GT1-1P-2022/2.2C [HRS]
Highly efficient and reliable single motion crimp termination allows high volume production with semiautomatic equipment.;型号: | GT1-1P-2022/2.2C |
厂家: | HRS |
描述: | Highly efficient and reliable single motion crimp termination allows high volume production with semiautomatic equipment. |
文件: | 总20页 (文件大小:693K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Coaxial cable connection of Antennas, Sensors, and Com m unication Trunk Lines
Term ination of coaxial cables in autom otive, m edical and instrum entation applications
utilizes a single m otion to crim p the center conductor, shield and outer Insulator.
GT1 Series
— Connectors for coaxial cables —
<
Several types and configurations: In-line, board m ounted, com binations of
>
coaxial cable with signal/power. Multi-position.
Features
Cost efficient term ination
Highly efficient and reliable single m otion crim p term ination allows high volum e production with sem i-
autom atic equipm ent.
Lock-release latching system
Shock / vibration resistant electrical connections
Verification of the full contact insertion
Excellent shielding effects.
Excellent High Frequency Perform ance
Refer to V.S.W.R. data on the following pages.
7
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT1 Series
BTest Data (Using Sem i-rigid Cable)
High Frequency Characteristics (V.S.W.R.)
3.0
2.8
2.6
2.4
2.2
2.0
1.8
1.6
1.4
1.2
1
2.0
3.0GH
Z
1.0
Note: Data taken using fully assem blied and connected GT1-1S-HU and GT1-1P-DSA.
BDiagram of GT1 In-line Type Structure
6
1
2
7
8
4
3
5
PARTS LIST
Part Num ber
GT1-1P-HU
Part
Num ber Used
Material
PA(UL94V-0)
PBT(UL94V-0)
Brass
Finish
1
2
3
4
5
6
7
8
Housing
Insulator
1
1
----
----
GT1-1P-2428/1.6C
GT1-1S-HU
Crim p term inal
Outer term inal
Housing
1
1
1
1
1
1
Tin plating
Tin plating
----
Brass
PA(UL94V-0)
PBT(UL94V-0)
Phosphor bronze
Brass
Insulator
----
GT1-1S-2428/1.6C
Crim p term inal
Outer term inal
Tin plating
Tin plating
8
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT1 Series
BTerm ination sequence
Coaxial Cable Term inal Finish Diagram
L1
L2
L3
Strip Length
Part Num ber
GT1-1S-2428 /1.6C
GT1-1P-2428 /1.6C
GT1-1S-30 /1.6C
GT1-1P-30 /1.6C
CL No.
L1
L2
6
L3
Part Num ber
GT1-1S-30 /2.9C
GT1-1P-30 /2.9C
GT1-1S-2428 /F5C
GT1-1P-2428 /F5C
GT1-1S-30 /F5C
GT1-1P-30 /F5C
CL No.
L1
L2
L3
751-0001-3
751-0002-6
751-0029-2
751-0030-1
751-0015-8
751-0014-5
751-0032-7
751-0031-4
751-0033-0
751-0034-2
751-0037-0
751-0038-3
3.8
10.5
4.9
6.8
11.3
GT1-1S-2022 /2.9C
GT1-1P-2022 /2.9C
4.9
6.8
11.3
1Crim p the cable to the term inal.
2Insert the term inal in the housing until is fully locked.
3Com pletion
9
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT1 Series
Term inals for coaxial shielded cable
23
F Connector Term inals
8.8
Indication of
Condductor Size(AWG)
Conductor Size
(AWG)
Inner Insulator
Diam eter
Outer
Part Num ber
CL No.
Packaging
1,200
Diam eter
GT1-1S-2428 /1.6C 751-0001-3 #24 to 28 or equivalent
GT1-1S-30 /1.6C 751-0029-2 #30 or equivalent
GT1-1S-2022 /2.9C 751-0015-8 #20 to 22 or equivalent
GT1-1S-30 /2.9C 751-0032-7 #30 or equivalent
GT1-1S-2428 /F5C 751-0033-0 #24 to 28 or equivalent
GT1-1S-30 /F5C 751-0037-0 #30 or equivalent
GT1-1S-2428 /F4C 751-0046-1 #24 to 28 or equivalent
1.5 to 2.0m m 2.6 to 3.4m m
2.8 to 3.5m m
Item
Material
PBT
Finish
*
*
4.6 to 5.0m m
2.5 to 3.5m m
0,800
Insulator
Color: Dark gray
Tin plating
Tin plating
Crim p term inal
Outer term inal
Brass
Brass
4.0m m
Note: Products m arked with an asterisk (*) indicate polyethylene foam insulation.
M Connector Term inals
24.25
10.4
Indication of
Condductor Size(AWG)
Conductor Size
(AWG)
Inner Insulator
Diam eter
Outer
Part Num ber
CL No.
Packaging
0,800
Diam eter
GT1-1P-2428 /1.6C 751-0002-6 #24 to 28 or equivalent
GT1-1P-30 /1.6C 751-0030-1 #30 or equivalent
GT1-1P-2022 /2.9C 751-0014-5 #20 to 22 or equivalent
GT1-1P-30 /2.9C 751-0031-4 #30 or equivalent
GT1-1P-2428 /F5C 751-0034-2 #24 to 28 or equivalent
GT1-1P-30 /F5C 751-0038-3 #30 or equivalent
GT1-1P-2428 /F4C 751-0047-4 #24 to 28 or equivalent
1.5 to 2.0m m 2.6 to 3.4m m
2.8 to 3.5m m
Item
Material
Finish
*
*
4.6 to 5.0m m
2.5 to 3.5m m
0,600
Insulator
PBT
Brass
Brass
Color: Dark gray
Tin plating
Tin plating
Crim p term inal
Outer term inal
4.0m m
Note: Products m arked with an asterisk (*) indicate polyethylene foam insulation.
1 0
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT1 Series
For Single-Conductor coaxial shielded cable
F Connectors
25.5
18
Housing
Part Num ber
GT1-1S-HU
CL No.
Material
PA
Color
751-0003-9
Light gray
M Connectors
Housing
27
19.5
17.8
Part Num ber
GT1-1P-HU
CL No.
Material
PA
Color
751-0004-1
Light gray
Panel Housing
15.4
27
Part Num ber
GT1-1PP-HU
CL No.
Item
Material
PA
Finish
Color
Light gray
----
Housing
751-0007-0 Ground plate
Press fitting nut
----
Brass
Brass
Tin plating
Nickel
----
1 1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT1 Series
Printed Circuit Type (Right angle through hole type)
BRecom m ended Board Mounting Pattern
13.5
15.4
For outer conductor
For inner conductor
Part Num ber
GT1-1P-DS
CL No.
Item
Material
PBT
Finish
Color
Housing
----
----
Light gray
Insulator
PBT
Dark gray
751-0006-7
0.64X1.1 Term inal
Outer term inal
Ground term inal
Brass
Tin plating
Tin plating
----
----
----
----
Brass
Stainless
Use m ounting screws of M3 with nom inal diam eter 3L-6 (for a panel thickness of 0.16m m )
Printed Circuit Type (Straight through hole type)
BRecom m ended Board Mounting Pattern
For outer conductor
24
15.4
16.5
13.5
19
For inner conductor
Part Num ber
GT1-1P-DSA
CL No.
Item
Material
PBT
Finish
----
Color
Housing
Insulator
Light gray
Dark gray
----
PBT
----
751-0005-4
0.64X1.1 Term inal
Outer term inal
Brass
Brass
Tin plating
Tin plating
----
Use m ounting screws of M3 with nom inal diam eter 3L-6 (for a panel thickness of 0.16m m )
1 2
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT1 Series
For Single-Conductor coaxial shielded cable
13.1
F Connector
5.5
Housing (Integrated retainer type)
25
BShow n w ith inserted retainer
Part Num ber
GT1K-1S-HU
CL No.
Material
PBT
Color
751-0016-0
Light gray
Note: Mates only with GT1K-1P-DS and GT1K-1PA-DS.
* Refer to Page 14 for use of the GT1K-1P-HU retainer.
M Connectors
B
Recom m ended Board
Mounting Pattern
4.9
Printed Circuit Board Type
(Right-angle through hole, top lock type)
15.6
18
For outer conductor
For inner conductor
24
Part Num ber
GT1K-1P-DS
CL No.
Item
Material
PBT
Finish
----
Color
Light gray
Dark gray
----
Housing
Insulator
0.64X1.1 Term inal
Outer term inal
Cover
PBT
----
751-0017-3
Brass
Tin plating
Tin plating
Nickel
Brass
----
Stainless
----
Note 1: Mates only with GT1K-1S-HU.
Note 2: Use m ounting screws of M3 with nom inal diam eter 3L-6 (for a panel thickness of 0.16m m )
Printed Circuit Board Type
(Right-angle through hole, side lock type)
14.5
24.7
B
Recom m ended Board
Mounting Pattern
15
For inner conductor
Part Num ber
GT1K-1PA-DS
CL No.
Item
Material
PBT
Finish
----
Color
Light gray
Dark gray
----
For outer conductor
Housing
Insulator
PBT
----
751-0035-5
0.64X1.1 Term inal
Outer term inal
Brass
Brass
Tin plating
Tin plating
----
Note 1: Mates only with GT1K-1S-HU.
Note 2: Use m ounting screws of M3 with nom inal diam eter 3L-6 (for a panel thickness of 0.16m m )
Panel
1 3
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT1 Series
BMethod of Using the GT1K-1S Retainer
a. Insert so that the term inal
lo ckin g ta b is in s e rte d
between the top surface
o f th e te rm in a l a n d th e
housing.
b. Pu s h in w h ile ch a n g in g
the angle of the retainer
u n til th e fro n t s u rfa ce
com es to a stop.
c. Press the rear portion of
th e re ta in e r a n d s n a p it
into the locked position.
d. If locking is not com plete,
press the rear portion of
th e re ta in e r a g a in w h ile
pulling it backward.
* Check that all locations are locked.
1 4
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT1 Series
Tw o-position type-Each Single-Conductor coaxial Cable
F Connectors
Housings
25.5
27
Part Num ber
GT1-2S-HU(20)
GT1-2S-HU(20)
GT1-2S-HU(21)
CL Num ber
751-0011-7-20
751-0011-7-20
751-0011-7-21
Material
PBT
Color
Light gray
Orange
Blue
Note: Retainer is optional.
Retainers (Used w ith GT1-2S-HU)
21.3
Part Number
A Configuration
B
Show n w ith inserted retainer
Cable Dia.
A Configuration Part Num ber
CL No.
Material
PBT
Color
o
o
/ A / B
White
o
/ 3
o
/ 3
GT1-2S-33R 751-0045-9
GT1-2S-53R 751-0043-3
GT1-2S-55R 751-0044-6
Dark gray
Light blue
o
/ 5
o
/ 3
o
/ 5
o
/ 5
Note 1: This item should be m ounted to the GT1-2PP-HU housing after the insertion of term inals.
Note 2: Retainer is optional.
BGT1-2S-HU
Retainer (used w ith GT1-2S-HU and GT1-2PP-HU)
Show n w ith tem porarily inserted retainer
30.55
18.15
BGT1-2PP-HU
Show n w ith tem porarily inserted retainer
35.55
Part Num ber
GT1-2P/S-R
CL Num ber
751-0013-2
Material
PBT
Color
Dark gray
Note: Mount this item after provisional insertion into the housing, or after term inal insertion.
1 5
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT1 Series
M Connectors
Housings
32
30.7
Mounting bracket
attachment side
BRecom m ended Mounting Bracket
Dim ensions (T=1.5m m )
17.75
5
2.8
Ground terminal
1.5
1.3
Tin plating
5
14.5
8
Part Num ber
CL No.
Color
Rem arks
GT1-2PP-HU(10) 751-0010-4-20
GT1-2PP-HU(10) 751-0010-4-10
GT1-2PP-HU(20) 751-0010-4-20
GT1-2PP-HU(21) 751-0010-4-21
GT1-2PP-HU(40) 751-0010-4-40
GT1-2PP-HU(41) 751-0010-4-41
Note: Retainer is optional.
Light gray
Light gray
Orange
Blue
With ground term inal
Without ground term inal
With ground term inal
With ground term inal
Without ground term inal
Without ground term inal
Item
Material
PBT
Finish
Color: Light gray
Color: Orange
Color: Blue
Housing
Orange
Blue
Ground term inal
Brass
Tin plating
Retainers (Used w ith GT1-2PP-HU)
22.95
A Configuration
Part Number
B
Show n w ith inserted retainer
Bracket Mounting
portion
Cable Dia.
A Configuration Part Num ber
CL No.
Color
o
o
/ A / B
White
o
o
/ 3
GT1-2PP-33R 751-0042-0
GT1-2PP-53R 751-0040-5
GT1-2PP-55R 751-0041-8
/ 3
Material
PBT
Color
White
Dark gray
Light blue
o
/ 5
o
/ 5
Dark gray
Light blue
o
/ 5
o
/ 3
Note 1: This item should be m ounted to the GT1-2PP-HU housing after the insertion of term inals.
Note 2: Retainer is optional.
1 6
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT1 Series
Pow er Supply Term inals
F Connector Term inals
2.3
2.8
Conductor Size Inner Insulator
Part Num ber
GT7-2022SCF
CL No.
Dim ension A Packaging Material
5,000
Finish
(AWG)
Diam eter
757-0001-1
#20 to 22
1.4 to 2.4m m
19
Copper alloy Tin plating
GT7A-2022SCF 757-0003-7
#20 to 22
2.6 to 3.1m m
3,000
Note 1: Sold by the reel. (See above table for num ber of Packaging.)
Note 2: This com ponent is used only with applicable HRS housings.
M Connector Term inals
2.8
2.7
Conductor Size Inner Insulator
Part Num ber
GT7-2022SCF
CL No.
Dim ension A Packaging Material
5,000
Finish
(AWG)
Diam eter
757-0001-1
#20 to 22
1.4 to 2.4m m
19
Copper alloy Tin plating
GT7A-2022SCF 757-0003-7
#20 to 22
2.6 to 3.1m m
3,000
Conductor Size Inner Insulator
Part Num ber
CL No.
Packaging Material
3,000
Finish
(AWG)
Diam eter
*
Reserved for
GT7-1618PCF
GT7-2022PCF
GT7A-2022PCF
#16 to 18
1.8 to 2.7m m
product expansion
757-0002-4
757-0004-0
#20 to 22
#20 to 22
1.4 to 2.4m m
2.6 to 3.1m m
5,000
3,000
Brass
Tin plating
Note 1: Sold by the reel. (See above table for num ber of Packaging.)
Note 2: This com ponent is used only with applicable HRS housings.
1 7
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT1 Series
Com bination Type (One Single-Conductor Coaxial Cables + One Pow er contact)
F Connectors
Housing
13.1
27
15.9
Part Num ber
GT1-1/1S-HU
CL No.
Material
PBT
Color
751-0026-4
Light gray
Note: Retainer is optional.
Retainer (Used w ith GT1-1/ 1S-HU)
18.7
Part Num ber
GT1-1/1S-R
CL Num ber
751-0028-0
Material
PBT
Color
Dark gray
Note: Mount this item after provisional insertion into the housing, or after term inal insertion.
1 8
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT1 Series
M Connectors
B
Recom m ended Mounting Bracket Dim ensions (T=1.5m m )
Housings
17.75
5
2.8
1.5
Tin plating
5
14.5
8
13.7
33
21.1
Mounting bracket
attachment side
Mounting bracket
attachm ent side
Part Num ber
CL No.
Rem arks
GT1-1 /1PP-HU(00) 751-0025-1-10
GT1-1 /1PP-HU(10) 751-0025-1-10
GT1-1 /1PP-HU(11) 751-0025-1-11
1.5m m
With ground term inal
Without ground term inal
With ground term inal
Item
Material
PBT
Finish
1.5m m
Housing
Light gray
Tin plating
1.0m m
Ground term inal Phosphor bronze
Note: Used with separate retainer (GT1-1/1PP-R).
Retainer (exclusively for GT1-1/ 1PP-HU)
16.8
Part Num ber
GT1-1/1PP-R
CL Num ber
751-0027-7
Material
PBT
Color
Dark gray
Note: Mount this item after provisional insertion into the housing, or after term inal insertion.
1 9
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT1 Series
Com bination Type (Tw o Single-Conductor Coaxial Cables + One Pow er contact)
F Connectors
Housing
25.5
27
Part Num ber
GT1-2/1S-HU
CL No.
Material
PBT
Color
751-0019-9
Light gray
Note1: Mates only with GT1-2/1PP-DS and GT1-2/1PP-HU.
Note2: Used with separate retainer (GT1-2/1S-R).
Retainer (used w ith GT1-2S-HU and GT1-2PP-HU)
18.7
Part Num ber
GT1-2/1S-R
CL No.
Material
PBT
Color
751-0021-0
Dark gray
Note: Mount this item after provisional insertion into the housing, or after term inal insertion.
2 0
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT1 Series
M Connectors
Housings
B
Recom m ended Mounting Bracket
Dim ensions (T=1.5m m )
17.75
33
30.7
5
2.8
Mounting bracket
attachment side
1.5
Tin plating
5
Ground terminal
14.5
8
Mounting bracket
attachm ent side
Part Num ber
CL No.
Rem arks
GT1-2/1PP-HU(00) 751-0018-6-10
GT1-2/1PP-HU(10) 751-0018-6-10
GT1-2/1PP-HU(11) 751-0018-6-11
Note1: Mates only with GT1-2/1S-HU.
1.5m m
With ground term inal
Without ground term inal
With ground term inal
Item
Housing
Material
PBT
Finish
1.5m m
Light gray
Tin plating
1.0m m
Ground term inal Phosphor bronze
Note2: Used with separate retainer (GT1-2/1PP-R).
16.8
Retainer (used w ith GT1-2/ 1PP-HU)
Part Num ber
CL Num ber
Material
PBT
Color
GT1-2/1PP-R(22) 751-0020-8-22
Dark gray
Note: Mount this item after provisional insertion into the housing, or after term inal insertion.
24.6
BRecom m ended Board
Printed Circuit Board Type
Mounting Pattern
38.1
29.5
Ground terminal
Ground terminal
Panel
B
Recom m ended Panel
19.75
19.1
15.9
Cut-out
Part Num ber
GT1-2/1PP-DS
CL No.
Part
Material
PBT
Finish
----
Color
0.3
Housing
Light gray
Ground term inal
Ground plate
Tub term inal for DS 070
0.64X1.1 Term inal
Insulator
Phosphor bronze
Brass
Tin plating
Tin plating
Tin plating
Tin plating
----
----
----
751-0022-3
Brass
----
----
Brass
PBT
Dark gray
----
Outer term inal
Brass
Tin plating
Note1: Mates only with GT1-2/1PP-DS and GT1-2/1PP-HU.
Note 2: Use m ounting screws of M3 with nom inal diam eter 3L-6 (for a panel thickness of 1.6m m )
Board
2 1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT1 Series
Products Listed Below are of the Com bination Type (Two Term inals for Use with Single-Conductor Shielded
Cable + One Power Supply Term inal) with Key Positions that Differ from the Products Listed on Previous Pages
F Connectors
Housings
25.5
27
Part Num ber
CL No.
Material
PBT
Color
Light gray
Blue
GT1-2/1S-HU(A)(21)
GT1-2/1S-HU(A)(21)
751-0024-9-21
751-0024-9-21
PBT
Note1: Mates only with GT1-2/1P-DS.
Note2: Used with separate retainer.
B
Recom m ended Board
Mounting Pattern
M Connectors
18.4
Printed Circuit Board Type
MAX2
24.6
27.7
Panel
B
Recom m ended Panel
Cut-out
19.75
19.1
15.9
12.25
0.3
Board
Item
Material
PBT
Finish
Color
----
----
Light gray
Housing
Blue
0.64X1.1 Term inal
Insulator
Brass
PBT
Tin plating
----
----
Dark gray
----
Part Num ber
CL No.
Color
Light gray
Blue
GT1-2/1P-DS(21) 751-0023-6-21
GT1-2/1P-DS(21) 751-0023-6-21
Note1: Mates only with GT1-2/1S-HU(A).
Outer term inal
Brass
Brass
Tin plating
Tin plating
Tub term inal for DS 070
----
Note 2: Use m ounting screws of M3 with nom inal diam eter 3L-6 (for a panel thickness of 1.6m m )
2 2
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT1 Series
BMating, Cross-Sectional View
Mating, Top View
Exam ples of Printed Circuit Board Type and Cable Type
38.3
GT1-2/1S-HU(A)
A
A
GT1-2/1P-DS
Cross Section AA
GT1-2/1P-DS+GT1-2/1S-HU(A)
Part Num ber
Part
Num ber Used Material
Finish
1
2
3
4
5
6
7
8
9
Housing
Insulator
1
2
2
2
1
1
2
2
2
PBT
PBT
UL94V-0
UL94V-0
GT1-2/1P-DS(A)
0.64 X 1.1 term inal
Outer term inal
Housing
Brass
Brass
PBT
Tin plating
Tin plating
UL94V-0
GT1-2/1S-HU(A)
GT1-2/1S-HU(A)
Retainer
PBT
UL94V-0
Insulator
PBT
UL94V-0
GT1-1S-2428/1.6C Crim p term inal
Outer term inal
Phosphor bronze Tin plating
Brass
Tin plating
Exam ple of Cable-to-Cable Type
The coupled, cross-sectional view of the GT7 term inals of the GT1-2/1 Series appears below.
46.9
GT1-2/1P-DS
GT1-2/1S-HU
A
A
Cross Section AA
Mating, Top View
Part Num ber
Currently, the GT7 Series term inals are used for the power supply of the GT1 Series com bination type.
See Page 157 for details about the GT7 Series.
1
2
3
4
5
6
GT1-2/1PP-HU
GT1-2/1PP-R
GT7-2022PCF
GT1-2/1S-HU
GT1-2/1S-R
Part Num ber
GT1-1/1S-HU
GT1-2/1S-HU
GT1-1/1PP-HU
GT1-2/1PP-HU
Term inal
GT7-2022SCF, GT7A-2022SCF
GT7-2022PCF, GT7A-2022PCF
GT7-2022SCF
2 3
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT1 Series
Accessories
4.5
9.8
Brackets (for M Connector Housing)
T=1
1.1
12
8
Part Num ber
GT-BK(01)
GT-BK(01)
CL No.
Material
SPCC
Finish
751-0039-6-22
751-0039-6-01
Tin plating
Zinc plating
Note 1: This product can be attached to GT1-1PP-HU, GT1-1/1PP-HU, and GT1-2/1PP-HU.
Note 2: Please use the tin plated item when m aking a ground connection.
5.85
F Term inal Shield Cover
6.2
Mounted Condition Installed
3.9
Part Num ber
CL No.
Item
Material
SPCC
Finish
Top Shield Cover
Bottom Shield Cover
Tin plating
Zinc plating
GT1-1S-1.6CSB
751-0009-5
Note: This product cannot be used with GT1K-1S-HU.
5.85
M Term inal Shield Plate
7.8
Mounted Condition Installed
3.9
Part Num ber
CL No.
Item
Material
Brass
Finish
Top Shield Cover
Bottom Shield Cover
GT1-1P-1.6CSB
751-0008-2
Tin plating
Note: The product norm ally has sufficient perform ance without using the shield plate; however, when used in especially high frequency bands (e.g.,
1 GHz and higher), use of the shield plate is recom m ended so that even higher shielding effectiveness m ay be obtained.
2 4
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT1 Series
BTerm ination Tools
User's m anuals are available. Please ask your Hirose Electric account representative.
Autom atic Crim ping Machine
Specifications
Item
Specification
Stroke Length
Num ber of strokes
Weight
Specification
1.5ton
Rem arks
30m m
200spm (50Hz)
75kg
240spm (60Hz)
AC100V
Motor
0.2kW
Crim ping speed
2000 to 4000 per day
Part Num ber CM-105
Hand Tool
Hand Press
●Harness Tools
Part No.
CL No.
Applicator Part No.
Hand Tool Part No.
GT1-TA2428/1.6SHC
GT1-TA2428/1.6PHC
Hand Press Part No.
GT1-1S-2428/1.6C 780-0001-9
GT1-1P-2428/1.6C 780-0008-8
Applicator 105-GT1-1S-2428
Applicator 105-GT1-1P-2428
(Note)
GT1
Table top twin crimper
Applicator 105-GT1-1S-30(Stranded Wire)
Applicator 105-GT1-1S-30ID(Solid Wire)
Applicator 105-GT1-1P-30(Stranded Wire)
Applicator 105-GT1-1P-30ID(Solid Wire)
Applicator 105-GT1-2022/2.2S
GT1-1S-30 /1.6C
GT1-1P-30 /1.6C
----
----
GT1-1S-2022/2.2C
GT1-1P-2022/2.2C
GT1-1S-2022/2.9C
GT1-1P-2022/2.9C
GT1-1S-2428/F5C
GT1-1P-2428/F5C
----
----
----
----
----
----
Applicator 105-GT1-2022/2.2P
Applicator 105-GT1-2022/2.9S
Applicator 105-GT1-2022/2.9P
Applicator 105-GT1-2428/F5CS(Solid Wire)
Applicator 105-GT1-2428/F5CP(Solid Wire)
*Crim p height setting tables are available for each cable type. Please contact your nearest Hirose Electric account representative.
Different cables will require different crim p height settings.
2 5
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT1 Series
BTerm inal Extraction Tool
1) For one lance
68
18
1Insert the extraction tool from the coupling end.
2Push the lance upward and pull out the term inal.
Part Num ber
GT-PO(A)
CL No.
Used with connectors
GT1K-1S-HU GT1-2S-HU GT1-2PP-HU GT1-1/1S-HU
GT1-1/1PP-HU GT1-2/1S-HU GT1-2/1PP-HU GT1-2/1S-HU(A)
780-0006-2
2) For tw o lances
64
1Insert the extraction tool from the coupling end.
2Push and separate both lances and pull out the term inal.
Part Num ber
GT1-C-PO
CL No.
Used with connectors
902-5020-1
GT1-1S-HU GT1-1P-HU GT1-1PP-HU
2 6
相关型号:
GT1-1P-DS
Highly efficient and reliable single motion crimp termination allows high volume production with semiautomatic equipment.
HRS
GT1-1P-DSA
Highly efficient and reliable single motion crimp termination allows high volume production with semiautomatic equipment.
HRS
GT1-1PP-HU
Highly efficient and reliable single motion crimp termination allows high volume production with semiautomatic equipment.
HRS
GT1-1S-1.6CSB
Highly efficient and reliable single motion crimp termination allows high volume production with semiautomatic equipment.
HRS
©2020 ICPDF网 联系我们和版权申明