HIF3MAW-64PA-2.54DSA [HRS]
Board Connector,;
| 型号： | HIF3MAW-64PA-2.54DSA |
| 厂家： | 
HRS |
| 描述： | Board Connector, 连接器 |
| 文件： | 总12页 (文件大小：658K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MIL Compliant Product
HIF3M*W Series
MIL-C-83503
■Features
1. MIL Compliant product
・MIL Compliant product (MIL-C-83503)
・Suited for wide range of applications (both internal
and external connections)
・Mating compatible with HIF3 series
2. UL Certified
・
UL certified connector
3. Mis-Insertion Prevention Mechanism
・
Dual guide systems prevent mis-insertion
1. MIL-compliant guide key (polarizing key) system
The guide system matches the convex shape on
the pin header (polarizing key attached) with the
concave shape on the socket (polarizing key
cavity).
2. Polarizing guide/slot system
The guide system matches the polarizing slot on
the pin header with polarizing guide (mis-insertion
prevention guide) on the socket.
■HIF3M*W Series Products
●Pin header
HIF3M*W
●Socket
HIF3M*W
4. Superior Usability
MIL type pin header
MIL type pin cable socket
・
A wide lock on the pin header and the long depth of
the socket clamp makes push/pull action easier.
The body and the protector of the socket can be
detached, which makes cable assembly operation
easier.
・
Straight type
Right angle type
■Product specification
Rated current 1A
Rated voltage AC200V
Ratings Operating tamperature : -55°C to 85°C (Note 1) Operating humidity range : Relative humidity 85% or less (No condensation)
Storage temperature : -10°C to 60°C (Note 2)
Storage humidity range : 5% to 85% (Note 2)
Items Specifications
1. Insulation resistance 1,000Mø or more
2. Withstand voltage No flashover, breakdown
Conditions
Measured at DC500V
650V AC/1 minute
3. Contact resistance 15mø or less
Measured at 0.1A
4. Vibration resistance No electrical shut-off of 1µs or more
Frequency 10-55Hz, half amplitude 0.75mm, 2 hours in 3-axial directions
5. Moisture resistance Insulation resistance : 1,000Mø or more Temperature 40 2°C, humidity left for ꢀ6 hours in ꢀ0 to ꢀ5%
Temperature -55 5 to 35 125 5 to 35°C
➝
➝
➝
6. Temperature cycle No damage, cracks, or parts looseness.
Time tested for 30
5
30
5 minutes, 5 cycles
➝
➝
➝
7. Push-pull life
Contact resistance : 15mø or less
500 times of push-pull actions
8. Soldering heat
resistance
No deformation of components affecting
performance.
Solder bath : 260°C for 10 seconds
Hand soldering : Temperature of soldering iron 360°C,
Note 1 : Includes temperature rise caused by current flow.
Note 2 : The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature
Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during
transportation.
■Materials / Finish
●Pin header
Parts
Lock
Insulator
Material
PBT
Color / Finish
Black
Remarks
ULꢀ4V-0
Contact part : gold plated 0.15µm MIN.
Dip part : pure tin plated 2µm MIN.
－
－
Contact
Brass
●Socket
Parts
Insulator
Material
PBT
Color processing
Black
Contact part : gold plated 0.15µm MIN.
IDC part : nickel plated 2.5µm MIN.
Remarks
ULꢀ4V-0
－
Contact terminal
Copper alloy
－
1
2016.3
HIF3M*W Series●MIL Compliant Product
Product Number Structure
Refer to the chart below when determining the product specifications from the product number.
Please select from the product numbers listed in this catalog when placing orders.
Pin header (Right angle)
HIF 3 M*W − * PA − 2.54 DS
❶
❷
❸
❹
❺
❻
❼
Pin header (Straight)
HIF 3 M*W − * PA − 2.54 DSA
❶
❷
❸
❹
❺
❻
❼
Socket
HIF 3 M*W − * D − 2.54 R
❶
❷
❸
❹
❺
❻
❼
Series name
Series No.
HIF
3
P : Pin header
❶
❷
Contact style
Contact pitch
Product type
A : Selective gold plated
D : Double
❺
❻
❼
Pin header MAW : Total positions, MBW : 50,60,
64 positions only, MDW : 10 positions only
2.54mm pitch
Contact
alignment
❸
❹
DS : Right angle type
DSA : Straight type
Socket MAW : Total positions, MBW : 50,
60,64 positions only. Equipped with mis-
insertion prevention guide
R : IDC
Number of contacts
10,14,16,20,26,30,34,40,50,60,64
HIF3 Series Mating compatibility Board-to-Board type
Receptacle socket side
Header side
Box type pin header
◆Straight type
HIF3F Series
ꢀHIF3F-*PA-2.54DSA
◆Right angle type
ꢀHIF3F-*PA-2.54DS
Low-profile box type pin header
HIF3FB(C) Series
◆Straight type
ꢀHIF3FB-*PA-2.54DSA
ꢀHIF3FC-*PA-2.54DSA
◆Low-profile box type receptacle
ꢀHIF3FB-*DA-2.54DSA
◆Right angle type
ꢀHIF3FB-*PA-2.54DS
ꢀHIF3FC-*PA-2.54DS
Pin header
HIF3E Series
◆Straight type
ꢀHIF3E-*PA-2.54DSA
◆Right angle type
ꢀHIF3E-*PA-2.54DS
◆Board to board type receptacle (Straight)
ꢀHIF3H*-*DA-2.54DSA
ꢀHIF3HA-*DA-2.54DSA
Pin header
HIF3H Series
ꢀHIF3HB-*DA-2.54DSA
◆Straight type
ꢀHIF3H-*PA-2.54DSA
ꢀHIF3H-*P-2.54W
◆Right angle type
ꢀHIF3H-*PA-2.54DS
Pin header
A1 Series
◆Straight type
ꢀA1-*PA-2.54DSA
◆
Board to board type receptacle (Right angle)
ꢀHIF3H-*DB-2.54DS
◆Right angle type
ꢀA1-*PA-2.54DS
2
HIF3M*W Series●MIL Compliant Product
HIF3 Series Mating Compatibility Wire-to-Board type
Receptacle socket side
Header side
◆Straight type with lock
MIL type pin header
HIF3M*W Series
ꢀ
ꢀ
ꢀ
HIF3MAW-
HIF3MBW-
HIF3MDW-
*
PA-2.54DSA
*
PA-2.54DSA
*
PA-2.54DSA
◆Right angle type with lock
ꢀ
ꢀ
ꢀ
HIF3MAW-
HIF3MBW-
HIF3MDW-
*
PA-2.54DS
*
PA-2.54DS
*
PA-2.54DS
◆Straight type with lock
ꢀHIF3BA-*PA-2.54DSA
ꢀHIF3BB-*PA-2.54DSA
ꢀHIF3BD-*PA-2.54DSA
◆Right angle type with lock
ꢀHIF3BA-*PA-2.54DS
ꢀHIF3BB-*PA-2.54DS
ꢀHIF3BD-*PA-2.54DS
MIL type pin header
HIF3B Series
◆IDC connector
ꢀHIF3MAW-*D-2.54R
ꢀHIF3MBW-*D-2.54R
MIL type F Pin header with lock
HIF3BAF Series
◆Straight type
ꢀHIF3BAF-*PA-2.54DSA
◆Right angle type
ꢀHIF3BAF-*PA-2.54DS
Box type pin header
HIF3F Series
◆Straight type
◆IDC connector
ꢀHIF3A-*D-2.54R
ꢀHIF3B-*D-2.54R
ꢀHIF3BA-*D-2.54R
ꢀHIF3F-*PA-2.54DSA
◆Right angle type
HIF3A-60D-2.54R and MIL type pin
header can be mated only with
HIF3BAE-60PA-2.54DS(A) Allows
mating with other different number
of positions and box type pin
headers of HIF3A Series.
ꢀHIF3F-*PA-2.54DS
Low-profile box type pin header
HIF3FB(C) Series
◆Straight type
ꢀHIF3FB-*PA-2.54DSA
ꢀHIF3FC-*PA-2.54DSA
◆Right angle type
ꢀHIF3FB-*PA-2.54DS
ꢀHIF3FC-*PA-2.54DS
Pin header
HIF3E Series
◆Straight type
ꢀHIF3E-*PA-2.54DSA
◆Right angle type
ꢀHIF3E-*PA-2.54DSA
◆Crimp connector
ꢀHIF3BA-*D-2.54C
Pin header
A1 Series
◆Straight type
ꢀA1-*PA-2.54DSA
◆Right angle type
ꢀA1-*PA-2.54DS
Ribbon cable plug
HIF3B In-line type
◆In-line type
ꢀHIF3BA-*PD-2.54R-MC
3
HIF3M*W Series●MIL Compliant Product
4-wall right angle through hole
・HIF3M*W-**PA-2.54DS
A±0.2
B
ꢀ0
＋0.25
C±0.1
(□0.64)
2.54±0.08
3.81±0.1
1.27±0.1
Polarizing mark
Polarizing key attaching location
(E)
(D)
6.9±0.2
Polarizing slot
4.1±0.15
Recommended PCB Layout
Ｆ±０．１５
Ｃ±０．１
5±0.2
＋0.1
F±0.15
3±0.3
Ø0.8
ꢀ0
２．５４±０．０５
2-Ø2.7±0.15
2-Ø2.7±0.1
(□0.5)
Spacer
G±0.15
2-Ø2.7±0.15
*As the number of polarizing slots and polarizing keys differs for each part, please refer to the table below and the list of
polarization properties in HIF3M*W Series on page 7.
*The spacer moves to the right according to the number of positions.
Unit : mm
No. of
Contacts
Polarizing Polarizing
Part No.
HRS No.
A
B
C
D
E
F
G
RoHS
slot
key
HIF3MAW-10PA-2.54DS 610-3500-6 00
HIF3MDW-10PA-2.54DS 610-3501-9 00
HIF3MAW-14PA-2.54DS 610-3502-1 00
HIF3MAW-16PA-2.54DS 610-3503-4 00
HIF3MAW-20PA-2.54DS 610-3504-7 00
HIF3MAW-26PA-2.54DS 610-3505-0 00
HIF3MAW-30PA-2.54DS 610-3506-2 00
HIF3MAW-34PA-2.54DS 610-3507-5 00
HIF3MAW-40PA-2.54DS 610-3508-8 00
HIF3MAW-50PA-2.54DS 610-3509-0 00
HIF3MBW-50PA-2.54DS 610-3510-0 00
HIF3MAW-60PA-2.54DS 610-3511-2 00
HIF3MBW-60PA-2.54DS 610-3512-5 00
HIF3MAW-64PA-2.54DS 610-3513-8 00
0
1
★
10
32
17.5 10.16 28.14 51.1 21.8 27.9
0
1
14
16
20
26
30
34
40
37.1 22.6 15.24 33.24 56.2 26.9 33
39.6 25.1 17.78 35.74 58.7 29.5 35.5
44.7 30.2 22.86 40.84 63.8 34.5 40.6
52.3 37.8 30.48 48.44 71.4 42.2 48.3
57.4 42.9 35.56 53.54 76.5 47.2 53.3
62.5 48 40.64 58.64 81.6 52.3 58.4
70.1 55.6 48.26 66.24 89.2 59.9 66
★
★
★
★
★
★
★
★
★
★
★
★
★
1
○
2
2 ※
1
50
60
64
82.8 68.3 60.96 78.94 101.9 72.6 78.7
95.5 81 73.66 91.64 114.6 85.3 91.4
100.6 86.1 78.74 96.74 119.7 90.4 96.5
2 ※
1
2 ※
1
HIF3MBW-64PA-2.54DS 610-3514-0 00
*Pitch of polarizing guide is 22.86mm.
★indicates MIL compliant product.
4
HIF3M*W Series●MIL Compliant Product
4-wall straight through hole
・HIF3M*W-**PA-2.54DSA
A±0.2
ꢀ0
＋0.25
B
C±0.1
(□0.64)
2.54±0.08
3.81±0.1
1.27±0.1
Polarizing mark
Polarizing key attaching location
(E)
(D)
6.9±0.2
Polarizing slot
4.1±0.15
Recommended PCB Layout
Ａ
Ｐ
※ ※
(□0.5)
5±0.2
2.54±0.2
F±0.15
Ｃ±０．１
2-Ø2.7±0.15
２．５４±０．０５
2-Ø2.7±0.15
Spacer
G±0.15
*As the number of polarizing slots and polarizing keys differs for each part, please refer to the table below and the list of
polarization properties in HIF3M*W Series on page 7.
*The spacer moves to the right according to the number of positions.
Unit : mm
No. of
Contacts
Polarizing Polarizing
Part No.
HRS No.
A
B
C
D
E
F
G
RoHS
slot
key
HIF3MAW-10PA-2.54DSA 610-3600-0 00
HIF3MDW-10PA-2.54DSA 610-3601-3 00
HIF3MAW-14PA-2.54DSA 610-3602-6 00
HIF3MAW-16PA-2.54DSA 610-3603-9 00
HIF3MAW-20PA-2.54DSA 610-3604-1 00
HIF3MAW-26PA-2.54DSA 610-3505-4 00
HIF3MAW-30PA-2.54DSA 610-3606-7 00
HIF3MAW-34PA-2.54DSA 610-3607-0 00
HIF3MAW-40PA-2.54DSA 610-3608-2 00
HIF3MAW-50PA-2.54DSA 610-3609-5 00
HIF3MBW-50PA-2.54DSA 610-3610-4 00
HIF3MAW-60PA-2.54DSA 610-3611-7 00
HIF3MBW-60PA-2.54DSA 610-3612-0 00
HIF3MAW-64PA-2.54DSA 610-3613-2 00
0
1
★
10
32 17.5 10.16 28.14 51.1 21.8 27.9
0
1
14
16
20
26
30
34
40
37.1 22.6 15.24 33.24 56.2 26.9 33
39.6 25.1 17.78 35.74 58.7 29.5 35.5
44.7 30.2 22.86 40.84 63.8 34.5 40.6
52.3 37.8 30.48 48.44 71.4 42.2 48.3
57.4 42.9 35.56 53.54 76.5 47.2 53.3
62.5 48 40.64 58.64 81.6 52.3 58.4
70.1 55.6 48.26 66.24 89.2 59.9 66
★
★
★
★
★
★
★
★
★
★
★
★
★
1
○
2
2 ※
1
50
60
64
82.8 68.3 60.96 78.94 101.9 72.6 78.7
95.5 81 73.66 91.64 114.6 85.3 91.4
100.6 86.1 78.74 96.74 119.7 90.4 96.5
2 ※
1
2 ※
1
HIF3MBW-64PA-2.54DSA 610-3614-5 00
*Pitch of polarizing guide is 22.86mm.
★indicates MIL compliant product.
5
HIF3M*W Series●MIL Compliant Product
Socket type (IDC, equipped with mis-insertion prevention guide)
・HIF3M*W-**D-2.54R
■A-A
cross section
■B-B
cross section
■Mated diagram
ＡＡ（５：１）
ＢＢ（５：１）
Main body
Protector
Clamp
１．２７±０．１
１．２７±０．１
１．２７±０．１
１．０９±０．３
■Main body
■Protector
■Clamp
A±0.2
Ａ±０．２
Ａ±０．２
Ｂ
Ａ
2.54±0.1
3.81±0.1
Ｂ
１．２７±０．１
Ａ
B±0.1
Ｄ±０．２
Ｃ±０．１
3.8±0.2
（３．５）
Lot No. Indication
（１．０５）
Ｃ±０．１５
（２．３）
（４．５）
(2.3)
(3.5)
１．２７±０．１
*As the number of polarizing guides and polarizing keyways differs for each part, please refer to the table below and the list of
polarization properties in HIF3M*W Series on page 7.
Unit : mm
No. of
Contacts
Polarizing Polarizing
Part No.
HRS No.
A
B
C
D
RoHS
guide
keyway
HIF3MAW-10D-2.54R
HIF3MAW-14D-2.54R
HIF3MAW-16D-2.54R
HIF3MAW-20D-2.54R
HIF3MAW-26D-2.54R
HIF3MAW-30D-2.54R
HIF3MAW-34D-2.54R
HIF3MAW-40D-2.54R
HIF3MAW-50D-2.54R
HIF3MBW-50D-2.54R
HIF3MAW-60D-2.54R
HIF3MBW-60D-2.54R
HIF3MAW-64D-2.54R
HIF3MBW-64D-2.54R
610-3002-9
610-3003-1
610-3004-4
610-2097-0
610-3005-7
610-2098-2
610-2099-5
610-2100-2
610-2101-5
610-2114-7
610-2102-8
610-2115-0
610-3006-0
610-0013-0
10
14
16
20
26
30
34
40
17.27
22.35
24.89
29.97
37.59
42.67
47.75
55.37
10.16
15.24
17.78
22.86
30.48
35.56
40.64
48.26
11.43
16.51
19.05
24.13
31.75
36.83
41.91
49.53
12.8
17.88
20.42
25.5
33.12
38.2
1
★
★
★
★
★
★
★
★
★
★
★
★
★
1
43.28
50.9
○
2
2 ※
1
2 ※
1
2 ※
1
50
60
64
68.07
80.77
85.85
60.96
73.66
78.74
62.23
74.93
80.01
63.6
76.3
81.38
*Pitch of polarizing guide is 22.86mm.
★indicates MIL compliant product.
●Applicable cable
Conductor size (number of cores)
28 AWG Flat Cable (7pcs./0.127mm) <UL2651>
Jacket
0.9 0.1mm
◆Applicable IDC tool
Type
Part No.
HRS No.
550-0082-2
550-0156-7
550-0133-1
IDC Connection
Guide plate
HIFLEX Connection HHP502
HIF3-GPA2
Pressure bIock
HIF1 Pressure Block A-01
*Common to all No. of Contacts.
*Please refer to p.10 for the description on connection.
6
HIF3M*W Series●MIL Compliant Product
Polarizing guide/slot : Mating combination
Compatible Mating
Combinations
10 pos.
◆Pin header
◆Socket
・HIF3MAW-10D-2.54R
・HIF3MDW-10PA-2.54DS(A)
ꢀNumber of polarizing guides 1 = Number of polarizing slots 1
50 to 64 pos.
◆Pin header
◆Socket
・HIF3MAW-**D-2.54R
・HIF3MAW-**PA-2.54DS(A)
ꢀNumber of polarizing guides 2 = Number of polarizing slots 2
50 to 64 pos.
◆Pin header
◆Socket
・HIF3MBW-**D-2.54R
・HIF3MBW-**PA-2.54DS(A)
ꢀNumber of polarizing guides 1 = Number of polarizing slots 1
Incompatible Mating
Combinations
10 pos.
◆Pin header
◆Socket
・HIF3MAW-10D-2.54R
・HIF3MAW-10PA-2.54DS(A)
ꢀNumber of polarizing guides 1 ≠ Number of polarizing slots 0
Polarizing
guide
50 to 64 pos.
◆Pin header
◆Socket
・HIF3MAW-*D-2.54R
・HIF3MBW-*PA-2.54DS(A)
ꢀNumber of polarizing guides 2 ≠ Number of polarizing slots 1
Polarizing
guide
Polarizing
slot
50 to 64 pos.
◆Pin header
◆Socket
・HIF3MBW-*D-2.54R
・HIF3MAW-*PA-2.54DS(A)
ꢀNumber of polarizing guides 1 ≠ Number of polarizing slots 2
Polarizing
guide
Polarizing
slot
8
HIF3M*W Series●MIL Compliant Product
HIF3M*W-**D-2.54R Connection circuit diagram
The following is the connection circuit diagram of cable-connected HIF3M*W-**D-2.54R.
…Polarizing mark position
Cable mark
Cable mark
A-A connection
A-B connection
Cable mark
Cable mark
Cable mark
Cable mark
A-C connection
A-D connection
Cable mark
Cable mark
C-C connection
C-D connection
Cable mark
Cable mark
Cable mark
Cable mark
9
HIF3M*W Series●MIL Compliant Product
How to assemble the socket side (IDC)
IDC press method : Dedicated tools as shown below are required for connection press of cables.
IDC press
HIFLEX Connection press HHP502
(550-0082-2)
Pressure block
HIF1 Pressure block A-01
(550-0133-1)
Guide plate
HIF3-GPA2
（550-0156-7）
1. Place the protector on the guide plate.
Stopper
2. Place the cable on the top of the protector.
Cable
(Side view)
Protector
Protector
(Ground plan)
3. Place the socket body on the top of the cable.
Stopper
4. Depress the handle to terminate the socket
body and the cable.
Protector
Socket body
Polarizing mark
Socket body
Cable
Cable
(Ground plan)
5. In order to enhance the connection reliability,
fold back the cable and press down the clamp.
6. Pull the cable and eliminate deflection.
Clamp
Polarizing mark
Cable
Protector
Socket body
*For details on cable connection and applicable termination tools, see "HIF Series Ribbon Cable Connection Instruction Manual".
*HIF3M*W Series can be assembled by using the same tools with HIF Series.
10
HIF3M*W Series●MIL Compliant Product
MEMO：
11
HIF3M*W Series●MIL Compliant Product
USA:
USA:
USA:
HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS CHICAGO OFFICE HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE)
2300 Warrenville Road, Suite 150,
Downers Grove, IL 60515
Phone : +1-630-282-6700
http://www.hirose.com/us/
2841 Junction Ave, Suite 200
San Jose, CA. 95134
Phone : +1-408-253-9640
Fax : +1-408-253-9641
http://www.hirose.com/us/
17197 N. Laurel Park Drive, Suite 253,
Livonia, MI 48152
Phone : +1-734-542-9963
Fax : +1-734-542-9964
http://www.hirose.com/us/
THE NETHERLANDS:
GERMANY:
GERMANY:
HIROSE ELECTRIC EUROPE B.V.
Hogehillweg #8 1101 CC Amsterdam Z-O
Phone : +31-20-6557460
Fax : +31-20-6557469
HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH HIROSE ELECTRIC EUROPE B.V. NUREMBERG OFFICE
Herzog-Carl-Strasse 4 D-73760 Ostfildern
(Scharnhauser Park)
Phone : +49-711-4560-02-1
Fax : +49-711-4560-02-299
http://www.hirose.com/eu/
Neumeyerstrasse 22-26, 90411 Nurnberg
Phone : +49-911 32 68 89 63
Fax : +49-911 32 68 89 69
http://www.hirose.com/eu/
http://www.hirose.com/eu/
GERMANY:
FRANCE:
UNITED KINGDOM:
HIROSE ELECTRIC EUROPE B.V. HANOVER OFFICE
Bayernstr. 3, Haus C 30855 Langenhagen, Germany Regus La Garenne Colombes,Place de La Belgique,
HIROSE ELECTRIC EUROPE B.V. PARIS OFFICE
HIROSE ELECTRIC EUROPE BV (UK BRANCH)
4 Newton Court, Kelvin Drive, Knowlhill,
Phone : +49-511 97 82 61 30
Fax : +49-511 97 82 61 35
http://www.hirose.com/eu/
71 Boulevard National La Garenne Colombes, 92250, France Milton Keynes, MK5 8NH
Phone : +33 (0) 1 7082 3170
Fax : +33 (1) 7082 3101
Phone : +44-1908 202050
Fax : +44-1908 202058
http://www.hirose.com/eu/
http://www.hirose.com/eu/
CHINA:
CHINA:
CHINA:
HIROSE ELECTRIC (SHANGHAI) CO., LTD.
HIROSE ELECTRIC (SHANGHAI) CO.,LTD. BEIJING BRANCH HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD.
1601, Henderson Metropolitan, NO.300, East Nanjing A1001, Ocean International Center, Building 56# East 4th Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre,
Road, Huangpu District, Shanghai, China 200001
Phone : +86-21-6391-3355
Fax : +86-21-6391-3335
Ring Middle Road, ChaoYang District, Beijing, 100025
Phone : +86-10-5165-9332
Fax : +86-10-5908-1381
5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 518008
Phone : +86-755-8207-0851
Fax : +86-755-8207-0873
http://www.hirose.com/cn/
http://www.hirose.com/cn/
http://www.hirose.com/cn/
HONG KONG:
TAIWAN:
KOREA:
HIROSE ELECTRIC HONGKONG TRADING CO., LTD. HIROSE ELECTRIC TAIWAN CO., LTD.
Room 1001, West Wing, Tsim Sha Tsui Centre, 66 103 8F, No.87, Zhengzhou Rd., Taipei
Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong Phone : +886-2-2555-7377
HIROSE KOREA CO., LTD.
250, Huimanggongwon-ro, Siheung-si,
Gyeonggi-do, Korea, 429-849
Phone : +82-31-496-7000,7124
Fax : +82-31-496-7100
Phone : +852-2803-5338
Fax : +852-2591-6560
Fax : +886-2-2555-7350
http://www.hirose.com/tw/
http://www.hirose.com/hk/
http://www.hirose.co.kr/
SINGAPORE:
INDIA:
INDIA:
HIROSE ELECTRIC SINGAPORE PTE. LTD.
HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE
10 Anson Road #26-16, International Plaza Office NO.552, Regus-Green Boulevard, Level5, Tower C, Unit No-403, 4th Floor, No-84, Barton Centre, Mahatma
079903, Singapore
Sec62, Plot B-9A, Block B, Noida, 201301, Uttar Pradesh, India Gandhi (MG) Road, Bangalore 560 001, Karnataka, India
Phone : +65-6324-6113
Phone : +91-12-660-8018
Fax : +91-120-4804949
http://www.hirose.com/sg/
Phone : +91-80-4120 1907
Fax : +91-80-4120 9908
http://www.hirose.com/sg/
65-6324-6123
Fax : +
http://www.hirose.com/sg/
MALAYSIA:
THAILAND:
PENANG REPRESENTATIVE OFFICE
BANGKOK OFFICE (REPRESENTATIVE OFFICE)
1-21-01, Suntech @ Penang Cybercity (1164), Lintang Unit 4703, 47th FL., 1 Empire Tower, South Sathorn
Mayang Pasir 3,11950, Bayan Baru, Penang, Malaysia. Road, Yannawa, Sathorn, Bangkok 10120 Thailand
Phone : +604-619-2564
Fax : +604-619-2574
Phone : +66-2-686-1255
Fax : +66-2-686-3433
http://www.hirose.com/sg/
http://www.hirose.com/sg/
®
2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
+
+
TEL: 81-45-620-3526 Fax: 81-45-591-3726
http://www.hirose.com
http://www.hirose-connectors.com
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.
The contents of this catalog are current as of date of 03/2016. Contents are subject to change without notice for the purpose of improvements.
12
相关型号：
HIF4
Board Connector, Female; Male, Right Angle; Straight, IDC; Solder; Wire Wrap Terminal, Socket
HRS
HIF4-20D-3.18R(01)
Board Connector, 20 Contact(s), 2 Row(s), Female, 0.125 inch Pitch, IDC Terminal, Locking, Black Insulator
HRS
©2020 ICPDF网 联系我们和版权申明