MI21A-50PD-SF(83)_技术文档

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

©

Complies with Compact Flash Association

Compact Flash Card Connectors

MI20/21 Series

(a)Space-saving design

■Features

(b)Suitable for automatic mounting

1. Compact design occupies minimum space

Connectors are designed with small width and depth for

miniaturization and the foot print on the board has been

made smaller. (See (a) to the right)

2. Supplied with ground terminals

The MI21 Series are furnished with ground terminals.

3. Card ejection mechanism

Two point ejection mechanism to assure even card

ejection.

4. Designed and packaged for board placement

with automatic equipment

Headers are designed with a pick up area to accommodate

the pick-and -place nozzles of automatic mounting

machines. (Patents pending)

Receptacles are designed to be mounted on top the board,

and automatic mounting is possibble on the specified

board.

5. Card ejection mechanism

Available in several termination and mouting styles, with

and without ejection mechanism, with and without stand-

offs.

6. Rich variations

A rich assortment of variations allows selection of a type to suit

the specific card and the equipment to which it will be installed.

Ø

(1)Suitable cards: Type I , type I/II .

(2)Eject button: None, right , left

(3)Standoff: 0 mm, 2.2 mm

(4)Board mounting type: Standard , reverse

■Applications

PDA, digital still cameras, etc.

C2

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

©

MI20/21 Series●Compact Flash Card Connectors

■ Product Specifications

Current rating 0.5 A

Operating temperature range

Storage temperature range

Storage humidity range

-20 to +60ç (Note 1)

-10 to +60ç (Note 2)

-40 to 70% (Note 2)

Rating

Relative humidity 95% or less

Voltage rating 125 V AC Operating humidity range

(No condensation)

Item

Specification

Conditions

1. Insulation resistance

2. Withstanding voltage

3. Contact resistance

500 V DC

500 V AC / 1 minute

1 mA

1,000 Mø min.

No flashover or insulation breakdown.

40 mø max. (initial value) (Note 3)

Frequency: 10 to 2000 Hz, full amplitude of 1.52 mm or

4. Vibration

No electrical discontinuity of 100ns or more

2

acceleration of 147 m/s (peak), 4 hours in each of the 3 directions.

96 hours at temperature of 40 2ç and humidity of 90% to 95%

5. Humidity (Steady state) Insulation resistance of 100 Mø min.

Temperature: -55

ç

for 30 min. --> +5 to 35

ç within 5 min.

6. Temperature cycle

Insulation resistance of 100 Mø min.

85 for 30 min. --> +5 to 35

ç

within 5 min. for 5 cycles

7. Durability

Change of contact resistance from initial value is

10000 cycles at 400 to 600 cycles per hour

(Insertion/withdrawal) 20 mø max.

8. Resistance to

Soldering heat

Reflow: At the recommended temperature profile

Manual soldering: 350ç for 3 seconds

No deformation of components affecting performance.

Note 1: Includes temperature rise caused by current flow.

Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range

and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation.

Note 3: This does not include the resistance of the conductor .

■Materials

Item

Part

Insulator

Material

PPS

Finish

Color : Black

Remarks

UL94V-0

Receptacle

Contact Area : Gold plating

Mounting Area : Gold plating

Contacts

Insulator

Contacts

Phosphor bronze

PPS

---------------

UL94V-0

---------------

Color : Black

Contact Area : Gold plating

Mounting Area : Solder plating

Brass

Header

Metal fitting

Eject fitting

Ground clip

Brass

Stainless steel

---------------

Applied to eject mechanism

---------------

Applied to MI21 series

■Ordering Information

●Receptacles

●Headers

MI20 - 50 RD - SF (51)

MI20 A - 50 PD R - SF - EJR (71)

1

2

3

4

5

1

2

3

4

5

6

7

8

1

2

3

4

5

1

5

Series name: MI20

Number of contacts: 50

Connector type RD: Receptacle

Contact form SF: SMT

(51): RoHS compliant

Series name

Board mounting type

Blank : Standard

✽

Ml20: for type I cards ( )

Ml21: for type I and II cards

Stand off type

R

: Reverse

2

6

7

Contact type

SF: SMT

Eject button position

EJR : Right button

EJL : Left button

Blank : None

A

: 2.2 mm

3

4

Number of contacts: 50

Connector type

PD: Header

8

(71) : RoHS compliant

( ) Can accommodate type II cards only when standard mounting is

✽

used and stand off is 0 mm.

C3

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

©

MI20/21 Series●Compact Flash Card Connectors

■Receptacle

Note 1 The coplanarity of the conductor is 0.1 mm Max.

Part Number

MI20-50RD-SF(51)

CL No.

640-7001-0-51

Number of Contacts

Packaging

Tray

RoHS

YES

50

BPCB mounting pattern

C4

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

©

MI20/21 Series●Compact Flash Card Connectors

■Headers for Type I or II Cards

49

48

●Eject button

●Offset

●Mounting style : Standard mounting

: None

No.50

No.25

No.38

No.13

No.26

No.1

43.03

MI20--50PD

No.2

No.26

0.635

No.25

No.50

31.115

40.4

No.1

2.5

t : 0.25 ∞ w : 0.25

Note 1: Coplanarity of all surface mount terminals and components is 0.1.

Note 2: Dimensions in parentheses ( ) are reference dimensions.

Part Number

MI20-50PD-SF(71)

CL No.

640-7002-2-71

Number of Contacts

Packaging

Tray

RoHS

YES

50

BPCB mounting pattern

C5

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

©

MI20/21 Series●Compact Flash Card Connectors

■Headers for Type I Cards

●Eject button

●Offset

: None

: 2.2 mm

●Mounting style : Reverse mounting

Note 1: Coplanarity of all surface mount terminals and components is 0.1.

Note 2: Dimensions in parentheses ( ) are reference dimensions.

Part Number

MI20A-50PDR-SF(71)

CL No.

640-7003-5-71

Number of Contacts

Packaging

Tray

RoHS

YES

50

BPCB mounting pattern

44±0.05

43.9±0.1

50.3±0.1

37±0.05

2.9425±0.05

50－0.4±0.03

0.635±0.03

31.115±0.05

Ｎｏ．1

C6

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

©

MI20/21 Series●Compact Flash Card Connectors

■Headers for Type I Cards

●Eject button

●Offset

: Right button

: 2.2 mm

●Mounting style : Standard mounting

Note 1: The amount of card and button protrusion from the connector after mating is 13.6 mm.

Note 2: The dimensions of mating portion of this product comply with CFA standards.

Note 3: This product can be automatically mounted. The suction surface for automatic mounting is positioned as illustrated in the figure.

This part is fixed in the initial condition, but released with a single operation of the ejector.

(Amount of actual card ejection: 3.5 mm)

3

Note 4: The coplanarity (degree of flatness) of the SMT lead tip portion and the reinforced fitting mounting end face is to be 0.1 maximum.

Note 5: Dimensions in parentheses ( ) are to be regarded as reference dimensions.

Part Number

MI20A-50PD-SF-EJR(71)

CL No.

640-7004-8-71

Number of Contacts

Packaging

Tray

RoHS

YES

50

BPCB mounting pattern

C7

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

©

MI20/21 Series●Compact Flash Card Connectors

■Headers for Type I Cards

●Eject button

●Offset

: Left side

: 2.2 mm

●Mounting style : Standard mounting

Note 1: The amount of card and button protrusion from the connector after mating is 13.6 mm.

Note 2: The dimensions of mating portion of this product comply with CFA standards.

Note 3: This product can be automatically mounted. The suction surface for automatic mounting is positioned as illustrated in the figure.

This part is fixed in the initial condition, but released with a single operation of the ejector.

(Amount of actual card ejection: 3.5 mm)

3

Note 4: The coplanarity (degree of flatness) of the SMT lead tip portion and the reinforced fitting mounting end face is to be 0.1 maximum.

Note 5: Dimensions in parentheses ( ) are to be regarded as reference dimensions.

Part Number

MI20A-50PD-SF-EJL(71)

CL No.

640-7005-0-71

Number of Contacts

Packaging

Tray

RoHS

YES

50

BPCB mounting pattern

C8

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

©

MI20/21 Series●Compact Flash Card Connectors

■Headers for Type I or II Cards

●Eject button

●Offset

: Right side

: 0 mm

●Mounting style : Standard mounting

Note 1: This item is a (standard type) header for use with CompactFlash cards.

Note 2: The dimensions of mating portion of this product comply with CFA standards.

Note 3: This product can be automatically mounted. The suction surface for automatic mounting is positioned as illustrated in the figure.

This part is fixed in the initial condition, but released with a single operation of the ejector.

(Amount of actual card ejection: 3.5 mm)

3

Note 4: The coplanarity (degree of flatness) of the SMT lead tip portion and the reinforced fitting mounting end face is to be 0.1 maximum.

Note 5: Dimensions in parentheses ( ) are to be regarded as reference dimensions.

Part Number

MI21-50PD-SF-EJR(71)

CL No.

640-7107-0-71

Number of Contacts

Packaging

Tray

RoHS

YES

50

BPCB mounting pattern

C9

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

©

MI20/21 Series●Compact Flash Card Connectors

■Headers for Type I or II Cards

●Eject button

●Offset

: Left side

: None

●Mounting style : Standard mounting

Note 1: This item is a (standard type) header for use with CompactFlash cards.

Note 2: The dimensions of mating portion of this product comply with CFA standards.

Note 3: This product can be automatically mounted. The suction surface for automatic mounting is positioned as illustrated in the figure.

This part is fixed in the initial condition, but released with a single operation of the ejector.

(Amount of actual card ejection: 3.5 mm)

3

Note 4: The coplanarity (degree of flatness) of the SMT lead tip portion and the reinforced fitting mounting end face is to be 0.1 maximum.

Note 5: Dimensions in parentheses ( ) are to be regarded as reference dimensions.

Part Number

MI21-50PD-SF-EJL(71)

CL No.

640-7108-3-71

Number of Contacts

Packaging

Tray

RoHS

YES

50

BPCB mounting pattern

C10

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

©

MI20/21 Series●Compact Flash Card Connectors

■Headers for Type I or II Cards

●Eject button

●Offset

: None

●Mounting style : Standard mounting

Note 1: This item is a (standard type) header for use with CompactFlash cards.

Note 2: The dimensions of mating portion of this product comply with CFA standards.

Note 3: The coplanarity (degree of flatness) of the SMT lead tip portion and the reinforced

fitting mounting end face is to be 0.1 maximum

Note 4: Dimensions in parentheses ( ) are to be regarded as reference dimensions.

Part Number

MI21-50PD-SF(71)

CL No.

640-7109-6-71

Number of Contacts

Packaging

Tray

RoHS

YES

50

BPCB mounting pattern

C11

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

©

MI20/21 Series●Compact Flash Card Connectors

■Headers for Type I or II Cards

●Eject button

●Offset

: None

: 0 mm

●Mounting style : Reverse mounting

Note 1: Coplanarity of all surface mount terminals and components is 0.1.

Note 2: Dimensions in parentheses ( ) are reference dimensions.

Part Number

MI21A-50PDR-SF(71)

CL No.

640-7106-8-71

Number of Contacts

Packaging

Tray

RoHS

YES

50

BPCB mounting pattern

C12

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

©

MI20/21 Series●Compact Flash Card Connectors

■Headers for Type I and II Cards

●Eject button

●Offset

: Right side

: 2.2 mm

●Mounting style : Standard mounting

Note 1: This item is a (standard type) header for use with CompactFlash cards.

Note 2: The dimensions of mating portion of this product comply with CFA standards.

Note 3: This product can be automatically mounted. The suction surface for automatic mounting is positioned as illustrated in the figure.

This part is fixed in the initial condition, but released with a single operation of the ejector.

(Amount of actual card ejection: 3.5 mm)

3

Note 4: The coplanarity (degree of flatness) of the SMT lead tip portion and the reinforced fitting mounting end face is to be 0.1 maximum.

Note 5: Dimensions in parentheses ( ) are to be regarded as reference dimensions.

Part Number

MI21A-50PD-SF-EJR(71)

CL No.

640-7101-4-71

Number of Contacts

Packaging

Tray

RoHS

YES

50

BPCB mounting pattern

C13

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

©

MI20/21 Series●Compact Flash Card Connectors

■Headers for Type I and II Cards

●Eject button

●Offset

: Left button

: 2.2 mm

●Mounting style : Standard mounting

Note 1: This item is a (standard type) header for use with CompactFlash cards.

Note 2: The dimensions of mating portion of this product comply with CFA standards.

Note 3: This product can be automatically mounted. The suction surface for automatic mounting is positioned as illustrated in the figure.

This part is fixed in the initial condition, but released with a single operation of the ejector.

(Amount of actual card ejection: 3.5 mm)

3

Note 4: The coplanarity (degree of flatness) of the SMT lead tip portion and the reinforced fitting mounting end face is to be 0.1 maximum.

Note 5: Dimensions in parentheses ( ) are to be regarded as reference dimensions.

Part Number

MI21A-50PD-SF-EJL(71)

CL No.

640-7102-7-71

Number of Contacts

Packaging

Tray

RoHS

YES

50

BPCB mounting pattern

C14

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

©

MI20/21 Series●Compact Flash Card Connectors

■Headers for Type I and II Cards

●Eject button

●Offset

: None

: 2.2 mm

●Mounting style : Standard mounting

Note 1: Coplanarity of all surface mount terminals and components is 0.1.

Note 2: Dimensions in parentheses ( ) are reference dimensions.

Part Number

MI21A-50PD-SF(71)

CL No.

640-7103-0-71

Number of Contacts

Packaging

Tray

RoHS

YES

50

BPCB mounting pattern

C15

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

©

MI20/21 Series●Compact Flash Card Connectors

BTemperature Profile

Applicable Conditions

:

Reflow system

Solde

IR reflow

Paste type 96.5% Sn / 3.0% Ag / 0.5% Cu

Test board Glass epoxy 60mm x 60mm x 1.6 mm

Metal mask thickness: 0.15 mm

Recommended temperature profile.

The temperature may be slightly changed according to the

solder paste type and amount.

C16

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

©

MI20/21 Series●Compact Flash Card Connectors

BPrecautions for Use

1. Differentiate the side of the card at the time of CF card insertion. This product is furnished with an wrong insertion

prevention mechanism which is compliant with CFA standards, but forced wrong insertion of the card may cause

damage to the card.

2. Do not move the CF card up and down when it has been partially inserted. It may cause damage to the connector

and card.

Up

CF Card

Down

3. The package used for this product is the soft tray. We recommend a check before mounting, since the

adjustment may be reqaired depending on the type of mounter. For more detailed information, please

contact nearest Hirose account representative.

BWashing Conditions

This product is a no-wash item, but in the case of washing, please observe the following conditions.

1. Organic Solvent Washing

Room temperature washing

Heated washing

Solvent

IPA (Isopropyl alcohol)

YES

HCFC (Hydrochlorofluorocarbon)

2. Water Type Washing

When using water type cleaning agents (e.g., terpene, and alkali saponifiers), select the cleaning agent

based on the documentation issued by the various manufacturers of cleaning agents which describes the

effects on metals and resins.

Be careful that parts are not left with moisture remaining on them.

3. Washing Precautions

Residual flux or cleaning agent on the contacts when washing with organic solvents or water type

cleaners can give rise to the deterioration of electrical performance. In this regard it is important to check

whether a thorough washing has been performed.

C17


型号：	MI21A-50PD-SF(83)
厂家：	HRS
描述：	PCMCIA Connector, 50 Contact(s), Male/Female, Right Angle, Surface Mount Terminal, Black Insulator PC 连接器
文件：	总16页 (文件大小：443K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MI21A-50PD-SF(83) [HRS]

相关型号：

MI21A-50PD-SF(91)

MI21A-50PD-SF-EJL

MI21A-50PD-SF-EJR

MI21A-50PD-SF-EJR(91)

MI21A-50PD-SF-EJR31

MI21A-50PD-SF31

MI21A-50PD-SFEJL

MI21A-50PD-SFEJL31

MI21A-50PDR-SF

MI21A-50PDR-SF-EJL

MI21A-50PDR-SF-EJR

MI21A-50PDR-SF-EJR31