HRMJ-X.FLP [HRS]
RF Connector Adapter;型号: | HRMJ-X.FLP |
厂家: | HRS |
描述: | RF Connector Adapter 连接器 |
文件: | 总12页 (文件大小:421K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm,
2.4mm Mated Height
U.FL Series
Up to 6GHz
Mated height comparison (with E.FL series)
U.FL-LP-040HF
U.FL-LP-066HF
U.FL-LP-068HF
E.FL-LP-040
E.FL-LP-066
U.FL-LP-062HF
U.FL-LP-088HF
U.FL-LP(V)-040HF
U.FL
E.FL
Fig.1
●Space Factor of Mated Connector
■Features
1. Nominal mated height of 1.9 or 2.3mm, 2.4mm
(Fig.1)
U.FL-LP-040HF
Plug
(
)
Max. 2.0 or 2.4mm, 2.5mm
2. Small mounting area
The receptacle occupies an area of 7.7mm2.
3. Light weight
Dia 0.81
Receptacle : 15.7mg
U.FL-R-SMT-1
4. Supports high frequency up to 6GHz
To meet the frequency requirements of a wide
variety of miniature devices, the connectors offer
high frequency performance from DC to 6GHz, with
a V.S.W.R. of 1.3 to 1.5 max.
U.FL-LP-066HF
U.FL-LP-068HF
Plug
Dia 1.32
Dia 1.13
5. Automatic board placement
Packaged on tape-and-reel the receptacles can be
placed with vacuum nozzles of the automatic
placement equipment.
U.FL-R-SMT-1
6. Plugs are terminated with ultra-fine
U.FL-LP(V)-040HF
Plug
(
)
coaxial fluorinated resin insulated cable
Dia 0.81
Standard ultra-fine coaxial cable of 0.81mm diameter
(single braid shielding) is used for the plug
termination, assuring secure and stable connections.
U.FL-R-SMT-1
7. Simple connector mating / unmating
Use of available extraction tool assures correct
disconnection of the plug and receptacle.
U.FL-LP-062HF
Plug
8. Verification of the fully mated condition
Dia 0.95
Tactile click sensation confirms fully mated
condition, assuring complete electrical and
mechanical connection.
U.FL-R-SMT-1
9. Halogen-free*(Receptacle,plug(HF type))
*As defined by IEC61249-2-21
Br-900 ppm maximum, Cl-900 ppm maximum,
Cl+Br combined-1,500 ppm maximum
U.FL-LP-088HF
Plug
Dia 1.37
U.FL-R-SMT-1
Fig.2
In cases where the application will demand a high level of reliability, such as automotive,
please contact a company representative for further information.
1
2018.6④
U.FL Series●Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
■Product Specifications
Nominal characteristic impedance 50ø
Operating temperature range -40˚C to +90˚C Storage temperature range
-30˚C to +70˚C
90%RH max.
Ratings
Frequency range
DC to 6GHz
Operating humidity
90%RH max.
Storage humidity
Item
Specification
Conditions
Center : 20mø max.
Outer : 10mø max.
500Mø min.
10mA max.
100V DC
1. Contact resistance
2. Insulation resistance
3. Withstanding voltage
No flashover or insulation breakdown.
200V AC / 1 minute
Part No.
Up to 3GHz
1.3 Max
1.3 Max
1.3 Max
1.3 Max
1.3 Max
1.3 Max
3 to 6GHz
U.FL-LP-040HF dia.0.81mm Coaxial Cable Assembly
U.FL-LP(V)-040HF dia.0.81mm Coaxial Cable Assembly
U.FL-LP-068HF dia.1.13mm Coaxial Cable Assembly
U.FL-LP-066HF dia.1.32mm Coaxial Cable Assembly
U.FL-LP-062HF dia.0.95mm Coaxial Cable Assembly
U.FL-LP-088HF dia.1.37mm Coaxial Cable Assembly
1.35 Max
1.3 Max
1.4 Max
1.5 Max
1.3 Max
1.4 Max
4. V.S.W.R.*
5. Durability
Contact resistance
Center : 25mø max.
Outer : 15mø max.
(mating / un-mating,
with corresponding
plug)
30 cycles
Frequency : 10 to 100Hz, single amplitude of 1.5mm,
acceleration of 59m/s2, for 5 cycles in the direction of each
of the 3 axis.
6. Vibration
7. Shock
No electrical discontinuity of 1µs min.
No damage, cracks or parts dislocation.
Acceleration of 735m/s2, 11ms duration, sine half-
wave waveform, 3 cycles in each of 3 axes.
No damage, cracks or parts dislocation.
Insulation resistance 10Mø min.(humidity high)
Insulation resistance 500Mø min.(dry)
No damage, cracks or parts dislocation.
Contact resistance : 25mø max. (Center)
15mø max. (Outer)
8. Humidity
96 hours at temperature of 40ç and humidity of 95%.
(Steady state)
Temperature : -40˚C/+5 to +35˚C/+90˚C/+5 to +35˚C
9. Temperature cycle
Time : 30min. / 3min.
/
30min.
/
3min.
5 cycles
10. Salt spray
No excessive corrosion
5% salt water solution, 48 hours
*V.S.W.R. Measurement System
The above V.S.W.R. standard values were measured using the measurement connection shown below.
Note 1 : Cable type connectors were measured with SMA conversion
adapters attached to both ends of the harness product of a
suitable 100cm cable.
Note 2 : Board type connectors were mounted to a 50ø glass epoxy
board and measurements were conducted with SMA
conversion adapters attached.
■Material / Finish
●Plug-right angle
Part
Material
Finish/Remarks
Silver plated
Shell
Phosphor bronze
PBT, Color : Gray
LCP, Color : Milky-white
Phosphor bronze
UL94HB (LP (V) -040HF)
UL94V-0(040HF,066HF, 068HF, 062HF, 088HF)
Gold plated
Insulator
Female center contact
●Receptacle
Part
Material
Phosphor bronze
LCP, Color : Milky-white
Brass
Finish/Remarks
Silver plated
UL94V-0
Shell
Insulator
Male center contact
Gold plated
2
U.FL Series●Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
■Receptacles
B
Recommended PCB
GND
GND
Mounting Pattern
SIG
No conductive traces in this area
Ø2
4
0.05
1.9 0.05
GND
3
2.6
0.6
GND
SIG
1 0.05
U.FL-R-SMT-1
Part No.
HRS No.
Packaging
100 pcs/pack
4,000 pcs/reel
10,000 pcs/reel
Weight / EA
15.7/mg
U.FL-R-SMT-1(01)
U.FL-R-SMT-1(60)
U.FL-R-SMT-1(80)
331-0472-2 01
331-0472-2 60
331-0472-2 80
Note : This area may be covered by insulating material.
Embossed Carrier Tape Dimensions(IEC 60286-3 compliant)
Embossed Carrier Tape Dimensions
Reel Dimensions
2
4
Center contact
13.5
Material:PS(Black)
8
U.FL-R-SMT-1(60): 8mm pitch
A
2
4
Center contact
A(
SCALE FREE
)
2
Unreeling direction
4
U.FL-R-SMT-1(80): 4mm pitch
3
U.FL Series●Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
■Cable Assembly (Plug)
U.FL-LP-066HF
U.FL-LP-068HF
U.FL-LP-040HF
U.FL-LP(V)-040HF(06) U.FL-LP-062HF(06) U.FL-LP-088HF(06)
Part No.
Size
4
3.4
5
4
4
2.5mm Max.
2.5mm Max.
2.0mm Max.
2.4mm Max.
2.4mm Max.
Mated Height
(2.4mm Nom.)
(2.4mm Nom.)
(1.9mm Nom.)
(2.3mm Nom.)
(2.3mm Nom.)
Dia. 1.13mm and
Dia. 1.32mm
Applicable
cable
Dia. 0.81mm
54
Dia. 0.81mm
Dia. 0.95mm
45.5
Dia. 1.37mm
72
59
35
Weight (mg)
Environmental
compliant
Halogen-free, RoHS2 compliant
●Cable Guide
Cable Specification
Cable
Description
Type
Nominal attenuation
Inner
Dielectric
Diameter
Outer
Conductor*
Jacket
Flame Retardant
Grade
Conductor*
7/0.05 SA
(AWG#36)
7/0.08 SA
(AWG#32)
7/0.08 SA
(AWG#32)
7/0.071 SA
(AWG#33)
7/0.102 SA
(AWG#30)
7/0.102 SA
(AWG#30)
Diameter
At 3GHz
At 6GHz
Dia.0.81mm
Coaxial Cable
Dia.1.13mm
Coaxial Cable
Dia.1.32mm
Coaxial Cable
Dia.0.95mm
Coaxial Cable
Dia.1.37mm
Coaxial Cable
Dia.1.37mm
Coaxial Cable
Dia.0.4mm
FEP
Single
Dia.0.81mm
FEP
04
5.4dB/m
8.0dB/m
Shield TA
Single
Dia.0.68mm
FEP
Dia.1.13mm
FEP
068
066
062
088
088
3.73dB/m
3.8dB/m
3.1dB/m
2.8dB/m
2.5dB/m
5.44dB/m
5.6dB/m
4.4dB/m
4.3dB/m
3.4dB/m
Shield TA
Double
Dia.0.66mm
FEP
Dia.1.32mm
FEP
Shield TA
Tape, single
Shield TA
Single
VW-1
Dia.0.62mm
FEP
Dia.0.95mm
FEP
Dia.0.88mm
FEP
Dia.1.37mm
FEP
Shield TA
Tape, Single
Shield TA
Dia.0.88mm
FEP/PTEE
Dia.1.37mm
FEP
(data as provided by cable suppliers, for reference only)
* SA : Silver plated annealed copper wire, TA : Tin plated annealed copper wire
[Plugs can be ordered only as terminated cable assemblies.]
4
U.FL Series●Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
How To Specify Cable Assembly
[Single-ended cable assembly]
[Double-ended cable assembly]
L
L
Ordering information
●Product Number Structure
Used plug : U.FL-LP(V)-040HF(06)
U.FL-LP-040HF(Dia.0.81mm)
Used plug : U.FL-LP-062HF(06)(Dia.0.95mm)
Double-
Double-
「」
TV
「」
062N
U.FL
-
-
2LP HF6
-
-
04N
-
-
A
A
-
-
L
U.FL
-
-
2LP HF6
-
-
D
-
-
A
A
-
-
L
Ended
Ended
1
2
3
4
5
6
7
1
2
3
4
5
6
7
Single-
Ended
Single-
Ended
「」
TV
「」
062N
U.FL
LP HF6
04N
L
U.FL
LP HF6
D
L
1
2
3
4
5
6
7
1
2
3
4
5
6
7
U.FL, UFL
U.FL, UFL
q Series name
q Series name
LP : Single ended LPV : Plug(V) Single ended
LP : Single ended
w Assembly type
w Assembly type
2, 2LP : Double ended 2LPV plug(V) Double ended
2, 2LP : Double ended
HF6 : Halogen-free
HF6 : Halogen-free
e Environmental
e Environmental
compliant
compliant
04N : Dia.0.81mm Ultra-fine coaxial cable
1 : White, 2 : Black
062N : Dia.0.95mm Ultra-fine coaxial cable
1 : Gray, 2 : Black
r Cable type
t Cable color
r Cable type
t Cable color
TV : Tin plated braided wire
D : Copper tape + Tin plated braided
wire
y Cable outer
y Cable outer
conductor
conductor
Length(L)
Length(L)
u Total length(mm)
u Total length(mm)
Used plug : U.FL-LP-068HF(Dia.1.13mm)
Used plug : U.FL-LP-088HF(06)(Dia.1.37mm)
「」
068N
「」
Double-
Ended
Double-
U.FL
-
-
2LP HF6
-
-
T
-
-
A
A
-
-
L
U.FL
-
-
2LP HF6
-
-
088N
T
-
-
A
A
-
-
L
Ended
1
2
3
4
5
6
7
1
2
3
4
5
6
7
「」
068N
「」
088N
Single-
Ended
Single-
Ended
U.FL
LP HF6
T
L
U.FL
LP HF6
T
L
1
2
3
4
5
6
7
1
2
3
4
5
6
7
U.FL, UFL
LP : Single ended
U.FL, UFL
LP : Single ended
q Series name
w Assembly type
q Series name
w Assembly type
2, 2LP : Double ended
2, 2LP : Double ended
HF6 : Halogen-free
HF6 : Halogen-free
e Environmental
e Environmental
compliant
compliant
068Y :
068N:
088Y :
088N :
r Cable type
r Cable type
Dia.1.13mm Ultra-fine coaxial cable
Dia.1.37mm Ultra-fine coaxial cable
1 : Gray, 2 : Black
1 : Gray, 2 : Black
t Cable color
t Cable color
T : Tin plated braided wire
T : Tin plated braided wire
y Cable outer
y Cable outer
conductor
conductor
PD : Copper tape + Tin plated braided wire
Length(L)
Length(L)
u Total length(mm)
u Total length(mm)
Used plug : U.FL-LP-066HF(Dia.1.32mm)
「」
066N
Double-
Ended
U.FL
-
-
2LP HF6
-
-
-
A
A
-
-
L
●Standard tolerances for (L)
1
2
3
4
5
6
(L)(mm)
Standard Tolera(mm)
「」
066N
Single-
Ended
U.FL
LP HF6
-
L
*L=35 to 200
4
1
2
3
4
5
6
L=200 to 500
L=500 to 1000
8
12
U.FL, UFL
LP : Single ended
2, 2LP : Double ended
q Series name
w Assembly type
L=Longer than 1000
1.5ꢀ of (L)
Note : Minimum available length(L) is 35mm
HF6 : Halogen-free
e Environmental
compliant
066N : Dia.1.32mm Ultra-fine coaxial cable
1 : Gray, 2 : Black
r Cable type
t Cable color
Length(L)
y Total length(mm)
5
U.FL Series●Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
■Conversion Adapters
●SMA Conversion Adapter
(10.7)
8HEX
(Mating portion: U.FL side jack - SMA side plug)
Note : The U.FL side mating portions has a lower lock retention
force than the regular product, therefore, cannot be used
for purposes other than performance measurements.
Part No.
HRS No.
HRMP-U.FLJ(40)
311-0300-2 40
●SMA Conversion Adapter
(Mating portion: U.FL side plug - SMA side jack)
14.05
(4.05)
6
5.6
1/4-36UNS-2A
Part No.
HRS No.
Note : The U.FL side mating portions has a lower lock retention
force than the regular product, therefore, cannot be used
for purposes other than performance measurements.
HRMJ-U.FLP(40)
311-0301-5 40
(18.6)
(4)
●SMA Conversion Adapter
(Mating portion: U.FL side plug - SMA side jack)
5.5
6
1/4-36UNS-2A
Part No.
HRS No.
Note : This connector is used by compressing the mated
portion of U.FL side onto the U.FL-R-SMT-1 portion.
HRMJ-U.FLP-ST1(40)
311-0385-5 40
12.9
(7.9)
7HEX
5
■Receptacle to Inspection
(4.4)
1
M5∞0.5
This receptacle is used for inspecting the continuity, withstand
voltage, and other aspects of the harness product.
Part No.
HRS No.
U.FL-R-1
331-0466-0
(90)
Plug Extraction Tool
50
This tool is used for extraction from a mating condition.
U.FL
MARKING
U.FL
U.FL/V
Part No.
HRS No.
331-0494-5
331-0493-2
Note : Part No. U.FL-LP-N-2 for U.FL-LP-040HF/066HF/088HF/068HF.
Part No. U.FL-LP(V)-N-2 for U.FL-LP(V)-040HF/U.FL-LP-062HF.
U.FL-LP-N-2
U.FL-LP(V)-N-2
Plug Insertion Tool
(12.9)
This tool is for mating U.FL series plug into receptacle.
J A P A N
For distinction with
W.FL-LP-IN.
Part No.
HRS No.
U.FL-LP-IN
331-0334-9
6
U.FL Series●Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Usage Precautions
1. Plugs
1) To disconnect connectors, insert the end portion of U.FL-LP-N-2 and U.FL-LP(V)-N-2 under the
connector flanges and pull off vertically, in the direction of
the connector mating axis.
Extraction Tool
2) To mate the connectors, the mating axes of both connectors
must be aligned and the connectors can be mated. The
"click" will confirm fully mated connection.Do not attempt to
insert on an extreme angle.
U.FL Cable
Assembly
(1) Mating / unmating
U.FL-R-SMT-1
After the connectors are mating, do not apply a load to the cable in excess of the values indicated in the
diagram below.
U.FL-LP
Cable Assembly
1N max (U.FL-LP(V)-040HF, U.FL-LP-062HF)
2N max (U.FL-LP-040HF, U.FL-LP-066HF, U.FL-LP-068HF, U.FL-LP-088HF)
(2) Pull forces on the cable
after connectors are
mated.
U.FL-R-SMT-1
3N max (U.FL-LP(V)-040HF, U.FL-LP-062HF)
4N max (U.FL-LP-040HF, U.FL-LP-066HF, U.FL-LP-068HF, U.FL-LP-088HF)
1N max (U.FL-LP(V)-040HF, U.FL-LP-062HF)
2N max (U.FL-LP-040HF, U.FL-LP-066HF, U.FL-LP-068HF, U.FL-LP-088HF)
(3) Precautions
Do NOT forcefully twist or deform wires.
2. Receptacles
q The temperature of the printed circuit
250 ç max. for
board surface temperature at the
points of contact with the terminals.
w Reflow soldering should be
performed at a printed circuit surface
temperature of 250°C max.
e In individual applications the actual
temperature may vary, depending on
the solder paste type, volume /
thickness and board size / thickness.
Consuly your solder paste and
equipment manufacturer for specific
recommendations.
[
]
10 seconds
ç
260
240
220
200
180
160
140
120
100
80
230ç
220ç
Preheat
(130 to 180ç)
(1) Recommended reflow
temperature profile
120 seconds max.
50 seconds max.
60 seconds max.
Time
(2) Recommended manual
soldering
Manual soldering : 350˚C for 5 seconds
(3) Recommended metal
mask thickness
0.1 to 0.12mm
2 times
(4) Reflow cycles
3. Operating environment and storage conditions
The connectors are not designed to operate in the following environments :
• Exposed to a excessive amounts of fine particles and dust
(1) Operating environment • Regions and places having a high density of sulfur dioxide, hydrogen sulfide, nitrogen dioxide or other corrosive
gasses.
• Environments having large rapid variations in temperature.
Store in the Hirose Electric packaging.
Temperature : -10 to +40ç, Humidity : 85% max.
Use within 6 months of delivery.
Receptacles for which the storage period has elapsed must be tested for solderability to the PC board
(2) Storage conditions -
Receptacle
mounting surface.
7
U.FL Series●Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
■SMA cable type
SMA
Straight Plug
15
8HEX
Part No.
HRS No.
Applicable cable
Dia. 0.81 type
HRM-200-040PBN(40)
HRM-200-066PBN(40)
HRM-200-088PBN(40)
323-0790-3 40
323-0791-6 40
323-0800-5 40
Dia. 1.13, Dia.1.32 type
Dia. 1.37 type
17
4.5
8
8HEX
Straight Jack
Part No.
HRS No.
Applicable cable
Dia. 0.81 type
HRM-200-040JBN(40)
HRM-200-066JBN(40)
HRM-200-088JBN(40)
323-0792-9 40
323-0793-1 40
323-0801-8 40
Dia. 1.13, Dia.1.32 type
Dia. 1.37 type
17
12.7
8.64
9.55
1.7
4∞Ø2.6
Panel mount Jack (Four Screws)
Part No.
HRS No.
Applicable cable
Dia. 0.81 type
HRM-200-040PJ4BN(40)
HRM-200-066PJ4BN(40)
HRM-200-088PJ4BN(40)
323-0795-7 40
323-0796-0 40
323-0803-3 40
Dia. 1.13, Dia.1.32 type
Dia. 1.37
type
17
9.55
1.7
8
Panel mount Jack (Two Screws)
2×Ø2.6
Part No.
HRS No.
Applicable cable
Dia. 0.81 type
HRM-200-040PJ2BN(40)
HRM-200-066PJ2BN(40)
HRM-200-088PJ2BN(40)
323-0794-4 40
323-0788-1 40
323-0802-0 40
Dia. 1.13, Dia.1.32 type
Dia. 1.37 type
17
8HEX
5.85
5.9+0.1
Panel mount Jack (Bulkhead)
0
1.5
11
Ø6.4+0.1
0
Part No.
HRS No.
Applicable cable
Dia. 0.81 type
HRM-200-040BPJBN(40)
HRM-200-066BPJBN(40)
HRM-200-088BPJBN(40)
323-0797-2 40
323-0798-5 40
323-0804-6 40
Dia. 1.13, Dia.1.32 type
Dia. 1.37 type
8
U.FL Series●Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Reverse polarity SMA
Straight Jack
17
4.5
8
8 HEX
1/4-36UNS-2A
Part No.
HRS No.
Applicable cable
Dia. 0.81 type
SMA(R)-200-040JBN
SMA(R)-200-066JBN
SMA(R)-200-088JBN
323-0926-3
323-0931-3
323-0904-0
Dia. 1.13, Dia.1.32 type
Dia. 1.37 type
17
12.7
8.64
Panel mount Jack (Four Screws)
Panel mount Jack (Two Screws)
Panel mount Jack (Bulkhead)
9.55
1.7
1/4-36UNS-2A
Part No.
HRS No.
Applicable cable
Dia. 0.81 type
SMA(R)-200-040PJ4BN
SMA(R)-200-066PJ4BN
SMA(R)-200-088PJ4BN
323-0928-9
323-0932-6
323-0934-1
Dia. 1.13, Dia.1.32 type
Dia. 1.37 type
17
9.55
1.7
8
1/4-36UNS-2A
Part No.
HRS No.
Applicable cable
Dia. 0.81 type
SMA(R)-200-040PJ2BN
SMA(R)-200-066PJ2BN
SMA(R)-200-088PJ2BN
323-0929-1
323-0933-9
323-0935-4
Dia. 1.13, Dia.1.32 type
Dia. 1.37 type
17
8 HEX
5.85
●Panel cut-out
1.5
11
+0.1
5.9
0
1/4-36UNS-2A
Part No.
HRS No.
Applicable cable
Dia. 0.81 type
SMA(R)-200-040BPJBN
SMA(R)-200-066BPJBN
SMA(R)-200-088BPJBN
323-0927-6
323-0902-5
323-0901-2
Dia. 1.13, Dia.1.32 type
Dia. 1.37 type
9
U.FL Series●Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
■How To Specify Cable Assembly
Ordering information
P : Plug
L mm
HRM P-UFLHF6-04
-A-L
「※」
2
「※」
q
w
e
r
t
HRM : SMA type
q Series name
SMAR : Reverse polarity SMA
P
J
: Plug
: Jack
w Connector type
PJ : Panel mount Jack(Four screws)
PJ2 : Panel mount Jack(Two screws)
BPJ: Panel mount Jack(Bulkhead)
J : Jack
L mm
04 : Dia. 0.81mm Coaxial cable
066 : Dia. 1.32mm Coaxial cable
068 : Dia. 1.13mm Coaxial cable
088 : Dia. 1.37mm Coaxial cable
e Cable type
r Cable color
04 2 : Black
066
068 2 : Black
088
PJ : Panel mount Jack (Four Screws)
L mm
Length(L)
t Total length(mm)
PJ2 : Panel mount Jack (Two Screws)
L mm
BPJ : Panel mount Jack (Bulkhead)
L mm
Note : Minimum available length(L) is 50mm
10
U.FL Series●Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
■SMA conversion adapter
SMA
Panel mount adapter (Four Screws)
17.9
1.7
12.7
8.64
9.55
1/4-36UNS-2A
Part No.
HRS No.
HRMJ-U.FLJ-PA4
311-0465-2
Panel mount adapter (Two Screws)
17.9
1.7
9.55
8
1/4-36UNS-2A
Part No.
HRS No.
HRMJ-U.FLJ-PA2
311-0467-8
Panel mount adapter (Bulkhead)
17.9
8 HEX
5.85
●Panel cut-out
1.5
11
+0.1
5.9
0
1/4-36UNS-2A
Part No.
HRS No.
HRMJ-U.FLJ-BPA-4
311-0463-7
PCB mount adapter
6
16
●Panel cut-out
1/4-36UNS-2A
5.08 0.05
5.08
Part No.
HRS No.
311-0411-3
311-0411-3 01
Finish
HRMJ-U.FLJ-PC
HRMJ-U.FLJ-PC(01)
Nickel plated
Gold plated
11
U.FL Series●Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Reverse polarity SMA
Panel mount adapter (Four Screws)
17.9
12.7
8.64
9.55
1.7
1/4-36UNS-2A
Part No.
HRS No.
SMA(R)J-U.FLJ-PA4
311-0466-5
Panel mount adapter (Two Screws)
17.9
1.7
8
9.55
1/4-36UNS-2A
Part No.
HRS No.
SMA(R)J-U.FLJ-PA2
311-0468-0
Panel mount adapter (Bulkhead)
17.9
8 HEX
5.85
●Mounting pattern
1.5
9.55
+0.1
5.9
0
1/4-36UNS-2A
Part No.
SMA(R)J-U.FLJ-BPA-4
HRS No.
311-0464-0
®
2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
+
+
TEL: 81-45-620-3526 Fax: 81-45-591-3726
http://www.hirose.com
http://www.hirose-connectors.com
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.
The contents of this catalog are current as of date of 06/2018. Contents are subject to change without notice for the purpose of improvements.
12
相关型号:
©2020 ICPDF网 联系我们和版权申明