GT5-30/F3.3-5SCF(70) [HRS]
Wire Terminal, ROHS COMPLIANT;型号: | GT5-30/F3.3-5SCF(70) |
厂家: | HRS |
描述: | Wire Terminal, ROHS COMPLIANT |
文件: | 总22页 (文件大小:1681K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
SAE/USCAR-19
Termination of coaxial cables in automotive, medical and instrumentation applications
utilizes a single motion to crimp the center conductor, shield and outer insulation.
GT5 Series
— Connectors for coaxial shielded cables —
<
Several types and configurations: In-line, board mounted, combinations of
>
coaxial cable with signal/power, Multi-position and color/ keying variations.
Features
USCAR Standard titled "Square Outer Conductor (SAE/USCAR-19)" excludes Water Proof type (GT5W)
Cost efficient termination
TM
Highly efficient and reliable single motion "Twin Crimp " termination allows high volume production
with semi-automatic equipment.
Space-saving Design
Lock-release latching system
Shock / vibration resistant electrical connections
Verification of the full contact insertion
Color and polarizing variations
Excellent High Frequency Performance
Refer to V.S.W.R. data on the following pages.
Applications
In-car communication, car sensors (temperature, pressure), automotive audio systems, GPS antenna systems,
RACS antenna audio/video antenna systems, CRT displays, medical and measuring instrumentation, variety of
communication equipment, office automation equipment, LAN systems.
*"Twin Crimp" is a registered trade mark of Hirose Electric.
7
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5 Series
B Test Data (Using 1.5D-2V Type cable)
High Frequency Characteristics (V.S.W.R.)
3.0
2.8
2.6
2.4
2.2
2.0
1.8
1.6
1.4
1.2
1
2.0
3.0GH
Z
1.0
Note: Typical data using fully assemblied and connected GT5-1S-HU and the GT5-1PP-HU.
B Termination sequence
1. Strip the cable.
2. Crimp the cable to the terminal.
3.5
5
9.5
3. Insert the terminal in the housing until is fully locked.
4. Fully insert the retainer.
8
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5 Series
Terminals for coaxial shielded cable
21.7
F Connector Terminals
Part Number
CL No.
Conductor Size (AWG)
Packaging
0.6 to 0.9mm 1.4 to 1.8mm 1,300 pcs. per reel
Inner Insulation Diameter Outer Diameter
RoHS
755-0065-1-70 #30 or equivalent
GT5-30/0.7-1.5SCF(70)
GT5-2428/1.1-2.2SCF
755-0123-6-70 #24 to 28 or equivalent 1.0 to 1.4mm 2.0 to 2.4mm 1,300 pcs. per reel
755-0078-3-70 #24 to 28 or equivalent 1.5 to 2.0mm 2.3 to 2.7mm 1,300 pcs. per reel
755-0022-9-70 #30 or equivalent
GT5-2428/1.6-2.5SCF(70)
GT5-30/1.6-2.9SCF(70)
GT5-2428/1.6-2.9SCF(70)
GT5-2022/1.6-2.9SCF(70)
GT5-2022/F2.7-3.5SCF(70)
GT5-2022/F3.3-3.8SCF(70)
GT5-30/F3.3-5SCF(70)
GT5-2428/F3.3-5SCF(70)
GT5-2022/F3.3-5SCF(70)
GT5-30/F4-5SCF(70)
755-0002-1-70 #24 to 28 or equivalent 1.5 to 2.0mm 2.6 to 3.4mm 1,300 pcs. per reel
755-0071-4-70 #20 to 22 or equivalent
755-0077-0-70 #20 to 22 or equivalent 2.0 to 2.5mm 3.3 to 3.7mm 1,100 pcs. per reel
755-0054-5-70 #20 to 22 or equivalent 2.5 to 2.9mm 3.6 to 4.0mm 1,100 pcs. per reel
755-0016-6-70 #30 or equivalent
YES
*
*
*
*
*
*
*
755-0012-5-70 #24 to 28 or equivalent 2.5 to 2.9mm 4.6 to 5.0mm 1,100 pcs. per reel
755-0034-8-70 #20 to 22 or equivalent
Part
Material
Finish
PBT
Phosphor bronze
Brass
Insulator
Color: Dark gray
Tin plating
755-0020-3-70 #30 or equivalent
Crimp terminals
Outer terminals
1,100 pcs. per reel
755-0024-4-70 #24 to 28 or equivalent 3.0 to 3.6mm 4.6 to 5.0mm
755-0036-3-70 #20 to 22 or equivalent
GT5-2428/F4-5SCF(70)
GT5-2022/F4-5SCF(70)
Tin plating
Note: Products marked with an asterisk (*) indicate polyethylene foam insulation.
M Connector Terminals
23.05
Inner Insulation
Diameter
Outer
Diameter
Part Number
CL No.
Conductor Size (AWG)
Packaging
RoHS
GT5-30/0.7-1.5PCF(70) 755-0017-9-70 #30 or equivalent
GT5-30/1.6-2.9PCF(70) 755-0021-6-70 #30 or equivalent
0.6 to 0.9mm 1.4 to 1.8mm 900 pcs. per reel
GT5-2428/1.6-2.9PCF(70) 755-0001-9-70 #24 to 28 or equivalent 1.5 to 2.0mm 2.6 to 3.4mm 900 pcs. per reel
GT5-2022/1.6-2.9PCF(70) 755-0094-0-70 #20 to 22 or equivalent
GT5-2022/F2.7-3.5PCF(70) 755-0076-8-70 #20 to 22 or equivalent 2.0 to 2.5mm 3.3 to 3.7mm 900 pcs. per reel
GT5-2022/F3.3-3.8PCF(70) 755-0053-2-70 #20 to 22 or equivalent 2.5 to 2.9mm 3.6 to 4.0mm 900 pcs. per reel
*
*
*
*
*
*
*
YES
GT5-30/F3.3-5PCF(70)
755-0015-3-70 #30 or equivalent
GT5-2428/F3.3-5PCF(70) 755-0011-2-70 #24 to 28 or equivalent 2.5 to 2.9mm 4.6 to 5.0mm 900 pcs. per reel
GT5-2022/F3.3-5PCF(70) 755-0033-5-70 #20 to 22 or equivalent
Part
Material
Finish
PBT
GT5-30/F4-5PCF(70)
755-0019-4-70 #30 or equivalent
Insulator
Color: Dark gray
Tin plating
Brass
Brass
GT5-2428/F4-5PCF(70) 755-0023-1-70 #24 to 28 or equivalent 3.0 to 3.6mm 4.6 to 5.0mm 900 pcs. per reel
GT5-2022/F4-5PCF(70) 755-0035-0-70 #20 to 22 or equivalent
Crimp terminals
Outer terminals
Tin plating
Note: Products marked with an asterisk (*) indicate polyethylene foam insulation.
23.05
Low-insertion M Connector Terminals
Inner Insulation
Diameter
Outer
Part Number
HRS No.
Conductor Size (AWG)
Packaging
RoHS
YES
Diameter
Part
Material
Finish
GT5L-30/0.7-1.5PCF(70) 755-0068-0-70 #30 or equivalent
GT5L-30/1.6-2.9PCF(70) 755-0067-7-70 #30 or equivalent
0.6 to 0.9mm 1.4 to 1.8mm
2.6 to 3.4mm
900 pcs. per reel
PBT
Insulator
Color: Dark gray
Tin plating
GT5L-2428/1.6-2.9PCF(70) 755-0066-4-70 #24 to 28 or equivalent 1.5 to 2.0mm 2.6 to 3.4mm
GT5L-2428/1.6-2.5PCF(70) 755-0079-6-70 #24 to 28 or equivalent 2.3 to 2.7mm
Brass
Brass
900 pcs. per reel
Crimp terminals
Outer terminals
Tin plating
9
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5 Series
B
Keying Configurations
For Single-Conductor coaxial shielded cable
F Connectors
Housings
Figure q
Figure r
Figure u
Figure w Figure e
Figure t Figure y
Figure i Figure o
25
GT5-1S-HU
Key polarizing Corresponding M Connector Corresponding M Connector USCAR-19
B
Shown with inserted retainer.
Part Number
CL No.
Material
Color
RoHS
code
Housing- In-line
Assembly- Board Mounting
Coding
GT5-1S-HU
755-0004-7
755-0037-6
755-0038-9
755-0080-5
755-0081-8
755-0082-0
Light gray
Brown
GT5-1PP-HU(70)
GT5-1P-DS(70)
Figure q
Figure w
Figure e
Figure r
Figure t
Figure y
Figure u
Figure i
Figure o
(26.35)
GT5-1S-HU(A)
GT5-1S-HU(B)
GT5-1S-HU(C)
GT5-1S-HU(D)
GT5-1S-HU(E)
GT5-1S-HU(I)
GT5-1S-HU(J)
GT5-1S-HU(K)
GT5-1PP-HU(A)(70)
GT5-1PP-HU(B)(70)
GT5-1PP-HU(C)(70)
GT5-1PP-HU(D)(70)
GT5-1PP-HU(E)(70)
GT5-1PP-HU(I)
GT5-1P-DS(A)(70)
GT5-1P-DS(B)(70)
GT5-1P-DS(C)(70)
GT5-1P-DS(D)(70)
GT5-1P-DS(E)(70)
GT5-1P-DS(I)
A
B
C
D
E
I
Green
Blue
PBT
Purple
YES
Pink
Black
Cream white
Pastel orange
GT5-1PP-HU(J)
GT5-1P-DS(J)
J
K
Retainer
GT5-1PP-HU(K)
GT5-1P-DS(K)
Retainer (-Optional-Used with the housings: GT5-1S-HU,
GT5-1PP-HU, GT5N-1PP-HU, GT5H-1PP-HU)
14.8
Part Number
GT5-1P/S-R
CL No.
Material
PBT
Color
RoHS
YES
755-0006-2
Dark gray
Housing (Not requiring use of the retainer)
25
GT5R-1S/HU
Part Number
GT5R-1S-HU
CL No.
Material
PBT
Color
RoHS
YES
755-0047-0
Light gray
10
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5 Series
B
Keying Configurations
M Connectors
Housings
30
Figure q
Figure w
Figure e
Figure y
Figure o
Mounting bracket
attachment side
Figure r
Figure u
Figure t
Figure i
Outside ground connection
Corresponding F Connector
Housing
Key polarizing
code
USCAR-19
Coding
Part Number
CL No.
Color
B
Shown with inserted retainer.
RoHS
YES
GT5-1PP-HU(70)
755-0005-0-70
755-0039-1-70
755-0040-0-70
755-0103-9-70
755-0104-1-70
755-0105-4-70
GT5-1S-HU
Light Gray
Brown
Figure q
Figure w
Figure e
Figure r
Figure t
Figure y
Figure u
Figure i
Figure o
(31.35)
GT5-1PP-HU(A)(70)
GT5-1PP-HU(B)(70)
GT5-1PP-HU(C)(70)
GT5-1PP-HU(D)(70)
GT5-1PP-HU(E)(70)
GT5-1PP-HU(I)(70)
GT5-1PP-HU(J)(70)
GT5-1PP-HU(K)(70)
GT5-1S-HU(A)
GT5-1S-HU(B)
GT5-1S-HU(C)
GT5-1S-HU(D)
GT5-1S-HU(E)
GT5-1S-HU(I)
GT5-1S-HU(J)
GT5-1S-HU(K)
A
B
C
D
E
I
Green
Blue
Purple
Pink
Black
Cream white
Pastel orange
J
K
Retainer(GT5-1P/S-R)
Note : Refer to pages 27 for panel mounting in-line bracket.
Part
Material
PBT
Finish
____
Housing
Ground terminal
Phosphor bronze
Tin plating
Housings (For use with H type
mounting bracket)
BFully mated connector assemblies.
14.3
30
25
11.8
(41.4)
(11.4)
GT5-1S-HU
GT5H-1PP-HU
GT5-1P/S-R
(1.35)
GT5-1P/S-R
(1.35)
20.25
Retainer(GT5-1P/S-R)
Corresponding F Connector
Housing
Material
PBT
Part Number
CL No.
Color
RoHS
YES
GT5-1S-HU
GT5H-1PP-HU(10)
755-0093-7 10
Light Gray
GT5R-1S-HU
BFully mated connector assemblies.
Housing (For use with N type mounting
bracket)
(41.4)
30
25
30
(11.4)
GT5-1S-HU
GT5-1P/S-R
12.2
GT5N-1PP-HU
GT5-1P/S-R
17
6.8
9.2
(1.35)
(1.35)
Retainer(GT5-1P/S-R)
Corresponding F Connector
Housing
Material
PBT
Part Number
CL No.
Color
RoHS
YES
GT5-1S-HU
GT5N-1PP-HU
755-0090-9
Light Gray
GT5R-1S-HU
11
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5 Series
Housings
Panel mounting, enhanced
shielding type
[
]
BRecommended Panel Cut-out
19
15
10.4
19
30
BMounted and fully mated connector
assemblies
30
GT5-1S-HU
15
Panel
thickness:1.6
M3
GT5-1P/S-R
Part Number
CL No.
Part
Material
Finish
Corresponding F Connector Housing RoHS
Housing
PBT
Color: Light gray
Tin plating
GT5A-1PP-HU(70)
755-0025-7-70
GT5-1S-HU, GT5R-1S-HU
YES
Ground terminal
Brass
Note 1: Retainer is unnecessary.
Note 2: Use JIS B 1111 and 1101 M3 screws for the mounting screws.
4
15
30
9.5
Part Number
CL No.
Part
Material
Finish
Corresponding F Connector Housing RoHS
Housing
PBT
Color: Light gray
Tin plating
GT5P-1PP-HU(70)
755-0030-7-70
GT5-1S-HU, GT5R-1S-HU
YES
Ground terminal
Brass
Note 1: Retainer is unnecessary.
Note 2: Use JIS B 1111 and 1101 M3 screws for the mounting screws.
12
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5 Series
30
3.2
BMounted and fully mated connector
assemblies
27.4
12.3
GT5-1S-HU
GT5-1P/S-R
1
2.6
Chassis
1.2
Assembly Diagram(1:1)
5
1.2
Part Number
CL No.
Part
Material
Finish
Corresponding F Connector Housing RoHS
Housing
PBT
Color: Light gray
Tin plating
GT5B-1PP-HU(70)
755-0051-7-70
GT5-1S-HU, GT5R-1S-HU
YES
Ground terminal
Copper alloy
Note 1: Retainer is unnecessary.
Note 2: Use JIS B 1115 and 1122 class 4, nominal diameter 3, length 6 screws for the mounting screws.
30
BMounted and fully mated connector
assemblies
27.4
12.3
GT5-1S-HU
GT5-1P/S-R
Chassis
3.6
2.6
Assembly Diagram (1:1)
4
3.2
Part Number
CL No.
Part
Material
Finish
Corresponding F Connector Housing RoHS
Housing
PBT
Color: Light gray
Tin plating
GT5S-1PP-HU(70)
755-0050-4-70
GT5-1S-HU, GT5R-1S-HU
YES
Ground terminal
Copper alloy
Note 1: Retainer is unnecessary.
Note 2: Use JIS B 1115 and 1122 class 4, nominal diameter 3, length 6 screws for the mounting screws.
13
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5 Series
21.3
12.8
12.8
Connector assembly, Printed
Circuit Board Mounting Type
11.8
Figure q
Figure w
Figure e
Figure t
Figure i
Figure r
12.8
Figure y
Figure o
BFully Mated connector assemblies
21.3
GT5-1P-DS(70)
GT5-1
Figure u
BRecommended PCB Mounting Pattern
GT5-1P/S-R
Note
Key polarizing
code
Corresponding F Connector
Part Number
CL No.
Color
M Connector-Board Type
RoHS
YES
Housing
GT5-1P-DS(70)
755-0007-5-70
Light Gray
Brown
GT5-1P-DS
GT5-1S-HU
Figure q
Figure w
Figure e
Figure r
Figure t
Figure y
Figure u
Figure i
Figure o
Panel
GT5-1P-DS(A)(70) 755-0041-3-70
GT5-1P-DS(B)(70) 755-0042-6-70
GT5-1P-DS(C)(70) 755-0083-3-70
GT5-1P-DS(D)(70) 755-0084-6-70
GT5-1P-DS(E)(70) 755-0085-9-70
GT5-1P-DS(I)(70)
GT5-1P-DS(A)
GT5-1P-DS(B)
GT5-1P-DS(C)
GT5-1P-DS(D)
GT5-1P-DS(E)
GT5-1P-DS(I)
GT5-1P-DS(J)
GT5-1P-DS(K)
GT5-1S-HU(A)
GT5-1S-HU(B)
GT5-1S-HU(C)
GT5-1S-HU(D)
GT5-1S-HU(E)
GT5-1S-HU(I)
GT5-1S-HU(J)
GT5-1S-HU(K)
Green
Blue
Part
Material
Finish
Purple
Pink
Housing
0.64 x 1.1 Terminals
Insulator
PBT
Brass
-
Black
Tin plating
Dark gray
Tin plating
GT5-1P-DS(J)(70)
Cream white
Pastel orange
PBT
GT5-1P-DS(K)(70)
Outer terminals
Phosphor bronze
Note: Use JIS B 1115 and 1122 class 4, nominal diameter 3, length 6 screws (for a board
thickness of 1.6 mm) for the mounting screws.
* Eight types of keys are available.
Please use a mating F connector housing of a matching key type.
BFully Mated connector assemblies
GT5E-1P-DS(70)
BRecommended PCB Mounting Pattern
Corresponding F
Part Number
CL No.
Material
Finish
Part
RoHS
YES
Connector Housing
Housing
0.64 x 1.1 Terminals
Insulator
Natural
PA
Brass
Tin plating
Dark gray
Tin plating
Tin plating
GT5-1S-HU
GT5E-1P-DS(70)
755-0092-4-70
PBT
Outer terminals
Lock pin
Phosphor bronze
Brass
GT5R-1S-HU
14
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5 Series
Two-position type-Each Single-Conductor coaxial shielded cable
F Connectors
BKeying Configurations
Housings
25
Figure q
Figure w
Figure e
Figure r
25
Key polarizing USCAR-19
Part Number
GT5-2S-HU
CL No.
Material
PBT
Color
RoHS
YES
code
Coding
755-0044-1
755-0059-9
755-0060-8
755-0097-8
755-0098-0
Light Gray
Brown
D2
Figure q
GT5-2S-HU(A)
GT5-2S-HU(B)
GT5-2S-HU(C)
GT5-2S-HU(D)
A2
B2
C2
Figure w
Figure e
Figure r
Figure q
GT5-2P/S-R
BShown with inserted retainer.
Green
Blue
Light Gray
Note 1: Used with separate retainer (GT5-2P/S-R).
Note 2: Please use a mating F connector of a matching key type.
M Connectors
BRecommended Mounting Bracket dimensions.
4.75min.
17.75
Housings[Panel Mounted Housing]
5
2.8
1.5
1.3
Tin plating
30
25
5
14.5
8
21.8
CAV NO
BFully mated connector assemblies
41.4
GT5-2S-HU
GT5-2P/S-R
GT5-2P/S-R
BKeying Configurations
Key polarizing RoHS
Part Number
CL No.
Color
code
755-0045-4-70
755-0063-6-70
755-0064-9-70
Light Gray
Brown
GT5-2PP-HU(70)
Figure q
Figure w
Figure q
Figure w
Figure e
Figure r
GT5-2PP-HU(A)(70)
GT5-2PP-HU(B)(70)
GT5-2PP-HU(C)(70)
GT5-2PP-HU(D)(70)
Part
Housing
Ground terminal
Material
Finish
Green
Figure e YES
Figure r
755-0099-3-70
____
Blue
PBT
-
Light Gray
Figure q
Phosphor bronze
Tin plating
Note1: Used with separate retainer (GT5-2P/S-R).
Coding D2 at USCAR-19 is GT5-2PP-HU.
Note2: Refer to page 27 for panel mounting in-line bracket.
15
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5 Series
Housing
18.8
30
25
BFully Mated connector assemblies
41.4
GT5-2S-HU
GT5-2P/S-R
GT5-2P/S-R
Part Number
CL No.
Material
PBT
Color
RoHS
YES
GT5N-2PP-HU
755-0055-8
Light gray
Note :Used with separate retainer (GT5-2P/S-R).
Retainer – 2 position (Used with GT5-2S-HU, GT5-2PP-HU,
and GT5N-2PP-HU)
14.8
CAV NO
Part Number
GT5-2P/S-R
CL No.
Material
PBT
Color
RoHS
YES
755-0046-7
Dark gray
BKeying Configurations
Housing
18.8
Figure q
Figure w
Figure e
Figure r
BRecommended Board Mounting
BMounted and fully mated
connector assemblies
Pattern
5.45
21.3
7
27.4
7.7
Key polarizing USCAR-19
Part Number
CL No.
755-0043-9-70
Material
Color
RoHS
code
Coding
GT5-2P-DS(70)
Light Gray
Brown
D2
Figure q
GT5-2P-DS(A)(70) 755-0061-0-70
GT5-2P-DS(B)(70) 755-0062-3-70
GT5-2P-DS(C)(70) 755-0101-3-70
GT5-2P-DS(D)(70) 755-0102-6-70
A2
B2
C2
Figure w
Figure e
Figure r
Figure q
PBT
Green
YES
GT5-2P-DS (C)(70)
GT5-2P-DS (70) GT5-2P-DS (A)(70) GT5-2P-DS (B)(70)
Recommended Panel Cut-out
Blue
Light Gray
Note: Use JIS B 1115 and 1122 class 4, nominal diameter 3, length 6 screws
(for a board thickness of 1.6 mm) for the mounting screws.
Coding D2 at USCAR-19 is GT5-2P-DS.
16
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5 Series
Power Supply Terminals
F Connector Terminals
2.3
2.8
Outer
RoHS
YES
Part Number
CL No.
Material
Finish
Conductor Size (AWG)
Packaging
Diameter
GT7-2022SCF(70)
757-0001-1-70
#20 to 22
#20 to 22
1.4 to 2.4mm 5,000pcs.per reel
2.6 to 3.1mm 3,000pcs.per reel
Copper alloy
Tin plating
GT7A-2022SCF(70) 757-0003-7-70
Note 1: Sold by the reel. (See above table for number of Packaging.)
Note 2: This component is used only with applicable HRS housings.
M Connector Terminals
2.8
1.9
2.7
Outer
RoHS
YES
Part Number
CL No.
Material
Brass
Finish
Conductor Size (AWG)
Packaging
Diameter
GT7-2022PCF(70)
GT7A-2022PCF(70)
757-0002-4-70
757-0004-0-70
#20 to 22
#20 to 22
1.4 to 2.4mm 5,000pcs.per reel
2.6 to 3.1mm 3,000pcs.per reel
Tin plating
Note 1: Sold by the reel. (See above table for number of Packaging.)
Note 2: This component is used only with applicable HRS housings.
17
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5 Series
Combinaton Type (Two Single-Conductor Coaxial shielded Cables + One Power contact)
F Connectors
BShown with inserted retainer.
Housing
Retainer
25
Part Number
GT5-2/1S-HU
CL No.
Material
PBT
Color
RoHS
YES
755-0009-0
Light gray
Note : Used with separate retainer (GT5-2/1S-R).
Retainer (exclusively for GT5-2/1S-HU)
17.28
Part Number
GT5-2/1S-R
CL No.
Material
PBT
Color
RoHS
YES
755-0003-4
Dark gray
B
Recommended Board Mounting Pattern
M Connectors
Connector assembly, Printed
Circuit Board mounting
For power supply
21.3
23.3
For inner conductor
For outside conductor
Thickness :
1.6mm
BRecommended Panel Cut-out
13.3
0.3
Part
Housing
Material
Finish
PBT
Brass
PBT
Color: Light gray
Tin plating
Dark gray
0. 64x1.1 Terminal
Insulator
Part Number
CL No.
RoHS
YES
Outer terminal
Phosphor bronze
Brass
Tin plating
Tin plating
GT5-2/1P-DS(70) 755-0014-0-70
Tub terminal for DS 070
Note: Use JIS B 1115 and 1122 class 4, nominal diameter 3, length 6 screws (for a board
Board
thickness of 1.6 mm) for the mounting screws.
18
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5 Series
BShown with inserted retainer.
M Connectors
Housing - with External Ground
Retainer
30
26.3
B
Recommended Mounting Bracket Dimensions
17.75
4.75min.
5
2.8
Mounting bracket
attachment side
1.5
Outside ground connection
Part Number
CL No.
Part
Material
PBT
Finish
RoHS
YES
Housing
Color: Light gray
Tin plating
Tin plating finish
GT5-2/1PP-HU(70)
755-0008-8-70
Ground terminal
Phosphor bronze
5
Note 1: Used with separate retainer (GT5-2/1PP-R ).
Note 2: Refer to page 27 for panel mounting in-line bracket.
14.5
8
Housing - without External Ground
30
25
23.3
Part Number
CL No.
Material
PBT
Color
RoHS
YES
GT5N-2/1PP-HU
755-0013-8
Light gray
Note : Used with separate retainer GT5-2/1PP-R.
Retainer (Used with GT5N-2/1PP-HU and GT5-2/1PP-HU)
15.36
GT5-2/1PP-R
Part Number
GT5-2/1PP-R
CL No.
Material
PBT
Color
RoHS
YES
755-0010-0
Dark gray
19
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5 Series
4-Position – Single conductor shielded Coaxial cable
BShown with inserted retainer.
F Connector
GT5-4P/S-R
25
USCAR-19
Part Number
GT5-4S-HU
CL No.
Material
PBT
Color
RoHS
YES
Coding
Light gray
755-0056-0
D4
Note: Used with separate retainer (GT5-4P/S-R).
M Connector
35.8
30
21.5
14.6
31.9
3
9.2
8.5
USCAR-19
Part Number
CL No.
Material
PBT
Color
RoHS
YES
Coding
GT5N-4PP-HU
755-0057-3
Light gray
D4
Note 1: The product should be used with a low-force insertion/withdrawal
M connector terminal.
Note 2: Used with separate retainer GT5-4P/S-R.
Retainer (Used with GT5-4S-HU and GT5N-4PP-HU)
14.8
Part Number
GT5-4P/S-R
CL No.
Material
PBT
Color
RoHS
YES
755-0058-6
Dark gray
20
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5 Series
M Connector
Connector assembly, Printed Circuit Board Mounting
12.6
Lot No.
USCAR-19
Coding
Part Number
CL No.
RoHS
YES
GT5-4P-DS(70)
755-0087-4-70
D4
Item
Material
Color / Finish
Light gray
Tin plating
Dark gray
Tin plating
Housing
0.64✕1.1Terminal
Insulator
PBT
Brass
PBT
Outer terminal
Phosphor bronze
21.3
15.1
PIN No
CAV NO
5.25
3
4
10
24
B Recommended Board Mounting Pattern
For center conductors
B Recommended Panel Cut-out
14.2
0.3
For outer conductors
Panel Outline
B Mounted and fully mated connector assemblies
21.3
PCB
M3 Screw
Panel
Board
21
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5 Series
For Single Conductor Coaxial shielded Cable - Waterproof Type
F Connector
36
Housing
Part Number
GT5W-1S-HU
CL No.
Color
Material
PBT
RoHS
YES
755-0027-2
Light gray
Note: Specific retainer is determined by the type of the cable used.
Retainer (Used with GT5W-1PP-HU, GT5JW-1PP-HU,
GT5W-1S-HU and GT5W-1P-HU)
15.4
8.7
Part Number
GT5W-1P/S-R
CL No.
Color
Material
RoHS
YES
PBT
Dark gray
Dark blue
755-0028-5
Silicon rubber Compound
Note: Outer diameter of the cable must be within 2.9 to 3.4 mm. Consult nearest HRS
representative for other diameters.
22
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5 Series
M Connectors
34
Housing
Part Number
GT5W-1P-HU
CL No.
Part
Material
Color
RoHS
YES
Housing
PBT
Light gray
White
755-0026-0
Connector seal
Silicon rubber Compound
Note: Use correct retainer.
Housings - Bracket Mounting
BMounted and fully mated connector assemblies
BRecommended Bracket Dimensions Diagram(for GT5W-1PP-HU)
Please check elsewhere for information about the bracket for
GT5JW-1PP-HU.
Part Number
CL No.
Part
Material
Color
RoHS
YES
GT5W-1PP-HU
GT5JW-1PP-HU
755-0070-1
755-0069-2
Housing
PBT
Light gray
White
Connector seal
Silicon rubber Compound
23
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5 Series
14.6
10.8
G Terminals
For Direct Coaxial Shielded
Cable Termination
9.3
BBoard Termination Pattern
2.8
2.3
1
Lands
BRecommended Completed Termination cross section
1.9
1.5D-2V or equivalent
RoHS
1,500 pcs. Per reel YES
Part Number
CL No.
Material
Brass
Finish
Packaging
GTA-1.6CF (70)
755-0032-2 -70
Tin plating
7
2
3.5
BCompleted Termination cross section
1.5D-2V or equivalent
3.5
Pre-
solder
Heat-shrink
tubing
3.5
B
Board Termination Pattern
3.5
RoHS
YES
Part Number
CL No.
Material
Brass
Finish
Packaging
GTB-1.6CF(70)
755-0049-5-70
Tin plating
1,500 pcs. Per reel
BCompleted Termination cross section
1.9
1.5D-2V or equivalent
6.9
6.3
3
2
3.5
7
Heat-shrink tubing
B
Board Termination Pattern
2.9
2.3
Lands
0.4
Part Number
G-1.6PCF(70)
CL No.
Material
Brass
Finish
Packaging
1,500 pcs. Per reel
RoHS
YES
755-0029-8-70
Tin plating
24
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5 Series
6.15
0.25
For Direct Coaxial Cable Termination
0.25
10.5
9
15
0.5
2
BRecommended Board
Termination Pattern
2.9
1
3.3
Lands
BCompleted Termination Cross Section
1.9
Pre-solder
Part Number
GTA-0.7CF
CL No.
Material
Brass
Finish
Packaging
1,500 pcs. Per reel
RoHS
2.8
3.5
755-0074-2
Tin plating
YES
13.6
9.8
2.8
0.15
0.25
8.55
0.5 1.5
BRecommended Board
Termination Pattern
1.9
2.6
2.4
BRecommended Completed Termination cross
1.8
section
1.9
Pre-solder
Lands
Lands
Part Number
GTB-0.7CF
CL No.
Material
Brass
Finish
Packaging
1,500 pcs. Per reel
RoHS
YES
0.7D
equivalent
755-0075-5
Tin plating
7.4
0.7 3.5
BRecommended Board
Termination Pattern
BRecommended Completed Termination cross
section
RoHS
YES
Part Number
GTE-3.7CF
CL No.
Material
Brass
Finish
Packaging
755-0122-3
Tin plating
1,100 pcs. Per reel
25
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5 Series
BRecommended Panel Cut-out
For Mid-Cable Termination
A
A
C
4.6
8.2
6.5
2.5
B
B
2.5
C
0.2
Raised point of
contact
BAttachment Diagram
6
Panel
T-0.4
For use with
coaxial cables
2.9 to 3.4 mm.
outside diameter.
Part Number
CL No.
Material
Brass
Finish
Packaging
1
RoHS
YES
GT-1.6PG-C(70)
755-0031-0-70
Tin plating
Setscrew (M2.5)
Bottom Shield cover
5.4
5
For Improved Electronic Noise Compatibility
5.6
Mounted Condition Installed
Part Number
CL No.
Material
Brass
Finish
RoHS
YES
GT5-1P/S-CSB(70)
755-0048-2-70
Tin plating
Top Shield cover
5.6
T=0.25
Mounted Condition Installed
Part Number
CL No.
Material
Brass
Finish
RoHS
YES
GT5C-1P-CSB( 70)
755-0088-7-70
Tin plating
26
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5 Series
Panel Mounting In-line Bracket
4.5
9.8
T=1
1.1
12
8
Part Number
GT-BK(70)
CL No.
Material
SPCC
Finish
Used with connectors
RoHS
YES
GT5-1PP-HU(70), GT5-1PP-HU(B)(70)
GT5-1PP-HU(A)(70), GT5-1PP-HU(D)(70)
GT5-1PP-HU(C)(70), GT5-1PP-HU(I)(70)
GT5-1PP-HU(E)(70), GT5-1PP-HU(K)(70)
GT5-1PP-HU(J)(70), GT5-2PP-HU(70)
GT5-2/1PP-HU(70), GT5-2PP-HU(B)(70)
GT5-2PP-HU(A)(70), GT5-2PP-HU(D)(70)
GT5-2PP-HU(C)(70)
751-0039-6-70
Tin plating
B Termination Tools
User's manuals are available. Please ask your Hirose Electric account representative.
Automatic crimping machine
Specifications
Item
Specification
Stroke length
Number of strokes
Weight
Specification
Remarks
1.5tons
30mm
200spm(50Hz)
75kg
200spm(60Hz)
AC100V
Motor
0.2kW
Crimping speed
2000 to 4000pcs. Per hour
Part Number CM-105
* Crimp height setting tables are available for each cable type. Please contact your
nearest Hirose Electric account representative.
Different cables will require different crimp height settings.
27
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5 Series
● Harnes Tool
Name of Applicabe Terminal
Name of Applicabe Applicator
CL No.
AP105-GT5-30/0.7-1.5P
AP105-GT5-30/0.7-1.5S
GT5-30/0.7-1.5PCF(70)
GT5-30/0.7-1.5SCF(70)
GT5-2428/1.1-2.2SCF
GT5-2428/1.6-2.5PCF(70)
GT5-2428/1.6-2.5SCF(70)
CL901-5021-8
CL901-5080-7
CL901-5171-0
CL901-5100-2
CL901-5101-5
CL901-5019-6
CL901-5017-0
CL901-5040-2
CL901-5020-5
CL901-5018-3
CL901-5029-0
CL901-5031-1
CL901-5103-0
CL901-5030-9
CL901-5032-4
CL901-5104-3
CL901-5088-9
CL901-5091-3
CL901-5092-6
CL901-5075-7
CL901-5076-0
CL901-5037-8
CL901-5038-0
CL901-5058-8
CL901-5059-0
CL901-5070-3
CL901-5060-0
CL901-5061-2
CL901-5071-6
CL901-5033-7
CL901-5034-0
CL901-5035-2
CL901-5056-2
CL901-5036-5
CL901-5057-5
CL901-5054-7
CL901-5052-1
CL901-5121-2
CL901-5105-6
CL901-5055-0
CL901-5053-4
CL901-5102-8
CL901-5106-9
CL901-5041-5
AP105-GT5-2428/1.1-2.2S-ID
AP105-GT5-2428/1.6-2.5P
AP105-GT5-2428/1.6-2.5S
AP105-GT5-30/1.6-2.9P-ID
AP105-GT5-30/1.6-2.9P
AP105-GT5-30/1.6-2.9P-A
AP105-GT5-30/1.6-2.9S-ID
AP105-GT5-30/1.6-2.9S
AP105-GT5-2428/1.6-2.9P
AP105-GT5-2428/1.6-2.9PWS
AP105-GT5-2428/1.6-2.9P-B
AP105-GT5-2428/1.6-2.9S
AP105-GT5-2428/1.6-2.9SWS
AP105-GT5-2428/1.6-2.9S-B
AP105-GT5-2022/1.6-2.9S
AP105-GT5-2022/F2.7-3.5P
AP105-GT5-2022/F2.7-3.5S
AP105-GT5-2022/F3.3-3.8P
AP105-GT5-2022/F3.3-3.8S
AP105-GT5-2428/F3.3-5P-ID
AP105-GT5-2428/F3.3-5S-ID
AP105-GT5-2022/F3.3-5P-ID
AP105-GT5-2022/F3.3-5P
AP105-GT5-2022/F3.3-5P2.2D-ID
AP105-GT5-2022/F3.3-5S-ID
AP105-GT5-2022/F3.3-5S
AP105-GT5-2022/F3.3-5S2.2D-ID
AP105-GT5-30/F4-5P-ID
GT5-30/1.6-2.9PCF(70)
GT5-30/1.6-2.9SCF(70)
GT5-2428/1.6-2.9PCF(70)
GT5-2428/1.6-2.9SCF(70)
GT5-2022/1.6-2.9SCF(70)
GT5-2022/F2.7-3.5PCF(70)
GT5-2022/F2.7-3.5SCF(70)
GT5-2022/F3.3-3.8PCF(70)
GT5-2022/F3.3-3.8SCF(70)
GT5-2428/F3.3-5PCF(70)
GT5-2428/F3.3-5SCF(70)
GT5-2022/F3.3-5PCF(70)
GT5-2022/F3.3-5SCF(70)
GT5-30/F4-5PCF(70)
GT5-30/F4-5SCF(70)
AP105-GT5-30/F4-5S-ID
AP105-GT5-2428/F4-5P-ID
AP105-GT5-2428/F4-5P-3C2V
AP105-GT5-2428/F4-5S-ID
AP105-GT5-2428/F4-5S-3C2V
AP105-GT5-2022/F4-5P-ID
AP105-GT5-2022/F4-5P
AP105-GT5-2022/F4-5P-18ID
AP105-GT5-2022/F4-5P-RG58
AP105-GT5-2022/F4-5S-ID
AP105-GT5-2022/F4-5S
GT5-2428/F4-5PCF(70)
GT5-2428/F4-5SCF(70)
GT5-2022/F4-5PCF(70)
GT5-2022/F4-5SCF(70)
AP105-GT5-2022/F4-5S-18ID
AP105-GT5-2022/F4-5S-RG58
AP105-G-1.6P
G-1.6PCF(70)
GTA-0.7CF
GTB-0.7CF
GTA-1.6CF(70)
GTB-1.6CF(70)
.
AP105-GTA B-0.7P
.
AP105-GTA B-0.7P
.
AP105-GTA B-1.6P
CL901-5047-1
CL901-5047-1
.
AP105-GTA B-1.6P
28
©2020 ICPDF网 联系我们和版权申明