal mask)

FX10A(B)-168P-SV*(83)

SOLDER

3

PCB

Recommended metal mask thickness : 0.15mm

E^+±0ꢀ

±

F _-±0ꢀ

. Øꢀ0. ± ±0±5

C± ±0±5

A ± ±0±5

PCB

. Øꢀ0ꢀ ± ±0±5

ꢀ045± ±0±5

±05 ± ±0±3

RECEPTACLE CONNECTOR

FX10A(B)-168S-SV(83)

SOLDER

3

FX10A(B)-168S-SV(83)

1

2

(A)

B

FX10A(B)-168P-SV(83)

4

4.3 0.127

5.3 0.127

6.0 0.127

7.0 0.127

8.0 0.127

±03± ±0±3(ꢅꢂꢆd)

±0.5± ±0±3(ꢁetꢂa ꢃꢂsꢄ)

FX10A(B)-168P-SV1(83)

FX10A(B)-168P-SV2(83)

FX10A(B)-168P-SV3(83)

FX10A(B)-168P-SV4(83)

5

6

7

8

Note

The cross-hatched area

inside the SMT land

1

may come into contact with the connector contacts

and thus care should be taken that the pattern

does not extend beyond the SMT land width.

Not required in products without guideposts.

1

2

3

Note

Stacking height from lead to lead (reference dimensions)

Board-to-board distance

Stencil (metal mask) shall be based on Hirose's

recommended aperture and thickness.

2

3

FX10 Series●15⁺Gbps 0.5mm pitch Stacking Connectors

■Receptacles without ground plate

A± ±0.

(±05 )

±0. ± ±0±5

B± ±03

.-(Øꢀ)

C± ±0ꢀ

Guidepost

Unit : mm

No. of Contacts

Signal

96

Part No.

HRS No.

A

B

C

D

E

Remarks

FX10A-96S-SV(**)

FX10A-120S-SV(**)

FX10A-144S-SV(**)

FX10A-168S-SV(**)

FX10B-96S-SV(**)

FX10B-120S-SV(**)

FX10B-144S-SV(**)

FX10B-168S-SV(**)

570-0241-9 **

570-0242-1 **

570-0243-4 **

570-0244-7 **

570-0251-2 **

570-0252-5 **

570-0253-8 **

570-0254-0 **

23.5

29.5

35.5

41.5

23.5

29.5

35.5

41.5

31.1

37.1

43.1

49.1

31.1

37.1

43.1

49.1

26.4

31.5

37.5

43.5

49.5

31.5

37.5

43.5

49.5

28.3

34.3

40.3

46.3

28.3

34.3

40.3

46.3

120

144

168

96

32.4

38.4

44.4

26.4

32.4

38.4

44.4

With

guideposts

120

144

168

Without

guideposts

[Specifications number] -✽ ✽, (✽ ✽)

Blank: Tray packaging / AuP 0.1µm

(21) : Embossed tape packaging 1RL : 1000pcs / AuP 0.1µm

(83) : Embossed tape packaging 1RL : 1000pcs / AuP 0.76µm

(84) : Embossed tape packaging 1RL : 500pcs / AuP 0.76µm

(85) : Embossed tape packaging 1RL : 250pcs / AuP 0.76µm

(93) : Tray packaging / AuP 0.76µm

Note 1 : There is no polarity with respect to board mounting for this product.

Note 2 : The coplanarity of this product's SMT leads is 0.1mm or less.

Note 3 : Please order embossed tape packaged items by the reel.

Note 4 : Using multiple connectors between two boards is not recommended.

BRecommended PCB Layout Dimensions (Metal mask)

Recommended metal mask thickness : 0.15mm

D^+±0ꢀ

±

E_-±0ꢀ

C± ±0±5

A± ±0±5

Øꢀ0.± ±0±5

ꢀ

Øꢀ0ꢀ± ±0±5

±05± ±0±3

ꢀ

±03± ±0±3(ꢅꢂꢆd)

ꢀ045± ±0±5

±0.5± ±0±3(ꢁetꢂa ꢃꢂsꢄ)

1

Note

Not required in products without guideposts.

4

FX10 Series●15⁺Gbps 0.5mm pitch Stacking Connectors

■Headers with ground plate

●4mm Stacking Height

Unit : mm

No.of Contacts

Signal Ground

Part No.

HRS No.

A

B

C

D

E

F

Remarks

FX10A-80P/8-SV(**)

FX10A-100P/10-SV(**)

FX10A-120P/12-SV(**)

FX10A-140P/14-SV(**)

FX10B-80P/8-SV(**)

FX10B-100P/10-SV(**)

FX10B-120P/12-SV(**)

FX10B-140P/14-SV(**)

570-0001-5 **

570-0002-8 **

570-0003-0 **

570-0004-3 **

570-0021-2 **

570-0022-5 **

570-0023-8 **

570-0024-0 **

80

8

23.5 18 31.1 26.4 31.5 28.3

29.5 24 37.1 32.4 37.5 34.3

35.5 30 43.1 38.4 43.5 40.3

41.5 36 49.1 44.4 49.5 46.3

100

120

140

80

10

12

14

8

With

guideposts

23.5 18 31.1

29.5 24 37.1

35.5 30 43.1

41.5 36 49.1

—

31.5 28.3

37.5 34.3

43.5 40.3

49.5 46.3

100

120

140

10

12

14

Without

guideposts

[Specifications number] -✽ ✽, (✽ ✽)

(71) : Tray packaging

(91) : Embossed tape packaging

Note 1 : There is no polarity with respect to board mounting for this product.

Note 2 : The coplanarity of this product's SMT leads is 0.1mm or less.

Note 3 : Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)

Note 4 : Using multiple connectors between identical boards is not recommended.

BRecommended PCB Layout Dimensions (Metal mask)

Recommended metal mask thickness : 0.15mm

1

2

3

Note

Cross-hatched portions, totaling n places, indicate the ground circuits.

Cross-hatched portions, 2 places on both sides, indicate the metal fittings.

The cross-hatched area

inside the SMT land may come into contact with the connector contacts

and thus care should be taken that the pattern does not extend beyond the SMT land width.

Not required in products without guideposts.

4

5

FX10 Series●15⁺Gbps 0.5mm pitch Stacking Connectors

■Headers with ground plate

●5mm Stacking Height

A

0.2

(0.5)

0.5 0.05

0.2 0.05

(0.75)

(6)

B

C

0.2

0.ꢁ

2-(Øꢀ)

D

0.ꢀ

Guidepost

Unit : mm

No. of Contacts

Signal Ground

Part No.

HRS No.

A

B

C

D

E

F

Remarks

FX10A-80P/8-SV1(**)

FX10A-100P/10-SV1(**)

FX10A-120P/12-SV1(**)

FX10A-140P/14-SV1(**)

FX10B-80P/8-SV1(**)

FX10B-100P/10-SV1(**)

FX10B-120P/12-SV1(**)

FX10B-140P/14-SV1(**)

570-0101-0 **

570-0102-2 **

570-0103-5 **

570-0104-8 **

570-0121-7 **

570-0122-0 **

570-0123-2 **

570-0124-5 **

80

8

23.5 18 31.1 26.4 31.5 28.3

29.5 24 37.1 32.4 37.5 34.3

35.5 30 43.1 38.4 43.5 40.3

41.5 36 49.1 44.4 49.5 46.3

100

120

140

80

10

12

14

8

With

guideposts

23.5 18 31.1

29.5 24 37.1

35.5 30 43.1

41.5 36 49.1

—

31.5 28.3

37.5 34.3

43.5 40.3

49.5 46.3

100

120

140

10

12

14

Without

guideposts

[Specifications number] -✽ ✽, (✽ ✽)

(71) : Tray packaging

(91) : Embossed tape packaging

Note 1 : There is no polarity with respect to board mounting for this product.

Note 2 : The coplanarity of this product's SMT leads is 0.1mm or less.

Note 3 : Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)

Note 4 : Using multiple connectors between identical boards is not recommended.

BRecommended PCB Layout Dimensions (Metal mask)

Recommended metal mask thickness : 0.15mm

1

2

3

Note

Cross-hatched portions, totaling n places, indicate the ground circuits.

Cross-hatched portions, 2 places on both sides, indicate the metal fittings.

The cross-hatched area

inside the SMT land may come into contact with the connector contacts

and thus care should be taken that the pattern does not extend beyond the SMT land width.

Not required in products without guideposts.

4

6

FX10 Series●15⁺Gbps 0.5mm pitch Stacking Connectors

■Receptacles with ground plate

A

0.2

(0.5)

0.5 0.05

0.2 0.05

(0.75)

(6)

B

C

0.2

0.ꢀ

2-(Ø1)

Guidepost

D

0.1

Unit : mm

No. of Contacts

Signal Ground

Part No.

HRS No.

A

B

C

D

E

F

Remarks

FX10A-80S/8-SV(**)

570-0201-4 **

80

100

120

140

80

8

10

12

14

8

23.5 18 31.1 26.4 31.5 28.3

29.5 24 37.1 32.4 37.5 34.3

35.5 30 43.1 38.4 43.5 40.3

41.5 36 49.1 44.4 49.5 46.3

FX10A-100S/10-SV(**) 570-0202-7 **

FX10A-120S/12-SV(**) 570-0203-0 **

FX10A-140S/14-SV(**) 570-0204-2 **

With

guideposts

FX10B-80S/8-SV(**)

570-0221-1 **

23.5 18 31.1

29.5 24 37.1

35.5 30 43.1

41.5 36 49.1

—

31.5 28.3

37.5 34.3

43.5 40.3

49.5 46.3

FX10B-100S/10-SV(**) 570-0222-4 **

FX10B-120S/12-SV(**) 570-0223-7 **

FX10B-140S/14-SV(**) 570-0224-0 **

100

120

140

10

12

14

Without

guideposts

[Specifications number] -✽ ✽, (✽ ✽)

(71) : Tray packaging

(91) : Embossed tape packaging

Note 1 : There is no polarity with respect to board mounting for this product.

Note 2 : The coplanarity of this product's SMT leads is 0.1mm or less.

Note 3 : Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)

BRecommended PCB Layout Dimensions (Metal mask)

Recommended metal mask thickness : 0.15mm

1

2

3

Note

Cross-hatched portions, totaling n places, indicate the ground circuits.

Cross-hatched portions, 2 places on both sides, indicate the metal fittings.

Not required in products without guideposts.

7

FX10 Series●15⁺Gbps 0.5mm pitch Stacking Connectors

■General Product Specifications (3 piece type)

Rated

current

Rated

Operating temperature

range

Storage

temperature range

-10 to +60ç

(Note 2)

0.3A

-55 to 85ç (Note 1)

Rating

Operating humidity

range

Relative humidity 95% max

(No condensation)

Storage humidity

range

40 to 70%

(Note 2)

50V AC

voltage

Item

Requirements

Conditions

1. Insulation resistance 100Mø min

2. Voltage resistance No flashover or breakdown

3. Contact resistance 8mm height : 80mø max

9mm height : 85mø max

Measured at 100 V DC

150 V AC applied for 1 minute

10mm height : 90mø max

11mm height : 95mø max

Measured at 100 mA

12mm height : 100mø max

13mm height : 105mø max

4. Vibration resistance No electrical discontinuity for 1µs or greater

No damage, cracks, or parts looseness

Frequency : 10 to 55 Hz, amplitude of 0.75mm

in 3 axis directions, 10 cycles each.

Acceleration of 490m/s , 11ms duration, sine

half-wave waveform, for 3 cycles in both directions

of each of the 3 axes

2

5. Shock resistance

No electrical discontinuity for 1µs or greater

No damage, cracks, or parts looseness

6. Damp heat

(Steady state)

Contact resistance change : 20 mø or less,

insulation resistance of 100Mø min, no

damage, cracks, or parts looseness

Temperature of 40ç, humidity of 90 to 95%,

duration 96 h

7. Temperature cycle Contact resistance change : 20mø or less,

insulation resistance of 100Mø min, no

Temperature : -55ç → 15 to 35ç → 85ç → 15 to 35ç

Time : 30 min. → 2 to 3 min. → 30 min. → 2 to 3 min.

for 5 cycles

damage, cracks, or parts looseness

8. Mating Cycles

Contact resistance change : 20mø or less

No damage, cracks, or parts looseness

50 times

Note 1 : Includes temperature rise caused by current flow.

Note 2 : The term storage refers to unused products kept for a long time prior to board mounting. Operating temperature

and humidity range are applicable to the non-conducting state after board assembly.

Note 3 : Information contained in this catalog represents general requirements for this series. Contact us for the drawings and

specifications for a specific part number shown.

■Materials / Finish

Part

Material

LCP

Phosphor bronze

Finish

Black/Gray

Contact Area: Gold plating

Ni plating

Notes

UL94V-0

Insulator

Contacts

Ground bar

Product Number Structure

■

Refer to the chart below when determining the product specifications from the product number.

Please select from the product numbers listed in this catalog when placing orders.

( )

FX10 - # IP 36 DM1 - #H #

-

q

w e

r t y

u

i

yPin configuration

qSeries Name : FX10

wPin count : 120, 144, 168 pins

Blank = Standard (all diff pairs),

M* =Reduced GND pins

uStacking height

8H : 8 to 10mm

8PH : 11 to 13mm

iSpecification suffix #

(Blank) : Ni1.5µm + Au0.1µm

eConnector type IP : Interposer

rNumber of Diff-pairs

tSignal type

D : Diff. 100 ohm

Q : Diff. 85 ohm

(Blank) : Open pin field

(03)

: Ni1.5µm + Au0.76µm

8

FX10 Series●15⁺Gbps 0.5mm pitch Stacking Connectors

■Interposer (3piece type)

A± ±.ꢀ

Mating side

(Gray)

Fixed side

(Black)

Unit : mm

Single-

Signal Differential

Ground

pins

Part No.

HRS No.

608-0001-3 **

ended

pins

A

Remarks

type

pairs

40

52

0

FX10-168IP-40D-8H(**)

FX10-168IP-40D-8PH(**)

FX10-168IP-52Q-8H(**)

FX10-168IP-52Q-8PH(**)

FX10-168IP-8H(**)

For 8 to 10mm height

For 11 to 13mm height

For 8 to 10mm height

For 11 to 13mm height

For 8 to 10mm height

For 11 to 13mm height

For 8 to 10mm height

For 11 to 13mm height

For 8 to 10mm height

For 11 to 13mm height

For 8 to 10mm height

For 11 to 13mm height

For 8 to 10mm height

For 11 to 13mm height

For 8 to 10mm height

For 11 to 13mm height

For 8 to 10mm height

For 11 to 13mm height

100ø

4

8

84

56

0

608-0004-1 **

608-0002-6 **

608-0005-4 **

608-0003-9 **

85ø

49.1

Open

168

12

8

FX10-168IP-8PH(**)

608-0006-7 ** pin field

FX10-144IP-32D-8H(**)

FX10-144IP-32D-8PH(**)

FX10-144IP-44Q-8H(**)

FX10-144IP-44Q-8PH(**)

FX10-144IP-8H(**)

608-0007-0 **

100ø

32

44

0

68

48

0

608-0011-7 **

608-0008-2 **

85ø

43.1

37.1

608-0010-4 **

608-0009-5 **

Open

144

4

FX10-144IP-8PH(**)

608-0012-0 ** pin field

FX10-120IP-28D-8H(**)

FX10-120IP-28D-8PH(**)

FX10-120IP-36Q-8H(**)

FX10-120IP-36Q-8PH(**)

FX10-120IP-8H(**)

608-0013-2 **

100ø

28

36

0

60

40

0

608-0014-5 **

608-0015-8 **

85ø

8

608-0016-0 **

608-0017-3 **

Open

120

FX10-120IP-8PH(**)

608-0018-6 ** pin field

[Specifications number] -✽ ✽, (✽ ✽)

Blank : Contact plating Ni1.5µm+Au0.1µm

(03) : Contact plating Ni1.5µm+Au0.76µm

Header

Stacking height

Header

(Fixed side)

Interposer

(Mating side)

8mm

9mm

FX10#-xP-SV

FX10#-xP-SV1

FX10#-xP-SV2

FX10#-xP-SV3

FX10#-xP-SV4

FX10#-xP-SV

FX10-xIP-xD(Q)-8H

FX10#-xP-SV1

10mm

11mm

12mm

13mm

FX10-xIP-xD(Q)-8PH

9

FX10 Series●15⁺Gbps 0.5mm pitch Stacking Connectors

■Signal integrity (2 piece type)

● Pin assignment

To match 100 ohm differential impedance and to reduce crosstalk, a staggered GSGSG pin assignment is recommended.

(G=ground and S=signal)

GSGSG

signal

Diff pair

ground

● Impedance

The differential impedance is 100 +/- 10 ohm for FX10 at 30 ps rise time (20% to 80%).

4mm (without GND)

5mm (without GND)

115

110

105

100

95

115

110

105

100

95

90

S(3,3)

800 1000

S(3,3)

800 1000

85

0

200

400

Time (ps)

600

0

200

400

Time (ps)

600

4mm (with GND)

5mm (with GND)

115

110

105

100

95

115

110

105

100

95

90

S(3,3)

800 1000

S(3,3)

1000

85

0

200

400

600

800

0

200

400

600

Time (ps)

● Propagation delay

The propagation delay is 62 and 67 ps for FX10 of 4mm and 5mm height (with and without GND), respectively.

10

FX10 Series●15⁺Gbps 0.5mm pitch Stacking Connectors

● Insertion loss

The differential insertion loss crosses 1dB at 10.8 and 9.2GHz for FX10 of 4mm and 5mm height, respectively.

4mm (without GND) 5mm (without GND)

0

IL

20

IL

20

0

5

10

15

0

5

10

15

Frequency (GHz)

4mm (with GND)

5mm (with GND)

0

IL

20

0

5

10

15

Frequency (GHz)

● Return loss

The differential return loss meets the IEEE 802.3ap specification to 20⁺and 13.5 GHz for FX10 of 4mm and 5mm height,

respectively.

4mm (without GND)

5mm (without GND)

0

RL

RL Spec

0

5

10

15

20

0

5

10

15

20

Frequency (GHz)

4mm (with GND)

5mm (with GND)

0

RL

RL Spec

0

5

10

15

20

0

5

10

15

20

Frequency (GHz)

11

FX10 Series●15⁺Gbps 0.5mm pitch Stacking Connectors

● Near-end crosstalk (NEXT)

The staggered GSGSG pin assignment results in low differential NEXT between neighboring pairs.

4mm (without GND)

5mm (without GND)

0

5

10

15

20

0

5

10

15

20

Frequency (GHz)

4mm (with GND)

5mm (with GND)

0

5

10

15

20

0

5

10

15

20

Frequency (GHz)

● Far-end crosstalk (FEXT)

The staggered GSGSG pin assignment results in low differential FEXT between neighboring pairs.

4mm (without GND)

5mm (without GND)

0

FEXT

0

5

10

15

20

0

5

10

15

20

Frequency (GHz)

4mm (with GND)

5mm (with GND)

0

FEXT

0

5

10

15

20

0

5

10

15

20

Frequency (GHz)

12

FX10 Series●15⁺Gbps 0.5mm pitch Stacking Connectors

● Insertion-loss-to-crosstalk ratio (ICR)

The insertion-loss-to-crosstalk ratio (ICR) with five-aggressor differential FEXT meets the extrapolated IEEE 802.3ap

specification to 10⁺Gbps.

4mm (without GND)

5mm (without GND)

60

50

40

30

20

10

0

60

50

40

30

20

10

0

ICR

ICR spec

0

2

4

6

8

10

0

2

4

6

8

10

Frequency (GHz)

4mm (with GND)

5mm (with GND)

60

50

40

30

20

10

0

50

40

30

20

10

0

ICR

ICR spec

0

2

4

6

8

10

0

2

4

6

8

10

Frequency (GHz)

13

FX10 Series●15⁺Gbps 0.5mm pitch Stacking Connectors

■Signal integrity (3-piece type)

● Pin assignment

For 100 ohm type interposer, pin assignment shall be GSGSG.

For 85 ohm type interposer, pin assignment shall be GSSG.

1.Differential Impedance

100 Type

2.Differential Impedance

85 Type

3.Open Pin Field Type

(With Ground Bar)

(No Ground Bar)

Pin Assignment

Row A

Row B

Row A

Row B

Signal Pin

Dedicated Ground Pin

Ground Bar

Differential Pair

● Impedance

● Insertion Loss

8mm (85 ohm type)

105

100

95

0

-1

-2

-3

-4

-5

90

85

80

75

IL

70

0

5

10

15

20

TDR, Rise-time: 50ps(20-80%)

Frequency (GHz)

65

0.9

0.95

1

1.05

1.1

1.15

1.2

1.25

1.3

Time (ns)

● Return Loss

The differential return loss meets the IEEE 802.3ap

+

specification to 20 GHz for FX10 of 8mm height.

8mm (85 ohm type)

0

-5

-10

-15

-20

-25

-30

-35

-40

RL

RL spec

-45

-50

0

5

10

15

20

Frequency (GHz)

14

FX10 Series●15⁺Gbps 0.5mm pitch Stacking Connectors

● Near-end crosstalk (NEXT)

8mm (85 ohm type)

0

-10

-20

-30

-40

-50

0

-10

-20

-30

-40

-50

-60

Sdd(2,5)

Sdd(2,3)

-60

0

5

10

15

20

0

5

10

15

20

Frequency (GHz)

● Far-end crosstalk (FEXT)

8mm (85 ohm type)

0

-10

-20

-30

-40

-50

-60

-20

-30

-40

-50

-60

6

8

10

12

14

16

18

20

0

5

10

15

20

Frequency(GHz)

● Insertion-loss-to-crosstalk ratio (ICR)

The insertion-loss-to-crosstalk ratio (ICR) with five-

aggressor differential FEXT meets the extrapolated IEEE

+

802.3ap specification to 15 Gbps.

8mm (85 ohm type)

60

50

40

30

20

10

ICR

ICR spec

0

5

10

15

20

Frequency (GHz)

15

FX10 Series●15⁺Gbps 0.5mm pitch Stacking Connectors

BEmbossed Carrier Tape Dimensions

Unit : mm

●Headers

Insertion Connector

A

B

C

D

E

F

G

12 0.1

0.1

(D)

0.9

FX10#-80P/8-SV

FX10#-100P/10-SV

FX10#-120P/12-SV

20.2 40.4 44

45.5 50.5

4

(

)

0.4

2

0.1

26.2 52.4 56

59 64

FX10#-140P/14-SV 34.2 68.4 72

76.5 81.5

45.5 50.5

3.8

330

FX10#-96P-SV

20.2 40.4 44

FX10#-120P-SV

FX10#-144P-SV

FX10#-168P-SV

FX10#-80P/8-SV1

FX10#-100P/10-SV1

FX10#-120P/12-SV1

26.2 52.4 56

59 64

34.2 68.4 72

20.2 40.4 44

76.5 81.5

45.5 50.5

(6.2)

(6.6)

26.2 52.4 56

59 64

Unreeling direction

FX10#-140P/14-SV1 34.2 68.4 72

76.5 81.5

45.5 50.5

4.8

370

FX10#-96P-SV1

FX10#-120P-SV1

FX10#-144P-SV1

FX10#-168P-SV1

20.2 40.4 44

26.2 52.4 56

34.2 68.4 72

59 64

+0.05

R0.75

0

76.5 81.5

Note : There is no polarity with respect to embossed tape

packaging for this product.

●Receptacles

12 0.1

(

)

3.5

0.9

4

0.1

)

0.4

2

0.1

Unit : mm

Insertion Connector

FX10#-80S/8-SV

A

B

C

E

F

G

20.2 40.4 44 45.5 50.5

FX10#-100S/10-SV

FX10#-120S/12-SV

26.2 52.4 56 59 64

FX10#-140S/14-SV 34.2 68.4 72 76.5 81.5

(7.6)

(8)

330

FX10#-96S-SV

FX10#-120S-SV

FX10#-144S-SV

FX10#-168S-SV

20.2 40.4 44 45.5 50.5

26.2 52.4 56 59 64

34.2 68.4 72 76.5 81.5

Unreeling direction

Note : There is no polarity with respect to embossed

tape packaging for this product.

+0.05

R0.75

0

●Reel Dimensions

(E)

(F)

Ø13 0.5

16

FX10 Series●15⁺Gbps 0.5mm pitch Stacking Connectors

BRecommended Temperature Profile

HRS test Conditions

Test board Glass epoxy 161mm∞100mm∞1.6mm thick

Solder method

: Reflow

Solder composition

: Paste,

96.5%Sn/3%Ag/0.5%Cu

: 0.15mm thick

: 2 cycles

Metal mask

Reflow cycles

The temperature profile is based on the above conditions.

In individual applications the actual temperature may vary,

depending on solder paste type,

volume/thickness and board size/thickness. Consult your

solder paste and equipment manufacturer for specific

recommendations.

BWashing Conditions

Organic Solvent Cleaning

Solvent

Room temperature washing Heated washing

IPA (Isopropyl alcohol)

™

HCFC (Hydrochlorofluorocarbon)

Water Type Cleaning

When using water based cleaning agents (e.g., terpene, alkali saponifiers) make sure the labeling discloses any effect on

metals, platings and plastics. Remove any moisture after cleaning. Residual flux or cleaning agents in the contact areas

may affect the electrical performance.

Cleaning Precautions

Residual flux or cleaning agents in the contact areas may affect the electrical performance. Please make sure a

thorough cleaning operation has been completed.

BConnector Handling Precautions

1. Mating lengths and creepage distance

The effective wipe length for this product is 1.1mm for the signal contact and 1 mm for the ground contact.

Creepage of the header and receptacle during mating should be within 0.5 mm of the fully mated position.

2. PCB support

Note that boards should not be supported solely by the connectors themselves. Support should be in the

form of spacers and screws or other suitable methods to support the boards.

3. Solder repairs

During repair, the flux could wick onto the contact area of the connector and cause reduced contact

reliability. In this case, make sure you understand washing conditions before washing is implemented.

4. Miscellaneous

・Note that excessive twisting while inserting or withdrawing connectors will cause damage.

・Slight color differences on the molded items may be noted. However, these color differences will not

affect the connector's performance.

17

FX10 Series●15⁺Gbps 0.5mm pitch Stacking Connectors

BSpacer

Spacers are required to support the PWB’s and protect the SMT solder joints.

Suggested spacer style is

shown below:

Spacer

Spacer, male-male, M3 thread

The recommended spacer height corresponds to the interposer stacking height as shown in the chart below.

Stacking height

4mm

Recommended spacer height

4.3 ꢀ.ꢁ12mm

Remark

5mm

5.3 ꢀ.ꢁ12mm

6mm

6

2

8

9

ꢀ.ꢁ12mm

1 piece type

2mm

8mm

9mm

ꢁꢀmm

ꢁꢁmm

ꢁ1mm

ꢁ3mm

ꢁꢀ ꢀ.ꢁ12mm

ꢁꢁ ꢀ.ꢁ12mm

ꢁ1 ꢀ.ꢁ12mm

ꢁ3 ꢀ.ꢁ12mm

3 piece type

◆Recommended spacer location

Four spacers located diagonally are required.

Spacers should be located ꢁꢀ to 3ꢀmm from the

connector to prevent excessive mechanical loading on

the interconnections.

10-30mm

If assembly will be subjected to vibration, spacer should

be located to prevent resonance, and additional spacer

may be required.

■ Interposer installation

Position the interposer directly over the

mounting header. (Interposers have no

polarity.)

Mating side

(Mold color: Gray)

Fixed side

(Mold color: Black)

Fixed side (black side) of the interposer

shall be mated with the mounting

header (fixed side).

Interposer

Do not use SV1, SV3, or SV4 headers on

both sides of the interposer. The wiping

length on the mating side becomes

shorter.

Mounting header

(Fixed side)

Header

Stacking height

Header

(Fixed side)

Interposer

(Mating side)

8mm

9mm

FXꢁꢀ#-xP-SV

FXꢁꢀ#-xP-SVꢁ

FXꢁꢀ#-xP-SV1

FXꢁꢀ#-xP-SV3

FXꢁꢀ#-xP-SV4

FXꢁꢀ#-xP-SV

FXꢁꢀ#-xP-SVꢁ

FXꢁꢀ-xIP-xD(Q)-8H

ꢁꢀmm

ꢁꢁmm

ꢁ1mm

ꢁ3mm

FXꢁꢀ-xIP-xD(Q)-8PH

18

FX10 Series●15⁺Gbps 0.5mm pitch Stacking Connectors

B Interposer removal

The interposer can be removed from the mounting

header by hand. (No special tools are needed.)

Removal and re-mating of the fixed side can

reduce the extraction force of the fixed side due to

wear. It is recommend to replace the interposer to

a new one once removed.

B Multiple Mating

<2-piece type>

It is not recommended to use multiple 2-piece FX10 connectors on the same PWB.

<3-piece type>

FX10 3-piece type has multiple mating capability.

If multiple connectors are used on the same PWB, they must be oriented in the same direction.

It is not recommended to mix orientations.

●Mating tolerance (3-piece type)

Due to the floating interposer, FX10 3-piece type can accept mating tolerances of up to 0.1ꢀmm

tolerance in the X-axis and up to 0.1ꢀmm in the ꢁ-axis.

0.15mm

19

FX10 Series●15⁺Gbps 0.5mm pitch Stacking Connectors

USA:

HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS CHICAGO OFFICE HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE)

2300 Warrenville Road, Suite 150,

Downers Grove, IL 60515

Phone : +1-630-282-6700

http://www.hirose.com/us/

2841 Junction Ave, Suite 200

San Jose, CA. 95134

Phone : +1-408-253-9640

Fax : +1-408-253-9641

http://www.hirose.com/us/

17197 N. Laurel Park Drive, Suite 253,

Livonia, MI 48152

Phone : +1-734-542-9963

Fax : +1-734-542-9964

http://www.hirose.com/us/

THE NETHERLANDS:

GERMANY:

HIROSE ELECTRIC EUROPE B.V.

Hogehillweg #8 1101 CC Amsterdam Z-O

Phone : +31-20-6557460

Fax : +31-20-6557469

HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH HIROSE ELECTRIC EUROPE B.V. NUREMBERG OFFICE

Schoenbergstr. 20, 73760 ostfildern

Phone : +49-711-456002-1

Fax : +49-711-456002-299

http://www.hirose.com/eu/

Neumeyerstrasse 22-26, 90411 Nurnberg

Phone : +49-911 32 68 89 63

Fax : +49-911 32 68 89 69

http://www.hirose.com/eu/

GERMANY:

FRANCE:

UNITED KINGDOM:

HIROSE ELECTRIC EUROPE B.V. HANOVER OFFICE

Bayernstr. 3, Haus C 30855 Langenhagen, Germany Regus La Garenne Colombes,Place de La Belgique,

HIROSE ELECTRIC EUROPE B.V. PARIS OFFICE

HIROSE ELECTRIC EUROPE BV (UK BRANCH)

4 Newton Court, Kelvin Drive, Knowlhill,

Phone : +49-511 97 82 61 30

Fax : +49-511 97 82 61 35

http://www.hirose.com/eu/

71 Boulevard National La Garenne Colombes, 92250, France Milton Keynes, MK5 8NH

Phone : +33 (0) 1 7082 3170

Fax : +33 (1) 7082 3101

Phone : +44-1908 202050

Fax : +44-1908 202058

http://www.hirose.com/eu/

CHINA:

HIROSE ELECTRIC (SHANGHAI) CO., LTD.

HIROSE ELECTRIC (SHANGHAI) CO.,LTD. BEIJING BRANCH HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD.

1601, Henderson Metropolitan, NO.300, East Nanjing A1001, Ocean International Center, Building 56# East 4th Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre,

Road, Huangpu District, Shanghai, China 200001

Phone : +86-21-6391-3355

Fax : +86-21-6391-3335

Ring Middle Road, ChaoYang District, Beijing, 100025

Phone : +86-10-5165-9332

Fax : +86-10-5908-1381

5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 518008

Phone : +86-755-8207-0851

Fax : +86-755-8207-0873

http://www.hirose.com/cn/

HONG KONG:

TAIWAN:

KOREA:

HIROSE ELECTRIC HONGKONG TRADING CO., LTD. HIROSE ELECTRIC TAIWAN CO., LTD.

Room 1001, West Wing, Tsim Sha Tsui Centre, 66 103 8F, No.87, Zhengzhou Rd., Taipei

Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong Phone : +886-2-2555-7377

HIROSE KOREA CO.,LTD.

250, Huimanggongwon-ro, Siheung-si,

Gyeonggi-do, Korea, 15083

Phone : +82-31-496-7000 or 7124

Fax : +82-31-496-7100

Phone : +852-2803-5338

Fax : +852-2591-6560

Fax : +886-2-2555-7350

http://www.hirose.com/tw/

http://www.hirose.com/hk/

http://www.hirose.co.kr/

SINGAPORE:

INDIA:

HIROSE ELECTRIC SINGAPORE PTE. LTD.

HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE

10 Anson Road #26-16, International Plaza Office NO.552, Regus-Green Boulevard, Level5, Tower C, Unit No-403, 4th Floor, No-84, Barton Centre, Mahatma

079903, Singapore

Sec62, Plot B-9A, Block B, Noida, 201301, Uttar Pradesh, India Gandhi (MG) Road, Bangalore 560 001, Karnataka, India

Phone : +65-6324-6113

Phone : +91-12-660-8018

Fax : +91-120-4804949

http://www.hirose.com/sg/

Phone : +91-80-4120 1907

Fax : +91-80-4120 9908

http://www.hirose.com/sg/

65-6324-6123

Fax : +

http://www.hirose.com/sg/

MALAYSIA:

THAILAND:

PENANG REPRESENTATIVE OFFICE

BANGKOK OFFICE (REPRESENTATIVE OFFICE)

1-21-01, Suntech @ Penang Cybercity (1164), Lintang Unit 4703, 47th FL., 1 Empire Tower, South Sathorn

Mayang Pasir 3,11950, Bayan Baru, Penang, Malaysia. Road, Yannawa, Sathorn, Bangkok 10120 Thailand

Phone : +604-619-2564

Fax : +604-619-2574

Phone : +66-2-686-1255

Fax : +66-2-686-3433

http://www.hirose.com/sg/

®

2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN

+

TEL: 81-45-620-3526 Fax: 81-45-591-3726

http://www.hirose.com

http://www.hirose-connectors.com

The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.

The contents of this catalog are current as of date of 12/2016. Contents are subject to change without notice for the purpose of improvements.

20


型号：	FX10A-168P-SV2(85)
厂家：	HRS
描述：	Board Connector, 168 Contact(s), 2 Row(s), Male, Straight, 0.02 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator, Plug PC 连接器
文件：	总20页 (文件大小：1025K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

FX10A-168P-SV2(85) [HRS]

相关型号：

FX10A-168P-SV3

FX10A-168P-SV4

FX10A-168S-SV

FX10A-168S-SV(21)

FX10A-168S-SV(91)

FX10A-168S-SV(93)

FX10A-168S-SV1

FX10A-168S-SV1(21)

FX10A-8-SV

FX10A-80P

FX10A-80P/8-SV(71)

FX10A-80P/8-SV1(71)