HIF3BA-34P-2.54W [HRS]
Ribbon Cable connector Compliant with MIL Standard;型号: | HIF3BA-34P-2.54W |
厂家: | HRS |
描述: | Ribbon Cable connector Compliant with MIL Standard |
文件: | 总29页 (文件大小:790K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Ribbon Cable connector Compliant with MIL Standard
HIF3B Series
■Features
1. Product Compliant with MIL Standard
HIF3B series has been developed as a product compliant with MIL
standard, and used for wide applications.
2. UL Approval Product
HIF3B series connectors are UL approved.
3. Mechanism to Prevent Mis-insertion
This connector is equipped with the mechanism to prevent Mis-
insertion as follows.
1 The system provides the convex area to insert the guide-key on the
pin header side, and to guide it in combination with the socket
convex area (MIL standard).
2
The system embeds and guides the polarizing key in the socket holes.
4. Applicable Cable AWG#28
The applicable cable is UL2651 AWG#28 flat cable (7 cores./
0.127mm, jacket dia. 0.9 0.1mm).
■Product Specifications
(
)
(
)
Current rating : 1A
Operating Temperature Range
:
–55 to +85ç Note 1 Storage Temperature Range : –10 to +60ç Note 2
Rating
(
)
Voltage rating : 200V AC Operating Moisture Range : 40 to 80%
Storage Humidity Range : 40 to 70% Note 2
Item
Specification
Condition
1. Insulation Resistance 1000M ohms min.
500V DC
2. Withstanding voltage No flashover or insulation breakdown.
650V AC/1 minute
0.1A
3. Contact Resistance
4. Vibration
15m ohms max.
No electrical discontinuity of 1μs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
96 hours at temperature of 40ç and humidity of 90% to 95%
(-55ç: 30 minutes ➝ 15 to 35ç: 5 minutes max.
125ç: 30 minutes ➝ 15 to 35ç: 5 minutes max.) 5 cycles
500 cycles
5. Humidity (Steady state) Insulation resistance: 1000M ohms min.
6. Temperature Cycle No damage, cracks, or parts looseness.
7. Durability (Mating/un-mating) Contact resistance: 15m ohms max.
Solder bath:
260ç for 10 seconds
8. Resistance to Soldering heat No deformation of components affecting performance.
Manual soldering: 360ç for 5 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Note 3: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a
specific part number shown.
Note 4: Please note that there is a risk of deforming the lock when an excessive load is applied to the inside.
■Material
Part
Material
PBT
Finish
Black
Remarks
UL94V-0
–––––––
–––––––
Insulator
Socket Contact
Pin header contact
Beryllium copper
Brass
Connection area
Gold plated
Selective Gold plated
B15
HIF3B Series●Ribbon Cable connector Compliant with MIL Standard
■Ordering Information
●Socket
HIF 3B - * D - 2.54 R
q
w
e
r
t
y
q Series Name
w Series No.
: HIF
: 3B, 3BA, 3BB 50, 60, 64 contacts only
(
)
e
r
Number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64
Contact alignment : D : Double
t Contact pitch
: 2.54mm
y Connection type
R : ID type
●Pin Header
HIF 3B - * P A - 2.54 DS
q
w
e
r
t
y
u
q Series Name : HIF
w Series No.
3B
:
:
(14 contacts not included) 3BC: (10 contacts only)
3BA, 3BB: (50, 60, 64 contacts only) 3BD: (10 contacts only)
Number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64
e
r
t
P
A
: Pin header
: Selective gold plated
y Contact pitch : 2.54mm
u Contact style
DS
: Right angle type
: Straight type
DSA
B16
HIF3B Series●Ribbon Cable connector Compliant with MIL Standard
■Socket (With guide to prevent mis-insertion)
Body
Protector
Clamp
Note1, Note2: The number of polarizing keys and polarizing keyways changes according to products. Refer to the list as shown below.
Note3: The 50, 60 and 64 contact connector contain two types of polarizing guides. Use the products, referring to Notes 1 and 2.
Note4: The 6 contact has no polarizing mark.
Unit:mm
Polarizing Guide
(Note 1)
Polarizing Keyway
(Note 2)
Part Number
CL No.
Number of Contacts
A
B
C
D
RoHS
HIF3BA- 6D-2.54R 610-0032-3
HIF3BA-10D-2.54R 610-0021-7
HIF3BA-14D-2.54R 610-0022-0
HIF3BA-16D-2.54R 610-0023-2
HIF3BA-20D-2.54R 610-0024-5
HIF3BA-26D-2.54R 610-0025-8
HIF3BA-30D-2.54R 610-0026-0
HIF3BA-34D-2.54R 610-0027-3
HIF3BA-40D-2.54R 610-0028-6
HIF3BA-50D-2.54R 610-0029-9
HIF3BB-50D-2.54R 610-0041-4
HIF3BA-60D-2.54R 610-0030-8
HIF3BB-60D-2.54R 610-0042-7
HIF3BA-64D-2.54R 610-0031-0
HIF3BB-64D-2.54R 610-0043-0
6
12.19 5.08 6.35 7.72
17.27 10.16 11.43 12.8
22.35 15.24 16.51 17.88
24.89 17.78 19.05 20.42
29.97 22.86 24.13 25.5
37.59 30.48 31.75 33.12
42.67 35.56 36.83 38.2
47.75 40.64 41.91 43.28
55.37 48.26 49.53 50.9
68.07 60.96 62.23 63.6
68.07 60.96 62.23 63.6
80.77 73.66 74.93 76.3
80.77 73.66 74.93 76.3
85.85 78.74 80.01 81.38
85.85 78.74 80.01 81.38
None
10
14
16
20
26
30
34
40
50
50
60
60
64
64
One on left side
★
★
★
★
★
★
★
★
★
★
★
★
★
One at center
YES
One on right and
left sides, resp.
One on right and left sides, resp.
One at center
One on right and left sides, resp.
One at center
One on right and left sides, resp.
One at center
The products marked with
★ comply with MIL standard.
B17
HIF3B Series●Ribbon Cable connector Compliant with MIL Standard
■Socket
Body
Protector
Clamp
Note1: The number of polarizing keys and polarizing keyways changes according to products. For details, refer to the list as shown below.
Note2: The 6 contact has no polarizing mark.
Unit:mm
Polarizing Guide
Part Number
CL No.
Number of Contacts
A
B
C
D
RoHS
(Note 1)
HIF3B- 6D-2.54R 610-0012-6
HIF3B-10D-2.54R 610-0001-0
HIF3B-14D-2.54R 610-0002-2
HIF3B-16D-2.54R 610-0003-5
HIF3B-20D-2.54R 610-0004-8
HIF3B-26D-2.54R 610-0005-0
HIF3B-30D-2.54R 610-0006-3
HIF3B-34D-2.54R 610-0007-6
HIF3B-40D-2.54R 610-0008-9
HIF3B-50D-2.54R 610-0009-1
HIF3B-60D-2.54R 610-0010-0
HIF3B-64D-2.54R 610-0011-3
6
12.19 5.08 6.35 7.72
17.27 10.16 11.43 12.80
22.35 15.24 16.51 17.88
24.89 17.78 19.05 20.42
29.97 22.86 24.13 25.50
37.59 30.48 31.75 33.12
42.67 35.56 36.83 38.2
47.75 40.64 41.91 43.28
55.37 48.26 49.53 50.90
68.07 60.96 62.23 63.6
80.77 73.66 74.93 76.3
85.85 78.74 80.01 81.38
The products marked with
None
★
★
★
★
★
★
★
★
★
★
★
10
14
16
20
26
30
34
40
50
60
64
One on left side
YES
One on right and
left sides, resp.
★
comply with MIL standard.
B18
HIF3B Series●Ribbon Cable connector Compliant with MIL Standard
■Four Wall Angle Through hole
BPCB mounting pattern
Note 1, Note 2: The number of polarizing slot and key installed positions
changes according to products. Refer to the list as shown below.
Note 3: The spacer moves to the right according to the number of
contacts.
Note 4: The 10, 50, 60 and 64 contact connectors contain two types of
polarizing slots.
n=number of contacts
■
Use products, referring to (Note 1) (Note 2).
Unit:mm
Polarizing Slot
(Note 1)
Polarizing Key Install
(Note 2)
Part Number
CL No.
Number of Contacts
A
B
C
D
E
F
RoHS
28.14
MAX51.1
28.14
MAX51.1
33.24
MAX56.2
35.74
MAX58.7
40.84
MAX63.8
48.44
MAX71.4
53.54
MAX76.5
58.64
MAX81.6
66.24
MAX89.2
78.94
MAX101.9
78.94
MAX101.9
91.64
MAX114.6
91.64
MAX114.6
96.74
MAX119.7
96.74
★
HIF3BA-10PA-2.54DS(71) 610-0091-2(71)
HIF3BD-10PA-2.54DS(71) 610-0171-0(71)
HIF3BA-14PA-2.54DS(71) 610-0092-5(71)
HIF3BA-16PA-2.54DS(71) 610-0093-8(71)
HIF3BA-20PA-2.54DS(71) 610-0094-0(71)
HIF3BA-26PA-2.54DS(71) 610-0095-3(71)
HIF3BA-30PA-2.54DS(71) 610-0096-6(71)
HIF3BA-34PA-2.54DS(71) 610-0097-9(71)
HIF3BA-40PA-2.54DS(71) 610-0098-1(71)
HIF3BA-50PA-2.54DS(71) 610-0099-4(71)
HIF3BB-50PA-2.54DS(71) 610-0131-5(71)
HIF3BA-60PA-2.54DS(71) 610-0100-1(71)
HIF3BB-60PA-2.54DS(71) 610-0132-8(71)
HIF3BA-64PA-2.54DS(71) 610-0101-4(71)
HIF3BB-64PA-2.54DS(71) 610-0133-0(71)
10
10
14
16
20
26
30
34
40
50
50
60
60
64
64
32.0 17.5 10.16
32.0 17.5 10.16
37.1 22.6 15.24
39.6 25.1 17.78
44.7 30.2 22.86
52.3 37.8 30.48
57.4 42.9 35.56
62.5 48.0 40.64
70.1 55.6 48.26
82.8 68.3 60.96
82.8 68.3 60.96
95.5 81.0 73.66
95.5 81.0 73.66
100.6 86.1 78.74
100.6 86.1 78.74
21.8 27.9
21.8 27.9
26.9 33.0
29.5 35.5
34.5 40.6
42.2 48.3
47.2 53.3
52.3 58.4
59.9 66.0
72.6 78.7
72.6 78.7
85.3 91.4
85.3 91.4
90.4 96.5
90.4 96.5
None
One on right side
None
★
★
★
★
★
★
★
★
★
★
★
★
★
One on right side
One at center
YES
One on right and
left sides, resp.
One on right and left sides, resp.
One at center
One on right and left sides, resp.
One at center
One on right and left sides, resp.
One at center
MAX119.7
The products marked with
★ comply with MIL standard.
B19
HIF3B Series●Ribbon Cable connector Compliant with MIL Standard
■Four-Wall Straight Through hole
BPCB mounting pattern
Note 1, Note 2: The number of polarizing slot and key installed positions
changes according to products. Refer to the list as shown below.
Note 3: The spacer moves to the right according to the number of
contacts.
n=number of contacts
■
Note 4: The 10, 50, 60 and 64 contact connectors contain two types of
polarizing slots.
Use products, confirming (Note 1) (Note 2).
Note 5: The 6 contact has no polarity mark.
Unit:mm
Polarizing Slot
(Note 1)
Polarizing Key Install
(Note 2)
Part Number
CL No.
Number of Contacts
A
B
C
D
E
F
RoHS
23.06
MAX46.02
28.14
MAX51.1
28.14
MAX51.1
33.24
MAX56.2
35.74
MAX58.7
40.84
MAX63.8
48.44
MAX71.4
53.54
MAX76.5
58.64
MAX81.6
66.24
MAX89.2
78.94
MAX101.9
78.94
MAX101.9
91.64
MAX114.6
91.64
MAX114.6
96.74
MAX119.7
96.74
MAX119.7
★
(71)
26.92 12.42
32.0 17.5
32.0 17.5
37.1 22.6
39.6 25.1
44.7 30.2
52.3 37.8
57.4 42.9
62.5 48.0
70.1 55.6
82.8 68.3
82.8 68.3
95.5 81.0
95.5 81.0
100.6 86.1
100.6 86.1
16.7 22.82
21.8 27.9
21.8 27.9
26.9 33.0
29.5 35.5
34.5 40.6
42.2 48.3
47.2 53.3
52.3 58.4
59.9 66.0
72.6 78.7
72.6 78.7
85.3 91.4
85.3 91.4
90.4 96.5
90.4 96.5
HIF3-6PA-2.54DSA
562-0503-9-71
610-0111-8-71
610-0181-3-71
610-0112-0-71
610-0113-3-71
610-0114-6-71
610-0115-9-71
610-0116-1-71
610-0117-4-71
610-0118-7-71
610-0119-0-71
610-0141-9-71
610-0120-9-71
610-0142-1-71
610-0121-1-71
610-0143-4-71
6
05.08
10.16
10.16
15.24
17.78
22.86
30.48
35.56
40.64
48.26
60.96
60.96
73.66
73.66
78.74
78.74
One at center
None
None
(71)
(71)
(71)
(71)
(71)
(71)
(71)
(71)
(71)
(71)
(71)
(71)
(71)
(71)
(71)
HIF3BA-10PA-2.54DSA
HIF3BD-10PA-2.54DSA
HIF3BA-14PA-2.54DSA
HIF3BA-16PA-2.54DSA
HIF3BA-20PA-2.54DSA
HIF3BA-26PA-2.54DSA
HIF3BA-30PA-2.54DSA
HIF3BA-34PA-2.54DSA
HIF3BA-40PA-2.54DSA
HIF3BA-50PA-2.54DSA
HIF3BB-50PA-2.54DSA
HIF3BA-60PA-2.54DSA
HIF3BB-60PA-2.54DSA
HIF3BA-64PA-2.54DSA
HIF3BB-64PA-2.54DSA
10
10
14
16
20
26
30
34
40
50
50
60
60
64
64
One on right side
None
★
★
★
★
★
★
★
★
★
★
★
★
★
★
One on right side
One at center
YES
One on right and
left sides, resp.
One on right and left sides, resp.
One at center
One on right and left sides, resp.
One at center
One on right and left sides, resp.
One at center
The products marked with
★ comply with MIL standard.
B20
HIF3B Series●Ribbon Cable connector Compliant with MIL Standard
■Three Wall Angle Type
BPCB mounting pattern
Note 1, Note 2: The number of polarizing slot and key installed positions
changes according to products. Refer to the list as shown below.
Note 3: The spacer moves according to the number of contacts.
Note 4: The 10 contact connector consists of two types.
Use products, confirming (Note 1) (Note 2).
n=number of contacts
■
Unit:mm
Polarizing Slot
(Note 1)
Polarizing Key Install
(Note 2)
Part Number
CL No.
Number of Contacts
A
B
C
D
E
F
RoHS
28.14
MAX51.1
28.14
MAX51.1
35.74
MAX58.7
40.84
MAX63.8
48.44
MAX71.4
53.54
MAX76.5
58.64
MAX81.6
66.24
MAX89.2
78.94
★
HIF3BD-10PA-2.54DS(71) 610-0051-8-71
HIF3BC-10PA-2.54DS(71) 610-0151-2-71
HIF3BD-16PA-2.54DS(71) 610-0052-0-71
HIF3BD-20PA-2.54DS(71) 610-0053-3-71
HIF3BD-26PA-2.54DS(71) 610-0054-6-71
HIF3BD-30PA-2.54DS(71) 610-0055-9-71
HIF3BD-34PA-2.54DS(71) 610-0056-1-71
HIF3BD-40PA-2.54DS(71) 610-0057-4-71
HIF3BD-50PA-2.54DS(71) 610-0058-7-71
HIF3BD-60PA-2.54DS(71) 610-0059-0-71
HIF3BD-64PA-2.54DS(71) 610-0060-9-71
10
10
16
20
26
30
34
40
50
60
64
32.0 17.5 10.16
32.0 17.5 10.16
39.6 25.1 17.78
44.7 30.2 22.86
52.3 37.8 30.48
57.4 42.9 35.56
62.5 48.0 40.64
70.1 55.6 48.26
82.8 68.3 60.96
95.5 81.0 73.66
100.6 86.1 78.74
21.8 27.9
21.8 27.9
29.5 35.5
34.5 40.6
42.2 48.3
47.2 53.3
52.3 58.4
59.9 66.0
72.6 78.7
85.3 91.4
90.4 96.5
None
One on right side
None
★
★
★
★
★
★
★
★
★
One at center
YES
One on right and
left sides, resp.
MAX101.9
91.64
MAX114.6
96.74
One on right and left sides, resp.
MAX119.7
The products marked with
★ comply with MIL standard.
B21
HIF3B Series●Ribbon Cable connector Compliant with MIL Standard
■Three Wall Straight Through hole
BPCB mounting pattern
Note1,Note2: The number of polarizing slot and key installed positions
changes according to products. Refer to the list as shown
below.
n=number of contacts
■
Note3: The spacer moves to the right according to the number of
contacts.
Note4: The 10 contact connector consists of two types.
Use products, referring to (Note 1) and (Note 2).
Unit:mm
Polarizing Slot
(Note 1)
Polarizing Key Install
(Note 2)
Part Number
CL No.
Number of Contacts
A
B
C
D
E
F
RoHS
28.14
MAX51.1
28.14
MAX51.1
35.74
MAX58.7
40.84
MAX63.8
48.44
MAX71.4
53.54
MAX76.5
58.64
MAX81.6
66.24
MAX89.2
78.94
★
HIF3BD-10PA-2.54DSA(71) 610-0071-5-71
HIF3BC-10PA-2.54DSA(71) 610-0161-6-71
HIF3BD-16PA-2.54DSA(71) 610-0072-8-71
HIF3BD-20PA-2.54DSA(71) 610-0073-0-71
HIF3BD-26PA-2.54DSA(71) 610-0074-3-71
HIF3BD-30PA-2.54DSA(71) 610-0075-6-71
HIF3BD-34PA-2.54DSA(71) 610-0076-9-71
HIF3BD-40PA-2.54DSA(71) 610-0077-1-71
HIF3BD-50PA-2.54DSA(71) 610-0078-4-71
HIF3BD-60PA-2.54DSA(71) 610-0079-7-71
HIF3BD-64PA-2.54DSA(71) 610-0080-6-71
10
10
16
20
26
30
34
40
50
60
64
32.0 17.5 10.16
32.0 17.5 10.16
39.6 25.1 17.78
44.7 30.2 22.86
52.3 37.8 30.48
57.4 42.9 35.56
62.5 48.0 40.64
70.1 55.6 48.26
82.8 68.3 60.96
95.5 81.0 73.66
100.6 86.1 78.74
21.8 27.9
21.8 27.9
29.5 35.5
34.5 40.6
42.2 48.3
47.2 53.3
52.3 58.4
59.9 66.0
72.6 78.7
85.3 91.4
90.4 96.5
None
One on right side
None
★
★
★
★
★
★
★
★
★
One at center
YES
One on right and
left sides, resp.
MAX101.9
91.64
MAX114.6
96.74
One on right and left sides, resp.
MAX119.7
The products marked with
★ comply with MIL standard.
B22
HIF3B Series●Ribbon Cable connector Compliant with MIL Standard
■Four Wall Wrapping Type
BPCB mounting pattern
Note 1, Note 2. The number of polarizing slot and key installed positions
changes according to products. Refer to the list as shown below.
Note 3. The spacer moves to the right according to the number of
contacts.
n=number of contacts
■
Note 4. The 10, 50, 60 and 64 contact connectors consists of two types.
Use products, confirming (Note 1) (Note 2).
Note 5. The mark * indicates the number of contacts.
Note 6. The nut built-in specification product is also provided.
The product can be fixed by M2 screws from the rear side.
Use the screw of (board thickness) +4 mm under the neck.
Unit:mm
Polarizing Slot
(Note 1)
Polarizing Key Install
(Note 2)
Part Number
CL No.
Number of Contacts
A
B
C
D
E
F
RoHS
28.14
MAX51.1
28.14
MAX51.1
33.24
MAX56.2
35.74
MAX58.7
40.84
MAX63.8
48.44
MAX71.4
53.54
MAX76.5
58.64
MAX81.6
66.24
MAX89.2
78.94
MAX101.9
78.94
MAX101.9
91.64
MAX114.6
91.64
MAX114.6
96.74
MAX119.7
96.74
★
HIF3BA-10P-2.54W 610-0503-8
HIF3BD-10P-2.54W 610-0492-3
HIF3BA-14P-2.54W 610-0493-6
HIF3BA-16P-2.54W 610-0494-9
HIF3BA-20P-2.54W 610-0495-1
HIF3BA-26P-2.54W 610-0496-4
HIF3BA-30P-2.54W 610-0497-7
HIF3BA-34P-2.54W 610-0498-0
HIF3BA-40P-2.54W 610-0499-2
HIF3BA-50P-2.54W 610-0504-0
HIF3BB-50P-2.54W 610-0500-0
HIF3BA-60P-2.54W 610-0505-3
HIF3BB-60P-2.54W 610-0501-2
HIF3BA-64P-2.54W 610-0506-6
HIF3BB-64P-2.54W 610-0502-5
10
10
14
16
20
26
30
34
40
50
50
60
60
64
64
32.0 17.5 10.16
32.0 17.5 10.16
37.1 22.6 15.24
39.6 25.1 17.78
44.7 30.2 22.86
52.3 37.8 30.48
57.4 42.9 35.56
62.5 48.0 40.64
70.1 55.6 48.26
82.8 68.3 60.96
82.8 68.3 60.96
95.5 81.0 73.66
95.5 81.0 73.66
100.6 86.1 78.74
100.6 86.1 78.74
21.8 27.9
21.8 27.9
26.9 33.0
29.5 35.5
34.5 40.6
42.2 48.3
47.2 53.3
52.3 58.4
59.9 66.0
72.6 78.7
72.6 78.7
85.3 91.4
85.3 91.4
90.4 96.5
90.4 96.5
None
One on right side
None
★
★
★
★
★
★
★
★
★
★
★
★
★
One on right side
One at center
YES
One on right and
left sides, resp.
One on right and left sides, resp.
One at center
One on right and left sides, resp.
One at center
One on right and left sides, resp.
One at center
MAX119.7
The products marked with
★ comply with MIL standard.
B23
HIF3B Series●Ribbon Cable connector Compliant with MIL Standard
■Four Wall Straight Through hole
[
]
Flux Blister Prevention Type
BPCB mounting pattern
Note1: The number of polarizing slot and key installed positions changes
according to products. Refer to the list as shown below.
n=number of contacts
■
Unit:mm
Part Number
CL No.
Number of Contacts
A
B
C
D
E
F
Polarizing Slot
None
Polarizing Key Install RoHS
28.14
MAX51.1
28.14
MAX51.1
35.74
MAX58.7
40.84
MAX63.8
48.44
MAX71.4
53.54
MAX76.5
58.64
MAX81.6
66.24
MAX89.2
78.94
MAX101.9
78.94
MAX101.9
91.64
MAX114.6
96.74
MAX119.7
★
HIF3CA-10PA-2.54DSA(71) 610-0701-1-71
HIF3CD-10PA-2.54DSA(71) 610-0722-1-71
HIF3CA-16PA-2.54DSA(71) 610-0703-7-71
HIF3CA-20PA-2.54DSA(71) 610-0704-0-71
HIF3CA-26PA-2.54DSA(71) 610-0705-2-71
HIF3CA-30PA-2.54DSA(71) 610-0706-5-71
HIF3CA-34PA-2.54DSA(71) 610-0707-8-71
HIF3CA-40PA-2.54DSA(71) 610-0708-0-71
HIF3CA-50PA-2.54DSA(71) 610-0709-3-71
HIF3CB-50PA-2.54DSA(71) 610-0721-9-71
HIF3CB-60PA-2.54DSA(71) 610-0723-4-71
HIF3CB-64PA-2.54DSA(71) 610-0724-7-71
10
10
16
20
26
30
34
40
50
50
60
64
32.0 17.5 10.16
32.0 17.5 10.16
39.6 25.1 17.78
44.7 30.2 22.86
52.3 37.8 30.48
57.4 42.9 35.56
62.5 48.0 40.64
70.1 55.6 48.26
82.8 68.3 60.96
82.8 68.3 60.96
95.5 81.0 73.66
21.8 27.9
21.8 27.9
29.5 35.5
34.5 40.6
42.2 48.3
47.2 53.3
52.3 58.4
59.9 66.0
72.6 78.7
72.6 78.7
85.3 91.4
90.4 96.5
One on right side
None
★
★
★
★
★
★
★
★
★
★
One at center
YES
One on right and
left sides, resp.
One on right and left sides, resp.
One at center
100.6 86.1 78.74
The products marked with
★ comply with MIL standard.
B24
HIF3B Series●Ribbon Cable connector Compliant with MIL Standard
■Two Stage Staking Right Angle Through hole
Note 1, Note 2: The number of polarizing slot and key installed positions changes according to products. Refer
to the list as shown below.
Note 3: The spacer moves to the right according to the number of contacts.
Note 4: The 10, 50, 60 and 64 contact connectors consists of two types.
Use products, confirming (Note 1) (Note 2).
Note 5: The mark * ndicates the number of contacts.
Note 6: The locator is located optionally.
Unit:mm
Polarizing Key Install
Polarizing Slot
(Note 1)
Part Number
CL No.
Number of Contacts
A
B
C
D
E
F
RoHS
(Note 2)
28.14
MAX51.1
28.14
MAX51.1
35.74
MAX58.7
40.84
MAX63.8
48.44
MAX71.4
53.54
MAX76.5
58.64
MAX81.6
66.24
MAX89.2
78.94
MAX101.9
78.94
MAX101.9
91.64
MAX114.6
91.64
MAX114.6
96.74
★
HIF3BA-10PA-2.54WB(71) 610-1502-0-71
HIF3BD-10PA-2.54WB(71) 610-1503-3-71
HIF3BA-16PA-2.54WB(71) 610-1505-9-71
HIF3BA-20PA-2.54WB(71) 610-1506-1-71
HIF3BA-26PA-2.54WB(71) 610-1507-4-71
HIF3BA-30PA-2.54WB(71) 610-1508-7-71
HIF3BA-34PA-2.54WB(71) 610-1509-0-71
HIF3BA-40PA-2.54WB(71) 610-1510-9-71
HIF3BA-50PA-2.54WB(71) 610-1511-1-71
HIF3BB-50PA-2.54WB(71) 610-1512-4-71
HIF3BA-60PA-2.54WB(71) 610-1513-7-71
HIF3BB-60PA-2.54WB(71) 610-1514-0-71
HIF3BA-64PA-2.54WB(71) 610-1515-2-71
HIF3BB-64PA-2.54WB(71) 610-1516-5-71
10
10
16
20
26
30
34
40
50
50
60
60
64
64
32.0 17.5 10.16
32.0 17.5 10.16
39.6 25.1 17.78
44.7 30.2 22.86
52.3 37.8 30.48
57.4 42.9 35.56
62.5 48.0 40.64
70.1 55.6 48.26
82.8 68.3 60.96
82.8 68.3 60.96
95.5 81.0 73.66
95.5 81.0 73.66
100.6 86.1 78.74
100.6 86.1 78.74
21.8 27.9
21.8 27.9
29.5 35.5
34.5 40.6
42.2 48.3
47.2 53.3
52.3 58.4
59.9 66.0
72.6 78.7
72.6 78.7
85.3 91.4
85.3 91.4
90.4 96.5
90.4 96.5
None
One on right side
None
★
★
★
★
★
★
★
★
★
★
★
★
One at center
YES
One on right and
left sides, resp.
One on right and left sides, resp.
One at center
One on right and left sides, resp.
One at center
One on right and left sides, resp.
One at center
MAX119.7
96.74
MAX119.7
The products marked with
★ comply with MIL standard.
B25
HIF3B Series●Ribbon Cable connector Compliant with MIL Standard
BCombination Pattern
Note : Fix the HIF3-mounting hole spacer by screws between upper stage and lower stage connectors.
BPCB mounting pattern
■Mounting Hole Spacer
Part Number
CL No.
Finish
RoHS
YES
HIF-3 mounting hole spacer 562-0714-4
Note : 2 pieces are contained in a bag.
PBT Black
B26
HIF3B Series●Ribbon Cable connector Compliant with MIL Standard
BPolarizing Key
HIF3B-GK
CL562-0601-8
HIF3-GPIN(A)
HIF3BA-GPIN
Note1: One unit of this
product is a set of five
Note1: One unit of this
product is a set of five
pieces in conjunction
with a runner. The unit
for sale is defined one
pack containing 20
pieces.
pieces in conjunction
with a runner. The unit
for sale is defined one
pack containing 20
pieces.
Note2: This product is
Note2: This product is
applicable to the
applicable to HIF3A-
*D2.54R, HIF3C-
*D2.54C and
HIF3BA-*D2.54R
product.
HIF3BA-*D2.54C
products.
Part Number
HIF3-GPIN(A) 562-0126-6 Poly acetal (white) A set of 5 pieces YES
Part Number
HIF3BA-GPIN 612-0500-2 Poly acetal (white) A set of 5 pieces YES
CL No.
Material
Remarks
RoHS
CL No.
Material
Remarks
RoHS
B27
HIF3B Series●Ribbon Cable connector Compliant with MIL Standard
BHIF3-Multi Clamp
BHIF3-*CL Pull Tab
This clamp is used for intermediate connection in the
bus-line system, etc. Remove compulsory force from the
insulation displacement area of the connector in
This pull tab is used for the HIF3 series equipped with cable clamp
function. Remove all compulsory force, which is loaded on the
insulation displacement area of the connector for extraction.
* Pull Tab can not be used for HIF3BA-*PD.
Note: This HIF3-
intermediate connection.
Note: The pin header corresponds to the HIF3BAE
series (lock E).
Note: The pin header corresponds to the HIF3BAE series (lock E).
BLock
●Low Profile Lock Pin Header
●F Type Lock Pin Header
Lock G
Lock F
Part Number : HIF3BAG-**PA-2.54DSA(71)
Part Number : HIF3BAG-**PA-2.54DSA(71)
●Low profile type, and used for lock ejection.
Connector height is reduced.
Since no connector clamp is needed on the cable side,
this is used without turning back on the cable side. Take
care about this point.
●Locking range more reduced than conventional lock type.
Even if connectors are aligned laterally, the mounting
space is reduced.
Note : The clamp must be replaced for HIF3A socket type
60 contacts only. Take care about this point.
B28
HIF3B Series●Ribbon Cable connector Compliant with MIL Standard
■Socket for Crimping
Unit: mm
Part Number
CL No.
Number of Contacts
A
B
Polarizing Guide RoHS
HIF3BA-10D-2.54C
HIF3BA-14D-2.54C
HIF3BA-16D-2.54C
HIF3BA-20D-2.54C
HIF3BA-26D-2.54C
HIF3BA-30D-2.54C
HIF3BA-34D-2.54C
HIF3BA-40D-2.54C
HIF3BA-50D-2.54C
HIF3BB-50D-2.54C
HIF3BA-60D-2.54C
HIF3BB-60D-2.54C
HIF3BA-64D-2.54C
HIF3BB-64D-2.54C
610-1041-0
610-1051-3
610-1042-2
610-1043-5
610-1044-8
610-1045-0
610-1046-3
610-1047-6
610-1048-9
610-1061-7
610-1049-1
610-1062-0
610-1064-5
610-1063-2
10
14
16
20
26
30
34
40
17.25 10.16
22.35 15.24
24.8
17.78
29.95 22.86
37.55 30.48
42.63 35.56
47.75 40.64
55.35 48.26
One at center
YES
One right and left side, resp.
One at center
60.96
73.66
78.74
50
60
64
68.04
80.77
85.85
One right and left side, resp.
One at center
One right and left side, resp.
One at center
Note: Some variations may differ from those in above figures.
B29
HIF3B Series●Ribbon Cable connector Compliant with MIL Standard
■Cover Case for Crimping socket
Unit: mm
RoHS
Part Number
HIF3-20CV(71)
HIF3-26CV(71)
HIF3-30CV(71)
HIF3-34CV(71)
HIF3-40CV(71)
HIF3-50CV(71)
HIF3-60CV(71)
CL No.
Number of Contacts
A
B
C
D
E
562-0201-0-71
562-0202-2-71
562-0203-5-71
562-0204-8-71
562-0205-0-71
562-0206-3-71
562-0207-6-71
20
26
30
34
40
50
60
24.5
30.2
32.2
34.2
36.2
39.2
42.2
18.0
20.0
22.0
24.0
26.0
29.0
32.0
12.0
14.0
16.0
18.0
20.0
23.0
26.0
30.5
32.0
33.0
33.5
35.5
38.0
40.5
29.95
37.55
42.63
47.75
55.35
68.04
80.77
YES
Note 1: The type F lock pin header cannot be used for a mating member.
Note 2: Note that the product cannot be used with AWG #20.
Applicable jacket diameters are as described below.
20 contacts: 1.7 mm diameter MAX
26 to 40 contacts: 1.6 mm diameter MAX
50 to 60 contacts: 1.4 mm diameter MAX
B30
HIF3B Series●Ribbon Cable connector Compliant with MIL Standard
■Contact for Crimping Socket
RoHS
RoHS
RoHS
gold plated contact in bag
gold plated contact in bag
gold plated contact in bag
HIF3-2022SC 562-0492-4
YES
HIF3-2226SC 562-0079-8
HIF3-2226SCA 562-0244-2
HIF3-2428SC 562-0124-0
HIF3-2428SCA 562-0246-8
YES
YES
Selective gold plated contact in bag
Selective gold plated contact in bag
AWG#20 to #22 UL 1007 Stranded wire
Applicable cable
Manual crimping tool
AWG#22 to #26 UL 1007 Stranded wire
HIF3-T2226HC
AWG#24 to #28 UL 1007 Stranded wire
HIF3-TA2428HC
HIF3-TA2022HC
Applicable cable
Manual crimping tool
Applicable cable
Manual crimping tool
RoHS
RoHS
RoHS
gold plated contact in reel
HIF3-2022SCF 562-0493-7
AWG#20 to #22 UL 1007 Stranded wire
Applicable cable
gold plated contact in reel
gold plated contact in reel
HIF3-2226SCF 562-0080-7
HIF3-2226SCFA 562-0245-5
HIF3-2428SCF 562-0125-3
HIF3-2428SCFA 562-0247-0
YES
YES
YES
Selective gold plated contact in reel
Selective gold plated contact in reel
*
*
AWG#22 to #26 UL 1007 Stranded wire
AWG#24 to #28 UL 1007 Stranded wire
Applicable cable
Applicable cable
Note:* products have both side careers.
Type VA (Selective gold plated in reel)
Applicable Cable
RoHS
F
Part Number
CL No.
A
B
C
D
E
11.5 0.8 1.8 1.8 2.3 2.6
11.5 0.8 1.4 1.35 2.0 2.1 YES
12.4 1.7 1.1 1.1 1.4 1.5
AWG#22 to #26 UL 1007 Stranded wire
AWG#26 to #30 UL 1007 Stranded wire
AWG#32 to #36 UL 1007 Stranded wire
HIF3-2226SCFC 613-0002-1
HIF3-2630SCFC 613-0001-9
HIF3A-3236SCFC 613-0005-0
Type VA (Selective gold plated contact in bag)
Applicable Cable
Manual Crimp Tool
RoHS
F
Part Number
CL No.
A
B
C
D
E
AWG#22 to #26 UL 1007 Stranded wire HIF3-TB2226HC 11.5 0.8 1.8 1.8 2.3 2.6
AWG#26 to #30 UL 1007 Stranded wire HIF3-TB2630HC 11.5 0.8 1.4 1.35 2.0 2.1
HIF3-2226SCC 613-0004-7
HIF3-2630SCC 613-0003-4
YES
B31
HIF3B Series●Ribbon Cable connector Compliant with MIL Standard
BTools
●Crimping Tool
Part Number
CL No.
HIF3-T2226HC
550-0063-8
Manual Crimping Tool HIF3-T2226HC
●Automatic Crimping Tool (Type: CM-105)
Part Number
CM-105
CL No.
901-0005-4
●Contact Extraction Tools
How to use the extraction tool
(2) How to adjust the lance (raise)
(1) How to extract contacts
In order to re-insert the contact
removed from the insulated case,
raise the contact lance area using the
tool A, and re-insert the contact, as
shown in Figure 2.
As shown in Figure 1, where the
extraction tool is inserted in the lance
fixed slot on the insulated case, slightly
pull the cable, and the contact can be
removed.
Part Number
HIF1-PO
CL No.
550-0049-7
Figure 1
B32
HIF3B Series●Ribbon Cable connector Compliant with MIL Standard
Part Number
HIF3-T2226HC
CL No.
Applicable Contact
Applicable Cable
AWG#22 to #26
Type
Item
Manual
Manual crimping tool
HIF3-2226SC
HIF3-2226SCA
550-0063-8
HIF3-2428SC
HIF3-2428SCA
HIF3-TA2428HC
550-0100-2
AWG#24 to #28
HIF3-TA2022HC
HIF3-TB2226HC
HIF3-TB2630HC
CM-105
550-0124-0
550-0154-1
550-0155-4
901-0005-4
AWG#20 to #22
AWG#22 to #26
AWG#26 to #30
HIF3-2022SC
HIF3-2226SCC
HIF3-2630SCC
–––––––
Automatic
Automatic crimping tool unit
Applicator
–––––––
AWG#22 to #26
AWG#24 to #28
AWG#22 to #26
AWG#24 to #28
HIF3-2226SCF
HIF3-2428SCF
HIF3-2226SCFA
HIF3-2428SCFA
AP105-HIF3-22-28SCF
901-4031-6
901-4030-3
(
)
)
Note1
AP105-HIF3-22-28SCFA
(
Note1
AP105-HIF3-2022S
901-4027-9
901-4005-6
901-4006-9
901-4007-1
550-0049-7
HIF3-2022SCF
HIF3-2226SCFC
HIF3-2630SCFC
HIF3-3236SCFC
–––––––
AWG#20 to #22
AWG#22 to #26
AWG#26 to #30
AWG#32 to #36
–––––––
AP105-HIF3-2226SCFC
AP105-HIF3-2630SCFC
AP105-HIF3-3236SCFC
HIF1-PO
Extraction tool
Note1: AP106-HIF3-22-28SCF and AP105-HIF3-22-28CFA can be modified by changing a few parts.
B33
HIF3B Series●Ribbon Cable connector Compliant with MIL Standard
BSocket Side (Crimping) Assembling Procedures
(1) As shown in Figure 1, peel the applicable cable (AWG#20 to #26) jacket, and connect it using crimping jig HIF3-TA2022HC,
HIF3-TA2226HC, or HIF3-TA2426HC. In this case, insert the cable so as to hit the contact cable stripper position as shown
Figure 2.
(2) After connection as shown Figure 2, check the contact direction, and insert the contact as shown Figures 3 and 4. Slightly pull
the cable, and check whether the contact lance position is firmly fixed to the insulation case, as shown in the area (A).
Note1 : For handling procedures for special crimping tools, refer to the "Handling Instruction Manual".
Note2 : Wire strip length: Refer to crimp condition sheet.
Wire strip length
Figure 1
Figure 2
Figure 3
Figure 4
B34
HIF3B Series●Ribbon Cable connector Compliant with MIL Standard
HIF3B Connection Circuit Diagram
Type AB
Type AD
Type CD
B35
HIF3B Series●Ribbon Cable connector Compliant with MIL Standard
Type AC
Type CC
Type AA
B36
HIF3B Series●Ribbon Cable connector Compliant with MIL Standard
HIF2E R(S) A to HIF3B Connection Circuit Diagram
Type AA
Type AC
B37
HIF3B Series●Ribbon Cable connector Compliant with MIL Standard
Type BA
Type BC
B38
HIF3B Series●Ribbon Cable connector Compliant with MIL Standard
HIF2E R(S)B to HIF3 Connection Circuit Diagram
Type AA
Type AC
B39
HIF3B Series●Ribbon Cable connector Compliant with MIL Standard
Type BA
Type BC
B40
HIF3B Series●Ribbon Cable connector Compliant with MIL Standard
HIF3B In-line Type Ribbon Cable Connector
■Features
1. In-line Type
This connector can be used for internal wiring cable to cable within
equipment.
2. Compatibility
This connector is compatible with HIF3A series as well as HIF3B
series socket.
3. Applicable Cable
The applicable cable is UL2651 AWG#28 flat cable
(7 pcs./6.127mm, jacket diameter: 0.8 to 1.0mm).
■Product Specifications
(
)
(
)
Current rating : 1A
Operating Temperature Range
:
–55 to +85ç Note 1 Storage Temperature Range : –10 to +60ç Note 2
Rating
(
)
Voltage rating : 200V AC Operating Moisture Range : 40 to 80%
Storage Humidity Range : 40 to 70% Note 2
Item
Specification
Condition
1. Insulation Resistance 1000M ohms min.
500V DC
2. Withstanding voltage No flashover or insulation breakdown.
650V AC/1 minute
0.1A
3. Contact Resistance
4. Vibration
15m ohms max.
No electrical discontinuity of 1μs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
96 hours at temperature of 40ç and humidity of 90% to 95%
(-65ç: 30 minutes ➝ 15 to 35ç: 5 minutes max.
125ç: 30 minutes ➝ 15 to 35ç: 5 minutes max.) 5 cycles
500 cycles
5. Humidity (Steady state) Insulation resistance: 1000M ohms min.
6. Temperature Cycle No damage, cracks, or parts looseness.
7. Durability (Mating/un-mating) Contact resistance: 15m ohms max.
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Note 3: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a
specific part number shown.
■Material
Part
Material
PBT
Finish
Black
Remarks
UL94V-0
––––––
Insulator
Plug Contact
Beryllium copper
Gold plated over nickel underplated
■Ordering Information
*
w
HIF3BA -
q
P D - 2.54 R - MC
e
r
t
y
u
q Series Name
: HIF3BB (50, 60, 64 contacts only) e P : Plug
HIF3BD (10 contacts only)
HIF3BAE (60 contacts only)
r D : contact alignment : D : Double
t Contact Pitch
: 2.54mm
w
Number of Contacts : 10, 16, 20, 26, 30, 34, 40, 50, 60 y Connection type
: Ribbon cable
: Mold clamp
and 64
u MC
B41
HIF3B Series●Ribbon Cable connector Compliant with MIL Standard
■Plug
Note 1, Note 2: The number of polarizing slot and key installed positions changes according to products.
The 10 contact connector only has no position for polarizing key insulation.
Note 3: The number indicated in parentheses are sizes for 60 and 64 contact connectors.
Note 4: The HIF3BAE-60PD-2.54R-MC product partially differs in a locking form, and the mating member is
applicable for HIF3A only.
Unit:mm
Part Number
CL No.
Number of Contacts
A
B
C
D
28.14
MAX51.1
35.74
MAX58.7
40.84
MAX63.8
48.44
MAX71.4
53.54
MAX76.5
58.64
MAX81.6
66.24
MAX89.2
E
F
G
H
Polarizing slot
One at center
RoHS
HIF3BDE-10PD-2.54R-MC 611-0031-7
HIF3BAE-16PD-2.54R-MC 611-0032-0
HIF3BAE-20PD-2.54R-MC 611-0033-2
HIF3BAE-26PD-2.54R-MC 611-0034-5
HIF3BAE-30PD-2.54R-MC 611-0035-8
HIF3BAE-34PD-2.54R-MC 611-0036-0
HIF3BAE-40PD-2.54R-MC 611-0037-3
HIF3BAE-50PD-2.54R-MC 611-0038-6
HIF3BBE-50PD-2.54R-MC 611-0041-0
HIF3BAE-60PD-2.54R-MC 611-0039-9
HIF3BBE-60PD-2.54R-MC 611-0042-3
HIF3BAE-60PD-2.54R-MC 611-0059-6
HIF3BAE-64PD-2.54R-MC 611-0040-8
HIF3BBE-64PD-2.54R-MC 611-0045-1
10
16
20
26
30
34
40
50
50
60
60
60
64
64
31.98 17.48 10.16
39.60 25.10 17.78
44.68 30.18 22.86
52.30 37.80 30.48
57.38 42.88 35.56
62.46 47.96 40.64
70.08 55.58 48.26
21.88 30.13
29.50 37.75
34.58 42.83
42.20 50.45
47.28 55.53
33.2
52.36 60.61 29.2
59.98 68.23
YES
78.94
MAX101.9
91.64
One on right and left sides, resp.
One at center
82.78 68.28 60.96
95.48 80.98 73.66
100.56 86.06 78.74
72.68 80.93
One on right and left sides, resp.
One at center
35.2
MAX114.6
85.38 93.63
91.7
MAX121.3
31.2 37.2
One on right and left sides, resp.
One at center
96.74
90.46 98.71 29.2 35.2
MAX119.7
locking size
unlocking size
*D size
B42
HIF3B Series●Ribbon Cable connector Compliant with MIL Standard
BConnection Procedures
+10
Note1: Cable length tolerance Less than 500 (mm)
Note2: When a cable such as a twist cable
or a slit (like a roller screen) cable is
used, the cable pitch will change
according to cable manufacturers.
If connection failure has occurred,
please contact Hirose sales.
+00
+3
More than 500 (mm)
+0
Type AO
Type BO
Type CO
Type DO
B43
相关型号:
HIF3BA-34P-2.54W(88)
Board Connector, 34 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Wire Wrap Terminal, Latch, Black Insulator
HRS
HIF3BA-34PA-2.54DS(75)
Board Connector, 34 Contact(s), 2 Row(s), Male, Right Angle, 0.1 inch Pitch, Solder Terminal, Latch, Black Insulator
HRS
HIF3BA-34PA-2.54DSA(71)
Board Connector, 34 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Latch & Eject, Black Insulator, ROHS COMPLIANT
HRS
HIF3BA-34PA-2.54DSA(72)
Board Connector, 34 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Latch, Black Insulator
HRS
HIF3BA-34PA-2.54DSA(75)
Board Connector, 34 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Latch, Black Insulator
HRS
HIF3BA-34PA-2.54WB(71)
Board Connector, 34 Contact(s), 2 Row(s), Male, Right Angle, 0.1 inch Pitch, Solder Terminal, Latch & Eject, Black Insulator, ROHS COMPLIANT
HRS
HIF3BA-40D-2.54C
Board Connector, 40 Contact(s), 2 Row(s), Female, 0.1 inch Pitch, Crimp Terminal, Locking, Black Insulator, Socket, ROHS COMPLIANT
HRS
©2020 ICPDF网 联系我们和版权申明