HD-0313M3-FH(40) [HRS]
90 Degree Hybrid Coupler, 225MHz Min, 400MHz Max, MINIATURE, ROHS COMPLIANT PACKAGE-4;型号: | HD-0313M3-FH(40) |
厂家: | HRS |
描述: | 90 Degree Hybrid Coupler, 225MHz Min, 400MHz Max, MINIATURE, ROHS COMPLIANT PACKAGE-4 射频 微波 |
文件: | 总10页 (文件大小:386K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
3 dB 90° Card Couplers
HD-M Series
ꢀFeatures
1.High Performance
The high frequency characteristics feature.
Extremely low loss and a high degree of matching.
2.Power Uniform Distribution and
90° Phase Difference Type
This is a one input, two output (or two input, one
output) power uniform distribution type having a
90° phase difference between the two outputs (or
two inputs).
HD-0053M3-IH(40)
HD-0195M3-DH(40)
HD-0195M3-DH-1(40) HD-0900M3-CH-1(40)
3.Miniature and Lightweight
Corrosion-resistant aluminum is used for the cover
and the Hirose Electric original pattern design,
which uses a stripline triplate method, enables the
couplers to be extremely small and lightweight.
HD-0620M3-EH(40) HD-1700M3-FH(40)
HD-3900M3-BH(40)
HD-0313M3-FH(40)
4.Equipped with Tabs
HD-2100M3-CH(40)
HD-1800M3-CH(40)
HD-3200M3-BH(40)
HD-6150M3-AH(40)
Tabs permit direct mounting to surface circuits.
5.High Power Type
This type can be used with up to 100 W of power.
ꢀProduct Specifications
Frequency range (Note)
Characteristic impedance
Maximum Input Power (Note)
30 to 6400 MHz
50 ohm
50 to 100 W
Operating temperature range
Operating relative humidity
–10ç to +65ç
95% Max.
Ratings
Note: The frequency range and the maximum input power will differ depending on the products.
Item
Standard
Conditions
1.Insulation resistance 500M ohms min
100 V DC
Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm,
2.Vibration
3.Shock
No damage, cracks, or parts dislocation
No damage, cracks, or parts dislocation
2
acceleration of 98 m/s for 2 hours in each of 3 directions
2
Acceleration of 980 m/s , sine half-wave waveform,
3 cycles in each of the 3 axis
Temperature : –55ç ꢀ +5ç to +35ç ꢀ +85ç ꢀ +5ç to +35ç
Time : 30 ꢀ 15 max. ꢀ 30 ꢀ 15 max. (Minutes)
5 cycles
4.Temperature cycle No damage, cracks, or parts dislocation
5.Corrosion resistance No serious corrosion
6.Hydrogen sulfide gas No serious corrosion
The test method conforms to MIL-STD-202.
Exposed to 20% salt water solution for 48 hours
Exposed to 10% potassium sulfide solution for 100 hours
ꢀ
ꢀMaterials
Material
Finish
Part
Cover (A)
Cover (B)
Board
---------
Stainless steel
Aluminum
Conductive white Alumite
Gold plating
---------
Dielectric
Rivets
Aluminum
Eyelet
Brass
Nickel plating
Gold plating
---------
Tabs
Phosphor bronze
Stainless steel
Stainless steel
Cover (A)
Cover (B)
---------
25
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
HD-M Seriesꢀ3 dB 90° Card Couplers
ꢀOrdering Information
( )
HD 0195M 3 - D H - 1 40
-
1
2
3
4
5
6
7
Series Name: HD (Directional Couplers)
Coupling
3:3dB
Form
1
2
3
4
5
6
7
H:H Type
Suffix
Center Frequency(MHz)
Examples
Frequency Relative Bandwidth
C:From 10% to below 15%
D:From 15% to below 20%
E:From 20% to below 25%
F:From 25% to below 30%
G:From 30% to below 35%
(
)
0053M: 53MHz
0300M: 300MHz
6150M:6150MHz
40 :
RoHS Compliant
ꢀSpecifications
Frequency
Range
(MHz)
Frequency
Sensitivity
Coupling
(dB)
IsoIation V.S.W.R.
Weight
(g)
Power
(W)
Part Number
Fig
RoHS
(dB Min)
15
(Max)
1.40
(dB)
0.75
3+0.35
(
)
HD-0053M3-IH 40
30~76
45~85
22
25
100
1
2
0
3+0.35
(
)
)
HD-0070M3-GH 40
0.5
0.5
0.8
0.5
0.5
0.5
0.5
0.5
0.3
0.5
0.6
20
20
20
20
20
20
20
20
20
20
19
1.20
1.20
1.20
1.20
1.20
1.20
1.20
1.20
1.20
1.20
1.20
50
100
100
100
100
100
100
100
100
100
100
0
3+0.35
(
HD-0125M3-GH 40
80~160
90~220
160~230
160~230
225~400
225~400
225~400
360~470
470~770
470~880
22
23
22
11
10
9
2
2
2
1
2
1
3
2
2
2
0
3+0.35
(
)
HD-0155M3-IH 40
0
3+0.35
(
)
HD-0195M3-DH 40
0
3+0.35
(
)
HD-0195M3-DH-1 40
0
YES
HD-0300M3-FH 40
3+0.35
(
)
0
HD-0300M3-FH-1 40
3+0.35
(
)
0
HD-0313M3-FH 40
3+0.35
6
(
)
0
(
)
3+0.35
HD-0430M3-CH 40
0
10
6
(
)
3+0.35
HD-0620M3-EH 40
0
(
)
3+0.35
HD-0660M3-GH 40
0
6
26
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
HD-M Seriesꢀ3 dB 90° Card Couplers
ꢀSpecifications
Frequency
Range.
(MHz)
Frequency
Sensitivity
(dB)
Coupling
(dB)
Isolation V.S.W.R.
Weight
(g)
Power
(W)
Part Number
Fig.
RoHS
(dB Min)
(Max)
3+0.35
0.6
0.5
0.5
0.3
0.3
0.3
0.6
0.5
0.3
0.3
0.3
0.5
0.3
0.3
0.5
0.5
20
1.20
6
100
100
100
100
100
100
100
50
1
2
1
2
1
3
4
5
6
6
6
8
6
6
7
7
(
)
HD-0660M3-GH-1 40
440~880
500~900
0
3+0.35
(
)
HD-0700M3-FH 40
20
20
20
20
20
20
20
20
20
20
20
21
18
18
18
1.20
1.20
1.20
1.20
1.20
1.25
1.20
1.20
1.20
1.20
1.20
1.25
1.30
1.30
1.30
6
5
6
6
6
4
5
3
3
3
3
3
3
7
7
0
3+0.35
(
)
HD-0750M3-GH 40
500~1,000
800~1,000
800~1,000
800~1,000
1,000~2,000
1,200~2,200
1,600~2,000
1,700~2,100
1,900~2,300
2,200~2,600
2,300~2,700
3,000~3,400
3,600~4,200
5,900~6,400
0
3+0.35
(
)
HD-0900M3-CH 40
0
3+0.35
(
)
)
0
HD-0900M3-CH-1 40
3+0.35
(
0
HD-0900M3-CH-2 40
3+0.35
(
)
0
HD-1500M3-GH 40
3+0.35
(
)
0
HD-1700M3-FH 40
YES
0.35
0
3+
(
)
)
)
HD-1800M3-CH 40
50
3+0.35
(
0
HD-1900M3-CH 40
50
3+0.35
(
0
HD-2100M3-CH 40
50
3+0.45
0
(
)
)
)
)
)
HD-2400M3-BH 40
100
100
100
100
100
3+0.45
0
(
HD-2500M3-BH 40
3+0.45
0
(
HD-3200M3-BH 40
3+0.45
0
(
HD-3900M3-BH 40
3+0.45
0
(
HD-6150M3-AH 40
ꢀThere is a 90° phase difference between the output and the coupling.
ꢀThe V.S.W.R. has a common standard for both the primary line and the secondary line.
27
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
HD-M Seriesꢀ3 dB 90° Card Couplers
ꢀExternal Dimensions
Dimensions of Mounting Holes
Fig.1
A
H
Part Number
B
C
D
E
F
G
I
(
)
HD-0053M3-IH 40
28.0
17.3
12.7
7.9
44.5
26.9
21.8
17.8
16.8
17.0
53.3
36.3
31.8
25.4
25.4
25.5
50.8
38.1
31.8
25.4
22.2
22.5
44.5
31.8
25.4
19.1
15.9
15.9
3.2
2.9
3.1
3.1
3.2
3.4
28.0
17.3
12.7
7.9
44.5
31.8
25.4
19.1
15.9
15.9
3.6
3.3
3.5
3.5
3.6
3.8
(
)
HD-0195M3-DH-1 40
(
)
HD-0300M3-FH-1 40
(
)
HD-0660M3-GH-1 40
(
)
HD-0750M3-GH 40
8.0
8.0
(
)
HD-0900M3-CH-1 40
8.0
8.0
Dimensions of Mounting Holes
Fig.2
Part Number
A
B
C
D
E
F
G
H
(
)
HD-0900M3-CH 40
8.0
17.0
17.0
21.8
21.8
37.1
37.1
37.1
44.5
17.0
17.0
25.5
25.5
32.0
32.0
46.1
46.1
46.1
53.5
25.5
25.5
22.5
22.5
32.0
32.0
51.0
51.0
51.0
51.0
22.5
22.5
15.9
15.9
25.4
25.4
44.5
44.5
44.5
44.5
15.9
15.9
3.0
3.1
3.0
3.2
3.0
3.4
3.2
3.2
3.3
3.1
8.0
15.9
15.9
25.4
25.4
44.5
44.5
44.5
44.5
15.9
15.9
(
)
HD-0620M3-EH 40
8.0
12.8
12.8
28.0
28.0
28.0
28.0
8.0
8.0
(
)
HD-0430M3-CH 40
12.8
12.8
28.0
28.0
28.0
28.0
8.0
(
)
HD-0300M3-FH 40
(
)
HD-0195M3-DH 40
(
)
HD-0155M3-I H 40
(
)
)
)
HD-0125M3-GH 40
(
HD-0070M3-GH 40
(
HD-0660M3-GH 40
(
)
HD-0700M3-FH 40
8.0
8.0
28
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
HD-M Seriesꢀ3 dB 90° Card Couplers
Dimensions of Mounting Holes
Fig.3
Part Number
A
B
C
D
E
F
G
H
I
(
)
HD-0313M3-FH 40
6.4
6.4
3.2
3.2
38.1
38.1
6.4
6.4
3.6
3.6
38.1
38.1
45.7
45.7
50.8
50.8
12.7
12.7
(
)
HD-0900M3-CH-2 40
Dimensions of Mounting Holes
Fig.4
Part Number
E
C
D
F
A
B
G
(
)
HD-1500M3-GH 40
14.0
26.7
34.3
12.7
3.2
14.0
3.6
Dimensions of Mounting Holes
Fig.5
F
A
E
G
B
C
D
Part Number
(
)
HD-1700M3-FH 40
10.35
11.7
20.7
20.7
14.3
3.3
14.3
29
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
HD-M Seriesꢀ3 dB 90° Card Couplers
Dimensions of Mounting Holes
Fig.6
Part Number
A
B
C
D
E
F
(
)
)
)
HD-2100M3-CH 40
40.2
40.2
40.2
25.1
40.2
26.8
26.8
26.8
15.1
26.8
46.6
46.6
46.6
31.1
46.6
10.0
10.0
10.0
10.0
10.0
2.8
2.8
2.8
3.3
3.1
40.2
40.2
40.2
25.1
40.2
(
HD-1900M3-CH 40
(
HD-1800M3-CH 40
(
)
)
HD-3200M3-BH 40
(
HD-2500M3-BH 40
Dimensions of Mounting Holes
Fig.7
Part Number
A
B
C
D
E
F
G
H
(
)
HD-3900M3-BH 40
17
17
22
22
42
42
15
15
8.5
8.5
3.2
3.2
17
17
8.5
8.5
(
)
HD-6150M3-AH 40
Dimensions of Mounting Holes
(
)
HD-2400M3-BH 40
Fig.8
30
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
HD-M Seriesꢀ3 dB 90° Card Couplers
ꢀTypical Data
(
40
)
(
40
)
(
40
)
Temperature Test Data
)>
<
(
HD-1800M3-CH 40
Low Temperature (-10ç)
Normal Temperature (+20ç)
High Temperature (+65ç)
31
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
HD-M Seriesꢀ3 dB 90° Card Couplers
ꢀMounting Method
The three types of mounting methods
illustrated in the diagrams below will
mount the card coupler for use under
optimum conditions.
Fastening screw
Tab
The fastening screws in the diagrams
are M2 screws tightened to 1.5 kg • cm.
When the tip of the micro stripline is of
fluoropolymer material ( r = 2.6), C
chamfering of C1 is performed at t1.6,
and of C0.5 at t1.2.
The side view diagrams of Figure 1 are
illustrated in Figures 2, 3, and 4 below.
Gap S between the card coupler and
the microstrip board surface should be
used to agree with the following
conditions.
Micro stripline
........
Below 500 MHz
500 to 2300 MHz
Above 2300 MHz
S≤0.5 mm
S≤0.25 mm
S≤0.15 mm
......
......
(
Microstrip board
Figure 1.
Metal plate or conductive spacer
Figure 2.
Figure 3.
Figure 4.
ꢀWhen the Ground Board is Constructed of 0.4 mm Stainless and 0.8 mm Aluminum
(When the Thickness of the Microstrip Board is 1.6 or 1.2 mm)
For t1.6 boards, use with the stainless case of the card coupler facing upward. For t1.2 boards,
use with the aluminum case of the card coupler facing upward. Mount and fix the card coupler
with fastening screws as illustrated in Figure 2. Next, solder the tabs and micro stripline, then
use.
(When the Thickness of the Microstrip Board is Greater than 1.6 mm)
Insert a metal plate or a conductive spacer between the coupler and ground, then mount as
illustrated in Figure 3 so that the surface of the tabs and the position of the microstrip board are
equal. Fix the card coupler with fastening screws as illustrated in Figure 3. Next, solder the tabs
and micro stripline, then use.
(When the Thickness of the Microstrip Board is Less than 1.2 mm)
Cut the ground at the position of the coupler and attach so that the surface of the tabs is in
contact with the micro stripline. Fix the card coupler with fastening screws as illustrated in Figure
4. Next, solder the tabs and micro stripline, then use.
32
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
HD-M Seriesꢀ3 dB 90° Card Couplers
For VE Items (in which Aluminum Is Used Above and Below the Ground Board and the
Eyelets Protrude Beyond the Cover)
The height of the cover will be a value 0.1 mm less than one half of the overall thickness.
For Directional Card Couplers (HD-0900M (10 dB) and HD-0900M (20 dB),etc.)
The height of the cover will be a value 0.35 mm less than one half of the overall thickness.
(When Spacing H of the Micro Stripline Board and the Tabs is 0 ≤ H ≤ 0.3 mm)
Fix the card coupler with fastening screws as illustrated in Figure 2.
Next, solder the tabs and micro stripline, then use.
(When Spacing H of the Micro Stripline Board and the Tabs is H < 0)
Insert a metal plate or a conductive spacer between the coupler and ground, then mount as
illustrated in Figure 3 so that the surface of the tabs and the position of the microstrip board are
equal. Fix the card coupler with fastening screws as illustrated in Figure 3. Next, solder the tabs
and micro stripline, then use.
(When Spacing H of the Micro Stripline Board and the Tabs is H > 0.3 mm)
Cut the ground at the position of the coupler and attach so that the surface of the tabs is in
contact with the micro stripline. Fix the card coupler with fastening screws as illustrated in Figure
4. Next, solder the tabs and micro stripline, then use.
At the time of soldering, solder with a space of 1 mm from the edge of the micro
stripline as illustrated in Figure 5.
Soldering portion
Micro stripline board
Figure 5.
33
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
HD-M Seriesꢀ3 dB 90° Card Couplers
:
NOTES
34
相关型号:
HD-0660M3-GH-1(40)
90 Degree Hybrid Coupler, 440MHz Min, 880MHz Max, MINIATURE, ROHS COMPLIANT PACKAGE-4
HRS
©2020 ICPDF网 联系我们和版权申明