HDH-03020GID(40) [HRS]
Directional Coupler,;
| 型号： | HDH-03020GID(40) |
| 厂家： | 
HRS |
| 描述： | Directional Coupler, 射频 微波 |
| 文件： | 总8页 (文件大小：509K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Couplers with Connectors (H Type)
HDH Series
ꢀFeatures
1.High Performance
The high frequency characteristics feature
extremely low loss, a high degree of matching, and
high isolation.
2.Power Uniform Distribution and
HDH-00803GHD(40)
HDH-01503GHD(40)
90˚Phase Difference Type
This is a one input, two output (or two input, one
output) power uniform distribution type having a
90˚phase difference between the two outputs (or
two inputs).
HDH-01503GH(40)
HDH-03003GHD(40)
3.Miniature and Lightweight
Corrosion-resistant aluminum is used for the case
and the Hirose Electric original pattern design,
which uses a stripline triplate method, enables the
couplers to be miniature and lightweight.
4.Couplers with SMA Connectors
Use of SMA connectors (Hirose Electric HRM
Series) which feature stainless steel for the exterior
cladding make these couplers durable.
HDH-09003GHD(40)
HDH-12803CHD(40)
HDH-06003GHD(40)
ꢀProduct Specifications
Frequency range (Note)
Characteristic impedance
Maximum Input Power (Note)
0.5 to 14.5 GHz
Operating temperature range
Operating relative humidity
-10ç to +65ç
95% Max.
50 ohm
2 to 50 W
Ratings
Note: The frequency range and the maximum input power will differ depending on the products.
Item
1.Vibration
Standard
Conditions
Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm,
2
acceleration of 98 m/s for 2 hours in each of 3 directions
No electrical discontinuity of 1 µs or more
No damage, cracks, or parts dislocation
2
Acceleration of 490 m/s , sine half-wave waveform,
2.Shock
3 cycles in each of the 3 axis
Temperature : _55ç
ꢀ +15ç to +35ç ꢀ +85ç ꢀ +15ç to +35ç
3.Temperature cycle No damage, cracks, or parts dislocation
Time : 30 ꢀ 15 max. ꢀ 30 ꢀ 15 max. (Minutes)
5 cycles
The test method conforms to MIL-STD-202.
ꢀ
ꢀMaterials
Material
Finish
Part
Connector Body
Stainless steel
Beryllium copper
PTFE
Passivated
Gold plating
---------
Connector female contacts
Connector Insulator
Case
Coating
Aluminum
Board
Dielectric
Gold plating
14
04/2009
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
HDH SeriesꢀCouplers with Connectors (H Type)
ꢀOrdering Information
HD H - 008 03 G H D (40)
1
2
3
4
5
6
7
8
Series Name: HD (Directional Couplers)
Coupling
4
1
2
3
03:3dB
Type of Connector
H: Indicates the HRM (SMA) Series
Center Frequency
008: 0.75GHz
015: 1.5GHz
Frequency Relative Bandwidth
B:From 5% to below 10%
C:From 10% to below 15%
D:From 15% to below 20%
G:From 30% to below 35%
Form
5
017: 1.7GHz
6
7
8
020: 2.0GHz
H:H Type
030: 3.0GHz
D:With Termination
040: 4.0GHz
060: 6.0GHz
(40):RoHS Compliant
090: 9.0GHz
128:12.8GHz
ꢀSpecifications
Frequency
Range
(GHz)
Primary Line Secondary Line
V.S.W.R. V.S.W.R.
Coupling Frequency Directivity
Weight
(g)
Power
(W)
Part Number
RoHS
(dB)
Sensitivity (dB Min)
(Max)
1.15
(Max)
1.15
+0.2
HDH-00803GHD(40)
HDH-01503GH(40)
HDH-01503GHD(40)
HDH-01703CH(40)
HDH-01703CHD(40)
HDH-02003DHD(40)
HDH-03003GHD(40)
HDH-04003BH(40)
HDH-06003GHD(40)
HDH-09003GHD(40)
HDH-12803CHD(40)
0.5~1.0
1.0~2.0
1.0~2.0
1.5~1.9
1.5~1.9
1.7~2.3
2.0~4.0
3.7~4.2
4.0~7.8
8.0~11.0
10.5~14.5
3
±0.5
±0.5
±0.5
±0.3
±0.3
±0.3
±0.5
±0.3
±0.5
±0.5
±0.5
20
20
20
20
20
18
18
20
17
15
12
49
34
34
34
34
34
25
23
23
31
31
2
50
2
0
+0.2
0
3
1.20
1.20
1.20
1.20
1.20
1.20
1.20
1.25
1.30
1.40
1.20
1.20
1.20
1.20
1.20
1.20
1.20
1.25
1.30
1.40
+0.2
0
3
+0.2
0
3
50
2
+0.2
0
3
+0.2
0
YES
3
2
+0.2
0
3
2
+0.2
0
3
50
2
+0.3
0
3
+0.3
0
3
2
+0.6
0
3
2
Directivity have had the coupling (nominal value of 3 dB) subtracted.
ꢀ
ꢀ
There is a phase difference of 90°between the output and the coupling.
04/201095
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
HDH SeriesꢀCouplers with Connectors (H Type)
ꢀExternal Dimensions
(
(
)
40
)
40
(
)
40
(
(
(
)
)
)
40
40
40
(
)
40
(
)
40
(
)
40
(
)
40
(
)
40
16
04/2009
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
HDH SeriesꢀCouplers with Connectors (H Type)
ꢀTypical Data
(40)
(40)
04/201097
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Couplers with Connectors (I Type)
HDH Series
ꢀFeatures
1.High Performance
The high frequency characteristics feature.
Extremely high degree of matching, and high
isolation.
HDH-00810GID(40)
HDH-01510GID(40)
HDH-03020GID(40)
HDH-12806CID(40)
2.Miniature and Lightweight
Corrosion-resistant aluminum is used for the case
and the Hirose Electric original pattern design,
which uses a stripline triplate method, enables the
couplers to be miniature and lightweight.
3.Couplers with SMA Connectors
Use of SMA connectors (Hirose Electric HRM
Series) which feature stainless steel for the exterior
cladding make these couplers durable.
HDH-02249AI(40)
4.Full Coupling Variations
Full variations of coupling over 6 dB are available.
HDH-06020GID(40)
HDH-09010GID(40)
ꢀProduct Specifications
Frequency range (Note)
Characteristic impedance
Maximum Input Power (Note)
0.5 to 14.5 GHz
Operating temperature range
Operating relative humidity
-10ç to +65ç
95% Max.
50 ohm
4 to 50 W
Ratings
Note: The frequency range and the maximum input power will differ depending on the products.
Item
1.Vibration
Standard
Conditions
Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm,
2
No electrical discontinuity of 1µs or more
No damage, cracks, or parts dislocation
acceleration of 98 m/s for 2 hours in each of 3 directions
2
Acceleration of 980 m/s , sine half-wave waveform,
2.Shock
3 cycles in each of the 3 axis
Temperature : _55ç
ꢀ +15ç to +35ç ꢀ +85ç ꢀ +15ç to +35ç
3.Temperature cycle No damage, cracks, or parts dislocation
The test method conforms to MIL-STD-202.
Time : 30 ꢀ 15 max. ꢀ 30 ꢀ 15 max. (Minutes)
5 cycles
ꢀ
ꢀMaterials
Material
Finish
Part
Connector Body
Stainless steel
Beryllium copper
PTFE
Passivated
Gold plating
---------
Connector female contacts
Connector Insulator
Case
Coating
Aluminum
Board
Dielectric
Gold plating
18
04/2009
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
HDH SeriesꢀCouplers with Connectors (I Type)
ꢀOrdering Information
HD H - 008 10 G I D (40)
1
2
3
4
5
6
7
8
Series Name: HD (Directional Couplers)
Coupling
4
1
2
06 : 6dB
10 : 10dB
20 : 20dB
30 : 30dB
37 : 37dB
49 : 49dB
Type of Connector
H: Indicates the HRM (SMA) Series
3 Center Frequency
008 : 0.8GHz
009 : 0.9GHz
015 : 1.5GHz
017 : 1.7GHz
022 : 2.2GHz
030 : 3.0GHz
060 : 6.0GHz
090 : 9.0GHz
128 : 12.8GHz
Frequency Relative Bandwidth
C: From 10% to below 15%
G: From 30% to below 35%
5
Form
I: I Type, H: H Type
6
7
D: With Termination
Isolation port with termination is designated
as D at the end of each part No.
(40): RoHS Compliant
8
ꢀSpecifications
Secondary
Line
V.S.W.R.
(MAX)
Frequency
Frequency Insertion
Primary Line
V.S.W.R.
(MAX)
Coupling
(dB)
Directivity
(dB MIN)
Weight
(g)
Power
(W)
Part Number
Range
(GHz)
Sensitivity
(dB)
Loss
(dB MAX)
RoHS
HDH-0810GID(40)
0.5~1.0 10±1.0
±0.75
±0.75
±0.50
±0.75
±0.75
±0.25
±0.30
±0.30
±0.30
±0.40
±0.40
±0.25
±0.25
±0.25
±0.75
±0.75
±0.75
±0.75
±0.75
±0.75
±0.75
±0.50
0.3
0.3
0.3
0.4
0.4
0.5
0.5
0.4
0.4
0.4
0.4
20
18
20
20
18
20
20
18
20
20
18
18
16
15
18
18
17
17
15
15
13
15
15
15
1.15
1.15
1.20
1.20
1.20
1.20
1.20
1.20
1.20
1.20
1.20
1.20
1.20
1.20
1.20
1.20
1.25
1.25
1.30
1.30
1.30
1.30
1.30
1.30
1.15
1.15
1.20
1.20
1.20
1.20
1.20
1.20
1.20
1.20
1.20
1.20
1.20
1.20
1.20
1.20
1.25
1.25
1.30
1.30
1.30
1.35
1.35
1.35
49
50
50
34
34
34
34
34
34
34
34
42
42
42
25
25
23
23
24
24
24
28
28
28
10
50
50
10
50
50
50
05
10
50
50
50
50
50
10
50
10
50
04
10
10
04
10
50
HDH-00820GID(40) 0.5~1.0 20±1.0
HDH-00937CI(41)
0.8~1.0 37±1.0
HDH-01510GID(40) 1.0~2.0 10±1.2
HDH-01520GID(40) 1.0~2.0 20±1.2
+1.0
HDH-01530CI(40)
HDH-01537CI(40)
1.4~1.6
1.4~1.6
30_2.0
+1.0
37_1.5
HDH-01706CID(40) 1.5~1.9
6±1.0
HDH-01710CID(40) 1.5~1.9 10±1.2
HDH-01720CID(40) 1.5~1.9 20±1.2
HDH-01730CID(40) 1.5~1.9 30±1.5
π
HDH-02210AI(40)
HDH-02220AID(40) 2.11~2.2 20±1.0
HDH-02249AI(40)
2.11~2.2 49±1.0
2.11~2.2 10±1.0
0.8
YES
0.3
0.3
0.5
0.5
0.5
0.5
0.5
0.5
0.5
HDH-03010GID(40) 2.0~4.0 10±1.2
HDH-03020GID(40) 2.0~4.0 20±1.2
HDH-06010GID(40) 4.0~7.8 10±1.2
HDH-06020GID(40) 4.0~7.8 20±1.2
HDH-09006GID(40) 8.0~11.0
6±1.2
HDH-09010GID(40) 8.0~11.0 10±1.2
HDH-09020GID(40) 8.0~11.0 20±2.0
HDH-12806CID(40) 10.5~14.5 6±1.0
π
2.1
π
HDH-12810CID(40) 10.5~14.5 10±1.25 ±0.50
HDH-12820CID(40) 10.5~14.5 20±1.25 ±0.50
1.1
0.6
ꢀThe coupling loss component is not included in the insertion loss (unless the item is marked with an π symbol)
04/201099
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
HDH SeriesꢀCouplers with Connectors (I Type)
ꢀExternal Dimensions
(40)
(40)
(41)
(40)
(40)
(40)
(40)
(40)
(40)
(40)
(40)
(40)
(40)
(40)
(40)
(40)
20
04/2009
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
HDH SeriesꢀCouplers with Connectors (I Type)
ꢀTypical Data
HDH-01510GID(40)
HDH-01530CI(40)
HDH-01537CI(40)
HDH-03020GID(40)
HDH-09010GID(40)
04/202091
相关型号：
©2020 ICPDF网 联系我们和版权申明