MQ172-4SA11 [HRS]
Micro-Miniature Interface Connectors For Power Supply/Signaling; 微小型接口连接器的电源/信号型号: | MQ172-4SA11 |
厂家: | HRS |
描述: | Micro-Miniature Interface Connectors For Power Supply/Signaling |
文件: | 总7页 (文件大小:372K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
NEW
Micro-Miniature Interface Connectors For Power Supply/Signaling
MQ172 Series
3 positon size
4 position size
■Fatures
Space saving
[3 Position type]
1. Ultra Miniature/Low Profile SMT Design
With dimensions of 3.9mm(H) x 6.4mm (W) x 6mm (D) for the 3
contact type, this series is ideal for today’s miniature, lightweight
electronic products.
2. Automatic Mounting:
SMT receptacles are packaged in embossed tape and reel for
automatic pick and place installation.
3. Reliable contact:
The 2-point contact design and lead construction provide a contact
which is resistant to vibration and shocks.
4. High current capacity:
Unique contact design ensures high current capacity (e.g., 3A for 3-
position), small as it is.
5. Positive Locking
Applications
Use of a snap-lock system provides the sensation of locking at
the time of insertion.
6. Wide variety of suitable cables:
A wide selection of cable types can be utilized since the plug is
of the soldered wiring type.
Additionally, the plug case and cord bushing are integrated into
a one piece body, allowing for easy assembly by simply
pressing the case into place after the harness work.
6. Keys for preventing incorrect insertion:
Both 3 and 4-contact types have keys to prevent incorrect
insertion.
■Applications
Portable remote terminals, portable telephones, PHS(personal handy
phone system), Notebook PCs, Electronic measuring instruments, etc.
99.4
1
■Product Specifications
Rated Current: 3A (Note.1)
Applicable Temperature Range:
-30ç - +75ç
RATINGS
Rated Voltage: DC 30V or less
AC 40V or less
DESCRIPTION
SPECIFICATIONS
1000Mø or more
No flashover/dielectric Breakdown
30m or less
REQUIREMENTS
1. Insulation resistance
2. Voltage resistance
3. Contact resistance
4. Vibration
Should be measured at DC 100V.
Should be powered at AC 250V for 1 minute.
Measured at 10mA.
ø
No instantaneous electric
10~55Hz, one-sided amplitude 0.75mm, 3
directions for 2 hours, respectively
resistance
Disconnection of 1µsec or more
5. Humidity
Contact resistance: 50m
ø
or less
or more
Leave under the condition of 40±2ç in temperature
and of 90-95% in humidity for 96 hours.
resistance
Insulation resistance: 10M
ø
(-55
ç
: 30 minutes→15-35
ç
:max. 5 minutes→85
ç:
6. Temperature cycle
Contact resistance: 50mø or less
30 minutes→ 15-35
ç:max. 5 minutes) 5 cycles
Insulation resistance: 1000Mø or more
Contact resistance: 50mø or less
7. Plugging/ unplugging life
8. Heat resistance of
soldering
5,000 times
No fusion of resin section affecting performance
SMT type
manual soldering
(receptacle and
plug)
reflow: at recommended temp. profile
Temperature of soldering iron:
350ç3 sec.
(Note.1) For 4-contact type, rated current is 2A, or 3A for optional 2 terminals and 0.5A for other 2 terminals.
(Note.2) Above-stated specifications are typical of this series. For respective formal contract, please refer to "Delivery
Specifications".
■Material Quality
Remarks
Parts
Material
Synthetic resin
Phosphor
Processing
Dielectric
Terminal
Black color
UL94V-0
Engagement area...Gold plating of 0.2∫
Lead section...Solder-plating
Black color
bronze
Cover case(plug)
Synthetic resin
Stainless steel
Stainless steel
UL94V-0
Metal fittings(receptacle)
Lock case(plug)
■Product Number Configuration
This is available for you to determine the product specifications from its format.
When ordering, please select any one among all formats shown in page 3-4 of this catalog.
●RECEPTACLE
1
2
Series name: MQ172
Series configuration symbol: none...unshielded type
X ...shielded type
MQ172 X - 4 P A (11)
1
2
3
4
5
6
3
4
Number of contacts: 3, 4
Connector type: P...receptacle
S...plug
●PLUG
5
6
Key type symbol: A (only for A type)
Packing type: none...tray-based packing
(11)...embossed tape packing
Cover case type: CV...standard product (color: black)
MQ172 X - 4 S A - CV
1
2
3
4
5
7
7
2
■Plugs
●3-Position type
Parts No.
HRS No.
MQ172-3SA-CV
CL206-0951-7
●4-Position type
Parts No.
HRS No.
MQ172X-4SA-CV
CL206-2001-9
■Harness Tool
Tool name
Parts No.
HRS No.
Parts name of adaptive plugs
MQ172-3SA-CV
Adaptive cable
Outside diameter:Ø3.5
AWG#24-#32
MQ172-3S/CK-MP
MQ172-4S/CK-MP
CL902-2069-4
CL902-2070-3
Cable caulking jig
MQ172X-4SA-CV
(Note.) As the crimp height after crimping depends on cable type, please consult factory about your designated cable.
3
■Receptacles
●3-Position type
Parts No.
HRS No.
✽ ✽
✽ ✽
)
MQ172-3PA-(
)
CL206-0950-4(
✽ ✽none : tray-based packing
11 : embossed tape packing
(1 reel = 1,000 roles)
B
Illustration Of Receptacle
Set Installed
●4-Position type
(Note.) For MQ172, mounting to circuit boards
is SMT type.
For the purpose of more adequate fixing
against external force,it is desirable to
affix the entire set after setting as shown
in the figure above.
Parts No.
HRS No.
✽ ✽
✽ ✽
)
MQ172X-4PA-(
)
CL206-2000-6(
✽ ✽none : tray-based packing
11 : embossed tape packing
(1 reel = 1,000 roles)
4
BRecommended Land Pattern Dimensions Diagram
●3-Position type
●4-Position type
Note.) Mounting of this product to circuit boards is the SMT type.
To provide more adequate fixing, use of adhesive for board-installed area is recommended.
5
BEmbossed Tape Carrier Dimensions Diagam(JIS-C-0806 dependent)
●Carrier Dimensions Diagram
(Note.) The figure above provides the case of a 3 contact type, dimensions
shown in such figure are the same as those of a 4 contact type.
●Reel Status Diagram
6
BRecommended Temperature Profile
(soldering requirements)
●Board
Dimensions: 50X33X0.8(mm)
Material: glass epoxy
●Cream soldering
Composition:63Sn/37Pb
(flux content: 10Wt%)
Metal mask thickness: 0.15mm
●Reflow method
IR reflow
●Measurement spot of setting temperature
Housing (mold) surface
BCleaning Requirements
(1) Organic solvent-based cleaning
Solvent
Normal temp.
YES
Heating
YES
IPA
(Isopropyl Alcohol)
HCFC
YES
YES
(Hydro-chloro-fluoric carbon)
(2) Water-based cleaning
When using water-based detergent (e.g., terpene or alkali saponifier,etc.), select appropriate detergent
on the basis of those lists describing effects on metals/resins issued by each detergent manufacturer.
Further be careful not to leave any moisture.
(3) Cautions on cleaning
In cleaning with organic solvent or water-based detergent, residual flux or detergent on the
connector may cause excessive degradation of electrical performance. Check fully that reliable
cleaning is provided.
7
相关型号:
MQ172X-4PA(30)
Telecom and Datacom Connector, 4 Contact(s), Female, Right Angle, Surface Mount Terminal,
HRS
©2020 ICPDF网 联系我们和版权申明