HR31-TC-01 [HRS]
Interface Connectors for Factory Automation Network;
| 型号： | HR31-TC-01 |
| 厂家： | 
HRS |
| 描述： | Interface Connectors for Factory Automation Network |
| 文件： | 总6页 (文件大小：242K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Interface Connectors for Factory Automation Network
HR31 Series
Complies with DeviceNet requirements
Comparison of plug heights
●Hirose HR31
●Other manufacturer’s product
Features
■
1. DeviceNet Compliant
Conforms to requirements of Factory Automation Network DeviceNet standards.
Hirose products are distinct from products of made others, as described below.
Feature
Made by others
Hirose HR31
Crimped to commercially available cap
connectors, inserted into housing and
fastened by screw. (*)
Reduced number of termination
operations
Crimped and connected to terminal then
fastened simply by inserting into housing.
Plug height is 10.2 mm, allowing use of less
space when mounting several connectors
Permanently identified contact positions
High density mounting
Plug height : 15 mm
Prevention of connection errors Contact positions not identified.
Number of required operations
Connectors are attached by screws from
to secure receptacle assembly
the opposite side.
No need for screws, built-in locking pin secures
connector to the board
to the board
*Although it is possible to terminate discrete cables with screws and not use a pin contact, however, there is the potential issue
and concern for long-term reliability and problems. Therefore, most users prefer to use crimp contacts.
2. Screw-lock style
Total space occupied by mated
assemblies
The screw lock style connector features secure mating and
a higher locking force retention.
3. Snap-lock Style
The snap lock plug features a structure that creates a tactile
click during mating.
With screw lock
12
20
4. Commercially available tools may be used
Use crimp tools conforming to JIS C 9711 standards.
Terminated contacts can be removed using 1 mm dia. steel
pin. and re-inserted.
5. Protected contacts
When installed, the crimped contacts are protected
completely by the plug housing. This design eliminates the
risk of damaging the contacts.
In cases where the application will demand a high level of reliability, such as automotive,
please contact a company representative for further information.
1
2014.12w
HR31 Series●Interface Connectors for Factory Automation Network
Product Specification
2
12A (2.5mm wire)
Operating temperature range
Storage temperature range
-40ç to +100ç
Current rating
2
10A (1.5mm wire)
250V AC, 350V DC
Rating
-40ç to +85ç
Voltage rating
Item
Specification
Conditions
1.Contact resistance
2.Insulation resistance
3.Withstanding voltage
5 mø max.
1000 Mø min.
No flashover or insulation breakdown
1A DC
500 V DC
2000V AC/one minute
Standard waveform of 4KV, positive/negative,
3 times each
4.Impulse withstanding voltage No flashover or insulation breakdown
Frequency: 10 to 55 Hz, single amplitude of
5.Vibration
No electrical discontinuity of 10 µs or more 0.75 mm, 5 min. in each of the 3 directions, 10
cycles each
6.Durability
(insertion/ withdrawal)
Contact resistance: 10 mø max.
1000 cycles
Temperature: -40ç / Room temperature to
+100ç / Room temperature
Time: 30 / 10 to 15 / 30 / 10 to 15 (Minutes)
5 cycles
7.Temperature cycle
8.Humidity
Insulation resistance: 1000 Mø min.
Insulation resistance:
96 hours at temperature of 40ç and humidity
10 Mø min. (Humidity state)
of 90% to 95%
100 Mø min. (Dry state)
Materials
Part
Insulator
Screw
Material
Finish
Color: Black or Green
Nickel plating
Remarks
UL94V-0
–––––
PBT
Steel
Plug
Contact area: phosphor bronze Contact area: gold plating
Crimp contact
Socket contact
Insulator
–––––
UL94V-0
–––––
Termination area: copper
PBT
Termination area: tin plating
Color: Black or Green
Contact area: gold plating
Termination are: gold plating
Nickel plating
Male contact
Brass
Receptacle
Nut
Steel
–––––
Board retention pin
Phosphor bronze
Tin plating
Board retention pin
Ordering information
●Connector
( )
HR31 - 5.08 P A - 5 S C 01
q
w
e
r
t
y
u
i
Model name
Contact pitch
Connector type
HR31
5.08mm
P: Plug
q
w
e
Terminal type
u
C: Crimping
DL: Right angle through hole type
D: Straight through hole type
Other specifications: A two-digit number
such as (01) or (02) is
R: Receptacle
Screw lock type
Blank: With screw
A: Without screw
5
i
r
t Number of contacts
added to indicate
other specifications.
Contact type
y
S: Female contact
P: Male contact
●Crimp contact
( )
HR31 - SC - 1 1 1 01
o
!
!
!
!
!
Model name
Contact type
Contact packaging type 1: loose contact
HR31
SC: female contact
o
!
!
!
! Plating type
1: Gold plating
Other specifications: A two-digit number
such as (01) or (02) is
!
Conductor cross area
2
1: 1.04 to 2.63mm
2: 0.2 to 1.65mm
added to indicate
other specifications.
2
2
HR31 Series●Interface Connectors for Factory Automation Network
27
Plug (with screw lock)
2
1 3
4
5
25.4
35.5
HR31-5.08P-5SC
Part No.
HR31-5.08P-5SC(72)
HRS No.
131-0002-2 72
Weight
8g
Color
Green
B
Crimp contact
B - B
23
B
Part No.
HR31-SC-111(71)
HR31-SC-121(71)
HRS No.
131-0004-8 71
131-0005-0 71
ØA
4
3.3
Weight Contact plating Applicable conductor cross area (Note 2)
1.04 to 2.63mm2
1g
Gold
0.2 to 1.65mm2
Note 1: Packaging (100 pcs/pack)
Note 2: For a multi-strand conductors
Receptacle (Right angle through hole type with screw lock)
Connector mounting side
12
35.5
1
2
3
4
5
7.5
10
HR31-5.08R-5PDL
Part No.
HRS No.
Weight
4g
Color
Black
Green
Contact plating
Gold
Board retention pin
With
HR31-5.08R-5PDL(72) 131-0001-0 72
HR31-5.08R-5PDL(75) 131-0001-0 75
PCB mounting pattern
● With screw lock
5.08 0.05
5.08 0.05
10.16 0.05
10.16 0.05
15.24 0.05 15.24 0.05
Connector mounting side
(Board thickness =1.6)
3
HR31 Series●Interface Connectors for Factory Automation Network
Receptacle (Straight through hole type with screw lock)
35.5
ꢀ
３
１
２
４
５
12 4.3
Connector mounting side B
HR31-5.08R-5PD
Part No.
HR31-5.08R-5PD(76)
HRS No.
131-0003-5 76
Weight
4g
Color
Green
Contact plating Board retention pin
Gold
Without
PCB mounting pattern
● With screw lock
5.±8± ±.±5
5.±8± ±.±5
1±.16± ±.±5
1±.16± ±.±5
Connector mounting side B
(Board thickness =1.6)
4
HR31 Series●Interface Connectors for Factory Automation Network
Tools
Type
Part No.
HRS No.
Manual crimp tool
Contact removal pin
HR31-TC-01
HR31-SC-TP
902-1512-4
150-0215-1
Manual crimp tool
Contact removal pin
● Tools application procedures
1. Manual contact crimp tool
The tool will terminate all specified crimp contacts. Placement of correct contact in
corresponding crimp position on the tool is critical. The positions are clearly indicated on the tool
as (2) and (1.25). The exposed conductor strip length is 5mm.
Crimp position indicator
Applicable crimp contact
HR31-SC-111
2
1.25
HR31-SC-121
Crimp position indicator
2. Contact removal/extraction
Wiring errors can be corrected by removing the crimp contacts using the extraction tool and the
following procedure.
1) Insert the extraction tool from the underside of connector and apply pressure onto the mold
lance. (Fig.1)
2) While pressing on the mold lance, angle the extraction tool and release the disconnection
prevention mechanism on the crimping contact. (Fig.2)
3) Remove the extraction tool.
4) Pull the wire rearward to disconnect and remove the contact.
Mold lance
Mold lance
Wire
Wire
Pull-out
Insertion direction
Contact removal pin
Contact removal pin
5
HR31 Series●Interface Connectors for Factory Automation Network
Usage Precautions
1. To prevent damage, align receptacle with the panel and board in such a way that it is not
subject to excess loads.
1.1 Recommended mounting panel dimensions (right angle through hole type)
Panel
A
Part No.
A
5 min.
+0.2
+0
HR31-5.08R-5PDL(**)
36
+±.2
±
16.6± ±.1
3.2
+±.2
±
2
Board
1.2 Recommended mounting panel dimensions (straight through hole type)
Panel
Part No.
B
5 min.
B
+0.2
HR31-5.08R-5PD(**)
36
+0
16.6± ±.1
3.2
2 +±.2
±
2. Insert the crimp contact into the plug in the direction shown below.
Crimp contact
Wire
3. Use a number 0 cross drive bit to tighten the screw lock’s screw.
4. Assure that the circuit’s power is off when mating and un-mating connectors.
®
2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
+
+
TEL: 81-45-620-3526 Fax: 81-45-591-3726
http://www.hirose.com
http://www.hirose-connectors.com
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.
The contents of this catalog are current as of date of 12/2014. Contents are subject to change without notice for the purpose of improvements.
6
相关型号：
©2020 ICPDF网 联系我们和版权申明