HIF3BA-20D-2.54R-CL
更新时间:2024-09-18 18:52:32
品牌:HRS
描述:Board Connector, 20 Contact(s), 2 Row(s), Female, IDC Terminal, Socket
HIF3BA-20D-2.54R-CL 概述
Board Connector, 20 Contact(s), 2 Row(s), Female, IDC Terminal, Socket 集管和边缘连接器
HIF3BA-20D-2.54R-CL 规格参数
是否Rohs认证: | 不符合 | 生命周期: | Obsolete |
Reach Compliance Code: | unknown | 风险等级: | 5.84 |
主体/外壳类型: | SOCKET | 连接器类型: | BOARD CONNECTOR |
联系完成终止: | GOLD | 触点性别: | FEMALE |
DIN 符合性: | NO | 滤波功能: | NO |
IEC 符合性: | NO | JESD-609代码: | e4 |
MIL 符合性: | NO | 插接信息: | MULTIPLE MATING PARTS AVAILABLE |
混合触点: | NO | 安装类型: | CABLE |
装载的行数: | 2 | 选件: | GENERAL PURPOSE |
端接类型: | IDC | 触点总数: | 20 |
UL 易燃性代码: | 94V-0 | Base Number Matches: | 1 |
HIF3BA-20D-2.54R-CL 数据手册
通过下载HIF3BA-20D-2.54R-CL数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载Ribbon Cable connector Compliant with MIL Standard
HIF3B Series
■Features
1. Product Compliant with MIL Standard
HIF3B series has been developed as a product compliant with MIL
standard, and used for wide applications.
2. UL Approval Product
HIF3B series connectors are UL approved.
3. Mechanism to Prevent Mis-insertion
This connector is equipped with the mechanism to prevent Mis-
insertion as follows.
1 The system provides the convex area to insert the guide-key on the
pin header side, and to guide it in combination with the socket
convex area (MIL standard).
2
The system embeds and guides the polarizing key in the socket holes.
4. Applicable Cable AWG#28
The applicable cable is UL2651 AWG#28 flat cable (7 cores./
0.127mm, jacket dia. 0.9 0.1mm).
■Product Specifications
(
)
(
)
Current rating : 1A
Operating Temperature Range
:
–55 to +85ç Note 1 Storage Temperature Range : –10 to +60ç Note 2
Rating
(
)
Voltage rating : 200V AC Operating Moisture Range : 40 to 80%
Storage Humidity Range : 40 to 70% Note 2
Item
Specification
Condition
1. Insulation Resistance 1000M ohms min.
500V DC
2. Withstanding voltage No flashover or insulation breakdown.
650V AC/1 minute
0.1A
3. Contact Resistance
4. Vibration
15m ohms max.
No electrical discontinuity of 1µs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
96 hours at temperature of 40ç and humidity of 90% to 95%
(-65ç: 30 minutes ■■15 to 35ç: 5 minutes max.
125ç: 30 minutes ■ 15 to 35ç: 5 minutes max.) 5 cycles
500 cycles
5. Humidity (Steady state) Insulation resistance: 1000M ohms min.
6. Temperature Cycle
7. Operating Life
No damage, cracks, or parts looseness.
Contact resistance: 15m ohms max.
Flow: 260ç for 10 seconds
8. Resistance to Soldering heat No deformation of components affecting performance.
Manual soldering: 300ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
■Material
Part
Material
PBT
Finish
Black
Remarks
UL94V-0
Insulator
Connection area
Connection area
Connection area
Connection area
Gold plating
Gold plating
Gold plating
Solder plating
D
Beryllium copper
Socket Contact
–––––––
–––––––
DA
Copper alloy
Brass
Pin header contact
Selective gold plating
B15
■Ordering Information
■Socket
HIF 3B - * D A - 2.54 R
q
w
e
r
t
y
u
q Series Name
w Series No.
: HIF
: 3B, 3BA, 3BB 50, 60, 64 contacts only
(
)
e
r
t
Number of contacts : 16, 20, 26, 30, 34, 40, 50, 60, 64
Contact alignment : D : Double
A
: VA type
: 2.54mm
y Contact pitch
u Connection type
R : ID type
■Pin Header
HIF 3B - * P A - 2.54 DS
q
w
e
r
t
y
u
q Series Name : HIF
w Series No.
3B
:
:
(14 contacts not included) 3BC: (10 contacts only)
3BA, 3BB: (50, 60, 64 contacts only) 3BD: (10 contacts only)
Number of contacts : 16, 20, 26, 30, 34, 40, 50, 60, 64
e
r
t
P
A
: Pin header
: Selective gold plating
y Contact pitch : 2.54mm
u Contact style
DS
: Right angle type
: Straight type
DSA
B16
■Socket (With guide to prevent mis-insertion)
Body
Protector
Clamp
Note1, Note2: The number of polarizing keys and polarizing keyways changes according to products. Refer to the list as shown below.
Note3: The 50, 60 and 64 contact connector contain two types of polarizing guides. Use the products, referring to Notes 1 and 2.
Note4: The 6 contact has no polarizing mark.
Unit:mm
Polarizing Guide
(Note 1)
Polarizing Keyway
(Note 2)
Part Number
CL No.
Part Number
–––––––
CL No.
Number of Contacts
A
B
C
D
HIF3BA- 6D-2.54R 610-0032-3
6
12.19 5.08 6.35 7.72
17.27 10.16 11.43 12.8
22.35 15.24 16.51 17.88
24.89 17.78 19.05 20.42
29.97 22.86 24.13 25.5
37.59 30.48 31.75 33.12
42.67 35.56 36.83 38.2
47.75 40.64 41.91 43.28
55.37 48.26 49.53 50.9
68.07 60.96 62.23 63.6
68.07 60.96 62.23 63.6
80.77 73.66 74.93 76.3
80.77 73.66 74.93 76.3
85.85 78.74 80.01 81.38
85.85 78.74 80.01 81.38
None
HIF3BA-10D-2.54R 610-0021-7 HIF3BA-10DA-2.54R 610-0651-5
HIF3BA-14D-2.54R 610-0022-0 HIF3BA-14DA-2.54R 610-0652-8
HIF3BA-16D-2.54R 610-0023-2 HIF3BA-16DA-2.54R 610-0653-0
HIF3BA-20D-2.54R 610-0024-5 HIF3BA-20DA-2.54R 610-0654-3
HIF3BA-26D-2.54R 610-0025-8 HIF3BA-26DA-2.54R 610-0655-6
HIF3BA-30D-2.54R 610-0026-0 HIF3BA-30DA-2.54R 610-0656-9
HIF3BA-34D-2.54R 610-0027-3 HIF3BA-34DA-2.54R 610-0657-1
HIF3BA-40D-2.54R 610-0028-6 HIF3BA-40DA-2.54R 610-0658-4
HIF3BA-50D-2.54R 610-0029-9 HIF3BA-50DA-2.54R 610-0659-7
HIF3BB-50D-2.54R 610-0041-4 HIF3BB-50DA-2.54R 610-0671-2
HIF3BA-60D-2.54R 610-0030-8 HIF3BA-60DA-2.54R 610-0660-6
HIF3BB-60D-2.54R 610-0042-7 HIF3BB-60DA-2.54R 610-0672-5
HIF3BA-64D-2.54R 610-0031-0 HIF3BA-64DA-2.54R 610-0661-9
HIF3BB-64D-2.54R 610-0043-0 HIF3BB-64DA-2.54R 610-0673-8
10
14
16
20
26
30
34
40
50
50
60
60
64
64
One on left side
■
■
■
■
■
■
■
■
■
■
■
■
■
One at center
One on right and
One on right and left sides, resp. left sides, resp.
One at center
One on right and left sides, resp.
One at center
One on right and left sides, resp.
One at center
The products marked with
■ comply with MIL standard.
B17
■Socket with Withdrawal Tab
Unit : mm
A B
Part Number
CL No.
Number of Contacts
HIF3BA-10D-2.54R-CL 610-0190-4
HIF3BA-16D-2.54R-CL 610-0192-0
HIF3BA-20D-2.54R-CL 610-0193-2
HIF3BA-26D-2.54R-CL 610-0194-5
HIF3BA-30D-2.54R-CL 610-0195-8
HIF3BA-34D-2.54R-CL 610-0196-0
HIF3BA-40D-2.54R-CL 610-0197-3
HIF3BA-50D-2.54R-CL 610-0198-6
HIF3BB-50D-2.54R-CL 610-0201-9
HIF3BA-60D-2.54R-CL 610-0199-9
HIF3BB-60D-2.54R-CL 610-0202-1
HIF3BA-64D-2.54R-CL 610-0200-6
HIF3BB-64D-2.54R-CL 610-0203-4
10
16
20
26
30
34
40
17.27
5.3
24.89 12.9
29.97 18.0
37.59 25.5
42.67 30.5
47.75 35.8
55.37 43.4
50
60
64
68.07 56.0
80.77 68.5
85.85 73.8
B18
■Socket
Body
Protector
Clamp
Note1: The number of polarizing keys and polarizing keyways changes according to products. For details, refer to the list as shown below.
Note2: The 6 contact has no polarizing mark.
Unit:mm
Polarizing Guide
Part Number
CL No.
Number of Contacts
A
B
C
D
(Note 1)
HIF3B- 6D-2.54R 610-0012-6
HIF3B-10D-2.54R 610-0001-0
HIF3B-14D-2.54R 610-0002-2
HIF3B-16D-2.54R 610-0003-5
HIF3B-20D-2.54R 610-0004-8
HIF3B-26D-2.54R 610-0005-0
HIF3B-30D-2.54R 610-0006-3
HIF3B-34D-2.54R 610-0007-6
HIF3B-40D-2.54R 610-0008-9
HIF3B-50D-2.54R 610-0009-1
HIF3B-60D-2.54R 610-0010-0
HIF3B-64D-2.54R 610-0011-3
6
12.19 5.08 6.35 7.72
17.27 10.16 11.43 12.80
22.35 15.24 16.51 17.88
24.89 17.78 19.05 20.42
29.97 22.86 24.13 25.50
37.59 30.48 31.75 33.12
42.67 35.56 36.83 38.2
47.75 40.64 41.91 43.28
55.37 48.26 49.53 50.90
68.07 60.96 62.23 63.6
80.77 73.66 74.93 76.3
85.85 78.74 80.01 81.38
None
■
■
■
■
■
■
■
■
■
■
■
10
14
16
20
26
30
34
40
50
60
64
One on left side
One on right and
left sides, resp.
The products marked with
■ comply with MIL standard.
B19
■Four Wall Angle Dip
BPCB mounting pattern
Note 1, Note 2: The number of polarizing slot and key installed positions
changes according to products. Refer to the list as shown below.
Note 3: The spacer moves to the right according to the number of
contacts.
Note 4: The 10, 50, 60 and 64 contact connectors contain two types of
polarizing slots.
n=number of contacts
■
Use products, referring to (Note 1) (Note 2).
Unit:mm
Polarizing Slot
(Note 1)
Polarizing Key Install
(Note 2)
Part Number
CL No.
Number of Contacts
A
B
C
D
E
F
28.14
MAX51.1
28.14
MAX51.1
33.24
MAX56.2
35.74
MAX58.7
40.84
MAX63.8
48.44
MAX71.4
53.54
MAX76.5
58.64
MAX81.6
66.24
MAX89.2
78.94
MAX101.9
78.94
MAX101.9
91.64
MAX114.6
91.64
MAX114.6
96.74
MAX119.7
96.74
■
HIF3BA-10PA-2.54DS 610-0091-2
HIF3BD-10PA-2.54DS 610-0171-0
HIF3BA-14PA-2.54DS 610-0092-5
HIF3BA-16PA-2.54DS 610-0093-8
HIF3BA-20PA-2.54DS 610-0094-0
HIF3BA-26PA-2.54DS 610-0095-3
HIF3BA-30PA-2.54DS 610-0096-6
HIF3BA-34PA-2.54DS 610-0097-9
HIF3BA-40PA-2.54DS 610-0098-1
HIF3BA-50PA-2.54DS 610-0099-4
HIF3BB-50PA-2.54DS 610-0131-5
HIF3BA-60PA-2.54DS 610-0100-1
HIF3BB-60PA-2.54DS 610-0132-8
HIF3BA-64PA-2.54DS 610-0101-4
HIF3BB-64PA-2.54DS 610-0133-0
10
10
14
16
20
26
30
34
40
50
50
60
60
64
64
32.0 17.5 10.16
32.0 17.5 10.16
37.1 22.6 15.24
39.6 25.1 17.78
44.7 30.2 22.86
52.3 37.8 30.48
57.4 42.9 35.56
62.5 48.0 40.64
70.1 55.6 48.26
82.8 68.3 60.96
82.8 68.3 60.96
95.5 81.0 73.66
95.5 81.0 73.66
100.6 86.1 78.74
100.6 86.1 78.74
21.8 27.9
21.8 27.9
26.9 33.0
29.5 35.5
34.5 40.6
42.2 48.3
47.2 53.3
52.3 58.4
59.9 66.0
72.6 78.7
72.6 78.7
85.3 91.4
85.3 91.4
90.4 96.5
90.4 96.5
The products marked with
None
One on right side
None
■
■
■
■
■
■
■
■
■
■
■
■
■
One on right side
One at center
One on right and
left sides, resp.
One on right and left sides, resp.
One at center
One on right and left sides, resp.
One at center
One on right and left sides, resp.
One at center
MAX119.7
■
comply with MIL standard.
B20
■Four-Wall Straight Dip
BPCB mounting pattern
Note 1, Note 2: The number of polarizing slot and key installed positions
changes according to products. Refer to the list as shown below.
Note 3: The spacer moves to the right according to the number of
contacts.
n=number of contacts
■
Note 4: The 10, 50, 60 and 64 contact connectors contain two types of
polarizing slots.
Use products, confirming (Note 1) (Note 2).
Note 5: The 6 contact has no polarity mark.
Unit:mm
Polarizing Slot
(Note 1)
Polarizing Key Install
(Note 2)
Part Number
CL No.
Number of Contacts
A
B
C
D
E
F
23.06
MAX46.02
28.14
MAX51.1
28.14
MAX51.1
33.24
MAX56.2
35.74
MAX58.7
40.84
MAX63.8
48.44
MAX71.4
53.54
MAX76.5
58.64
MAX81.6
66.24
MAX89.2
78.94
MAX101.9
78.94
MAX101.9
91.64
MAX114.6
91.64
MAX114.6
96.74
MAX119.7
96.74
MAX119.7
■
26.92 12.42
32.0 17.5
32.0 17.5
37.1 22.6
39.6 25.1
44.7 30.2
52.3 37.8
57.4 42.9
62.5 48.0
70.1 55.6
82.8 68.3
82.8 68.3
95.5 81.0
95.5 81.0
100.6 86.1
100.6 86.1
16.7 22.82
21.8 27.9
21.8 27.9
26.9 33.0
29.5 35.5
34.5 40.6
42.2 48.3
47.2 53.3
52.3 58.4
59.9 66.0
72.6 78.7
72.6 78.7
85.3 91.4
85.3 91.4
90.4 96.5
90.4 96.5
The products marked with
HIF3-6PA-2.54DSA
562-0503-9
6
05.08
10.16
10.16
15.24
17.78
22.86
30.48
35.56
40.64
48.26
60.96
60.96
73.66
73.66
78.74
78.74
One at center
None
HIF3BA-10PA-2.54DSA 610-0111-8
HIF3BD-10PA-2.54DSA 610-0181-3
HIF3BA-14PA-2.54DSA 610-0112-0
HIF3BA-16PA-2.54DSA 610-0113-3
HIF3BA-20PA-2.54DSA 610-0114-6
HIF3BA-26PA-2.54DSA 610-0115-9
HIF3BA-30PA-2.54DSA 610-0116-1
HIF3BA-34PA-2.54DSA 610-0117-4
HIF3BA-40PA-2.54DSA 610-0118-7
HIF3BA-50PA-2.54DSA 610-0119-0
HIF3BB-50PA-2.54DSA 610-0141-9
HIF3BA-60PA-2.54DSA 610-0120-9
HIF3BB-60PA-2.54DSA 610-0142-1
HIF3BA-64PA-2.54DSA 610-0121-1
HIF3BB-64PA-2.54DSA 610-0143-4
10
10
14
16
20
26
30
34
40
50
50
60
60
64
64
None
One on right side
None
■
■
■
■
■
■
■
■
■
■
■
■
■
■
One on right side
One at center
One on right and
left sides, resp.
One on right and left sides, resp.
One at center
One on right and left sides, resp.
One at center
One on right and left sides, resp.
One at center
■
comply with MIL standard.
B21
■Three Wall Angle Type
BPCB mounting pattern
Note 1, Note 2: The number of polarizing slot and key installed positions
changes according to products. Refer to the list as shown below.
Note 3: The spacer moves according to the number of contacts.
Note 4: The 10 contact connector consists of two types.
Use products, confirming (Note 1) (Note 2).
n=number of contacts
■
Note 5: The 6 contact has no polarity mark.
Note 6: The nut built-in specification product is also provided.
The product can be fixed by M2 screws from the rear side.
Use the screw of (board thickness) +4 mm under the neck.
Unit:mm
Polarizing Slot
(Note 1)
Polarizing Key Install
(Note 2)
Part Number
CL No.
Number of Contacts
A
B
C
D
E
F
28.14
MAX51.1
28.14
MAX51.1
35.74
MAX58.7
40.84
MAX63.8
48.44
MAX71.4
53.54
MAX76.5
58.64
MAX81.6
66.24
MAX89.2
78.94
■
HIF3BD-10PA-2.54DS 610-0051-8
HIF3BC-10PA-2.54DS 610-0151-2
HIF3BD-16PA-2.54DS 610-0052-0
HIF3BD-20PA-2.54DS 610-0053-3
HIF3BD-26PA-2.54DS 610-0054-6
HIF3BD-30PA-2.54DS 610-0055-9
HIF3BD-34PA-2.54DS 610-0056-1
HIF3BD-40PA-2.54DS 610-0057-4
HIF3BD-50PA-2.54DS 610-0058-7
HIF3BD-60PA-2.54DS 610-0059-0
HIF3BD-64PA-2.54DS 610-0060-9
10
10
16
20
26
30
34
40
50
60
64
32.0 17.5 10.16
32.0 17.5 10.16
39.6 25.1 17.78
44.7 30.2 22.86
52.3 37.8 30.48
57.4 42.9 35.56
62.5 48.0 40.64
70.1 55.6 48.26
82.8 68.3 60.96
95.5 81.0 73.66
100.6 86.1 78.74
21.8 27.9
None
One on right side
None
21.8 27.9
■
■
■
■
■
■
■
■
■
29.5 35.5
34.5 40.6
42.2 48.3
One at center
47.2 53.3
One on right and
left sides, resp.
52.3 58.4
59.9 66.0
72.6 78.7
MAX101.9
91.64
MAX114.6
96.74
85.3 91.4
One on right and left sides, resp.
90.4 96.5
MAX119.7
The products marked with
■ comply with MIL standard.
B22
■Three Wall Straight Dip
BPCB mounting pattern
Note1,Note2: The number of polarizing slot and key installed positions
changes according to products. Refer to the list as shown
below.
n=number of contacts
■
Note3: The spacer moves to the right according to the number of
contacts.
Note4: The 10 contact connector consists of two types.
Use products, referring to (Note 1) and (Note 2).
Note5: The 6 contact has no polarity mark.
Unit:mm
Polarizing Slot
(Note 1)
Polarizing Key Install
(Note 2)
Part Number
CL No.
Number of Contacts
A
B
C
D
E
F
28.14
MAX51.1
28.14
MAX51.1
35.74
MAX58.7
40.84
MAX63.8
48.44
MAX71.4
53.54
MAX76.5
58.64
MAX81.6
66.24
MAX89.2
78.94
■
HIF3BD-10PA-2.54DSA 610-0071-5
HIF3BC-10PA-2.54DSA 610-0161-6
HIF3BD-16PA-2.54DSA 610-0072-8
HIF3BD-20PA-2.54DSA 610-0073-0
HIF3BD-26PA-2.54DSA 610-0074-3
HIF3BD-30PA-2.54DSA 610-0075-6
HIF3BD-34PA-2.54DSA 610-0076-9
HIF3BD-40PA-2.54DSA 610-0077-1
HIF3BD-50PA-2.54DSA 610-0078-4
HIF3BD-60PA-2.54DSA 610-0079-7
HIF3BD-64PA-2.54DSA 610-0080-6
10
10
16
20
26
30
34
40
50
60
64
32.0 17.5 10.16
32.0 17.5 10.16
39.6 25.1 17.78
44.7 30.2 22.86
52.3 37.8 30.48
57.4 42.9 35.56
62.5 48.0 40.64
70.1 55.6 48.26
82.8 68.3 60.96
95.5 81.0 73.66
100.6 86.1 78.74
21.8 27.9
None
One on right side
None
21.8 27.9
■
■
■
■
■
■
■
■
■
29.5 35.5
34.5 40.6
42.2 48.3
One at center
47.2 53.3
One on right and
left sides, resp.
52.3 58.4
59.9 66.0
72.6 78.7
MAX101.9
91.64
MAX114.6
96.74
85.3 91.4
One on right and left sides, resp.
90.4 96.5
MAX119.7
The products marked with
■ comply with MIL standard.
B23
■Four Wall Wrapping Type
BPCB mounting pattern
Note 1, Note 2. The number of polarizing slot and key installed positions
changes according to products. Refer to the list as shown below.
Note 3. The spacer moves to the right according to the number of
contacts.
n=number of contacts
■
Note 4. The 10, 50, 60 and 64 contact connectors consists of two types.
Use products, confirming (Note 1) (Note 2).
Note 5. The mark * indicates the number of contacts.
Note 6. The nut built-in specification product is also provided.
The product can be fixed by M2 screws from the rear side.
Use the screw of (board thickness) +4 mm under the neck.
Unit:mm
Polarizing Slot
(Note 1)
Polarizing Key Install
(Note 2)
Part Number
CL No.
Number of Contacts
A
B
C
D
E
F
28.14
MAX51.1
28.14
MAX51.1
33.24
MAX56.2
35.74
MAX58.7
40.84
MAX63.8
48.44
MAX71.4
53.54
MAX76.5
58.64
MAX81.6
66.24
MAX89.2
78.94
MAX101.9
78.94
MAX101.9
91.64
MAX114.6
91.64
MAX114.6
96.74
MAX119.7
96.74
■
HIF3BA-10P-2.54W 610-0503-8
HIF3BD-10P-2.54W 610-0492-3
HIF3BA-14P-2.54W 610-0493-6
HIF3BA-16P-2.54W 610-0494-9
HIF3BA-20P-2.54W 610-0495-1
HIF3BA-26P-2.54W 610-0496-4
HIF3BA-30P-2.54W 610-0497-7
HIF3BA-34P-2.54W 610-0498-0
HIF3BA-40P-2.54W 610-0499-2
HIF3BA-50P-2.54W 610-0504-0
HIF3BB-50P-2.54W 610-0500-0
HIF3BA-60P-2.54W 610-0505-3
HIF3BB-60P-2.54W 610-0501-2
HIF3BA-64P-2.54W 610-0506-6
HIF3BB-64P-2.54W 610-0502-5
10
10
14
16
20
26
30
34
40
50
50
60
60
64
64
32.0 17.5 10.16
32.0 17.5 10.16
37.1 22.6 15.24
39.6 25.1 17.78
44.7 30.2 22.86
52.3 37.8 30.48
57.4 42.9 35.56
62.5 48.0 40.64
70.1 55.6 48.26
82.8 68.3 60.96
82.8 68.3 60.96
95.5 81.0 73.66
95.5 81.0 73.66
100.6 86.1 78.74
100.6 86.1 78.74
21.8 27.9
21.8 27.9
26.9 33.0
29.5 35.5
34.5 40.6
42.2 48.3
47.2 53.3
52.3 58.4
59.9 66.0
72.6 78.7
72.6 78.7
85.3 91.4
85.3 91.4
90.4 96.5
90.4 96.5
The products marked with
None
One on right side
None
■
■
■
■
■
■
■
■
■
■
■
■
■
One on right side
One at center
One on right and
left sides, resp.
One on right and left sides, resp.
One at center
One on right and left sides, resp.
One at center
One on right and left sides, resp.
One at center
MAX119.7
■
comply with MIL standard.
B24
■Four Wall Straight Dip
[
]
Flux Blister Prevention Type
BPCB mounting pattern
Note1: The number of polarizing slot and key installed positions changes
according to products. Refer to the list as shown below.
n=number of contacts
■
Unit:mm
Part Number
CL No.
Number of Contacts
A
B
C
D
E
F
Polarizing Slot
None
Polarizing Key Install
28.14
MAX51.1
28.14
MAX51.1
35.74
MAX58.7
40.84
MAX63.8
48.44
MAX71.4
53.54
MAX76.5
58.64
MAX81.6
66.24
MAX89.2
78.94
MAX101.9
78.94
MAX101.9
91.64
MAX114.6
96.74
MAX119.7
■
HIF3CA-10PA-2.54DSA 610-0701-1
HIF3CD-10PA-2.54DSA 610-0722-1
HIF3CA-16PA-2.54DSA 610-0703-7
HIF3CA-20PA-2.54DSA 610-0704-0
HIF3CA-26PA-2.54DSA 610-0705-2
HIF3CA-30PA-2.54DSA 610-0706-5
HIF3CA-34PA-2.54DSA 610-0707-8
HIF3CA-40PA-2.54DSA 610-0708-0
HIF3CA-50PA-2.54DSA 610-0709-3
HIF3CB-50PA-2.54DSA 610-0721-9
HIF3CB-60PA-2.54DSA 610-0723-4
HIF3CB-64PA-2.54DSA 610-0724-7
10
10
16
20
26
30
34
40
50
50
60
64
32.0 17.5 10.16
32.0 17.5 10.16
39.6 25.1 17.78
44.7 30.2 22.86
52.3 37.8 30.48
57.4 42.9 35.56
62.5 48.0 40.64
70.1 55.6 48.26
82.8 68.3 60.96
82.8 68.3 60.96
95.5 81.0 73.66
100.6 86.1 78.74
21.8 27.9
One on right side
None
21.8 27.9
■
■
■
■
■
■
■
■
■
■
29.5 35.5
34.5 40.6
42.2 48.3
One at center
47.2 53.3
52.3 58.4
One on right and
left sides, resp.
59.9 66.0
72.6 78.7
One on right and left sides, resp.
72.6 78.7
85.3 91.4
One at center
90.4 96.5
The products marked with
■ comply with MIL standard.
B25
■Two Stage Staking Right Angle Dip
Note 1, Note 2: The number of polarizing slot and key installed positions changes according to products. Refer
to the list as shown below.
Note 3: The spacer moves to the right according to the number of contacts.
Note 4: The 10, 50, 60 and 64 contact connectors consists of two types.
Use products, confirming (Note 1) (Note 2).
Note 5: The mark * ndicates the number of contacts.
Note 6: The locator is located optionally.
Unit:mm
Polarizing Slot
(Note 1)
Polarizing Key Install
(Note 2)
Part Number
CL No.
Number of Contacts
A
B
C
D
E
F
28.14
MAX51.1
28.14
MAX51.1
35.74
MAX58.7
40.84
MAX63.8
48.44
MAX71.4
53.54
MAX76.5
58.64
MAX81.6
66.24
MAX89.2
78.94
MAX101.9
78.94
MAX101.9
91.64
MAX114.6
91.64
MAX114.6
96.74
■
HIF3BA-10PA-2.54WB 610-1502-0
HIF3BD-10PA-2.54WB 610-1503-3
HIF3BA-16PA-2.54WB 610-1505-9
HIF3BA-20PA-2.54WB 610-1506-1
HIF3BA-26PA-2.54WB 610-1507-4
HIF3BA-30PA-2.54WB 610-1508-7
HIF3BA-34PA-2.54WB 610-1509-0
HIF3BA-40PA-2.54WB 610-1510-9
HIF3BA-50PA-2.54WB 610-1511-1
HIF3BB-50PA-2.54WB 610-1512-4
HIF3BA-60PA-2.54WB 610-1513-7
HIF3BB-60PA-2.54WB 610-1514-0
HIF3BA-64PA-2.54WB 610-1515-2
HIF3BB-64PA-2.54WB 610-1516-5
10
10
16
20
26
30
34
40
50
50
60
60
64
64
32.0 17.5 10.16
32.0 17.5 10.16
39.6 25.1 17.78
44.7 30.2 22.86
52.3 37.8 30.48
57.4 42.9 35.56
62.5 48.0 40.64
70.1 55.6 48.26
82.8 68.3 60.96
82.8 68.3 60.96
95.5 81.0 73.66
95.5 81.0 73.66
100.6 86.1 78.74
100.6 86.1 78.74
21.8 27.9
21.8 27.9
29.5 35.5
34.5 40.6
42.2 48.3
47.2 53.3
52.3 58.4
59.9 66.0
72.6 78.7
72.6 78.7
85.3 91.4
85.3 91.4
90.4 96.5
90.4 96.5
The products marked with
None
One on right side
None
■
■
■
■
■
■
■
■
■
■
■
■
One at center
One on right and
left sides, resp.
One on right and left sides, resp.
One at center
One on right and left sides, resp.
One at center
One on right and left sides, resp.
One at center
MAX119.7
96.74
MAX119.7
■
comply with MIL standard.
B26
BCombination Pattern
Note : Fix the HIF3-mounting hole spacer by screws between upper stage and lower stage connectors.
BPCB mounting pattern
■Mounting Hole Spacer
Part Number
CL No.
Finish
HIF-3 mounting hole spacer 562-0714-4
Note : 2 pieces are contained in a bag.
PBT Black
B27
BPolarizing Key
HIF3B-GK
CL562-0601-8
HIF3-GPIN(A)
HIF3BA-GPIN
Note1: One unit of this
product is a set of five
Note1: One unit of this
product is a set of five
pieces in conjunction
with a runner. The unit
for sale is defined one
pack containing 20
pieces.
pieces in conjunction
with a runner. The unit
for sale is defined one
pack containing 20
pieces.
Note2: This product is
Note2: This product is
applicable to HIF3A-
*D2.54R, HIF3C-
*D2.54C and
applicable to the
HIF3BA-*D2.54R
product.
HIF3BA-*D2.54C
products.
Part Number
HIF3-GPIN(A) 562-0126-6
Part Number
CL No.
CL No.
Material
Remarks
Material
Poly acetal (white)
Remarks
HIF3BA-GPIN 612-0500-2
Poly acetal (white) A set of 5 pieces
A set of 5 pieces
B28
BHIF3-Multi Clamp
BHIF3-*CL Pull Tab
This clamp is used for intermediate connection in the
bus-line system, etc. Remove compulsory force from the
insulation displacement area of the connector in
intermediate connection.
This pull tab is used for the HIF3 series equipped with cable clamp
function. Remove all compulsory force, which is loaded on the
insulation displacement area of the connector for extraction.
* Pull Tab can not be used for HIF3BA-*PD.
Note: This HIF3-
Note: The pin header corresponds to the HIF3BAE
series (lock E).
Note: The pin header corresponds to the HIF3BAE series (lock E).
BLock
■Low Profile Lock Pin Header
■F Type Lock Pin Header
Lock G
Lock F
Part Number : HIF3BAG-**PA-2.54DSA
Part Number : HIF3BAG-**PA-2.54DSA
■Low profile type, and used for lock ejection.
Connector height is reduced.
Since no connector clamp is needed on the cable side,
this is used without turning back on the cable side. Take
care about this point.
■Locking range more reduced than conventional lock type.
Even if connectors are aligned laterally, the mounting
space is reduced.
Note : The clamp must be replaced for HIF3A socket type
50 contacts only. Take care about this point.
B29
■Socket for Crimping
Unit: mm
Part Number
CL No.
Number of Contacts
A
B
Polarizing Guide
HIF3BA-10D-2.54C
HIF3BA-14D-2.54C
HIF3BA-16D-2.54C
HIF3BA-20D-2.54C
HIF3BA-26D-2.54C
HIF3BA-30D-2.54C
HIF3BA-34D-2.54C
HIF3BA-40D-2.54C
HIF3BA-50D-2.54C
HIF3BB-50D-2.54C
HIF3BA-60D-2.54C
HIF3BB-60D-2.54C
HIF3BA-64D-2.54C
HIF3BB-64D-2.54C
610-1041-0
610-1051-3
610-1042-2
610-1043-5
610-1044-8
610-1045-0
610-1046-3
610-1047-6
610-1048-9
610-1061-7
610-1049-1
610-1062-0
610-1064-5
610-1063-2
10
14
16
20
26
30
34
40
17.25 10.16
22.35 15.24
24.8
17.78
29.95 22.86
37.55 30.48
42.63 35.56
47.75 40.64
55.35 48.26
One at center
One right and left side, resp.
One at center
60.96
73.66
78.74
50
60
64
68.04
80.77
85.85
One right and left side, resp.
One at center
One right and left side, resp.
One at center
B30
■Cover Case for Crimping socket
Unit: mm
E
Part Number
HIF3-20CV
HIF3-26CV
HIF3-30CV
HIF3-34CV
HIF3-40CV
HIF3-50CV
HIF3-60CV
CL No.
Number of Contacts
A
B
C
D
562-0201-0
562-0202-2
562-0203-5
562-0204-8
562-0205-0
562-0206-3
562-0207-6
20
26
30
34
40
50
60
24.5
30.2
32.2
34.2
36.2
39.2
42.2
18.0
20.0
22.0
24.0
26.0
29.0
32.0
12.0
14.0
16.0
18.0
20.0
23.0
26.0
30.5
32.0
33.0
33.5
35.5
38.0
40.5
29.95
37.55
42.63
47.75
55.35
68.04
80.77
Note: The type F lock pin header cannot be used for a mating member.
B31
ꢀContact for Crimping Socket
gold plated contact in bag
gold plated contact in bag
gold plated contact in bag
HIF3-2022SC 562-0492-4
AWG#20 to #22
Applicable cable
HIF3-TA2022HC
Manual crimping tool
HIF3-2226SC 562-0079-8
HIF3-2226SCA 562-0244-2
HIF3-2428SC 562-0124-0
HIF3-2428SCA 562-0246-8
Selective gold plated contact in bag
Selective gold plated contact in bag
AWG#22 to #26
HIF3-T2226HC
AWG#24 to #28
HIF3-TA2428HC
Applicable cable
Manual crimping tool
Applicable cable
Manual crimping tool
gold plated contact in reel
gold plated contact in reel
gold plated contact in reel
HIF3-2226SCF 562-0080-7
HIF3-2226SCFA 562-0245-5
HIF3-2428SCF 562-0125-3
HIF3-2428SCFA 562-0247-0
HIF3-2022SCF 562-0493-7
Selective gold plated contact in reel
Selective gold plated contact in reel
AWG#20 to #22
Applicable cable
AWG#22 to #26
AWG#24 to #28
Applicable cable
Applicable cable
Type VA (Selective gold plated in reel)
Applicable Cable
Part Number
CL No.
A
B
C
D
E
F
11.5 0.8 1.8 1.8 2.3 2.6
11.5 0.8 1.4 1.35 2.0 2.1
12.4 1.7 1.1 1.1 1.4 1.5
AWG#22 to #26
AWG#26 to #30
AWG#32 to #36
HIF3-2226SCFC 613-0002-1
HIF3-2630SCFC 613-0001-9
HIF3A-3236SCFC 613-0005-0
Type VA (Selective gold plated contact in bag)
Applicable Cable Manual Crimp Tool
Part Number
CL No.
A
B
C
D
E
F
AWG#22 to #26 HIF3-TB2226HC 11.5 0.8 1.8 1.8 2.3 2.6
AWG#26 to #30 HIF3-TB2630HC 11.5 0.8 1.4 1.35 2.0 2.1
HIF3-2226SCC 613-0004-7
HIF3-2630SCC 613-0003-4
B32
BTools
ꢀCrimping Tool
Part Number
CL No.
HIF3-T2226HC
550-0063-8
Manual Crimping Tool HIF3-T2226HC
ꢀAutomatic Crimping Tool (Type: CM-105)
Part Number
CM-105
CL No.
901-0005-4
ꢀContact Extraction Tools
How to use the extraction tool
(2) How to adjust the lance (raise)
(1) How to extract contacts
In order to re-insert the contact
removed from the insulated case,
raise the contact lance area using the
tool A, and re-insert the contact, as
shown in Figure 2.
As shown in Figure 1, where the
extraction tool is inserted in the lance
fixed slot on the insulated case, slightly
pull the cable, and the contact can be
removed.
Part Number
HIF1-PO
CL No.
550-0049-7
Figure 1
B33
Part Number
HIF3-T2226HC
CL No.
Applicable Contact
Applicable Cable
AWG#22 to #26
Type
Item
Manual
Manual crimping tool
HIF3-2226SC
HIF3-2226SCA
550-0063-8
HIF3-2428SC
HIF3-2428SCA
HIF3-TA2428HC
550-0100-2
AWG#24 to #28
HIF3-TA2022HC
HIF3-TB2226HC
HIF3-TB2630HC
CM-105
550-0124-0
550-0154-1
550-0155-4
901-0005-4
AWG#20 to #22
AWG#22 to #26
AWG#26 to #30
HIF3-2022SC
HIF3-2226SCC
HIF3-2630SCC
–––––––
Automatic
Automatic crimping tool unit
Applicator
–––––––
AWG#22 to #26
AWG#24 to #28
AWG#22 to #26
AWG#24 to #28
HIF3-2226SCF
HIF3-2428SCF
HIF3-2226SCFA
HIF3-2428SCFA
AP105-HIF3-22-28SCF
901-4031-6
901-4030-3
(
)
)
Note1
AP105-HIF3-22-28SCFA
(
Note1
AP105-HIF3-2022S
901-4027-9
901-4005-6
901-4006-9
901-4007-1
550-0049-7
HIF3-2022SCF
HIF3-2226SCFC
HIF3-2630SCFC
HIF3-3236SCFC
–––––––
AWG#20 to #22
AWG#22 to #26
AWG#26 to #30
AWG#32 to #36
–––––––
AP105-HIF3-2226SCFC
AP105-HIF3-2630SCFC
AP105-HIF3-3236SCFC
HIF1-PO
Extraction tool
Note1: AP106-HIF3-22-28SCF and AP105-HIF3-22-28CFA can be modified by changing a few parts.
B34
BSocket Side (Crimping) Assembling Procedures
(1) As shown in Figure 1, peel the applicable cable (AWG#20 to #26) jacket, and connect it using crimping jig HIF3-TA2022HC,
HIF3-TA2226HC, or HIF3-TA2426HC. In this case, insert the cable so as to hit the contact cable stripper position as shown
Figure 2.
(2) After connection as shown Figure 2, check the contact direction, and insert the contact as shown Figures 3 and 4. Slightly pull
the cable, and check whether the contact lance position is firmly fixed to the insulation case, as shown in the area (A).
Note : For handling procedures for special crimping tools, refer to the "Handling Instruction Manual".
Figure 1
Figure 2
Figure 3
Figure 4
B35
HIF3B Connection Circuit Diagram
Type AB
Type AD
Type CD
B36
Type AC
Type CC
Type AA
B37
HIF2E R(S) A to HIF3B Connection Circuit Diagram
Type AA
Type AC
B38
Type BA
Type BC
B39
HIF2E R(S)B to HIF3 Connection Circuit Diagram
Type AA
Type AC
B40
Type BA
Type BC
B41
HIF3BA-20D-2.54R-CL 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
HIF3BA-20D-2.54R-CL(21) | HRS | Cover (HIF3B Series) against EMI (Electromagnetic Interference) | 获取价格 | |
HIF3BA-20D-2.54R-CL(71) | HRS | Board Connector, 20 Contact(s), 2 Row(s), Female, 0.1 inch Pitch, IDC Terminal, Guide Slot, Black Insulator | 获取价格 | |
HIF3BA-20D-2.54R-CL21 | HRS | Cover (HIF3B Series) against EMI (Electromagnetic Interference) | 获取价格 | |
HIF3BA-20D-254C | ETC | Ribbon Cable connector Compliant with MIL Standard | 获取价格 | |
HIF3BA-20DA-2.54R | HRS | Ribbon Cable connector Compliant with MIL Standard | 获取价格 | |
HIF3BA-20P-2.54PFA-2(71) | HRS | Board Connector, 20 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Press Fit Terminal, Latch, Black Insulator | 获取价格 | |
HIF3BA-20P-2.54W | HRS | Board Connector, 20 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Wire Wrap Terminal, Latch & Eject, Black Insulator, Receptacle, ROHS COMPLIANT | 获取价格 | |
HIF3BA-20P-2.54W(88) | HRS | Board Connector, 20 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Wire Wrap Terminal, Latch, Black Insulator | 获取价格 | |
HIF3BA-20PA-2.54DS | HRS | Ribbon Cable connector Compliant with MIL Standard | 获取价格 | |
HIF3BA-20PA-2.54DS(63) | HRS | 连接器类型:插头;线束品:无;参考规格:MIL;安全规格:UL, C-UL/CSA;PIN数:20;额定电流:1.0 A;(AC)额定电压:AC 200.0 V;(嵌合部分)列数:2;安装间距:2 | 获取价格 |
HIF3BA-20D-2.54R-CL 相关文章
- 2024-09-20
- 5
- 2024-09-20
- 8
- 2024-09-20
- 8
- 2024-09-20
- 6