HSC-AT11CS-A20 [HRS]
SC-Type Optical Fixed Attenuators; SC型光纤固定衰减器型号: | HSC-AT11CS-A20 |
厂家: | HRS |
描述: | SC-Type Optical Fixed Attenuators |
文件: | 总2页 (文件大小:165K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
NEW
SC-Type Optical Fixed Attenuators
HSC-AT11CS Series
■Features
■Ordering Information
1. Low return loss, 60 dB min.*
- - -
- -
**
HSC AT 11 CS A
2. Complies with Telcordia GR-910-CORE.
3. High input power (250 mW max.)
1
2
3
4
5
6
4. Variety of fixed attenuation levels.
1 to 16 dB (in 1 dB increments), 20, 25, and 30 dB
■Applications
Series name: HSC
Attenuator
Polishing code
CS: APC (>=60dB)
1
2
3
4
5
6
Optical fiber type A: Single Mode
Specification series
In-line mating with a standard A: 01, 02, 03, 04, 05, 06, 07, 08, 09,
Optical communication and data transfer
equipment requiring in-line fixed power level
adjustment.
SC connectors
A: 10, 11, 12, 13, 14, 15, 16, 20, 25, 30
Part Number
CL No.
Attenuation Attenuation Tolerance Return Loss Wavelength Split Sleeve
Fiber Type
HSC-AT11CS-A01
HSC-AT11CS-A02
HSC-AT11CS-A03
HSC-AT11CS-A04
HSC-AT11CS-A05
HSC-AT11CS-A06
HSC-AT11CS-A07
HSC-AT11CS-A08
HSC-AT11CS-A09
HSC-AT11CS-A10
HSC-AT11CS-A11
HSC-AT11CS-A12
HSC-AT11CS-A13
HSC-AT11CS-A14
HSC-AT11CS-A15
HSC-AT11CS-A16
HSC-AT11CS-A20
HSC-AT11CS-A25
HSC-AT11CS-A30
820-9001-2
820-9002-5
820-9003-8
820-9004-0
820-9005-3
820-9006-6
820-9007-9
820-9008-1
820-9009-4
820-9010-3
820-9011-6
820-9012-9
820-9013-1
820-9014-4
820-9015-7
820-9016-0
820-9017-2
820-9018-5
820-9019-8
1dB
2dB
3dB
4dB
5dB
6dB
7dB
8dB
9dB
10dB
11dB
12dB
13dB
14dB
15dB
16dB
20dB
25dB
30dB
+0.8dB
0.8dB
0.8dB
0.8dB
0.8dB
0.8dB
0.8dB
0.8dB
0.9dB
1.0dB
1.1dB
1.2dB
1.3dB
1.4dB
1.5dB
1.5dB
1.5dB
1.5dB
2.5dB
1310nm
1550nm
≥60dB
Zirconia
SM
2004.7
1
■Specifications
Operating temperature range
-40
-40
ç
ç
to +75
to +75
ç
ç
Max. input power
Fiber type
250 mW
SMF
Rating
Storage temperature range
Characteristic
Attenuation
Test Method (Conforms with Telcordia GR-910-CORE)
Specification
Refer to the various types of attenuation tolerance (the previous page).
60 dB min.
Measurement at a point within the wavelength of 1310 30
nm and a point within the wavelength of 1550 30 nm.
Return loss
Power
: 250mW(LD)
: 1470nm
After / during test, changing in attenuation(fluctuation)shall be less than
0.1dB.
Rated input power
Wavelength
Duration
: 100 hours
Temperature
Duration
: -5ç to 50ç
: 182.5 hours
: 15% to 90%
: -40ç to 75ç
Controlled Operating
Environment
Humidity
Temperature
Uncontrolled Operating
Environment
Period of 1 cycle : 8 hours
Number of cycles : 21
Low-Temperature Exposure and Thermal Shock
Temperature
Duration
:
:
23
ç
■ 40
ç
■
-
40
ç ■ 23ç
2.1h
72 h 5 min. minimum
1) After test, change in attenuation(fluctuation)and return loss shall be
1) as follows.
High-Temperture Exposure and Thermal Shock
Non-Operating
Environment
Temperature
Duration
:
:
23
ç
■ 70
ç ■ 70ç ■ 23ç
1) • Attenuation(fluctuation) : within 0.5 dB
1.6h
72 h 5 min. minimum
1) • Return loss
: 60 dB min.
High Relative Humidity Exposure
2) No breakage, crack or dislocation of components.
Temperature
Duration
:
:
23
ç
■ 40
ç
■
40ç ■ 23ç
0.6h
96 h 0.6h
Humidity
: 90% to 95%
: -10ç to 65ç
Temperature
Humidity/Condensation
Cycling Test
Period of 1 cycle : 12 hours
Humidity
: 90% to 100%
Number of cycles : 14
Temperature
Duration
: 43ç
Water Immersion
Vibration
: 168 hours
: PH 5.5
Solution
Vibration frequency range : 10 to 55 Hz
Maximum amplitude: 1.52 mm
Duration
: 2 hours in each of 3 directions
1) After /during test, change in attenuation(fluctuation)and return loss
1) shall be as follows.
1) • Attenuation(fluctuation) : within 0.5 dB
Bend angle
Load
: 90°
Side Pull Load
: 1.25 kg
1) • Return loss
: 60 dB min.
2) No breakage, crack or dislocation of components.
1) After test, change in attenuation(fluctuation)and return loss shall be
1) as follows.
1) • Attenuation(fluctuation) : within 0.5 dB
Cable Retention
Durability
Load
: 2 kg
Insertion/withdrawal cycles : 200
Drop onto a concrete floor from a height of 1.8 m.
Cycles: 8 times in each of 3 directions
1) • Return loss
: 60 dB min.
Impact Test
2) No breakage, crack or dislocation of components.
■Materials and Dimensions
Serial No.
9.4
Component
Body
Material
Zinc alloy
Zirconia
Zirconia
Ferrule
Split sleeve
35.5
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933
http://www.hirose.com
http://www.hirose-connectors.com
2
相关型号:
©2020 ICPDF网 联系我们和版权申明