H/MSA3106B18-10PY-N [HRS]
MS type Lower Profile Plug(Circular connector conforming to MIL-C-5015); MS型放低姿态插头(圆形连接器符合MIL - C- 5015 )型号: | H/MSA3106B18-10PY-N |
厂家: | HRS |
描述: | MS type Lower Profile Plug(Circular connector conforming to MIL-C-5015) |
文件: | 总29页 (文件大小:1285K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
NEW
MS type Lower Profile Plug
H/MS Series
Circular connector conforming to MIL-C-5015
PAT.P
Connector Height Comparison
18-10 Size
50.1mm
45.5mm
Existing MS Connector
Lower-profile Plug
22-22 Size
48.2mm
53.2mm
■Features
1. 20% Height Reduction
When compared with existing H/MS Series connectors
the overall height of plug assemblies is lower, allowing it
to be used in space constrained applications.
2. Cable Exit in 360° Directions
Existing MS Connector
Lower-profile Plug
The cable can exit in any of the 8 fixed direction, in 45°
increments.
3. Simple Assembly
Cable Exit Direction of 360°
The 2-piece design consisting of the contact/insulator
assembly and the back-shell assembly allows termination
without the use of any specialized tools.
4. Water and Dust Protection
IP 67 rating when fully terminated and mated with
corresponding part.
5. TUV Certification
Provided with a protective circuit function for TUV
certification. The (D) pin is directly connected to the
outside metal case.
■Applications
Plug
Can be changed
in 45 degree increments
Factory automation equipment, robotic equipment, servo
motors, and a wide variety of industrial and measuring
instruments.
2004.6
1
■Product Specifications
Voltage rating
250VAC, 250V DC (pollution degree: 3, overvoltage category: 3)
500V AC, 500V DC (pollution degree: 2, overvoltage category: 2)
23A Max. (18-10 size)
Operating temperature range
-25ç to +125ç
Storage temperature range
-25ç to +125ç
Rating
Current rating
46A Max. (22-22 size)
Specification
22-22 size
Item
Conditions
18-10 size
1. Contact resistance
3 m ohms max.
1 m ohms max.
1A DC
2. Insulation resistance 5000 M ohms min.
500 V DC
3. Withstanding voltage No flashover or insulation breakdown.
2250V AC/one minute.
Frequency: 10 to 500 Hz, single amplitude of 0.75 mm,
4. Vibration
2
acceleration of 98 m/s for 3 hours in 3 axis.
No electrical discontinuity for 10 ms max.
2
Acceleration of 490 m/s , 11ms duration, sine half-wave
5. Shock
waveform, 3 cycles in each of the 3 axis.
6. Durability
Contact resistance:
4.5 m ohms max.
Contact resistance:
1.5 m ohms max.
500 cycles
(insertion/ withdrawal)
Temperature: -55ç ■ Room temperature to +125ç ■ Room
temperature Time: 30 ■ 10 to 15 ■ 30 ■ 10 to 15 (Minutes)
5 cycles.
7. Temperature cycle
Insulation resistance: 5000 M ohms min.
Insulation resistance: 50 M ohms min. (Humidity state)
500 M ohms min. (Dry state)
8. Humidity
96 hours at temperature of 71ç and humidity of 95% .
9. Water/dust
protection
No dust penetration.
When mated with corresponding connector.
No water penetration when submerged for 0.5 hour at the depth of 1 meter.
■Materials
Item
Material
Aluminum alloy
PPS
Finish
Remarks
-------------------
UL94V-0
Body
Black chromate
Color: Black
Silver plating
Color: Black
Color: Black
Insulator
Socket Contacts
Gasket
Copper alloy
Silicone Rubber
Chloroprene rubber
-------------------
-------------------
-------------------
Bushing
■Additional Product Information
1. Product number suffixes
(10) Supplied with a wire hole in the locking ring (to prevent loosening of the ring).
(11) Supplied without the wire hole in the locking ring.
2. Corresponding receptacles.
18-10 Size: Part number H/MS3102A18-10P-D-T1(10)
22-22 Size: Part number H/MS3102A22-22P-D-T(10)
2
■Plug
41
H/MS08A18-10S-DT10D(10)
A
D
B
CX
18-10S
3 0 5 7 - 1 0
31
Shown one type.
Part Number
CL No.
Number of Contacts
Weight
Applicable Cable Diameter Contact solder pot inner diameter
H/MS08A18-10S-DT10D(10)
H/MS08A18-10S-DT10D(11)
H/MS08A18-10S-DT10D1(10)
H/MS08A18-10S-DT10D1(11)
120-0476-3-10
120-0476-3-11
120-0481-3-10
120-0481-3-10
Ø12~Ø14.3mm
2.5mm
4
89g
Ø10~Ø12.5mm
41
H/MS08A18-10S-DT10C(10)
A
D
B
CX
18-10S
Ø30
Shown one type.
Part Number
CL No.
Number of Contacts
Weight
Applicable Cable Diameter Contact solder pot inner diameter
H/MS08A18-10S-DT10C(10)
H/MS08A18-10S-DT10C(11)
120-0480-0-10
120-0480-0-11
4
77.6g
Ø13~Ø14.3mm
2.5mm
45.8
H/MS08A22-22S-DT12D(10)
A
D
22-22S
C
B
3 0 5 7 - 1 2
36
Shown one type.
Part Number
CL No.
Number of Contacts
Weight
Applicable Cable Diameter Contact solder pot inner diameter
H/MS08A22-22S-DT12D(10)
H/MS08A22-22S-DT12D(11)
H/MS08A22-22S-DT12D1(10)
H/MS08A22-22S-DT12D1(11)
120-0477-6-10
120-0477-6-11
120-0482-6-10
120-0482-6-11
Ø13~Ø15.9mm
4.5mm
4
127g
Ø10~Ø13.5mm
3
BAssembly Procedures
Process
Outline of assembly
Pre-solder
Conductor portion
Contacts
A
Back-shell
Bushing
Solder
1
Insulator/contact assembly
Washer
Table 1
Cable
Strain relief clamp
A
B
18-10 Size
22-22 Size
24mm
33mm
13mm
15mm
a. Pass the strain relief clamp, washer, bushing, and hood over the cable, in this order.
b. Prepare the cable and conductors per the dimensions in Table 1.
c. Bend the exposed conductor to the B dimension as indicated in Table 1.
d. Pre-solder the exposed conductor and solder it as shown to the exposed contact.
Note: Use care not to damage the conductor’s insulation.
4.5 mm min.
Strain relief clamp
Screw
Cable
Back-shell
Set screw
(Hexagonal hole opposite side 1.27 mm)
Locking ring
Table 2
Clamp
Washer
2
Locking Ring
Cable Clamp
Bushing
•
•
m
3 to 3.5N
m
5 to 6N
a. Place over the contact/insulator assembly (in the following order:Back shell, bushing, washer, strain relief clamp).
b. Tighten the Locking ring and Cable clamp to the torque values per Table 2.
c. Tighten the set screw to a torque value of 0.3-0.4 N-m
HRS recommended tool: PB205/1.27 (CL150-0066-3)or equivalent.
d. Using screwdriver tighten the two strain relief clamp screws until both sides of the moveable part are in contact with the cable clamp.
®
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933
http://www.hirose.com
The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.
4
相关型号:
©2020 ICPDF网 联系我们和版权申明