FX8C-140P-SV4(93) [HRS]
Board Stacking Connector,;型号: | FX8C-140P-SV4(93) |
厂家: | HRS |
描述: | Board Stacking Connector, 连接器 |
文件: | 总25页 (文件大小:742K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
High-Speed (3.125Gbps) Stacking Connectors
FX8C Series
ꢀMechanical features
ꢀ 0.6mm Pitch
ꢀ Stacking Height : 5~16mm
ꢀꢀNumber of Contacts : 60, 80, 100, 120, 140,
160, 200, 240, 280
ꢀ SMT Coplanarity
The coplanarity of the SMT solder area lead is
ꢀ mMaaintitanigneGd autidthee high accuracy of less than 0.1mm.
The very small and guide rib is provided, and secures
0.ꢀmm self-alignment, considering the mating
operativity into accounts. ( fig.1 )
ꢀ Effective Mating Length : 2mm ( fig.1 )
ꢀ Mis-insertion Prevention
fig.1
The boss prevents mis-insertion in the board to cause
ꢀ dTuweoto-pthieecbeosCs oponsnitieocntaiondnbPosros ddiuamcteter.
In order to enhance the mating reliability for fine pitch
connector using two-pieces, the two-pieces of
connectors are combined by our unique method, and
can secure the mount position accuracy. In such a
new concept, the two-piece connected product is
prepared at every number of contacts ( The standard
mating pitch for the two-piece interconnected product
in two rows is 11mm. )
H:Stacking Height
0.ꢀ
0.ꢀ
ꢀSignal integrity features
ꢀ Insertion-Loss-to-Crosstalk-Ratio ( ICR )
The insertion-loss-to-crosstalk ratio (ICR) with
five-aggressor differential FEXT meets the IEEE
+
802.3ap specification for 3.125 Gbps with plenty
ꢀ oDfimffaerrgeinnst.ial Impedance
The differential impedance is within 100 10 ohms
at 100 ps rise time (20% to 80%).
ꢀStacking height variations (5mm~16mm)
Receptacle
FX8C-**S-SV
FX8C-** / **S11-SVJ
FX8C-**S-SV5
FX8C-** / **S11-SV5J
Header
FX8C-**P-SV
5mm
ꢀmm
7mm
9mm
11mm
10mm
FX8C-** / **P11-SVJ
FX8C-**P-SV1
FX8C-** / **P11-SV1J
11mm
12mm
14mm
1ꢀmm
FX8C-**P-SV2
FX8C-**/**P11-SV2J
FX8C-**P-SV4
FX8C-** / **P11-SV4J
FX8C-**P-SVꢀ
FX8C-** / **P11-SVꢀJ
9
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FX8C SeriesꢀHigh-Speed (3.125Gbps) Stacking Connectors
FX8C Series
ꢀProduct Specifications
Current rating 0.4A
Operating Temperature Range -55ç to +85ç Note 1. Storage Temperature Range -10ç to +60ç Note 2.
Rating
Voltage rating 100V AC Operating Humidity Range -40% to 80%
Storage Humidity Range 40% to 70%
Item
Specification
Condition
1. Insulation Resistance 100M ohms min.
250V DC
2. Withstanding voltage No flashover or insulation breakdown.
300V AC/1 minute
3. Contact Resistance
4. Vibration
80m ohms max.
100mA
No electrical discontinuity of 1µs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
5. Humidity (Steady state) Contact resistance: 100m ohms max.Insulation resistance: 100M ohms min. 9ꢀ hours at temperature of 40 2ç and humidity of 90% to 95%
6. Temperature Cycle
Contact resistance: 100m ohms max.Insulation resistance: 100M ohms min. (-55ç: 30 minutes, 15 to 35ç: 2 to 3 minutes
(-85ç: 30 minutes, 15 to 35ç: 2 to 3minutes) 5 cycles
7. Durability (Mating/un-mating) Contact resistance: 100m ohms max.
50 cycles
8. Resistance to Soldering heat No deformation of components affecting performance. Reflow: At the recommended temperature profile
Manual soldering: 3ꢀ0ç for 5 seconds
Note 1 : Includes temperature rise caused by current flow.
Note 2 : The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Note 3 : Slight variations in color of the plastic compounds do not affect form ,fit or function of the connector.
Note 4 : FX8C-*P-SV(*),FX8C-*S-SV(*) is gold plated.
Note 5 : Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a
specific part number shown.
ꢀMaterial
Part
Material
PPS
Finish
Remarks
UL94V-0
Insulator
Light brown
Contact area
Gold plated
Header Contact
Phosphor bronze
Phosphor bronze
–––––––
–––––––
Lead area
Tin plated(Note 4)
Contact area
Lead area
Gold plated
Receptacle Contact
Tin plated(Note 4)
ꢀOrdering Information
ꢀSingle Product
( )
FX8C - 120 P - SV 1 91
q
w
e
r
t
y
q Series Name : FX8C
t
Product height variationBlank : Standard (Minimum low profile)
. . . . . .
w Number of Contacts :60, 80, 100, 120, 140
1: +1mm
6:+6mm
e Connector type
P :Header
S :Receptacle
y Packaging Type
(71) : Tray packaging
r Contact type
SV :Board vertical type
(91) : Tube packaging
(92) : Embossed tape package
ꢀtwo-piece Connection Product
FX8C - 120/120 P 11 - SV 1 J
q
w
e
r
t
y u
q Series Name :FX8C
r Connector to Connector Pitch
t Contact type SV : Board vertical type
w Number of Contacts: 60∞2, 80∞2, 100∞2,
120∞2, 140∞2
y
Product Height VariationBlank : Standard (Minimum lot profile)
. . . . . .
Example: 120/120 = 240 contacts
1:+1mm
u J: two-piece connection product
6:+6mm
e Connector Type :
P : Header
S : Receptacle
*The standard packaging of the two-piece connection product is the tray packaging.
10
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FX8C SeriesꢀHigh-Speed (3.125Gbps) Stacking Connectors
ꢀSignal integrity
ꢀPin assignment
To match 100 ohm differential impedance and to reduce crosstalk, a staggered GSGSG pin assignment is recommended for
FX8C of 5mm to 9mm height, and a staggered GSSG pin assignment is recommended for 10mm to 1ꢀmm height. (G=ground
and S=signal)
GSGSG
GSSG
signal
ground
ꢀImpedance
The differential impedance is 100 10 ohm for FX8C of 5mm and 1ꢀmm height at 100 ps rise time (20% to 80%).
5mm 16mm
ꢀPropagation delay
The propagation delay is 69 and 118 ps for FX8C of 5mm and 16mm height, respectively.
ꢀInsertion loss
The differential insertion loss crosses 1 dB at 7 and 5 GHz for FX8C of 5mm and 1ꢀmm height, respectively.
5mm
16mm
11
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FX8C SeriesꢀHigh-Speed (3.125Gbps) Stacking Connectors
ꢀReturn loss
The differential return loss meets the IEEE 802.3ap specification to 10 and 7 GHz for FX8C of 5mm and 1ꢀmm height,
respectively.
5mm
16mm
ꢀNear-end crosstalk (NEXT)
The staggered GSGSG and GSSG pin assignments resulted in low differential NEXT.
5mm
16mm
12
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FX8C SeriesꢀHigh-Speed (3.125Gbps) Stacking Connectors
ꢀFar-end crosstalk (FEXT)
The staggered GSGSG and GSSG pin assignments resulted in low differential FEXT.
5mm
16mm
ꢀInsertion-loss-to-crosstalk ratio (ICR)
The insertion-loss-to-crosstalk ratio (ICR) with multi-aggressor* differential FEXT meets the extrapolated IEEE 802.3ap
specification to 7+ GHz with plenty of margins.
5mm
16mm
13
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FX8C SeriesꢀHigh-Speed (3.125Gbps) Stacking Connectors
A
B
C
D
0.3
+0.05
-0.2
+0.05
-0.2
ꢀHeader (Single Product)
0.2
P 0.ꢀ 0.1
[
]
FX8C-**P-SV
=
(C1)
Polarity mark
t0.2 0.03∞w0.25 0.03
(1.5)
(Ø0.ꢀ)
(Ø0.9)
E
0.1
(2.4)
(2.4)
Unit:mm
Part Number
CL No.
Number of Contacts
A
B
C
D
E
Tube packaging Quantity (Pieces) RoHS
60
80
100
120
140
24.60 23.00 20.70 17.40 22.20
30.60 29.00 26.70 23.40 28.20
36.60 35.00 32.70 29.40 34.20
42.60 41.00 38.70 35.40 40.20
48.60 47.00 44.70 41.40 46.20
21
17
14
12
10
FX8C-060P-SV(92) 578-0501-9-92
FX8C-080P-SV(92) 578-0503-4-92
FX8C-100P-SV(92) 578-0505-0-92
FX8C-120P-SV(92) 578-0506-2-92
FX8C-140P-SV(92) 578-0507-5-92
YES
**71 : Tray packaging product 91: Tube packaging product 92: Embossed tape packaging product
Note 1: To order the tube packaging product, please determine the quantity for delivery, multiplying the tube packaging product by an integer.
Note 2: The embossed tape packaging product is prepared for 60 and 80 contacts only. In addition, the product will be procured per reel
unit. Please refer to the delivery form item on page 12 for details.
Note 3: Tray packaging product is not for board placement with automatic equipment.
A
B
C
D
0.3
+0.05
-0.2
+0.05
-0.2
0.2
[
[
[
[
]
]
]
]
FX8C-**P-SV1
FX8C-**P-SV2
FX8C-**P-SV4
FX8C-**P-SV6
=
P 0.ꢀ 0.1
(C1)
Polarity mark
t0.2 0.03∞w0.25 0.03
(Ø0.ꢀ)
(2.4)
(Ø0.9)
(1.5)
E
0.1
(2.4)
Unit: mm
Part Number
CL No.
Number of Contacts
60
A
B
C
D
E
F
Tube packaging Quantity (Pieces) RoHS
5.45
6.45
8.45
10.45
5.45
6.45
8.45
10.45
5.45
6.45
8.45
10.45
5.45
6.45
8.45
10.45
5.45
6.45
8.45
10.45
FX8C-060P-SV1(92)
FX8C-060P-SV2(92)
FX8C-060P-SV4(92)
FX8C-060P-SV6(92)
FX8C-080P-SV1(92)
FX8C-080P-SV2(92)
FX8C-080P-SV4(92)
FX8C-080P-SV6(92)
FX8C-100P-SV1(92)
FX8C-100P-SV2(92)
FX8C-100P-SV4(92)
FX8C-100P-SV6(92)
FX8C-120P-SV1(92)
FX8C-120P-SV2(92)
FX8C-120P-SV4(92)
FX8C-120P-SV6(92)
FX8C-140P-SV1(92)
FX8C-140P-SV2(92)
FX8C-140P-SV4(92)
FX8C-140P-SV6(93)
578-0521-6-92
578-0541-3-92
578-0581-8-92
578-0601-3-92
578-0523-1-92
578-0543-9-92
578-0583-3-92
578-0603-9-92
578-0525-7-92
578-0545-4-92
578-0585-9-92
578-0605-4-92
578-0526-0-92
578-0546-7-92
578-0586-1-92
578-0606-7-92
578-0527-2-92
578-0547-0-92
578-0587-4-92
578-0607-0-93
24.60 23.00 20.70 17.40 22.20
30.60 29.00 26.70 23.40 28.20
36.60 35.00 32.70 29.40 34.20
42.60 41.00 38.70 35.40 40.20
48.60 47.00 44.70 41.40 46.20
21
80
17
YES
14
100
120
140
12
10
Note 5
** 71: Tray packaging product 91: Tube packaging product 92: Embossed tape packaging product
Note 1: To order the tube packaging product, please determine a quantity for delivery,multiplying the tube packaging product by an integer.
Note 2: The embossed tape packaging product is prepared for 60 and 80 contacts only. In addition, the product will be sold per reel unit.
Please refer to the packaging specification item on page 12 for details.
Note 3: The locator material is installed between leads for the FX8C-P-SV6 type.
Note 4: Tray packaging product is not for board placement with automatic equipment.
Note 5: (93) spec is with vacuum pick-up tape, embossed tape packaging product.
14
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FX8C SeriesꢀHigh-Speed (3.125Gbps) Stacking Connectors
A
0.3
+0.2
-0
ꢀReceptacle (Single Product)
B
+0.2
C
D
-0
[
]
FX8C-**S-SV
0.2
(C1)
=
P 0.ꢀ 0.1
(
)
Polarity mark Rear side
(1.8)
t0.2 0.03∞w0.25 0.03
(Ø0.ꢀ)
(Ø0.9)
E
0.1
(2.4)
(2.4)
Unit:mm
Part Number
CL No.
Number of Contacts
A
B
C
D
E
Tube packaging Quantity (Pieces) RoHS
60
80
24.60 23.05 20.80 17.40 22.20
30.60 29.05 26.80 23.40 28.20
36.60 35.05 32.80 29.40 34.20
42.60 41.05 38.80 35.40 40.20
48.60 47.05 44.80 41.40 46.20
21
17
FX8C-060S-SV(92)
FX8C-080S-SV(92)
FX8C-100S-SV(92)
FX8C-120S-SV(92)
FX8C-140S-SV(92)
578-0801-2-92
578-0803-8-92
578-0805-3-92
578-0806-6-92
578-0807-9-92
100
120
140
14
12
10
YES
** 71: Tray packaging product 91: Tube packaging product 92: Embossed tape packaging product
Note 1: To order the tube packaging product, please determine a quantity for delivery,multiplying the tube packaging product by an integer.
Note 2: The embossed tape packaging product is prepared for 60 and 80 contacts only. In addition, the product will be procured per reel
unit. Please refer to the packaging specification item on page 12 for details.
Note 3: Tray packaging product is not for board placement with automatic equipment.
A
B
C
D
0.3
+0.2
-0
+0.2
-0
[
]
FX8C-**S-SV5
0.2
=
P 0.ꢀ 0.1
(C1)
(
)
Polarity mark Rear side
(1.8)
t0.2 0.03∞w0.25 0.03
(Ø0.9)
(Ø0.ꢀ)
E
0.1
(2.4)
(2.4)
Unit:mm
Part Number
CL No.
Number of Contacts
A
B
C
D
E
Tube packaging Quantity (Pieces) RoHS
60
80
24.60 23.05 20.80 17.40 22.20
30.60 29.05 26.80 23.40 28.20
36.60 35.05 32.80 29.40 34.20
42.60 41.05 38.80 35.40 40.20
48.60 47.05 44.80 41.40 46.20
21
17
FX8C-060S-SV5(92
FX8C-080S-SV5(92
FX8C-100S-SV5(92
FX8C-120S-SV5(92
FX8C-140S-SV5(92
)
)
)
)
)
578-0821-0-92
578-0823-5-92
578-0825-0-92
578-0826-3-92
578-0827-6-92
100
120
140
14
12
10
YES
** 71: Tray packaging product 91: Tube packaging product 92: Embossed tape packaging product
Note 1: To order the tube packaging product, please determine a quantity for delivery,multiplying the tube packaging product by an integer.
Note 2: The embossed tape package product is prepared for 60 and 80 contacts only. In addition, the product will be procured per reel unit.
Please refer to the packaging specification item on page 12 for details.
Note 3: Tray packaging product is not for board placement with automatic equipment.
ꢀPCB mounting pattern
Header
Receptacle
[
]
FX8C**P-SV*
[
]
FX8C-**S-SV,SV5*
E
D
0.05
0.05
E
D
0.05
0.05
2.4 0.03
2.4 0.03
2.4 0.03
2.4 0.03
Polarity mark position
Ø1.1 0.05
0.ꢀ 0.05 0.35 0.03
0.ꢀ 0.03
0.35 0.03
Polarity mark position
·
Recommended metal mask thickness : t=0.15mm
·
If the inside (the connector lower side) of the SMT land isn't treated
with insulation tape and so on,
·
Recommended metal mask thickness : t=0.15mm
the area is considered as the prohibited area.(FX8C-S-SV5 isn't applied.)
15
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FX8C SeriesꢀHigh-Speed (3.125Gbps) Stacking Connectors
A
B
C
D
E
0.3
0.3
+0.05
_0.2
ꢀ
Header (two-piece Connection Product)
FX8C-**/**P11-SVJ
+0.05
_0.2
[
]
0.2
Polarity mark
F
0.1
(4.5)
Unit:mm
RoHS
Part Number
CL No.
Number of Contacts
60∞2
A
B
C
D
E
F
FX8C-060/060P11-SVJ(71) 578-0651-1-71
FX8C-080/080P11-SVJ(71) 578-0653-7-71
FX8C-100/100P11-SVJ(71) 578-0655-2-71
FX8C-120/120P11-SVJ(71) 578-0656-5-71
FX8C-140/140P11-SVJ(71) 578-0657-8-71
31.70
37.70
43.70
49.70
55.70
24.70
30.70
36.70
42.70
48.70
23.00
29.00
35.00
41.00
47.00
20.70
26.70
32.70
38.70
44.70
17.40
23.40
29.40
35.40
41.40
22.20
28.20
34.20
40.20
46.20
80∞2
100∞2
YES
120∞2
140∞2
Note 1: The two-piece connection product is packaged by tray.
Note 2: Tray packaging product is not for board placement with automatic equipment.
A
0.3
0.3
B
C
[
[
[
[
]
]
]
]
FX8C-**/**P11-SV1J
FX8C-**/**P11-SV2J
FX8C-**/**P11-SV4J
FX8C-**/**P11-SV6J
+0.05
_0.2
+0.05
D
E
_0.2
0.2
Polarity mark
F
0.1
(4.5)
Unit: mm
RoHS
Part Number
CL No.
Number of Contacts
A
B
.
C
D
E
F
G
H
FX8C-
FX8C-
FX8C-
FX8C-
FX8C-
FX8C-
FX8C-
FX8C-
0
0
0
0
0
0
0
0
60/
60/
60/
60/
80/
80/
80/
80/
0
0
0
0
0
0
0
0
60P11-SV1J(71) 578-0671-9-71
60P11-SV2J(71) 578-0691-6-71
60P11-SV4J(71) 578-0731-9-71
60P11-SV6J(71) 578-0751-6-71
80P11-SV1J(71) 578-0673-4-71
80P11-SV2J(71) 578-0693-1-71
80P11-SV4J(71) 578-0733-4-71
80P11-SV6J(71) 578-0753-1-71
4.35
5.35
7.35
9.35
4.35
5.35
7.35
9.35
4.35
5.35
7.35
9.35
4.35
5.35
7.35
9.35
4.35
5.35
7.35
9.35
5.45
6.45
8.45
10.45
5.45
6.45
8.45
10.45
5.45
6.45
8.45
10.45
5.45
6.45
8.45
10.45
5.45
6.45
8.45
10.45
60∞2
31.70 24.70 23.00
37.70 30.70 29.00
43.70 36.70 35.00
49.70 42.70 41.00
55.70 48.70 47.00
20.70 17.40 22.20
26.70 23.40 28.20
32.70 29.40 34.20
38.70 35.40 40.20
44.70 41.40 46.20
80∞2
100∞2
120∞2
140∞2
FX8C-100/100P11-SV1J(71) 578-0675-0-71
FX8C-100/100P11-SV2J(71) 578-0695-7-71
FX8C-100/100P11-SV4J(71) 578-0735-0-71
FX8C-100/100P11-SV6J(71) 578-0755-7-71
FX8C-120/120P11-SV1J(71) 578-0676-2-71
FX8C-120/120P11-SV2J(71) 578-0696-0-71
FX8C-120/120P11-SV4J(71) 578-0736-2-71
FX8C-120/120P11-SV6J(71) 578-0756-0-71
FX8C-140/140P11-SV1J(71) 578-0677-5-71
FX8C-140/140P11-SV2J(71) 578-0697-2-71
FX8C-140/140P11-SV4J(71) 578-0737-5-71
FX8C-140/140P11-SV6J(71) 578-0757-2-71
YES
Note 1: The two-piece connection product is packaged by tray.
Note 2: Tray packaging product is not for board placement with automatic equipment.
Note 3: The locator material is installed between leads for the FX8C-**/**P11-SV6J type.
16
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FX8C SeriesꢀHigh-Speed (3.125Gbps) Stacking Connectors
ꢀReceptacle (two-piece Connection Product)
A±0.3
B±0.3
[
]
+0.2
-0
+0.2
FX8C-**/**S11-SVJ
C
D
-0
E±0.2
(
)
Polarity mark Rear side
F±0.1
(4)
Unit:mm
Part Number
CL No.
Number of Contacts
60∞2
A
B
C
D
E
F
RoHS
FX8C-060/060S11-SVJ(71)
FX8C-080/080S11-SVJ(71)
FX8C-100/100S11-SVJ(71)
FX8C-120/120S11-SVJ(71)
FX8C-140/140S11-SVJ(71)
578-0901-7-71
578-0903-2-71
578-0905-8-71
578-0906-0-71
578-0907-3-71
31.70 24.60 23.05 20.80 17.40 22.20
37.70 30.60 29.05 26.80 23.40 28.20
43.70 36.60 35.05 32.80 29.40 34.20
49.70 42.60 41.05 38.80 35.40 40.20
55.70 48.60 47.05 44.80 41.40 46.20
80∞2
YES
100∞2
120∞2
140∞2
Note 1: The two-piece connection product is packaged by tray.
Note 2: Tray packaging product is not for board placement with automatic equipment.
A±0.3
B±0.3
+0.2
C
-0
+0.2
D
-0
E±0.2
[
]
FX8C-**/**S11-SV5J
(
)
Polarity mark Rear side
F±0.1
(4)
Unit:mm
RoHS
Part Number
CL No.
Number of Contacts
60∞2
A
B
C
D
E
F
FX8C-060/060S11-SV5J(71)
FX8C-080/080S11-SV5J(71)
FX8C-100/100S11-SV5J(71)
FX8C-120/120S11-SV5J(71)
FX8C-140/140S11-SV5J(71)
578-0921-4-71
578-0923-0-71
578-0925-5-71
578-0926-8-71
578-0927-0-71
31.70 24.60 23.05 20.80 17.40 22.20
37.70 30.60 29.05 26.80 23.40 28.20
43.70 36.60 35.05 32.80 29.40 34.20
49.70 42.60 41.05 38.80 35.40 40.20
55.70 48.60 47.05 44.80 41.40 46.20
80∞2
YES
100∞2
120∞2
140∞2
Note 1: The two-piece connection product is packaged by tray.
Note 2: Tray packaging product is not for board placement with automatic equipment.
ꢀPCB mounting pattern
Header
Receptacle
[
]
[
]
FX8C-** / **P 11-SVJ, SV1J
FX8C-** / **P 11-SVJ, SV5J
E
F
0.05
0.05
F
E
0.05
0.05
2.4 0.03
2.4 0.03
2.4 0.03
2.4 0.03
Polarity mark position
0.ꢀ 0.05
0.35 0.03
0.ꢀ 0.05 0.35 0.03
Ø0.7 0.05
Ø1.1 0.05
Ø1.1 0.05
·
Recommended metal mask thickness : t=0.15mm
Polarity mark position
Recommended metal mask thickness : t=0.15mm
·
If the inside (the connector lower side) of the SMT land isn't treated
with insulation tape and so on,
·
the area is considered as the prohibited area.(Except FX8C-**/**S11-SV5J)
17
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FX8C SeriesꢀHigh-Speed (3.125Gbps) Stacking Connectors
ꢀDetailed Figure After Joint Removal
(Single Product in two-piece Connection Product)
Header
[FX8C-** / **P 11-SVJ]
[FX8C-** / **P 11-SV1J]
=
P 0.ꢀ 0.1
=
P 0.ꢀ 0.1
Polarity mark
Polarity mark
(Ø0.ꢀ)
(1.5)
(Ø0.9) t0.2 0.03∞w0.25 0.03
(1.5)
(Ø0.ꢀ)
(Ø0.9)
(2.4)
t0.2 0.03∞w0.25 0.03
(2.4)
(2.4)
(2.4)
Receptacle
[FX8C-** / **S 11-SVJ]
[FX8C-** / **S 11-SV5J]
=
P 0.ꢀ 0.1
=
P 0.ꢀ 0.1
(
)
Polarity mark Rear side
(
)
Polarity mark Rear side
(1.8)
(Ø0.9)
(Ø0.ꢀ)
t0.2 0.03∞w0.25 0.03
(1.8)
(Ø0.9)
(Ø0.ꢀ)
t0.2 0.03∞w0.25 0.03
(2.4)
(2.4)
(2.4)
(2.4)
18
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FX8C SeriesꢀHigh-Speed (3.125Gbps) Stacking Connectors
ꢀConnector Precautions
1. Tolerance Clearance on Mating Side
The effective contact length of the product is set to 2.0mm. Please use the product
so as to set to less than 1.2mm the clearance between the header and the receptacle in the mating process.
2. Fixation Between Mounting Boards
If this product is fixed only by mating force, Please consider the fixing method so as not to apply loads such as vibration, shock and so
on.
3. Stacking General Tolerance in Mating
+
–
0.3
0.2
Stack
Amm
A
mm
Note: Please Note that the above tolerance of the stacking height doesn't include the solder paste thickness.
4. Handling Two-piece Connection Product
Both joint bar edges of the two-piece connection product are fixed by joints, while the mating process can't be performed in that state.
Before the mating process, please remove the joint bars as if pull it up. (Don't remove the joint bars before mounting on the board. )
Before removing joint bar
After removing joint bar
5. Mounting Temperature Profile (Reference)
HRS test conditions
Test boardGlass epoxy 1ꢀ1mm∞100mm∞1.ꢀmm thick
Solder method
Solder composition
2ꢀ0
240
220
(MAX 250ç)
:Reflow
:Paste,
9ꢀ.5%Sn/3%Ag/0.5%Cu
: 0.15mm thick
: 2 cycles
220ç
200ç
200
180
1ꢀ0
Metal mask
Reflow cycles
150ç
140
The temperature profile is based on the above
conditions.
(ç)
In individual applications the actual temperature may
vary, depending on solder paste type,
volume/thickness and board size/thickness. Consult
your solder paste and equipment manufacturer for
specific recommendations.
0
90 120s
MAX ꢀ0s
Pre-heating time
(150 to 200ç)
Soldering Time
(220ç min.)
Time (Second)
6. Cautions
This product is made as the thin formed product in order to be miniaturized.
19
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FX8C SeriesꢀHigh-Speed (3.125Gbps) Stacking Connectors
ꢀPackaging Type
Packaging Type
Number of Contacts
Packaged Product Pieces
Sales Unit
60 contacts
21 pieces
80 contacts
17 pieces
100 contacts 120 contacts 140 contacts
14 pieces 12-pieces 10pieces
Tube packaging
Deliver the multiplied pieces. (Example) In case of 60 contacts,21 pieces, 42-pieces,...
550mm 2mm
Total Tube Length
Tape Width
44mm
56mm
72mm
Product Pitch
12mm
Emboss Reel Diameter
Packaged Product Pieces
Sales Unit
Embossed Tape Packaging
Refer to the table on page 13 in this catalog.
Refer to the table on page 13 in this catalog.
Per reel
*The above packaging type is , as listed for the single product only.
In addition, the packaging type of the two-piece connection product is the tray packaging.
ꢀPackaging Specification
[
]
Tube packaging
ꢀHeader
[
[
[
[
[
]
)
]
)
]
)
]
)
]
)
(
(
(
FX8-**P-SV 91
550
2
(A)
FX8-**P-SV1 91
FX8-**P-SV2 91
MADE IN JAPAN
FX8C-P-SV
(
FX8-**P-SV4 91
Polarity mark
(
FX8-**P-SV6 91
ꢀReceptacle
(A)
550
2
[
[
]
]
(
(
)
)
Polarity mark
FX8C-**S-SV 91
FX8C-**S-SV5 91
MADE IN JAPAN
FX8C-S-SV
(
)
Polarity mark Rear side
P/S
Part Number
A
9
(
)
)
)
)
)
)
)
FX8C-**P-SV0 91
(
10
11
13
15
7.4
12.4
FX8C-**P-SV1 91
(
Header
FX8C-**P-SV2 91
(
FX8C-**P-SV4 91
(
FX8C-**P-SV6 91
(
FX8C-**S-SV0 91
Receptacle
(
FX8C-**S-SV5 91
20
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FX8C SeriesꢀHigh-Speed (3.125Gbps) Stacking Connectors
[
]
Embossed Tape Package
ꢀCarrier Size Pattern
UNREELING DIRECTION
D
C
12
2
4
0.4 or 0.5
1.5
A
B
* The above figure represents the case
of the receptacle connector.
Unit: mm
Product Pieces
P/S
Part Number
A
B
C
5.2
6.2
7.2
9.2
11.2
4.3
9.3
D
E
(
)
)
)
)
)
)
)
5.5
5.5
5.5
5.5
5.5
6.0
6.0
7.9
7.9
7.9
7.9
7.9
8.4
8.4
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1000 pieces
1000 pieces
0500 pieces
0500 pieces
0500 pieces
1000 pieces
0500 pieces
FX8C-**P-SV0 92
Ø370
Ø370
Ø330
Ø370
Ø370
Ø330
Ø370
(
FX8C-**P-SV1 92
(
Note 2
Header
FX8C-**P-SV2 92
(
FX8C-**P-SV4 92
(
FX8C-**P-SV6 92
(
Note 1
Note 2
FX8C-**S-SV0 92
Receptacle
(
FX8C-**S-SV5 92
** : Number of Contacts
21
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FX8C SeriesꢀHigh-Speed (3.125Gbps) Stacking Connectors
ꢀReel State Size Pattern (FREE)
[
][ ]
2
44.4 5ꢀ.4 72.4
TRAILER
LEADER(400mm MIN)
EQUIPPED
(1000 CONNECTORS)
EMBOSSED CARRIER TAPE
TOP COVER TAPE
10 EMPTY COMPONENT COMPARTMENTS MIN
10 EMPTY COMPONENT COMPARTMENTS MIN
Note 1: E dimension for FX8C-140S-SV(92) is Ø370, core dia. is Ø100.
Note 2: E dimension for FX8C-120P-SV2(92), FX8C-120S-SV5(92), FX8C-140S-SV5(92) is Ø380.
22
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
0.6mm Pitch Stacking Height 3mm to 16mm Connector
FX8, FX8C Series
FX8 Series
FX8C Series
Note that FX8 series and FX8C series are not mated with each other.
■Features
1. Stacking Height 3mm to 16mm available
The board to board stacking height can correspond to
3mm~16mm.
●Stacking Height 3,4mm-FX8 Series
2. SMT Coplanarity
The coplanarity of the SMT solder area lead is maintained at
the high accuracy of less than 0.1mm.
3,4mm
3. Mating Guide
The very small and guide rib is provided, and secures 0.6mm
self-alignment, considering the mating operativity into accounts.
4. Mis-insertion Prevention
The boss prevents mis-insertion in the board to cause due to
the boss position and boss diameter.
●Stacking Height 5 to 16mm-FX8C Series
5 to 16mm
■Applications
Note pc, business equipments, which require miniaturization or light-weight
A166
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FX8, FX8C Seriesꢀ0.6mm Pitch Stacking Height 3mm to 16mm Connector
FX8C Series
ꢀProduct Specifications
Current rating 0.4A
Operating Temperature Range -55ç to +85ç Note 1. Storage Temperature Range -10ç to +60ç Note 2.
Rating
Voltage rating 100V AC Operating Humidity Range -40% to 80%
Storage Humidity Range 40% to 70%
Item
Specification
Condition
1. Insulation Resistance 100M ohms min.
250V DC
2. Withstanding voltage No flashover or insulation breakdown.
300V AC/1 minute
3. Contact Resistance
4. Vibration
80m ohms max.
100mA
No electrical discontinuity of 1µs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
5. Humidity (Steady state) Contact resistance: 100m ohms max.Insulation resistance: 100M ohms min. 96 hours at temperature of 40ç and humidity of 90% to 95%
6. Temperature Cycle
Contact resistance: 100m ohms max.Insulation resistance: 100M ohms min. (-55ç: 30 minutes, 15 to 35ç: 2 to 3 minutes
(-85ç: 30 minutes, 15 to 35ç: 2 to 3minutes) 5 cycles
7. Durability (Mating/un-mating) Contact resistance: 100m ohms max.
50 cycles
8. Resistance to Soldering heat No deformation of components affecting performance. Reflow: At the recommended temperature profile
Manual soldering: 360ç for 5 seconds
Note 1 : Includes temperature rise caused by current flow.
Note 2 : The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Note 3 : Slight variations in color of the plastic compounds do not affect form ,fit or function of the connector.
Note 4 : FX8C-*P-SV(*),FX8C-*S-SV(*) is gold plated.
Note 5 : Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a
specific part number shown.
ꢀMaterial
Part
Material
PBS
Finish
Remarks
UL94V-0
Insulator
Light brown
Contact area
Gold plated
Header Contact
Phosphor bronze
Phosphor bronze
–––––––
–––––––
Lead area
Tin plated(Note 4)
Contact area
Lead area
Gold plated
Receptacle Contact
Tin plated(Note 4)
ꢀOrdering Information
ꢀSingle Product
( )
FX8C - 120 P - SV 1 91
q
w
e
r
t
y
q Series Name : FX8C
t
Product height variationBlank : Standard (Minimum low profile)
. . . . . .
w Number of Contacts :60, 80, 90, 120, 140
1: +1mm
3:+3mm
e Connector type
P :Header
S :Receptacle
y Packaging Type
(71) : Tray packaging
r Contact type
SV :Board vertical type
(91) : Tube packaging
(92) : Embossed tape package
ꢀtwo-piece Connection Product
FX8C - 120/120 P 11 - SV 1 J
q
w
e
r
t
y u
q Series Name :FX8C
r Connector to Connector Pitch
t Contact type SV : Board vertical type
w Number of Contacts: 60∞2, 80∞2, 90∞2,
100∞2, 120∞2, 140∞2
y
Product Height VariationBlank : Standard (Minimum lot profile)
. . . . . .
Example: 120/120 = 240 contacts
1:+1mm
u J: two-piece connection product
3:+3mm
e Connector Type :
P : Header
S : Receptacle
*The standard packaging of the two-piece connection product is the tray packaging.
A174
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FX8, FX8C Seriesꢀ0.6mm Pitch Stacking Height 3mm to 16mm Connector
BStacking Height Variation
FX8C-**S-SV
FX8C-**/**S11-SVJ
FX8C-**S-SV5
FX8C-**/**S11-SV5J
Receptacle
Header
FX8C-**P-SV
5mm
6mm
7mm
9mm
11mm
10mm
11mm
12mm
14mm
16mm
FX8C-**/**P11-SVJ
FX8C-**P-SV1
FX8C-**/**P11-SV1J
FX8C-**P-SV2
FX8C-**/**P11-SV2J
FX8C-**P-SV4
FX8C-**/**P11-SV4J
FX8C-**P-SV6
FX8C-**/**P11-SV6J
A175
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FX8, FX8C Seriesꢀ0.6mm Pitch Stacking Height 3mm to 16mm Connector
ꢀHeader (Single Product)
[
]
FX8C-**P-SV
Unit:mm
Part Number
CL No.
Number of Contacts
A
B
C
D
E
Tube packaging Quantity (Pieces) RoHS
60
80
100
120
140
24.60 23.00 20.70 17.40 22.20
30.60 29.00 26.70 23.40 28.20
36.60 35.00 32.70 29.40 34.20
42.60 41.00 38.70 35.40 40.20
48.60 47.00 44.70 41.40 46.20
21
17
14
12
10
FX8C-060P-SV(92) 578-0501-9-92
FX8C-080P-SV(92) 578-0503-4-92
FX8C-100P-SV(92) 578-0505-0-92
FX8C-120P-SV(92) 578-0506-2-92
FX8C-140P-SV(92) 578-0507-5-92
YES
Note 2: The embossed tape packaging product is prepared for 60
and 80 contacts only. In addition, the product will be
procured per reel unit. Please refer to the delivery form item
on page A182 for details.
Note 3: Tray packaging product is not for board placement with
automatic equipment.
**71 : Tray packaging product 91: Tube packaging product
92 : Embossed tape packaging product
Note 1: To order the tube packaging product, please determine the
quantity for delivery, multiplying the tube packaging product
by an integer.
[
[
[
[
]
]
]
]
FX8C-**P-SV1
FX8C-**P-SV2
FX8C-**P-SV4
FX8C-**P-SV6
Unit: mm
Part Number
CL No.
Number of Contacts
60
A
B
C
D
E
F
Tube packaging Quantity (Pieces) RoHS
5.45
6.45
8.45
10.45
5.45
6.45
8.45
10.45
5.45
6.45
8.45
10.45
5.45
6.45
8.45
10.45
5.45
6.45
8.45
10.45
FX8C-060P-SV1(92)
FX8C-060P-SV2(92)
FX8C-060P-SV4(92)
FX8C-060P-SV6(92)
FX8C-080P-SV1(92)
FX8C-080P-SV2(92)
FX8C-080P-SV4(92)
FX8C-080P-SV6(92)
FX8C-100P-SV1(92)
FX8C-100P-SV2(92)
FX8C-100P-SV4(92)
FX8C-100P-SV6(92)
FX8C-120P-SV1(92)
FX8C-120P-SV2(92)
FX8C-120P-SV4(92)
FX8C-120P-SV6(92)
FX8C-140P-SV1(92)
FX8C-140P-SV2(92)
FX8C-140P-SV4(92)
FX8C-140P-SV6(93)
578-0521-6-92
578-0541-3-92
578-0581-8-92
578-0601-3-92
578-0523-1-92
578-0543-9-92
578-0583-3-92
578-0603-9-92
578-0525-7-92
578-0545-4-92
578-0585-9-92
578-0605-4-92
578-0526-0-92
578-0546-7-92
578-0586-1-92
578-0606-7-92
578-0527-2-92
578-0547-0-92
578-0587-4-92
578-0607-0-93
24.60 23.00 20.70 17.40 22.20
30.60 29.00 26.70 23.40 28.20
36.60 35.00 32.70 29.40 34.20
42.60 41.00 38.70 35.40 40.20
48.60 47.00 44.70 41.40 46.20
21
80
17
YES
14
100
120
140
12
10
Note 5
** 71: Tray packaging product 91: Tube packaging product 92: Embossed tape packaging product
Note 1: To order the tube packaging product, please determine a quantity for delivery,multiplying the tube packaging product by an integer.
Note 2: The embossed tape packaging product is prepared for 60 and 80 contacts only. In addition, the product will be sold per reel unit.
Please refer to the packaging specification item on page A182 for details.
Note 3: The locator material is installed between leads for the FX8C-P-SV6 type.
Note 4: Tray packaging product is not for board placement with automatic equipment.
Note 5: (93) spec is with vacuum pick-up tape, embossed tape packaging product.
A176
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FX8, FX8C Seriesꢀ0.6mm Pitch Stacking Height 3mm to 16mm Connector
ꢀReceptacle (Single Product)
[
]
FX8C-**S-SV
Unit:mm
Part Number
CL No.
Number of Contacts
A
B
C
D
E
Tube packaging Quantity (Pieces) RoHS
60
80
24.60 23.05 20.80 17.40 22.20
30.60 29.05 26.80 23.40 28.20
36.60 35.05 32.80 29.40 34.20
42.60 41.05 38.80 35.40 40.20
48.60 47.05 44.80 41.40 46.20
21
17
FX8C-060S-SV(92)
FX8C-080S-SV(92)
FX8C-100S-SV(92)
FX8C-120S-SV(92)
FX8C-140S-SV(92)
578-0801-2-92
578-0803-8-92
578-0805-3-92
578-0806-6-92
578-0807-9-92
100
120
140
14
12
10
YES
** 71: Tray packaging product 91: Tube packaging product 92: Embossed tape packaging product
Note 1: To order the tube packaging product, please determine a quantity for delivery,multiplying the tube packaging product by an integer.
Note 2: The embossed tape packaging product is prepared for 60 and 80 contacts only. In addition, the product will be procured per reel
unit. Please refer to the packaging specification item on page A182 for details.
Note 3: Tray packaging product is not for board placement with automatic equipment.
[
]
FX8C-**S-SV5
Unit:mm
Part Number
CL No.
Number of Contacts
A
B
C
D
E
Tube packaging Quantity (Pieces) RoHS
60
80
24.60 23.05 20.80 17.40 22.20
30.60 29.05 26.80 23.40 28.20
36.60 35.05 32.80 29.40 34.20
42.60 41.05 38.80 35.40 40.20
48.60 47.05 44.80 41.40 46.20
21
17
FX8C-060S-SV5(92
FX8C-080S-SV5(92
FX8C-100S-SV5(92
FX8C-120S-SV5(92
FX8C-140S-SV5(92
)
)
)
)
)
578-0821-0-92
578-0823-5-92
578-0825-0-92
578-0826-3-92
578-0827-6-92
100
120
140
14
12
10
YES
** 71: Tray packaging product 91: Tube packaging product 92: Embossed tape packaging product
Note 1: To order the tube packaging product, please determine a quantity for delivery,multiplying the tube packaging product by an integer.
Note 2: The embossed tape package product is prepared for 60 and 80 contacts only. In addition, the product will be procured per reel unit.
Please refer to the packaging specification item on page A182 for details.
Note 3: Tray packaging product is not for board placement with automatic equipment.
BPCB mounting pattern
A177
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FX8, FX8C Seriesꢀ0.6mm Pitch Stacking Height 3mm to 16mm Connector
ꢀ
Header (two-pieces Connection Product)
FX8C-**/**P11-SVJ
[
]
Unit:mm
RoHS
Part Number
CL No.
Number of Contacts
60∞2
A
B
C
D
E
F
FX8C-060/060P11-SVJ(71) 578-0651-1-71
FX8C-080/080P11-SVJ(71) 578-0653-7-71
FX8C-100/100P11-SVJ(71) 578-0655-2-71
FX8C-120/120P11-SVJ(71) 578-0656-5-71
FX8C-140/140P11-SVJ(71) 578-0657-8-71
31.70
37.70
43.70
49.70
55.70
24.70
30.70
36.70
42.70
48.70
23.00
29.00
35.00
41.00
47.00
20.70
26.70
32.70
38.70
44.70
17.40
23.40
29.40
35.40
41.40
22.20
28.20
34.20
40.20
46.20
80∞2
100∞2
YES
120∞2
140∞2
Note 1: The two-piece connection product is packaged by tray.
Note 2: Tray packaging product is not for board placement with automatic equipment.
[
[
[
[
]
]
]
]
FX8C-**/**P11-SV1J
FX8C-**/**P11-SV2J
FX8C-**/**P11-SV4J
FX8C-**/**P11-SV6J
Unit: mm
RoHS
Part Number
CL No.
Number of Contacts
A
B
.
C
D
E
F
G
H
FX8C-
FX8C-
FX8C-
FX8C-
FX8C-
FX8C-
FX8C-
FX8C-
0
0
0
0
0
0
0
0
60/
60/
60/
60/
80/
80/
80/
80/
0
0
0
0
0
0
0
0
60P11-SV1J(71) 578-0671-9-71
60P11-SV2J(71) 578-0691-6-71
60P11-SV4J(71) 578-0731-9-71
60P11-SV6J(71) 578-0751-6-71
80P11-SV1J(71) 578-0673-4-71
80P11-SV2J(71) 578-0693-1-71
80P11-SV4J(71) 578-0733-4-71
80P11-SV6J(71) 578-0753-1-71
4.35
5.35
7.35
9.35
4.35
5.35
7.35
9.35
4.35
5.35
7.35
9.35
4.35
5.35
7.35
9.35
4.35
5.35
7.35
9.35
5.45
6.45
8.45
10.45
5.45
6.45
8.45
10.45
5.45
6.45
8.45
10.45
5.45
6.45
8.45
10.45
5.45
6.45
8.45
10.45
60∞2
31.70 24.70 23.00
37.70 30.70 29.00
43.70 36.70 35.00
49.70 42.70 41.00
55.70 48.70 47.00
20.70 17.40
26.70 23.40
32.70 29.40
38.70 35.40
44.70 41.40
22.20
28.20
34.20
40.20
46.20
80∞2
100∞2
120∞2
140∞2
FX8C-100/100P11-SV1J(71) 578-0675-0-71
FX8C-100/100P11-SV2J(71) 578-0695-7-71
FX8C-100/100P11-SV4J(71) 578-0735-0-71
FX8C-100/100P11-SV6J(71) 578-0755-7-71
FX8C-120/120P11-SV1J(71) 578-0676-2-71
FX8C-120/120P11-SV2J(71) 578-0696-0-71
FX8C-120/120P11-SV4J(71) 578-0736-2-71
FX8C-120/120P11-SV6J(71) 578-0756-0-71
FX8C-140/140P11-SV1J(71) 578-0677-5-71
FX8C-140/140P11-SV2J(71) 578-0697-2-71
FX8C-140/140P11-SV4J(71) 578-0737-5-71
FX8C-140/140P11-SV6J(71) 578-0757-2-71
YES
Note 1: The two-piece connection product is packaged by tray.
Note 2: Tray packaging product is not for board placement with automatic equipment.
Note 3: The locator material is installed between leads for the FX8C-**/**P11-SV6J type.
A178
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FX8, FX8C Seriesꢀ0.6mm Pitch Stacking Height 3mm to 16mm Connector
ꢀReceptacle (two-piece Connection Product)
[
]
FX8C-**/**S11-SVJ
Unit:mm
RoHS
Part Number
CL No.
Number of Contacts
60∞2
A
B
C
D
E
F
FX8C-060/060S11-SVJ(71)
FX8C-080/080S11-SVJ(71)
FX8C-100/100S11-SVJ(71)
FX8C-120/120S11-SVJ(71)
FX8C-140/140S11-SVJ(71)
578-0901-7-71
578-0903-2-71
578-0905-8-71
578-0906-0-71
578-0907-3-71
31.70 24.60 23.05 20.80 17.40 22.20
37.70 30.60 29.05 26.80 23.40 28.20
43.70 36.60 35.05 32.80 29.40 34.20
49.70 42.60 41.05 38.80 35.40 40.20
55.70 48.60 47.05 44.80 41.40 46.20
80∞2
YES
100∞2
120∞2
140∞2
Note 1: The two-piece connection product is packaged by tray.
Note 2: Tray packaging product is not for board placement with automatic equipment.
[
]
FX8C-**/**S11-SV5J
Unit:mm
RoHS
Part Number
CL No.
Number of Contacts
60∞2
A
B
C
D
E
F
FX8C-060/060S11-SV5J(71)
FX8C-080/080S11-SV5J(71)
FX8C-100/100S11-SV5J(71)
FX8C-120/120S11-SV5J(71)
FX8C-140/140S11-SV5J(71)
578-0921-4-71
578-0923-0-71
578-0925-5-71
578-0926-8-71
578-0927-0-71
31.70 24.60 23.05 20.80 17.40 22.20
37.70 30.60 29.05 26.80 23.40 28.20
43.70 36.60 35.05 32.80 29.40 34.20
49.70 42.60 41.05 38.80 35.40 40.20
55.70 48.60 47.05 44.80 41.40 46.20
80∞2
YES
100∞2
120∞2
140∞2
Note 1: The two-piece connection product is packaged by tray.
Note 2: Tray packaging product is not for board placement with automatic equipment.
BPCB mounting pattern
A179
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FX8, FX8C Seriesꢀ0.6mm Pitch Stacking Height 3mm to 16mm Connector
BDetailed Figure After Joint Removal
(Single Product in two-piece Connection Product)
A180
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FX8, FX8C Seriesꢀ0.6mm Pitch Stacking Height 3mm to 16mm Connector
BConnector Precautions
1. Tolerance Clearance on Mating Side
The effective contact length of the product is set to 2.0mm. Please use the product
so as to set to less than 12mm the clearance between the header and the receptacle in the mating process.
2. Fixation Between Mounting Boards
If this product is fixed only by mating force, Please consider the fixing method so as not to apply loads such as vibration, shock and so
on.
3. Stacking General Tolerance in Mating
+
–
0.3
0.2
Stack
Amm
A
mm
Note: Please Note that the above tolerance of the stacking height doesn't include the solder paste thickness.
4. Handling Two-piece Connection Product
Both joint bar edges of the two-piece connection product are fixed by joints, while the mating process can't be performed in that state.
Before the mating process, please remove the joint bars as if pull it up. (Don't remove the joint bars before mounting on the board. )
Before removing joint bar
After removing joint bar
5. Mounting Temperature Profile (Reference)
HRS test conditions
Test boardGlass epoxy 161mm∞100mm∞1.6mm thick
Solder method
Solder composition
260
240
220
(MAX 250ç)
:Reflow
:Paste,
96.5%Sn/3%Ag/0.5%Cu
: 0.15mm thick
: 2 cycles
220ç
200ç
200
180
160
Metal mask
Reflow cycles
150ç
140
The temperature profile is based on the above
conditions.
(ç)
In individual applications the actual temperature may
vary, depending on solder paste type,
volume/thickness and board size/thickness. Consult
your solder paste and equipment manufacturer for
specific recommendations.
0
90 120s
MAX 60s
Pre-heating time
(150 to 200ç)
Soldering Time
(220ç min.)
Time (Second)
6. Cautions
This product is made as the thin formed product in order to be miniaturized.
A181
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FX8, FX8C Seriesꢀ0.6mm Pitch Stacking Height 3mm to 16mm Connector
BPackaging Type
Packaging Type
Number of Contacts
Packaged Product Pieces
Sales Unit
60 contacts
21 pieces
80 contacts
17 pieces
100 contacts 120 contacts 140 contacts
14 pieces 12-pieces 10pieces
Tube packaging
Deliver the multiplied pieces. (Example) In case of 20 contacts,21 pieces, 4two-pieces,...
550mm 2mm
Total Tube Length
Tape Width
44mm
56mm
72mm
Product Pitch
12mm
Emboss Reel Diameter
Packaged Product Pieces
Sales Unit
Embossed Tape Packaging
Refer to the table on page A183 in this catalog.
Refer to the table on page A183 in this catalog.
Per reel
*The above packaging type is , as listed for the single product only.
In addition, the packaging type of the two-piece connection product is the tray packaging.
BPackaging Specification
[
]
Tube packaging
ꢀHeader
[
[
[
[
[
]
)
]
)
]
)
]
)
]
)
(
(
(
FX8-**P-SV 91
FX8-**P-SV1 91
FX8-**P-SV2 91
(
FX8-**P-SV4 91
(
FX8-**P-SV6 91
ꢀReceptacle
[
[
]
]
(
(
)
)
FX8C-**S-SV 91
FX8C-**S-SV5 91
P/S
Part Number
A
9
(
)
)
)
)
)
)
)
FX8C-**P-SV0 91
(
10
11
13
15
7.4
12.4
FX8C-**P-SV1 91
(
Header
FX8C-**P-SV2 91
(
FX8C-**P-SV4 91
(
FX8C-**P-SV6 91
(
FX8C-**S-SV0 91
Receptacle
(
FX8C-**S-SV5 91
A182
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FX8, FX8C Seriesꢀ0.6mm Pitch Stacking Height 3mm to 16mm Connector
[
]
Embossed Tape Package
ꢀCarrier Size Pattern
Unit: mm
Product Pieces
P/S
Part Number
A
B
C
5.2
6.2
7.2
9.2
11.2
4.3
9.3
D
E
(
)
)
)
)
)
)
)
5.5
5.5
5.5
5.5
5.5
6.0
6.0
7.9
7.9
7.9
7.9
7.9
8.4
8.4
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1000 pieces
1000 pieces
0500 pieces
0500 pieces
0500 pieces
1000 pieces
0500 pieces
FX8C-**P-SV0 92
Ø370
Ø370
Ø330
Ø370
Ø370
Ø330
Ø370
(
FX8C-**P-SV1 92
(
Header
FX8C-**P-SV2 92
(
Note 2
FX8C-**P-SV4 92
(
FX8C-**P-SV6 92
(
Note 1
Note 2
FX8C-**S-SV0 92
Receptacle
(
FX8C-**S-SV5 92
** : Number of Contacts
ꢀReel State Size Pattern (FREE)
Note 1: E dimension for FX8C-140S-SV(92) is Ø370, core dia. is Ø100.
Note 2: E dimension for FX8C-120P-SV2(92), FX8C-120S-SV5(92), FX8C-140S-SV5(92) is Ø380.
A183
相关型号:
FX8C-140P-SV6(71)
Board Stacking Connector, 140 Contact(s), 2 Row(s), Male, Straight, 0.024 inch Pitch, Surface Mount Terminal, Locking, Brown Insulator, Plug, ROHS COMPLIANT
HRS
FX8C-140S-SV(21)
Board Stacking Connector, 140 Contact(s), 2 Row(s), Female, Straight, 0.024 inch Pitch, Surface Mount Terminal, Brown Insulator, Receptacle
HRS
FX8C-140S-SV(68)
Board Stacking Connector, 140 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal,
HRS
FX8C-140S-SV(91)
Board Stacking Connector, 140 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Receptacle, ROHS COMPLIANT
HRS
FX8C-140S-SV(92)
Board Stacking Connector, 140 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Receptacle, ROHS COMPLIANT
HRS
FX8C-140S-SV(95)
Board Connector, 140 Contact(s), 2 Row(s), Female, Straight, 0.024 inch Pitch, Surface Mount Terminal, Locking, Brown Insulator, Receptacle
HRS
FX8C-140S-SV5(21)
Board Stacking Connector, 140 Contact(s), 2 Row(s), Female, Straight, 0.024 inch Pitch, Surface Mount Terminal, Brown Insulator, Receptacle
HRS
FX8C-140S-SV5(71)
Board Stacking Connector, 140 Contact(s), 2 Row(s), Female, Straight, 0.024 inch Pitch, Surface Mount Terminal, Locking, Brown Insulator, Receptacle, ROHS COMPLIANT
HRS
©2020 ICPDF网 联系我们和版权申明