HA16RA-3P(76) [HRS]

Audio Connectors; HRS No: 104-0382-2 76; No. of Positions: 3; Connector Type: Panel; Contact Gender: Male; Shell Size (dia): 16; Termination Style: Soldering; Current Rating(Amps)(Max.): 15; Rated Voltage(VAC): 130; Mating/Unmating Cycles: 1000; Contact Mating Area Plating: Silver; Operating Temperature Range (degrees C): -25 to 70; General Description: Receptacle; Straight; Panel mounting with small flange; Push-pull lock;


型号：	HA16RA-3P(76)
厂家：	HRS
描述：	Audio Connectors; HRS No: 104-0382-2 76; No. of Positions: 3; Connector Type: Panel; Contact Gender: Male; Shell Size (dia): 16; Termination Style: Soldering; Current Rating(Amps)(Max.): 15; Rated Voltage(VAC): 130; Mating/Unmating Cycles: 1000; Contact Mating Area Plating: Silver; Operating Temperature Range (degrees C): -25 to 70; General Description: Receptacle; Straight; Panel mounting with small flange; Push-pull lock
文件：	总12页 (文件大小：847K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Circular Connectors for Audio Equipment

HA Series

Features

1.Circular connectors with lock

mechanism for audio equipment

Additional grounding feature prevents external

noise.

This series includes four different receptacle

sizes and two types of cable clamping

mechanisms used on the plugs. Receptacle

selection will depend on your particular design

and available mounting space.

Product Speciﬁcations

No. of

Operation

temperature range

Storage temperature

range

Rated voltage

Rated current

contacts

15A

Ratings

3 A (PCB dip type)

AC130V DC180V

-25 to +70

-10 to +60

℃

Items

Speciﬁcations

Conditions

Measured at DC 1 A

3 and 4 contacts: 5 mø max.

3 contacts (PCB dip type), 5 contacts: 10 mø min.

1. Contact resistance

2. Insulation

resistance

1,000 Mø min.

Measured at DC 500 V

3. Withstanding

voltage

No ﬂashover or dielectric breakdown.

AC 1,400 V for one minute

4. Vibration

resistance

10 to 55 Hz/cycle, amplitude: 0.75 mm, in 3 axis

directions, for 2 hours each direction

No electrical discontinuity for 10 µs or greater

Acceleration: 490 m/s², duration: 11 ms, 3 axis

directions, 3 cycles each direction

5.Shock resistance

6. Mating Cycles

No electrical discontinuity for 10 µs or greater

3 and 4 contacts: a maximum of 10 mø

3 contacts (PCB dip style)

1,000 times

5 contacts: 20 mø max.

-55°C: 30 minutes Normal temperature: 10

➝

7. Temperature cycle Insulation resistance: 1,000 Mø max.

to 15 minutes 85°C: 30 minutes Normal

➝ ➝

temperature: 10 to 15 minutes, left for 5 cycles

Insulation resistance: 10 Mø (at high humidity) min. Temperature: 40°C, relative humidity: 90 to 95%,

100 Mø (when dry) min. left for 96 hours

8. Moisture

resistance

Materials

Parts

Material

Finish

Remarks

――――

UL94V-0

――――

Shell

Aluminum alloy or zinc alloy

Polyamide resin or PBT resin

Copper alloy

Matte ﬁnished, nickel plating

Insulator

Contact

――――

Silver plating

2014.11w

HA Series●Circular Connectors for Audio Equipment

Ordering information

Plug and receptacle

HA 16 PR N 3 S F A (**)

t y u

Model name: HA Series

Shell size: Shell size is the outer diameter of the mating interface of the plug.

Connector shape:

P: Plug

R: Receptacle

PR: Plug receptacle

J: Jack

Shell variation: A, B, C, etc. is used to note exterior shell changes.

Number of contacts

Contact form:

P: Male contact

S: Female contact

Contact termination method or shape: A, B, C, etc. is used to note any changes to the termination method or type.

Gang type: Notes a ganged arrangement of receptacles.

Other speciﬁcations: A two-digit number is added to indicate other speciﬁcations.

HA Series●Circular Connectors for Audio Equipment

Plug

Guide key

(Representative example)

No. of

HRS No.

Part No.

ØA

Weight Remarks

----------

contacts

104-0359-0 71 HA16PA-3S(71)

104-0426-6 71 HA16PK-4S(71)

4.5 86

HA16PA-3S(71)

ｇ

----------

Ａ

Ｂ

(Representative example)

No. of

HRS No.

Part No.

Weight Remarks

----------

contacts

104-0701-9 71 HA216P-3S(71)

104-0702-1 71 HA216P-4S(71)

104-0703-4 71 HA216P-5S(71)

78.5 53.5

77.7 52.7 40

78.5 53.5

----------

ｇ

HA216P-4S(71)

Jack

Guide Notch

１

２

３

(Representative example)

No. of

Part No.

HRS No.

ØA Weight Remarks

contacts

104-0358-8 76

HA16JA-3P(76)

4.5

----------

ｇ

HA16JA-3P(76)

(Representative example)

No. of

contacts

HRS No.

Part No.

Weight Remarks

----------

104-0704-7 76

104-0705-0 76

104-0706-2 76

HA216J-3P(76)

HA216J-4P(76)

HA216J-5P(76)

----------

ｇ

HA216J-4P(76)

HA Series●Circular Connectors for Audio Equipment

Receptacle (Solder Type)

(Large Flange Type)

22.5

Guide Notch

Ground lug

１

２

３

(Representative example)

No. of

Part No.

HRS No.

104-0349-7 76

Weight

Remarks

----------

contacts

HA16R-3P(76)

ｇ

(Medium Flange Type)

Ground lug

2.5

21.5

27.1

(Representative example)

No. of

Part No.

HRS No.

Weight

Remarks

contacts

104-0393-9 76

104-0402-8 76

HA16RD-3P(76)

----------

HA16RD-3P(76)

ｇ

HA16RD-4P(76)

Ground lug

(Small Flange Type)

2.5

21.5

(Representative example)

No. of

Part No.

HRS No.

Weight

Remarks

contacts

104-0382-2 76

104-0408-4 76

104-0383-5 76

HA16RA-3P(76)

----------

HA16RA-4P(76)

HA16RA-5P(76)

ｇ

HA16RA-3P(76)

Receptacle (Solder Type)

(Inside Mount Type)

Ground lug

19.5

21.6

2×M2.6×0.45

25.1

No. of

contacts

HRS No.

Part No.

Weight

Remarks

----------

HA16RM-3P(76)

104-0431-6 76

HA16RM-3P(76)

ｇ

HA Series●Circular Connectors for Audio Equipment

Receptacle (PCB Through Hole Type)

(Inside Mount Type, Straight Dip)

3×Ø0.8

Dip post dia.

1×0.8×0.6(Ground)

Dip post dia.

21.6

2×M2.6×0.45

19.5

22.8

(Representative example)

No. of

Part No.

HRS No.

Weight

Remarks

----------

contacts

HA16RM-3PE(76)

104-0420-0 76

HA16RM-3PE(76)

14ｇ

(Inside Mount Type, Right Angle Dip)

2.54

3×Ø0.8

Dip post dia.

1×0.8×0.6(Ground)

Dip post dia.

19.5

21.6

2×M2.6×0.45

(The above shapes are examples. The left bend type is shown in this ﬁgure.)

No. of

HRS No.

Part No.

Weight

Remarks

contacts

104-0416-2 76 HA16RM-3PB(76)

104-0418-8 76 HA16RM-3PD(76)

23.2

25.8

Dip post down bent

Dip post left bent

HA16RM-3PB(76)

ｇ

Ground lug

Plug-Receptacle (Solder Type)

(Small Flange Type)

2.4

37.2

42.7

(Representative example)

No. of

HRS No.

Part No.

Weight

Remarks

contacts

104-0395-4

104-0403-0

104-0404-3

104-0411-9

104-0427-9

HA16PRH-3S

HA16PRH-4S

HA16PRH-5S

HA16PRK-3S

HA16PRK-4S

Without ground lug

ｇ

HA16PRH-3S HA16PRK-4S

With ground lug

Plug-Receptacle (Solder Type)

(Inside Mount Type)

29.6

21.8

22.8

Ground lug

21.6

31.5

2×M2.6×0.45

5.8

(Representative example)

No. of

Part No.

HRS No.

Weight

Remarks

----------

contacts

HA16PRM-3S(05)

104-0432-9 05

HA16PRM-3S(05)

ｇ

HA Series●Circular Connectors for Audio Equipment

(Plug-Receptacle PCB Through Hole Type)

3×Ø3（Hole）

33.8

24.8

2.4

ＰＵＳＨ

２

１

２

１

２

１

２

１

３

Convex Portion Height 0.5

1×Ø2.6（Hole）

1×2.6×3.2（Side face hole）

No. of

contacts

HRS No.

Part No.

Weight

Remarks

HA16PRN-3SE-A(71)

104-0441-0 71 HA16PRN-3SE-A(71)

68ｇｒ 4 chain type

Dip post down bent type

Panel Cutout

Receptacle

(Middle Flange Type)

(Large Flange Type)

Ø2.8

2×Ø3.2

(Small Flange Type)

HA16RM

2×Ø2.8

15.6

Plug Receptacle Type

(Small Flange Type)

(Inside Mount Type)

2×Ø2.8

15.6

HA16PRM

HA Series●Circular Connectors for Audio Equipment

Panel Cutout

Gang Type

(Plug-Receptacle)

4×8

Receptacle Dip Post Layout

(The figure below shows the board surface in which connector terminal dip posts are to be inserted.)

Dip post down bent type

HA16RM-3PB(76)

Dip post left bent type

HA16RM-3PD(76)

Dip post straight type

(As viewed from the mating surface)

HA16RM-3PE(76)

1×Ø1.3

1×Ø1.3(Ground)

（Ground）

3×Ø1

4.06

2×M2.6×0.45

1×Ø1.3(Ground)

4.06

3.96

4.45

3×Ø1

4.06

Plug-Receptacle Dip Post Layout

(The figure below shows the board surface in which connector terminal dip posts are to be inserted.)

Dip post down bent type

HA16PRM-3SB(71)

3×Ø1

4.06

1×Ø1.3

(Ground)

4.06

Dip post straight type

(As viewed from the mating surface)

HA16PRM-3SE(71)

HA16PRN-3SE-A(71)

4×Ø1.3

(Ground)

1×Ø1.3

（Ground）

2×M2.6×0.45

3×Ø1

4.06

Mounting hole

(5 places)

12×Ø1

4.06

HA Series●Circular Connectors for Audio Equipment

Coupling Combination

Female Pin

Male Pin

(Plug)

(Receptacle)

(Jack)

(Plug-Receptacle)

Termination procedure

Plug side (HA16 type, jack side connector follows the same assembly procedure)

Screw

Metal clamper

3mm approx.

Plug shell unit

Body

Cable end(ref.)

3mm

11mm

Operation procedure

1. Please choose a cable of which the outside diameter is 4-6mm.

2. Strip insulation of the cable end in the size as shown above.

3. Solder the cable to plug shell.

4. Crimp cable clamper, which holds cable, with a tool.

5. Fit the P shell unit to the cord tube, and tighten the locking screw with a Torque of 0.3-0.4N-m(3.5-4kg-cm) to complete

the work.

For details, contact our sales or engineering department before using the model HA16 plugs.

Receptacle side

Precautions

If heat shrink tubing is applied to the solder terminating section for

insulation purposes, overheating could reduce the torque of the screw

tightness.

Such overheating may result in loosening and possible loss of the

screw. It is advised to confirm that a minimum torque of at least 0.1 N•m

is obtained after termination.

If a torque of at least 0.1 N•m is not realized, the screw should be

tightened to between 0.3 and 0.4 N•m.

Screw

For details on usage, please contact our Sales or Engineering Department.

HA Series●Circular Connectors for Audio Equipment

Terminal arrangement and major speciﬁcations

Terminal

arrangement

No. of contacts

Withstanding

voltage

AC1,400V a minute

3A(Board dip type)

AC1,400V a minute

Current rating

15A

Insulation

resistance

1,000Mø MIN.

1,000 Mø MIN.

Contact resistance

ø MAX.

10 ø MAX.

ø MAX.

Terminal

arrangement

No. of contacts

Withstanding

voltage

AC1,400V a minute

Current rating

Insulation

resistance

1,000 Mø MIN.

Contact resistance

10 ø MAX.

Note 1. The above ﬁgures show the receptacle as viewed from the mating side.

2. The withstand voltages show test voltages.

3. The insulation resistances show the values at 500V DC.

4. The contact resistance show the values at 1A DC.

HA Series●Circular Connectors for Audio Equipment

MEMO :

HA Series●Circular Connectors for Audio Equipment

USA:

HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS

HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE HIROSE ELECTRIC (U.S.A.), INC. CHICAGO OFFICE

2688 Westhills Court, Simi Valley, CA 93065-6235 3255 Scott Boulevard, Building 7, Suite 101 580 Waters Edge Lane, Suite 205 Lombard IL

Phone : +1-805-522-7958

Fax : +1-805-522-3217

http://www.hirose.com/us/

Santa Clara, CA 95054

Phone : +1-408-253-9640

Fax : +1-408-253-9641

http://www.hirose.com/us/

60148

Phone : +1-630-282-6706

Mail : inquiries@hirose.com

http://www.hirose.com/us/

USA:

THE NETHERLANDS:

GERMANY:

HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE) HIROSE ELECTRIC EUROPE B.V.

37677 Professional Center Drive, Suite #100C Hogehillweg #8 1101 CC Amsterdam Z-O

HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH

Herzog-Carl-Strasse 4 D-73760 Ostfildern

(Scharnhauser Park)

Phone : +49-711-4560-02-1

Fax : +49-711-4560-02-299

http://www.hirose.com/eu/

Livonia, MI 48154

Phone : +31-20-6557460

Fax : +31-20-6557469

http://www.hirose.com/eu/

Phone : +1-734-542-9963

Fax : +1-734-542-9964

http://www.hirose.com/us/

GERMANY:

UNITED KINGDOM:

CHINA:

HIROSE ELECTRIC EUROPE B.V. NUERNBERG OFFICE HIROSE ELECTRIC EUROPE BV (UK BRANCH)

HIROSE ELECTRIC (SHANGHAI) CO., LTD.

1601, Henderson Metropolitan, NO.300, East Nanjing

Road, Huangpu District, Shanghai, China 200001

Phone : +86-21-6391-3355

Muggenhofer Str. 136 90429 Nuernberg

Phone : +49-911 32 68 89 63

Fax : +49-911 32 68 89 69

4 Newton Court, Kelvin Drive, Knowlhill,

Milton Keynes, MK5 8NH

Phone : +44-1908 202050

Fax : +44-1908 202058

http://www.hirose.com/eu/

Fax : +86-21-6391-3335

http://www.hirose.com/eu/

http://www.hirose.com/cn/

CHINA:

HONG KONG:

HIROSE ELECTRIC (SHANGHAI) CO.,LTD. BEIJING BRANCH HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD. HIROSE ELECTRIC HONGKONG TRADING CO., LTD.

A1001, Ocean International Center, Building 56# East 4th Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre, Room 1001, West Wing, Tsim Sha Tsui Centre, 66

Ring Middle Road, ChaoYang District, Beijing, 100025

Phone : +86-10-5165-9332

Fax : +86-10-5908-1381

5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 518008

Phone : +86-755-8207-0851

Fax : +86-755-8207-0873

Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong

Phone : +852-2803-5338

Fax : +852-2591-6560

http://www.hirose.com/cn/

http://www.hirose.com/hk/

TAIWAN:

KOREA:

SINGAPORE:

HIROSE ELECTRIC TAIWAN CO., LTD.

103 8F, No.87, Zhengzhou Rd., Taipei

Phone : +886-2-2555-7377

Fax : +886-2-2555-7350

http://www.hirose.com/cn/

HIROSE KOREA CO., LTD.

HIROSE ELECTRIC SINGAPORE PTE. LTD.

1261-10, Jeoungwhang-Dong, Shihung-City, 10 Anson Road #26-1, International Plaza

Kyunggi-Do 429-450

Phone : +82-31-496-7000,7124

Fax : +82-31-496-7100

http://www.hirose.co.kr/

079903, Singapore

Phone : +65-6324-6113

65-6324-6123

Fax : +

http://www.hirose.com/sg/

INDIA:

MALAYSIA:

HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE HIROSE ELECTRIC SINGAPORE PTE. LTD. (REPRESENTATIVE OFFICE)

Office NO.519, Regus-Green Boulevard, Level5, Tower C, Unit No.03, Ground Floor, Explorer Building International Tech 1-10-07, Suntech @ Penang Cybercity (1164),Lintang

Sec62, Plot B-9A, Block B, Noida, 201301, Uttar Pradesh, India Park Whitefield Road, Bangalore 560066 Karnataka, India

Mayang Pasir 3,11950, Bayan Baru, Penang, Malaysia.

Phone : +604-619-2564

Fax : +604-619-2574

Phone : +91-12-660-8018

Fax : +91-120-4804949

http://www.hirose.com/sg/

Phone : +91-80-4120 1907

Fax : +91-80-4120 9908

http://www.hirose.com/sg/

2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN

TEL: 81-45-620-3526 Fax: 81-45-591-3726

http://www.hirose.com

http://www.hirose-connectors.com

The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.

The contents of this catalog are current as of date of 11/2014. Contents are subject to change without notice for the purpose of improvements.

HA16RA-3P(76) [HRS]

相关型号：

HA16RA-3PF-A

HA16RA-3PH-A

HA16RA-3SF-A

HA16RA-3SH-A

HA16RA-4P

HA16RA-4P(76)

HA16RA-4P(77)

HA16RA-5P

HA16RA-5P(76)

HA16RB-3PF-A

HA16RB-3PH-A

HA16RB-3SF-A