H2.4 [HRS]
2.4mm coaxial connectors for frequency test measurements;
| 型号： | H2.4 |
| 厂家： | 
HRS |
| 描述： | 2.4mm coaxial connectors for frequency test measurements |
| 文件： | 总4页 (文件大小：159K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
2.4mm coaxial connectors for frequency test measurements
H2.4 Series
Compatible with 50GHz configurations
Features
●
Frequency characteristics (Typical values)
1. 2.4mm coaxial connector based on
MIL Specifications
◆H2.4-P-SF085 with double ended harness
assembly, frequency characteristics
(Cable length : 100mm)
(MIL-STD-348B)
2. Compatible with the frequency range
of up to 50GHz
FREQUENCY CHARACTERISTICS
2
1.9
1.8
1.7
1.6
1.5
1.4
1.3
1.2
1.1
1
0
-1
-2
-3
-4
-5
3.Easy to mount
Simplified mounting with attaching screws.
4.Can be adapted to various PCB thicknesses
Screw-on mounting allows attachment to PCB
boards with different thicknesses.
0
10
20
30
40
50
5. Gold plating on the PCB evaluation
side provides stable grounding
FREQUENCY[GHz]
6. Applicable cable : 0.085 inch semi-
flexible cable.
◆H2.4-R-SR2 frequency characteristics
7.RoHS-compatible
FREQUENCY CHARACTERISTICS
Compliant with all RoHS Directives.
2
1.9
1.8
1.7
1.6
1.5
1.4
1.3
1.2
1.1
1
0
-0.2
-0.4
-0.6
-0.8
-1
-1.2
-1.4
-1.6
-1.8
-2
0
10
20
30
40
50
FREQUENCY[GHz]
1
q
2016.8
H2.4 Series●2.4mm coaxial connectors for frequency test measurements
Product Specifications
Nominal characteristic
Operating Temperature
Range
Storage Temperature
Range
50ø
-55ç to +105ç (95% RH or less)
-55ç to +50ç (95% RH or less)
Conditions
impedance
Ratings
Rated frequency
DC to 50GHz
Items
Specifications
Center : Less than 4mø
External : Less than 2mø
1. Contact resistance
Measured at less than 100mA
1,500Mø min. (H2.4-P-SF085)
5,000Mø min. (H2.4-R-SR2)
2. Insulation resistance
Measured at 500V DC
500V AC for one minute
3. Withstanding voltage No flashover or breakdown
●H2.4-P-SF085
V.S.W.R. : Less than 1.35 (DC to 40GHz)
●H2.4-R-SR2
V.S.W.R. : 1.35 (DC to 26.5GHz)
4. Voltage standing
wave ratio
V.S.W.R. : Less than 1.45 (40GHz to 50GHz) V.S.W.R. : 1.4 (26.5GHz to 40GHz)
V.S.W.R. : 1.45 (40GHz to 50GHz)
Contact resistance at center : Less than 6mø
5. Mating Cycles
External : Less than 4mø
500 cycles
No broken, cracked, or loose parts
No electrical discontinuity for more than
1μs.
No broken, cracked, or loose parts
No electrical discontinuity for more than
1μs.
Frequency : 10 to 2000Hz, half amplitude : 0.75mm,
Acceleration : 196m/s2, 10 cycles in each of 3 axis
directions
Acceleration : 980m/s2, duration : 6ms,
Wave form : half-sine wave, 3 times in each of
3 directions
6. Vibration resistance
7. Shock resistance
No broken, cracked, or loose parts
Insulation resistance : More than 100Mø
8. Moisture resistance of (in a high humidity environment)
Left for 10 cycles (240 hours) in an environment with
temperature/humidity Insulation resistance : More than 5,000Mø the temperature ranging from -10 to 65°C and the
cycle
(in a dry environment)
humidity ranging from 90 to 98%.
No broken, cracked or loose parts
Temperature : 5 cycles for a series of time periods :
_55ç for 30 minutes → 3 minutes →
9. Temperature cycle
10. Salt spray
No broken, cracked or loose parts
+105ç for 30 minutes → 3 minutes
No considerable corrosion
Continuous 48 hour cycle in 5% salt water solution
*Measurement of voltage standing wave ratio (V.S.W.R.)
The specified values of the voltage standing wave ratio (V.S.W.R.) noted above, are taken with the test set up shown in the
figure below:
H2.4-P-SF085 measurement system
Network Analyzer
D.U.T.
D.U.T. details
H2.4-P-SF085 with double ended harness
Test Port Cable
H2.4-R-SR2 measurement system
D.U.T. details
H2.4-R-SR2
H2.4-R-SR2
Materials / Finish
Part
Materials
Stainless steel
PTFE resin
Finish
Shell
Passivated
---------------
Gold plating
Gold plating
Insulator
Contact
Ring
Beryllium copper
Stainless steel
2
H2.4 Series●2.4mm coaxial connectors for frequency test measurements
Plug
ꢀH2.4-P-SF085
13.6
8 HEX
11.6
[Please place cable assembly orders per the specifications below]
Cable assembly specifications
B
Please specify the dimensions of H2.4 Series cable assembly as follows:
[Double ended assembly]
[Single ended assembly]
L(mm)
L(mm)
■
Composition of the cable harness specification product number structure
Refer to the chart below when determining the product specifications from the product number.
Please select from the product numbers listed in this catalog when placing orders.
H2.4
SF085N 1
L
「」
- P -
- A - RS
q
w
e
r
❺
H2.4
qSeries name :
Harness type
w
None : On either end 2 : On both ends
Cable type
e
SF085N : 0.085-inch, semi-flexible cable
rCable color
: No jacket
ꢀNone
: Blue
ꢀ1
❺Overall length L (mm) : Length L is expressed by the unit of mm.
■Standard tolerance of the overall length of the cable harness
Overall length L (mm）
Standard tolerance (mm)
100≤L≤200
4
8
200<L≤500
500<L≤1000
12
1000<Lꢀꢀꢀ
1.5%
*Please contact us when you intend to use cables with a length of 100mm or less.
3
H2.4 Series●2.4mm coaxial connectors for frequency test measurements
■PCB vertical mount receptacle
9.6
5.8
1.7
2×0-80UNF-2B
M7×0.75-6g
Part No.
HRS No.
Attached screw
---------------
RoHS
H2.4-R-SR2
338-0601-8
H2.4-R-SR2（11）
H2.4-R-SR2（12）
338-0601-8 11
338-0601-8 12
0-80UNF 1/4inch
0-80UNF 3/16inch
○
This receptacle is for highfrequency measurement only.
It cannot be used actual machine.
®
2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
+
+
TEL: 81-45-620-3526 Fax: 81-45-591-3726
http://www.hirose.com
http://www.hirose-connectors.com
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.
The contents of this catalog are current as of date of 08/2016. Contents are subject to change without notice for the purpose of improvements.
4
相关型号：
©2020 ICPDF网 联系我们和版权申明