FX11LA-060P/06-SV71 [HRS]
0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections; 0.5mm间距连接器接地板2毫米至3mm板对板连接
| 型号： | FX11LA-060P/06-SV71 |
| 厂家： | 
HRS |
| 描述： | 0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections |
| 文件： | 总20页 (文件大小：690K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
FX11 Series
Stacking height : 2mm
Stacking height : 2.5mm, 3mm
■Features
10 Signal: 1 Ground Arrangement
1. Low Profile Design
The board to board mating height of 2mm, 2.5mm and 3mm suits
smaller, thinner case designs.
2. Improved Transmission Efficiency Between Boards
Transmission characteristics have been improved through
a design that fixes ground plates to both sides of the
header and receptacle.
Ground Plate
Signal contact
Housing
3. 10 Signal:1 Ground Arrangement
Signal and ground are arranged in a ratio of 10:1 with the
ground plate SMT connected to the board. The ground
stability achieved serves to reduce noise.
Metal fitting
Ground plate and metal fitting make contact
Stacking height variation
4. Metal Fittings for Added Solder Weld Strength
Metal fittings provide greater adhesion to the board,
protecting against peeling.The unique connector design
provides a connection between the fitting and the ground
plate for a stronger ground.
5. Suited to High-Density Applications
2mm
2.5 , 3
mm
The signal contact pitch of 0.5mm produces a smaller
connector utilizing less board area for mounting.
6. Structure Prevents Solder Wicking
Note: 2.0mm type and 2.5mm, 3mm type are not mated with each other.
A solder gap has been designed into the contact SMT
portion to prevent solder wicking.
Structure Prevent solder vicking
7. High contact reliability
Effective mating length is 0.55mm (2mm height),
1mm(2.5mm, 3mm height) for signal contacts.
Solder gap portion
8. Optional Ground Plate
Board mounting portion
Contact
surface
Land
An alternate style without the ground plate is available.The
space provided by the ground plate removal has been filled
with additional signal contacts.
■Applications
Notebook computers, PDA, and other miniature electronic equipment.
2013.1
1
FX11 Series■0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
BStacking height variation
■■With ground plate
Header
FX11L#-πP / π-SV
2mm
Receptacle
FX11L#-πS / π-SV
Header
FX11#-πP / π-SV
2.5mm
FX11#-πP / π-SV0.5
3mm
Receptacle
FX11#-πS / π-SV
■■Without ground plate
Header
FX11L#-πP-SV
2mm
Receptacle
FX11L#-πS-SV
Header
FX11#-πP-SV
2.5mm
FX11#-πP-SV0.5
3mm
Receptacle
FX11#-πS-SV
Note 1: The thickness of the solder paste is not included in the stacking height.
Note 2: 2mm type and 2.5mm, 3mm type, with ground plate type and without ground type are not mated with each other.
BCross section of mating
■■Stacking height : 2mm
Signal portion
Ground portion
Header
Receptacle
■■Stacking height : 2.5mm, 3mm
Signal portion
Ground portion
Header
Receptacle
(Shown for stacking height 2.5mm type.)
2
FX11 Series■0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
■Signal integrity
■Pin assignment
To match 100 ohm differential impedance and to reduce crosstalk, a staggered GSSG pin assignment is
recommended.(G=ground and S=signal)
GSSG
Signal
Diff pair
Ground
■Impedance
The differential impedance is 100 +/- 10 ohm for FX11 at 50 ps rise time(20% to 80%).
3mm(Without GND)
120
115
110
105
100
95
90
85
FX11- 3mm DifferentialTDR
1.3 1.4 1.5
80
0.8
0.9
1
1.1
1.2
Time (ns)
■Insertion-loss-to-crosstalk ratio (ICR)
The insertion-loss-to-crosstalk ratio (ICR) with five differential FEXT aggressors meets the extrapolated
+
IEEE802.3ap specification to 10 Gbps.
3mm(Without GND)
60
50
40
30
20
10
ICR
IEEEspec
0
0
1
2
3
4
5
6
7
8
9
10
Frequency (GHz)
3
FX11 Series■0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
Stacking height : 2mm
■Product Specifications
Rated current 0.3 A (Note 1) Operating temperature range -55 to 85ç
Storage temperature range -10 to +60ç (Note 2)
Rating Rated voltage 50 V AC
Operating humidity range
Relative humidity 95% or less Storage humidity range -40 to -70% (Note 2)
(No condensation)
Item
Requirements
Conditions
1. Insulation resistance
2. Voltage proof
100 Mø or greater
Measured at 100 V DC
No flashover or breakdown
60 mø or less
150 V AC applied for one minute
Measured at 100 mA
3. Contact resistance
No electrical discontinuity for 1µs or greater
No damage, cracks, or parts looseness
Frequency: 10 to 55 Hz, amplitude of 0.75 mm in 3 directions,
10 cycles each
4. Vibration
5. Shock
2
No electrical discontinuity for 1µs or longer
No damage, cracks, or parts looseness
Acceleration of 490 m/s , 11ms duration, sine half-wave
waveform,for 3 cycles in the both directions of each of the 3 axes
6. Damp heat
(Steady state)
Contact resistance of 70 m
ø or less, insulation resistance of
Temperature of 40ç, humidity of 90 to 95%, duration 96 h
100 M or greater, no damage, cracks, or parts looseness
ø
Temperature: -55
Time: 30 min. ■ 2 to 3 min. ■ 30 min. ■ 2 to 3 min. for 5 cycles
ç ■ 15 to 35ç ■ 85ç ■ 15 to 35ç
Contact resistance of 70 mø or less, insulation resistance of
7. Temperature cycle
8. Durability
100 M or greater, no damage, cracks, or parts looseness
ø
Contact resistance of 70 mø or less
No damage, cracks, or parts looseness
50 times
9. Resistance to
soldering heat
Reflow: At the recommended temperature profile
Soldering iron temperature: 360ç for 5 seconds
No melting of resin portion which affects performance
Note 1: The term storage refers to an unused products prior to board mounting (including packing materials) that is being kept for a long period.
The operating temperature and humidity range are applied to the non-conducting condition following board assembly.
:
Note 2 Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for
a specific part number shown.
■Materials
Part
Material
Finish
Remarks
UL94V-0
Insulator
LCP
Beige
Copper alloy
Header
Engagement Area: Gold plating of 0.1µm
Termination Area: Flash plating
Contacts
----------
Phosphor bronze
Phosphor bronze
Receptacle
Tin plating
Ground plate
Metal fitting
Metal plate
----------
----------
----------
Phosphor bronze
Tin plating
■Ordering information
-
(
)
# π
π
FX11L
P - /
4
- SV ■■■
Type With Ground Plate
1
2
5
6
3
-
(
)
# π
FX11L
P - SV ■■■
Type Without Ground Plate
1
2
3
4
5
6
1
2
Series name
:
FX11L
4
Connector type
Form Symbol
A
B
:
:
With guide post
P
S
:
:
Header
Without guide post
Receptacle
3
Type with ground plate
5
6
Contact form
SV Straight SMT
Number of contacts
:
Signal/Ground:60/6, 80/8,
100/10, 120/12
Blank, (71): Tray packaging (Without pick-and-place tape)
(21),(91): Embossed tape packaging (Without pick-and-place tape)
(22),(92): Embossed tape packaging (With pick-and-place tape)
Type without ground
Signal: 68, 92, 116, 140
4
FX11 Series■0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
■Header with ground Plate
A
0.2
■■2mm stacking height
(0.5)
0.2 0.05
(0.75)
(0.75)
(6)
B
C
0.2
0.3
2-(Ø0.8)
D
0.1
Guidepost
Unit : mm
Number of contacts
A
B
C
D
E
F
Remarks
RoHS
Part Number
CL No.
Signal
60
Ground
FX11LA-060P/06-SV(71)
FX11LA-080P/08-SV(71)
FX11LA-100P/10-SV(71)
FX11LA-120P/12-SV(71)
FX11LB-060P/06-SV(71)
FX11LB-080P/08-SV(71)
FX11LB-100P/10-SV(71)
FX11LB-120P/12-SV(71)
573-0002-7-71
573-0003-0-71
573-0004-2-71
573-0005-5-71
573-0012-0-71
573-0013-3-71
573-0014-6-71
573-0015-9-71
6
8
17.5 12 22.6 18 19.4 25.5
23.5 18 28.6 24 25.4 31.5
29.5 24 34.6 30 31.4 37.5
35.5 30 40.6 36 37.4 43.5
17.5 12 22.6 ---------- 19.4 25.5
23.5 18 28.6 ---------- 25.4 31.5
29.5 24 34.6 ---------- 31.4 37.5
35.5 30 40.6 ---------- 37.4 43.5
80
With guideposts
100
120
60
10
12
6
YES
80
8
Without guideposts
100
120
10
12
[Specifications number] – **, (**)
(71): Tray packaging
(91) : Embossed tape packaging (Without pick-and-place tape)
(92) : Embossed tape packaging (With pick-and-place tape)
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
BRecommended Land Pattern Dimensions (Metal Mask Dimensions)
Recommended metal mask thickness: 0.15 mm
4
F min
C+0.1
0
0
E-- 0.1
D
0.05
0.05
A
0.5 0.03
0.75 0.03
0.75 0.03
3
Ø0.9 0.05
0.25 0.05
3
Ø1 0.05
1
6
0.05 0.7 0.03(Land)
0.6 0.03(Metal mask)
0.05
0.3 0.03(Land)
0.25 0.03(Metal Mask)
3
0.05
B
1
2
Note
Cross-hatched portions, totaling n places, indicate the ground circuits.
The cross-hatched area
inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
Not required in products without guideposts.
3
4
Do not mount a part other than this product in the area of
of this and the mating connector.
. Doing so will prevent the engagement
5
FX11 Series■0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
■Receptacle with ground Plate
A
0.2
■■2mm stacking height
(0.5)
0.5 0.05
0.2 0.05
(0.75)
(0.75)
(6)
B
C
0.2
0.3
2-(Ø0.8)
D
0.1
Guidepost
Unit : mm
RoHS
Number of contacts
A
B
C
D
E
F
Remarks
Part Number
CL No.
Signal
60
Ground
573-0102-1-71
573-0103-4-71
573-0104-7-71
573-0105-0-71
573-0112-5-71
573-0113-8-71
573-0114-0-71
573-0115-3-71
FX11LA-060S/06-SV(71)
FX11LA-080S/08-SV(71)
FX11LA-100S/10-SV(71)
FX11LA-120S/12-SV(71)
FX11LB-060S/06-SV(71)
FX11LB-080S/08-SV(71)
FX11LB-100S/10-SV(71)
FX11LB-120S/12-SV(71)
6
8
17.5 12
23.5 18
29.5 24
35.5 30
17.5 12
23.5 18
29.5 24
35.5 30
25 20.8 25.4 22.2
31 26.8 31.4 28.2
37 32.8 37.4 34.2
43 38.8 43.4 40.2
80
With guideposts
100
120
60
10
12
6
YES
25
31
37
43
---------- 25.4 22.2
---------- 31.4 28.2
---------- 37.4 34.2
---------- 43.4 40.2
80
8
Without guideposts
100
120
10
12
[Specifications number] – **, (**)
(71): Tray packaging (Without pick-and-place tape)
(91) : Embossed tape packaging (Without pick-and-place tape)
(92) : Embossed tape packaging (With pick-and-place tape)
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
BRecommended Land Pattern Dimensions (Metal Mask Dimensions)
Recommended metal mask thickness: 0.15 mm
E+0.1
0
0
F-- 0.1
D
0.05
0.05
A
0.5 0.03
0.75 0.03
0.75 0.03
2
4
Ø0.9 0.05
Ø1 0.05
4
1
0.7 0.03(Land)
0.6 0.03 Metal mask)
0.05
0.3 0.03(Land)
1.65 0.05
6 0.05
(
0.25 0.03(Metal mask)
4.4 0.05
B
1
2
3
Note
Cross-hatched portions, totaling n places, indicate the ground circuits.
Cross-hatched portions, 2 places on both sides, indicate the metal fittings.
The cross-hatched area
inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
Not required in products without guideposts.
4
6
FX11 Series■0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
■Header without ground Plate
A
0.2
■■2mm stacking height
(0.5)
0.2 0.05
B
C
0.3
0.1
1-(Ø0.8)
Guidepost
Unit : mm
Number of contacts
A
B
C
D
E
Remarks
RoHS
Part Number
CL No.
Signal
68
573-0042-1-**
573-0043-4-**
573-0044-7-**
573-0045-0-**
573-0052-5-**
573-0053-8-**
573-0054-0-**
573-0055-3-**
FX11LA- 68P-SV(**)
FX11LA- 92P-SV(**)
FX11LA-116P-SV(**)
FX11LA-140P-SV(**)
FX11LB- 68P-SV(**)
FX11LB- 92P-SV(**)
FX11LB-116P-SV(**)
FX11LB-140P-SV(**)
16.5 22.6 18 19.4 25.5
22.5 28.6 24 25.4 31.5
28.5 34.6 30 31.4 37.5
34.5 40.6 36 37.4 43.5
16.5 22.6 ---------- 19.4 25.5
22.5 28.6 ---------- 25.4 31.5
28.5 34.6 ---------- 31.4 37.5
34.5 40.6 ---------- 37.4 43.5
92
With guideposts
Without guideposts
116
140
68
YES
92
116
140
[Specifications number] – **, (**)
Blank: Tray packaging (Without pick-and-place tape)
(21) : Embossed tape packaging (Without pick-and-place tape)
(22) : Embossed tape packaging (With pick-and-place tape)
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
B
Recommended Land Pattern Dimensions (Metal Mask Dimensions)
Recommended metal mask thickness: 0.15 mm
3
E min
B+0.1
0
0
D-- 0.1
C
0.05
0.05
A
0.5 0.03
Ø1 0.05
2
2
Ø0.9 0.05
0.75 0.05
0.3 0.03(Land)
0.25 0.03(Metal mask
)
1
Note
The cross-hatched area
inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
Not required in products without guideposts.
2
3
Do not mount a part other than this product in the area of
of this and the mating connector.
. Doing so will prevent the engagement
7
FX11 Series■0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
■Receptacle without ground Plate
A
B
0.2
0.2
■■2mm stacking height
0.2 0.05
0.5 0.05
(0.5)
C
D
0.3
0.1
Guidepost
Unit : mm
RoHS
Number of contacts
A
B
C
D
Remarks
Part Number
CL No.
Signal
68
573-0142-6-**
573-0143-9-**
573-0144-1-**
573-0145-4-**
573-0152-0-**
573-0153-2-**
573-0154-5-**
573-0155-8-**
20.8
26.8
32.8
38.8
----------
----------
----------
----------
FX11LA- 68S-SV(**)
FX11LA- 92S-SV(**)
FX11LA-116S-SV(**)
FX11LA-140S-SV(**)
FX11LB- 68S-SV(**)
FX11LB- 92S-SV(**)
FX11LB-116S-SV(**)
FX11LB-140S-SV(**)
18 16.5 25
24 22.5 31
30 28.5 37
36 34.5 43
18 16.5 25
24 22.5 31
30 28.5 37
36 34.5 43
92
With guideposts
Without guideposts
116
140
68
YES
92
116
140
[Specifications number] – **, (**)
Blank: Tray packaging (Without pick-and-place tape)
(21) : Embossed tape packaging (Without pick-and-place tape)
(22) : Embossed tape packaging (With pick-and-place tape)
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
B
Recommended Land Pattern Dimensions (Metal Mask Dimensions)
Recommended metal mask thickness: 0.15 mm
D 0.05
A 0.05
B 0.05
0.5 0.03
2
2
Ø0.9 0.05
2.15 0.05
Ø1 0.05
0.7 0.03(Land)
0.6 0.03(Metal mask)
0.3 0.03(Land)
0.25 0.03(Metal mask)
1
2
Note
The cross-hatched area
and thus care should be taken that the pattern does not extend beyond the SMT land width.
Not required in products without guideposts.
inside the SMT land may come into contact with the connector contacts
8
FX11 Series■0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
Stacking height : 2.5mm, 3mm
■Product Specifications
Rated current 0.3 A (Note 1) Operating temperature range -55 to 85ç
Storage temperature range -10 to +60ç (Note 2)
Rating Rated voltage 50 V AC
Operating humidity range
Relative humidity 95% or less Storage humidity range -40 to -70% (Note 2)
(No condensation)
Item
Requirements
Conditions
1. Insulation resistance
2. Voltage proof
100 Mø or greater
No flashover or breakdown
Measured at 100 V DC
150 V AC applied for one minute
Measured at 100 mA
3. Contact resistance
70 mø or less
No electrical discontinuity for 1µs or greater
No damage, cracks, or parts looseness
Frequency: 10 to 55 Hz, amplitude of 0.75 mm in 3 directions,
10 cycles each
4. Vibration
5. Shock
2
No electrical discontinuity for 1µs or longer
No damage, cracks, or parts looseness
Acceleration of 490 m/s , 11ms duration, sine half-wave
waveform,for 3 cycles in the both directions of each of the 3 axes
6. Damp heat
(Steady state)
Contact resistance of 80 m
ø or less, insulation resistance of
Temperature of 40ç, humidity of 90 to 95%, duration 96 h
100 M or greater, no damage, cracks, or parts looseness
ø
Temperature: -55
Time: 30 min. ■ 2 to 3 min. ■ 30 min. ■ 2 to 3 min. for 5 cycles
ç ■ 15 to 35ç ■ 85ç ■ 15 to 35ç
Contact resistance of 80 mø or less, insulation resistance of
7. Temperature cycle
8. Durability
100 M or greater, no damage, cracks, or parts looseness
ø
Contact resistance of 80 mø or less
No damage, cracks, or parts looseness
50 times
9. Resistance to
soldering heat
Reflow: At the recommended temperature profile
Soldering iron temperature: 360ç for 5 seconds
No melting of resin portion which affects performance
Note 1: The term storage refers to an unused products prior to board mounting (including packing materials) that is being kept for a long period.
The operating temperature and humidity range are applied to the non-conducting condition following board assembly.
Note 2: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for
a specific part number shown.
■Materials
Part
Material
Finish
Remarks
UL94V-0
Insulator
LCP
Beige
Copper alloy
Header
Engagement Area: Gold plating of 0.1µm
Termination Area: Flash plating
Contacts
----------
Phosphor bronze
Phosphor bronze
Receptacle
Tin plating
Ground plate
Metal fitting
Metal plate
----------
----------
----------
Phosphor bronze
Tin plating
■Ordering information
-
(
)
# π
π
FX11
P /
4
- SV 0.5 ■■■
Type With Ground Plate
1
2
5
6
7
3
-
(
)
# π
FX11
P - SV 0.5 ■■■
Type Without Ground Plate
1
2
3
4
5
6
7
Connector type
1
2
Series name
:
FX11
4
P
S
:
:
Header
Receptacle
Form Symbol
A
B
:
:
With guide post
Without guide post
Type with ground plate
Signal/Ground:60/6,
80/8, 100/10
5
6
Contact form
Product height
Blank: Standard
SV
:
Straight SMT
3
Number of contacts
0.5 : Standard + 0.5mm
7
Blank, (71): Tray packaging (Without pick-and-place tape)
(21),(91): Embossed tape packaging (Without pick-and-place tape)
(22),(92): Embossed tape packaging (With pick-and-place tape)
Type without ground
Signal: 80, 100
9
FX11 Series■0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
A
0.2
■Header with ground plate
■■2.5mm stacking height
(
)
0.5 0.05
0.5
0.2 0.05
(
)
(
)
0.75
0.75
( )
6
B
C
0.2
0.3
2-(Ø0.8 )
Guidepost
D
0.1
E
Unit : mm
Number of contacts
A
B
C
D
F
Remarks
RoHS
Part Number
CL No.
Signal
60
Ground
FX11A- 60P/06-SV(71)
FX11A- 80P/08-SV(71)
FX11A-100P/10-SV(71)
FX11B- 60P/06-SV(71)
FX11B- 80P/08-SV(71)
FX11B-100P/10-SV(71)
573-0502-0-71
573-0503-2-71
573-0504-5-71
573-0512-3-71
573-0513-6-71
573-0514-9-71
6
8
17.5 12 22.6 18 19.4 25.5
23.5 18 28.6 24 25.4 31.5
29.5 24 34.6 30 31.4 37.5
17.5 12 22.6 ---------- 19.4 25.5
23.5 18 28.6 ---------- 25.4 31.5
29.5 24 34.6 ---------- 31.4 37.5
With guideposts
80
100
60
10
6
YES
Without guideposts
80
8
100
10
[Specifications number] – **, (**)
(71): Tray packaging (Without pick-and-place tape)
(91) : Embossed tape packaging (Without pick-and-place tape)
(92) : Embossed tape packaging (With pick-and-place tape)
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
BRecommended Land Pattern Dimensions (Metal Mask Dimensions)
Recommended metal mask thickness: 0.15 mm
4
F min
C+0.1
0
E 0
D
0.05
0.05
A
0.5 0.03
0.75 0.03
0.75 0.03
3
Ø0.9 0.05
0.25 0.05
3
Ø1 0.05
(Land)
1
6
0.05 0.7 0.03
0.6 0.03(Metal mask)
0.05
0.3 0.03(Land)
0.25 0.03(Metal mask)
3
0.05
B
1
2
Note
Cross-hatched portions, totaling n places, indicate the ground circuits.
The cross-hatched area
inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
Not required in products without guideposts.
3
4
Do not mount a part other than this product in the area of
of this and the mating connector.
. Doing so will prevent the engagement
10
FX11 Series■0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
A
0.2
■Header with ground plate
(0.5)
0.5 0.05
■■3mm stacking height
0.2 0.05
(0.75)
(0.75)
(6)
B
C
0.2
0.3
2-(Ø0.8)
Guidepost
D
0.1
E
Unit : mm
Number of contacts
A
B
C
D
F
Remarks
RoHS
Part Number
CL No.
Signal
60
Ground
FX11A- 60P/ 6-SV0.5(71)
FX11A- 80P/ 8-SV0.5(71)
FX11A-100P/10-SV0.5(71)
FX11B- 60P/ 6-SV0.5(71)
FX11B- 80P/ 8-SV0.5(71)
FX11B-100P/10-SV0.5(71)
573-0602-4-71
573-0603-7-71
573-0604-0-71
573-0612-8-71
573-0613-0-71
573-0614-3-71
6
8
17.5 12 22.6 18 19.4 25.5
23.5 18 28.6 24 25.4 31.5
29.5 24 34.6 30 31.4 37.5
17.5 12 22.6 ---------- 19.4 25.5
23.5 18 28.6 ---------- 25.4 31.5
29.5 24 34.6 ---------- 31.4 37.5
With guideposts
80
100
60
10
6
YES
Without guideposts
80
8
100
10
[Specifications number] – **, (**)
(71): Tray packaging (Without pick-and-place tape)
(91) : Embossed tape packaging (Without pick-and-place tape)
(92) : Embossed tape packaging (With pick-and-place tape)
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
BRecommended Land Pattern Dimensions (Metal Mask Dimensions)
Recommended metal mask thickness: 0.15 mm
4
Fmin
C+0.1
0
0
-0.1
E
D
0.05
0.05
A
0.5 0.03
0.75 0.03
0.75 0.03
Ø0.9 0.05
0.25 0.05
3
Ø1 0.05
3
1
6 0.05
0.7 0.03 (Land)
0.3 0.03(Land)
0.6 0.03(Metal mask)
0.25 0.03(Metal mask)
B
0.05
3
0.05
1
2
Note
Cross-hatched portions, totaling n places, indicate the ground circuits.
The cross-hatched area
inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
Not required in products without guideposts.
3
4
Do not mount a part other than this product in the area of
of this and the mating connector.
. Doing so will prevent the engagement
11
FX11 Series■0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
■Receptacle with ground plate
A
0.2
■■2.5mm, 3mm stacking height
(0.5)
0.5 0.05
0.2 0.05
(0.75)
(0.75)
(6)
B
C
0.2
0.3
Guidepost
2-(Ø0.8)
D
0.1
E
Unit : mm
RoHS
Number of contacts
A
B
C
D
F
Remarks
Part Number
CL No.
Signal
60
Ground
FX11A- 60S/ 6-SV(71)
FX11A- 80S/ 8-SV(71)
FX11A-100S/10-SV(71)
FX11B- 60S/ 6-SV(71)
FX11B- 80S/ 8-SV(71)
FX11B-100S/10-SV(71)
573-0702-9-71
573-0703-1-71
573-0704-4-71
573-0712-2-71
573-0713-5-71
573-0714-8-71
6
8
17.5 12
23.5 18
29.5 24
17.5 12
23.5 18
29.5 24
25 20.8 25.4 22.2
31 26.8 31.4 28.2
37 32.8 37.4 34.2
With guideposts
80
100
60
10
6
YES
25
31
37
---------- 25.4 22.2
---------- 31.4 28.2
---------- 37.4 34.2
Without guideposts
80
8
100
10
[Specifications number] – **, (**)
(71): Tray packaging (Without pick-and-place tape)
(91) : Embossed tape packaging (Without pick-and-place tape)
(92) : Embossed tape packaging (With pick-and-place tape)
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
BRecommended Land Pattern Dimensions (Metal Mask Dimensions)
Recommended metal mask thickness: 0.15 mm
E+0.1
0
0
F-0.1
D
0.05
0.05
A
0.5 0.03
0.75 0.03
0.75 0.03
2
4
4
Ø0.9 0.05
Ø1 0.05
6
0.05 0.7 0.03(Land)
0.6 0.03(Metal mask)
0.05
0.3 0.03(Land)
1.65 0.05
4.4 0.05
0.25 0.03(Metal mask)
B
1
2
3
Note
Cross-hatched portions, totaling n places, indicate the ground circuits.
Cross-hatched portions, totaling 2 places, indicate the metal fittings.
The cross-hatched area
inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
Not required in products without guideposts.
4
12
FX11 Series■0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
A
0.2
■Header without ground Plate
■■2.5mm stacking height
(0.5)
0.2 0.05
B
0.3
Guidepost
2-(Ø0.8)
C
0.1
Unit : mm
RoHS
Number of contacts
A
B
C
D
E
Remarks
Part Number
CL No.
Signal
80
573-0548-0-**
573-0543-7-**
573-0558-4-**
573-0553-0-**
20
25
21.4 27.5
26.4 32.5
FX11A- 80P-SV(**)
FX11A-100P-SV(**)
FX11B- 80P-SV(**)
FX11B-100P-SV(**)
19.5 24.6
24.5 29.6
19.5 24.6
24.5 29.6
With guideposts
Without guideposts
100
80
YES
---------- 21.4 27.5
---------- 26.4 32.5
100
[Specifications number] – **, (**)
Blank: Tray packaging (Without pick-and-place tape)
(21) : Embossed tape packaging (Without pick-and-place tape)
(22) : Embossed tape packaging (With pick-and-place tape)
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
BRecommended Land Pattern Dimensions (Metal Mask Dimensions)
Recommended metal mask thickness: 0.15 mm
3
E min
B+0.1
0
D-00.1
C
0.05
0.05
A
0.5 0.03
2
Ø0.9 0.05
2
Ø1 0.05
0.25 0.05
0.3(Land)
0.25 0.03(Metal mask)
Note 1 The cross-hatched area
inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
2 Not required in products without guideposts.
3 Do not mount a part other than this product in the area of
of this and the mating connector.
. Doing so will prevent the engagement
13
FX11 Series■0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
A
0.2
■Header without ground Plate
■■3mm stacking height
(0.5)
0.2 0.05
B
0.3
Guidepost
2-(Ø0.8)
C
0.1
Unit : mm
RoHS
Number of contacts
A
B
C
D
E
Remarks
Part Number
CL No.
Signal
80
573-0648-5-**
573-0643-1-**
573-0658-9-**
573-0653-5-**
20
25
21.4 27.5
26.4 32.5
FX11A- 80P-SV0.5(**)
FX11A-100P-SV0.5(**)
FX11B- 80P-SV0.5(**)
FX11B-100P-SV0.5(**)
19.5 24.6
24.5 29.6
19.5 24.6
24.5 29.6
With guideposts
Without guideposts
100
80
YES
---------- 21.4 27.5
---------- 26.4 32.5
100
[Specifications number] – **, (**)
Blank: Tray packaging (Without pick-and-place tape)
(21) : Embossed tape packaging (Without pick-and-place tape)
(22) : Embossed tape packaging (With pick-and-place tape)
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
BRecommended Land Pattern Dimensions (Metal Mask Dimensions)
Recommended metal mask thickness: 0.15 mm
3
E min
B+0.1
0
D-00.1
C
0.05
0.05
A
0.5 0.03
2
Ø0.9 0.05
2
Ø1 0.05
0.25 0.05
0.3(Land)
0.25 0.03(Metal mask)
Note 1 The cross-hatched area
inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
2 Not required in products without guideposts.
3 Do not mount a part other than this product in the area of
of this and the mating connector.
. Doing so will prevent the engagement
14
FX11 Series■0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
A
0.2
■Receptacle without ground plate
■■2.5mm, 3mm stacking height
( 0.5 )
0.2 0.05
B
0.3
2-(Ø0.8 )
Guidepost
C
0.1
Unit : mm
RoHS
Number of contacts
A
B
C
D
E
Remarks
Part Number
CL No.
Signal
80
573-0748-0-**
573-0743-6-**
573-0758-3-**
573-0753-0-**
22.8 27.4 24.2
27.8 32.4 29.2
---------- 27.4 24.2
---------- 32.4 29.2
FX11A- 80S-SV(**)
FX11A-100S-SV(**)
FX11B- 80S-SV(**)
FX11B-100S-SV(**)
19.5 27
24.5 32
19.5 27
24.5 32
With guideposts
Without guideposts
100
80
YES
100
[Specifications number] – **, (**)
Blank: Tray packaging (Without pick-and-place tape)
(21) : Embossed tape packaging (Without pick-and-place tape)
(22) : Embossed tape packaging (With pick-and-place tape)
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
BRecommended Land Pattern Dimensions (Metal Mask Dimensions)
Recommended metal mask thickness: 0.15 mm
D+0.1
0
0
E-0.1
0.05
C
A
0.05
0.5 0.03
2
Ø0.9 0.05
2
Ø1 0.05
0.3 0.03 (Land)
1.65 0.05
0.25 0.03(Metal mask)
Note 1 The cross-hatched area
inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
2 Not required in products without guideposts.
15
FX11 Series■0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
BEmbossed Carrier Tape Dimensions
Unit : mm
Insertion Connector
FX11L#- 60P/ 6-SV
FX11L#- 80P/ 8-SV
FX11L#-100P/10-SV
FX11L#-120P/12-SV
A
B
C
D
E
F
(
)
(
)
0.9
F
■Header
12 0.1
20.2 40.4 44 45.5 50.5
26.2 52.4 56 59 64
20.2 40.4 44 45.5 50.5
26.2 52.4 56 59 64
Ø1.5+0.1
2
0.1
4
0.1
(
)
0.4
0
1.98
FX11L#- 68P
FX11L#- 92P
-SV
-SV
FX11L#-116P -SV
FX11L#-140P -SV
FX11 #- 60P/ 6-SV
FX11 #- 80P/ 8-SV
FX11 #-100P/10-SV
20.2 40.4 44 45.5 50.5
26.2 52.4 56 59 64 2.48
FX11 #- 80P
-SV
20.2 40.4 44 45.5 50.5
20.2 40.4 44 45.5 50.5
FX11 #-100P -SV
FX11 #- 60P/ 6-SV0.5
FX11 #- 80P/ 8-SV0.5
Unreeling direction
FX11 #-100P/10-SV0.5 26.2 52.4 56
FX11 #- 80P -SV0.5
FX11 #-100P -SV0.5
Note 1: There is no polarity in terms of embossed tape packaging for
this product.
59
64 2.98
20.2 40.4 44 45.5 50.5
R0.75+0.05
0
Note 2: Left figure is representative of products with ground plates.
12 0.1
(F)
(0.9)
■Receptacle
Unit : mm
Ø1.5 +0.1
Insertion Connector
FX11L#- 60S/ 6-SV
FX11L#- 80S/ 8-SV
FX11L#-100S/10-SV
FX11L#-120S/12-SV
A
B
C
D
E
F
2
0.1
4
0.1
(0.4)
0
20.2 40.4 44 45.5 50.5
26.2 52.4 56 59 64
20.2 40.4 44 45.5 50.5
26.2 52.4 56 59 64
2
FX11L#- 68S
FX11L#- 92S
-SV
-SV
FX11L#-116S -SV
FX11L#-140S -SV
FX11 #- 60S/ 6-SV
FX11 #- 80S/ 8-SV
FX11 #-100S/10-SV
20.2 40.4 44 45.5 50.5
26.2 52.4 56 59 64 2.45
20.2 40.4 44 45.5 50.5
FX11 #- 80S
-SV
FX11 #-100S -SV
Unreeling direction
Note 1: There is no polarity in terms of embossed tape packaging for
this product.
Note 2: Left figure is representative of products with ground plates.
R0.75+0.05
0
■Reel Dimensions
Ø13 0.5
(D)
(E)
16
FX11 Series■0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
BRecommended Temperature Profile
(MAX250ç)
260
240
220
200
180
160
140
HRS test conditions
Test boardGlass epoxy 60mm∞35mm∞1.6mm thick
220ç
Solder method
: Reflow
200ç
Solder composition : Paste,96.5%Sn/ 3%Ag/ 0.5%Cu
Metal mask
: 0.15mm thick
: 2 cycles
Reflow cycles
150ç
The temperature profile is based on the above conditions.
In individual applications the actual temperature may vary,
depending on solder paste type, volume/thickness and
board size/thickness. Consult your solder paste and
equipment manufacturer for specific recommendations.
0
(60 sec. max.)
(90 to 120 sec.)
Preheating(150 to 200ç)
Time(sec.)
Soldering
(220ç min)
Note : The temperature profile indicates the maximum temperature
of the connector surfaces at the highest point from the PCB
mounting surface.
BWashing Conditions
Organic Solvent Washing
Solvent
Room temperature washing Heated washing
IPA(Isopropyl alcohol)
Yes
Yes
Yes
Yes
HCFC(Hydrochlorofluorocarbon)
Water Type Washing
When using water type cleaning agents (e.g., terpene, and alkali saponifiers), select the cleaning agent based on the
documentation issued by the various manufacturers of cleaning agents which describes the effects on metals and resins.
Be careful that parts are not left with moisture remaining on them.
Washing Precautions
Residual flux or cleaning agent on the contacts when washing with organic solvents or water type cleaners can give rise to the
deterioration of electrical performance. In this regard it is important to check whether a thorough washing has been performed.
BConnector Handling Precautions
1. Allowable Creepage Dimensions at Time of Mating
[Stacking height : 2mm]
[Stacking height : 2.5mm, 3mm]
The effective coupling length of this product is 0.55 mm for
the signal portion and the ground portion. The creepage of
the header and receptacle at the time of mating should be
within 0.18 mm of the completely coupled condition.
The effective coupling length of this product is 1 mm for the
signal portion and 0.7mm for the ground portion. The creepage
of the header and receptacle at the time of mating should be
within 0.4 mm of the completely coupled condition.
2. Compatibility
2mm type and 2.5mm, 3mm type, with ground plate type and without ground type are not mated with each other.
3. Retension of Boards
Avoid the support of boards by connectors alone and adopt a board locking measure that does not rely on the connectors.
4. Solder Repair
Flux may rise as far as the contact portion of the connector depending on the flux coating and other factors at the time of repair.
This will cause poor contact reliability; therefore, before use, the aforementioned washing conditions should be taken into
consideration prior to connector washing.
5. Miscellaneous
·Note that excessive twisting while inserting or withdrawing connectors will cause damage.
·The shade of the molded items may vary somewhat depending on the manufacturing lot; however, this does not affect performance.
17
FX11 Series■0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
:
NOTES
18
FX11 Series■0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
:
NOTES
19
FX11 Series■0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
USA:
USA:
USA:
HIROSE ELECTRIC (U.S.A.), INC. Headquarters
HIROSE ELECTRIC (U.S.A.), INC. San Jose Office
HIROSE ELECTRIC (U.S.A.), INC. Detroit Office (Automotive)
2688 Westhills Court, Simi Valley, CA 93065-6235 20400 Stevens Creek Blvd., Ste 250, Cupertino, 37677 Professional Center Drive, Suite #100C
Phone : +1-805-522-7958
Fax : +1-805-522-3217
http://www.hiroseusa.com
CA 95014
Livonia, MI 48154
Phone : +1-408-253-9640
Fax : +1-408-253-9641
http://www.hiroseusa.com
Phone : +1-734-542-9963
Fax : +1-734-542-9964
http://www.hiroseusa.com
THE NETHERLANDS:
GERMANY:
UNITED KINGDOM:
HIROSE ELECTRIC EUROPE B.V.
Hogehillweg #8 1101 CC Amsterdam Z-O
Phone : +31-20-6557460
Fax : +31-20-6557469
HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH
Herzog-Carl-Strasse 4 D-73760 Ostfildern
(Scharnhauser Park)
Phone : +49-711-4560-02-1
Fax : +49-711-4560-02-299
http://www.hirose.de
HIROSE ELECTRIC EUROPE B.V. UK BRANCH
First Floor, St Andrews House, Caldecotte Lake
Business Park, Milton Keynes MK7 8LE
Phone : +44-1908-369060
Fax : +44-1908-369078
http://www.hirose.co.uk
http://www.hiroseeurope.com
CHINA:
CHINA:
CHINA:
HIROSE ELECTRIC (SHANGHAI) CO., LTD.
HIROSE ELECTRIC (SHANGHAI) CO., LTD. BEIJING BRANCH HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD.
1601,Henderson Metropolitan,NO.300 ,East Nanjing A1001, Ocean International Center, Building 56# East 4th Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre
Road,Huangpu District, Shanghai,China 200001
Phone : +86-21-6391-3355
Ring Middle Road, Chao Yang District, Beijing, 100025
Phone : +86-10-5165-9332
5002, ShenNanDong Road, ShenZhen City, Guangdong Province, 518008
Phone : +86-755-8207-0851
Fax : +86-21-6391-3335
Fax : +86-10-5908-1381
Fax : +86-755-8207-0873
http://www.hirose-china.com.cn
http://www.hirose-china.com.cn
http://www.hirose-china.com.cn
HONG KONG:
KOREA:
TAIWAN:
HIROSE ELECTRIC HONGKONG TRADING CO., LTD.
Room 1001, West Wing, Tsim Sha Tsui Centre, 66
Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong
Phone : +852-2803-5338
Fax : +852-2591-6560
http://www.hirose-hongkong.com.hk
HIROSE KOREA CO., LTD.
1261-10, Jeoungwhang-Dong, Shihung-City,
Kyunggi-Do 429-450
Phone : +82-31-496-7000,7124
Fax : +82-31-496-7100
http://www.hirose.co.kr
HIROSE ELECTRIC TAIWAN CO., LTD.
103 8F, No.87, Zhengzhou Rd., Taipei
Phone : +886-2-2555-7377
Fax : +886-2-2555-7350
http://www.hirose-taiwan.com.tw
SINGAPORE:
INDIA:
HIROSE ELECTRIC SINGAPORE PTE. LTD.
HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE
10 Anson Road #26-16 International Plaza 079903 Unit No.03, Ground Floor, Explorer Building International Tech
Phone : +65-6324-6113
65-6324-6123
Park Whitefield Road, Bangalore 560066 Karnataka, India
Phone : +65-6324-6113
Fax : +65-6324-6123
Fax : +
http://www.hirose-singapore.com.sg
http://www.hirose-singapore.com.sg
®
6-3,Nakagawa Chuoh-2-Chome,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
+
+
TEL: 81-45-620-3526 Fax: 81-45-591-3726
http://www.hirose.com
http://www.hirose-connectors.com
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.
The contents of this catalog are current as of date of 01/2013. Contents are subject to change without notice for the purpose of improvements.
20
相关型号：
FX11LA-080P/08-SV71
0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
HRS
FX11LA-100P/10-SV
Board Stacking Connector, 110 Contact(s), 2 Row(s), Male, Straight, 0.02 inch Pitch, Surface Mount Terminal, Beige Insulator, Receptacle
HRS
FX11LA-100P/10-SV(21)
Board Stacking Connector, 110 Contact(s), 2 Row(s), Male, Straight, 0.02 inch Pitch, Surface Mount Terminal, Beige Insulator, Receptacle
HRS
FX11LA-100P/10-SV(71)
Board Stacking Connector, 100 Contact(s), 2 Row(s), Straight, 0.019 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator,
HRS
FX11LA-100P/10-SV(91)
Board Connector, 100 Contact(s), 2 Row(s), Straight, 0.02 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator
HRS
FX11LA-100P/10-SV71
0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
HRS
©2020 ICPDF网 联系我们和版权申明