HR08D-12WLPK-2S [HRS]
Small, Waterproof, Push-On Bayonet Lock Connectors;型号: | HR08D-12WLPK-2S |
厂家: | HRS |
描述: | Small, Waterproof, Push-On Bayonet Lock Connectors |
文件: | 总6页 (文件大小:497K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Small, Waterproof, Push-On Bayonet Lock Connectors
HR08D Series
Push-On Bayonet Lock
⬆
⬆
Mating is completed simply
by pushing the plug onto the
receptacle.
To unmate this connector,
rotate the locking collar to
release the lock, then pull
them apart.
Features
1. Simplified mating operations
■
Fig.q
•To mate the connector, simply push it onto the
receptacle. To unmate, rotate the locking collar
and pull the plug back from the receptacle.
(Fig. q)
Cable exit directions
•Simplified mating is enabled by the alignment
markings
•Mating guide keys are provided at 3 points to
prevent contact damage. They also provide the
ability to blind mate these connectors when needed.
Plug connector does not damage the receptacle
contacts.
2. Waterproof structure
Supports IP67 and IP68 ratings while in the mated
condition. (Ratings explained below*)
*IP67: Submerged in 1 m for 30 minutes
*IP68: Submerged in 2 m for 14 days
Fig.w
3. Adjustable cable direction
The right angle plug can be adjusted to mount in
any of the 8 different directions (adjustable in 45°
increments). (Fig. w)
4. Variations available
Items
No. of Contacts
2 or 10 positions available
Connector Type
Straight Plug, Right Angle Plug, Receptacle (10 pos. only)
Plug Termination
Receptacle Termination
Cord Tube Material
Crimp, solder
Solder
Plastic, metal
Cable Diameter Range
(Reference)
5.7 to 6.5
(Ø
6.5 to 7.3
8.0 to 9.0
)(Ø
)(Ø
)
In cases where the application will demand a high level of reliability, such as automotive,
please contact a company representative for further information.
1
2018.7
②
HR08D Series●Small, Waterproof, Push-On Bayonet Lock Connectors
Product Specifications
■
Rated Current
Rated Voltage
3A
Operating Temperature Range -20ç to +85ç
Storage Temperature Range -10ç to +60ç
Ratings
AC200V, DC250V
Items
Specifications
Conditions
1. Contact Resistance
20mø or below
Measured with DC 1A
2.Insulation Resistance Minimum of 1,000Mø
Measured with DC 500V
3. Withstanding Voltage No flashover or breakdown
10 pos. AC 900V for 1 minute 2 pos. AC 1,500V for 1 minute
Tested in 3 directions with 10 to 500Hz /cycle, total
vibration width of 0.75mm, and 98m/s2, 3 hours each.
Tested in 3 directions with the acceleration of 490m/s2,
and a duration of 11ms, 3 times each
No electrical discontinuity of 10µs or
greater
4. Vibration Resistance
No electrical discontinuity of 10µs or
greater
5. Shock
6. Durability
Contact Resistance : Maximum of 30m
ø
500 mating cycles
Left at 55ç : 30 minutes
Ordinary temperature : 2 to 3
⇒
-
7. Temperature Cycles
Insulation Resistance : Minimum of 500Mø minutes
85ç : 30 minutes
Ordinary temperature : 2 to
⇒
⇒
3 minutes, 2 to 3 minutes, Total of 5 cycles
Left at temperature 71ç and humidity 95% for 336 hours.
Left at the temperature of 71ç and 95% humidity for 336
hours.
Insulation resistance
8. Humidity Resistance Minimum of 50M (high humidity)
Minimum of 500M (dry)
ø
ø
Should be no water leakage inside the Left submerged in water at the depth of 1m, for 0.5 hours,
connector in the mated condition.
9. Waterproof Structure
Materials / Finish
■
●Plug
Component
Outer Shell
Insulator
Female Contact
O Ring, Gasket
Materials
Finish
Nickel under plating
----------------------
Gold plating
Remarks
----------------------
UL94V-0
----------------------
----------------------
Zinc Alloy, aluminum alloy and polyamide resin (black)
PPS resin (black)
Phosphorous bronze
NBR, Nitrile hydride rubber
----------------------
●Receptacle
Component
Outer Shell
Insulator
Male Contact 10 position
O Ring
Materials
Zinc alloy
PPS resin (black)
Brass
Finish
Nickel under plating
----------------------
Gold plating
Remarks
----------------------
UL94V-0
----------------------
----------------------
NBR
----------------------
Product Number Structure
■
Refer to the chart below when determining the product specifications from the product number.
Please select from the product numbers listed in this catalog when placing orders.
●Plug
● Receptacle
HR08D 12 WP A - 10 S (**)
HR08D 12 WR - 10 P (**)
❶
❷
❸
❹
❺
❻
❼
❶
❷
❸
❹
❺
❻
Model Name : HR08D series
Shell Size : Diameter (mm) of the mating interface of the plug
Shell Type
WP : Straight plug, WLP: Right angle plug
Cord Tube and Cable Range Type
A : Material of cord tube : Metal, with cable dia. range of ( 5.7 to 6.5)
B : Material of cord tube : Metal, with cable dia. range of ( 6.5 to 7.3)
M : Material of cord tube : Plastic, with cable dia. range of ( 5.7 to 6.5)
❶
❷
❸
Model Name : HR08D series
❶
❷
❸
❹
❺
Shell Size : Diameter (mm) of the mating interface of the plug
Shell Type WR Receptacle
ꢀ
:
Number of Contacts : Contacts available (10 only)
Contact Shape P : Male contact for solder termination
❹
Ø
❻ Other specifications :
Ø
A two-digit character is added to indicate other
specifications as needed.
Ø
Ø
N : Material of cord tube : Plastic, with cable dia. range of ( 6.5 to 7.3)
K : Material of cord tube : Metal, with cable dia. range of ( 8.0 to 9.0)
Ø
Number of Contacts : Contacts available (2 or 10)
Contact Shape
S : Female contact for solder termination
SC : Female contact for crimping termination
❼ Other specifications :
❺
❻
●Crimp contact
HR34B - SC1 - 2 1 1
❶
❷
❸
❹
❺
A two-digit character is added to indicate other
specifications as needed.
Model Name : HR34B series (Shares the same contacts
as the HR34B series)
❶
Contact Type SC1 : Female contact
Contact Shape 1 : Single contact 2 : Reel contact
Barrel Shape : 1 : 20 to 25 AWG
❷
❸
❹
❺
Plating Type 1 : Gold plating
2
HR08D Series●Small, Waterproof, Push-On Bayonet Lock Connectors
Straight plug
■
●Regular version ( Cord tube material : Plastic)
49.1
(example)
◆Solder termination version
Applicable cable
diameter range
(Reference)
Contact solder cup inner
diameter
Part No.
HRS No.
A
HR08D-12WPM-10S(31)
HR08D-12WPN-10S(31)
HR08D-12WPM-2S(31)
HR08D-12WPN-2S(31)
108-0274-5 31
108-0275-8 31
108-0272-0 31
108-0266-7 31
7.4
Ø
8.5
Ø
7.4
Ø
8.5
Ø
5.7 to 6.5
6.5 to 7.3
5.7 to 6.5
6.5 to 7.3
(Ø
(Ø
(Ø
(Ø
)
)
)
)
1
Ø
1.8
Ø
◆ Crimp termination version
Applicable cable
diameter range
(Reference)
Part No.
HRS No.
A
HR08D-12WPM-10SC(31)
HR08D-12WPN-10SC(31)
108-0268-2 31
108-0269-5 31
7.4
8.5
5.7 to 6.5
Ø
(Ø
(Ø
)
)
6.5 to 7.3
Ø
●Robust version (Cord tube material: Metal)
◆Solder termination version
Applicable cable
diameter range
(Reference)
Contact solder cup inner
diameter
Part No.
HRS No.
A
HR08D-12WPA-10S(31)
HR08D-12WPB-10S(31)
HR08D-12WPK-10S(31)
HR08D-12WPA-2S(31)
HR08D-12WPB-2S(31)
HR08D-12WPK-2S(31)
108-0219-7 31
108-0231-2 31
108-0262-6 31
108-0279-9 31
108-0280-8 31
108-0281-0 31
7.4
Ø
8.5
Ø
9.5
Ø
7.4
Ø
8.5
Ø
9.5
Ø
5.7 to 6.5
6.5 to 7.3
8.0 to 9.0
5.7 to 6.5
6.5 to 7.3
8.0 to 9.0
(Ø
(Ø
(Ø
(Ø
(Ø
(Ø
)
)
)
)
)
)
1
Ø
1.8
Ø
◆Crimp termination version
Applicable cable
diameter range
(Reference)
Part No.
HRS No.
A
HR08D-12WPA-10SC(31)
HR08D-12WPB-10SC(31)
HR08D-12WPK-10SC(31)
108-0220-6 31
108-0232-5 31
108-0263-9 31
7.4
Ø
8.5
Ø
9.5
Ø
5.7 to 6.5
6.5 to 7.3
8.0 to 9.0
(Ø
(Ø
(Ø
)
)
)
3
HR08D Series●Small, Waterproof, Push-On Bayonet Lock Connectors
Right angle plug
■
●Regular version ( Cord tube material : Plastic)
1
3
4
7
10
8
B
A
(example)
◆Solder termination version
Applicable cable
diameter range
(Reference)
Contact solder cup
inner diameter
Part No.
HRS No.
A
B
HR08D-12WLPM-10S(31)
HR08D-12WLPN-10S(31)
HR08D-12WLPM-2S(31)
HR08D-12WLPN-2S(31)
108-0276-0 31
108-0277-3 31
108-0273-2 31
108-0267-0 31
Ø7.4
Ø8.5
Ø7.4
Ø8.5
(Ø5.7 to 6.5)
(Ø6.5 to 7.3)
(Ø5.7 to 6.5)
(Ø6.5 to 7.3)
Ø1
30.85
Ø1.8
◆Crimp termination version
Applicable cable
diameter range
(Reference)
Part No.
HRS No.
A
B
HR08D-12WLPM-10SC(31) 108-0270-4 31
HR08D-12WLPN-10SC(31) 108-0271-7 31
Ø7.4
Ø8.5
(Ø5.7 to 6.5)
(Ø6.5 to 7.3)
30.85
●Robust version (Cord tube material: Metal)
◆Solder termination version
Applicable cable
diameter range
(Reference)
Contact solder cup
inner diameter
Part No.
HRS No.
A
B
HR08D-12WLPA-10S(31)
HR08D-12WLPB-10S(31)
HR08D-12WLPK-10S(31)
HR08D-12WLPA-2S(31)
HR08D-12WLPB-2S(31)
HR08D-12WLPK-2S(31)
108-0221-9 31
108-0233-8 31
108-0264-1 31
108-0282-3 31
108-0283-6 31
108-0284-9 31
Ø7.4
Ø8.5
Ø9.5
Ø7.4
Ø8.5
Ø9.5
(Ø5.7 to 6.5)
(Ø6.5 to 7.3)
(Ø8.0 to 9.0)
(Ø5.7 to 6.5)
(Ø6.5 to 7.3)
(Ø8.0 to 9.0)
30.5
31.5
30.5
31.5
Ø1
Ø1.8
◆Crimp termination version
Applicable cable
diameter range
(Reference)
Part No.
HRS No.
A
B
HR08D-12WLPA-10SC(31)
HR08D-12WLPB-10SC(31)
HR08D-12WLPK-10SC(31)
108-0222-1 31
108-0234-0 31
108-0265-4 31
Ø7.4
Ø8.5
Ø9.5
(Ø5.7 to 6.5)
(Ø6.5 to 7.3)
(Ø8.0 to 9.0)
30.5
31.5
4
HR08D Series●Small, Waterproof, Push-On Bayonet Lock Connectors
Receptacle
■
◆Solder termination version
A
B
Contact solder cup inner
Part No.
HRS No.
108-0218-4 31
A
B
diameter
Ø1.1
HR08D-12WR-10P(31)
17.26
23.4
Note : The number 10 contact is connected to the outer shell, which provides the ground connection.
BPanel Mount Hole Dimensions
Dimension
HR08D-12WR-10P(31)
17.26 0.05
A
B
C
D
E
M3×0.5
1
ꢀ
0/ 0.1
ー
12.2 +0.1/0
ꢀ
16.2 +0.1/0
ꢀ
A
φD
φE
Crimp contact
■
●Female contact
15
Applicable electric
Type
Part No.
HRS No.
wires
Loose piece contact
Reel contact
HR34B-SC1-111
HR34B-SC1-211
134-0051-7
134-0050-4
20 to 25 AWG
Note : The loose piece contacts are sold in packs of 100. Reel contacts are sold in full reel quantities
of 10,000 pieces per reel.
5
HR08D Series●Small, Waterproof, Push-On Bayonet Lock Connectors
Plug Contact Diagram
B
2 position version
10 position version
1
2
3 2 1
7 6 5 4
10 9 8
Note : The numbering of the contact is from the
plug termination side.
Applicable Tools
B
Tools
Part No.
HT304/HR34B-1
HRS No.
150-0107-9
901-0001-0
Applicable contacts
HR34B-SC1-111 20 AWG
Applicable wire size
AWG AWG
Manual Crimping Tool
Automatic Crimping Press
Automatic Crimping
Applicator
、23
、25
CM-105C
HR34B-SC1-211
20 to 25 AWG
----------------------
AP105-HR34B-1
901-2051-2
150-0039-0
HR34B-SC1-111
HR34B-SC1-211
Contact Extraction Tool
RP6-SC-TP
Manual Crimping Tool
B
BAutomatic Crimping Press CM-105C Model
(applicator sold separately)
Contact Extraction Tool
B
Operating Precautions
B
1.Prior to inserting or extracting this connector, make sure that the connector is not energized and the power is in the OFF position.
2.There may be some resistance when inserting the cables into this connector, even if the cables are within the applicable cable range.
This is to be expected due to the connector’s waterproof ability. The waterproof performance and clamp force is dependant on the cable
specification. Please check the cable specifications before using as they can cause a difference in performance in the waterproof
protection and cable clamp force.
3.Please contact your local Hirose Sales Representative for any inquiries regarding the assembly procedures of this connector.
®
2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
+
+
TEL: 81-45-620-3526 Fax: 81-45-591-3726
http://www.hirose.com
http://www.hirose-connectors.com
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.
The contents of this catalog are current as of date of 07/2018. Contents are subject to change without notice for the purpose of improvements.
6
相关型号:
©2020 ICPDF网 联系我们和版权申明