GT5-1P-DS(A) [HRS]
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines; 同轴电缆连接天线,传感器和通信干线型号: | GT5-1P-DS(A) |
厂家: | HRS |
描述: | Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines |
文件: | 总21页 (文件大小:656K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
SAE/USCAR-19
Termination of coaxial cables in automotive, medical and instrumentation applications
utilizes a single motion to crimp the center conductor, shield and outer insulation.
GT5 Series
— Connectors for coaxial cables —
<
Several types and configurations: In-line, board mounted, combinations of
>
coaxial cable with signal/power, Multi-position and color/ keying variations.
Features
USCAR Standard titled "Square Outer Conductor (SAE/USCAR-19)" excludes Water Proof type (GT5W)
Cost efficient termination
TM
Highly efficient and reliable single motion "Twin Crimp " termination allows high volume production with
semi-automatic equipment.
Space-saving Design
Lock-release latching system
Shock / vibration resistant electrical connections
Verification of the full contact insertion
Color and polarizing variations
Excellent High Frequency Performance
Refer to V.S.W.R. data on the following pages.
Applications
In-car communication, car sensors (temperature, pressure), automotive audio systems, GPS antenna systems,
RACS antenna audio/video antenna systems, CRT displays, medical and measuring instrumentation, variety of
communication equipment, office automation equipment, LAN systems.
*"Twin Crimp"is a registered trade mark of Hirose Electric.
27
B Test Data (Using 1.5D-2V Type cable)
High Frequency Characteristics (V.S.W.R.)
Note: Typical data using fully assemblied and connected GT5-1S-HU and the GT5-1PP-HU.
B Termination sequence
1. Strip the cable.
2. Crimp the cable to the terminal.
3. Insert the terminal in the housing until is fully locked.
4. Fully insert the retainer.
28
Terminals for coaxial shielded cable
F Connector Terminals
Inner Insulation
Diameter
Outer
Diameter
Part Number
CL No.
Conductor Size (AWG)
Packaging
755-0065-1
755-0078-3
755-0022-9
755-0002-1
755-0071-4
755-0077-0
755-0054-5
755-0016-6
755-0012-5
755-0034-8
755-0020-3
755-0024-4
755-0036-3
#30 or equivalent
0.6 to 0.9mm 1.4 to 1.8mm 1,300 pcs. per reel
1.5 to 2.0mm 2.3 to 2.7mm 1,300 pcs. per reel
GT5-30/0.7-1.5SCF
GT5-2428/1.6-2.5SCF
GT5-30/1.6-2.9SCF
GT5-2428/1.6-2.9SCF
GT5-2022/1.6-2.9SCF
GT5-2022/F2.7-3.5SCF
GT5-2022/F3.3-3.8SCF
GT5-30/3.3-5SCF
#30 or equivalent
#24 to 28 or equivalent
#24 to 28 or equivalent 1.5 to 2.0mm 2.6 to 3.4mm 1,300 pcs. per reel
#20 to 22 or equivalent
#20 to 22 or equivalent 2.4 to 2.9mm 3.3 to 3.7mm 1,100 pcs. per reel
#20 to 22 or equivalent 2.5 to 2.9mm 3.6 to 4.0mm 1,100 pcs. per reel
#30 or equivalent
*
*
*
*
*
*
*
#24 to 28 or equivalent 2.5 to 2.9mm 4.6 to 5.0mm 1,100 pcs. per reel
#20 to 22 or equivalent
GT5-2428/F3.3-5SCF
GT5-2022/F3.3-5SCF
GT5-30/F4-5SCF
Part
Material
Finish
#30 or equivalent
PBT
Phosphor bronze
Brass
Insulator
Color: Dark gray
Tin plating
#24 to 28 or equivalent 3.0 to 3.6mm 4.6 to 5.0mm 1,100 pcs. per reel
#20 to 22 or equivalent
GT5-2428/F4-5SCF
GT5-2022/F4-5SCF
Crimp terminals
Outer terminals
Tin plating
Note: Products marked with an asterisk (*) indicate polyethylene foam insulation.
M Connector Terminals
Inner Insulation
Diameter
Outer
Part Number
CL No.
Conductor Size (AWG)
Packaging
Diameter
GT5-30/0.7-1.5PCF
GT5-30/1.6-2.9PCF
GT5-2428/1.6-2.9PCF
GT5-2022/1.6-2.9PCF
GT5-2022/F2.7-3.5PCF
GT5-2022/F3.3-3.8PCF
GT5-30/F3.3-5PCF
GT5-2428/F3.3-5PCF
GT5-2022/F3.3-5PCF
GT5-30/F4-5PCF
755-0017-9
755-0021-6
755-0001-9
755-0094-0
755-0076-8
755-0053-2
755-0015-3
755-0011-2
755-0033-5
755-0019-4
755-0023-1
755-0035-0
#30 or equivalent
#30 or equivalent
0.6 to 0.9mm 1.4 to 1.8mm 900 pcs. per reel
#24 to 28 or equivalent 1.5 to 2.0mm 2.6 to 3.4mm 900 pcs. per reel
#20 to 22 or equivalent
#20 to 22 or equivalent 2.4 to 2.9mm 3.3 to 3.7mm 900 pcs. per reel
#20 to 22 or equivalent 2.5 to 2.9mm 3.6 to 4.0mm 900 pcs. per reel
#30 or equivalent
*
*
*
*
*
*
*
#24 to 28 or equivalent 2.5 to 2.9mm 4.6 to 5.0mm 900 pcs. per reel
#20 to 22 or equivalent
Part
Material
Finish
PBT
#30 or equivalent
Insulator
Color: Dark gray
Tin plating
Brass
Brass
GT5-2428/F4-5PCF
GT5-2022/F4-5PCF
#24 to 28 or equivalent 3.0 to 3.6mm 4.6 to 5.0mm 900 pcs. per reel
#20 to 22 or equivalent
Crimp terminals
Outer terminals
Tin plating
Note: Products marked with an asterisk (*) indicate polyethylene foam insulation.
Low-insertion M Connector Terminals
Inner Insulation
Diameter
Outer
Part Number
HRS No.
Conductor Size (AWG)
Packaging
Diameter
Part
Material
Finish
GT5L-30/0.7-1.5PCF
GT5L-30/1.6-2.9PCF
GT5L-2428/1.6-2.9PCF
GT5L-2428/1.6-2.5PCF
755-0068-0
755-0067-7
755-0066-4
755-0079-6
#30 or equivalent
#30 or equivalent
0.6 to 0.9mm 1.4 to 1.8mm
900 pcs. per reel
PBT
Insulator
Color: Dark gray
#24 to 28 or equivalent 1.5 to 2.0mm 2.6 to 3.4mm
#24 to 28 or equivalent
900 pcs. per reel
Brass
Brass
Crimp terminals
Outer terminals
Tin plating
Tin plating
29
B
Keying Configurations
For Single-Conductor coaxial shielded cable
F Connectors
Housing
Figure q
Figure r
Figure u
Figure w Figure e
Figure t Figure y
GT5-1S-HU
Figure i Figure o
Key polarizing Corresponding M Connector Corresponding M Connector USCAR-19
B
Shown with inserted retainer.
Part Number
GT5-1S-HU
CL No.
Material
Color
code
Housing- In-line
Assembly- Board Mounting
Coding
755-0004-7
755-0037-6
755-0038-9
755-0080-5
755-0081-8
755-0082-0
Note 1
Light gray
Brown
GT5-1PP-HU
GT5-1P-DS
Figure q
Figure w
Figure e
Figure r
Figure t
Figure y
Figure u
Figure i
Figure o
GT5-1S-HU(A)
GT5-1S-HU(B)
GT5-1S-HU(C)
GT5-1S-HU(D)
GT5-1S-HU(E)
GT5-1S-HU(I)
GT5-1S-HU(J)
GT5-1S-HU(K)
GT5-1PP-HU(A)
GT5-1PP-HU(B)
GT5-1PP-HU(C)
GT5-1PP-HU(D)
GT5-1PP-HU(E)
GT5-1PP-HU(I)
GT5-1PP-HU(J)
GT5-1PP-HU(K)
GT5-1P-DS(A)
GT5-1P-DS(B)
GT5-1P-DS(C)
GT5-1P-DS(D)
GT5-1P-DS(E)
GT5-1P-DS(I)
GT5-1P-DS(J)
GT5-1P-DS(K)
A
B
C
D
E
I
Green
Blue
PBT
Purple
Pink
Black
Note 1
Cream white
Pastel orange
J
K
Retainer
Note 1
Terminal extraction tool: GT-PO(A), Note 1: concept only
Retainer (-Optional-Used with the housings: GT5-1S-HU, GT5-1PP-
HU, GT5N-1PP-HU, GT5H-1PP-HU, and GT5-1PB-HU)
Part Number
GT5-1P/S-R
CL No.
Material
PBT
Color
755-0006-2
Dark gray
Housing (Not requiring use of the retainer)
GT5R-1S/HU
Part Number
GT5R-1S-HU
CL No.
Material
PBT
Color
755-0047-0
Light gray
Terminal extraction tool: GT-PO(A)
30
B
Keying Configurations
M Connectors
Housing
Figure q
Figure w
Figure e
Figure y
Figure o
Mounting bracket
attachment side
Figure r
Figure u
Figure t
Figure i
Outside ground connection
BShown with inserted retainer.
Corresponding F Connector
Housing
Key polarizing USCAR-19
Part Number
GT5-1PP-HU
CL No.
Color
code
Coding
755-0005-0
755-0039-1
755-0040-0
755-0103-9
755-0104-1
755-0105-4
Note 1
GT5-1S-HU
Light Gray
Brown
Figure q
Figure w
Figure e
Figure r
Figure t
Figure y
Figure u
Figure i
Figure o
GT5-1PP-HU(A)
GT5-1PP-HU(B)
GT5-1PP-HU(C)
GT5-1PP-HU(D)
GT5-1PP-HU(E)
GT5-1PP-HU(I)
GT5-1PP-HU(J)
GT5-1PP-HU(K)
GT5-1S-HU(A)
GT5-1S-HU(B)
GT5-1S-HU(C)
GT5-1S-HU(D)
GT5-1S-HU(E)
GT5-1S-HU(I)
GT5-1S-HU(J)
GT5-1S-HU(K)
A
B
C
D
E
I
Green
Blue
Purple
Pink
Black
Retainer
Note 1
Cream white
Pastel orange
J
K
Note 1
* Refer to pages 32 and 34 for panel brackets used with in-line connectors.
* Terminal extraction tool: GT-PO(A)
Note 1: concept only
Part
Material
PBT
Finish
Housing
Color: Dark gray
Tin plating
Ground terminal
Phosphor bronze
Housing (For use with H type mounting
bracket)
BFully mated connector assemblies.
Corresponding F Connector
Part Number
CL No.
Color
Housing
GT5H-1PP-HU(10)
GT5H-1PP-HU(41)
755-0093-7 10
755-0093-7 41
Light Gray
Blue
GT5-1S-HU
GT5R-1S-HU
BFully mated connector assemblies.
Housing (For use with N type mounting
bracket)
Corresponding F Connector
Housing
Part Number
CL No.
Color
GT5-1S-HU
GT5N-1PP-HU
755-0090-9
Light Gray
GT5R-1S-HU
31
Housings
Panel mounting, enhanced
[
]
shielding configuration
BRecommended Panel Cut-out
BMounted and fully mated connector
assemblies
M 3
Panel
thickness:1.6
Part Number
GT5A-1PP-HU
CL No.
Part
Material
Finish
Housing
PBT
Color: Light gray
Tin plating
755-0025-7
Ground terminal
Brass
Note 1: Terminal extraction tool: GT-PO(A)
Note 2: Retainer is optional.
Note 3: Use mounting screws of M3 with nominal diameter 3L-6 (for a panel thickness of 1.6 mm).
BRecommended Panel Cut-out
BMounted and fully mated
connectorassemblies
Part Number
GT5P-1PP-HU
CL No.
Part
Material
Finish
Housing
PBT
Color: Light gray
Tin plating
755-0030-7
Ground terminal
Brass
Note 1: Terminal extraction tool: GT-PO(A)
Note 2: Retainer is optional.
Note 3: Use mounting screws of M3 with nominal diameter 3L-6 (for a panel thickness
Panel
thickness:1.6
1
of 1.6 mm).
32
BRecommended Panel Cut-out
BMounted and fully mated connector
assemblies
Chassis
Assembly Diagram (1:1)
Part Number
GT5B-1PP-HU
CL No.
Part
Material
Finish
Housing
PBT
Color: Light gray
Tin plating
755-0051-7
Ground terminal
Copper alloy
Note 1: Terminal extraction tool: GT-PO(A) with nominal diameter 3L-6 (for a board
thickness of 1.6 mm).
Note 2: Retainer is optional.
Note 3: Use mounting screws of M3 with nominal diameter 3L-6 (for a panel thickness
of 1.6 mm).
BRecommended Panel Cut-out
BMounted and fully mated connector
assemblies
Chassis
Assembly Diagram (1:1)
Part Number
GT5S-1PP-HU
CL No.
Part
Material
Finish
Housing
PBT
Color: Light gray
Tin plating
755-0050-4
Ground terminal
Copper alloy
Note 1: Terminal extraction tool: GT-PO(A) with nominal diameter 3L-6 (for a board
thickness of 1.6 mm).
Note 2: Retainer is optional.
Note 3: Use mounting screws of M3 with nominal diameter 3L-6 (for a panel thickness
33
of 1.6 mm).
Connector assembly, Printed
Circuit Board Mounting Type
Figure q
Figure w
Figure e
Figure t
Figure i
Figure r
Figure u
Figure y
Figure o
BDiagram of Mated Connector in Use
BRecommended PCB Mounting Pattern
For outer conductor
For inner conductor
Key polarizing
code
Corresponding F Connector
Part Number
GT5-1P-DS
CL No.
Color
M Connector-Board Type
Housing
755-0007-5
755-0041-3
755-0042-6
755-0083-3
755-0084-6
755-0085-9
Note 2
Light Gray
Brown
GT5-1P-DS
GT5-1S-HU
Figure q
Figure w
Figure e
Figure r
Figure t
Figure y
Figure u
Figure i
Figure o
GT5-1P-DS(A)
GT5-1P-DS(B)
GT5-1P-DS(C)
GT5-1P-DS(D)
GT5-1P-DS(E)
GT5-1P-DS(I)
GT5-1P-DS(J)
GT5-1P-DS(K)
GT5-1P-DS(A)
GT5-1P-DS(B)
GT5-1P-DS(C)
GT5-1P-DS(D)
GT5-1P-DS(E)
GT5-1P-DS(I)
GT5-1P-DS(J)
GT5-1P-DS(K)
GT5-1S-HU(A)
GT5-1S-HU(B)
GT5-1S-HU(C)
GT5-1S-HU(D)
GT5-1S-HU(E)
GT5-1S-HU(I)
GT5-1S-HU(J)
GT5-1S-HU(K)
Outlines
Green
Blue
Part
Material
Finish
Purple
Pink
Housing
0.65 x 1.1 Terminals
Insulator
PBT
Brass
-
Black
Tin plating
Dark gray
Tin plating
Note 2
Cream white
Pastel orange
PBT
Note 2
Outer terminals
Phosphor bronze
Note1: Use mounting screws of M3 with nominal diameter 3L-6 (for a board thickness of 1.6 mm).
Note2: concept only
34
Two-position type-Each Single-Conductor coaxial cable
F Connectors
BKeying Configurations
Housing
Figure q
Figure w
Figure e
Figure r
Key polarizing USCAR-19
Part Number
GT5-2S-HU
CL No.
Material
PBT
Color
code
Coding
755-0044-1
755-0059-9
755-0060-8
755-0097-8
Light Gray
Brown
Green
D2
Figure q
Figure w
Figure e
Figure r
GT5-2S-HU(A)
GT5-2S-HU(B)
GT5-2S-HU(C)
A2
B2
C2
Shown with inserted retainer.
Blue
Note 1: Terminal extraction tool: GT-PO(A)
Note 2: Used with separate retainer (GT-5-2P/S-R).
M Connectors
BRecommended Mounting Bracket dimensions.
Housing[Panel Mounted Housing]
Tin plating
BFully mated connector assemblies
BKeying Configurations
Key polarizing
Part Number
GT5-2PP-HU
CL No.
Color
Figure q
Figure w
Figure e
Figure r
code
755-0045-4
755-0063-6
755-0064-9
Light Gray
Brown
Green
Figure q
Figure w
Figure e
Figure r
Part
Material
Finish
GT5-2PP-HU(A)
GT5-2PP-HU(B)
GT5-2PP-HU(C)
Housing
PBT
-
Blue
Ground terminal
Phosphor bronze
Tin plating
Note: Used with separate retainer (GT-5-2P/S-R).
Coding D2 at USCAR-19 is GT5-2PP-HU.
35
Housing
BDiagram of Mated Connector in Use
Part Number
GT5N-2PP-HU
CL No.
Material
PBT
Color
755-0055-8
Light gray
Note 1:Terminal extraction tool: GT-PO(A)
Note 2: Used with separate retainer (GT-5-2P/S-R).
Retainer – 2 position (Used with GT5-2S-HU, GT5-2PP-HU,
and GT5N-2PP-HU)
Part Number
GT5-2P/S-R
CL No.
Material
PBT
Color
755-0046-7
Dark gray
BKeying Configurations
Housing
Figure q
Figure w
Figure e
Figure r
BRecommended Board Mounting
BMounted and fully mated
connector assemblies
Pattern
Panel
For inner conductor
For outer conductor
Board Thickness : 1.6mm
Key polarizing USCAR-19
Part Number
GT5-2P-DS
CL No.
Material
PBT
Color
code
Coding
755-0043-9
755-0061-0
755-0062-3
Light Gray
Brown
Green
D2
Figure q
Figure w
Figure e
Figure r
GT5-2P-DS(A)
GT5-2P-DS(B)
GT5-2P-DS(C)
A2
B2
C2
Blue
GT5-2P-DS (D)
GT5-2P-DS (A) GT5-2P-DS (B)
Recommended Panel Cut-out
GT5-2P-DS (C)
Note: Use mounting screws of M3 with nominal diameter 3L-6 (for a
board thickness of 1.6 mm).
Coding D2 at USCAR-19 is GT5-2P-DS.
36
( For use with combination type assemblies:
GT5-2/1S-HU, GT5-2/1P-DS, GT5-2/1PP-HU, GT5N-2/1PP-HU)
Power Supply Terminals
F Connector Terminals
Outer
Diameter
Part Number
CL No.
Material
Finish
Conductor Size (AWG)
Packaging
GT7-2022SCF
757-0001-1
757-0003-7
#20 to 22
#20 to 22
1.4 to 2.4mm
5,000
3,000
Copper alloy
Tin plating
GT7A-2022SCF
2.6 to 3.1mm
Note 1: Sold by the reel. (See above table for number of Packaging.)
Note 2: This component is used only with applicable HRS housings.
M Connector Terminals
Outer
Part Number
CL No.
Material
Brass
Finish
Packaging
Diameter
GT7-2022PCF
757-0002-4
757-0004-0
1.4 to 2.4mm
2.6 to 3.1mm
5,000
3,000
Tin plating
GT7A-2022PCF
Note 1: Sold by the reel. (See above table for number of Packaging.)
Note 2: This component is used only with applicable HRS housings.
37
Combinaton Type (Two Single-Conductor Coaxial Cables + One Power contact)
F Connectors
BShown with inserted retainer.
Housing
Retainer
Part Number
GT5-2/1S-HU
CL No.
Material
PBT
Color
755-0009-0
Light gray
Note 1:Terminal extraction tool: GT-PO(A)
Note 2: Used with separate retainer (GT5-2/1S-R).
Retainer (exclusively for GT5-2/1S-HU)
Part Number
GT5-2/1S-R
CL No.
Material
PBT
Color
755-0003-4
Dark gray
B
Recommended Board Mounting Pattern
M Connectors
Connector assembly, Printed
Circuit Board mounting
For power supply
For inner conductor
For outside conductor
Thickness :
1.6mm
BRecommended Panel Cut-out
Part
Material
Finish
Housing
PBT
Brass
Color: Light gray
Tin plating
Dark gray
0. 64x1.1 Terminal
Insulator
PBT
Part Number
GT5-2/1P-DS
CL No.
Outer terminal
Phosphor bronze
Brass
Tin plating
Tin plating
Board
755-0014-0
Tub terminal for DS 070
Note: Use mounting screws of M3 with nominal diameter 3L-6 (for a board thickness of 1.6 mm).
38
M Connectors
BShown with inserted retainer.
Housing - with External Ground
Retainer
Mounting bracket
attachment side
B
Recommended Mounting Bracket Dimensions
min.
Outside ground connection
Tin plating finish
Part Number
CL No.
Part
Material
Finish
Housing
PBT
Color: Light gray
Tin plating
GT5-2/1PP-HU
755-0008-8
Ground terminal
Phosphor bronze
Note 1: Terminal extraction tool: GT-PO(A)
Note 2: Used with separate retainer (GT5-2/1PP-R ).
Housing - without External Ground
Part Number
CL No.
Material
PBT
Color
GT5N-2/1PP-HU
755-0013-8
Light gray
Note 1: Terminal extraction tool: GT-PO(A)
Note 2: Used with separate retainer GT5-2/1PP-R and mounting bracket GT-BK or GT-BK (01).
Retainer (Used with GT5N-2/1PP-HU and GT5-2/1PP-HU)
GT5-2/1PP-R
Part Number
GT5-2/1PP-R
CL No.
Material
PBT
Color
755-0010-0
Dark gray
39
4-Position – Single conductor Coaxial cable
F Connectors
BShown with inserted retainer.
USCAR-19
Part Number
GT5-4S-HU
CL No.
Material
PBT
Color
Coding
755-0056-0
Light gray
D4
Note: Used with separate retainer (GT-5-4P/S-R).
M Connectors
USCAR-19
Coding
Part Number
CL No.
Material
PBT
Color
GT5N-4PP-HU
755-0057-3
Light gray
D4
Note 1: The product should be used with a low-force insertion/withdrawal M connector
terminal.
Note 2: Used with separate retainer GT-5-4P/S-R.
Retainer (Used with GT5-4S-HU and GT5N-4PP-HU)
Part Number
GT5-4P/S-R
CL No.
Material
PBT
Color
755-0058-6
Dark gray
40
M Connectors
Connector assembly, Printed Circuit
Board Mounting
USCAR-19
Part Number
GT5-4P-DS
CL No.
Coding
755-0087-4
D4
B Recommended Board Mounting Pattern
B Recommended Panel Cut-out
For inner conductors
For outer conductors
Panel Outline
PCB Board Outline
B Recommended Board and Panel installation
M3 Screw
Board
Panel
41
Single Conductor Coaxial Cable - Waterproof Type
F Connectors
Housing
Part Number
GT5W-1S-HU
CL No.
Color
Material
PBT
755-0027-2
Light gray
Note: Specific retainer is determined by the type of the cable used.
Retainer (Used with GT5W-1P-HU, GT5JW-1PP-HU,
GT5W-1S-HU and GT5W-1P-HU)
Part Number
GT5W-1P/S-R
CL No.
Color
Material
PBT
Dark gray
Dark gray
755-0028-5
Silicon rubber Compound
Note: Outer diameter of the cable must be within 2.9 to 3.4 mm. Consult nearest HRS
representative for other diameters.
42
M Connectors
Housing
Part Number
GT5W-1P-HU
CL No.
Part
Material
Color
Housing
PBT
Light gray
White
755-0026-0
Connector seal
Silicon rubber
Note: Use correct retainer.
Housing - Bracket Mounting
BMounted and fully mated connector assemblies
BRecommended Bracket Dimensions
Part Number
CL No.
A
B
Part
Material
PBT
Color
GT5W-1PP-HU
GT5JW-1PP-HU
755-0070-1
755-0069-2
1.5
3.2
1.3
3.0
Housing
Light gray
White
Connector seal
Silicon rubber Compound
43
BCompleted Termination cross section
G Terminals
For Direct Coaxial Cable Termination
1.5D-2V or equivalent
BBoard Termination Pattern
Lands
Part Number
GTA-1.6CF
CL No.
Material
Brass
Finish
Packaging
755-0032-2
Tin plating
1,500 pcs. Per reel
BCompleted Termination cross section
1.5D-2V or equivalent
Pre-solder
Heat-shrink tubing
B
Board Termination Pattern
Part Number
GTB-1.6CF
CL No.
Material
Brass
Finish
Packaging
755-0049-5
Tin plating
1,500 pcs. Per reel
BCompleted Termination cross section
1.5D-2V or equivalent
Heat-shrink tubing
B
Board Termination Pattern
Lands
Part Number
G-1.6PCF
CL No.
Material
Brass
Finish
Packaging
755-0029-8
Tin plating
1,500 pcs. Per reel
44
For Direct Coaxial Cable Termination
BRecommended Board
Termination Pattern
BCompleted Termination Cross Section
Lands
Pre-solder
Part Number
GTA-0.7CF
CL No.
Material
Brass
Finish
Packaging
1,500 pcs. Per reel
755-0074-2
Tin plating
BRecommended Board
Termination Pattern
BRecommended Completed Termination cross
section
Lands
Part Number
GTB-0.7CF
CL No.
Material
Brass
Finish
Packaging
755-0075-5
Tin plating
1,500 pcs. Per reel
For Mid-Cable Termination
Raised point of contact
BAttachment Diagram
BRecommended Panel Cut-out
Panel
For use with coaxial cables 2.9
to 3.4 mm. outside diameter.
Part Number
GT-1.6PG-C
CL No.
Material
Brass
Finish
Packaging
1
Setscrew (M2.5)
755-0031-0
Tin plating
45
Bottom Shield cover
For Improved Electronic Noise Compatibility
Mounted Condition Installed
Part Number
CL No.
Material
Brass
Finish
Tin plating
GT5-1P/S-CSB
755-0048-2
Top Shield covers
Mounted Condition Installed
Part Number
GT5C-1P-CSB
CL No.
755-0088-7
46
Panel Mounting In-line Bracket
GT-BK
GT-BK (01)
Part Number
CL No.
Material
SPCC
Finish
Used with connectors
GT-BK
751-0039-6
Tin plating
GT5-1PP-HU(A),GT5-1PP-HU(B),GT5-1PP-
HU(C),GT5-1PP-HU(D),GT5-1PP-HU(E),GT5-1PP-
HU(F),GT5-1PP-HU(G),GT5-1PP-HU(H),GT5-
2/1PP-HU,GT5-2/1PP-HU(A),GT5-2/1PP-HU(A)
GT-BK(01)
751-0039-6-01
Zinc plating
B Termination Tools
User's manuals are available. Please ask your Hirose Electric account representative.
Automatic crimping machine
Specifications
Item
Specification
Stroke length
Number of strokes
Weight
Specification
1.5tons
Remarks
30mm
200spm(50Hz)
75kg
200spm(60Hz)
AC100V
Motor
0.2kW
Crimping speed
2000 to 4000pcs. Per day
Part Number CM-105
* Crimp height setting tables are available for each cable type. Please contact your
nearest Hirose Electric account representative.
Different cables will require different crimp height settings.
47
相关型号:
©2020 ICPDF网 联系我们和版权申明