HIF4A-24P-3.18DS [HRS]
Board Connector;
| 型号： | HIF4A-24P-3.18DS |
| 厂家： | 
HRS |
| 描述： | Board Connector 连接器 |
| 文件： | 总7页 (文件大小：704K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Ribbon Cable Connector
HIF4 Series
■Features
1. Current Capacity
The HIF4 series connector is capable of 3 A current capacity used
for wider applications, while the HIF3 series uses 1 A capacity.
2. Full Lock Mechanism
This connector is equipped with a Hirose original locking
mechanism, and guarantees excellent reliability for vibration and
shock.
3. One-touch Insertion and Extraction Mechanism
This connector is equipped with levers for automatic insertion and
extraction, as soon as lock is reset. Insertion and extraction tools
are not required.
4. Applicable Cable
The applicable cable is UL2651 AWG#24 flat cable (7
cores./0.203mm, jacket dia :1.0 to 1.2mm).
■Applications
Computers, terminal equipment, various kinds of electronic equipment, and office automation machines
■Product Specifications
(
)
(
)
Current rating : 3A
Operating Temperature Range
:
–55 to +85ç Note 1 Storage Temperature Range : –10 to +60ç Note 2
Rating
(
)
Voltage rating : 300V AC Operating Moisture Range : 40 to 80%
Storage Humidity Range : 40 to 70% Note 2
Item
Specification
Condition
1. Insulation Resistance 1000M ohms min
500V DC
2. Withstanding voltage No flashover or insulation breakdown.
1000V AC/1 minute
0.1A
3. Contact Resistance
4. Vibration
15m ohms max
No electrical discontinuity of 1µs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
96 hours at temperature of 40ç and humidity of 90% to 95%
(-65ç: 30 minutes ■■15 to 35ç: 5 minutes max.
125ç: 30 minutes ■ 15 to 35ç: 5 minutes max.) 5 cycles
500 cycles
5. Humidity (Steady state) Insulation resistance: 1000M ohms min.
6. Temperature Cycle
7. Operating Life
No damage, cracks, or parts looseness.
Contact resistance: 15m ohms max.
Solder bath: 260ç for 10 seconds
8. Resistance to Soldering heat No deformation of components affecting performance.
Manual soldering: 360ç for 5 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Note 3: Information contained in this catalog represents general requirements for this Series.Contact us for the drawings and specifications for
a specific part number shown.
Note 4: Please note that there is a risk of deforming the lock when an excessive load is applied to the inside.
■Material
Part
Material
PBT
Finish
Remarks
UL94V-0
Insulator
Black
Socket
Beryllium copper
Phosphor bronze
Gold plated over nickel underplating
Gold plated over nickel underplating
Contact
–––––––
Pin header
B2
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
HIF4 Series■Ribbon Cable Connector
■Ordering Information
■Pin Header
*
w
HIF4 -
q
P - 3.18 DS
e
r
t
q Series Name
: HIF4
w Number of Contacts : 16, 20, 26, 34, 40
e Contact alignment
r Contact Pitch
: P : Pin header
: 3.18mm
t Contact Type
DS : Right angle type
SA : Straight dip type
W : Wrapping type
■Socket
*
w
HIF4 -
q
D - 3.18 R
e
r
t
q Series Name
: HIF4
w Number of Contacts : 16, 20, 26, 34, 40
e Contact alignment
r Contact Pitch
: D : Double
: 3.18mm
t Connection type
: Ribbon cable
B3
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
HIF4 Series■Ribbon Cable Connector
■Socket
Unit:mm
Part Number
CL No.
Number of Contacts
A
B
C
RoHS
HIF4-16D-3.18R
HIF4-20D-3.18R
HIF4-26D-3.18R
HIF4-34D-3.18R
HIF4-40D-3.18R
563-0025-5
563-0010-8
563-0011-0
563-0012-3
563-0029-6
16
20
26
34
40
31.98
38.34
47.88
60.60
70.14
22.26
28.62
38.16
50.88
60.42
26.28
32.64
42.18
54.90
64.44
YES
■Pin Header Right Angle Type
Unit:mm
RoHS
Part Number
CL No.
Number of Contacts
A
B
C
D
E
F
42.82
63.28
49.18
69.64
58.72
79.18
71.44
91.90
80.89
101.44
HIF4-16P-3.18DS
HIF4-20P-3.18DS
HIF4-26P-3.18DS
HIF4-34P-3.18DS
HIF4-40P-3.18DS
563-0026-8
563-0001-7
563-0002-0
563-0003-2
563-0030-5
16
20
26
34
40
46.68
53.04
62.58
75.30
84.84
32.18
38.54
48.08
60.80
70.34
22.26
28.62
38.16
50.88
60.42
39.98
46.34
55.88
68.60
78.14
33.58
39.94
49.48
62.20
71.74
YES
B4
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
HIF4 Series■Ribbon Cable Connector
■Pin Header Straight Through hole Type
Unit:mm
Part Number
CL No.
Number of Contacts
A
B
C
D
E
F
RoHS
42.82
63.28
49.18
69.64
58.72
79.18
71.44
91.90
80.98
101.44
HIF4-16P-3.18DSA 563-0027-0
HIF4-20P-3.18DSA 563-0004-5
HIF4-26P-3.18DSA 563-0005-8
HIF4-34P-3.18DSA 563-0006-0
HIF4-40P-3.18DSA 563-0031-8
16
20
26
34
40
46.68
53.04
62.58
75.30
84.84
32.18
38.54
48.08
60.80
70.34
22.26
28.62
38.16
50.88
60.42
39.98
46.34
55.88
68.60
78.14
33.58
39.94
49.48
62.20
71.74
YES
■Pin Header Wrapping Type
Unit:mm
RoHS
Part Number
CL No.
Number of Contacts
A
B
C
D
E
F
42.82
63.28
49.18
69.64
58.72
79.18
71.44
91.90
80.98
101.44
HIF4-16P-3.18W
HIF4-20P-3.18W
HIF4-26P-3.18W
HIF4-34P-3.18W
HIF4-40P-3.18W
563-0028-3
563-0007-3
563-0008-6
563-0009-9
563-0032-0
16
20
26
34
40
46.68
53.04
62.58
75.30
84.84
32.18
38.54
48.04
60.80
70.34
22.26
28.62
38.16
50.88
60.42
39.98
46.34
55.88
68.60
78.14
33.58
39.94
49.48
62.20
71.74
YES
B5
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
HIF4 Series■Ribbon Cable Connector
BPCB mounting pattern
■Pin Header Right Angle Type
Number of Contacts
A
B
16
20
26
34
40
22.26
28.62
38.16
50.88
60.42
33.58
39.94
49.48
62.20
71.74
■Pin Header Straight Through hole Type or Pin Header Wrapping Type
Number of Contacts
A
B
16
20
26
34
40
22.26
28.62
38.16
50.88
60.42
39.98
46.34
55.88
68.60
78.14
■Type Shape
DS type
DSA type
W type
B6
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
HIF4 Series■Ribbon Cable Connector
As shown below in Figure 1, contact positions are
indicated by marks (K■■■).
BHIF4 Basic Connection Method
Fig.1
The connected contact is indicated with a symbol next to
the individual type name. However, the contact symbol
connected to the cable mark is indicated at the mark *.
Type AB
Type AO
Type A side Type B side
*
K mark and K mark
K mark and ■ mark
Type BO
Type AD
A side
D side
*
K mark and K mark
K mark and ■ mark
Type CO
Type CD
C side
D side
*
K mark and K mark
K mark and ■ mark
Type DO
B7
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
HIF4 Series■Ribbon Cable Connector
Contact positions are designated with marks as shown below.
According to the illustration on
the left, the illustration 1 indicates
these positions on the right.
Note 1: Cable length tolerance
500 +10, 0 max. (mm)
500 +3%, 0% min.
Note 2.When a twist cable or a slit (like a
roller screen) cable is used, the
cable pitch will change according
to cable manufacturers. If
connection failure has occurred,
consult HRS Sales Department.
Type AC
A side
C side
*
K mark and K mark
K mark and K mark
Type CC
C side
C side
*
K mark and K mark
K mark and K mark
Type AA
A side
A side
*
K mark and K mark
K mark and K mark
B8
相关型号：
HIF4A-24P-3.18DS(01)
Board Connector, 24 Contact(s), 2 Row(s), Male, Right Angle, 0.125 inch Pitch, Solder Terminal, Hole .099-.111, Black Insulator
HRS
HIF5B-20DA-2.54R(71)
Card Edge Connector, 20 Contact(s), 2 Row(s), Female, IDC Terminal, ROHS COMPLIANT
HRS
HIF5B-26DA-2.54R(71)
Card Edge Connector, 26 Contact(s), 2 Row(s), Female, IDC Terminal, ROHS COMPLIANT
HRS
HIF5B-40DA-2.54R(71)
Card Edge Connector, 40 Contact(s), 2 Row(s), Female, IDC Terminal, ROHS COMPLIANT
HRS
©2020 ICPDF网 联系我们和版权申明