MDF14A-9P-2.5DS [HRS]
2.5mm Pitch Board to Board Vertical Post Header; 2.5mm间距板对板立柱头型号: | MDF14A-9P-2.5DS |
厂家: | HRS |
描述: | 2.5mm Pitch Board to Board Vertical Post Header |
文件: | 总3页 (文件大小:125K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
2.5mm Pitch Board to Board Vertical Post Header
MDF14A Series
ꢀFeatures
1. Service Efficiency Up contact and contact.
The post header is developed in the special design capable
of vertically connecting the board unnecessary for insertion
or extraction.
The post header can be connected in combination of the
receptacle with the plug at low cost.
2. Current Capacity [5A]
By adopting the 0.8mm round pin as the post pin, the pin
strength can be enhanced as well as the current capacity
can be maintained at 5A approximately.
3. Board Pre-fixed Mechanism
The kink process is provided for the board pre-fix process.
Kink process
4. Pin Extraction Specification
The post header corresponds to individual pin extraction
specifications.
ꢀApplications
Various power supply units, and secondary power unit for
the set
B136
ꢀProduct Specifications
Current rating : 5A
Rating
Operating Temperature Range: -30 to +85ç(Note 1) Storage Temperature Range: -10 to +60ç(Note 2)
Voltage rating : 250V AC Operating Moisture Range: 40 to 80%
Storage Moisture Range: 40 to 70% (Note 2)
Item
Specification
Condition
1. Insulation Resistance 1000M ohms min.
500V DC
2. Withstanding voltage No flashover or insulation breakdown.
3. Vibration No damage, cracks, or parts looseness.
4. Humidity (Steady state) Insulation resistance: 1000M ohms min.
1500V AC/1 minute
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
96 hours at temperature of 40ç and humidity of 90% to 95%
(-55ç: 30 minutesꢀ5 to 35ç: 10 minutes max.ꢀ
(-85ç: 30 minutesꢀ5 to 35ç: 10 minutes max.) 5 cycles
Flow: 250ç for 10 seconds
5. Temperature Cycle
No damage, cracks, or parts looseness.
6. Resistance to Soldering heat No deformation of components affecting performance.
Manual soldering: 300ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
ꢀMaterial
Product
Part
Material
Polyamide
Brass
Finish
Beige
Remarks
Insulator
Contact
UL94V-0
________
Pin Header
Tin plated
Note: Hirose's tin plating process takes measures against whisker.
ꢀOrdering Information
ꢀConnector
MDF14A - * P - 2.5 DS
q
w
e
r
t
q Series Name
: MDF 14A
r Contact pitch: 2.5mm
t Connection Type
DS : Right Angle
w Number of contacts: 4 to 10
e Connector Type
P : Pin Header
B137
ꢀPin Header
+0.1
ꢀApplicable Through-hole Diameter :
Ø1.0+0
BApplication Pattern
Note:The kink process is alternately performed in
optional directions.
Unit: mm
B
Part Number
MDF14A- 4P-2.5DS
MDF14A- 5P-2.5DS
MDF14A- 6P-2.5DS
MDF14A- 7P-2.5DS
MDF14A- 8P-2.5DS
MDF14A- 9P-2.5DS
MDF14A-10P-2.5DS
CL No.
Number of Contacts
A
[Specific No.] –* *, (* *)
None :100 pcs. per bag
547-0242-4-
547-0241-1-
547-0240-9-
547-0239-0-
547-0238-7-
547-0237-4-
547-0236-1-
4
5
10.0
12.5
15.0
17.5
20.0
22.5
25.0
7.5
(**)
(**)
(**)
(**)
(**)
(**)
(**)
**
**
**
**
**
**
**
10.0
12.5
15.0
17.5
20.0
22.5
6
7
8
9
10
Note: A packaging quantity is delivered by the bag unit (100 pcs.). If needed,
please order the products per bag.
BPrecautions
1. Recommended Soldering Condition
Flow: 250ç for 3 seconds
Manual soldering: 290ç for 2 seconds
B138
相关型号:
©2020 ICPDF网 联系我们和版权申明