GT11-1822PCF(70) [HRS]
Connector Accessory;型号: | GT11-1822PCF(70) |
厂家: | HRS |
描述: | Connector Accessory PC 连接器 连接器支架 |
文件: | 总16页 (文件大小:3368K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Coaxial cable connection of Antennas, Sensors, and CommunicationTrunk Lines
GT11 Series
— Connectors for shielded cables —
Features
A housing lance systems has been used to prevent binding between contacts.
Lock-release latching system
84
GT11 Series
For Double-Conductor shielded cable
24.3
F Connectors
Outer terminals
8
RoHS
YES
Item
Material
Color/Finish
Part Number
HRS No.
Applicable Cable
GT11-2S-5.2C(70) 761-0002-3-70
GT11-2S-6.0C(70) 761-0028-7-70
4.5 to 5.2mm
5.8 to 6.2mm
Outer terminal
Insulator
Brass
PBT
Tin plating
Dark Gray
Note :The suitable terminals might differ depending on the internal structure of the cable.
1.95
1.95
InnerTerminals
18
22
RoHS
YES
Part Number
HRS No.
Conductor Size (AWG)
Material
Finish
Packaging
reel
GT11-1822SCF(70) 761-0004-9-70
GT11-2428SCF(70) 761-0020-5-70
#18 to 22
#24 to 28
Phosphor
Bronze
Tin plating 8,000 pcs
/
*Sold by the reel.
25.3
M Connectors
Outer terminals
9.6
RoHS
YES
Part Number
HRS No.
Applicable Cable
Item
Material
Color/Finish
GT11-2P-5.2C(70) 761-0001-0-70
GT11-2P-6.0C(70) 761-0027-4-70
4.5 to 5.2mm
5.8 to 6.2mm
Outer terminal
Insulator
Brass
PBT
Tin plating
Dark Gray
Note :The suitable terminals might differ depending on the internal structure of the cable.
0.64
InnerTerminals
1
18
22
RoHS
YES
Part Number
HRS No.
Conductor Size (AWG) Material
Finish
Packaging
8,000 pcs
GT11-1822PCF(70) 761-0003-6-70
GT11-2428PCF(70) 761-0019-6-70
#18 to 22
Brass
Tin plating
/reel
#24 to 28
85
GT11 Series
For Double-Conductor shielded cable
B
Shown with inserted retainer
F Connectors
Housing
30
CAV No
RoHS
Part Number
GT11-2S-HU
HRS No.
Material
PBT
Color
YES
761-0005-1
Light Gray
M Connectors
Housing
B
Shown with inserted retainer
35.8
RoHS
YES
Part Number
GT11-2P-HU
HRS No.
Material
PBT
Color
761-0006-4
Light Gray
Housing
B
B
Shown with inserted retainer
Fully mated connector assemblies
RoHS
YES
Part Number
HRS No.
Material
PBT
Color
GT11N-2PP-HU
761-0008-0
Light Gray
86
GT11 Series
M Connectors
B
Recommended Board Mounting Pattern
Housing
RoHS
Part Number
HRS No.
Material
Finish
Color
PBT
Brass
PBT
----
Light Gray
----
Dark Gray
----
Tin plating
----
Tin plating
YES
GT11-2P-DS(70) 761-0007-7-70
Phosphor bronze
B
B
Recommended
Fully mated connector
Housing (GangType)
Panel Cut-out
assemblies
B
Recommended Board
Mounting Pattern
RoHS
YES
Part Number
HRS No.
Material
Finish
Color
PBT
Brass
PBT
----
Light Gray
----
Dark Gray
----
Tin plating
----
Tin plating
GT11X-2/2P-DS(70) 761-0022-0-70
Phosphor bronze
B
Recommended Board Mounting Pattern
Housing (StraightType)
B
Fully mated connector assemblies
GT11-2S-HU
GT11-2P-DSA(70)
RoHS
YES
Part Number
Material
Finish
Color
HRS No.
PBT
Brass
Phosphor bronze
Phosphor bronze
----
Light Gray
Tin plating
Tin plating
Tin plating
----
----
----
GT11-2P-DSA(70) 761-0038-0-70
87
GT11 Series
Waterproof type For Double-Conductor shielded cable
45.4
F Connectors
Housing
32.5
Part Number
HRS No.
Material
PBT
Color
RoHS
YES
GT11W-2S-HU 761-0024-6
Light Gray
M Connectors
Housing
20.5
44.2
24.1
B
Fully mated connector assemblies
Part Number
GT11W-2P-HU
HRS No.
Material
PBT
Color
RoHS
YES
761-0023-3
Light Gray
Housing
20.5
46.7
26.6
B
Fully mated connector assemblies
HRS No.
-----------
Color
RoHS
YES
Part Number
Material
PBT
Light Gray
GT11WM-2P-HU
(It is planning)
88
GT11 Series
Retainer (Used with GT11W-2S-HU and GT11W-2P-HU)
Part Number
GT11W-6.0R
HRS No.
Material
RoHS
YES
PBT
761-0025-9
Silicon rubber compound
Note : Waterproofness will depend on the cable. Please contact a Hirose Electric
sales representative for further information when using this product.
Retainer (Used with GT11W-2S-HU and GT11W-2P-HU)
(It is planning)
Part Number
GT11W-5.2R
HRS No.
-------------
Material
RoHS
YES
PBT
Silicon rubber compound
Note : Waterproofness will depend on the cable. Please contact a Hirose Electric
sales representative for further information when using this product.
Retainer Cover
9.45
22.45
(It is planning)
Part Number
HRS No.
Material
RoHS
YES
PBT
GT11WM-COVER(A),(B) -------------
Note : for GT11WM-5.2R
Silicon rubber compound
89
GT11 Series
B
Termination sequence
Insert the internal terminals into the Outer terminals.
Strip the cable.
The joined side of the crimp portion faces upward
(for both male and female).
Shield
Jacket
Cut the shield and expose the wire.
Wire
Crimp the Outer terminal.
The shield must be visible.
Cut back the shield above the jacket and wrap with
conductive tape.
conductive tape
Jig used: Outside tube caulking jig.
(Refer to Page 103 for detail.)
Strip the wire and form it.
Conductor
Crimp the wire to the internal terminal.
Mount the retainer to complete the task.
less than 1mm
Jig used: Automatic crimping machine.
(Refer to Page 103 for detail.)
Refer to Page 96 for information
about the retainer mounting
method.
90
GT11 Series
B
Retainer Mounting Method
a. Insert so that the terminal
locking tab is inserted
between the top surface of
the terminal and the
housing.
b. Push in while changing
the angle of the retainer
until the front surface
comes to a stop.
c. Press the rear portion of
the retainer and snap it
into the locked position.
d. If locking is not complete,
press the rear portion of
the retainer again while
pulling it backward.
* Check that all locations are locked.
91
GT11 Series
B
TerminationTools
User's manuals are available. Please ask your Hirose Electric account representative.
Automatic Crimping Machine (for 2-conductor and 8-conductor cable)
The photograph shows just
one example.The product is
subject to change.
Specifications
Item
Capacity
Specification
1.5tons
Remarks
Stroke
30mm
Number of strokes
Weight
200spm (50Hz)
75kg
200spm (60Hz)
AC100V
Motor
0.2kW
Crimping speed
2000 to 4000 pcs/hour
Part Number CM-105
Note: See the table below for the applicator product number.
Product No.
Applicator Product No. (2 conductor) Applicator Product No. (8 conductor)
GT11-1822SCF(70)
GT11-1822PCF(70)
GT11-2428SCF(70)
GT11-2428PCF(70)
Applicator 105-GT11-1822S-2
Applicator 105-GT11-1822P-2
Applicator 105-GT11-2428S-2
Applicator 105-GT11-2428P-2
Applicator 105-GT11-1822S
Applicator 105-GT11-1822P
Applicator 105-GT11-2428S
Applicator 105-GT11-2428P
OuterTerminal Crimping tool
Please contact a sales representative for information about the outer terminal crimping tool.
92
GT11 Series
For 8-Conductor shielded cable
1.95
1.95
F Connectors
InnerTerminal
RoHS
YES
Part Number
GT11-1822SCF(70) 761-0004-9-70
GT11-2428SCF(70) 761-0020-5-70
HRS No.
Conductor Size (AWG)
#18 to 22
Material
Phosphor bronze
Phosphor bronze
Finish
Tin plating
Tin plating
#24 to 28
13
Insulator
8.4
2.8
RoHS
YES
Part Number
GT11-8DS-2.8C
HRS No.
761-0014-2
Material
PBT
Outer terminals
12.7
9.15
0.4
RoHS
YES
Part Number
GT11-8DS-5C(70) 761-0015-5-70
HRS No.
Material
Brass
Finish
Tin plating
93
GT11 Series
Shield Plate
12.7
4.5
9
Part Number
GT11-8DS-SB(70) 761-0016-8-70
HRS No.
Material
Brass
Finish
Tin plating
RoHS
YES
Housing
15.8
34
RoHS
Part Number
GT11-8DS-HU
HRS No.
761-0017-0
Material
PBT
YES
Retainer (used with GT11-8DS-HU)
4.4
14.1
2.7
6
RoHS
YES
Part Number
GT11-8DS-6R
HRS No.
761-0018-3
Material
PBT
94
GT11 Series
1
0.64
M Connectors
InnerTerminals
Part Number
GT11-1822PCF(70) 761-0003-6-70
GT11-2428PCF(70) 761-0019-6-70
HRS No.
Conductor Size (AWG)
#18 to 22
Material
Brass
Brass
Finish
Tin plating
Tin plating
RoHS
YES
* Sold by the reel (8,000 pcs/reel)
#24 to 28
18.4
Insulator
7.5
8.4
2.8
RoHS
YES
Part Number
GT11-8DP-2.8C
HRS No.
761-0009-2
Material
PBT
Outer terminal
14
10.25
0.4
RoHS
YES
Part Number
GT11-8DP-5C(70) 761-0010-1-70
HRS No.
Material
Brass
Finish
Tin plating
95
GT11 Series
24.65
Shield Plate
0.4
6.5
RoHS
YES
Part Number
GT11-8DP-SB(70) 761-0011-4-70
HRS No.
Material
Brass
Finish
Tin plating
Housing
39.6
25
RoHS
Part Number
GT11-8DP-HU
HRS No.
761-0012-7
Material
PBT
YES
Retainer (Only for GT11-8DS-HU)
4.4
15.35
2.7
RoHS
YES
Part Number
GT11-8DP-6R
HRS No.
-------
Material
PBT
6
(It is planning)
96
GT11 Series
BoardType
B
Recommended Board Mounting Pattern
24.7
16.8
29.95
22.25
5
2.8
8.4
1.3
14.3
3
2.8
1.3
13.25
B
Fully mated connector assemblies
44
GT11-8DS-2.8C
GT11-8DP-2.8DS(70)
Board
RoHS
YES
Part Number
HRS No.
Item
Housing
Material
PBT
Finish
OuterTerminal Phosphor bronze
Insulator
Terminal
Tin plating
Tin plating
GT11-8DP-2.8DS(70) 761-0021-8-70
PBT
Brass
97
GT11 Series
B
Termination sequence
Strip the Jacket.
Insert the inner terminals into the insulated case.
Inshulated case
Shield
Jacket
ꢀCut the shield and expose
Iꢀnsert what was made in Step into the Outer
the wire.
terminal.
Outer terminal
Wire
Cut back the shield above
the jacket and wrap with
conductive tape.
Iꢀnsert the caulking shield cover onto the Outer
terminal.
Shield cover
Conductive tape
Strip the wire.
Insert what was made in Step into the housing.
Housing
Crimp the internal terminals.
Insert the retainer.
Internal terminal
Retainer
Completion
98
GT11 Series
B
TerminationTools
User's manuals are available. Please ask your Hirose Electric account representative.
Automatic Crimping Machine (for 2-conductor and 8-conductor cable)
Specifications
The photograph shows just
one example.The product is
Item
subject to change.
Specification
Remarks
Capacity
1.5Ton
30mm
Stroke
Number of strokes
Weight
200spm (50Hz)
240spm (60Hz)
75kg
Motor
0.2kW
AC100V
Crimping speed
2000 to 4000 pcs. per hour
Product Number Applicator Product Number (2-conductor type) Applicator Product Number (8-conductor type)
GT11-1822SCF(70) Applicator 105-GT11-1822S-2
GT11-1822PCF(70) Applicator 105-GT11-1822P-2
GT11-2428SCF(70) Applicator 105-GT11-2428S-2
GT11-2428PCF(70) Applicator 105-GT11-2428P-2
Applicator 105-GT11-1822S
Applicator 105-GT11-1822P
Applicator 105-GT11-2428S
Applicator 105-GT11-2428P
Part Number CM-105
Outer terminal Caulking Jig (for 8-conductor cable)
Hand Press
Part Number GT11-8S/P-HP
99
相关型号:
©2020 ICPDF网 联系我们和版权申明